void Send_4Bit_Num(unsigned short num)
{
UART1_SendByte(num/1000 + 0x30);
UART1_SendByte(num%1000/100 + 0x30);
UART1_SendByte(num%100/10 + 0x30);
UART1_SendByte(num%10 + 0x30);
}
//This function is UART0 Receive ISR. This functions is called whenever UART0 receives any data
void vsend(void *pvparam)
{
while(1)
{
UART1_SendStr(sen_dat);
UART1_SendByte(0x00);
UART1_SendByte(0xFF);
vTaskDelay(1000);
}
}
void UART1_SendString(unsigned char * data)
{
do
{
UART1_SendByte(*data);
}
while(*++data != '\0');
}
void UART1_SendStr(char *str)
{
while (*str != '\0')
{
UART1_SendByte(*str++); // 發送數據
while (!(IFG2 & UTXIFG1));
}
}
/*******************************************************************************
* 名称: fputc
* 功能: 重定向c库函数printf到UART1
* 形参: 无
* 返回: 要打印的字符
* 说明: 由printf调用
******************************************************************************/
int fputc(int ch, FILE *f)
{
/* 将Printf内容发往串口 */
UART1_SendByte(ch);
return (ch);
}
/*******************************************************************************************
* 函数名：UART1_SendString()
* 参数 ：uint8_t *s 指向字符串的指针
* 返回值：void
* 描述 ：UART1发送字符串函数
*********************************************************************************************/
void UART1_SendString(uint8_t *s)
{
while(*s) //判断是否到字符串末尾
{
UART1_SendByte(*s); //发送指针当前所指的字节
s++; //地址加1
}
}
/*******************************************************************************************
* 函数名：UART1_Handler()
* 参数 ：void
* 返回值：void
* 描述 ：UART1中断服务函数
*********************************************************************************************/
void UART1_Handler(void)
{
uint8_t temp;
if((UART1->UART_SR& UART_SR_RXRDY)==1)
{ //接收数据中断
temp= UART1->UART_RHR&0xff; //接收一个字节
UART1_SendByte(temp); //将接收的数据发回
}
}
void Flash_eeprom_readwrite_Test(void)
{
TestStatus OperationStatus;
u32 add, start_add, stop_add =0;
u8 WriteBuffer[FLASH_BLOCK_SIZE];
u8 new_value[FLASH_BLOCK_SIZE] = "This is a Flash_eeprom write and read example......\
This is a Flash_eeprom write and read example....---lingguansheng---2012-2-20";
u8 block, i=0 ;
/* Fill the buffer in RAM */
for (i = 0; i < FLASH_BLOCK_SIZE; i++) WriteBuffer[i] =new_value[i];
/* Program the block 0*/
block = 0; /* block 0 is first block of Data memory: address is 0x4000 */
FLASH_ProgramBlock(block, FLASH_MEMTYPE_DATA, FLASH_PROGRAMMODE_STANDARD, WriteBuffer);
FLASH_WaitForLastOperation(FLASH_MEMTYPE_DATA);
/* Check the programmed block */
start_add = FLASH_DATA_START_PHYSICAL_ADDRESS;
stop_add = FLASH_DATA_START_PHYSICAL_ADDRESS + (u32)FLASH_BLOCK_SIZE;
for (add = start_add; add < stop_add; add++)
{
if (FLASH_ReadByte(add) != new_value[add-start_add])
{
/* Error */
OperationStatus = FAILED;
/* OperationStatus = PASSED, if the data written/read to/from DATA EEPROM memory is correct */
/* OperationStatus = FAILED, if the data written/read to/from DATA EEPROM memory is corrupted */
while (1);
}
}
for (add = start_add; add < stop_add; add++)
{
UART1_SendByte(FLASH_ReadByte(add));
Delay(0xffff);
}
}
void ReadyMeasure(void)
{
int i;
UART1_SendByte(0xC0);
for(i=0;i<5;i++)
{
delay(1000);
}
UART1_SendByte(0xC1);
delay(50);
// UART1_SendByte(0X31);
UART1_SendByte(0X03);
UART1_SendByte(0X00);
UART1_SendByte(0X04);
UART1_SendByte(0X00);
}
/**
* @brief Send Data.
* @param *Data: Data address.
* @param len: Data length.
* @retval None
*/
void UART1_SendString(uint8_t* Data, uint32_t len)
{
int32_t i=0;
for (; i<len; i++) UART1_SendByte(Data[i]);
}
/*******************************************************************************
* 名称: UART1_SendString
* 功能: UART1发送len个字符
* 形参: data -> 指向要发送的字符串
* len -> 要发送的字节数
* 返回: 无
* 说明: 无
******************************************************************************/
void UART1_SendString(u8* Data,u16 len)
{
u16 i=0;
for(; i < len; i++)
UART1_SendByte(Data[i]); /* 循环调用发送一个字符函数 */
}
