static SYSCTL_NODE(_hw_usb, OID_AUTO, umodem, CTLFLAG_RW, 0, "USB umodem");
SYSCTL_INT(_hw_usb_umodem, OID_AUTO, debug, CTLFLAG_RW,
&umodem_debug, 0, "Debug level");
#endif
static const STRUCT_USB_HOST_ID umodem_devs[] = {
/* Generic Modem class match */
{USB_IFACE_CLASS(UICLASS_CDC),
USB_IFACE_SUBCLASS(UISUBCLASS_ABSTRACT_CONTROL_MODEL),
USB_IFACE_PROTOCOL(UIPROTO_CDC_AT)},
/* Huawei Modem class match */
{USB_IFACE_CLASS(UICLASS_CDC),
USB_IFACE_SUBCLASS(UISUBCLASS_ABSTRACT_CONTROL_MODEL),
USB_IFACE_PROTOCOL(0xFF)},
/* Kyocera AH-K3001V */
{USB_VPI(USB_VENDOR_KYOCERA, USB_PRODUCT_KYOCERA_AHK3001V, 1)},
{USB_VPI(USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC5720, 1)},
{USB_VPI(USB_VENDOR_CURITEL, USB_PRODUCT_CURITEL_PC5740, 1)},
};
/*
* As speeds for umodem deivces increase, these numbers will need to
* be increased. They should be good for G3 speeds and below.
*
* TODO: The TTY buffers should be increased!
*/
#define UMODEM_BUF_SIZE 1024
enum {
UMODEM_BULK_WR,
UMODEM_BULK_RD,
};
/*
* If for some reason device should not be attached then put
* VendorID/ProductID pair into the list below. The format is
* as follows:
*
* { USB_VPI(VENDOR_ID, PRODUCT_ID, 0) },
*
* where VENDOR_ID and PRODUCT_ID are hex numbers.
*/
static const STRUCT_USB_HOST_ID ubt_ignore_devs[] =
{
/* AVM USB Bluetooth-Adapter BlueFritz! v1.0 */
{ USB_VPI(USB_VENDOR_AVM, 0x2200, 0) },
/* Atheros 3011 with sflash firmware */
{ USB_VPI(0x0cf3, 0x3002, 0) },
{ USB_VPI(0x0cf3, 0xe019, 0) },
{ USB_VPI(0x13d3, 0x3304, 0) },
{ USB_VPI(0x0930, 0x0215, 0) },
{ USB_VPI(0x0489, 0xe03d, 0) },
{ USB_VPI(0x0489, 0xe027, 0) },
/* Atheros AR9285 Malbec with sflash firmware */
{ USB_VPI(0x03f0, 0x311d, 0) },
/* Atheros 3012 with sflash firmware */
{ USB_VPI(0x0cf3, 0x3004, 0), USB_DEV_BCD_LTEQ(1) },
{ USB_VPI(0x0cf3, 0x311d, 0), USB_DEV_BCD_LTEQ(1) },
MODULE_VERSION(cdce, 1);
MODULE_DEPEND(cdce, uether, 1, 1, 1);
MODULE_DEPEND(cdce, usb, 1, 1, 1);
MODULE_DEPEND(cdce, ether, 1, 1, 1);
static const struct usb_ether_methods cdce_ue_methods = {
.ue_attach_post = cdce_attach_post,
.ue_start = cdce_start,
.ue_init = cdce_init,
.ue_stop = cdce_stop,
.ue_setmulti = cdce_setmulti,
.ue_setpromisc = cdce_setpromisc,
};
static const STRUCT_USB_HOST_ID cdce_host_devs[] = {
{USB_VPI(USB_VENDOR_ACERLABS, USB_PRODUCT_ACERLABS_M5632, CDCE_FLAG_NO_UNION)},
{USB_VPI(USB_VENDOR_AMBIT, USB_PRODUCT_AMBIT_NTL_250, CDCE_FLAG_NO_UNION)},
{USB_VPI(USB_VENDOR_COMPAQ, USB_PRODUCT_COMPAQ_IPAQLINUX, CDCE_FLAG_NO_UNION)},
{USB_VPI(USB_VENDOR_GMATE, USB_PRODUCT_GMATE_YP3X00, CDCE_FLAG_NO_UNION)},
{USB_VPI(USB_VENDOR_MOTOROLA2, USB_PRODUCT_MOTOROLA2_USBLAN, CDCE_FLAG_ZAURUS | CDCE_FLAG_NO_UNION)},
{USB_VPI(USB_VENDOR_MOTOROLA2, USB_PRODUCT_MOTOROLA2_USBLAN2, CDCE_FLAG_ZAURUS | CDCE_FLAG_NO_UNION)},
{USB_VPI(USB_VENDOR_NETCHIP, USB_PRODUCT_NETCHIP_ETHERNETGADGET, CDCE_FLAG_NO_UNION)},
{USB_VPI(USB_VENDOR_PROLIFIC, USB_PRODUCT_PROLIFIC_PL2501, CDCE_FLAG_NO_UNION)},
{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_SL5500, CDCE_FLAG_ZAURUS)},
{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_SL5600, CDCE_FLAG_ZAURUS | CDCE_FLAG_NO_UNION)},
{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_SLA300, CDCE_FLAG_ZAURUS | CDCE_FLAG_NO_UNION)},
{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_SLC700, CDCE_FLAG_ZAURUS | CDCE_FLAG_NO_UNION)},
{USB_VPI(USB_VENDOR_SHARP, USB_PRODUCT_SHARP_SLC750, CDCE_FLAG_ZAURUS | CDCE_FLAG_NO_UNION)},
};
static const STRUCT_USB_DUAL_ID cdce_dual_devs[] = {
};
/*
* If for some reason device should not be attached then put
* VendorID/ProductID pair into the list below. The format is
* as follows:
*
* { USB_VPI(VENDOR_ID, PRODUCT_ID, 0) },
*
* where VENDOR_ID and PRODUCT_ID are hex numbers.
*/
static const struct usb_device_id ubt_ignore_devs[] =
{
/* AVM USB Bluetooth-Adapter BlueFritz! v1.0 */
{ USB_VPI(USB_VENDOR_AVM, 0x2200, 0) },
};
/* List of supported bluetooth devices */
static const struct usb_device_id ubt_devs[] =
{
/* Generic Bluetooth class devices */
{ USB_IFACE_CLASS(UDCLASS_WIRELESS),
USB_IFACE_SUBCLASS(UDSUBCLASS_RF),
USB_IFACE_PROTOCOL(UDPROTO_BLUETOOTH) },
/* AVM USB Bluetooth-Adapter BlueFritz! v2.0 */
{ USB_VPI(USB_VENDOR_AVM, 0x3800, 0) },
};
/*
