Exemplo n.º 1
1
int main(int argc, char **argv)
{
    signal(SIGINT, stopHandler);
    signal(SIGTERM, stopHandler);

    UA_Server *server = UA_Server_new();
    UA_ServerConfig *config = UA_Server_getConfig(server);
    UA_ServerConfig_setDefault(config);

    config->customDataTypes = &customTypesArray;

    UA_StatusCode retval;
    /* create nodes from nodeset */
    if(namespace_testnodeset_generated(server) != UA_STATUSCODE_GOOD) {
        UA_LOG_ERROR(UA_Log_Stdout, UA_LOGCATEGORY_SERVER,
                     "Could not add the example nodeset. "
                     "Check previous output for any error.");
        retval = UA_STATUSCODE_BADUNEXPECTEDERROR;
    } else {
        UA_Variant out;
        UA_Variant_init(&out);
        UA_Server_readValue(server, UA_NODEID_NUMERIC(2, 10002), &out);
        UA_Point *p = (UA_Point *)out.data;
        printf("point 2d x: %f y: %f \n", p->x, p->y);
        retval = UA_Server_run(server, &running);
    }

    UA_Server_delete(server);
    return retval == UA_STATUSCODE_GOOD ? EXIT_SUCCESS : EXIT_FAILURE;
}
static int
run(UA_String *transportProfile, UA_NetworkAddressUrlDataType *networkAddressUrl) {
    signal(SIGINT, stopHandler);
    signal(SIGTERM, stopHandler);

    UA_Server *server = UA_Server_new();
    UA_ServerConfig *config = UA_Server_getConfig(server);
    UA_ServerConfig_setMinimal(config, 4801, NULL);

    /* Details about the PubSubTransportLayer can be found inside the
     * tutorial_pubsub_connection */
    config->pubsubTransportLayers = (UA_PubSubTransportLayer *)
        UA_calloc(2, sizeof(UA_PubSubTransportLayer));
    if(!config->pubsubTransportLayers) {
        UA_Server_delete(server);
        return EXIT_FAILURE;
    }
    config->pubsubTransportLayers[0] = UA_PubSubTransportLayerUDPMP();
    config->pubsubTransportLayersSize++;
#ifdef UA_ENABLE_PUBSUB_ETH_UADP
    config->pubsubTransportLayers[1] = UA_PubSubTransportLayerEthernet();
    config->pubsubTransportLayersSize++;
#endif

    UA_PubSubConnectionConfig connectionConfig;
    memset(&connectionConfig, 0, sizeof(connectionConfig));
    connectionConfig.name = UA_STRING("UADP Connection 1");
    connectionConfig.transportProfileUri = *transportProfile;
    connectionConfig.enabled = UA_TRUE;
    UA_Variant_setScalar(&connectionConfig.address, networkAddressUrl,
                         &UA_TYPES[UA_TYPES_NETWORKADDRESSURLDATATYPE]);
    UA_NodeId connectionIdent;
    UA_StatusCode retval =
        UA_Server_addPubSubConnection(server, &connectionConfig, &connectionIdent);
    if(retval == UA_STATUSCODE_GOOD)
        UA_LOG_INFO(UA_Log_Stdout, UA_LOGCATEGORY_SERVER,
                    "The PubSub Connection was created successfully!");

    /* The following lines register the listening on the configured multicast
     * address and configure a repeated job, which is used to handle received
     * messages. */
    UA_PubSubConnection *connection =
        UA_PubSubConnection_findConnectionbyId(server, connectionIdent);
    if(connection != NULL) {
        UA_StatusCode rv = connection->channel->regist(connection->channel, NULL, NULL);
        if (rv == UA_STATUSCODE_GOOD) {
            UA_UInt64 subscriptionCallbackId;
            UA_Server_addRepeatedCallback(server, (UA_ServerCallback)subscriptionPollingCallback,
                                          connection, 100, &subscriptionCallbackId);
        } else {
            UA_LOG_WARNING(UA_Log_Stdout, UA_LOGCATEGORY_SERVER, "register channel failed: %s!",
                           UA_StatusCode_name(rv));
        }
    }

    retval |= UA_Server_run(server, &running);

    UA_Server_delete(server);
    return retval == UA_STATUSCODE_GOOD ? EXIT_SUCCESS : EXIT_FAILURE;;
}
Exemplo n.º 3
0
int main(int argc, char** argv) {
    signal(SIGINT,  stopHandler);
    signal(SIGTERM, stopHandler);

    UA_ServerConfig config = UA_ServerConfig_standard;
    UA_ServerNetworkLayer nl;
    nl = UA_ServerNetworkLayerUDP(UA_ConnectionConfig_standard, 16664);
    config.networkLayers = &nl;
    config.networkLayersSize = 1;
    UA_Server *server = UA_Server_new(config);

    // add a variable node to the adresspace
    UA_VariableAttributes attr;
    UA_VariableAttributes_init(&attr);
    UA_Int32 myInteger = 42;
    UA_Variant_setScalar(&attr.value, &myInteger, &UA_TYPES[UA_TYPES_INT32]);
    attr.description = UA_LOCALIZEDTEXT("en_US","the answer");
    attr.displayName = UA_LOCALIZEDTEXT("en_US","the answer");
    UA_NodeId myIntegerNodeId = UA_NODEID_STRING(1, "the.answer");
    UA_QualifiedName myIntegerName = UA_QUALIFIEDNAME(1, "the answer");
    UA_NodeId parentNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER);
    UA_NodeId parentReferenceNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES);
    UA_Server_addVariableNode(server, myIntegerNodeId, parentNodeId,
                              parentReferenceNodeId, myIntegerName,
                              UA_NODEID_NULL, attr, NULL, NULL);

    UA_StatusCode retval = UA_Server_run(server, &running);
    UA_Server_delete(server);

    return (int) retval;
}
Exemplo n.º 4
0
int main(int argc, char** argv) {
    signal(SIGINT, stopHandler); /* catches ctrl-c */

    UA_ServerConfig config = UA_ServerConfig_standard;
    UA_ServerNetworkLayer nl = UA_ServerNetworkLayerTCP(UA_ConnectionConfig_standard, 16664);
    config.networkLayers = &nl;
    config.networkLayersSize = 1;
    UA_Server *server = UA_Server_new(config);

    /* add a variable node to the address space */
    UA_Int32 myInteger = 42;
    UA_NodeId myIntegerNodeId = UA_NODEID_STRING(1, "the.answer");
    UA_QualifiedName myIntegerName = UA_QUALIFIEDNAME(1, "the answer");
    UA_DataSource dateDataSource = (UA_DataSource) {
        .handle = &myInteger, .read = readInteger, .write = writeInteger};
    UA_VariableAttributes attr;
    UA_VariableAttributes_init(&attr);
    attr.description = UA_LOCALIZEDTEXT("en_US","the answer");
    attr.displayName = UA_LOCALIZEDTEXT("en_US","the answer");

    UA_Server_addDataSourceVariableNode(server, myIntegerNodeId,
                                        UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER),
                                        UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES),
                                        myIntegerName, UA_NODEID_NULL, attr, dateDataSource, NULL);

    UA_StatusCode retval = UA_Server_run(server, &running);
    UA_Server_delete(server);
    nl.deleteMembers(&nl);

    return (int)retval;
}
static void teardown(void) {
    running = false;
    THREAD_JOIN(server_thread);
    UA_Server_run_shutdown(server);
    UA_Server_delete(server);
    UA_ServerConfig_delete(config);
}
Exemplo n.º 6
0
static void teardown_register(void) {
    *running_register = false;
    THREAD_JOIN(server_thread_register);
    UA_Server_run_shutdown(server_register);
    UA_Boolean_delete(running_register);
    UA_Server_delete(server_register);
}
Exemplo n.º 7
0
static void teardown_lds(void) {
    *running_lds = false;
    THREAD_JOIN(server_thread_lds);
    UA_Server_run_shutdown(server_lds);
    UA_Boolean_delete(running_lds);
    UA_Server_delete(server_lds);
}
Exemplo n.º 8
0
static void teardown_server(void) {
    *running_translate_browse = false;
    pthread_join(server_thread_translate_browse, NULL);
    UA_Server_run_shutdown(server_translate_browse);
    UA_Boolean_delete(running_translate_browse);
    UA_Server_delete(server_translate_browse);
    UA_ServerConfig_delete(server_translate_config);
}
Exemplo n.º 9
0
static void teardown(void) {
    *running = false;
    pthread_join(server_thread, NULL);
    UA_Server_run_shutdown(server);
    UA_Boolean_delete(running);
    UA_Server_delete(server);
    UA_ServerConfig_delete(config);
}
Exemplo n.º 10
0
END_TEST

START_TEST(Server_new_shutdown_delete) {
        UA_Server *pServer = UA_Server_new();
        configure_lds_server(pServer);
        UA_StatusCode retval = UA_Server_run_shutdown(pServer);
        ck_assert_uint_eq(retval, UA_STATUSCODE_GOOD);
        UA_Server_delete(pServer);
}
Exemplo n.º 11
0
int main(void) {
    signal(SIGINT, stopHandler);
    signal(SIGTERM, stopHandler);

    UA_ServerConfig *config = UA_ServerConfig_new_minimal(4801, NULL);
    /* Details about the PubSubTransportLayer can be found inside the
     * tutorial_pubsub_connection */
    config->pubsubTransportLayers = (UA_PubSubTransportLayer *)
        UA_malloc(sizeof(UA_PubSubTransportLayer));
    if (!config->pubsubTransportLayers) {
        UA_ServerConfig_delete(config);
        return -1;
    }
    config->pubsubTransportLayers[0] = UA_PubSubTransportLayerUDPMP();
    config->pubsubTransportLayersSize++;
    UA_Server *server = UA_Server_new(config);

    UA_PubSubConnectionConfig connectionConfig;
    memset(&connectionConfig, 0, sizeof(connectionConfig));
    connectionConfig.name = UA_STRING("UDP-UADP Connection 1");
    connectionConfig.transportProfileUri =
        UA_STRING("http://opcfoundation.org/UA-Profile/Transport/pubsub-udp-uadp");
    connectionConfig.enabled = UA_TRUE;
    UA_NetworkAddressUrlDataType networkAddressUrl =
        {UA_STRING_NULL , UA_STRING("opc.udp://224.0.0.22:4840/")};
    UA_Variant_setScalar(&connectionConfig.address, &networkAddressUrl,
                         &UA_TYPES[UA_TYPES_NETWORKADDRESSURLDATATYPE]);
    UA_NodeId connectionIdent;
    UA_StatusCode retval =
        UA_Server_addPubSubConnection(server, &connectionConfig, &connectionIdent);
    if(retval == UA_STATUSCODE_GOOD)
        UA_LOG_INFO(UA_Log_Stdout, UA_LOGCATEGORY_SERVER,
                    "The PubSub Connection was created successfully!");

    /* The following lines register the listening on the configured multicast
     * address and configure a repeated job, which is used to handle received
     * messages. */
    UA_PubSubConnection *connection =
        UA_PubSubConnection_findConnectionbyId(server, connectionIdent);
    if(connection != NULL) {
        UA_StatusCode rv = connection->channel->regist(connection->channel, NULL);
        if (rv == UA_STATUSCODE_GOOD) {
            UA_UInt64 subscriptionCallbackId;
            UA_Server_addRepeatedCallback(server, (UA_ServerCallback)subscriptionPollingCallback,
                                          connection, 100, &subscriptionCallbackId);
        } else {
            UA_LOG_WARNING(UA_Log_Stdout, UA_LOGCATEGORY_SERVER, "register channel failed: %s!",
                           UA_StatusCode_name(rv));
        }
    }

    retval |= UA_Server_run(server, &running);
    UA_Server_delete(server);
    UA_ServerConfig_delete(config);
    return (int)retval;
}
Exemplo n.º 12
0
//#######################################MAIN#######################################
int main(int argc, char** argv) {
    signal(SIGINT, stopHandler); /* catches ctrl-c */


    if (gpioInitialise() < 0)
   {
      fprintf(stderr, "pigpio initialisation failed\n");
      return 1;

}

    gpioSetMode(17, PI_OUTPUT);
    gpioSetMode(22, PI_INPUT);
    gpioSetMode(24, PI_OUTPUT);


    UA_ServerConfig config = UA_ServerConfig_standard;
    UA_ServerNetworkLayer nl = UA_ServerNetworkLayerTCP(UA_ConnectionConfig_standard, 16664);
    config.networkLayers = &nl;
    config.networkLayersSize = 1;
    UA_Server *server = UA_Server_new(config);

 /* add a variable node to the address space */
    UA_Int32 myIntegerB = 32;
    UA_NodeId myIntegerBNodeId = UA_NODEID_STRING(1, "button");
    UA_QualifiedName myIntegerBName = UA_QUALIFIEDNAME(1, "button");
    UA_DataSource dateDataSource = (UA_DataSource) {
        .handle = &myIntegerB, .read = readIntegerB, .write = writeIntegerB};
    UA_VariableAttributes attr;
    UA_VariableAttributes_init(&attr);
    attr.description = UA_LOCALIZEDTEXT("en_US","button_on_off");
    attr.displayName = UA_LOCALIZEDTEXT("en_US","button");

    UA_Server_addDataSourceVariableNode(server, myIntegerBNodeId,
                                        UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER),
                                        UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES),
                                        myIntegerBName, UA_NODEID_NULL, attr, dateDataSource, NULL);



 /* add a repeated job to the server */
    UA_Job job = {.type = UA_JOBTYPE_METHODCALL,
                  .job.methodCall = {.method = testCallback, .data = NULL} };
    UA_Server_addRepeatedJob(server, job, 2000, NULL); // call every 2 sec




    UA_StatusCode retval = UA_Server_run(server, &running);
    UA_Server_delete(server);
    nl.deleteMembers(&nl);


    return (int)retval;
}
Exemplo n.º 13
0
static void teardown(void) {
    removeSubscription();
    *running = false;
    THREAD_JOIN(server_thread);
    UA_Server_run_shutdown(server);
    UA_Boolean_delete(running);
    UA_Server_delete(server);
    UA_ServerConfig_delete(config);
    UA_Array_delete(selectClauses, nSelectClauses, &UA_TYPES[UA_TYPES_SIMPLEATTRIBUTEOPERAND]);

    UA_Client_disconnect(client);
    UA_Client_delete(client);
}
Exemplo n.º 14
0
int main(int argc, char* argv[]) {
    signal(SIGINT, stopHandler);
    signal(SIGTERM, stopHandler);

    if(argc < 3) {
        UA_LOG_FATAL(UA_Log_Stdout, UA_LOGCATEGORY_USERLAND,
                     "Missing arguments. Arguments are "
                     "<server-certificate.der> <private-key.der> "
                     "[<trustlist1.crl>, ...]");
        return 1;
    }

    /* Load certificate and private key */
    UA_ByteString certificate = loadFile(argv[1]);
    UA_ByteString privateKey = loadFile(argv[2]);

    /* Load the trustlist */
    size_t trustListSize = 0;
    if(argc > 3)
        trustListSize = (size_t)argc-3;
    UA_STACKARRAY(UA_ByteString, trustList, trustListSize);
    for(size_t i = 0; i < trustListSize; i++)
        trustList[i] = loadFile(argv[i+3]);

    /* Loading of a revocation list currently unsupported */
    UA_ByteString *revocationList = NULL;
    size_t revocationListSize = 0;

    UA_ServerConfig *config =
        UA_ServerConfig_new_basic128rsa15(4840, &certificate, &privateKey,
                                          trustList, trustListSize,
                                          revocationList, revocationListSize);
    UA_ByteString_deleteMembers(&certificate);
    UA_ByteString_deleteMembers(&privateKey);
    for(size_t i = 0; i < trustListSize; i++)
        UA_ByteString_deleteMembers(&trustList[i]);

    if(!config) {
        UA_LOG_FATAL(UA_Log_Stdout, UA_LOGCATEGORY_USERLAND,
                     "Could not create the server config");
        return 1;
    }

    UA_Server *server = UA_Server_new(config);
    UA_StatusCode retval = UA_Server_run(server, &running);
    UA_Server_delete(server);
    UA_ServerConfig_delete(config);
    return (int)retval;
}
Exemplo n.º 15
0
int main(void) {
    signal(SIGINT, stopHandler);
    signal(SIGTERM, stopHandler);

    UA_ServerConfig *config = UA_ServerConfig_new_default();
    UA_Server *server = UA_Server_new(config);

    /* Add a repeated callback to the server */
    UA_Server_addRepeatedCallback(server, testCallback, NULL, 2000, NULL); /* call every 2 sec */

    UA_StatusCode retval = UA_Server_run(server, &running);
    UA_Server_delete(server);
    UA_ServerConfig_delete(config);
    return (int)retval;
}
Exemplo n.º 16
0
int main (void) {
    /* default server values */
    signal(SIGINT, stopHandler);
    signal(SIGTERM, stopHandler);

    UA_ServerConfig *config = UA_ServerConfig_new_default();
    UA_Server *server = UA_Server_new(config);

    addNewEventType(server);
    addGenerateEventMethod(server);

    UA_StatusCode retval = UA_Server_run(server, &running);
    UA_Server_delete(server);
    UA_ServerConfig_delete(config);
    return retval == UA_STATUSCODE_GOOD ? EXIT_SUCCESS : EXIT_FAILURE;
}
Exemplo n.º 17
0
int main(void) {
    signal(SIGINT, stopHandler);
    signal(SIGTERM, stopHandler);

    UA_ServerConfig *config = UA_ServerConfig_new_default();
    UA_Server *server = UA_Server_new(config);

    addVariableType2DPoint(server);
    addVariable(server);
    addVariableFail(server);
    writeVariable(server);

    UA_StatusCode retval = UA_Server_run(server, &running);
    UA_Server_delete(server);
    UA_ServerConfig_delete(config);
    return (int)retval;
}
int main(void) {
    signal(SIGINT, stopHandler);
    signal(SIGTERM, stopHandler);

    UA_Server *server = UA_Server_new();
    UA_ServerConfig_setDefault(UA_Server_getConfig(server));

    addVariableType2DPoint(server);
    addVariable(server);
    addVariableFail(server);
    writeVariable(server);

    UA_StatusCode retval = UA_Server_run(server, &running);

    UA_Server_delete(server);
    return retval == UA_STATUSCODE_GOOD ? EXIT_SUCCESS : EXIT_FAILURE;
}
Exemplo n.º 19
0
int main(int argc, char** argv) {
    signal(SIGINT, stopHandler); /* catches ctrl-c */

    UA_ServerConfig config = UA_ServerConfig_standard;
    UA_ServerNetworkLayer nl = UA_ServerNetworkLayerTCP(UA_ConnectionConfig_standard, 16664);
    config.networkLayers = &nl;
    config.networkLayersSize = 1;
    UA_Server *server = UA_Server_new(config);

    /* add a repeated job to the server */
    UA_Job job = {.type = UA_JOBTYPE_METHODCALL,
                  .job.methodCall = {.method = testCallback, .data = NULL} };
    UA_Server_addRepeatedJob(server, job, 2000, NULL); // call every 2 sec

    UA_StatusCode retval = UA_Server_run(server, &running);
    UA_Server_delete(server);
    nl.deleteMembers(&nl);
    return (int)retval;
}
static void teardown(void) {
    /* cleanup */
    UA_Client_disconnect(client);
    UA_Client_delete(client);
    running = false;
    THREAD_JOIN(server_thread);
    UA_NodeId_deleteMembers(&parentNodeId);
    UA_NodeId_deleteMembers(&parentReferenceNodeId);
    UA_NodeId_deleteMembers(&outNodeId);
    UA_Server_run_shutdown(server);
    UA_Server_delete(server);
#ifdef UA_ENABLE_HISTORIZING
    UA_free(gathering);
#endif
    if (!MUTEX_DESTROY(serverMutex)) {
        fprintf(stderr, "Server mutex was not destroyed correctly.\n");
        exit(1);
    }
}
Exemplo n.º 21
0
int main(int argc, char** argv)
{
    signal(SIGINT, signalHandler); /* catch ctrl-c */

    /* Create a server with one network layer listening on port 4840 */
    UA_ServerConfig config = UA_ServerConfig_standard;
    UA_ServerNetworkLayer nl = UA_ServerNetworkLayerTCP(UA_ConnectionConfig_standard, 4840);
    config.networkLayers = &nl;
    config.networkLayersSize = 1;
    UA_Server *server = UA_Server_new(config);

    /* Add a variable node */
    UA_VariableAttributes attr;
    UA_VariableAttributes_init(&attr);
    attr.displayName = UA_LOCALIZEDTEXT("en_US", "Test Var");
    UA_Int32 myInteger = 2572;
    UA_Variant_setScalar(&attr.value, &myInteger, &UA_TYPES[UA_TYPES_INT32]);

    UA_NodeId newNodeId = UA_NODEID_STRING(1, "Test.Var");
    UA_NodeId parentNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER);
    UA_NodeId parentReferenceNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES);
    UA_NodeId variableType = UA_NODEID_NULL; /* take the default variable type */
    UA_QualifiedName browseName = UA_QUALIFIEDNAME(1, "Test Node");


    UA_DataSource dateDataSource = (UA_DataSource) {.handle = &myInteger, .read = onRead, .write = NULL};

    UA_Server_addDataSourceVariableNode(server, newNodeId,
                                        parentNodeId, parentReferenceNodeId,
                                        browseName, UA_NODEID_NULL, attr, dateDataSource, NULL);

    UA_Job job = {.type = UA_JOBTYPE_METHODCALL,
                  .job.methodCall = {.method = testCallback, .data = NULL} };
    UA_Server_addRepeatedJob(server, job, 2000, NULL); // call every 2 sec


    /* Run the server loop */
    UA_StatusCode status = UA_Server_run(server, &running);
    UA_Server_delete(server);
    nl.deleteMembers(&nl);
    return status;
}
Exemplo n.º 22
0
int main(void) {
    signal(SIGINT, stopHandler);
    signal(SIGTERM, stopHandler);

    UA_ServerConfig *config = UA_ServerConfig_new_default();
    UA_Server *server = UA_Server_new(config);

    manuallyDefinePump(server);
    defineObjectTypes(server);
    addPumpObjectInstance(server, "pump2");
    addPumpObjectInstance(server, "pump3");
    addPumpTypeConstructor(server);
    addPumpObjectInstance(server, "pump4");
    addPumpObjectInstance(server, "pump5");

    UA_StatusCode retval = UA_Server_run(server, &running);
    UA_Server_delete(server);
    UA_ServerConfig_delete(config);
    return retval == UA_STATUSCODE_GOOD ? EXIT_SUCCESS : EXIT_FAILURE;
}
Exemplo n.º 23
0
int main(int argc, char** argv) {
    signal(SIGINT, stopHandler); /* catches ctrl-c */

    UA_ServerConfig *config = UA_ServerConfig_new_default();

    /* load certificate */
    config->serverCertificate = loadFile("server_cert.der");
    if(config->serverCertificate.length > 0)
        UA_LOG_INFO(UA_Log_Stdout, UA_LOGCATEGORY_SERVER, "Certificate loaded");

    UA_Server *server = UA_Server_new(config);

    UA_StatusCode retval = UA_Server_run(server, &running);

    /* deallocate certificate's memory */
    UA_ByteString_clear(&config->serverCertificate);

    UA_Server_delete(server);
    UA_ServerConfig_delete(config);

    return retval == UA_STATUSCODE_GOOD ? EXIT_SUCCESS : EXIT_FAILURE;
}
Exemplo n.º 24
0
int main(int argc, char** argv) {
    signal(SIGINT, stopHandler); /* catches ctrl-c */

    UA_ServerConfig config = UA_ServerConfig_standard;
    UA_ServerNetworkLayer nl = UA_ServerNetworkLayerTCP(UA_ConnectionConfig_standard, 16664);
    config.networkLayers = &nl;
    config.networkLayersSize = 1;
    UA_Server *server = UA_Server_new(config);

    UA_StatusCode retval = UA_Server_run_startup(server);
    if(retval != UA_STATUSCODE_GOOD)
        goto cleanup;

    /* Should the server networklayer block (with a timeout) until a message
       arrives or should it return immediately? */
    UA_Boolean waitInternal = false;

    while(running) {
        /* timeout is the maximum possible delay (in millisec) until the next
           _iterate call. Otherwise, the server might miss an internal timeout
           or cannot react to messages with the promised responsiveness. */
        UA_UInt16 timeout = UA_Server_run_iterate(server, waitInternal);

        /* Now we can use the max timeout to do something else. In this case, we
           just sleep. (select is used as a platform-independent sleep
           function.) */
        struct timeval tv;
        tv.tv_sec = 0;
        tv.tv_usec = timeout * 1000;
        select(0, NULL, NULL, NULL, &tv);
    }
    retval = UA_Server_run_shutdown(server);

 cleanup:
    UA_Server_delete(server);
    nl.deleteMembers(&nl);
    return (int)retval;
}
Exemplo n.º 25
0
END_TEST

START_TEST(Service_Browse_WithBrowseName) {
    UA_ServerConfig *config = UA_ServerConfig_new_default();
    UA_Server *server = UA_Server_new(config);

    UA_BrowseDescription bd;
    UA_BrowseDescription_init(&bd);
    bd.resultMask = UA_BROWSERESULTMASK_BROWSENAME;
    bd.nodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER);
    bd.referenceTypeId = UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES);
    bd.browseDirection = UA_BROWSEDIRECTION_FORWARD;

    UA_BrowseResult br = UA_Server_browse(server, 0, &bd);

    ck_assert_int_eq(br.statusCode, UA_STATUSCODE_GOOD);
    ck_assert(br.referencesSize > 0);
    ck_assert(!UA_String_equal(&br.references[0].browseName.name, &UA_STRING_NULL));

    UA_BrowseResult_deleteMembers(&br);
    UA_Server_delete(server);
    UA_ServerConfig_delete(config);
}
Exemplo n.º 26
0
} END_TEST

START_TEST(AddNodeTwiceGivesError) {
    UA_Server *server = UA_Server_new(UA_ServerConfig_standard);

    /* add a variable node to the address space */
    UA_VariableAttributes attr;
    UA_VariableAttributes_init(&attr);
    UA_Int32 myInteger = 42;
    UA_Variant_setScalar(&attr.value, &myInteger, &UA_TYPES[UA_TYPES_INT32]);
    attr.description = UA_LOCALIZEDTEXT("en_US","the answer");
    attr.displayName = UA_LOCALIZEDTEXT("en_US","the answer");
    UA_NodeId myIntegerNodeId = UA_NODEID_STRING(1, "the.answer");
    UA_QualifiedName myIntegerName = UA_QUALIFIEDNAME(1, "the answer");
    UA_NodeId parentNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER);
    UA_NodeId parentReferenceNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES);
    UA_StatusCode res = UA_Server_addVariableNode(server, myIntegerNodeId, parentNodeId, parentReferenceNodeId,
                                                  myIntegerName, UA_NODEID_NULL, attr, NULL);
    ck_assert_int_eq(UA_STATUSCODE_GOOD, res);
    res = UA_Server_addVariableNode(server, myIntegerNodeId, parentNodeId, parentReferenceNodeId,
                                    myIntegerName, UA_NODEID_NULL, attr, NULL);
    ck_assert_int_eq(res, UA_STATUSCODE_BADNODEIDEXISTS);
    UA_Server_delete(server);
} END_TEST
Exemplo n.º 27
0
int main(void) {
    signal(SIGINT,  stopHandler);
    signal(SIGTERM, stopHandler);

    UA_ServerConfig config = UA_ServerConfig_standard;
    config.applicationDescription.applicationType = UA_APPLICATIONTYPE_DISCOVERYSERVER;
    config.applicationDescription.applicationUri = UA_String_fromChars("open62541.example.local_discovery_server");
    // timeout in seconds when to automatically remove a registered server from the list,
    // if it doesn't re-register within the given time frame. A value of 0 disables automatic removal.
    // Default is 60 Minutes (60*60). Must be bigger than 10 seconds, because cleanup is only triggered approximately
    // ervery 10 seconds.
    // The server will still be removed depending on the state of the semaphore file.
    // config.discoveryCleanupTimeout = 60*60;
    UA_ServerNetworkLayer nl = UA_ServerNetworkLayerTCP(UA_ConnectionConfig_standard, 4840);
    config.networkLayers = &nl;
    config.networkLayersSize = 1;
    UA_Server *server = UA_Server_new(config);

    UA_StatusCode retval = UA_Server_run(server, &running);
    UA_String_deleteMembers(&config.applicationDescription.applicationUri);
    UA_Server_delete(server);
    nl.deleteMembers(&nl);
    return (int)retval;
}
Exemplo n.º 28
0
int
main(int argc, char **argv) {
    signal(SIGINT, stopHandler); /* catches ctrl-c */
    signal(SIGTERM, stopHandler);

#ifdef UA_ENABLE_ENCRYPTION
    if(argc < 3) {
        UA_LOG_FATAL(UA_Log_Stdout, UA_LOGCATEGORY_USERLAND,
                     "Missing arguments for encryption support. "
                         "Arguments are <server-certificate.der> "
                         "<private-key.der> [<trustlist1.crl>, ...]");
        return 1;
    }

    /* Load certificate and private key */
    UA_ByteString certificate = loadFile(argv[1]);
    UA_ByteString privateKey = loadFile(argv[2]);

    /* Load the trustlist */
    size_t trustListSize = 0;
    if(argc > 3)
        trustListSize = (size_t)argc-3;
    UA_STACKARRAY(UA_ByteString, trustList, trustListSize);
    for(size_t i = 0; i < trustListSize; i++)
        trustList[i] = loadFile(argv[i+3]);

    /* Loading of a revocation list currently unsupported */
    UA_ByteString *revocationList = NULL;
    size_t revocationListSize = 0;

    UA_ServerConfig *config =
        UA_ServerConfig_new_allSecurityPolicies(4840, &certificate, &privateKey,
                                                trustList, trustListSize,
                                                revocationList, revocationListSize);
    UA_ByteString_deleteMembers(&certificate);
    UA_ByteString_deleteMembers(&privateKey);
    for(size_t i = 0; i < trustListSize; i++)
        UA_ByteString_deleteMembers(&trustList[i]);

    if(!config) {
        UA_LOG_FATAL(UA_Log_Stdout, UA_LOGCATEGORY_USERLAND,
                     "Could not create the server config");
        return 1;
    }
#else
    if(argc < 2) {
        UA_LOG_FATAL(UA_Log_Stdout, UA_LOGCATEGORY_USERLAND,
                     "Missing argument for the server certificate");
        return 1;
    }
    UA_ByteString certificate = loadFile(argv[1]);
    UA_ServerConfig *config = UA_ServerConfig_new_minimal(4840, &certificate);
    UA_ByteString_deleteMembers(&certificate);
#endif

    /* uncomment next line to add a custom hostname */
    // UA_ServerConfig_set_customHostname(config, UA_STRING("custom"));

    UA_Server *server = UA_Server_new(config);
    if(server == NULL)
        return 1;

    /* add a static variable node to the server */
    UA_VariableAttributes myVar = UA_VariableAttributes_default;
    myVar.description = UA_LOCALIZEDTEXT("en-US", "the answer");
    myVar.displayName = UA_LOCALIZEDTEXT("en-US", "the answer");
    myVar.accessLevel = UA_ACCESSLEVELMASK_READ | UA_ACCESSLEVELMASK_WRITE;
    myVar.dataType = UA_TYPES[UA_TYPES_INT32].typeId;
    myVar.valueRank = -1;
    UA_Int32 myInteger = 42;
    UA_Variant_setScalarCopy(&myVar.value, &myInteger, &UA_TYPES[UA_TYPES_INT32]);
    const UA_QualifiedName myIntegerName = UA_QUALIFIEDNAME(1, "the answer");
    const UA_NodeId myIntegerNodeId = UA_NODEID_STRING(1, "the.answer");
    UA_NodeId parentNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER);
    UA_NodeId parentReferenceNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES);
    UA_Server_addVariableNode(server, myIntegerNodeId, parentNodeId, parentReferenceNodeId,
                              myIntegerName, baseDataVariableType, myVar, NULL, NULL);
    UA_Variant_deleteMembers(&myVar.value);

    /* add a static variable that is readable but not writable*/
    myVar = UA_VariableAttributes_default;
    myVar.description = UA_LOCALIZEDTEXT("en-US", "the answer - not readable");
    myVar.displayName = UA_LOCALIZEDTEXT("en-US", "the answer - not readable");
    myVar.accessLevel = UA_ACCESSLEVELMASK_WRITE;
    myVar.dataType = UA_TYPES[UA_TYPES_INT32].typeId;
    myVar.valueRank = -1;
    UA_Variant_setScalarCopy(&myVar.value, &myInteger, &UA_TYPES[UA_TYPES_INT32]);
    const UA_QualifiedName myInteger2Name = UA_QUALIFIEDNAME(1, "the answer - not readable");
    const UA_NodeId myInteger2NodeId = UA_NODEID_STRING(1, "the.answer.no.read");
    UA_Server_addVariableNode(server, myInteger2NodeId, parentNodeId, parentReferenceNodeId,
                              myInteger2Name, baseDataVariableType, myVar, NULL, NULL);
    UA_Variant_deleteMembers(&myVar.value);

    /* add a variable with the datetime data source */
    UA_DataSource dateDataSource;
    dateDataSource.read = readTimeData;
    dateDataSource.write = NULL;
    UA_VariableAttributes v_attr = UA_VariableAttributes_default;
    v_attr.description = UA_LOCALIZEDTEXT("en-US", "current time");
    v_attr.displayName = UA_LOCALIZEDTEXT("en-US", "current time");
    v_attr.accessLevel = UA_ACCESSLEVELMASK_READ;
    v_attr.dataType = UA_TYPES[UA_TYPES_DATETIME].typeId;
    v_attr.valueRank = -1;
    const UA_QualifiedName dateName = UA_QUALIFIEDNAME(1, "current time");
    UA_Server_addDataSourceVariableNode(server, UA_NODEID_NULL, UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER),
                                        UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES), dateName,
                                        baseDataVariableType, v_attr, dateDataSource, NULL, NULL);

    /* Add HelloWorld method to the server */
#ifdef UA_ENABLE_METHODCALLS
    /* Method with IO Arguments */
    UA_Argument inputArguments;
    UA_Argument_init(&inputArguments);
    inputArguments.dataType = UA_TYPES[UA_TYPES_STRING].typeId;
    inputArguments.description = UA_LOCALIZEDTEXT("en-US", "Say your name");
    inputArguments.name = UA_STRING("Name");
    inputArguments.valueRank = -1; /* scalar argument */

    UA_Argument outputArguments;
    UA_Argument_init(&outputArguments);
    outputArguments.arrayDimensionsSize = 0;
    outputArguments.arrayDimensions = NULL;
    outputArguments.dataType = UA_TYPES[UA_TYPES_STRING].typeId;
    outputArguments.description = UA_LOCALIZEDTEXT("en-US", "Receive a greeting");
    outputArguments.name = UA_STRING("greeting");
    outputArguments.valueRank = -1;

    UA_MethodAttributes addmethodattributes = UA_MethodAttributes_default;
    addmethodattributes.displayName = UA_LOCALIZEDTEXT("en-US", "Hello World");
    addmethodattributes.executable = true;
    addmethodattributes.userExecutable = true;
    UA_Server_addMethodNode(server, UA_NODEID_NUMERIC(1, 62541),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_HASCOMPONENT),
                            UA_QUALIFIEDNAME(1, "hello_world"), addmethodattributes,
                            &helloWorld, /* callback of the method node */
                            1, &inputArguments, 1, &outputArguments, NULL, NULL);
#endif

    /* Add folders for demo information model */
#define DEMOID 50000
#define SCALARID 50001
#define ARRAYID 50002
#define MATRIXID 50003
#define DEPTHID 50004

    UA_ObjectAttributes object_attr = UA_ObjectAttributes_default;
    object_attr.description = UA_LOCALIZEDTEXT("en-US", "Demo");
    object_attr.displayName = UA_LOCALIZEDTEXT("en-US", "Demo");
    UA_Server_addObjectNode(server, UA_NODEID_NUMERIC(1, DEMOID),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES), UA_QUALIFIEDNAME(1, "Demo"),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_FOLDERTYPE), object_attr, NULL, NULL);

    object_attr.description = UA_LOCALIZEDTEXT("en-US", "Scalar");
    object_attr.displayName = UA_LOCALIZEDTEXT("en-US", "Scalar");
    UA_Server_addObjectNode(server, UA_NODEID_NUMERIC(1, SCALARID),
                            UA_NODEID_NUMERIC(1, DEMOID), UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES),
                            UA_QUALIFIEDNAME(1, "Scalar"),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_FOLDERTYPE), object_attr, NULL, NULL);

    object_attr.description = UA_LOCALIZEDTEXT("en-US", "Array");
    object_attr.displayName = UA_LOCALIZEDTEXT("en-US", "Array");
    UA_Server_addObjectNode(server, UA_NODEID_NUMERIC(1, ARRAYID),
                            UA_NODEID_NUMERIC(1, DEMOID), UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES),
                            UA_QUALIFIEDNAME(1, "Array"),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_FOLDERTYPE), object_attr, NULL, NULL);

    object_attr.description = UA_LOCALIZEDTEXT("en-US", "Matrix");
    object_attr.displayName = UA_LOCALIZEDTEXT("en-US", "Matrix");
    UA_Server_addObjectNode(server, UA_NODEID_NUMERIC(1, MATRIXID), UA_NODEID_NUMERIC(1, DEMOID),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES), UA_QUALIFIEDNAME(1, "Matrix"),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_FOLDERTYPE), object_attr, NULL, NULL);

    /* Fill demo nodes for each type*/
    UA_UInt32 id = 51000; // running id in namespace 0
    for(UA_UInt32 type = 0; type < UA_TYPES_DIAGNOSTICINFO; type++) {
        if(type == UA_TYPES_VARIANT || type == UA_TYPES_DIAGNOSTICINFO)
            continue;

        UA_VariableAttributes attr = UA_VariableAttributes_default;
        attr.valueRank = -2;
        attr.dataType = UA_TYPES[type].typeId;
#ifndef UA_ENABLE_TYPENAMES
        char name[15];
#if defined(_WIN32) && !defined(__MINGW32__)
        sprintf_s(name, 15, "%02d", type);
#else
        sprintf(name, "%02d", type);
#endif
        attr.displayName = UA_LOCALIZEDTEXT("en-US", name);
        UA_QualifiedName qualifiedName = UA_QUALIFIEDNAME(1, name);
#else
        attr.displayName = UA_LOCALIZEDTEXT_ALLOC("en-US", UA_TYPES[type].typeName);
        UA_QualifiedName qualifiedName = UA_QUALIFIEDNAME_ALLOC(1, UA_TYPES[type].typeName);
#endif
        attr.accessLevel = UA_ACCESSLEVELMASK_READ | UA_ACCESSLEVELMASK_WRITE;
        attr.writeMask = UA_WRITEMASK_DISPLAYNAME | UA_WRITEMASK_DESCRIPTION;
        attr.userWriteMask = UA_WRITEMASK_DISPLAYNAME | UA_WRITEMASK_DESCRIPTION;

        /* add a scalar node for every built-in type */
        void *value = UA_new(&UA_TYPES[type]);
        UA_Variant_setScalar(&attr.value, value, &UA_TYPES[type]);
        UA_Server_addVariableNode(server, UA_NODEID_NUMERIC(1, ++id),
                                  UA_NODEID_NUMERIC(1, SCALARID), UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES),
                                  qualifiedName, baseDataVariableType, attr, NULL, NULL);
        UA_Variant_deleteMembers(&attr.value);

        /* add an array node for every built-in type */
        UA_Variant_setArray(&attr.value, UA_Array_new(10, &UA_TYPES[type]), 10, &UA_TYPES[type]);
        UA_Server_addVariableNode(server, UA_NODEID_NUMERIC(1, ++id), UA_NODEID_NUMERIC(1, ARRAYID),
                                  UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES), qualifiedName,
                                  baseDataVariableType, attr, NULL, NULL);
        UA_Variant_deleteMembers(&attr.value);

        /* add an matrix node for every built-in type */
        void *myMultiArray = UA_Array_new(9, &UA_TYPES[type]);
        attr.value.arrayDimensions = (UA_UInt32 *)UA_Array_new(2, &UA_TYPES[UA_TYPES_INT32]);
        attr.value.arrayDimensions[0] = 3;
        attr.value.arrayDimensions[1] = 3;
        attr.value.arrayDimensionsSize = 2;
        attr.value.arrayLength = 9;
        attr.value.data = myMultiArray;
        attr.value.type = &UA_TYPES[type];
        UA_Server_addVariableNode(server, UA_NODEID_NUMERIC(1, ++id), UA_NODEID_NUMERIC(1, MATRIXID),
                                  UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES), qualifiedName,
                                  baseDataVariableType, attr, NULL, NULL);
        UA_Variant_deleteMembers(&attr.value);
#ifdef UA_ENABLE_TYPENAMES
        UA_LocalizedText_deleteMembers(&attr.displayName);
        UA_QualifiedName_deleteMembers(&qualifiedName);
#endif
    }

    /* Hierarchy of depth 10 for CTT testing with forward and inverse references */
    /* Enter node "depth 9" in CTT configuration - Project->Settings->Server
       Test->NodeIds->Paths->Starting Node 1 */
    object_attr.description = UA_LOCALIZEDTEXT("en-US", "DepthDemo");
    object_attr.displayName = UA_LOCALIZEDTEXT("en-US", "DepthDemo");
    UA_Server_addObjectNode(server, UA_NODEID_NUMERIC(1, DEPTHID), UA_NODEID_NUMERIC(1, DEMOID),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES), UA_QUALIFIEDNAME(1, "DepthDemo"),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_FOLDERTYPE), object_attr, NULL, NULL);

    id = DEPTHID; // running id in namespace 0 - Start with Matrix NODE
    for(UA_UInt32 i = 1; i <= 20; i++) {
        char name[15];
#if defined(_WIN32) && !defined(__MINGW32__)
        sprintf_s(name, 15, "depth%i", i);
#else
        sprintf(name, "depth%i", i);
#endif
        object_attr.description = UA_LOCALIZEDTEXT("en-US", name);
        object_attr.displayName = UA_LOCALIZEDTEXT("en-US", name);
        UA_Server_addObjectNode(server, UA_NODEID_NUMERIC(1, id + i),
                                UA_NODEID_NUMERIC(1, i == 1 ? DEPTHID : id + i - 1),
                                UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES),
                                UA_QUALIFIEDNAME(1, name),
                                UA_NODEID_NUMERIC(0, UA_NS0ID_FOLDERTYPE), object_attr, NULL, NULL);
    }

    /* Add the variable to some more places to get a node with three inverse references for the CTT */
    UA_ExpandedNodeId answer_nodeid = UA_EXPANDEDNODEID_STRING(1, "the.answer");
    UA_Server_addReference(server, UA_NODEID_NUMERIC(1, DEMOID),
                           UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES), answer_nodeid, true);
    UA_Server_addReference(server, UA_NODEID_NUMERIC(1, SCALARID),
                           UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES), answer_nodeid, true);

    /* Example for manually setting an attribute within the server */
    UA_LocalizedText objectsName = UA_LOCALIZEDTEXT("en-US", "Objects");
    UA_Server_writeDisplayName(server, UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER), objectsName);

#define NOARGID     60000
#define INARGID     60001
#define OUTARGID    60002
#define INOUTARGID  60003
#ifdef UA_ENABLE_METHODCALLS
    /* adding some more method nodes to pass CTT */
    /* Method without arguments */
    addmethodattributes = UA_MethodAttributes_default;
    addmethodattributes.displayName = UA_LOCALIZEDTEXT("en-US", "noarg");
    addmethodattributes.executable = true;
    addmethodattributes.userExecutable = true;
    UA_Server_addMethodNode(server, UA_NODEID_NUMERIC(1, NOARGID),
                            UA_NODEID_NUMERIC(1, DEMOID),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_HASCOMPONENT),
                            UA_QUALIFIEDNAME(1, "noarg"), addmethodattributes,
                            &noargMethod, /* callback of the method node */
                            0, NULL, 0, NULL, NULL, NULL);

    /* Method with in arguments */
    addmethodattributes = UA_MethodAttributes_default;
    addmethodattributes.displayName = UA_LOCALIZEDTEXT("en-US", "inarg");
    addmethodattributes.executable = true;
    addmethodattributes.userExecutable = true;

    UA_Argument_init(&inputArguments);
    inputArguments.dataType = UA_TYPES[UA_TYPES_INT32].typeId;
    inputArguments.description = UA_LOCALIZEDTEXT("en-US", "Input");
    inputArguments.name = UA_STRING("Input");
    inputArguments.valueRank = -1; //uaexpert will crash if set to 0 ;)

    UA_Server_addMethodNode(server, UA_NODEID_NUMERIC(1, INARGID),
                            UA_NODEID_NUMERIC(1, DEMOID),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_HASCOMPONENT),
                            UA_QUALIFIEDNAME(1, "noarg"), addmethodattributes,
                            &noargMethod, /* callback of the method node */
                            1, &inputArguments, 0, NULL, NULL, NULL);

    /* Method with out arguments */
    addmethodattributes = UA_MethodAttributes_default;
    addmethodattributes.displayName = UA_LOCALIZEDTEXT("en-US", "outarg");
    addmethodattributes.executable = true;
    addmethodattributes.userExecutable = true;

    UA_Argument_init(&outputArguments);
    outputArguments.dataType = UA_TYPES[UA_TYPES_INT32].typeId;
    outputArguments.description = UA_LOCALIZEDTEXT("en-US", "Output");
    outputArguments.name = UA_STRING("Output");
    outputArguments.valueRank = -1;

    UA_Server_addMethodNode(server, UA_NODEID_NUMERIC(1, OUTARGID),
                            UA_NODEID_NUMERIC(1, DEMOID),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_HASCOMPONENT),
                            UA_QUALIFIEDNAME(1, "outarg"), addmethodattributes,
                            &outargMethod, /* callback of the method node */
                            0, NULL, 1, &outputArguments, NULL, NULL);

    /* Method with inout arguments */
    addmethodattributes = UA_MethodAttributes_default;
    addmethodattributes.displayName = UA_LOCALIZEDTEXT("en-US", "inoutarg");
    addmethodattributes.executable = true;
    addmethodattributes.userExecutable = true;

    UA_Server_addMethodNode(server, UA_NODEID_NUMERIC(1, INOUTARGID),
                            UA_NODEID_NUMERIC(1, DEMOID),
                            UA_NODEID_NUMERIC(0, UA_NS0ID_HASCOMPONENT),
                            UA_QUALIFIEDNAME(1, "inoutarg"), addmethodattributes,
                            &outargMethod, /* callback of the method node */
                            1, &inputArguments, 1, &outputArguments, NULL, NULL);
#endif

    /* run server */
    UA_StatusCode retval = UA_Server_run(server, &running);
    UA_Server_delete(server);
    UA_ServerConfig_delete(config);
    return (int)retval;
}
Exemplo n.º 29
0
int main(int argc, char** argv) {
    signal(SIGINT, stopHandler); /* catches ctrl-c */

    UA_ServerConfig config = UA_ServerConfig_standard;
    UA_ServerNetworkLayer nl = UA_ServerNetworkLayerTCP(UA_ConnectionConfig_standard, 16664, logger);
    config.logger = Logger_Stdout;
    config.networkLayers = &nl;
    config.networkLayersSize = 1;
    UA_Server *server = UA_Server_new(config);

    /* add a variable node to the address space */
    UA_VariableAttributes attr;
    UA_VariableAttributes_init(&attr);
    UA_Int32 myInteger = 42;
    UA_Variant_setScalar(&attr.value, &myInteger, &UA_TYPES[UA_TYPES_INT32]);
    attr.description = UA_LOCALIZEDTEXT("en_US","the answer");
    attr.displayName = UA_LOCALIZEDTEXT("en_US","the answer");
    UA_NodeId myIntegerNodeId = UA_NODEID_STRING(1, "the.answer");
    UA_QualifiedName myIntegerName = UA_QUALIFIEDNAME(1, "the answer");
    UA_NodeId parentNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER);
    UA_NodeId parentReferenceNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES);
    UA_Server_addVariableNode(server, myIntegerNodeId, parentNodeId,
                              parentReferenceNodeId, myIntegerName,
                              UA_NODEID_NULL, attr, NULL, NULL);

    UA_ReadRequest request;
    UA_ReadRequest_init(&request);
    UA_ReadValueId rvi;
    rvi.nodeId = myIntegerNodeId;
    rvi.attributeId = UA_ATTRIBUTEID_VALUE;
    rvi.indexRange = UA_STRING_NULL;
    rvi.dataEncoding = UA_QUALIFIEDNAME(0, "DefaultBinary");
    request.timestampsToReturn = UA_TIMESTAMPSTORETURN_NEITHER;
    request.nodesToReadSize = 1;
    request.nodesToRead = &rvi;

    UA_StatusCode retval = UA_STATUSCODE_GOOD;
    UA_ByteString request_msg;
    retval |= UA_ByteString_allocBuffer(&request_msg, 1000);
    UA_ByteString response_msg;
    retval |= UA_ByteString_allocBuffer(&response_msg, 1000);
    size_t offset = 0;
    retval |= UA_encodeBinary(&request, &UA_TYPES[UA_TYPES_READREQUEST], &request_msg, &offset);
    
    clock_t begin, end;
    begin = clock();

    UA_ReadRequest rq;
    UA_ReadResponse rr;

    for(int i = 0; i < 900000; i++) {
        offset = 0;
        retval |= UA_decodeBinary(&request_msg, &offset, &rq, &UA_TYPES[UA_TYPES_READREQUEST]);

        UA_ReadResponse_init(&rr);
        Service_Read(server, &adminSession, &rq, &rr);

        offset = 0;
        retval |= UA_encodeBinary(&rr, &UA_TYPES[UA_TYPES_READRESPONSE], &response_msg, &offset);

        UA_ReadRequest_deleteMembers(&rq);
        UA_ReadResponse_deleteMembers(&rr);
    }

    end = clock();
    double time_spent = (double)(end - begin) / CLOCKS_PER_SEC;
    printf("duration was %f s\n", time_spent);
    printf("retval is %i\n", retval);

    UA_ByteString_deleteMembers(&request_msg);
    UA_ByteString_deleteMembers(&response_msg);

    retval |= UA_Server_run(server, &running);
    UA_Server_delete(server);
    nl.deleteMembers(&nl);

    return (int)retval;
}
static void setup(void) {
    if (!(MUTEX_INIT(serverMutex))) {
        fprintf(stderr, "Server mutex was not created correctly.\n");
        exit(1);
    }
    running = true;

    server = UA_Server_new();
    UA_ServerConfig *config = UA_Server_getConfig(server);
    UA_ServerConfig_setDefault(config);

#ifdef UA_ENABLE_HISTORIZING
    gathering = (UA_HistoryDataGathering*)UA_calloc(1, sizeof(UA_HistoryDataGathering));
    *gathering = UA_HistoryDataGathering_Default(1);
    config->historyDatabase = UA_HistoryDatabase_default(*gathering);
#endif

    UA_StatusCode retval = UA_Server_run_startup(server);
    if(retval != UA_STATUSCODE_GOOD) {
        fprintf(stderr, "Error while calling Server_run_startup. %s\n", UA_StatusCode_name(retval));
        UA_Server_delete(server);
        exit(1);
    }

    THREAD_CREATE(server_thread, serverloop);
    /* Define the attribute of the uint32 variable node */
    UA_VariableAttributes attr = UA_VariableAttributes_default;
    UA_UInt32 myUint32 = 40;
    UA_Variant_setScalar(&attr.value, &myUint32, &UA_TYPES[UA_TYPES_UINT32]);
    attr.description = UA_LOCALIZEDTEXT("en-US","the answer");
    attr.displayName = UA_LOCALIZEDTEXT("en-US","the answer");
    attr.dataType = UA_TYPES[UA_TYPES_UINT32].typeId;
    attr.accessLevel = UA_ACCESSLEVELMASK_READ | UA_ACCESSLEVELMASK_WRITE | UA_ACCESSLEVELMASK_HISTORYREAD | UA_ACCESSLEVELMASK_HISTORYWRITE;
    attr.historizing = true;

    /* Add the variable node to the information model */
    UA_NodeId uint32NodeId = UA_NODEID_STRING(1, "the.answer");
    UA_QualifiedName uint32Name = UA_QUALIFIEDNAME(1, "the answer");
    parentNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_OBJECTSFOLDER);
    parentReferenceNodeId = UA_NODEID_NUMERIC(0, UA_NS0ID_ORGANIZES);
    UA_NodeId_init(&outNodeId);
    retval = UA_Server_addVariableNode(server, uint32NodeId, parentNodeId,
                                       parentReferenceNodeId, uint32Name,
                                       UA_NODEID_NUMERIC(0, UA_NS0ID_BASEDATAVARIABLETYPE),
                                       attr, NULL, &outNodeId);
    if (retval != UA_STATUSCODE_GOOD) {
        fprintf(stderr, "Error adding variable node. %s\n", UA_StatusCode_name(retval));
        UA_Server_delete(server);
        exit(1);
    }

    client = UA_Client_new();
    UA_ClientConfig_setDefault(UA_Client_getConfig(client));
    retval = UA_Client_connect(client, "opc.tcp://localhost:4840");
    if (retval != UA_STATUSCODE_GOOD) {
        fprintf(stderr, "Client can not connect to opc.tcp://localhost:4840. %s\n", UA_StatusCode_name(retval));
        UA_Client_delete(client);
        UA_Server_delete(server);
        exit(1);
    }

    UA_Client_recv = client->connection.recv;
    client->connection.recv = UA_Client_recvTesting;
}