Exemplo n.º 1
0
/*
	========================================================================
	
	Routine Description:
		Set LED Status

	Arguments:
		pAd						Pointer to our adapter
		Status					LED Status

	Return Value:
		None

	IRQL = PASSIVE_LEVEL
	IRQL = DISPATCH_LEVEL
	
	Note:
	
	========================================================================
*/
VOID RTMPSetLEDStatus(RTMP_ADAPTER *pAd, UCHAR Status)
{
	/*ULONG			data; */
	UCHAR			LinkStatus = 0;
	UCHAR			LedMode;
	UCHAR			MCUCmd = 0;
	BOOLEAN 		bIgnored = FALSE;
#ifdef MT7628
	INT 				LED_CMD = -1;
#endif /*MT7628*/
#ifdef WSC_INCLUDED
#ifdef WSC_LED_SUPPORT
	PWSC_CTRL		pWscControl = NULL;

#ifdef CONFIG_AP_SUPPORT
	pWscControl = &pAd->ApCfg.MBSSID[MAIN_MBSSID].WscControl;
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
	pWscControl = &pAd->StaCfg.WscControl;
#endif /* CONFIG_STA_SUPPORT */
#endif /* WSC_LED_SUPPORT */
#endif /* WSC_INCLUDED */

#ifdef CONFIG_ATE
	/*
		In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
		So LED mode is not supported when ATE is running.
	*/
	if (!IS_RT3572(pAd))
	{
		if (ATE_ON(pAd))
			return;
	}
#endif /* CONFIG_ATE */



	LedMode = 1;//LED_MODE(pAd);
#ifdef MT7628
	if (IS_MT7603(pAd) || IS_MT7628(pAd))
	{
		if (LedMode < 0 || Status <0 || LedMode > 15 || Status > 11)
			return;
		else
			LED_CMD = LED_Array[LedMode][Status];
	}
#endif /*MT7628*/
	switch (Status)
	{
		case LED_LINK_DOWN:
			LinkStatus = LINK_STATUS_LINK_DOWN;
			pAd->LedCntl.LedIndicatorStrength = 0;
			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_LINK_UP:
			if (pAd->CommonCfg.Channel > 14)
				LinkStatus = LINK_STATUS_ABAND_LINK_UP;
			else
				LinkStatus = LINK_STATUS_GBAND_LINK_UP;

			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_RADIO_ON:
			LinkStatus = LINK_STATUS_RADIO_ON;
			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_HALT: 
			LedMode = 0; /* Driver sets MAC register and MAC controls LED */
		case LED_RADIO_OFF:
			LinkStatus = LINK_STATUS_RADIO_OFF;
			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_WPS:
			LinkStatus = LINK_STATUS_WPS;
			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_ON_SITE_SURVEY:
			LinkStatus = LINK_STATUS_ON_SITE_SURVEY;
			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_POWER_UP:
			LinkStatus = LINK_STATUS_POWER_UP;
			MCUCmd = MCU_SET_LED_MODE;
			break;
#ifdef CONFIG_ATE
#endif /* CONFIG_ATE */
#ifdef WSC_INCLUDED
#ifdef WSC_LED_SUPPORT
		case LED_WPS_IN_PROCESS:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_IN_PROCESS;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_IN_PROCESS;
				MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: LED_WPS_IN_PROCESS\n", __FUNCTION__));				
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_ERROR:
			if (WscSupportWPSLEDMode(pAd))
			{
				/* In the case of LED mode 9, the error LED should be turned on only after WPS walk time expiration. */
				if ((pWscControl->bWPSWalkTimeExpiration == FALSE) && 
					 (LED_MODE(pAd) == WPS_LED_MODE_9))
				{
					/* do nothing. */
				}
				else
				{
					LinkStatus = LINK_STATUS_WPS_ERROR;
					MCUCmd = MCU_SET_WPS_LED_MODE;
				}
		
				pWscControl->WscLEDMode = LED_WPS_ERROR;
				pWscControl->WscLastWarningLEDMode = LED_WPS_ERROR;
				
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_SESSION_OVERLAP_DETECTED:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_SESSION_OVERLAP_DETECTED;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_SESSION_OVERLAP_DETECTED;
				pWscControl->WscLastWarningLEDMode = LED_WPS_SESSION_OVERLAP_DETECTED;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_SUCCESS:
			if (WscSupportWPSLEDMode(pAd))
			{
				if ((LED_MODE(pAd) == WPS_LED_MODE_7) || 
					(LED_MODE(pAd) == WPS_LED_MODE_11) || 
					(LED_MODE(pAd) == WPS_LED_MODE_12)
					)
				{
					/* In the WPS LED mode 7, 11 and 12, the blue LED would last 300 seconds regardless of the AP's security settings. */
					LinkStatus = LINK_STATUS_WPS_SUCCESS_WITH_SECURITY;
					MCUCmd = MCU_SET_WPS_LED_MODE;
					pWscControl->WscLEDMode = LED_WPS_SUCCESS;
		
					/* Turn off the WPS successful LED pattern after 300 seconds. */
					RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
				}
				else if (LED_MODE(pAd) == WPS_LED_MODE_8) /* The WPS LED mode 8 */
				{
					if (WscAPHasSecuritySetting(pAd, pWscControl)) /* The WPS AP has the security setting. */
					{
						LinkStatus = LINK_STATUS_WPS_SUCCESS_WITH_SECURITY;
						MCUCmd = MCU_SET_WPS_LED_MODE;
						pWscControl->WscLEDMode = LED_WPS_SUCCESS;
		
						/* Turn off the WPS successful LED pattern after 300 seconds. */
						RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
					}
					else /* The WPS AP does not have the secuirty setting. */
					{
						LinkStatus = LINK_STATUS_WPS_SUCCESS_WITHOUT_SECURITY;
						MCUCmd = MCU_SET_WPS_LED_MODE;
						pWscControl->WscLEDMode = LED_WPS_SUCCESS;
		
						/* Turn off the WPS successful LED pattern after 300 seconds. */
						RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
					}
				}
				else if (LED_MODE(pAd) == WPS_LED_MODE_9) /* The WPS LED mode 9. */
				{
					/* Always turn on the WPS blue LED for 300 seconds. */
					LinkStatus = LINK_STATUS_WPS_BLUE_LED;
					MCUCmd = MCU_SET_WPS_LED_MODE;
					pWscControl->WscLEDMode = LED_WPS_SUCCESS;
		
					/* Turn off the WPS successful LED pattern after 300 seconds. */
					RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
					
				}
				else
				{
					MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: LED_WPS_SUCCESS (Incorrect LED mode = %d)\n", 
						__FUNCTION__, LED_MODE(pAd)));
					ASSERT(FALSE);
				}
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_TURN_LED_OFF:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_TURN_LED_OFF;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_TURN_LED_OFF;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_TURN_ON_BLUE_LED:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_BLUE_LED;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_SUCCESS;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_NORMAL_CONNECTION_WITHOUT_SECURITY:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_NORMAL_CONNECTION_WITHOUT_SECURITY;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_SUCCESS;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_NORMAL_CONNECTION_WITH_SECURITY:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_NORMAL_CONNECTION_WITH_SECURITY;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_SUCCESS;
			}
			else
				bIgnored = TRUE;
			break;
		/*WPS LED Mode 10 */
		case LED_WPS_MODE10_TURN_ON:
			if(WscSupportWPSLEDMode10(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_MODE10_TURN_ON;
				MCUCmd = MCU_SET_WPS_LED_MODE;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_MODE10_FLASH:
			if(WscSupportWPSLEDMode10(pAd))
			{	
				LinkStatus = LINK_STATUS_WPS_MODE10_FLASH;
				MCUCmd = MCU_SET_WPS_LED_MODE;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_MODE10_TURN_OFF:
			if(WscSupportWPSLEDMode10(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_MODE10_TURN_OFF;
				MCUCmd = MCU_SET_WPS_LED_MODE;;
			}
			else
				bIgnored = TRUE;
			break;
#endif /* WSC_LED_SUPPORT */
#endif /* WSC_INCLUDED */
		default:
			MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_WARN, ("RTMPSetLED::Unknown Status 0x%x\n", Status));
			break;
	}

#ifdef MT7628
	if (IS_MT7628(pAd))
	{
		AndesLedEnhanceOP(pAd, 0, 0, 0, LED_CMD);
		MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: LED_CMD:0x%x, LED Mode:0x%x, LinkStatus:0x%x\n", __FUNCTION__, LED_CMD, LedMode, LinkStatus)); 
	} else
#endif /*MT7628*/
	if (MCUCmd)
	{
		AsicSendCommandToMcu(pAd, MCUCmd, 0xff, LedMode, LinkStatus, FALSE);
		MTWF_LOG(DBG_CAT_ALL, DBG_SUBCAT_ALL, DBG_LVL_TRACE, ("%s: MCUCmd:0x%x, LED Mode:0x%x, LinkStatus:0x%x\n", __FUNCTION__, MCUCmd, LedMode, LinkStatus)); 
	}
	
	/*
		Keep LED status for LED SiteSurvey mode.
		After SiteSurvey, we will set the LED mode to previous status.
	*/
	if ((Status != LED_ON_SITE_SURVEY) && (Status != LED_POWER_UP) && (bIgnored == FALSE))
		pAd->LedCntl.LedStatus = Status;
    
}
Exemplo n.º 2
0
/*
	========================================================================
	
	Routine Description:
		Set LED Status

	Arguments:
		pAd						Pointer to our adapter
		Status					LED Status

	Return Value:
		None

	IRQL = PASSIVE_LEVEL
	IRQL = DISPATCH_LEVEL
	
	Note:
	
	========================================================================
*/
VOID RTMPSetLEDStatus(
	IN PRTMP_ADAPTER 	pAd, 
	IN UCHAR			Status)
{
	/*ULONG			data; */
	UCHAR			LinkStatus = 0;
	UCHAR			LedMode;
	UCHAR			MCUCmd = 0;
	BOOLEAN 		bIgnored = FALSE;
#ifdef WSC_INCLUDED
#ifdef WSC_LED_SUPPORT
	PWSC_CTRL		pWscControl = NULL;

#ifdef CONFIG_AP_SUPPORT
	pWscControl = &pAd->ApCfg.MBSSID[MAIN_MBSSID].WscControl;
#endif /* CONFIG_AP_SUPPORT */
#ifdef CONFIG_STA_SUPPORT
	pWscControl = &pAd->StaCfg.WscControl;
#endif /* CONFIG_STA_SUPPORT */
#endif /* WSC_LED_SUPPORT */
#endif /* WSC_INCLUDED */

#ifdef RALINK_ATE
	/*
		In ATE mode of RT2860 AP/STA, we have erased 8051 firmware.
		So LED mode is not supported when ATE is running.
	*/
	if (!IS_RT3572(pAd))
	{
		if (ATE_ON(pAd))
			return;
	}
#endif /* RALINK_ATE */



	LedMode = LED_MODE(pAd);
	switch (Status)
	{
		case LED_LINK_DOWN:
			LinkStatus = LINK_STATUS_LINK_DOWN;
			pAd->LedCntl.LedIndicatorStrength = 0;
			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_LINK_UP:
			if (pAd->CommonCfg.Channel > 14)
				LinkStatus = LINK_STATUS_ABAND_LINK_UP;
			else
				LinkStatus = LINK_STATUS_GBAND_LINK_UP;

			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_RADIO_ON:
			LinkStatus = LINK_STATUS_RADIO_ON;
			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_HALT: 
			LedMode = 0; /* Driver sets MAC register and MAC controls LED */
		case LED_RADIO_OFF:
			LinkStatus = LINK_STATUS_RADIO_OFF;
			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_WPS:
			LinkStatus = LINK_STATUS_WPS;
			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_ON_SITE_SURVEY:
			LinkStatus = LINK_STATUS_ON_SITE_SURVEY;
			MCUCmd = MCU_SET_LED_MODE;
			break;
		case LED_POWER_UP:
			LinkStatus = LINK_STATUS_POWER_UP;
			MCUCmd = MCU_SET_LED_MODE;
			break;
#ifdef RALINK_ATE
#endif /* RALINK_ATE */
#ifdef WSC_INCLUDED
#ifdef WSC_LED_SUPPORT
#ifdef CONFIG_WIFI_LED_SHARE
		case LED_WPS_PRE_STAGE:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_PRE_STAGE;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_PRE_STAGE;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_POST_STAGE:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_PRE_STAGE;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_POST_STAGE;
			}
			else
				bIgnored = TRUE;
			break;
#endif /* CONFIG_WIFI_LED_SHARE */
		case LED_WPS_IN_PROCESS:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_IN_PROCESS;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_IN_PROCESS;
				DBGPRINT(RT_DEBUG_TRACE, ("%s: LED_WPS_IN_PROCESS\n", __FUNCTION__));				
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_ERROR:
			if (WscSupportWPSLEDMode(pAd))
			{
				/* In the case of LED mode 9, the error LED should be turned on only after WPS walk time expiration. */
				if ((pWscControl->bWPSWalkTimeExpiration == FALSE) && 
					 (LED_MODE(pAd) == WPS_LED_MODE_9))
				{
					/* do nothing. */
				}
				else
				{
					LinkStatus = LINK_STATUS_WPS_ERROR;
					MCUCmd = MCU_SET_WPS_LED_MODE;
				}
		
				pWscControl->WscLEDMode = LED_WPS_ERROR;
				pWscControl->WscLastWarningLEDMode = LED_WPS_ERROR;
				
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_SESSION_OVERLAP_DETECTED:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_SESSION_OVERLAP_DETECTED;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_SESSION_OVERLAP_DETECTED;
				pWscControl->WscLastWarningLEDMode = LED_WPS_SESSION_OVERLAP_DETECTED;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_SUCCESS:
			if (WscSupportWPSLEDMode(pAd))
			{
				if ((LED_MODE(pAd) == WPS_LED_MODE_7) || 
					(LED_MODE(pAd) == WPS_LED_MODE_11) || 
					(LED_MODE(pAd) == WPS_LED_MODE_12)
#ifdef CONFIG_WIFI_LED_SHARE
					||(LED_MODE(pAd) == WPS_LED_MODE_SHARE)
#endif /* CONFIG_WIFI_LED_SHARE */
					)
				{
					/* In the WPS LED mode 7, 11 and 12, the blue LED would last 300 seconds regardless of the AP's security settings. */
					LinkStatus = LINK_STATUS_WPS_SUCCESS_WITH_SECURITY;
					MCUCmd = MCU_SET_WPS_LED_MODE;
					pWscControl->WscLEDMode = LED_WPS_SUCCESS;
		
					/* Turn off the WPS successful LED pattern after 300 seconds. */
					RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
				}
				else if (LED_MODE(pAd) == WPS_LED_MODE_8) /* The WPS LED mode 8 */
				{
					if (WscAPHasSecuritySetting(pAd, pWscControl)) /* The WPS AP has the security setting. */
					{
						LinkStatus = LINK_STATUS_WPS_SUCCESS_WITH_SECURITY;
						MCUCmd = MCU_SET_WPS_LED_MODE;
						pWscControl->WscLEDMode = LED_WPS_SUCCESS;
		
						/* Turn off the WPS successful LED pattern after 300 seconds. */
						RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
					}
					else /* The WPS AP does not have the secuirty setting. */
					{
						LinkStatus = LINK_STATUS_WPS_SUCCESS_WITHOUT_SECURITY;
						MCUCmd = MCU_SET_WPS_LED_MODE;
						pWscControl->WscLEDMode = LED_WPS_SUCCESS;
		
						/* Turn off the WPS successful LED pattern after 300 seconds. */
						RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
					}
				}
				else if (LED_MODE(pAd) == WPS_LED_MODE_9) /* The WPS LED mode 9. */
				{
					/* Always turn on the WPS blue LED for 300 seconds. */
					LinkStatus = LINK_STATUS_WPS_BLUE_LED;
					MCUCmd = MCU_SET_WPS_LED_MODE;
					pWscControl->WscLEDMode = LED_WPS_SUCCESS;
		
					/* Turn off the WPS successful LED pattern after 300 seconds. */
					RTMPSetTimer(&pWscControl->WscLEDTimer, WSC_SUCCESSFUL_LED_PATTERN_TIMEOUT);
					
				}
				else
				{
					DBGPRINT(RT_DEBUG_TRACE, ("%s: LED_WPS_SUCCESS (Incorrect LED mode = %d)\n", 
						__FUNCTION__, LED_MODE(pAd)));
					ASSERT(FALSE);
				}
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_TURN_LED_OFF:
			if (WscSupportWPSLEDMode(pAd))
			{
#ifdef CONFIG_WIFI_LED_SHARE
				USHORT value;
				RT28xx_EEPROM_READ16(pAd, EEPROM_FREQ_OFFSET, value);
				pAd->LedCntl.MCULedCntl.word = (value >> 8);
#endif /* CONFIG_WIFI_LED_SHARE */
				LinkStatus = LINK_STATUS_WPS_TURN_LED_OFF;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_TURN_LED_OFF;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_TURN_ON_BLUE_LED:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_BLUE_LED;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_SUCCESS;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_NORMAL_CONNECTION_WITHOUT_SECURITY:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_NORMAL_CONNECTION_WITHOUT_SECURITY;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_SUCCESS;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_NORMAL_CONNECTION_WITH_SECURITY:
			if (WscSupportWPSLEDMode(pAd))
			{
				LinkStatus = LINK_STATUS_NORMAL_CONNECTION_WITH_SECURITY;
				MCUCmd = MCU_SET_WPS_LED_MODE;
				pWscControl->WscLEDMode = LED_WPS_SUCCESS;
			}
			else
				bIgnored = TRUE;
			break;
		/*WPS LED Mode 10 */
		case LED_WPS_MODE10_TURN_ON:
			if(WscSupportWPSLEDMode10(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_MODE10_TURN_ON;
				MCUCmd = MCU_SET_WPS_LED_MODE;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_MODE10_FLASH:
			if(WscSupportWPSLEDMode10(pAd))
			{	
				LinkStatus = LINK_STATUS_WPS_MODE10_FLASH;
				MCUCmd = MCU_SET_WPS_LED_MODE;
			}
			else
				bIgnored = TRUE;
			break;
		case LED_WPS_MODE10_TURN_OFF:
			if(WscSupportWPSLEDMode10(pAd))
			{
				LinkStatus = LINK_STATUS_WPS_MODE10_TURN_OFF;
				MCUCmd = MCU_SET_WPS_LED_MODE;;
			}
			else
				bIgnored = TRUE;
			break;
#endif /* WSC_LED_SUPPORT */
#endif /* WSC_INCLUDED */
		default:
			DBGPRINT(RT_DEBUG_WARN, ("RTMPSetLED::Unknown Status 0x%x\n", Status));
			break;
	}