signed long GetStreamWriteAvailable( PaStream* stream )
{
PaMacBlio *blio = & ((PaMacCoreStream*)stream) -> blio;
VVDBUG(("GetStreamWriteAvailable()\n"));
return PaUtil_GetRingBufferWriteAvailable( &blio->outputRingBuffer );
}
signed long GetStreamReadAvailable( PaStream* stream )
{
PaMacBlio *blio = & ((PaMacCoreStream*)stream) -> blio;
VVDBUG(("GetStreamReadAvailable()\n"));
return PaUtil_GetRingBufferReadAvailable( &blio->inputRingBuffer )
/ ( blio->inputSampleSizeActual * blio->inChan );
}
signed long GetStreamWriteAvailable( PaStream* stream )
{
PaMacBlio *blio = & ((PaMacCoreStream*)stream) -> blio;
VVDBUG(("GetStreamWriteAvailable()\n"));
return RingBuffer_GetWriteAvailable( &blio->outputRingBuffer )
/ ( blio->outputSampleSize * blio->outChan );
}
PaError WriteStream( PaStream* stream,
const void *buffer,
unsigned long frames )
{
PaMacBlio *blio = & ((PaMacCoreStream*)stream) -> blio;
char *cbuf = (char *) buffer;
PaError ret = paNoError;
VVDBUG(("WriteStream()\n"));
while( frames > 0 ) {
long avail = 0;
long toWrite;
do {
avail = PaUtil_GetRingBufferWriteAvailable( &blio->outputRingBuffer );
/*
printf( "Write Buffer is %%%g full: %ld of %ld.\n",
100 - 100 * (float)avail / (float) blio->outputRingBuffer.bufferSize,
avail, blio->outputRingBuffer.bufferSize );
*/
if( avail == 0 ) {
#ifdef PA_MAC_BLIO_MUTEX
/*block while full*/
ret = UNIX_ERR( pthread_mutex_lock( &blio->outputMutex ) );
if( ret )
return ret;
while( blio->isOutputFull ) {
ret = UNIX_ERR( pthread_cond_wait( &blio->outputCond, &blio->outputMutex ) );
if( ret )
return ret;
}
ret = UNIX_ERR( pthread_mutex_unlock( &blio->outputMutex ) );
if( ret )
return ret;
#else
Pa_Sleep( PA_MAC_BLIO_BUSY_WAIT_SLEEP_INTERVAL );
#endif
}
} while( avail == 0 );
toWrite = MIN( avail, frames * blio->outputSampleSizeActual * blio->outChan );
toWrite -= toWrite % blio->outputSampleSizeActual * blio->outChan ;
PaUtil_WriteRingBuffer( &blio->outputRingBuffer, (void *)cbuf, toWrite );
cbuf += toWrite;
frames -= toWrite / ( blio->outputSampleSizeActual * blio->outChan );
#ifdef PA_MAC_BLIO_MUTEX
if( toWrite == avail ) {
/* we just filled up the buffer, so we need to mark it as filled. */
ret = blioSetIsOutputFull( blio, true );
if( ret )
return ret;
/* of course, in the meantime, we may have emptied the buffer, so
so check for that, too, to avoid a race condition. */
if( PaUtil_GetRingBufferWriteAvailable( &blio->outputRingBuffer ) ) {
blioSetIsOutputFull( blio, false );
if( ret )
return ret;
}
}
#endif
}
/* Report either paNoError or paOutputUnderflowed. */
/* may also want to report other errors, but this is non-standard. */
ret = blio->statusFlags & paOutputUnderflow;
/* report underflow only once: */
if( ret ) {
OSAtomicAnd32( (uint32_t)(~paOutputUnderflow), &blio->statusFlags );
ret = paOutputUnderflowed;
}
return ret;
}
PaError ReadStream( PaStream* stream,
void *buffer,
unsigned long frames )
{
PaMacBlio *blio = & ((PaMacCoreStream*)stream) -> blio;
char *cbuf = (char *) buffer;
PaError ret = paNoError;
VVDBUG(("ReadStream()\n"));
while( frames > 0 ) {
long avail;
long toRead;
do {
avail = PaUtil_GetRingBufferReadAvailable( &blio->inputRingBuffer );
/*
printf( "Read Buffer is %%%g full: %ld of %ld.\n",
100 * (float)avail / (float) blio->inputRingBuffer.bufferSize,
avail, blio->inputRingBuffer.bufferSize );
*/
if( avail == 0 ) {
#ifdef PA_MAC_BLIO_MUTEX
/**block when empty*/
ret = UNIX_ERR( pthread_mutex_lock( &blio->inputMutex ) );
if( ret )
return ret;
while( blio->isInputEmpty ) {
ret = UNIX_ERR( pthread_cond_wait( &blio->inputCond, &blio->inputMutex ) );
if( ret )
return ret;
}
ret = UNIX_ERR( pthread_mutex_unlock( &blio->inputMutex ) );
if( ret )
return ret;
#else
Pa_Sleep( PA_MAC_BLIO_BUSY_WAIT_SLEEP_INTERVAL );
#endif
}
} while( avail == 0 );
toRead = MIN( avail, frames * blio->inputSampleSizeActual * blio->inChan );
toRead -= toRead % blio->inputSampleSizeActual * blio->inChan ;
PaUtil_ReadRingBuffer( &blio->inputRingBuffer, (void *)cbuf, toRead );
cbuf += toRead;
frames -= toRead / ( blio->inputSampleSizeActual * blio->inChan );
if( toRead == avail ) {
#ifdef PA_MAC_BLIO_MUTEX
/* we just emptied the buffer, so we need to mark it as empty. */
ret = blioSetIsInputEmpty( blio, true );
if( ret )
return ret;
/* of course, in the meantime, the callback may have put some sats
in, so
so check for that, too, to avoid a race condition. */
if( PaUtil_GetRingBufferReadAvailable( &blio->inputRingBuffer ) ) {
blioSetIsInputEmpty( blio, false );
if( ret )
return ret;
}
#endif
}
}
/* Report either paNoError or paInputOverflowed. */
/* may also want to report other errors, but this is non-standard. */
ret = blio->statusFlags & paInputOverflow;
/* report underflow only once: */
if( ret ) {
OSAtomicAnd32( (uint32_t)(~paInputOverflow), &blio->statusFlags );
ret = paInputOverflowed;
}
return ret;
}
PaError WriteStream( PaStream* stream,
const void *buffer,
unsigned long framesRequested )
{
PaMacCoreStream *macStream = (PaMacCoreStream*)stream;
PaMacBlio *blio = &macStream->blio;
char *cbuf = (char *) buffer;
PaError ret = paNoError;
VVDBUG(("WriteStream()\n"));
while( framesRequested > 0 && macStream->state != STOPPING ) {
ring_buffer_size_t framesAvailable;
ring_buffer_size_t framesToTransfer;
ring_buffer_size_t framesTransferred;
do {
framesAvailable = PaUtil_GetRingBufferWriteAvailable( &blio->outputRingBuffer );
/*
printf( "Write Buffer is %%%g full: %ld of %ld.\n",
100 - 100 * (float)avail / (float) blio->outputRingBuffer.bufferSize,
framesAvailable, blio->outputRingBuffer.bufferSize );
*/
if( framesAvailable == 0 ) {
#ifdef PA_MAC_BLIO_MUTEX
/*block while full*/
ret = UNIX_ERR( pthread_mutex_lock( &blio->outputMutex ) );
if( ret )
return ret;
while( blio->isOutputFull ) {
ret = UNIX_ERR( pthread_cond_wait( &blio->outputCond, &blio->outputMutex ) );
if( ret )
return ret;
}
ret = UNIX_ERR( pthread_mutex_unlock( &blio->outputMutex ) );
if( ret )
return ret;
#else
Pa_Sleep( PA_MAC_BLIO_BUSY_WAIT_SLEEP_INTERVAL );
#endif
}
} while( framesAvailable == 0 && macStream->state != STOPPING );
if( macStream->state == STOPPING )
{
break;
}
framesToTransfer = MIN( framesAvailable, framesRequested );
framesTransferred = PaUtil_WriteRingBuffer( &blio->outputRingBuffer, (void *)cbuf, framesToTransfer );
cbuf += framesTransferred * blio->outputSampleSizeActual * blio->outChan;
framesRequested -= framesTransferred;
#ifdef PA_MAC_BLIO_MUTEX
if( framesToTransfer == framesAvailable ) {
/* we just filled up the buffer, so we need to mark it as filled. */
ret = blioSetIsOutputFull( blio, true );
if( ret )
return ret;
/* of course, in the meantime, we may have emptied the buffer, so
so check for that, too, to avoid a race condition. */
if( PaUtil_GetRingBufferWriteAvailable( &blio->outputRingBuffer ) ) {
blioSetIsOutputFull( blio, false );
/* FIXME remove or review this code, does not fix race, ret not set! */
if( ret )
return ret;
}
}
#endif
}
if ( macStream->state == STOPPING )
{
ret = paInternalError;
}
else if (ret == paNoError )
{
/* Test for underflow. */
ret = blio->statusFlags & paOutputUnderflow;
/* report underflow only once: */
if( ret )
{
OSAtomicAnd32( (uint32_t)(~paOutputUnderflow), &blio->statusFlags );
ret = paOutputUnderflowed;
}
}
return ret;
}
PaError ReadStream( PaStream* stream,
void *buffer,
unsigned long framesRequested )
{
PaMacBlio *blio = & ((PaMacCoreStream*)stream) -> blio;
char *cbuf = (char *) buffer;
PaError ret = paNoError;
VVDBUG(("ReadStream()\n"));
while( framesRequested > 0 ) {
ring_buffer_size_t framesAvailable;
ring_buffer_size_t framesToTransfer;
ring_buffer_size_t framesTransferred;
do {
framesAvailable = PaUtil_GetRingBufferReadAvailable( &blio->inputRingBuffer );
/*
printf( "Read Buffer is %%%g full: %ld of %ld.\n",
100 * (float)avail / (float) blio->inputRingBuffer.bufferSize,
framesAvailable, blio->inputRingBuffer.bufferSize );
*/
if( framesAvailable == 0 ) {
#ifdef PA_MAC_BLIO_MUTEX
/**block when empty*/
ret = UNIX_ERR( pthread_mutex_lock( &blio->inputMutex ) );
if( ret )
return ret;
while( blio->isInputEmpty ) {
ret = UNIX_ERR( pthread_cond_wait( &blio->inputCond, &blio->inputMutex ) );
if( ret )
return ret;
}
ret = UNIX_ERR( pthread_mutex_unlock( &blio->inputMutex ) );
if( ret )
return ret;
#else
Pa_Sleep( PA_MAC_BLIO_BUSY_WAIT_SLEEP_INTERVAL );
#endif
}
} while( framesAvailable == 0 );
framesToTransfer = (ring_buffer_size_t) MIN( framesAvailable, framesRequested );
framesTransferred = PaUtil_ReadRingBuffer( &blio->inputRingBuffer, (void *)cbuf, framesToTransfer );
cbuf += framesTransferred * blio->inputSampleSizeActual * blio->inChan;
framesRequested -= framesTransferred;
if( framesToTransfer == framesAvailable ) {
#ifdef PA_MAC_BLIO_MUTEX
/* we just emptied the buffer, so we need to mark it as empty. */
ret = blioSetIsInputEmpty( blio, true );
if( ret )
return ret;
/* of course, in the meantime, the callback may have put some sats
in, so
so check for that, too, to avoid a race condition. */
/* FIXME - this does not seem to fix any race condition. */
if( PaUtil_GetRingBufferReadAvailable( &blio->inputRingBuffer ) ) {
blioSetIsInputEmpty( blio, false );
/* FIXME - why check? ret has not been set? */
if( ret )
return ret;
}
#endif
}
}
/* Report either paNoError or paInputOverflowed. */
/* may also want to report other errors, but this is non-standard. */
/* FIXME should not clobber ret, use if(blio->statusFlags & paInputOverflow) */
ret = blio->statusFlags & paInputOverflow;
/* report underflow only once: */
if( ret ) {
OSAtomicAnd32( (uint32_t)(~paInputOverflow), &blio->statusFlags );
ret = paInputOverflowed;
}
return ret;
}