/**
* Multi-IFO version of XLALComputeAMCoeffs().
* Computes noise-weighted combined multi-IFO antenna pattern functions.
*
* \note *) contrary to LALGetMultiAMCoeffs(), and XLALComputeAMCoeffs(), this function applies
* the noise-weights and computes the multi-IFO antenna-pattern matrix components
* {A, B, C}, and single-IFO matrix components {A_X,B_X,C_X} for detector X.
*
* Therefore: DONT use XLALWeightMultiAMCoeffs() on the result!
*
* \note *) an input of multiWeights = NULL corresponds to unit-weights
*/
MultiAMCoeffs *
XLALComputeMultiAMCoeffs ( const MultiDetectorStateSeries *multiDetStates, /**< [in] detector-states at timestamps t_i */
const MultiNoiseWeights *multiWeights, /**< [in] noise-weigths at timestamps t_i (can be NULL) */
SkyPosition skypos /**< source sky-position [in equatorial coords!] */
)
{
/* check input consistency */
if ( !multiDetStates ) {
XLALPrintError ("%s: invalid NULL input argument 'multiDetStates'\n", __func__ );
XLAL_ERROR_NULL ( XLAL_EINVAL );
}
UINT4 numDetectors = multiDetStates->length;
/* prepare output vector */
MultiAMCoeffs *ret;
if ( ( ret = XLALCalloc( 1, sizeof( *ret ) )) == NULL ) {
XLALPrintError ("%s: failed to XLALCalloc( 1, %d)\n", __func__, sizeof( *ret ) );
XLAL_ERROR_NULL ( XLAL_ENOMEM );
}
ret->length = numDetectors;
if ( ( ret->data = XLALCalloc ( numDetectors, sizeof ( *ret->data ) )) == NULL ) {
XLALPrintError ("%s: failed to XLALCalloc(%d, %d)\n", __func__, numDetectors, sizeof ( *ret->data ) );
XLALFree ( ret );
XLAL_ERROR_NULL ( XLAL_ENOMEM );
}
/* loop over detectors and generate AMCoeffs for each one */
UINT4 X;
for ( X=0; X < numDetectors; X ++ )
{
if ( (ret->data[X] = XLALComputeAMCoeffs ( multiDetStates->data[X], skypos )) == NULL ) {
XLALPrintError ("%s: call to XLALComputeAMCoeffs() failed with xlalErrno = %d\n", __func__, xlalErrno );
XLALDestroyMultiAMCoeffs ( ret );
XLAL_ERROR_NULL ( XLAL_EFUNC );
}
} /* for X < numDetectors */
/* apply noise-weights and compute antenna-pattern matrix {A,B,C} */
if ( XLALWeightMultiAMCoeffs ( ret, multiWeights ) != XLAL_SUCCESS ) {
XLALPrintError ("%s: call to XLALWeightMultiAMCoeffs() failed with xlalErrno = %d\n", __func__, xlalErrno );
XLALDestroyMultiAMCoeffs ( ret );
XLAL_ERROR_NULL ( XLAL_EFUNC );
}
/* return result */
return ret;
} /* XLALComputeMultiAMCoeffs() */
/* Destruction of a ComputeFBuffer *contents*,
* i.e. the multiSSB and multiAMcoeff, while the
* buffer-container is not freed (which is why it's passed
* by value and not by reference...) */
static void
XLALEmptyComputeFBuffer ( ComputeFBuffer *cfb)
{
XLALDestroyMultiSSBtimes ( cfb->multiSSB );
cfb->multiSSB = NULL;
XLALDestroyMultiSSBtimes ( cfb->multiBinary );
cfb->multiBinary = NULL;
XLALDestroyMultiAMCoeffs ( cfb->multiAMcoef );
cfb->multiAMcoef = NULL;
return;
} // XLALDestroyComputeFBuffer()
static void
XLALDestroyDemodMethodData ( void* method_data )
{
DemodMethodData *demod = (DemodMethodData*) method_data;
XLALDestroyMultiSFTVector ( demod->multiSFTs);
XLALDestroyMultiSSBtimes ( demod->prevMultiSSBtimes );
XLALDestroyMultiAMCoeffs ( demod->prevMultiAMcoef );
XLALFree ( demod );
} // XLALDestroyDemodMethodData()
// ----- local function definitions ----------
static int
XLALComputeFstatDemod ( FstatResults* Fstats,
const FstatCommon *common,
void *method_data
)
{
// Check input
XLAL_CHECK(Fstats != NULL, XLAL_EFAULT);
XLAL_CHECK(common != NULL, XLAL_EFAULT);
XLAL_CHECK(method_data != NULL, XLAL_EFAULT);
DemodMethodData *demod = (DemodMethodData*) method_data;
// get internal timing info
DemodTimingInfo *ti = &(demod->timingInfo);
REAL8 tic = 0, toc = 0;
// Get which F-statistic quantities to compute
const FstatQuantities whatToCompute = Fstats->whatWasComputed;
// handy shortcuts
BOOLEAN returnAtoms = (whatToCompute & FSTATQ_ATOMS_PER_DET);
PulsarDopplerParams thisPoint = Fstats->doppler;
const REAL8 fStart = thisPoint.fkdot[0];
const MultiSFTVector *multiSFTs = demod->multiSFTs;
const MultiNoiseWeights *multiWeights = common->multiNoiseWeights;
const MultiDetectorStateSeries *multiDetStates = common->multiDetectorStates;
UINT4 numDetectors = multiSFTs->length;
XLAL_CHECK ( multiDetStates->length == numDetectors, XLAL_EINVAL );
XLAL_CHECK ( multiWeights==NULL || (multiWeights->length == numDetectors), XLAL_EINVAL );
UINT4 numSFTs = 0;
for ( UINT4 X = 0; X < numDetectors; X ++ ) {
numSFTs += multiDetStates->data[X]->length;
}
// initialize timing info struct
if ( ti->collectTiming )
{
XLAL_INIT_MEM ( (*ti) );
ti->collectTiming = 1;
ti->numDetectors = numDetectors;
ti->numFreqBins = Fstats->numFreqBins;
ti->numSFTs = numSFTs;
tic = XLALGetCPUTime();
}
MultiSSBtimes *multiSSB = NULL;
MultiAMCoeffs *multiAMcoef = NULL;
// ----- check if we have buffered SSB+AMcoef for current sky-position
if ( (demod->prevAlpha == thisPoint.Alpha) && (demod->prevDelta == thisPoint.Delta ) &&
(demod->prevMultiSSBtimes != NULL) && ( XLALGPSDiff(&demod->prevRefTime, &thisPoint.refTime) == 0 ) && // have SSB times for same reftime?
(demod->prevMultiAMcoef != NULL)
)
{ // if yes ==> reuse
multiSSB = demod->prevMultiSSBtimes;
multiAMcoef = demod->prevMultiAMcoef;
}
else
{ // if not, compute SSB + AMcoef for this skyposition
SkyPosition skypos;
skypos.system = COORDINATESYSTEM_EQUATORIAL;
skypos.longitude = thisPoint.Alpha;
skypos.latitude = thisPoint.Delta;
XLAL_CHECK ( (multiSSB = XLALGetMultiSSBtimes ( multiDetStates, skypos, thisPoint.refTime, common->SSBprec )) != NULL, XLAL_EFUNC );
XLAL_CHECK ( (multiAMcoef = XLALComputeMultiAMCoeffs ( multiDetStates, multiWeights, skypos )) != NULL, XLAL_EFUNC );
// store these for possible later re-use in buffer
XLALDestroyMultiSSBtimes ( demod->prevMultiSSBtimes );
demod->prevMultiSSBtimes = multiSSB;
demod->prevRefTime = thisPoint.refTime;
XLALDestroyMultiAMCoeffs ( demod->prevMultiAMcoef );
demod->prevMultiAMcoef = multiAMcoef;
demod->prevAlpha = thisPoint.Alpha;
demod->prevDelta = thisPoint.Delta;
} // if could not reuse previously buffered quantites
MultiSSBtimes *multiBinary = NULL;
MultiSSBtimes *multiSSBTotal = NULL;
// handle binary-orbital timing corrections, if applicable
if ( thisPoint.asini > 0 )
{
// compute binary time corrections to the SSB time delays and SSB time derivitive
XLAL_CHECK ( XLALAddMultiBinaryTimes ( &multiBinary, multiSSB, &thisPoint ) == XLAL_SUCCESS, XLAL_EFUNC );
multiSSBTotal = multiBinary;
}
else
{
multiSSBTotal = multiSSB;
}
if ( ti->collectTiming ) {
toc = XLALGetCPUTime();
ti->tauBary = (toc - tic);
}
// ----- compute final Fstatistic-value -----
REAL4 Ad = multiAMcoef->Mmunu.Ad;
REAL4 Bd = multiAMcoef->Mmunu.Bd;
REAL4 Cd = multiAMcoef->Mmunu.Cd;
REAL4 Ed = multiAMcoef->Mmunu.Ed;;
REAL4 Dd_inv = 1.0 / multiAMcoef->Mmunu.Dd;
// ---------- Compute F-stat for each frequency bin ----------
for ( UINT4 k = 0; k < Fstats->numFreqBins; k++ )
{
// Set frequency to search at
thisPoint.fkdot[0] = fStart + k * Fstats->dFreq;
COMPLEX8 Fa = 0; // complex amplitude Fa
COMPLEX8 Fb = 0; // complex amplitude Fb
MultiFstatAtomVector *multiFstatAtoms = NULL; // per-IFO, per-SFT arrays of F-stat 'atoms', ie quantities required to compute F-stat
// prepare return of 'FstatAtoms' if requested
if ( returnAtoms )
{
XLAL_CHECK ( (multiFstatAtoms = XLALMalloc ( sizeof(*multiFstatAtoms) )) != NULL, XLAL_ENOMEM );
multiFstatAtoms->length = numDetectors;
XLAL_CHECK ( (multiFstatAtoms->data = XLALMalloc ( numDetectors * sizeof(*multiFstatAtoms->data) )) != NULL, XLAL_ENOMEM );
} // if returnAtoms
// loop over detectors and compute all detector-specific quantities
for ( UINT4 X=0; X < numDetectors; X ++)
{
COMPLEX8 FaX, FbX;
FstatAtomVector *FstatAtoms = NULL;
FstatAtomVector **FstatAtoms_p = returnAtoms ? (&FstatAtoms) : NULL;
// call XLALComputeFaFb_...() function for the user-requested hotloop variant
XLAL_CHECK ( (demod->computefafb_func) ( &FaX, &FbX, FstatAtoms_p, multiSFTs->data[X], thisPoint.fkdot,
multiSSBTotal->data[X], multiAMcoef->data[X], demod->Dterms ) == XLAL_SUCCESS, XLAL_EFUNC );
if ( returnAtoms ) {
multiFstatAtoms->data[X] = FstatAtoms; // copy pointer to IFO-specific Fstat-atoms 'contents'
}
XLAL_CHECK ( isfinite(creal(FaX)) && isfinite(cimag(FaX)) && isfinite(creal(FbX)) && isfinite(cimag(FbX)), XLAL_EFPOVRFLW );
if ( whatToCompute & FSTATQ_FAFB_PER_DET )
{
Fstats->FaPerDet[X][k] = FaX;
Fstats->FbPerDet[X][k] = FbX;
}
// compute single-IFO F-stats, if requested
if ( whatToCompute & FSTATQ_2F_PER_DET )
{
REAL4 AdX = multiAMcoef->data[X]->A;
REAL4 BdX = multiAMcoef->data[X]->B;
REAL4 CdX = multiAMcoef->data[X]->C;
REAL4 EdX = 0;
REAL4 DdX_inv = 1.0 / multiAMcoef->data[X]->D;
// compute final single-IFO F-stat
Fstats->twoFPerDet[X][k] = XLALComputeFstatFromFaFb ( FaX, FbX, AdX, BdX, CdX, EdX, DdX_inv );
} // if FSTATQ_2F_PER_DET
/* Fa = sum_X Fa_X */
Fa += FaX;
/* Fb = sum_X Fb_X */
Fb += FbX;
} // for X < numDetectors
if ( whatToCompute & FSTATQ_2F )
{
Fstats->twoF[k] = XLALComputeFstatFromFaFb ( Fa, Fb, Ad, Bd, Cd, Ed, Dd_inv );
}
// Return multi-detector Fa & Fb
if ( whatToCompute & FSTATQ_FAFB )
{
Fstats->Fa[k] = Fa;
Fstats->Fb[k] = Fb;
}
// Return F-atoms per detector
if ( whatToCompute & FSTATQ_ATOMS_PER_DET )
{
XLALDestroyMultiFstatAtomVector ( Fstats->multiFatoms[k] );
Fstats->multiFatoms[k] = multiFstatAtoms;
}
} // for k < Fstats->numFreqBins
// this needs to be free'ed, as it's currently not buffered
XLALDestroyMultiSSBtimes ( multiBinary );
// Return amplitude modulation coefficients
Fstats->Mmunu = demod->prevMultiAMcoef->Mmunu;
// return per-detector antenna-pattern matrices
for ( UINT4 X=0; X < numDetectors; X ++ )
{
Fstats->MmunuX[X].Ad = multiAMcoef->data[X]->A;
Fstats->MmunuX[X].Bd = multiAMcoef->data[X]->B;
Fstats->MmunuX[X].Cd = multiAMcoef->data[X]->C;
Fstats->MmunuX[X].Dd = multiAMcoef->data[X]->D;
Fstats->MmunuX[X].Ed = 0;
}
if ( ti->collectTiming ) {
toc = XLALGetCPUTime();
ti->tauTotal = (toc - tic);
ti->tauF1NoBuf = ti->tauTotal / ( Fstats->numFreqBins * numDetectors );
ti->tauF1Buf = (ti->tauTotal - ti->tauBary) / ( Fstats->numFreqBins * numDetectors );
}
return XLAL_SUCCESS;
} // XLALComputeFstatDemod()
int main(int argc, char *argv[]){
UserInput_t XLAL_INIT_DECL(uvar);
static ConfigVariables config;
/* sft related variables */
MultiSFTVector *inputSFTs = NULL;
MultiPSDVector *multiPSDs = NULL;
MultiNoiseWeights *multiWeights = NULL;
MultiLIGOTimeGPSVector *multiTimes = NULL;
MultiLALDetector multiDetectors;
MultiDetectorStateSeries *multiStates = NULL;
MultiAMCoeffs *multiCoeffs = NULL;
SFTIndexList *sftIndices = NULL;
SFTPairIndexList *sftPairs = NULL;
REAL8Vector *shiftedFreqs = NULL;
UINT4Vector *lowestBins = NULL;
COMPLEX8Vector *expSignalPhases = NULL;
REAL8VectorSequence *sincList = NULL;
PulsarDopplerParams XLAL_INIT_DECL(dopplerpos);
PulsarDopplerParams thisBinaryTemplate, binaryTemplateSpacings;
PulsarDopplerParams minBinaryTemplate, maxBinaryTemplate;
SkyPosition XLAL_INIT_DECL(skyPos);
MultiSSBtimes *multiBinaryTimes = NULL;
INT4 k;
UINT4 j;
REAL8 fMin, fMax; /* min and max frequencies read from SFTs */
REAL8 deltaF; /* frequency resolution associated with time baseline of SFTs */
REAL8 diagff = 0; /*diagonal metric components*/
REAL8 diagaa = 0;
REAL8 diagTT = 0;
REAL8 diagpp = 1;
REAL8 ccStat = 0;
REAL8 evSquared=0;
REAL8 estSens=0; /*estimated sensitivity(4.13)*/
BOOLEAN dopplerShiftFlag = TRUE;
toplist_t *ccToplist=NULL;
CrossCorrBinaryOutputEntry thisCandidate;
UINT4 checksum;
LogPrintf (LOG_CRITICAL, "Starting time\n"); /*for debug convenience to record calculating time*/
/* initialize and register user variables */
LIGOTimeGPS computingStartGPSTime, computingEndGPSTime;
XLALGPSTimeNow (&computingStartGPSTime); /* record the rough starting GPS time*/
if ( XLALInitUserVars( &uvar ) != XLAL_SUCCESS ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALInitUserVars() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* read user input from the command line or config file */
if ( XLALUserVarReadAllInput ( argc, argv ) != XLAL_SUCCESS ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALUserVarReadAllInput() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
if (uvar.help) /* if help was requested, then exit */
return 0;
CHAR *VCSInfoString = XLALGetVersionString(0); /**<LAL + LALapps Vsersion string*/
/*If the version information was requested, output it and exit*/
if ( uvar.version ){
XLAL_CHECK ( VCSInfoString != NULL, XLAL_EFUNC, "XLALGetVersionString(0) failed.\n" );
printf ("%s\n", VCSInfoString );
exit (0);
}
/* configure useful variables based on user input */
if ( XLALInitializeConfigVars ( &config, &uvar) != XLAL_SUCCESS ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALInitUserVars() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
deltaF = config.catalog->data[0].header.deltaF;
REAL8 Tsft = 1.0 / deltaF;
if (XLALUserVarWasSet(&uvar.spacingF) && XLALUserVarWasSet(&uvar.mismatchF))
LogPrintf (LOG_CRITICAL, "spacingF and mismatchF are both set, use spacingF %.9g by default\n\n", uvar.spacingF);
if (XLALUserVarWasSet(&uvar.spacingA) && XLALUserVarWasSet(&uvar.mismatchA))
LogPrintf (LOG_CRITICAL, "spacingA and mismatchA are both set, use spacingA %.9g by default\n\n", uvar.spacingA);
if (XLALUserVarWasSet(&uvar.spacingT) && XLALUserVarWasSet(&uvar.mismatchT))
LogPrintf (LOG_CRITICAL, "spacingT and mismatchT are both set, use spacingT %.9g by default\n\n", uvar.spacingT);
if (XLALUserVarWasSet(&uvar.spacingP) && XLALUserVarWasSet(&uvar.mismatchP))
LogPrintf (LOG_CRITICAL, "spacingP and mismatchP are both set, use spacingP %.9g by default\n\n", uvar.spacingP);
/* create the toplist */
create_crossCorrBinary_toplist( &ccToplist, uvar.numCand);
/* now read the data */
/* /\* get SFT parameters so that we can initialise search frequency resolutions *\/ */
/* /\* calculate deltaF_SFT *\/ */
/* deltaF_SFT = catalog->data[0].header.deltaF; /\* frequency resolution *\/ */
/* timeBase= 1.0/deltaF_SFT; /\* sft baseline *\/ */
/* /\* catalog is ordered in time so we can get start, end time and tObs *\/ */
/* firstTimeStamp = catalog->data[0].header.epoch; */
/* lastTimeStamp = catalog->data[catalog->length - 1].header.epoch; */
/* tObs = XLALGPSDiff( &lastTimeStamp, &firstTimeStamp ) + timeBase; */
/* /\*set pulsar reference time *\/ */
/* if (LALUserVarWasSet ( &uvar_refTime )) { */
/* XLALGPSSetREAL8(&refTime, uvar_refTime); */
/* } */
/* else { /\*if refTime is not set, set it to midpoint of sfts*\/ */
/* XLALGPSSetREAL8(&refTime, (0.5*tObs) + XLALGPSGetREAL8(&firstTimeStamp)); */
/* } */
/* /\* set frequency resolution defaults if not set by user *\/ */
/* if (!(LALUserVarWasSet (&uvar_fResolution))) { */
/* uvar_fResolution = 1/tObs; */
/* } */
/* { */
/* /\* block for calculating frequency range to read from SFTs *\/ */
/* /\* user specifies freq and fdot range at reftime */
/* we translate this range of fdots to start and endtime and find */
/* the largest frequency band required to cover the */
/* frequency evolution *\/ */
/* PulsarSpinRange spinRange_startTime; /\**< freq and fdot range at start-time of observation *\/ */
/* PulsarSpinRange spinRange_endTime; /\**< freq and fdot range at end-time of observation *\/ */
/* PulsarSpinRange spinRange_refTime; /\**< freq and fdot range at the reference time *\/ */
/* REAL8 startTime_freqLo, startTime_freqHi, endTime_freqLo, endTime_freqHi, freqLo, freqHi; */
/* REAL8Vector *fdotsMin=NULL; */
/* REAL8Vector *fdotsMax=NULL; */
/* UINT4 k; */
/* fdotsMin = (REAL8Vector *)LALCalloc(1, sizeof(REAL8Vector)); */
/* fdotsMin->length = N_SPINDOWN_DERIVS; */
/* fdotsMin->data = (REAL8 *)LALCalloc(fdotsMin->length, sizeof(REAL8)); */
/* fdotsMax = (REAL8Vector *)LALCalloc(1, sizeof(REAL8Vector)); */
/* fdotsMax->length = N_SPINDOWN_DERIVS; */
/* fdotsMax->data = (REAL8 *)LALCalloc(fdotsMax->length, sizeof(REAL8)); */
/* XLAL_INIT_MEM(spinRange_startTime); */
/* XLAL_INIT_MEM(spinRange_endTime); */
/* XLAL_INIT_MEM(spinRange_refTime); */
/* spinRange_refTime.refTime = refTime; */
/* spinRange_refTime.fkdot[0] = uvar_f0; */
/* spinRange_refTime.fkdotBand[0] = uvar_fBand; */
/* } */
/* FIXME: need to correct fMin and fMax for Doppler shift, rngmedian bins and spindown range */
/* this is essentially just a place holder for now */
/* FIXME: this running median buffer is overkill, since the running median block need not be centered on the search frequency */
REAL8 vMax = LAL_TWOPI * (uvar.orbitAsiniSec + uvar.orbitAsiniSecBand) / uvar.orbitPSec + LAL_TWOPI * LAL_REARTH_SI / (LAL_DAYSID_SI * LAL_C_SI) + LAL_TWOPI * LAL_AU_SI/(LAL_YRSID_SI * LAL_C_SI); /*calculate the maximum relative velocity in speed of light*/
fMin = uvar.fStart * (1 - vMax) - 0.5 * uvar.rngMedBlock * deltaF;
fMax = (uvar.fStart + uvar.fBand) * (1 + vMax) + 0.5 * uvar.rngMedBlock * deltaF;
/* read the SFTs*/
if ((inputSFTs = XLALLoadMultiSFTs ( config.catalog, fMin, fMax)) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALLoadMultiSFTs() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* calculate the psd and normalize the SFTs */
if (( multiPSDs = XLALNormalizeMultiSFTVect ( inputSFTs, uvar.rngMedBlock, NULL )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALNormalizeMultiSFTVect() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* compute the noise weights for the AM coefficients */
if (( multiWeights = XLALComputeMultiNoiseWeights ( multiPSDs, uvar.rngMedBlock, 0 )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALComputeMultiNoiseWeights() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* read the timestamps from the SFTs */
if ((multiTimes = XLALExtractMultiTimestampsFromSFTs ( inputSFTs )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALExtractMultiTimestampsFromSFTs() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* read the detector information from the SFTs */
if ( XLALMultiLALDetectorFromMultiSFTs ( &multiDetectors, inputSFTs ) != XLAL_SUCCESS){
LogPrintf ( LOG_CRITICAL, "%s: XLALMultiLALDetectorFromMultiSFTs() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* Find the detector state for each SFT */
/* Offset by Tsft/2 to get midpoint as timestamp */
if ((multiStates = XLALGetMultiDetectorStates ( multiTimes, &multiDetectors, config.edat, 0.5 * Tsft )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALGetMultiDetectorStates() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* Note this is specialized to a single sky position */
/* This might need to be moved into the config variables */
skyPos.system = COORDINATESYSTEM_EQUATORIAL;
skyPos.longitude = uvar.alphaRad;
skyPos.latitude = uvar.deltaRad;
/* Calculate the AM coefficients (a,b) for each SFT */
if ((multiCoeffs = XLALComputeMultiAMCoeffs ( multiStates, multiWeights, skyPos )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALComputeMultiAMCoeffs() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* Construct the flat list of SFTs (this sort of replicates the
catalog, but there's not an obvious way to get the information
back) */
if ( ( XLALCreateSFTIndexListFromMultiSFTVect( &sftIndices, inputSFTs ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateSFTIndexListFromMultiSFTVect() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* Construct the list of SFT pairs */
#define PCC_SFTPAIR_HEADER "# The length of SFT-pair list is %u #\n"
#define PCC_SFTPAIR_BODY "%u %u\n"
#define PCC_SFT_HEADER "# The length of SFT list is %u #\n"
#define PCC_SFT_BODY "%s %d %d\n"
FILE *fp = NULL;
if (XLALUserVarWasSet(&uvar.pairListInputFilename)) { /* If the user provided a list for reading, use it */
if((sftPairs = XLALCalloc(1, sizeof(sftPairs))) == NULL){
XLAL_ERROR(XLAL_ENOMEM);
}
if((fp = fopen(uvar.pairListInputFilename, "r")) == NULL){
LogPrintf ( LOG_CRITICAL, "didn't find SFT-pair list file with given input name\n");
XLAL_ERROR( XLAL_EFUNC );
}
if(fscanf(fp,PCC_SFTPAIR_HEADER,&sftPairs->length)==EOF){
LogPrintf ( LOG_CRITICAL, "can't read the length of SFT-pair list from the header\n");
XLAL_ERROR( XLAL_EFUNC );
}
if((sftPairs->data = XLALCalloc(sftPairs->length, sizeof(*sftPairs->data)))==NULL){
XLALFree(sftPairs);
XLAL_ERROR(XLAL_ENOMEM);
}
for(j = 0; j < sftPairs->length; j++){ /*read in the SFT-pair list */
if(fscanf(fp,PCC_SFTPAIR_BODY, &sftPairs->data[j].sftNum[0], &sftPairs->data[j].sftNum[1])==EOF){
LogPrintf ( LOG_CRITICAL, "The length of SFT-pair list doesn't match!");
XLAL_ERROR( XLAL_EFUNC );
}
}
fclose(fp);
}
else { /* if not, construct the list of pairs */
if ( ( XLALCreateSFTPairIndexList( &sftPairs, sftIndices, inputSFTs, uvar.maxLag, uvar.inclAutoCorr ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateSFTPairIndexList() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
}
if (XLALUserVarWasSet(&uvar.pairListOutputFilename)) { /* Write the list of pairs to a file, if a name was provided */
if((fp = fopen(uvar.pairListOutputFilename, "w")) == NULL){
LogPrintf ( LOG_CRITICAL, "Can't write in SFT-pair list \n");
XLAL_ERROR( XLAL_EFUNC );
}
fprintf(fp,PCC_SFTPAIR_HEADER, sftPairs->length ); /*output the length of SFT-pair list to the header*/
for(j = 0; j < sftPairs->length; j++){
fprintf(fp,PCC_SFTPAIR_BODY, sftPairs->data[j].sftNum[0], sftPairs->data[j].sftNum[1]);
}
fclose(fp);
}
if (XLALUserVarWasSet(&uvar.sftListOutputFilename)) { /* Write the list of SFTs to a file for sanity-checking purposes */
if((fp = fopen(uvar.sftListOutputFilename, "w")) == NULL){
LogPrintf ( LOG_CRITICAL, "Can't write in flat SFT list \n");
XLAL_ERROR( XLAL_EFUNC );
}
fprintf(fp,PCC_SFT_HEADER, sftIndices->length ); /*output the length of SFT list to the header*/
for(j = 0; j < sftIndices->length; j++){ /*output the SFT list */
fprintf(fp,PCC_SFT_BODY, inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].name, inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].epoch.gpsSeconds, inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].epoch.gpsNanoSeconds);
}
fclose(fp);
}
else if(XLALUserVarWasSet(&uvar.sftListInputFilename)){ /*do a sanity check of the order of SFTs list if the name of input SFT list is given*/
UINT4 numofsft=0;
if((fp = fopen(uvar.sftListInputFilename, "r")) == NULL){
LogPrintf ( LOG_CRITICAL, "Can't read in flat SFT list \n");
XLAL_ERROR( XLAL_EFUNC );
}
if (fscanf(fp, PCC_SFT_HEADER, &numofsft)==EOF){
LogPrintf ( LOG_CRITICAL, "can't read in the length of SFT list from header\n");
XLAL_ERROR( XLAL_EFUNC );
}
CHARVectorSequence *checkDet=NULL;
if ((checkDet = XLALCreateCHARVectorSequence (numofsft, LALNameLength) ) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateCHARVector() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
INT4 checkGPS[numofsft], checkGPSns[numofsft];
if(numofsft == sftIndices->length){
for (j=0; j<numofsft; j++){
if( fscanf(fp,PCC_SFT_BODY,&checkDet->data[j * LALNameLength], &checkGPS[j], &checkGPSns[j])==EOF){
LogPrintf ( LOG_CRITICAL, "The length of SFT list doesn't match\n");
XLAL_ERROR( XLAL_EFUNC );
}
if(strcmp( inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].name, &checkDet->data[j * LALNameLength] ) != 0
||inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].epoch.gpsSeconds != checkGPS[j]
||inputSFTs->data[sftIndices->data[j].detInd]->data[sftIndices->data[j].sftInd].epoch.gpsNanoSeconds != checkGPSns[j] ){
LogPrintf ( LOG_CRITICAL, "The order of SFTs has been changed, it's the end of civilization\n");
XLAL_ERROR( XLAL_EFUNC );
}
}
fclose(fp);
XLALDestroyCHARVectorSequence(checkDet);
}
else{
LogPrintf ( LOG_CRITICAL, "Run for your life, the length of SFT list doesn't match");
XLAL_ERROR( XLAL_EFUNC );
}
}
else
{
}
/* Get weighting factors for calculation of metric */
/* note that the sigma-squared is now absorbed into the curly G
because the AM coefficients are noise-weighted. */
REAL8Vector *GammaAve = NULL;
REAL8Vector *GammaCirc = NULL;
if ( ( XLALCalculateCrossCorrGammas( &GammaAve, &GammaCirc, sftPairs, sftIndices, multiCoeffs) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCalculateCrossCorrGammas() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
#define PCC_GAMMA_HEADER "# The normalization Sinv_Tsft is %g #\n"
#define PCC_GAMMA_BODY "%.10g\n"
if (XLALUserVarWasSet(&uvar.gammaAveOutputFilename)) { /* Write the aa+bb weight for each pair to a file, if a name was provided */
if((fp = fopen(uvar.gammaAveOutputFilename, "w")) == NULL) {
LogPrintf ( LOG_CRITICAL, "Can't write in Gamma_ave list \n");
XLAL_ERROR( XLAL_EFUNC );
}
fprintf(fp,PCC_GAMMA_HEADER, multiWeights->Sinv_Tsft); /*output the normalization factor to the header*/
for(j = 0; j < sftPairs->length; j++){
fprintf(fp,PCC_GAMMA_BODY, GammaAve->data[j]);
}
fclose(fp);
}
if (XLALUserVarWasSet(&uvar.gammaCircOutputFilename)) { /* Write the ab-ba weight for each pair to a file, if a name was provided */
if((fp = fopen(uvar.gammaCircOutputFilename, "w")) == NULL) {
LogPrintf ( LOG_CRITICAL, "Can't write in Gamma_circ list \n");
XLAL_ERROR( XLAL_EFUNC );
}
fprintf(fp,PCC_GAMMA_HEADER, multiWeights->Sinv_Tsft); /*output the normalization factor to the header*/
for(j = 0; j < sftPairs->length; j++){
fprintf(fp,PCC_GAMMA_BODY, GammaCirc->data[j]);
}
fclose(fp);
}
/*initialize binary parameters structure*/
XLAL_INIT_MEM(minBinaryTemplate);
XLAL_INIT_MEM(maxBinaryTemplate);
XLAL_INIT_MEM(thisBinaryTemplate);
XLAL_INIT_MEM(binaryTemplateSpacings);
/*fill in minbinaryOrbitParams*/
XLALGPSSetREAL8( &minBinaryTemplate.tp, uvar.orbitTimeAsc);
minBinaryTemplate.argp = 0.0;
minBinaryTemplate.asini = uvar.orbitAsiniSec;
minBinaryTemplate.ecc = 0.0;
minBinaryTemplate.period = uvar.orbitPSec;
minBinaryTemplate.fkdot[0] = uvar.fStart;
/*fill in maxBinaryParams*/
XLALGPSSetREAL8( &maxBinaryTemplate.tp, uvar.orbitTimeAsc + uvar.orbitTimeAscBand);
maxBinaryTemplate.argp = 0.0;
maxBinaryTemplate.asini = uvar.orbitAsiniSec + uvar.orbitAsiniSecBand;
maxBinaryTemplate.ecc = 0.0;
maxBinaryTemplate.period = uvar.orbitPSec;
maxBinaryTemplate.fkdot[0] = uvar.fStart + uvar.fBand;
/*fill in thisBinaryTemplate*/
XLALGPSSetREAL8( &thisBinaryTemplate.tp, uvar.orbitTimeAsc + 0.5 * uvar.orbitTimeAscBand);
thisBinaryTemplate.argp = 0.0;
thisBinaryTemplate.asini = 0.5*(minBinaryTemplate.asini + maxBinaryTemplate.asini);
thisBinaryTemplate.ecc = 0.0;
thisBinaryTemplate.period =0.5*(minBinaryTemplate.period + maxBinaryTemplate.period);
thisBinaryTemplate.fkdot[0]=0.5*(minBinaryTemplate.fkdot[0] + maxBinaryTemplate.fkdot[0]);
/*Get metric diagonal components, also estimate sensitivity i.e. E[rho]/(h0)^2 (4.13)*/
if ( (XLALCalculateLMXBCrossCorrDiagMetric(&estSens, &diagff, &diagaa, &diagTT, thisBinaryTemplate, GammaAve, sftPairs, sftIndices, inputSFTs, multiWeights /*, kappaValues*/) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCalculateLMXBCrossCorrDiagMetric() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* spacing in frequency from diagff */ /* set spacings in new dopplerparams struct */
if (XLALUserVarWasSet(&uvar.spacingF)) /* If spacing was given by CMD line, use it, else calculate spacing by mismatch*/
binaryTemplateSpacings.fkdot[0] = uvar.spacingF;
else
binaryTemplateSpacings.fkdot[0] = sqrt(uvar.mismatchF / diagff);
if (XLALUserVarWasSet(&uvar.spacingA))
binaryTemplateSpacings.asini = uvar.spacingA;
else
binaryTemplateSpacings.asini = sqrt(uvar.mismatchA / diagaa);
/* this is annoying: tp is a GPS time while we want a difference
in time which should be just REAL8 */
if (XLALUserVarWasSet(&uvar.spacingT))
XLALGPSSetREAL8( &binaryTemplateSpacings.tp, uvar.spacingT);
else
XLALGPSSetREAL8( &binaryTemplateSpacings.tp, sqrt(uvar.mismatchT / diagTT));
if (XLALUserVarWasSet(&uvar.spacingP))
binaryTemplateSpacings.period = uvar.spacingP;
else
binaryTemplateSpacings.period = sqrt(uvar.mismatchP / diagpp);
/* metric elements for eccentric case not considered? */
UINT8 fCount = 0, aCount = 0, tCount = 0 , pCount = 0;
const UINT8 fSpacingNum = floor( uvar.fBand / binaryTemplateSpacings.fkdot[0]);
const UINT8 aSpacingNum = floor( uvar.orbitAsiniSecBand / binaryTemplateSpacings.asini);
const UINT8 tSpacingNum = floor( uvar.orbitTimeAscBand / XLALGPSGetREAL8(&binaryTemplateSpacings.tp));
const UINT8 pSpacingNum = floor( uvar.orbitPSecBand / binaryTemplateSpacings.period);
/*reset minbinaryOrbitParams to shift the first point a factor so as to make the center of all seaching points centers at the center of searching band*/
minBinaryTemplate.fkdot[0] = uvar.fStart + 0.5 * (uvar.fBand - fSpacingNum * binaryTemplateSpacings.fkdot[0]);
minBinaryTemplate.asini = uvar.orbitAsiniSec + 0.5 * (uvar.orbitAsiniSecBand - aSpacingNum * binaryTemplateSpacings.asini);
XLALGPSSetREAL8( &minBinaryTemplate.tp, uvar.orbitTimeAsc + 0.5 * (uvar.orbitTimeAscBand - tSpacingNum * XLALGPSGetREAL8(&binaryTemplateSpacings.tp)));
minBinaryTemplate.period = uvar.orbitPSec + 0.5 * (uvar.orbitPSecBand - pSpacingNum * binaryTemplateSpacings.period);
/* initialize the doppler scan struct which stores the current template information */
XLALGPSSetREAL8(&dopplerpos.refTime, config.refTime);
dopplerpos.Alpha = uvar.alphaRad;
dopplerpos.Delta = uvar.deltaRad;
dopplerpos.fkdot[0] = minBinaryTemplate.fkdot[0];
/* set all spindowns to zero */
for (k=1; k < PULSAR_MAX_SPINS; k++)
dopplerpos.fkdot[k] = 0.0;
dopplerpos.asini = minBinaryTemplate.asini;
dopplerpos.period = minBinaryTemplate.period;
dopplerpos.tp = minBinaryTemplate.tp;
dopplerpos.ecc = minBinaryTemplate.ecc;
dopplerpos.argp = minBinaryTemplate.argp;
/* now set the initial values of binary parameters */
/* thisBinaryTemplate.asini = uvar.orbitAsiniSec;
thisBinaryTemplate.period = uvar.orbitPSec;
XLALGPSSetREAL8( &thisBinaryTemplate.tp, uvar.orbitTimeAsc);
thisBinaryTemplate.ecc = 0.0;
thisBinaryTemplate.argp = 0.0;*/
/* copy to dopplerpos */
/* Calculate SSB times (can do this once since search is currently only for one sky position, and binary doppler shift is added later) */
MultiSSBtimes *multiSSBTimes = NULL;
if ((multiSSBTimes = XLALGetMultiSSBtimes ( multiStates, skyPos, dopplerpos.refTime, SSBPREC_RELATIVISTICOPT )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALGetMultiSSBtimes() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* "New" general metric computation */
/* For now hard-code circular parameter space */
const DopplerCoordinateSystem coordSys = {
.dim = 4,
.coordIDs = { DOPPLERCOORD_FREQ,
DOPPLERCOORD_ASINI,
DOPPLERCOORD_TASC,
DOPPLERCOORD_PORB, },
};
REAL8VectorSequence *phaseDerivs = NULL;
if ( ( XLALCalculateCrossCorrPhaseDerivatives ( &phaseDerivs, &thisBinaryTemplate, config.edat, sftIndices, multiSSBTimes, &coordSys ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCalculateCrossCorrPhaseDerivatives() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* fill in metric and parameter offsets */
gsl_matrix *g_ij = NULL;
gsl_vector *eps_i = NULL;
REAL8 sumGammaSq = 0;
if ( ( XLALCalculateCrossCorrPhaseMetric ( &g_ij, &eps_i, &sumGammaSq, phaseDerivs, sftPairs, GammaAve, GammaCirc, &coordSys ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCalculateCrossCorrPhaseMetric() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
XLALDestroyREAL8VectorSequence ( phaseDerivs );
XLALDestroyREAL8Vector ( GammaCirc );
if ((fp = fopen("gsldata.dat","w"))==NULL){
LogPrintf ( LOG_CRITICAL, "Can't write in gsl matrix file");
XLAL_ERROR( XLAL_EFUNC );
}
XLALfprintfGSLvector(fp, "%g", eps_i);
XLALfprintfGSLmatrix(fp, "%g", g_ij);
/* Allocate structure for binary doppler-shifting information */
if ((multiBinaryTimes = XLALDuplicateMultiSSBtimes ( multiSSBTimes )) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALDuplicateMultiSSBtimes() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
UINT8 numSFTs = sftIndices->length;
if ((shiftedFreqs = XLALCreateREAL8Vector ( numSFTs ) ) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateREAL8Vector() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
if ((lowestBins = XLALCreateUINT4Vector ( numSFTs ) ) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateUINT4Vector() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
if ((expSignalPhases = XLALCreateCOMPLEX8Vector ( numSFTs ) ) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateREAL8Vector() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
if ((sincList = XLALCreateREAL8VectorSequence ( numSFTs, uvar.numBins ) ) == NULL){
LogPrintf ( LOG_CRITICAL, "%s: XLALCreateREAL8VectorSequence() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* args should be : spacings, min and max doppler params */
BOOLEAN firstPoint = TRUE; /* a boolean to help to search at the beginning point in parameter space, after the search it is set to be FALSE to end the loop*/
if ( (XLALAddMultiBinaryTimes( &multiBinaryTimes, multiSSBTimes, &dopplerpos ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALAddMultiBinaryTimes() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
} /*Need to apply additional doppler shifting before the loop, or the first point in parameter space will be lost and return a wrong SNR when fBand!=0*/
while ( GetNextCrossCorrTemplate(&dopplerShiftFlag, &firstPoint, &dopplerpos, &binaryTemplateSpacings, &minBinaryTemplate, &maxBinaryTemplate, &fCount, &aCount, &tCount, &pCount, fSpacingNum, aSpacingNum, tSpacingNum, pSpacingNum) == 0)
{
/* do useful stuff here*/
/* Apply additional Doppler shifting using current binary orbital parameters */
/* Might want to be clever about checking whether we've changed the orbital parameters or only the frequency */
if (dopplerShiftFlag == TRUE)
{
if ( (XLALAddMultiBinaryTimes( &multiBinaryTimes, multiSSBTimes, &dopplerpos ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALAddMultiBinaryTimes() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
}
if ( (XLALGetDopplerShiftedFrequencyInfo( shiftedFreqs, lowestBins, expSignalPhases, sincList, uvar.numBins, &dopplerpos, sftIndices, inputSFTs, multiBinaryTimes, Tsft ) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALGetDopplerShiftedFrequencyInfo() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
if ( (XLALCalculatePulsarCrossCorrStatistic( &ccStat, &evSquared, GammaAve, expSignalPhases, lowestBins, sincList, sftPairs, sftIndices, inputSFTs, multiWeights, uvar.numBins) != XLAL_SUCCESS ) ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALCalculatePulsarCrossCorrStatistic() failed with errno=%d\n", __func__, xlalErrno );
XLAL_ERROR( XLAL_EFUNC );
}
/* fill candidate struct and insert into toplist if necessary */
thisCandidate.freq = dopplerpos.fkdot[0];
thisCandidate.tp = XLALGPSGetREAL8( &dopplerpos.tp );
thisCandidate.argp = dopplerpos.argp;
thisCandidate.asini = dopplerpos.asini;
thisCandidate.ecc = dopplerpos.ecc;
thisCandidate.period = dopplerpos.period;
thisCandidate.rho = ccStat;
thisCandidate.evSquared = evSquared;
thisCandidate.estSens = estSens;
insert_into_crossCorrBinary_toplist(ccToplist, thisCandidate);
} /* end while loop over templates */
/* write candidates to file */
sort_crossCorrBinary_toplist( ccToplist );
/* add error checking */
final_write_crossCorrBinary_toplist_to_file( ccToplist, uvar.toplistFilename, &checksum);
REAL8 h0Sens = sqrt((10 / sqrt(estSens))); /*for a SNR=10 signal, the h0 we can detect*/
XLALGPSTimeNow (&computingEndGPSTime); /*record the rough end time*/
UINT4 computingTime = computingEndGPSTime.gpsSeconds - computingStartGPSTime.gpsSeconds;
/* make a meta-data file*/
if(XLALUserVarWasSet(&uvar.logFilename)){
CHAR *CMDInputStr = XLALUserVarGetLog ( UVAR_LOGFMT_CFGFILE );
if ((fp = fopen(uvar.logFilename,"w"))==NULL){
LogPrintf ( LOG_CRITICAL, "Can't write in logfile");
XLAL_ERROR( XLAL_EFUNC );
}
fprintf(fp, "[UserInput]\n\n");
fprintf(fp, "%s\n", CMDInputStr);
fprintf(fp, "[CalculatedValues]\n\n");
fprintf(fp, "g_ff = %.9f\n", diagff );
fprintf(fp, "g_aa = %.9f\n", diagaa );
fprintf(fp, "g_TT = %.9f\n", diagTT );
fprintf(fp, "FSpacing = %.9g\n", binaryTemplateSpacings.fkdot[0]);
fprintf(fp, "ASpacing = %.9g\n", binaryTemplateSpacings.asini);
fprintf(fp, "TSpacing = %.9g\n", XLALGPSGetREAL8(&binaryTemplateSpacings.tp));
/* fprintf(fp, "PSpacing = %.9g\n", binaryTemplateSpacings.period );*/
fprintf(fp, "TemplatenumF = %" LAL_UINT8_FORMAT "\n", (fSpacingNum + 1));
fprintf(fp, "TemplatenumA = %" LAL_UINT8_FORMAT "\n", (aSpacingNum + 1));
fprintf(fp, "TemplatenumT = %" LAL_UINT8_FORMAT "\n", (tSpacingNum + 1));
fprintf(fp, "TemplatenumP = %" LAL_UINT8_FORMAT "\n", (pSpacingNum + 1));
fprintf(fp, "TemplatenumTotal = %" LAL_UINT8_FORMAT "\n",(fSpacingNum + 1) * (aSpacingNum + 1) * (tSpacingNum + 1) * (pSpacingNum + 1));
fprintf(fp, "Sens = %.9g\n", estSens);/*(E[rho]/h0^2)^2*/
fprintf(fp, "h0_min_SNR10 = %.9g\n", h0Sens);/*for rho = 10 in our pipeline*/
fprintf(fp, "startTime = %" LAL_INT4_FORMAT "\n", computingStartGPSTime.gpsSeconds );/*start time in GPS-time*/
fprintf(fp, "endTime = %" LAL_INT4_FORMAT "\n", computingEndGPSTime.gpsSeconds );/*end time in GPS-time*/
fprintf(fp, "computingTime = %" LAL_UINT4_FORMAT "\n", computingTime );/*total time in sec*/
fprintf(fp, "SFTnum = %" LAL_UINT4_FORMAT "\n", sftIndices->length);/*total number of SFT*/
fprintf(fp, "pairnum = %" LAL_UINT4_FORMAT "\n", sftPairs->length);/*total number of pair of SFT*/
fprintf(fp, "Tsft = %.6g\n", Tsft);/*SFT duration*/
fprintf(fp, "\n[Version]\n\n");
fprintf(fp, "%s", VCSInfoString);
fclose(fp);
XLALFree(CMDInputStr);
}
XLALFree(VCSInfoString);
XLALDestroyCOMPLEX8Vector ( expSignalPhases );
XLALDestroyUINT4Vector ( lowestBins );
XLALDestroyREAL8Vector ( shiftedFreqs );
XLALDestroyREAL8VectorSequence ( sincList );
XLALDestroyMultiSSBtimes ( multiBinaryTimes );
XLALDestroyMultiSSBtimes ( multiSSBTimes );
XLALDestroyREAL8Vector ( GammaAve );
XLALDestroySFTPairIndexList( sftPairs );
XLALDestroySFTIndexList( sftIndices );
XLALDestroyMultiAMCoeffs ( multiCoeffs );
XLALDestroyMultiDetectorStateSeries ( multiStates );
XLALDestroyMultiTimestamps ( multiTimes );
XLALDestroyMultiNoiseWeights ( multiWeights );
XLALDestroyMultiPSDVector ( multiPSDs );
XLALDestroyMultiSFTVector ( inputSFTs );
/* de-allocate memory for configuration variables */
XLALDestroyConfigVars ( &config );
/* de-allocate memory for user input variables */
XLALDestroyUserVars();
/* free toplist memory */
free_crossCorr_toplist(&ccToplist);
/* check memory leaks if we forgot to de-allocate anything */
LALCheckMemoryLeaks();
LogPrintf (LOG_CRITICAL, "End time\n");/*for debug convenience to record calculating time*/
return 0;
} /* main */
/* initialize and register user variables */
int XLALInitUserVars (UserInput_t *uvar)
{
/* initialize with some defaults */
uvar->help = FALSE;
uvar->maxLag = 0.0;
uvar->inclAutoCorr = FALSE;
uvar->fStart = 100.0;
uvar->fBand = 0.1;
/* uvar->fdotStart = 0.0; */
/* uvar->fdotBand = 0.0; */
uvar->alphaRad = 0.0;
uvar->deltaRad = 0.0;
uvar->refTime = 0.0;
uvar->rngMedBlock = 50;
uvar->numBins = 1;
/* zero binary orbital parameters means not a binary */
uvar->orbitAsiniSec = 0.0;
uvar->orbitAsiniSecBand = 0.0;
uvar->orbitPSec = 0.0;
uvar->orbitPSecBand = 0.0;
uvar->orbitTimeAsc = 0;
uvar->orbitTimeAscBand = 0;
/*default mismatch values */
/* set to 0.1 by default -- for no real reason */
/* make 0.1 a macro? */
uvar->mismatchF = 0.1;
uvar->mismatchA = 0.1;
uvar->mismatchT = 0.1;
uvar->mismatchP = 0.1;
uvar->ephemEarth = XLALStringDuplicate("earth00-19-DE405.dat.gz");
uvar->ephemSun = XLALStringDuplicate("sun00-19-DE405.dat.gz");
uvar->sftLocation = XLALCalloc(1, MAXFILENAMELENGTH+1);
/* initialize number of candidates in toplist -- default is just to return the single best candidate */
uvar->numCand = 1;
uvar->toplistFilename = XLALStringDuplicate("toplist_crosscorr.dat");
uvar->version = FALSE;
/* register user-variables */
XLALregBOOLUserStruct ( help, 'h', UVAR_HELP, "Print this message");
XLALregINTUserStruct ( startTime, 0, UVAR_REQUIRED, "Desired start time of analysis in GPS seconds");
XLALregINTUserStruct ( endTime, 0, UVAR_REQUIRED, "Desired end time of analysis in GPS seconds");
XLALregREALUserStruct ( maxLag, 0, UVAR_OPTIONAL, "Maximum lag time in seconds between SFTs in correlation");
XLALregBOOLUserStruct ( inclAutoCorr, 0, UVAR_OPTIONAL, "Include auto-correlation terms (an SFT with itself)");
XLALregREALUserStruct ( fStart, 0, UVAR_OPTIONAL, "Start frequency in Hz");
XLALregREALUserStruct ( fBand, 0, UVAR_OPTIONAL, "Frequency band to search over in Hz ");
/* XLALregREALUserStruct ( fdotStart, 0, UVAR_OPTIONAL, "Start value of spindown in Hz/s"); */
/* XLALregREALUserStruct ( fdotBand, 0, UVAR_OPTIONAL, "Band for spindown values in Hz/s"); */
XLALregREALUserStruct ( alphaRad, 0, UVAR_OPTIONAL, "Right ascension for directed search (radians)");
XLALregREALUserStruct ( deltaRad, 0, UVAR_OPTIONAL, "Declination for directed search (radians)");
XLALregREALUserStruct ( refTime, 0, UVAR_OPTIONAL, "SSB reference time for pulsar-parameters [Default: midPoint]");
XLALregREALUserStruct ( orbitAsiniSec, 0, UVAR_OPTIONAL, "Start of search band for projected semimajor axis (seconds) [0 means not a binary]");
XLALregREALUserStruct ( orbitAsiniSecBand, 0, UVAR_OPTIONAL, "Width of search band for projected semimajor axis (seconds)");
XLALregREALUserStruct ( orbitPSec, 0, UVAR_OPTIONAL, "Binary orbital period (seconds) [0 means not a binary]");
XLALregREALUserStruct ( orbitPSecBand, 0, UVAR_OPTIONAL, "Band for binary orbital period (seconds) ");
XLALregREALUserStruct ( orbitTimeAsc, 0, UVAR_OPTIONAL, "Start of orbital time-of-ascension band in GPS seconds");
XLALregREALUserStruct ( orbitTimeAscBand, 0, UVAR_OPTIONAL, "Width of orbital time-of-ascension band (seconds)");
XLALregSTRINGUserStruct( ephemEarth, 0, UVAR_OPTIONAL, "Earth ephemeris file to use");
XLALregSTRINGUserStruct( ephemSun, 0, UVAR_OPTIONAL, "Sun ephemeris file to use");
XLALregSTRINGUserStruct( sftLocation, 0, UVAR_REQUIRED, "Filename pattern for locating SFT data");
XLALregINTUserStruct ( rngMedBlock, 0, UVAR_OPTIONAL, "Running median block size for PSD estimation");
XLALregINTUserStruct ( numBins, 0, UVAR_OPTIONAL, "Number of frequency bins to include in calculation");
XLALregREALUserStruct ( mismatchF, 0, UVAR_OPTIONAL, "Desired mismatch for frequency spacing");
XLALregREALUserStruct ( mismatchA, 0, UVAR_OPTIONAL, "Desired mismatch for asini spacing");
XLALregREALUserStruct ( mismatchT, 0, UVAR_OPTIONAL, "Desired mismatch for periapse passage time spacing");
XLALregREALUserStruct ( mismatchP, 0, UVAR_OPTIONAL, "Desired mismatch for period spacing");
XLALregREALUserStruct ( spacingF, 0, UVAR_OPTIONAL, "Desired frequency spacing");
XLALregREALUserStruct ( spacingA, 0, UVAR_OPTIONAL, "Desired asini spacing");
XLALregREALUserStruct ( spacingT, 0, UVAR_OPTIONAL, "Desired periapse passage time spacing");
XLALregREALUserStruct ( spacingP, 0, UVAR_OPTIONAL, "Desired period spacing");
XLALregINTUserStruct ( numCand, 0, UVAR_OPTIONAL, "Number of candidates to keep in toplist");
XLALregSTRINGUserStruct( pairListInputFilename, 0, UVAR_OPTIONAL, "Name of file from which to read list of SFT pairs");
XLALregSTRINGUserStruct( pairListOutputFilename, 0, UVAR_OPTIONAL, "Name of file to which to write list of SFT pairs");
XLALregSTRINGUserStruct( sftListOutputFilename, 0, UVAR_OPTIONAL, "Name of file to which to write list of SFTs (for sanity checks)");
XLALregSTRINGUserStruct( sftListInputFilename, 0, UVAR_OPTIONAL, "Name of file to which to read in list of SFTs (for sanity checks)");
XLALregSTRINGUserStruct( gammaAveOutputFilename, 0, UVAR_OPTIONAL, "Name of file to which to write aa+bb weights (for e.g., false alarm estimation)");
XLALregSTRINGUserStruct( gammaCircOutputFilename, 0, UVAR_OPTIONAL, "Name of file to which to write ab-ba weights (for e.g., systematic error)");
XLALregSTRINGUserStruct( toplistFilename, 0, UVAR_OPTIONAL, "Output filename containing candidates in toplist");
XLALregSTRINGUserStruct( logFilename, 0, UVAR_OPTIONAL, "Output a meta-data file for the search");
XLALregBOOLUserStruct ( version, 'V', UVAR_SPECIAL, "Output version(VCS) information");
if ( xlalErrno ) {
XLALPrintError ("%s: user variable initialization failed with errno = %d.\n", __func__, xlalErrno );
XLAL_ERROR ( XLAL_EFUNC );
}
return XLAL_SUCCESS;
}
/**
* MAIN function
* Generates samples of B-stat and F-stat according to their pdfs for given signal-params.
*/
int main(int argc,char *argv[])
{
UserInput_t XLAL_INIT_DECL(uvar);
ConfigVariables XLAL_INIT_DECL(cfg);
vrbflg = 1; /* verbose error-messages */
/* turn off default GSL error handler */
gsl_set_error_handler_off ();
/* ----- register and read all user-variables ----- */
if ( XLALInitUserVars( &uvar ) != XLAL_SUCCESS ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALInitUserVars() failed with errno=%d\n", __func__, xlalErrno );
return 1;
}
/* do ALL cmdline and cfgfile handling */
BOOLEAN should_exit = 0;
if ( XLALUserVarReadAllInput ( &should_exit, argc, argv ) != XLAL_SUCCESS ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALUserVarReadAllInput() failed with errno=%d\n", __func__, xlalErrno );
return 1;
}
if ( should_exit )
return EXIT_FAILURE;
if ( uvar.version ) {
/* output verbose VCS version string if requested */
CHAR *vcs;
if ( (vcs = XLALGetVersionString (lalDebugLevel)) == NULL ) {
LogPrintf ( LOG_CRITICAL, "%s:XLALGetVersionString(%d) failed with errno=%d.\n", __func__, lalDebugLevel, xlalErrno );
return 1;
}
printf ( "%s\n", vcs );
XLALFree ( vcs );
return 0;
}
/* ---------- Initialize code-setup ---------- */
if ( XLALInitCode( &cfg, &uvar ) != XLAL_SUCCESS ) {
LogPrintf (LOG_CRITICAL, "%s: XLALInitCode() failed with error = %d\n", __func__, xlalErrno );
XLAL_ERROR ( XLAL_EFUNC );
}
/* compare IFO name for line injection with IFO list, find the corresponding index, or throw an error if not found */
UINT4 numDetectors = cfg.multiDetStates->length;
INT4 lineX = -1;
if ( uvar.lineIFO ) {
for ( UINT4 X=0; X < numDetectors; X++ ) {
if ( strcmp( uvar.lineIFO, uvar.IFOs->data[X] ) == 0 )
lineX = X;
}
if ( lineX == -1 ) {
XLALPrintError ("\nError in function %s, line %d : Could not match detector ID \"%s\" for line injection to any detector.\n\n", __func__, __LINE__, uvar.lineIFO);
XLAL_ERROR ( XLAL_EFAILED );
}
}
/* ----- prepare stats output ----- */
FILE *fpStats = NULL;
if ( uvar.outputStats )
{
if ( (fpStats = fopen (uvar.outputStats, "wb")) == NULL)
{
LogPrintf (LOG_CRITICAL, "Error opening file '%s' for writing..\n\n", uvar.outputStats );
XLAL_ERROR ( XLAL_EIO );
}
fprintf (fpStats, "%s", cfg.logString ); /* write search log comment */
if ( write_BSGL_candidate_to_fp ( fpStats, NULL, uvar.IFOs, NULL, uvar.computeBSGL ) != XLAL_SUCCESS ) { /* write header-line comment */
XLAL_ERROR ( XLAL_EFUNC );
}
} /* if outputStats */
/* ----- prepare injection params output ----- */
FILE *fpInjParams = NULL;
if ( uvar.outputInjParams )
{
if ( (fpInjParams = fopen (uvar.outputInjParams, "wb")) == NULL)
{
LogPrintf (LOG_CRITICAL, "Error opening file '%s' for writing..\n\n", uvar.outputInjParams );
XLAL_ERROR ( XLAL_EIO );
}
fprintf (fpInjParams, "%s", cfg.logString ); /* write search log comment */
if ( write_InjParams_to_fp ( fpInjParams, NULL, 0, uvar.outputMmunuX, numDetectors ) != XLAL_SUCCESS ) { /* write header-line comment */
XLAL_ERROR ( XLAL_EFUNC );
}
} /* if outputInjParams */
multiAMBuffer_t XLAL_INIT_DECL(multiAMBuffer); /* prepare AM-buffer */
/* ----- prepare BSGL computation */
BSGLSetup *BSGLsetup = NULL;
if ( uvar.computeBSGL )
{
BOOLEAN useLogCorrection = TRUE;
REAL4 *oLGX_p = NULL;
REAL4 oLGX[PULSAR_MAX_DETECTORS];
if ( uvar.oLGX != NULL )
{
XLAL_CHECK ( uvar.oLGX->length == numDetectors, XLAL_EINVAL, "Invalid input: length(oLGX) = %d differs from number of detectors (%d)'\n", uvar.oLGX->length, numDetectors );
XLAL_CHECK ( XLALParseLinePriors ( &oLGX[0], uvar.oLGX ) == XLAL_SUCCESS, XLAL_EFUNC );
oLGX_p = &oLGX[0];
}
XLAL_CHECK ( ( BSGLsetup = XLALCreateBSGLSetup ( numDetectors, uvar.Fstar0, oLGX_p, useLogCorrection ) ) != NULL, XLAL_EFUNC );
} // if computeBSGL
/* ----- main MC loop over numDraws trials ---------- */
INT4 i;
for ( i=0; i < uvar.numDraws; i ++ )
{
InjParams_t XLAL_INIT_DECL(injParamsDrawn);
/* ----- generate signal random draws from ranges and generate Fstat atoms */
MultiFstatAtomVector *multiAtoms;
multiAtoms = XLALSynthesizeTransientAtoms ( &injParamsDrawn, cfg.skypos, cfg.AmpPrior, cfg.transientInjectRange, cfg.multiDetStates, cfg.SignalOnly, &multiAMBuffer, cfg.rng, lineX, cfg.multiNoiseWeights );
XLAL_CHECK ( multiAtoms != NULL, XLAL_EFUNC );
/* ----- if requested, output signal injection parameters into file */
if ( fpInjParams && (write_InjParams_to_fp ( fpInjParams, &injParamsDrawn, uvar.dataStartGPS, uvar.outputMmunuX, numDetectors ) != XLAL_SUCCESS ) ) {
XLAL_ERROR ( XLAL_EFUNC );
} /* if fpInjParams & failure*/
/* initialise BSGLComponents structure and allocate memory */
BSGLComponents XLAL_INIT_DECL(synthStats); /* struct containing multi-detector Fstat, single-detector Fstats, line-robust stat */
synthStats.numDetectors = numDetectors;
/* compute F- and BSGListics from atoms */
UINT4 X;
for ( X=0; X < numDetectors; X++ ) {
synthStats.TwoFX[X] = XLALComputeFstatFromAtoms ( multiAtoms, X );
if ( xlalErrno != 0 ) {
XLALPrintError ("\nError in function %s, line %d : Failed call to XLALComputeFstatFromAtoms().\n\n", __func__, __LINE__);
XLAL_ERROR ( XLAL_EFUNC );
}
}
synthStats.TwoF = XLALComputeFstatFromAtoms ( multiAtoms, -1 );
if ( xlalErrno != 0 ) {
XLALPrintError ("\nError in function %s, line %d : Failed call to XLALComputeFstatFromAtoms().\n\n", __func__, __LINE__);
XLAL_ERROR ( XLAL_EFUNC );
}
if ( uvar.computeBSGL ) {
synthStats.log10BSGL = XLALComputeBSGL ( synthStats.TwoF, synthStats.TwoFX, BSGLsetup );
XLAL_CHECK ( xlalErrno == 0, XLAL_EFUNC, "XLALComputeBSGL() failed with xlalErrno = %d\n", xlalErrno );
}
/* ----- if requested, output atoms-vector into file */
if ( uvar.outputAtoms )
{
FILE *fpAtoms;
char *fnameAtoms;
UINT4 len = strlen ( uvar.outputAtoms ) + 20;
if ( (fnameAtoms = XLALCalloc ( 1, len )) == NULL ) {
XLALPrintError ("%s: failed to XLALCalloc ( 1, %d )\n", __func__, len );
XLAL_ERROR ( XLAL_EFUNC );
}
sprintf ( fnameAtoms, "%s_%04d_of_%04d.dat", uvar.outputAtoms, i + 1, uvar.numDraws );
if ( ( fpAtoms = fopen ( fnameAtoms, "wb" )) == NULL ) {
XLALPrintError ("%s: failed to open atoms-output file '%s' for writing.\n", __func__, fnameAtoms );
XLAL_ERROR ( XLAL_EFUNC );
}
fprintf ( fpAtoms, "%s", cfg.logString ); /* output header info */
if ( write_MultiFstatAtoms_to_fp ( fpAtoms, multiAtoms ) != XLAL_SUCCESS ) {
XLALPrintError ("%s: failed to write atoms to output file '%s'. xlalErrno = %d\n", __func__, fnameAtoms, xlalErrno );
XLAL_ERROR ( XLAL_EFUNC );
}
XLALFree ( fnameAtoms );
fclose (fpAtoms);
} /* if outputAtoms */
/* ----- if requested, output transient-cand statistics */
if ( fpStats && write_BSGL_candidate_to_fp ( fpStats, &synthStats, uvar.IFOs, &injParamsDrawn, uvar.computeBSGL ) != XLAL_SUCCESS ) {
XLALPrintError ( "%s: write_transientCandidate_to_fp() failed.\n", __func__ );
XLAL_ERROR ( XLAL_EFUNC );
}
/* ----- free Memory */
XLALDestroyMultiFstatAtomVector ( multiAtoms );
} /* for i < numDraws */
/* ----- close files ----- */
if ( fpStats ) fclose ( fpStats );
if ( fpInjParams ) fclose ( fpInjParams );
/* ----- free memory ---------- */
XLALDestroyMultiDetectorStateSeries ( cfg.multiDetStates );
XLALDestroyMultiNoiseWeights ( cfg.multiNoiseWeights );
XLALDestroyExpLUT();
XLALDestroyMultiAMCoeffs ( multiAMBuffer.multiAM );
/* ----- free amplitude prior pdfs ----- */
XLALDestroyPDF1D ( cfg.AmpPrior.pdf_h0Nat );
XLALDestroyPDF1D ( cfg.AmpPrior.pdf_cosi );
XLALDestroyPDF1D ( cfg.AmpPrior.pdf_psi );
XLALDestroyPDF1D ( cfg.AmpPrior.pdf_phi0 );
XLALFree ( BSGLsetup );
BSGLsetup = NULL;
if ( cfg.logString ) {
XLALFree ( cfg.logString );
}
gsl_rng_free ( cfg.rng );
XLALDestroyUserVars();
/* did we forget anything ? (doesn't cover gsl-memory!) */
LALCheckMemoryLeaks();
return 0;
} /* main() */
/**
* MAIN function
* Generates samples of B-stat and F-stat according to their pdfs for given signal-params.
*/
int main(int argc,char *argv[])
{
UserInput_t XLAL_INIT_DECL(uvar);
ConfigVariables XLAL_INIT_DECL(cfg); /**< various derived configuration settings */
vrbflg = 1; /* verbose error-messages */
LogSetLevel(lalDebugLevel);
/* turn off default GSL error handler */
gsl_set_error_handler_off ();
/* ----- register and read all user-variables ----- */
LogSetLevel(lalDebugLevel);
if ( XLALInitUserVars( &uvar ) != XLAL_SUCCESS ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALInitUserVars() failed with errno=%d\n", __func__, xlalErrno );
return 1;
}
/* do ALL cmdline and cfgfile handling */
if ( XLALUserVarReadAllInput ( argc, argv ) != XLAL_SUCCESS ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALUserVarReadAllInput() failed with errno=%d\n", __func__, xlalErrno );
return 1;
}
if (uvar.help) /* if help was requested, we're done here */
return 0;
if ( uvar.version ) {
/* output verbose VCS version string if requested */
CHAR *vcs;
if ( (vcs = XLALGetVersionString (lalDebugLevel)) == NULL ) {
LogPrintf ( LOG_CRITICAL, "%s:XLALGetVersionString(%d) failed with errno=%d.\n", __func__, lalDebugLevel, xlalErrno );
return 1;
}
printf ( "%s\n", vcs );
XLALFree ( vcs );
return 0;
}
/* ---------- Initialize code-setup ---------- */
if ( XLALInitCode( &cfg, &uvar ) != XLAL_SUCCESS ) {
LogPrintf (LOG_CRITICAL, "%s: XLALInitCode() failed with error = %d\n", __func__, xlalErrno );
XLAL_ERROR ( XLAL_EFUNC );
}
/* ----- prepare stats output ----- */
FILE *fpTransientStats = NULL;
if ( uvar.outputStats )
{
if ( (fpTransientStats = fopen (uvar.outputStats, "wb")) == NULL)
{
LogPrintf (LOG_CRITICAL, "Error opening file '%s' for writing..\n\n", uvar.outputStats );
XLAL_ERROR ( XLAL_EIO );
}
fprintf (fpTransientStats, "%s", cfg.logString ); /* write search log comment */
if ( write_transientCandidate_to_fp ( fpTransientStats, NULL ) != XLAL_SUCCESS ) { /* write header-line comment */
XLAL_ERROR ( XLAL_EFUNC );
}
} /* if outputStats */
/* ----- prepare injection params output ----- */
FILE *fpInjParams = NULL;
if ( uvar.outputInjParams )
{
if ( (fpInjParams = fopen (uvar.outputInjParams, "wb")) == NULL)
{
LogPrintf (LOG_CRITICAL, "Error opening file '%s' for writing..\n\n", uvar.outputInjParams );
XLAL_ERROR ( XLAL_EIO );
}
fprintf (fpInjParams, "%s", cfg.logString ); /* write search log comment */
if ( write_InjParams_to_fp ( fpInjParams, NULL, 0, 0, 0 ) != XLAL_SUCCESS ) { /* write header-line comment - options outputMmunuX and numDetectors not supported here, so pass defaults to deactivate them */
XLAL_ERROR ( XLAL_EFUNC );
}
} /* if outputInjParams */
/* ----- main MC loop over numDraws trials ---------- */
multiAMBuffer_t XLAL_INIT_DECL(multiAMBuffer); /* prepare AM-buffer */
INT4 i;
for ( i=0; i < uvar.numDraws; i ++ )
{
InjParams_t XLAL_INIT_DECL(injParamsDrawn);
/* ----- generate signal random draws from ranges and generate Fstat atoms */
MultiFstatAtomVector *multiAtoms;
multiAtoms = XLALSynthesizeTransientAtoms ( &injParamsDrawn, cfg.skypos, cfg.AmpPrior, cfg.transientInjectRange, cfg.multiDetStates, cfg.SignalOnly, &multiAMBuffer, cfg.rng, -1, NULL ); // options lineX and noise_weights not supported here, so pass defaults to deactivate them
if ( multiAtoms ==NULL ) {
LogPrintf ( LOG_CRITICAL, "%s: XLALSynthesizeTransientAtoms() failed with xlalErrno = %d\n", __func__, xlalErrno );
XLAL_ERROR ( XLAL_EFUNC );
}
/* ----- if requested, output signal injection parameters into file */
if ( fpInjParams && (write_InjParams_to_fp ( fpInjParams, &injParamsDrawn, uvar.dataStartGPS, 0, 0 ) ) != XLAL_SUCCESS ) { // options outputMmunuX and numDetectors not supported here, so pass defaults to deactivate them
XLAL_ERROR ( XLAL_EFUNC );
} /* if fpInjParams & failure*/
/* ----- add meta-info on current transient-CW candidate */
transientCandidate_t XLAL_INIT_DECL(cand);
cand.doppler.Alpha = multiAMBuffer.skypos.longitude;
cand.doppler.Delta = multiAMBuffer.skypos.latitude;
cand.windowRange = cfg.transientSearchRange;
/* ----- if needed: compute transient-Bstat search statistic on these atoms */
if ( fpTransientStats || uvar.outputFstatMap || uvar.outputPosteriors )
{
/* compute Fstat map F_mn over {t0, tau} */
if ( (cand.FstatMap = XLALComputeTransientFstatMap ( multiAtoms, cand.windowRange, uvar.useFReg)) == NULL ) {
XLALPrintError ("%s: XLALComputeTransientFstatMap() failed with xlalErrno = %d.\n", __func__, xlalErrno );
XLAL_ERROR ( XLAL_EFUNC );
}
} /* if we'll need the Fstat-map F_mn */
/* ----- if requested compute marginalized Bayes factor */
if ( fpTransientStats )
{
cand.logBstat = XLALComputeTransientBstat ( cand.windowRange, cand.FstatMap );
UINT4 err = xlalErrno;
if ( err ) {
XLALPrintError ("%s: XLALComputeTransientBstat() failed with xlalErrno = %d\n", __func__, err );
XLAL_ERROR ( XLAL_EFUNC );
}
if ( uvar.SignalOnly )
{
cand.FstatMap->maxF += 2;
cand.logBstat += 2;
}
} /* if Bstat requested */
/* ----- if requested, compute parameter posteriors for {t0, tau} */
pdf1D_t *pdf_t0 = NULL;
pdf1D_t *pdf_tau = NULL;
if ( fpTransientStats || uvar.outputPosteriors )
{
if ( (pdf_t0 = XLALComputeTransientPosterior_t0 ( cand.windowRange, cand.FstatMap )) == NULL ) {
XLALPrintError ("%s: failed to compute t0-posterior\n", __func__ );
XLAL_ERROR ( XLAL_EFUNC );
}
if ( (pdf_tau = XLALComputeTransientPosterior_tau ( cand.windowRange, cand.FstatMap )) == NULL ) {
XLALPrintError ("%s: failed to compute tau-posterior\n", __func__ );
XLAL_ERROR ( XLAL_EFUNC );
}
/* get maximum-posterior estimate (MP) from the modes of these pdfs */
cand.t0_MP = XLALFindModeOfPDF1D ( pdf_t0 );
if ( xlalErrno ) {
XLALPrintError ("%s: mode-estimation failed for pdf_t0. xlalErrno = %d\n", __func__, xlalErrno );
XLAL_ERROR ( XLAL_EFUNC );
}
cand.tau_MP = XLALFindModeOfPDF1D ( pdf_tau );
if ( xlalErrno ) {
XLALPrintError ("%s: mode-estimation failed for pdf_tau. xlalErrno = %d\n", __func__, xlalErrno );
XLAL_ERROR ( XLAL_EFUNC );
}
} // if posteriors required
/* ----- if requested, compute Ftotal over full data-span */
if ( uvar.computeFtotal )
{
transientFstatMap_t *FtotalMap;
/* prepare special window to cover all the data with one F-stat calculation == Ftotal */
transientWindowRange_t XLAL_INIT_DECL(winRangeAll);
winRangeAll.type = TRANSIENT_NONE;
BOOLEAN useFReg = false;
if ( (FtotalMap = XLALComputeTransientFstatMap ( multiAtoms, winRangeAll, useFReg)) == NULL ) {
XLALPrintError ("%s: XLALComputeTransientFstatMap() failed with xlalErrno = %d.\n", __func__, xlalErrno );
XLAL_ERROR ( XLAL_EFUNC );
}
/* we only use twoFtotal = 2 * maxF from this single-Fstat calculation */
REAL8 twoFtotal = 2.0 * FtotalMap->maxF;
if ( uvar.SignalOnly )
twoFtotal += 4;
/* ugly hack: lacking a good container for twoFtotal, we borrow fkdot[3] for this here ;) [only used for paper-MCs] */
cand.doppler.fkdot[3] = twoFtotal;
/* good riddance .. */
XLALDestroyTransientFstatMap ( FtotalMap );
} /* if computeFtotal */
/* ----- if requested, output atoms-vector into file */
if ( uvar.outputAtoms )
{
FILE *fpAtoms;
char *fnameAtoms;
UINT4 len = strlen ( uvar.outputAtoms ) + 20;
if ( (fnameAtoms = XLALCalloc ( 1, len )) == NULL ) {
XLALPrintError ("%s: failed to XLALCalloc ( 1, %d )\n", __func__, len );
XLAL_ERROR ( XLAL_EFUNC );
}
sprintf ( fnameAtoms, "%s_%04d_of_%04d.dat", uvar.outputAtoms, i + 1, uvar.numDraws );
if ( ( fpAtoms = fopen ( fnameAtoms, "wb" )) == NULL ) {
XLALPrintError ("%s: failed to open atoms-output file '%s' for writing.\n", __func__, fnameAtoms );
XLAL_ERROR ( XLAL_EFUNC );
}
fprintf ( fpAtoms, "%s", cfg.logString ); /* output header info */
if ( write_MultiFstatAtoms_to_fp ( fpAtoms, multiAtoms ) != XLAL_SUCCESS ) {
XLALPrintError ("%s: failed to write atoms to output file '%s'. xlalErrno = %d\n", __func__, fnameAtoms, xlalErrno );
XLAL_ERROR ( XLAL_EFUNC );
}
XLALFree ( fnameAtoms );
fclose (fpAtoms);
} /* if outputAtoms */
/* ----- if requested, output Fstat-map over {t0, tau} */
if ( uvar.outputFstatMap )
{
FILE *fpFstatMap;
char *fnameFstatMap;
UINT4 len = strlen ( uvar.outputFstatMap ) + 20;
if ( (fnameFstatMap = XLALCalloc ( 1, len )) == NULL ) {
XLALPrintError ("%s: failed to XLALCalloc ( 1, %d )\n", __func__, len );
XLAL_ERROR ( XLAL_EFUNC );
}
sprintf ( fnameFstatMap, "%s_%04d_of_%04d.dat", uvar.outputFstatMap, i + 1, uvar.numDraws );
if ( ( fpFstatMap = fopen ( fnameFstatMap, "wb" )) == NULL ) {
XLALPrintError ("%s: failed to open Fstat-map output file '%s' for writing.\n", __func__, fnameFstatMap );
XLAL_ERROR ( XLAL_EFUNC );
}
fprintf ( fpFstatMap, "%s", cfg.logString ); /* output header info */
fprintf (fpFstatMap, "\nFstat_mn = \\\n" );
if ( XLALfprintfGSLmatrix ( fpFstatMap, "%.9g", cand.FstatMap->F_mn ) != XLAL_SUCCESS ) {
XLALPrintError ("%s: XLALfprintfGSLmatrix() failed.\n", __func__ );
XLAL_ERROR ( XLAL_EFUNC );
}
XLALFree ( fnameFstatMap );
fclose (fpFstatMap);
} /* if outputFstatMap */
/* ----- if requested, output posterior pdfs on transient params {t0, tau} into a file */
if ( uvar.outputPosteriors )
{
FILE *fpPosteriors;
char *fnamePosteriors;
UINT4 len = strlen ( uvar.outputPosteriors ) + 20;
if ( (fnamePosteriors = XLALCalloc ( 1, len )) == NULL ) {
XLALPrintError ("%s: failed to XLALCalloc ( 1, %d )\n", __func__, len );
XLAL_ERROR ( XLAL_EFUNC );
}
sprintf ( fnamePosteriors, "%s_%04d_of_%04d.dat", uvar.outputPosteriors, i + 1, uvar.numDraws );
if ( ( fpPosteriors = fopen ( fnamePosteriors, "wb" )) == NULL ) {
XLALPrintError ("%s: failed to open posteriors-output file '%s' for writing.\n", __func__, fnamePosteriors );
XLAL_ERROR ( XLAL_EFUNC );
}
fprintf ( fpPosteriors, "%s", cfg.logString ); /* output header info */
/* write them to file, using pdf-method */
if ( XLALOutputPDF1D_to_fp ( fpPosteriors, pdf_t0, "pdf_t0" ) != XLAL_SUCCESS ) {
XLALPrintError ("%s: failed to output t0-posterior to file '%s'.\n", __func__, fnamePosteriors );
XLAL_ERROR ( XLAL_EFUNC );
}
if ( XLALOutputPDF1D_to_fp ( fpPosteriors, pdf_tau, "pdf_tau" ) != XLAL_SUCCESS ) {
XLALPrintError ("%s: failed to output tau-posterior to file '%s'.\n", __func__, fnamePosteriors );
XLAL_ERROR ( XLAL_EFUNC );
}
/* free mem, close file */
XLALFree ( fnamePosteriors );
fclose (fpPosteriors);
} /* if outputPosteriors */
/* ----- if requested, output transient-cand statistics */
if ( fpTransientStats && write_transientCandidate_to_fp ( fpTransientStats, &cand ) != XLAL_SUCCESS ) {
XLALPrintError ( "%s: write_transientCandidate_to_fp() failed.\n", __func__ );
XLAL_ERROR ( XLAL_EFUNC );
}
/* ----- free Memory */
XLALDestroyTransientFstatMap ( cand.FstatMap );
XLALDestroyMultiFstatAtomVector ( multiAtoms );
XLALDestroyPDF1D ( pdf_t0 );
XLALDestroyPDF1D ( pdf_tau );
} /* for i < numDraws */
/* ----- close files ----- */
if ( fpTransientStats) fclose ( fpTransientStats );
if ( fpInjParams ) fclose ( fpInjParams );
/* ----- free memory ---------- */
XLALDestroyMultiDetectorStateSeries ( cfg.multiDetStates );
XLALDestroyMultiAMCoeffs ( multiAMBuffer.multiAM );
XLALDestroyExpLUT();
/* ----- free amplitude prior pdfs ----- */
XLALDestroyPDF1D ( cfg.AmpPrior.pdf_h0Nat );
XLALDestroyPDF1D ( cfg.AmpPrior.pdf_cosi );
XLALDestroyPDF1D ( cfg.AmpPrior.pdf_psi );
XLALDestroyPDF1D ( cfg.AmpPrior.pdf_phi0 );
if ( cfg.logString ) XLALFree ( cfg.logString );
gsl_rng_free ( cfg.rng );
XLALDestroyUserVars();
/* did we forget anything ? (doesn't cover gsl-memory!) */
LALCheckMemoryLeaks();
return 0;
} /* main() */
int
main(int argc, char *argv[])
{
ConfigVariables config = empty_ConfigVariables;
UserVariables_t uvar = empty_UserVariables;
/* register user-variables */
XLAL_CHECK ( XLALInitUserVars ( &uvar ) == XLAL_SUCCESS, XLAL_EFUNC );
/* read cmdline & cfgfile */
XLAL_CHECK ( XLALUserVarReadAllInput ( argc,argv ) == XLAL_SUCCESS, XLAL_EFUNC );
if (uvar.help) { /* help requested: we're done */
exit(0);
}
if ( uvar.version )
{
XLALOutputVersionString ( stdout, lalDebugLevel );
exit(0);
}
/* basic setup and initializations */
XLAL_CHECK ( XLALInitCode( &config, &uvar, argv[0] ) == XLAL_SUCCESS, XLAL_EFUNC );
/* prepare output files */
FILE *fpOutab = NULL;
if ( uvar.outab ) {
XLAL_CHECK ( (fpOutab = fopen (uvar.outab, "wb")) != NULL, XLAL_EIO, "Error opening file '%s' for writing...", uvar.outab );
/* write header info in comments */
XLAL_CHECK ( XLAL_SUCCESS == XLALOutputVersionString ( fpOutab, 0 ), XLAL_EFUNC );
/* write the command-line */
for (int a = 0; a < argc; a++)
{
fprintf(fpOutab,"%%%% argv[%d]: '%s'\n", a, argv[a]);
}
/* write column headings */
fprintf(fpOutab, "%%%% columns:\n%%%% Alpha Delta tGPS ");
if ( config.numDetectors == 1 ) {
fprintf(fpOutab, " a(t) b(t)");
}
else {
for ( UINT4 X=0; X < config.numDetectors; X++ ) {
fprintf(fpOutab, " a[%d](t) b[%d](t)", X, X);
}
}
fprintf(fpOutab, "\n");
}
FILE *fpOutABCD = NULL;
if ( uvar.outABCD ) {
XLAL_CHECK ( (fpOutABCD = fopen (uvar.outABCD, "wb")) != NULL, XLAL_EIO, "Error opening file '%s' for writing...", uvar.outABCD );
/* write header info in comments */
XLAL_CHECK ( XLAL_SUCCESS == XLALOutputVersionString ( fpOutABCD, 0 ), XLAL_EFUNC );
/* write the command-line */
for (int a = 0; a < argc; a++)
{
fprintf(fpOutABCD,"%%%% argv[%d]: '%s'\n", a, argv[a]);
}
/* write column headings */
fprintf(fpOutABCD, "%%%% columns:\n%%%% Alpha Delta");
fprintf(fpOutABCD, " A B C D");
if ( config.numDetectors > 1 ) {
fprintf(fpOutABCD, " ");
for ( UINT4 X=0; X < config.numDetectors; X++ ) {
fprintf(fpOutABCD, " A[%d] B[%d] C[%d] D[%d]", X, X, X, X);
}
}
fprintf(fpOutABCD, "\n");
}
/* loop over sky positions (outer loop, could allow for buffering if necessary) */
for (UINT4 n = 0; n < config.numSkyPoints; n++) {
SkyPosition skypos;
skypos.system = COORDINATESYSTEM_EQUATORIAL;
skypos.longitude = config.Alpha->data[n];
skypos.latitude = config.Delta->data[n];
/* do the actual computation of the antenna pattern functions */
MultiAMCoeffs *multiAM;
XLAL_CHECK ( ( multiAM = XLALComputeMultiAMCoeffs ( config.multiDetStates, config.multiNoiseWeights, skypos ) ) != NULL, XLAL_EFUNC, "XLALComputeAMCoeffs() failed." );
/* for multi-IFO run with weights, do it again, without weights, to get single-IFO quantities consistent with single-IFO runs
* FIXME: remove this temporary hack when MultiAmCoeffs have been changed to include non-weighted single-IFO quantities
*/
MultiAMCoeffs *multiAMforSingle = NULL;
MultiAMCoeffs *multiAMunweighted = NULL;
if ( ( config.numDetectors > 1 ) && ( config.multiNoiseWeights != NULL ) ) {
XLAL_CHECK ( ( multiAMunweighted = XLALComputeMultiAMCoeffs ( config.multiDetStates, NULL, skypos ) ) != NULL, XLAL_EFUNC, "XLALComputeAMCoeffs() failed." );
multiAMforSingle = multiAMunweighted;
}
else {
multiAMforSingle = multiAM;
}
/* write out the data for this sky point */
if ( uvar.outab ) { // output a(t), b(t) at each timestamp
for (UINT4 t = 0; t < config.numTimeStamps; t++) { // FIXME: does not work for different multi-IFO numTimeStampsX
fprintf (fpOutab, "%.7f %.7f %d", config.Alpha->data[n], config.Delta->data[n], config.multiTimestamps->data[0]->data[t].gpsSeconds );
for ( UINT4 X=0; X < config.numDetectors; X++ ) {
fprintf(fpOutab, " %12.8f %12.8f", multiAMforSingle->data[X]->a->data[t], multiAMforSingle->data[X]->b->data[t]);
} // for ( UINT4 X=0; X < config.numDetectors; X++ )
fprintf(fpOutab, "\n");
} // for (UINT4 t = 0; t < config.numTimeStamps; t++)
} // if ( uvar.outab )
if ( uvar.outABCD ) { // output ABCD averaged over all timestamps
// FIXME: stop doing average manually when AMCoeffs is changed to contain averaged values
REAL8 A = multiAM->Mmunu.Ad/config.numTimeStamps;
REAL8 B = multiAM->Mmunu.Bd/config.numTimeStamps;
REAL8 C = multiAM->Mmunu.Cd/config.numTimeStamps;
REAL8 D = A*B-SQ(C);
fprintf (fpOutABCD, "%.7f %.7f %12.8f %12.8f %12.8f %12.8f", config.Alpha->data[n], config.Delta->data[n], A, B, C, D );
if ( config.numDetectors > 1 ) {
for ( UINT4 X=0; X < config.numDetectors; X++ ) {
REAL4 AX = multiAMforSingle->data[X]->A/config.numTimeStampsX->data[X];
REAL4 BX = multiAMforSingle->data[X]->B/config.numTimeStampsX->data[X];
REAL4 CX = multiAMforSingle->data[X]->C/config.numTimeStampsX->data[X];
REAL4 DX = AX*BX-SQ(CX);
fprintf(fpOutABCD, " %12.8f %12.8f %12.8f %12.8f", AX, BX, CX, DX);
}
}
fprintf(fpOutABCD, "\n");
} // if ( uvar.outABCD )
XLALDestroyMultiAMCoeffs ( multiAM );
if ( multiAMunweighted ) {
XLALDestroyMultiAMCoeffs ( multiAMunweighted );
}
} // for (UINT4 n = 0; n < config.numSkyPoints; n++)
/* ----- close output files ----- */
if ( fpOutab ) {
fprintf (fpOutab, "\n");
fclose ( fpOutab );
}
if ( fpOutABCD ) {
fprintf (fpOutABCD, "\n");
fclose ( fpOutABCD );
}
/* ----- done: free all memory */
XLAL_CHECK ( XLALDestroyConfig( &config ) == XLAL_SUCCESS, XLAL_EFUNC );
LALCheckMemoryLeaks();
return 0;
} /* main */
int main(int argc, char *argv[]){
/* LALStatus pointer */
static LALStatus status;
/* time and velocity */
static LIGOTimeGPSVector timeV;
static REAL8Cart3CoorVector velV;
static REAL8Vector timeDiffV;
LIGOTimeGPS firstTimeStamp;
/* standard pulsar sft types */
MultiSFTVector *inputSFTs = NULL;
UINT4 binsSFT;
UINT4 sftFminBin;
UINT4 numsft;
INT4 k;
FILE *fp=NULL;
/* information about all the ifos */
MultiDetectorStateSeries *mdetStates = NULL;
UINT4 numifo;
/* vector of weights */
REAL8Vector weightsV;
/* ephemeris */
EphemerisData *edat=NULL;
static UCHARPeakGram pg1;
static HoughTemplate pulsarTemplate;
static REAL8Vector foft;
/* miscellaneous */
UINT4 mObsCoh;
REAL8 timeBase, deltaF;
REAL8 numberCount;
/* Chi2Test parameters */
HoughParamsTest chi2Params;
REAL8Vector numberCountV; /* Vector with the number count of each block inside */
REAL8 numberCountTotal; /* Sum over all the numberCounts */
REAL8 chi2;
/* sft constraint variables */
LIGOTimeGPS startTimeGPS, endTimeGPS;
LIGOTimeGPSVector *inputTimeStampsVector=NULL;
REAL8 alphaPeak, meanN, sigmaN;
/* user input variables */
BOOLEAN uvar_help, uvar_weighAM, uvar_weighNoise;
INT4 uvar_blocksRngMed, uvar_nfSizeCylinder, uvar_maxBinsClean;
REAL8 uvar_startTime, uvar_endTime;
REAL8 uvar_fStart, uvar_peakThreshold, uvar_fSearchBand;
REAL8 uvar_Alpha, uvar_Delta, uvar_Freq, uvar_fdot;
REAL8 uvar_AlphaWeight, uvar_DeltaWeight;
CHAR *uvar_earthEphemeris=NULL;
CHAR *uvar_sunEphemeris=NULL;
CHAR *uvar_sftDir=NULL;
CHAR *uvar_timeStampsFile=NULL;
CHAR *uvar_outfile=NULL;
LALStringVector *uvar_linefiles=NULL;
INT4 uvar_p;
/* Set up the default parameters */
/* LAL error-handler */
lal_errhandler = LAL_ERR_EXIT;
uvar_help = FALSE;
uvar_weighAM = TRUE;
uvar_weighNoise = TRUE;
uvar_blocksRngMed = BLOCKSRNGMED;
uvar_nfSizeCylinder = NFSIZE;
uvar_fStart = F0;
uvar_fSearchBand = FBAND;
uvar_peakThreshold = THRESHOLD;
uvar_maxBinsClean = 100;
uvar_startTime= 0;
uvar_endTime = LAL_INT4_MAX;
uvar_Alpha = 1.0;
uvar_Delta = 1.0;
uvar_Freq = 310.0;
uvar_fdot = 0.0;
uvar_AlphaWeight = uvar_Alpha;
uvar_DeltaWeight = uvar_Delta;
uvar_p = NBLOCKSTEST;
chi2Params.length=uvar_p;
chi2Params.numberSFTp=NULL;
chi2Params.sumWeight=NULL;
chi2Params.sumWeightSquare=NULL;
uvar_outfile = (CHAR *)LALCalloc( MAXFILENAMELENGTH , sizeof(CHAR));
strcpy(uvar_outfile, "./tempout");
uvar_earthEphemeris = (CHAR *)LALCalloc( MAXFILENAMELENGTH , sizeof(CHAR));
strcpy(uvar_earthEphemeris,EARTHEPHEMERIS);
uvar_sunEphemeris = (CHAR *)LALCalloc( MAXFILENAMELENGTH , sizeof(CHAR));
strcpy(uvar_sunEphemeris,SUNEPHEMERIS);
uvar_sftDir = (CHAR *)LALCalloc( MAXFILENAMELENGTH , sizeof(CHAR));
strcpy(uvar_sftDir,SFTDIRECTORY);
/* register user input variables */
LAL_CALL( LALRegisterBOOLUserVar( &status, "help", 'h', UVAR_HELP, "Print this message", &uvar_help), &status);
LAL_CALL( LALRegisterREALUserVar( &status, "fStart", 'f', UVAR_OPTIONAL, "Start search frequency", &uvar_fStart), &status);
LAL_CALL( LALRegisterREALUserVar( &status, "fSearchBand", 'b', UVAR_OPTIONAL, "Search frequency band", &uvar_fSearchBand), &status);
LAL_CALL( LALRegisterREALUserVar( &status, "startTime", 0, UVAR_OPTIONAL, "GPS start time of observation", &uvar_startTime), &status);
LAL_CALL( LALRegisterREALUserVar( &status, "endTime", 0, UVAR_OPTIONAL, "GPS end time of observation", &uvar_endTime), &status);
LAL_CALL( LALRegisterSTRINGUserVar( &status, "timeStampsFile", 0, UVAR_OPTIONAL, "Input time-stamps file", &uvar_timeStampsFile), &status);
LAL_CALL( LALRegisterREALUserVar( &status, "peakThreshold", 0, UVAR_OPTIONAL, "Peak selection threshold", &uvar_peakThreshold), &status);
LAL_CALL( LALRegisterBOOLUserVar( &status, "weighAM", 0, UVAR_OPTIONAL, "Use amplitude modulation weights", &uvar_weighAM), &status);
LAL_CALL( LALRegisterBOOLUserVar( &status, "weighNoise", 0, UVAR_OPTIONAL, "Use SFT noise weights", &uvar_weighNoise), &status);
LAL_CALL( LALRegisterSTRINGUserVar( &status, "earthEphemeris", 'E', UVAR_OPTIONAL, "Earth Ephemeris file", &uvar_earthEphemeris), &status);
LAL_CALL( LALRegisterSTRINGUserVar( &status, "sunEphemeris", 'S', UVAR_OPTIONAL, "Sun Ephemeris file", &uvar_sunEphemeris), &status);
LAL_CALL( LALRegisterSTRINGUserVar( &status, "sftDir", 'D', UVAR_REQUIRED, "SFT filename pattern", &uvar_sftDir), &status);
LAL_CALL( LALRegisterLISTUserVar( &status, "linefiles", 0, UVAR_OPTIONAL, "Comma separated List of linefiles (filenames must contain IFO name)",
&uvar_linefiles), &status);
LAL_CALL( LALRegisterREALUserVar( &status, "Alpha", 0, UVAR_OPTIONAL, "Sky location (longitude)", &uvar_Alpha), &status);
LAL_CALL( LALRegisterREALUserVar( &status, "Delta", 0, UVAR_OPTIONAL, "Sky location (latitude)", &uvar_Delta), &status);
LAL_CALL( LALRegisterREALUserVar( &status, "Freq", 0, UVAR_OPTIONAL, "Template frequency", &uvar_Freq), &status);
LAL_CALL( LALRegisterREALUserVar( &status, "fdot", 0, UVAR_OPTIONAL, "First spindown", &uvar_fdot), &status);
LAL_CALL( LALRegisterREALUserVar( &status, "AlphaWeight", 0, UVAR_OPTIONAL, "sky Alpha for weight calculation", &uvar_AlphaWeight), &status);
LAL_CALL( LALRegisterREALUserVar( &status, "DeltaWeight", 0, UVAR_OPTIONAL, "sky Delta for weight calculation", &uvar_DeltaWeight), &status);
LAL_CALL( LALRegisterINTUserVar( &status, "nfSizeCylinder", 0, UVAR_OPTIONAL, "Size of cylinder of PHMDs", &uvar_nfSizeCylinder), &status);
LAL_CALL( LALRegisterINTUserVar( &status, "blocksRngMed", 0, UVAR_OPTIONAL, "Running Median block size", &uvar_blocksRngMed), &status);
LAL_CALL( LALRegisterINTUserVar( &status, "maxBinsClean", 0, UVAR_OPTIONAL, "Maximum number of bins in cleaning", &uvar_maxBinsClean), &status);
LAL_CALL( LALRegisterSTRINGUserVar( &status, "outfile", 0, UVAR_OPTIONAL, "output file name", &uvar_outfile), &status);
LAL_CALL( LALRegisterINTUserVar( &status, "pdatablock", 'p', UVAR_OPTIONAL, "Number of data blocks for veto tests", &uvar_p), &status);
/* read all command line variables */
LAL_CALL( LALUserVarReadAllInput(&status, argc, argv), &status);
/* exit if help was required */
if (uvar_help)
exit(0);
/* very basic consistency checks on user input */
if ( uvar_fStart < 0 ) {
fprintf(stderr, "start frequency must be positive\n");
exit(1);
}
if ( uvar_fSearchBand < 0 ) {
fprintf(stderr, "search frequency band must be positive\n");
exit(1);
}
if ( uvar_peakThreshold < 0 ) {
fprintf(stderr, "peak selection threshold must be positive\n");
exit(1);
}
/***** start main calculations *****/
chi2Params.length=uvar_p;
chi2Params.numberSFTp = (UINT4 *)LALMalloc( uvar_p*sizeof(UINT4));
chi2Params.sumWeight = (REAL8 *)LALMalloc( uvar_p*sizeof(REAL8));
chi2Params.sumWeightSquare = (REAL8 *)LALMalloc( uvar_p*sizeof(REAL8));
/* read sft Files and set up weights */
{
/* new SFT I/O data types */
SFTCatalog *catalog = NULL;
static SFTConstraints constraints;
REAL8 doppWings, f_min, f_max;
/* set detector constraint */
constraints.detector = NULL;
if ( LALUserVarWasSet( &uvar_startTime ) ) {
XLALGPSSetREAL8(&startTimeGPS, uvar_startTime);
constraints.minStartTime = &startTimeGPS;
}
if ( LALUserVarWasSet( &uvar_endTime ) ) {
XLALGPSSetREAL8(&endTimeGPS, uvar_endTime);
constraints.maxEndTime = &endTimeGPS;
}
if ( LALUserVarWasSet( &uvar_timeStampsFile ) ) {
LAL_CALL ( LALReadTimestampsFile ( &status, &inputTimeStampsVector, uvar_timeStampsFile), &status);
constraints.timestamps = inputTimeStampsVector;
}
/* get sft catalog */
LAL_CALL( LALSFTdataFind( &status, &catalog, uvar_sftDir, &constraints), &status);
if ( (catalog == NULL) || (catalog->length == 0) ) {
fprintf (stderr,"Unable to match any SFTs with pattern '%s'\n", uvar_sftDir );
exit(1);
}
/* now we can free the inputTimeStampsVector */
if ( LALUserVarWasSet( &uvar_timeStampsFile ) ) {
LALDestroyTimestampVector ( &status, &inputTimeStampsVector);
}
/* get some sft parameters */
mObsCoh = catalog->length; /* number of sfts */
deltaF = catalog->data->header.deltaF; /* frequency resolution */
timeBase= 1.0/deltaF; /* coherent integration time */
// unused: UINT8 f0Bin = floor( uvar_fStart * timeBase + 0.5); /* initial search frequency */
// unused: INT4 length = uvar_fSearchBand * timeBase; /* total number of search bins - 1 */
/* catalog is ordered in time so we can get start, end time and tObs*/
firstTimeStamp = catalog->data[0].header.epoch;
// unused: LIGOTimeGPS lastTimeStamp = catalog->data[mObsCoh - 1].header.epoch;
/* allocate memory for velocity vector */
velV.length = mObsCoh;
velV.data = NULL;
velV.data = (REAL8Cart3Coor *)LALCalloc(mObsCoh, sizeof(REAL8Cart3Coor));
/* allocate memory for timestamps vector */
timeV.length = mObsCoh;
timeV.data = NULL;
timeV.data = (LIGOTimeGPS *)LALCalloc( mObsCoh, sizeof(LIGOTimeGPS));
/* allocate memory for vector of time differences from start */
timeDiffV.length = mObsCoh;
timeDiffV.data = NULL;
timeDiffV.data = (REAL8 *)LALCalloc(mObsCoh, sizeof(REAL8));
/* add wings for Doppler modulation and running median block size*/
doppWings = (uvar_fStart + uvar_fSearchBand) * VTOT;
f_min = uvar_fStart - doppWings - (uvar_blocksRngMed + uvar_nfSizeCylinder) * deltaF;
f_max = uvar_fStart + uvar_fSearchBand + doppWings + (uvar_blocksRngMed + uvar_nfSizeCylinder) * deltaF;
/* read sft files making sure to add extra bins for running median */
/* read the sfts */
LAL_CALL( LALLoadMultiSFTs ( &status, &inputSFTs, catalog, f_min, f_max), &status);
/* clean sfts if required */
if ( LALUserVarWasSet( &uvar_linefiles ) )
{
RandomParams *randPar=NULL;
FILE *fpRand=NULL;
INT4 seed, ranCount;
if ( (fpRand = fopen("/dev/urandom", "r")) == NULL ) {
fprintf(stderr,"Error in opening /dev/urandom" );
exit(1);
}
if ( (ranCount = fread(&seed, sizeof(seed), 1, fpRand)) != 1 ) {
fprintf(stderr,"Error in getting random seed" );
exit(1);
}
LAL_CALL ( LALCreateRandomParams (&status, &randPar, seed), &status );
LAL_CALL( LALRemoveKnownLinesInMultiSFTVector ( &status, inputSFTs, uvar_maxBinsClean, uvar_blocksRngMed, uvar_linefiles, randPar), &status);
LAL_CALL ( LALDestroyRandomParams (&status, &randPar), &status);
fclose(fpRand);
} /* end cleaning */
/* SFT info -- assume all SFTs have same length */
numifo = inputSFTs->length;
binsSFT = inputSFTs->data[0]->data->data->length;
sftFminBin = (INT4) floor(inputSFTs->data[0]->data[0].f0 * timeBase + 0.5);
LAL_CALL( LALDestroySFTCatalog( &status, &catalog ), &status);
} /* end of sft reading block */
/* get detector velocities weights vector, and timestamps */
{
MultiNoiseWeights *multweight = NULL;
MultiPSDVector *multPSD = NULL;
UINT4 iIFO, iSFT, j;
/* get ephemeris */
edat = (EphemerisData *)LALCalloc(1, sizeof(EphemerisData));
(*edat).ephiles.earthEphemeris = uvar_earthEphemeris;
(*edat).ephiles.sunEphemeris = uvar_sunEphemeris;
LAL_CALL( LALInitBarycenter( &status, edat), &status);
/* normalize sfts */
LAL_CALL( LALNormalizeMultiSFTVect (&status, &multPSD, inputSFTs, uvar_blocksRngMed), &status);
/* set up weights */
weightsV.length = mObsCoh;
weightsV.data = (REAL8 *)LALCalloc(1, mObsCoh * sizeof(REAL8));
/* initialize all weights to unity */
LAL_CALL( LALHOUGHInitializeWeights( &status, &weightsV), &status);
/* compute multi noise weights if required */
if ( uvar_weighNoise ) {
LAL_CALL ( LALComputeMultiNoiseWeights ( &status, &multweight, multPSD, uvar_blocksRngMed, 0), &status);
}
/* we are now done with the psd */
LAL_CALL ( LALDestroyMultiPSDVector ( &status, &multPSD), &status);
/* get information about all detectors including velocity and timestamps */
/* note that this function returns the velocity at the
mid-time of the SFTs -- should not make any difference */
LAL_CALL ( LALGetMultiDetectorStates ( &status, &mdetStates, inputSFTs, edat), &status);
/* copy the timestamps, weights, and velocity vector */
for (j = 0, iIFO = 0; iIFO < numifo; iIFO++ ) {
numsft = mdetStates->data[iIFO]->length;
for ( iSFT = 0; iSFT < numsft; iSFT++, j++) {
velV.data[j].x = mdetStates->data[iIFO]->data[iSFT].vDetector[0];
velV.data[j].y = mdetStates->data[iIFO]->data[iSFT].vDetector[1];
velV.data[j].z = mdetStates->data[iIFO]->data[iSFT].vDetector[2];
if ( uvar_weighNoise )
weightsV.data[j] = multweight->data[iIFO]->data[iSFT];
/* mid time of sfts */
timeV.data[j] = mdetStates->data[iIFO]->data[iSFT].tGPS;
} /* loop over SFTs */
} /* loop over IFOs */
if ( uvar_weighNoise ) {
LAL_CALL( LALHOUGHNormalizeWeights( &status, &weightsV), &status);
}
/* compute the time difference relative to startTime for all SFTs */
for(j = 0; j < mObsCoh; j++)
timeDiffV.data[j] = XLALGPSDiff( timeV.data + j, &firstTimeStamp );
if ( uvar_weighNoise ) {
LAL_CALL ( LALDestroyMultiNoiseWeights ( &status, &multweight), &status);
}
} /* end block for noise weights, velocity and time */
/* calculate amplitude modulation weights if required */
if (uvar_weighAM)
{
MultiAMCoeffs *multiAMcoef = NULL;
UINT4 iIFO, iSFT;
SkyPosition skypos;
/* get the amplitude modulation coefficients */
skypos.longitude = uvar_AlphaWeight;
skypos.latitude = uvar_DeltaWeight;
skypos.system = COORDINATESYSTEM_EQUATORIAL;
LAL_CALL ( LALGetMultiAMCoeffs ( &status, &multiAMcoef, mdetStates, skypos), &status);
/* loop over the weights and multiply them by the appropriate
AM coefficients */
for ( k = 0, iIFO = 0; iIFO < numifo; iIFO++) {
numsft = mdetStates->data[iIFO]->length;
for ( iSFT = 0; iSFT < numsft; iSFT++, k++) {
REAL8 a, b;
a = multiAMcoef->data[iIFO]->a->data[iSFT];
b = multiAMcoef->data[iIFO]->b->data[iSFT];
weightsV.data[k] *= (a*a + b*b);
} /* loop over SFTs */
} /* loop over IFOs */
LAL_CALL( LALHOUGHNormalizeWeights( &status, &weightsV), &status);
XLALDestroyMultiAMCoeffs ( multiAMcoef );
} /* end AM weights calculation */
/* misc. memory allocations */
/* memory for one spindown */
pulsarTemplate.spindown.length = 1;
pulsarTemplate.spindown.data = NULL;
pulsarTemplate.spindown.data = (REAL8 *)LALMalloc(sizeof(REAL8));
/* copy template parameters */
pulsarTemplate.spindown.data[0] = uvar_fdot;
pulsarTemplate.f0 = uvar_Freq;
pulsarTemplate.latitude = uvar_Delta;
pulsarTemplate.longitude = uvar_Alpha;
/* memory for f(t) vector */
foft.length = mObsCoh;
foft.data = NULL;
foft.data = (REAL8 *)LALMalloc(mObsCoh*sizeof(REAL8));
/* memory for peakgram */
pg1.length = binsSFT;
pg1.data = NULL;
pg1.data = (UCHAR *)LALCalloc( binsSFT, sizeof(UCHAR));
/* memory for number Count Vector */
numberCountV.length = uvar_p;
numberCountV.data = NULL;
numberCountV.data = (REAL8 *)LALMalloc( uvar_p*sizeof(REAL8));
/* block for calculating peakgram and number count */
{
UINT4 iIFO, iSFT, ii, numberSFTp;
INT4 ind;
REAL8 sumWeightSquare;
SFTtype *sft;
/* compute mean and sigma for noise only */
/* first calculate the sum of the weights squared */
sumWeightSquare = 0.0;
for ( k = 0; k < (INT4)mObsCoh; k++)
sumWeightSquare += weightsV.data[k] * weightsV.data[k];
/* probability of selecting a peak expected mean and standard deviation for noise only */
alphaPeak = exp( - uvar_peakThreshold);
meanN = mObsCoh* alphaPeak;
sigmaN = sqrt(sumWeightSquare * alphaPeak * (1.0 - alphaPeak));
/* the received frequency as a function of time */
LAL_CALL( ComputeFoft(&status, &foft, &pulsarTemplate, &timeDiffV, &velV, timeBase), &status);
LAL_CALL(SplitSFTs(&status, &weightsV, &chi2Params), &status);
/* loop over SFT, generate peakgram and get number count */
UINT4 j;
j=0;
iIFO=0;
iSFT=0;
numsft = mdetStates->data[iIFO]->length;
for (k=0 ; k<uvar_p ; k++ ){
numberSFTp=chi2Params.numberSFTp[k];
numberCount = 0;
for (ii=0 ; (ii < numberSFTp)&&(iIFO<numifo) ; ii++) {
sft = inputSFTs->data[iIFO]->data + iSFT;
LAL_CALL (SFTtoUCHARPeakGram( &status, &pg1, sft, uvar_peakThreshold), &status);
ind = floor( foft.data[j]*timeBase - sftFminBin + 0.5);
numberCount += pg1.data[ind]*weightsV.data[j];
j++;
iSFT++;
if (iSFT >= numsft){
iIFO++;
iSFT=0;
if (iIFO<numifo){
numsft = mdetStates->data[iIFO]->length;
}
}
} /* loop over SFTs */
numberCountV.data[k]=numberCount;
} /* loop over blocks */
}
/* Chi2 Test */
{
REAL8 eta; /* Auxiliar variable */
REAL8 nj, sumWeightj, sumWeightSquarej;
numberCountTotal=0;
chi2=0;
for(k=0; k<uvar_p ; k++){
numberCountTotal += numberCountV.data[k];
}
eta=numberCountTotal/mObsCoh;
INT4 j;
for(j=0 ; j<(uvar_p) ; j++){
nj=numberCountV.data[j];
sumWeightj=chi2Params.sumWeight[j];
sumWeightSquarej=chi2Params.sumWeightSquare[j];
chi2 += (nj-sumWeightj*eta)*(nj-sumWeightj*eta)/(sumWeightSquarej*eta*(1-eta));
}
}
fp = fopen(uvar_outfile , "w");
setvbuf(fp, (char *)NULL, _IOLBF, 0);
fprintf(fp, "%g %g %g %g %g %g %g %g \n", (numberCountTotal - meanN)/sigmaN, meanN ,sigmaN, chi2, uvar_Freq, uvar_Alpha, uvar_Delta, uvar_fdot);
/* fprintf(stdout, "%g %g %g %g %g %g %g %g \n", (numberCountTotal - meanN)/sigmaN, meanN ,sigmaN, chi2, uvar_Freq, uvar_Alpha, uvar_Delta, uvar_fdot);*/
fclose(fp);
/* free memory */
LALFree(pulsarTemplate.spindown.data);
LALFree(timeV.data);
LALFree(timeDiffV.data);
LALFree(foft.data);
LALFree(velV.data);
LALFree(weightsV.data);
XLALDestroyMultiDetectorStateSeries ( mdetStates );
LALFree(edat->ephemE);
LALFree(edat->ephemS);
LALFree(edat);
LAL_CALL (LALDestroyMultiSFTVector(&status, &inputSFTs), &status );
LALFree(pg1.data);
LALFree(numberCountV.data);
LALFree(chi2Params.numberSFTp);
LALFree(chi2Params.sumWeight);
LALFree(chi2Params.sumWeightSquare);
LAL_CALL (LALDestroyUserVars(&status), &status);
LALCheckMemoryLeaks();
if ( lalDebugLevel )
REPORTSTATUS ( &status);
return status.statusCode;
}
int main(int argc, char *argv[])
{
UserVariables_t XLAL_INIT_DECL(uvar);
XLAL_CHECK ( InitUserVars(&uvar, argc, argv) == XLAL_SUCCESS, XLAL_EFUNC );
MultiLALDetector *detectors = NULL;
XLAL_CHECK( (detectors = XLALMalloc(sizeof(MultiLALDetector))) != NULL, XLAL_ENOMEM );
detectors->length = uvar.IFO->length;
for (UINT4 ii=0; ii<detectors->length; ii++) {
if (strcmp("H1", uvar.IFO->data[ii])==0) {
detectors->sites[ii] = lalCachedDetectors[LAL_LHO_4K_DETECTOR]; //H1
} else if (strcmp("L1",uvar.IFO->data[ii])==0) {
detectors->sites[ii] = lalCachedDetectors[LAL_LLO_4K_DETECTOR]; //L1
} else if (strcmp("V1", uvar.IFO->data[ii])==0) {
detectors->sites[ii] = lalCachedDetectors[LAL_VIRGO_DETECTOR]; //V1
} else if (strcmp("H2", uvar.IFO->data[ii])==0) {
detectors->sites[ii] = lalCachedDetectors[LAL_LHO_2K_DETECTOR]; //H2
} else if (strcmp("H2r", uvar.IFO->data[ii])==0) {
LALDetector H2 = lalCachedDetectors[LAL_LHO_2K_DETECTOR]; //H2 rotated
H2.frDetector.xArmAzimuthRadians -= 0.25*LAL_PI;
H2.frDetector.yArmAzimuthRadians -= 0.25*LAL_PI;
memset(&(H2.frDetector.name), 0, sizeof(CHAR)*LALNameLength);
snprintf(H2.frDetector.name, LALNameLength, "%s", "LHO_2k_rotatedPiOver4");
XLAL_CHECK( (XLALCreateDetector(&(detectors->sites[ii]), &(H2.frDetector), LALDETECTORTYPE_IFODIFF)) != NULL, XLAL_EFUNC );
} else {
XLAL_ERROR(XLAL_EINVAL, "Not using valid interferometer! Expected 'H1', 'H2', 'H2r' (rotated H2), 'L1', or 'V1' not %s.\n", uvar.IFO->data[ii]);
}
}
EphemerisData *edat = NULL;
XLAL_CHECK( (edat = XLALInitBarycenter(uvar.ephemEarth, uvar.ephemSun)) != NULL, XLAL_EFUNC );
LIGOTimeGPS tStart;
XLALGPSSetREAL8 ( &tStart, uvar.t0 );
XLAL_CHECK( xlalErrno == 0, XLAL_EFUNC, "XLALGPSSetREAL8 failed\n" );
MultiLIGOTimeGPSVector *multiTimestamps = NULL;
XLAL_CHECK( (multiTimestamps = XLALMakeMultiTimestamps(tStart, uvar.Tobs, uvar.Tsft, uvar.SFToverlap, detectors->length)) != NULL, XLAL_EFUNC );
LIGOTimeGPS refTime = multiTimestamps->data[0]->data[0];
MultiDetectorStateSeries *multiStateSeries = NULL;
XLAL_CHECK( (multiStateSeries = XLALGetMultiDetectorStates(multiTimestamps, detectors, edat, uvar.SFToverlap)) != NULL, XLAL_EFUNC );
gsl_rng *rng = NULL;
XLAL_CHECK( (rng = gsl_rng_alloc(gsl_rng_mt19937)) != NULL, XLAL_EFUNC );
gsl_rng_set(rng, 0);
FILE *OUTPUT;
XLAL_CHECK( (OUTPUT = fopen(uvar.outfilename,"w")) != NULL, XLAL_EIO, "Output file %s could not be opened\n", uvar.outfilename );
for (INT4 n=0; n<uvar.skylocations; n++) {
SkyPosition skypos;
if (XLALUserVarWasSet(&(uvar.alpha)) && XLALUserVarWasSet(&(uvar.delta)) && n==0) {
skypos.longitude = uvar.alpha;
skypos.latitude = uvar.delta;
skypos.system = COORDINATESYSTEM_EQUATORIAL;
} else {
skypos.longitude = LAL_TWOPI*gsl_rng_uniform(rng);
skypos.latitude = LAL_PI*gsl_rng_uniform(rng) - LAL_PI_2;
skypos.system = COORDINATESYSTEM_EQUATORIAL;
}
REAL8 cosi0, psi0;
if (XLALUserVarWasSet(&(uvar.cosi)) && n==0) cosi0 = uvar.cosi;
else cosi0 = 2.0*gsl_rng_uniform(rng) - 1.0;
if (XLALUserVarWasSet(&(uvar.psi)) && n==0) psi0 = uvar.psi;
else psi0 = LAL_PI*gsl_rng_uniform(rng);
MultiAMCoeffs *multiAMcoefficients = NULL;
XLAL_CHECK( (multiAMcoefficients = XLALComputeMultiAMCoeffs(multiStateSeries, NULL, skypos)) != NULL, XLAL_EFUNC );
MultiSSBtimes *multissb = NULL;
XLAL_CHECK( (multissb = XLALGetMultiSSBtimes(multiStateSeries, skypos, refTime, SSBPREC_RELATIVISTICOPT)) != NULL, XLAL_EFUNC );
REAL8 frequency = 1000.0;
REAL8 frequency0 = frequency + (gsl_rng_uniform(rng)-0.5)/uvar.Tsft;
for (UINT4 ii=0; ii<multiAMcoefficients->data[0]->a->length; ii++) {
REAL4 Fplus0 = multiAMcoefficients->data[0]->a->data[ii]*cos(2.0*psi0) + multiAMcoefficients->data[0]->b->data[ii]*sin(2.0*psi0);
REAL4 Fcross0 = multiAMcoefficients->data[0]->b->data[ii]*cos(2.0*psi0) - multiAMcoefficients->data[0]->a->data[ii]*sin(2.0*psi0);
REAL4 Fplus1 = multiAMcoefficients->data[1]->a->data[ii]*cos(2.0*psi0) + multiAMcoefficients->data[1]->b->data[ii]*sin(2.0*psi0);
REAL4 Fcross1 = multiAMcoefficients->data[1]->b->data[ii]*cos(2.0*psi0) - multiAMcoefficients->data[1]->a->data[ii]*sin(2.0*psi0);
COMPLEX16 RatioTerm0 = crect(0.5*Fplus1*(1.0+cosi0*cosi0), Fcross1*cosi0)/crect(0.5*Fplus0*(1.0+cosi0*cosi0), Fcross0*cosi0); //real det-sig ratio term
REAL4 detPhaseArg = 0.0, detPhaseMag = 0.0;
BOOLEAN loopbroken = 0;
for (INT4 jj=0; jj<16 && !loopbroken; jj++) {
REAL4 psi = 0.0625*jj*LAL_PI;
Fplus0 = multiAMcoefficients->data[0]->a->data[ii]*cos(2.0*psi) + multiAMcoefficients->data[0]->b->data[ii]*sin(2.0*psi);
Fcross0 = multiAMcoefficients->data[0]->b->data[ii]*cos(2.0*psi) - multiAMcoefficients->data[0]->a->data[ii]*sin(2.0*psi);
Fplus1 = multiAMcoefficients->data[1]->a->data[ii]*cos(2.0*psi) + multiAMcoefficients->data[1]->b->data[ii]*sin(2.0*psi);
Fcross1 = multiAMcoefficients->data[1]->b->data[ii]*cos(2.0*psi) - multiAMcoefficients->data[1]->a->data[ii]*sin(2.0*psi);
for (INT4 kk=0; kk<21 && !loopbroken; kk++) {
REAL4 cosi = 1.0 - 2.0*0.05*kk;
if (!uvar.unrestrictedCosi) {
if (cosi0<0.0) cosi = -0.05*kk;
else cosi = 0.05*kk;
}
COMPLEX16 complexnumerator = crect(0.5*Fplus1*(1.0+cosi*cosi), Fcross1*cosi);
COMPLEX16 complexdenominator = crect(0.5*Fplus0*(1.0+cosi*cosi) , Fcross0*cosi);
if (cabs(complexdenominator)>1.0e-6) {
COMPLEX16 complexval = complexnumerator/complexdenominator;
detPhaseMag += fmin(cabs(complexval), 10.0);
detPhaseArg += gsl_sf_angle_restrict_pos(carg(complexval));
} else {
loopbroken = 1;
detPhaseMag = 0.0;
detPhaseArg = 0.0;
}
}
}
detPhaseMag /= 336.0;
detPhaseArg /= 336.0;
COMPLEX16 RatioTerm = cpolar(detPhaseMag, detPhaseArg);
//Bin of interest
REAL8 signalFrequencyBin = round(multissb->data[0]->Tdot->data[ii]*frequency0*uvar.Tsft) - frequency*uvar.Tsft; //estimated nearest freq in ref IFO
REAL8 timediff0 = multissb->data[0]->DeltaT->data[ii] - 0.5*uvar.Tsft*multissb->data[0]->Tdot->data[ii];
REAL8 timediff1 = multissb->data[1]->DeltaT->data[ii] - 0.5*uvar.Tsft*multissb->data[1]->Tdot->data[ii];
REAL8 tau = timediff1 - timediff0;
REAL8 freqshift0 = -LAL_TWOPI*tau*frequency0; //real freq shift
REAL8 freqshift = -LAL_TWOPI*tau*(round(multissb->data[0]->Tdot->data[ii]*frequency0*uvar.Tsft)/uvar.Tsft); //estimated freq shift
COMPLEX16 phaseshift0 = cpolar(1.0, freqshift0);
COMPLEX16 phaseshift = cpolar(1.0, freqshift);
REAL8 delta0_0 = (multissb->data[0]->Tdot->data[ii]*frequency0-frequency)*uvar.Tsft - signalFrequencyBin;
REAL8 delta1_0 = (multissb->data[1]->Tdot->data[ii]*frequency0-frequency)*uvar.Tsft - signalFrequencyBin;
REAL8 realSigBinDiff = round(delta0_0) - round(delta1_0);
delta1_0 += realSigBinDiff;
REAL8 delta0 = round(multissb->data[0]->Tdot->data[ii]*frequency0*uvar.Tsft)*(multissb->data[0]->Tdot->data[ii] - 1.0);
REAL8 delta1 = round(multissb->data[0]->Tdot->data[ii]*frequency0*uvar.Tsft)*(multissb->data[1]->Tdot->data[ii] - 1.0);
REAL8 estSigBinDiff = round(delta0) - round(delta1);
delta1 += estSigBinDiff;
COMPLEX16 dirichlet0;
if (!uvar.rectWindow) {
if (fabsf((REAL4)delta1_0)<(REAL4)1.0e-6) {
if (fabsf((REAL4)delta0_0)<(REAL4)1.0e-6) dirichlet0 = crect(1.0, 0.0);
else if (fabsf((REAL4)(delta0_0*delta0_0-1.0))<(REAL4)1.0e-6) dirichlet0 = crect(-2.0, 0.0);
else if (fabsf((REAL4)(delta0_0-roundf(delta0_0)))<(REAL4)1.0e-6) {
dirichlet0 = crect(0.0, 0.0);
continue;
}
else dirichlet0 = -LAL_PI*crectf(cos(LAL_PI*delta0_0), -sin(LAL_PI*delta0_0))*delta0_0*(delta0_0*delta0_0 - 1.0)/sin(LAL_PI*delta0_0);
}
else if (fabsf((REAL4)(delta1_0*delta1_0-1.0))<(REAL4)1.0e-6) {
if (fabsf((REAL4)delta0_0)<(REAL4)1.0e-6) dirichlet0 = crect(-0.5, 0.0);
else if (fabsf((REAL4)(delta0_0*delta0_0-1.0))<(REAL4)1.0e-6) dirichlet0 = crect(1.0, 0.0);
else if (fabsf((REAL4)(delta0_0-roundf(delta0_0)))<(REAL4)1.0e-6) {
dirichlet0 = crect(0.0, 0.0);
continue;
}
else dirichlet0 = -LAL_PI_2*crectf(-cos(LAL_PI*delta0_0), sin(LAL_PI*delta0_0))*delta0_0*(delta0_0*delta0_0 - 1.0)/sin(LAL_PI*delta0_0);
}
else if (fabsf((REAL4)delta0_0)<(REAL4)1.0e-6) dirichlet0 = -LAL_1_PI*crectf(cos(LAL_PI*delta1_0), sin(LAL_PI*delta1_0))*sin(LAL_PI*delta1_0)/(delta1_0*(delta1_0*delta1_0-1.0));
else if (fabsf((REAL4)(delta0_0*delta0_0-1.0))<(REAL4)1.0e-6) dirichlet0 = LAL_2_PI*crectf(cos(LAL_PI*delta1_0), sin(LAL_PI*delta1_0))*sin(LAL_PI*delta1_0)/(delta1_0*(delta1_0*delta1_0-1.0));
else if (fabsf((REAL4)(delta0_0-roundf(delta0_0)))<(REAL4)1.0e-6) {
dirichlet0 = crect(0.0, 0.0);
continue;
}
else dirichlet0 = sin(LAL_PI*delta1_0)/sin(LAL_PI*delta0_0)*(delta0_0*(delta0_0*delta0_0-1.0))/(delta1_0*(delta1_0*delta1_0-1.0))*cpolarf(1.0,LAL_PI*(delta1_0-delta0_0));
} else {
if (fabsf((REAL4)delta1_0)<(REAL4)1.0e-6) {
if (fabsf((REAL4)delta0_0)<(REAL4)1.0e-6) dirichlet0 = crect(1.0, 0.0);
else if (fabsf((REAL4)(delta0_0-roundf(delta0_0)))<(REAL4)1.0e-6) {
dirichlet0 = crect(0.0, 0.0);
continue;
}
else dirichlet0 = conj(1.0/((cpolar(1.0,LAL_TWOPI*delta0_0)-1.0)/crect(0.0,LAL_TWOPI*delta0_0)));
}
else if (fabsf((REAL4)delta0_0)<(REAL4)1.0e-6) dirichlet0 = conj((cpolar(1.0,LAL_TWOPI*delta1_0)-1.0)/crect(0.0,LAL_TWOPI*delta1_0));
else if (fabsf((REAL4)(delta0_0-roundf(delta0_0)))<(REAL4)1.0e-6) {
dirichlet0 = crect(0.0, 0.0);
continue;
}
else dirichlet0 = conj(((cpolar(1.0,LAL_TWOPI*delta1_0)-1.0)/crect(0.0,LAL_TWOPI*delta1_0))/((cpolar(1.0,LAL_TWOPI*delta0_0)-1.0)/crect(0.0,LAL_TWOPI*delta0_0)));
}
COMPLEX16 dirichlet;
if (!uvar.rectWindow) {
if (fabsf((REAL4)delta1)<(REAL4)1.0e-6) {
if (fabsf((REAL4)delta0)<(REAL4)1.0e-6) dirichlet = crect(1.0, 0.0);
else if (fabsf((REAL4)(delta0*delta0-1.0))<(REAL4)1.0e-6) dirichlet = crect(-2.0, 0.0);
else if (fabsf((REAL4)(delta0-roundf(delta0)))<(REAL4)1.0e-6) dirichlet = crect(0.0, 0.0);
else dirichlet = -LAL_PI*crectf(cos(LAL_PI*delta0), -sin(LAL_PI*delta0))*delta0*(delta0*delta0 - 1.0)/sin(LAL_PI*delta0);
}
else if (fabsf((REAL4)(delta1*delta1-1.0))<(REAL4)1.0e-6) {
if (fabsf((REAL4)delta0)<(REAL4)1.0e-6) dirichlet = crect(-0.5, 0.0);
else if (fabsf((REAL4)(delta0*delta0-1.0))<(REAL4)1.0e-6) dirichlet = crect(1.0, 0.0);
else if (fabsf((REAL4)(delta0-roundf(delta0)))<(REAL4)1.0e-6) dirichlet = crect(0.0, 0.0);
else dirichlet = -LAL_PI_2*crectf(-cos(LAL_PI*delta0), sin(LAL_PI*delta0))*delta0*(delta0*delta0 - 1.0)/sin(LAL_PI*delta0);
}
else if (fabsf((REAL4)delta0)<(REAL4)1.0e-6) dirichlet = -LAL_1_PI*crectf(cos(LAL_PI*delta1), sin(LAL_PI*delta1))*sin(LAL_PI*delta1)/(delta1*(delta1*delta1-1.0));
else if (fabsf((REAL4)(delta0*delta0-1.0))<(REAL4)1.0e-6) dirichlet = LAL_2_PI*crectf(cos(LAL_PI*delta1), sin(LAL_PI*delta1))*sin(LAL_PI*delta1)/(delta1*(delta1*delta1-1.0));
else if (fabsf((REAL4)(delta0-roundf(delta0)))<(REAL4)1.0e-6) dirichlet = crect(0.0, 0.0);
else dirichlet = sin(LAL_PI*delta1)/sin(LAL_PI*delta0)*(delta0*(delta0*delta0-1.0))/(delta1*(delta1*delta1-1.0))*cpolarf(1.0,LAL_PI*(delta1-delta0));
} else {
if (fabsf((REAL4)delta1)<(REAL4)1.0e-6) {
if (fabsf((REAL4)delta0)<(REAL4)1.0e-6) dirichlet = crect(1.0, 0.0);
else if (fabsf((REAL4)(delta0-roundf(delta0)))<(REAL4)1.0e-6) dirichlet = crect(0.0, 0.0);
else dirichlet = conj(1.0/((cpolar(1.0,LAL_TWOPI*delta0)-1.0)/crect(0.0,LAL_TWOPI*delta0)));
}
else if (fabsf((REAL4)delta0)<(REAL4)1.0e-6) dirichlet = conj((cpolar(1.0,LAL_TWOPI*delta1)-1.0)/crect(0.0,LAL_TWOPI*delta1));
else if (fabsf((REAL4)(delta0-roundf(delta0)))<(REAL4)1.0e-6) dirichlet = crect(0.0, 0.0);
else dirichlet = conj(((cpolar(1.0,LAL_TWOPI*delta1)-1.0)/crect(0.0,LAL_TWOPI*delta1))/((cpolar(1.0,LAL_TWOPI*delta0)-1.0)/crect(0.0,LAL_TWOPI*delta0)));
}
dirichlet = cpolar(1.0, carg(dirichlet));
if (fabs(floor(delta0)-floor(delta1))>=1.0) dirichlet *= -1.0;
COMPLEX16 realRatio = RatioTerm0*phaseshift0*conj(dirichlet0);
COMPLEX16 estRatio = RatioTerm*phaseshift*conj(dirichlet);
fprintf(OUTPUT, "%g %g %g %g\n", cabs(realRatio), gsl_sf_angle_restrict_pos(carg(realRatio)), cabs(estRatio), gsl_sf_angle_restrict_pos(carg(estRatio)));
}
XLALDestroyMultiAMCoeffs(multiAMcoefficients);
XLALDestroyMultiSSBtimes(multissb);
}
fclose(OUTPUT);
gsl_rng_free(rng);
XLALDestroyMultiDetectorStateSeries(multiStateSeries);
XLALDestroyMultiTimestamps(multiTimestamps);
XLALDestroyEphemerisData(edat);
XLALFree(detectors);
XLALDestroyUserVars();
}
/**
* Multi-IFO version of LALGetAMCoeffs().
* Get all antenna-pattern coefficients for all input detector-series.
*
* NOTE: contrary to LALGetAMCoeffs(), this functions *allocates* the output-vector,
* use XLALDestroyMultiAMCoeffs() to free this.
*/
void
LALGetMultiAMCoeffs (LALStatus *status, /**< [in/out] LAL status structure pointer */
MultiAMCoeffs **multiAMcoef, /**< [out] AM-coefficients for all input detector-state series */
const MultiDetectorStateSeries *multiDetStates, /**< [in] detector-states at timestamps t_i */
SkyPosition skypos /**< source sky-position [in equatorial coords!] */
)
{
UINT4 X, numDetectors;
MultiAMCoeffs *ret = NULL;
INITSTATUS(status);
ATTATCHSTATUSPTR (status);
/* check input */
ASSERT (multiDetStates, status,LALCOMPUTEAMH_ENULL, LALCOMPUTEAMH_MSGENULL);
ASSERT (multiDetStates->length, status,LALCOMPUTEAMH_ENULL, LALCOMPUTEAMH_MSGENULL);
ASSERT (multiAMcoef, status,LALCOMPUTEAMH_ENULL, LALCOMPUTEAMH_MSGENULL);
ASSERT ( *multiAMcoef == NULL, status,LALCOMPUTEAMH_ENONULL, LALCOMPUTEAMH_MSGENONULL);
ASSERT ( skypos.system == COORDINATESYSTEM_EQUATORIAL, status, LALCOMPUTEAMH_EINPUT, LALCOMPUTEAMH_MSGEINPUT );
numDetectors = multiDetStates->length;
if ( ( ret = LALCalloc( 1, sizeof( *ret ) )) == NULL ) {
ABORT (status, LALCOMPUTEAMH_EMEM, LALCOMPUTEAMH_MSGEMEM);
}
ret->length = numDetectors;
if ( ( ret->data = LALCalloc ( numDetectors, sizeof ( *ret->data ) )) == NULL ) {
LALFree ( ret );
ABORT (status, LALCOMPUTEAMH_EMEM, LALCOMPUTEAMH_MSGEMEM);
}
for ( X=0; X < numDetectors; X ++ )
{
AMCoeffs *amcoeX = NULL;
UINT4 numStepsX = multiDetStates->data[X]->length;
ret->data[X] = LALCalloc ( 1, sizeof ( *(ret->data[X]) ) );
amcoeX = ret->data[X];
amcoeX->a = XLALCreateREAL4Vector ( numStepsX );
if ( (amcoeX->b = XLALCreateREAL4Vector ( numStepsX )) == NULL ) {
LALPrintError ("\nOut of memory!\n\n");
goto failed;
}
/* LALGetAMCoeffs (status->statusPtr, amcoeX, multiDetStates->data[X], skypos ); */
LALNewGetAMCoeffs (status->statusPtr, amcoeX, multiDetStates->data[X], skypos );
if ( status->statusPtr->statusCode )
{
LALPrintError ( "\nCall to LALNewGetAMCoeffs() has failed ... \n\n");
goto failed;
}
} /* for X < numDetectors */
goto success;
failed:
/* free all memory allocated so far */
XLALDestroyMultiAMCoeffs ( ret );
ABORT ( status, -1, "LALGetMultiAMCoeffs() failed" );
success:
(*multiAMcoef) = ret;
DETATCHSTATUSPTR (status);
RETURN(status);
} /* LALGetMultiAMCoeffs() */
/* Function to compute (multi-IFO) F-statistic for given parameter-space point \a doppler,
* normalized SFT-data (normalized by <em>double-sided</em> PSD Sn), noise-weights
* and detector state-series
*
* NOTE: for better efficiency some quantities that need to be recomputed only for different
* sky-positions are buffered in \a cfBuffer if given.
* - In order to 'empty' this buffer (at the end) use XLALEmptyComputeFBuffer()
* - You CAN pass NULL for the \a cfBuffer if you don't want to use buffering (slower).
*
* NOTE2: there's a spaceholder for binary-pulsar parameters in \a psPoint, but this
* it not implemented yet.
*
*/
static int
ComputeFStat ( Fcomponents *Fstat, /* [out] Fstatistic + Fa, Fb */
const PulsarDopplerParams *doppler, /* parameter-space point to compute F for */
const MultiSFTVector *multiSFTs, /* normalized (by DOUBLE-sided Sn!) data-SFTs of all IFOs */
const MultiNoiseWeights *multiWeights, /* noise-weights of all SFTs */
const MultiDetectorStateSeries *multiDetStates, /* 'trajectories' of the different IFOs */
const ComputeFParams *params, /* addition computational params */
ComputeFBuffer *cfBuffer /* CF-internal buffering structure */
)
{
/* check input */
XLAL_CHECK ( Fstat != NULL, XLAL_EINVAL );
XLAL_CHECK ( multiSFTs != NULL, XLAL_EINVAL );
XLAL_CHECK ( doppler != NULL, XLAL_EINVAL );
XLAL_CHECK ( multiDetStates != NULL, XLAL_EINVAL );
XLAL_CHECK ( params != NULL, XLAL_EINVAL );
UINT4 numDetectors = multiSFTs->length;
XLAL_CHECK ( multiDetStates->length == numDetectors, XLAL_EINVAL );
XLAL_CHECK ( multiWeights==NULL || (multiWeights->length == numDetectors), XLAL_EINVAL );
Fcomponents retF = empty_Fcomponents;
MultiSSBtimes *multiSSB = NULL;
MultiSSBtimes *multiBinary = NULL;
const MultiSSBtimes *multiSSBTotal = NULL;
MultiAMCoeffs *multiAMcoef = NULL;
/* ----- prepare return of 'FstatAtoms' if requested */
if ( params->returnAtoms )
{
XLAL_CHECK ( (retF.multiFstatAtoms = XLALMalloc ( sizeof(*retF.multiFstatAtoms) )) != NULL, XLAL_ENOMEM );
retF.multiFstatAtoms->length = numDetectors;
XLAL_CHECK ( (retF.multiFstatAtoms->data = XLALMalloc ( numDetectors * sizeof(*retF.multiFstatAtoms->data) )) != NULL, XLAL_ENOMEM );
} /* if returnAtoms */
/* ----- check if that skyposition SSB+AMcoef were already buffered */
if ( cfBuffer
&& ( cfBuffer->multiDetStates == multiDetStates )
&& ( cfBuffer->Alpha == doppler->Alpha )
&& ( cfBuffer->Delta == doppler->Delta )
&& cfBuffer->multiSSB
&& cfBuffer->multiAMcoef )
{ /* yes ==> reuse */
multiSSB = cfBuffer->multiSSB;
multiAMcoef = cfBuffer->multiAMcoef;
} /* if have buffered stuff to reuse */
else
{
SkyPosition skypos;
skypos.system = COORDINATESYSTEM_EQUATORIAL;
skypos.longitude = doppler->Alpha;
skypos.latitude = doppler->Delta;
/* compute new AM-coefficients and SSB-times */
XLAL_CHECK ( (multiSSB = XLALGetMultiSSBtimes ( multiDetStates, skypos, doppler->refTime, params->SSBprec )) != NULL, XLAL_EFUNC );
XLAL_CHECK ( (multiAMcoef = XLALComputeMultiAMCoeffs ( multiDetStates, multiWeights, skypos )) != NULL, XLAL_EFUNC );
/* store these in buffer if available */
if ( cfBuffer )
{
XLALEmptyComputeFBuffer ( cfBuffer );
cfBuffer->multiSSB = multiSSB;
cfBuffer->multiAMcoef = multiAMcoef;
cfBuffer->Alpha = doppler->Alpha;
cfBuffer->Delta = doppler->Delta;
cfBuffer->multiDetStates = multiDetStates ;
} /* if cfBuffer */
} /* could not reuse previously buffered quantites */
/* new orbital parameter corrections if not already buffered */
if ( doppler->asini > 0 )
{
/* compute binary time corrections to the SSB time delays and SSB time derivitive */
XLAL_CHECK ( XLALAddMultiBinaryTimes ( &multiBinary, multiSSB, doppler ) == XLAL_SUCCESS, XLAL_EFUNC );
multiSSBTotal = multiBinary;
}
else {
multiSSBTotal = multiSSB;
}
REAL8 Ad = multiAMcoef->Mmunu.Ad;
REAL8 Bd = multiAMcoef->Mmunu.Bd;
REAL8 Cd = multiAMcoef->Mmunu.Cd;
REAL8 Dd_inv = 1.0 / multiAMcoef->Mmunu.Dd;
REAL8 Ed = 0;
/* if requested, prepare for returning single-IFO F-stat vector */
if ( params->returnSingleF )
{
retF.numDetectors = numDetectors;
XLAL_CHECK ( numDetectors <= PULSAR_MAX_DETECTORS, XLAL_EINVAL, "numDetectors = %d exceeds currently allowed upper value (%d) for returnSingleF=TRUE\n", numDetectors, PULSAR_MAX_DETECTORS );
}
/* ----- loop over detectors and compute all detector-specific quantities ----- */
for ( UINT4 X=0; X < numDetectors; X ++)
{
Fcomponents FcX = empty_Fcomponents; /* for detector-specific FaX, FbX */
if ( (params->Dterms != DTERMS) || params->returnAtoms ) {
XLAL_CHECK ( XLALComputeFaFb (&FcX, multiSFTs->data[X], doppler->fkdot, multiSSBTotal->data[X], multiAMcoef->data[X], params) == XLAL_SUCCESS, XLAL_EFUNC );
} else {
XLAL_CHECK ( LocalXLALComputeFaFb (&FcX, multiSFTs->data[X], doppler->fkdot, multiSSBTotal->data[X], multiAMcoef->data[X], params) == XLAL_SUCCESS, XLAL_EFUNC );
}
if ( params->returnAtoms )
{
retF.multiFstatAtoms->data[X] = FcX.multiFstatAtoms->data[0]; /* copy pointer to IFO-specific Fstat-atoms 'contents' */
/* free 'container', but not *contents*, which have been linked above */
XLALFree ( FcX.multiFstatAtoms->data );
XLALFree ( FcX.multiFstatAtoms );
}
XLAL_CHECK ( isfinite(creal(FcX.Fa)) && isfinite(cimag(FcX.Fa)) && isfinite(creal(FcX.Fb)) && isfinite(cimag(FcX.Fb)), XLAL_EFPOVRFLW );
/* compute single-IFO F-stats, if requested */
if ( params->returnSingleF )
{
REAL8 AdX = multiAMcoef->data[X]->A;
REAL8 BdX = multiAMcoef->data[X]->B;
REAL8 CdX = multiAMcoef->data[X]->C;
REAL8 DdX_inv = 1.0 / multiAMcoef->data[X]->D;
REAL8 EdX = 0;
REAL8 FXa_re = creal(FcX.Fa);
REAL8 FXa_im = cimag(FcX.Fa);
REAL8 FXb_re = creal(FcX.Fb);
REAL8 FXb_im = cimag(FcX.Fb);
/* compute final single-IFO F-stat */
retF.FX[X] = DdX_inv * ( BdX * ( SQ(FXa_re) + SQ(FXa_im) )
+ AdX * ( SQ(FXb_re) + SQ(FXb_im) )
- 2.0 * CdX * ( FXa_re * FXb_re + FXa_im * FXb_im )
- 2.0 * EdX * ( - FXa_re * FXb_im + FXa_im * FXb_re ) // nonzero only in RAA case where Ed!=0
);
} /* if returnSingleF */
/* Fa = sum_X Fa_X */
retF.Fa += FcX.Fa;
/* Fb = sum_X Fb_X */
retF.Fb += FcX.Fb;
} /* for X < numDetectors */
/* ----- compute final Fstatistic-value ----- */
/* NOTE: the data MUST be normalized by the DOUBLE-SIDED PSD (using LALNormalizeMultiSFTVect),
* therefore there is a factor of 2 difference with respect to the equations in JKS, which
* where based on the single-sided PSD.
*/
REAL8 Fa_re = creal(retF.Fa);
REAL8 Fa_im = cimag(retF.Fa);
REAL8 Fb_re = creal(retF.Fb);
REAL8 Fb_im = cimag(retF.Fb);
retF.F = Dd_inv * ( Bd * ( SQ(Fa_re) + SQ(Fa_im) )
+ Ad * ( SQ(Fb_re) + SQ(Fb_im) )
- 2.0 * Cd * ( Fa_re * Fb_re + Fa_im * Fb_im )
- 2.0 * Ed * ( - Fa_re * Fb_im + Fa_im * Fb_re ) // nonzero only in RAA case where Ed!=0
);
/* set correct F-stat reference time (taken from template 'doppler') [relevant only for phase of {Fa,Fb}] */
retF.refTime = doppler->refTime;
/* free memory if no buffer was available */
if ( !cfBuffer )
{
XLALDestroyMultiSSBtimes ( multiSSB );
XLALDestroyMultiAMCoeffs ( multiAMcoef );
} /* if !cfBuffer */
/* this always needs to be free'ed, as it's no longer buffered */
XLALDestroyMultiSSBtimes ( multiBinary );
/* return final Fstat result */
(*Fstat) = retF;
return XLAL_SUCCESS;
} // ComputeFStat()
int main(int argc, char *argv[])
{
UserVariables_t XLAL_INIT_DECL(uvar);
XLAL_CHECK ( InitUserVars(&uvar, argc, argv) == XLAL_SUCCESS, XLAL_EFUNC );
MultiLALDetector *detectors = NULL;
XLAL_CHECK( (detectors = XLALMalloc(sizeof(MultiLALDetector))) != NULL, XLAL_ENOMEM );
detectors->length = uvar.IFO->length;
for (UINT4 ii=0; ii<detectors->length; ii++) {
if (strcmp("H1", uvar.IFO->data[ii])==0) {
detectors->sites[ii] = lalCachedDetectors[LAL_LHO_4K_DETECTOR]; //H1
} else if (strcmp("L1",uvar.IFO->data[ii])==0) {
detectors->sites[ii] = lalCachedDetectors[LAL_LLO_4K_DETECTOR]; //L1
} else if (strcmp("V1", uvar.IFO->data[ii])==0) {
detectors->sites[ii] = lalCachedDetectors[LAL_VIRGO_DETECTOR]; //V1
} else if (strcmp("H2", uvar.IFO->data[ii])==0) {
detectors->sites[ii] = lalCachedDetectors[LAL_LHO_2K_DETECTOR]; //H2
} else if (strcmp("H2r", uvar.IFO->data[ii])==0) {
LALDetector H2 = lalCachedDetectors[LAL_LHO_2K_DETECTOR]; //H2 rotated
H2.frDetector.xArmAzimuthRadians -= 0.25*LAL_PI;
H2.frDetector.yArmAzimuthRadians -= 0.25*LAL_PI;
memset(&(H2.frDetector.name), 0, sizeof(CHAR)*LALNameLength);
snprintf(H2.frDetector.name, LALNameLength, "%s", "LHO_2k_rotatedPiOver4");
XLAL_CHECK( (XLALCreateDetector(&(detectors->sites[ii]), &(H2.frDetector), LALDETECTORTYPE_IFODIFF)) != NULL, XLAL_EFUNC );
} else {
XLAL_ERROR(XLAL_EINVAL, "Not using valid interferometer! Expected 'H1', 'H2', 'H2r' (rotated H2), 'L1', or 'V1' not %s.\n", uvar.IFO->data[ii]);
}
}
EphemerisData *edat = NULL;
XLAL_CHECK( (edat = XLALInitBarycenter(uvar.ephemEarth, uvar.ephemSun)) != NULL, XLAL_EFUNC );
LIGOTimeGPS tStart;
XLALGPSSetREAL8 ( &tStart, uvar.t0 );
XLAL_CHECK( xlalErrno == 0, XLAL_EFUNC, "XLALGPSSetREAL8 failed\n" );
MultiLIGOTimeGPSVector *multiTimestamps = NULL;
XLAL_CHECK( (multiTimestamps = XLALMakeMultiTimestamps(tStart, uvar.Tobs, uvar.Tsft, uvar.SFToverlap, detectors->length)) != NULL, XLAL_EFUNC );
LIGOTimeGPS refTime = multiTimestamps->data[0]->data[0];
MultiDetectorStateSeries *multiStateSeries = NULL;
XLAL_CHECK( (multiStateSeries = XLALGetMultiDetectorStates(multiTimestamps, detectors, edat, uvar.SFToverlap)) != NULL, XLAL_EFUNC );
gsl_rng *rng = NULL;
XLAL_CHECK( (rng = gsl_rng_alloc(gsl_rng_mt19937)) != NULL, XLAL_EFUNC );
gsl_rng_set(rng, 0);
FILE *OUTPUT;
XLAL_CHECK( (OUTPUT = fopen(uvar.outfilename,"w")) != NULL, XLAL_EIO, "Output file %s could not be opened\n", uvar.outfilename );
for (INT4 n=0; n<uvar.skylocations; n++) {
SkyPosition skypos;
if (XLALUserVarWasSet(&(uvar.alpha)) && XLALUserVarWasSet(&(uvar.delta)) && n==0) {
skypos.longitude = uvar.alpha;
skypos.latitude = uvar.delta;
skypos.system = COORDINATESYSTEM_EQUATORIAL;
} else {
skypos.longitude = LAL_TWOPI*gsl_rng_uniform(rng);
skypos.latitude = LAL_PI*gsl_rng_uniform(rng) - LAL_PI_2;
skypos.system = COORDINATESYSTEM_EQUATORIAL;
}
REAL8 cosi0, psi0;
if (XLALUserVarWasSet(&(uvar.cosi)) && n==0) cosi0 = uvar.cosi;
else cosi0 = 2.0*gsl_rng_uniform(rng) - 1.0;
if (XLALUserVarWasSet(&(uvar.psi)) && n==0) psi0 = uvar.psi;
else psi0 = LAL_PI*gsl_rng_uniform(rng);
MultiAMCoeffs *multiAMcoefficients = NULL;
XLAL_CHECK( (multiAMcoefficients = XLALComputeMultiAMCoeffs(multiStateSeries, NULL, skypos)) != NULL, XLAL_EFUNC );
MultiSSBtimes *multissb = NULL;
XLAL_CHECK( (multissb = XLALGetMultiSSBtimes(multiStateSeries, skypos, refTime, SSBPREC_RELATIVISTICOPT)) != NULL, XLAL_EFUNC );
REAL8 frequency0 = 1000.0 + (gsl_rng_uniform(rng)-0.5)/uvar.Tsft;
REAL8 frequency = 1000.0;
for (UINT4 ii=0; ii<multiAMcoefficients->data[0]->a->length; ii++) {
REAL4 Fplus0 = multiAMcoefficients->data[0]->a->data[ii]*cos(2.0*psi0) + multiAMcoefficients->data[0]->b->data[ii]*sin(2.0*psi0);
REAL4 Fcross0 = multiAMcoefficients->data[0]->b->data[ii]*cos(2.0*psi0) - multiAMcoefficients->data[0]->a->data[ii]*sin(2.0*psi0);
REAL4 Fplus1 = multiAMcoefficients->data[1]->a->data[ii]*cos(2.0*psi0) + multiAMcoefficients->data[1]->b->data[ii]*sin(2.0*psi0);
REAL4 Fcross1 = multiAMcoefficients->data[1]->b->data[ii]*cos(2.0*psi0) - multiAMcoefficients->data[1]->a->data[ii]*sin(2.0*psi0);
COMPLEX16 RatioTerm0 = crect(0.5*Fplus1*(1.0+cosi0*cosi0), Fcross1*cosi0)/crect(0.5*Fplus0*(1.0+cosi0*cosi0), Fcross0*cosi0);
REAL4 detPhaseArg = 0.0, detPhaseMag = 0.0;
BOOLEAN loopbroken = 0;
for (INT4 jj=0; jj<50 && !loopbroken; jj++) {
REAL4 psi = 0.02*jj*LAL_PI;
Fplus0 = multiAMcoefficients->data[0]->a->data[ii]*cos(2.0*psi) + multiAMcoefficients->data[0]->b->data[ii]*sin(2.0*psi);
Fcross0 = multiAMcoefficients->data[0]->b->data[ii]*cos(2.0*psi) - multiAMcoefficients->data[0]->a->data[ii]*sin(2.0*psi);
Fplus1 = multiAMcoefficients->data[1]->a->data[ii]*cos(2.0*psi) + multiAMcoefficients->data[1]->b->data[ii]*sin(2.0*psi);
Fcross1 = multiAMcoefficients->data[1]->b->data[ii]*cos(2.0*psi) - multiAMcoefficients->data[1]->a->data[ii]*sin(2.0*psi);
for (INT4 kk=0; kk<51 && !loopbroken; kk++) {
//REAL4 cosi = 1.0 - 2.0*0.02*kk;
REAL4 cosi;
if (cosi0<0.0) cosi = -0.02*kk;
else cosi = 0.02*kk;
COMPLEX16 complexnumerator = crect(0.5*Fplus1*(1.0+cosi*cosi), Fcross1*cosi);
COMPLEX16 complexdenominator = crect(0.5*Fplus0*(1.0+cosi*cosi) , Fcross0*cosi);
if (cabs(complexdenominator)>1.0e-7) {
COMPLEX16 complexval = complexnumerator/complexdenominator;
detPhaseMag += fmin(cabs(complexval), 10.0);
detPhaseArg += gsl_sf_angle_restrict_pos(carg(complexval));
} else {
loopbroken = 1;
detPhaseMag = 0.0;
detPhaseArg = 0.0;
}
}
}
detPhaseMag /= 2550.0;
detPhaseArg /= 2550.0;
REAL8 timediff0 = multissb->data[0]->DeltaT->data[ii] - 0.5*uvar.Tsft*multissb->data[0]->Tdot->data[ii];
REAL8 timediff1 = multissb->data[1]->DeltaT->data[ii] - 0.5*uvar.Tsft*multissb->data[1]->Tdot->data[ii];
REAL8 tau = timediff1 - timediff0;
REAL8 freqshift0 = -LAL_TWOPI*tau*frequency0;
REAL8 freqshift = -LAL_TWOPI*tau*frequency;
REAL8 nearestFrequency = round(multissb->data[0]->Tdot->data[ii]*frequency*uvar.Tsft)/uvar.Tsft;
COMPLEX16 dirichlet0 = conj(DirichletKernelLargeNHann((multissb->data[1]->Tdot->data[ii]*frequency0-nearestFrequency)*uvar.Tsft)/DirichletKernelLargeNHann((multissb->data[0]->Tdot->data[ii]*frequency0-nearestFrequency)*uvar.Tsft));
COMPLEX16 dirichlet = conj(DirichletKernelLargeNHann((multissb->data[1]->Tdot->data[ii]*frequency-nearestFrequency)*uvar.Tsft)/DirichletKernelLargeNHann((multissb->data[0]->Tdot->data[ii]*frequency-nearestFrequency)*uvar.Tsft));
COMPLEX16 signal0 = 0.5*crect(0.5*Fplus0*(1.0+cosi0*cosi0), Fcross0*cosi0)*cpolar(1.0, LAL_TWOPI*frequency0*0.5*uvar.Tsft+LAL_TWOPI*frequency0*(multissb->data[0]->DeltaT->data[ii]+multissb->data[0]->Tdot->data[ii]*0.5*uvar.Tsft))*uvar.Tsft*DirichletKernelLargeNHann((multissb->data[0]->Tdot->data[ii]*frequency0-nearestFrequency)*uvar.Tsft);
COMPLEX16 signal1 = 0.5*crect(0.5*Fplus1*(1.0+cosi0*cosi0), Fcross1*cosi0)*cpolar(1.0, LAL_TWOPI*frequency0*0.5*uvar.Tsft+LAL_TWOPI*frequency0*(multissb->data[1]->DeltaT->data[ii]+multissb->data[1]->Tdot->data[ii]*0.5*uvar.Tsft))*uvar.Tsft*DirichletKernelLargeNHann((multissb->data[1]->Tdot->data[ii]*frequency0-nearestFrequency)*uvar.Tsft);
fprintf(OUTPUT, "%g %g %g %g %g %g %g %g %g %g %g %g %g %g\n", cabs(signal0), gsl_sf_angle_restrict_pos(carg(signal0)), cabs(signal1), gsl_sf_angle_restrict_pos(carg(signal1)), cabs(RatioTerm0), gsl_sf_angle_restrict_pos(carg(RatioTerm0)), detPhaseMag, detPhaseArg, freqshift0, freqshift, cabs(dirichlet0), gsl_sf_angle_restrict_pos(carg(dirichlet0)), cabs(dirichlet), gsl_sf_angle_restrict_pos(carg(dirichlet)));
//fprintf(OUTPUT, "%g %g %g %g\n", cabs(signal0), gsl_sf_angle_restrict_pos(carg(signal0)), cabs(signal1), gsl_sf_angle_restrict_pos(carg(signal1)));
}
XLALDestroyMultiAMCoeffs(multiAMcoefficients);
XLALDestroyMultiSSBtimes(multissb);
}
fclose(OUTPUT);
gsl_rng_free(rng);
XLALDestroyMultiDetectorStateSeries(multiStateSeries);
XLALDestroyMultiTimestamps(multiTimestamps);
XLALDestroyEphemerisData(edat);
XLALFree(detectors);
XLALDestroyUserVars();
}
/** Initialized Fstat-code: handle user-input and set everything up. */
void
InitPFS ( LALStatus *status, ConfigVariables *cfg, const UserInput_t *uvar )
{
static const char *fn = "InitPFS()";
SFTCatalog *catalog = NULL;
SFTConstraints constraints = empty_SFTConstraints;
SkyPosition skypos;
LIGOTimeGPS startTime, endTime;
REAL8 duration, Tsft;
LIGOTimeGPS minStartTimeGPS, maxEndTimeGPS;
EphemerisData *edat = NULL; /* ephemeris data */
MultiAMCoeffs *multiAMcoef = NULL;
MultiPSDVector *multiRngmed = NULL;
MultiNoiseWeights *multiNoiseWeights = NULL;
MultiSFTVector *multiSFTs = NULL; /* multi-IFO SFT-vectors */
MultiDetectorStateSeries *multiDetStates = NULL; /* pos, vel and LMSTs for detector at times t_i */
UINT4 X, i;
INITSTATUS(status);
ATTATCHSTATUSPTR (status);
{ /* Check user-input consistency */
BOOLEAN have_h0, have_cosi, have_cosiota, have_Ap, have_Ac;
REAL8 cosi = 0;
have_h0 = LALUserVarWasSet ( &uvar->h0 );
have_cosi = LALUserVarWasSet ( &uvar->cosi );
have_cosiota = LALUserVarWasSet ( &uvar->cosiota );
have_Ap = LALUserVarWasSet ( &uvar->aPlus );
have_Ac = LALUserVarWasSet ( &uvar->aCross );
/* ----- handle cosi/cosiota ambiguity */
if ( (have_cosi && have_cosiota) ) {
LogPrintf (LOG_CRITICAL, "Need EITHER --cosi [preferred] OR --cosiota [deprecated]!\n");
ABORT ( status, PREDICTFSTAT_EINPUT, PREDICTFSTAT_MSGEINPUT );
}
if ( have_cosiota ) {
cosi = uvar->cosiota;
have_cosi = TRUE;
}
else if ( have_cosi ) {
cosi = uvar->cosi;
have_cosi = TRUE;
}
/* ----- handle {h0,cosi} || {aPlus,aCross} freedom ----- */
if ( ( have_h0 && !have_cosi ) || ( !have_h0 && have_cosi ) )
{
LogPrintf (LOG_CRITICAL, "Need both (h0, cosi) to specify signal!\n");
ABORT ( status, PREDICTFSTAT_EINPUT, PREDICTFSTAT_MSGEINPUT );
}
if ( ( have_Ap && !have_Ac) || ( !have_Ap && have_Ac ) )
{
LogPrintf (LOG_CRITICAL, "Need both (aPlus, aCross) to specify signal!\n");
ABORT ( status, PREDICTFSTAT_EINPUT, PREDICTFSTAT_MSGEINPUT );
}
if ( have_h0 && have_Ap )
{
LogPrintf (LOG_CRITICAL, "Overdetermined: specify EITHER (h0,cosi) OR (aPlus,aCross)!\n");
ABORT ( status, PREDICTFSTAT_EINPUT, PREDICTFSTAT_MSGEINPUT );
}
/* ----- internally we always use Aplus, Across */
if ( have_h0 )
{
cfg->aPlus = 0.5 * uvar->h0 * ( 1.0 + SQ( cosi) );
cfg->aCross = uvar->h0 * uvar->cosi;
}
else
{
cfg->aPlus = uvar->aPlus;
cfg->aCross = uvar->aCross;
}
}/* check user-input */
/* ----- prepare SFT-reading ----- */
if ( LALUserVarWasSet ( &uvar->IFO ) )
if ( (constraints.detector = XLALGetChannelPrefix ( uvar->IFO )) == NULL ) {
ABORT ( status, PREDICTFSTAT_EINPUT, PREDICTFSTAT_MSGEINPUT);
}
minStartTimeGPS.gpsSeconds = uvar->minStartTime;
minStartTimeGPS.gpsNanoSeconds = 0;
maxEndTimeGPS.gpsSeconds = uvar->maxEndTime;
maxEndTimeGPS.gpsNanoSeconds = 0;
constraints.minStartTime = &minStartTimeGPS;
constraints.maxEndTime = &maxEndTimeGPS;
/* ----- get full SFT-catalog of all matching (multi-IFO) SFTs */
LogPrintf (LOG_DEBUG, "Finding all SFTs to load ... ");
TRY ( LALSFTdataFind ( status->statusPtr, &catalog, uvar->DataFiles, &constraints ), status);
LogPrintfVerbatim (LOG_DEBUG, "done. (found %d SFTs)\n", catalog->length);
if ( constraints.detector )
LALFree ( constraints.detector );
if ( catalog->length == 0 )
{
LogPrintf (LOG_CRITICAL, "No matching SFTs for pattern '%s'!\n", uvar->DataFiles );
ABORT ( status, PREDICTFSTAT_EINPUT, PREDICTFSTAT_MSGEINPUT);
}
/* ----- deduce start- and end-time of the observation spanned by the data */
{
GV.numSFTs = catalog->length; /* total number of SFTs */
Tsft = 1.0 / catalog->data[0].header.deltaF;
startTime = catalog->data[0].header.epoch;
endTime = catalog->data[GV.numSFTs-1].header.epoch;
XLALGPSAdd(&endTime, Tsft);
duration = GPS2REAL8(endTime) - GPS2REAL8 (startTime);
}
{ /* ----- load ephemeris-data ----- */
edat = XLALInitBarycenter( uvar->ephemEarth, uvar->ephemSun );
if ( !edat ) {
XLALPrintError("XLALInitBarycenter failed: could not load Earth ephemeris '%s' and Sun ephemeris '%s'\n", uvar->ephemEarth, uvar->ephemSun);
ABORT ( status, PREDICTFSTAT_EINPUT, PREDICTFSTAT_MSGEINPUT);
}
}
{/* ----- load the multi-IFO SFT-vectors ----- */
UINT4 wings = uvar->RngMedWindow/2 + 10; /* extra frequency-bins needed for rngmed */
REAL8 fMax = uvar->Freq + 1.0 * wings / Tsft;
REAL8 fMin = uvar->Freq - 1.0 * wings / Tsft;
LogPrintf (LOG_DEBUG, "Loading SFTs ... ");
TRY ( LALLoadMultiSFTs ( status->statusPtr, &multiSFTs, catalog, fMin, fMax ), status );
LogPrintfVerbatim (LOG_DEBUG, "done.\n");
TRY ( LALDestroySFTCatalog ( status->statusPtr, &catalog ), status );
}
TRY ( LALNormalizeMultiSFTVect (status->statusPtr, &multiRngmed, multiSFTs, uvar->RngMedWindow ), status);
TRY ( LALComputeMultiNoiseWeights (status->statusPtr, &multiNoiseWeights, multiRngmed, uvar->RngMedWindow, 0 ), status );
/* correctly handle the --SignalOnly case:
* set noise-weights to 1, and
* set Sh->1 (single-sided)
*/
if ( uvar->SignalOnly )
{
multiNoiseWeights->Sinv_Tsft = Tsft;
for ( X=0; X < multiNoiseWeights->length; X ++ )
for ( i=0; i < multiNoiseWeights->data[X]->length; i ++ )
multiNoiseWeights->data[X]->data[i] = 1.0;
}
/* ----- handle transient-signal window if given ----- */
if ( LALUserVarWasSet ( &uvar->transientWindowType ) && strcmp ( uvar->transientWindowType, "none") )
{
transientWindow_t transientWindow; /**< properties of transient-signal window */
MultiLIGOTimeGPSVector *mTS;
if ( !strcmp ( uvar->transientWindowType, "rect" ) )
transientWindow.type = TRANSIENT_RECTANGULAR; /* rectangular window [t0, t0+tau] */
else if ( !strcmp ( uvar->transientWindowType, "exp" ) )
transientWindow.type = TRANSIENT_EXPONENTIAL; /* exponential decay window e^[-(t-t0)/tau for t>t0, 0 otherwise */
else
{
XLALPrintError ("Illegal transient window '%s' specified: valid are 'none', 'rect' or 'exp'\n", uvar->transientWindowType);
ABORT ( status, PREDICTFSTAT_EINPUT, PREDICTFSTAT_MSGEINPUT );
}
if ( LALUserVarWasSet ( &uvar->transientStartTime ) )
transientWindow.t0 = uvar->transientStartTime;
else
transientWindow.t0 = XLALGPSGetREAL8( &startTime ); /* if not set, default window startTime == startTime here */
transientWindow.tau = uvar->transientTauDays;
if ( (mTS = XLALExtractMultiTimestampsFromSFTs ( multiSFTs )) == NULL ) {
XLALPrintError ("%s: failed to XLALExtractMultiTimestampsFromSFTs() from SFTs. xlalErrno = %d.\n", fn, xlalErrno );
ABORT ( status, PREDICTFSTAT_EXLAL, PREDICTFSTAT_MSGEXLAL );
}
if ( XLALApplyTransientWindow2NoiseWeights ( multiNoiseWeights, mTS, transientWindow ) != XLAL_SUCCESS ) {
XLALPrintError ("%s: XLALApplyTransientWindow2NoiseWeights() failed! xlalErrno = %d\n", fn, xlalErrno );
ABORT ( status, PREDICTFSTAT_EXLAL, PREDICTFSTAT_MSGEXLAL );
}
XLALDestroyMultiTimestamps ( mTS );
} /* apply transient window to noise-weights */
/* ----- obtain the (multi-IFO) 'detector-state series' for all SFTs ----- */
TRY (LALGetMultiDetectorStates( status->statusPtr, &multiDetStates, multiSFTs, edat), status );
/* normalize skyposition: correctly map into [0,2pi]x[-pi/2,pi/2] */
skypos.longitude = uvar->Alpha;
skypos.latitude = uvar->Delta;
skypos.system = COORDINATESYSTEM_EQUATORIAL;
TRY (LALNormalizeSkyPosition ( status->statusPtr, &skypos, &skypos), status);
TRY ( LALGetMultiAMCoeffs ( status->statusPtr, &multiAMcoef, multiDetStates, skypos ), status);
/* noise-weighting of Antenna-patterns and compute A,B,C */
if ( XLALWeightMultiAMCoeffs ( multiAMcoef, multiNoiseWeights ) != XLAL_SUCCESS ) {
LogPrintf (LOG_CRITICAL, "XLALWeightMultiAMCoeffs() failed with error = %d\n\n", xlalErrno );
ABORT ( status, PREDICTFSTAT_EXLAL, PREDICTFSTAT_MSGEXLAL );
}
/* OK: we only need the antenna-pattern matrix M_mu_nu */
cfg->Mmunu = multiAMcoef->Mmunu;
/* ----- produce a log-string describing the data-specific setup ----- */
{
struct tm utc;
time_t tp;
CHAR dateStr[512], line[512], summary[1024];
UINT4 j, numDet;
numDet = multiSFTs->length;
tp = time(NULL);
sprintf (summary, "%%%% Date: %s", asctime( gmtime( &tp ) ) );
strcat (summary, "%% Loaded SFTs: [ " );
for ( j=0; j < numDet; j ++ ) {
sprintf (line, "%s:%d%s", multiSFTs->data[j]->data->name, multiSFTs->data[j]->length,
(j < numDet - 1)?", ":" ]\n");
strcat ( summary, line );
}
utc = *XLALGPSToUTC( &utc, (INT4)GPS2REAL8(startTime) );
strcpy ( dateStr, asctime(&utc) );
dateStr[ strlen(dateStr) - 1 ] = 0;
sprintf (line, "%%%% Start GPS time tStart = %12.3f (%s GMT)\n", GPS2REAL8(startTime), dateStr);
strcat ( summary, line );
sprintf (line, "%%%% Total time spanned = %12.3f s (%.1f hours)\n", duration, duration/3600 );
strcat ( summary, line );
if ( (cfg->dataSummary = LALCalloc(1, strlen(summary) + 1 )) == NULL ) {
ABORT (status, PREDICTFSTAT_EMEM, PREDICTFSTAT_MSGEMEM);
}
strcpy ( cfg->dataSummary, summary );
LogPrintfVerbatim( LOG_DEBUG, cfg->dataSummary );
} /* write dataSummary string */
/* free everything not needed any more */
TRY ( LALDestroyMultiPSDVector (status->statusPtr, &multiRngmed ), status );
TRY ( LALDestroyMultiNoiseWeights (status->statusPtr, &multiNoiseWeights ), status );
TRY ( LALDestroyMultiSFTVector (status->statusPtr, &multiSFTs ), status );
XLALDestroyMultiDetectorStateSeries ( multiDetStates );
XLALDestroyMultiAMCoeffs ( multiAMcoef );
/* Free ephemeris data */
XLALDestroyEphemerisData (edat);
DETATCHSTATUSPTR (status);
RETURN (status);
} /* InitPFS() */
/* ----- function definitions ---------- */
int main(int argc, char *argv[])
{
int opt; /* Command-line option. */
UINT4 numIFOs = 2;
const CHAR *sites[2] = {"H1", "V1"};
UINT4 startTime = 714180733;
UINT4 duration = 180000; /* 50 hours */
UINT4 Tsft = 1800; /* assume 30min SFTs */
REAL8 tolerance = 2e-6; /* same algorithm, should be basically identical results */
char earthEphem[] = TEST_DATA_DIR "earth00-19-DE405.dat.gz";
char sunEphem[] = TEST_DATA_DIR "sun00-19-DE405.dat.gz";
UINT4 numChecks = 1; /* Number of times to check */
/* read user input */
while ((opt = LALgetopt( argc, argv, "n:qv:" )) != -1) {
switch (opt) {
case 'v': /* set lalDebugLevel */
break;
case 'n': /* number of times to check */
numChecks = atoi( LALoptarg );
break;
}
}
/* init random-generator */
struct tms buf;
UINT4 seed = times(&buf);
srand ( seed );
XLALPrintInfo ("%s: seed used = %d\n", __func__, seed );
/* ----- init ephemeris ----- */
EphemerisData *edat;
if ( (edat = XLALInitBarycenter ( earthEphem, sunEphem )) == NULL ) {
XLALPrintError ("%s: XLALInitBarycenter() failed with xlalErrno = %d\n", __func__, xlalErrno );
return XLAL_EFAILED;
}
/* ----- init detector info ---------- */
UINT4 X;
MultiLALDetector multiDet;
multiDet.length = numIFOs;
for (X=0; X < numIFOs; X ++ )
{
LALDetector *site;
if ( (site = XLALGetSiteInfo ( sites[X] )) == NULL ) {
XLALPrintError ("%s: Failed to get site-info for detector '%s'\n", __func__, sites[X] );
return XLAL_EFAILED;
}
multiDet.sites[X] = (*site); /* copy! */
XLALFree ( site );
}
/* ----- init multi-IFO timestamps vector ---------- */
UINT4 numSteps = (UINT4) ceil ( duration / Tsft );
MultiLIGOTimeGPSVector * multiTS;
if ( (multiTS = XLALCalloc ( 1, sizeof(*multiTS))) == NULL ) {
XLAL_ERROR ( XLAL_ENOMEM );
}
multiTS->length = numIFOs;
if ( (multiTS->data = XLALCalloc (numIFOs, sizeof(*multiTS->data))) == NULL ) {
XLAL_ERROR ( XLAL_ENOMEM );
}
for ( X=0; X < numIFOs; X ++ )
{
if ( (multiTS->data[X] = XLALCreateTimestampVector (numSteps)) == NULL ) {
XLALPrintError ("%s: XLALCreateTimestampVector(%d) failed.\n", __func__, numSteps );
return XLAL_EFAILED;
}
multiTS->data[X]->deltaT = Tsft;
UINT4 i;
for ( i=0; i < numSteps; i ++ )
{
UINT4 ti = startTime + i * Tsft;
multiTS->data[X]->data[i].gpsSeconds = ti;
multiTS->data[X]->data[i].gpsNanoSeconds = 0;
} /* for i < numSteps */
} /* for X < numIFOs */
/* ---------- compute multi-detector states -------------------- */
MultiDetectorStateSeries *multiDetStates;
if ( (multiDetStates = XLALGetMultiDetectorStates ( multiTS, &multiDet, edat, 0.5 * Tsft )) == NULL ) {
XLALPrintError ( "%s: XLALGetMultiDetectorStates() failed.\n", __func__ );
return XLAL_EFAILED;
}
XLALDestroyMultiTimestamps ( multiTS );
XLALDestroyEphemerisData ( edat );
/* ========== MAIN LOOP: N-trials of comparisons XLAL <--> LAL multiAM functions ========== */
while ( numChecks-- )
{
LALStatus XLAL_INIT_DECL(status);
/* ----- pick skyposition at random ----- */
SkyPosition skypos;
skypos.longitude = LAL_TWOPI * (1.0 * rand() / ( RAND_MAX + 1.0 ) ); /* uniform in [0, 2pi) */
skypos.latitude = LAL_PI_2 - acos ( 1 - 2.0 * rand()/RAND_MAX ); /* sin(delta) uniform in [-1,1] */
skypos.system = COORDINATESYSTEM_EQUATORIAL;
MultiNoiseWeights *weights = NULL; /* for now we only deal with unit-weights case */
/* ----- compute multiAM using LAL function ----- */
MultiAMCoeffs *multiAM_LAL = NULL;
LALGetMultiAMCoeffs ( &status, &multiAM_LAL, multiDetStates, skypos );
if ( status.statusCode ) {
XLALPrintError ("%s: LALGetMultiAMCoeffs() failed with statusCode = %d : %s\n", __func__, status.statusCode, status.statusDescription );
return XLAL_EFAILED;
}
if ( XLALWeightMultiAMCoeffs ( multiAM_LAL, weights ) != XLAL_SUCCESS ) {
XLALPrintError ("%s: XLALWeightMultiAMCoeffs() failed with xlalErrno = %d\n", __func__, xlalErrno );
return XLAL_EFAILED;
}
/* ----- compute multiAM using XLAL function ----- */
MultiAMCoeffs *multiAM_XLAL;
if ( ( multiAM_XLAL = XLALComputeMultiAMCoeffs ( multiDetStates, weights, skypos )) == NULL ) {
XLALPrintError ("%s: XLALComputeMultiAMCoeffs() failed with xlalErrno = %d\n", __func__, xlalErrno );
return XLAL_EFAILED;
}
/* now run comparison */
if ( XLALCompareMultiAMCoeffs ( multiAM_XLAL, multiAM_LAL, tolerance ) != XLAL_SUCCESS ) {
XLALPrintError ("%s: comparison between multiAM_XLAL and multiAM_LAL failed.\n", __func__ );
return XLAL_EFAILED;
}
/* free memory created inside this loop */
XLALDestroyMultiAMCoeffs ( multiAM_LAL );
XLALDestroyMultiAMCoeffs ( multiAM_XLAL );
} /* for numChecks */
/* we're done: free memory */
XLALDestroyMultiDetectorStateSeries ( multiDetStates );
LALCheckMemoryLeaks();
printf ("OK. All tests passed successfully\n\n");
return 0; /* OK */
} /* main() */
/**
* Generates a multi-Fstat atoms vector for given parameters, drawing random parameters wherever required.
*
* Input: detector states, signal sky-pos (or allsky), amplitudes (or range), transient window range
*
*/
MultiFstatAtomVector *
XLALSynthesizeTransientAtoms ( InjParams_t *injParamsOut, /**< [out] return summary of injected signal parameters (can be NULL) */
SkyPosition skypos, /**< (Alpha,Delta,system). Use Alpha < 0 to signal 'allsky' */
AmplitudePrior_t AmpPrior, /**< [in] amplitude-parameter priors to draw signals from */
transientWindowRange_t transientInjectRange, /**< transient-window range for injections (flat priors) */
const MultiDetectorStateSeries *multiDetStates, /**< [in] multi-detector state series covering observation time */
BOOLEAN SignalOnly, /**< [in] switch to generate signal draws without noise */
multiAMBuffer_t *multiAMBuffer, /**< [in/out] buffer for AM-coefficients if re-using same skyposition (must be !=NULL) */
gsl_rng *rng, /**< [in/out] gsl random-number generator */
INT4 lineX, /**< [in] if >= 0: generate signal only for detector 'lineX': must be within 0,...(Ndet-1) */
const MultiNoiseWeights *multiNoiseWeights /** [in] per-detector noise weights SX^-1/S^-1, no per-SFT variation (can be NULL for unit weights) */
)
{
/* check input */
XLAL_CHECK_NULL ( rng && multiAMBuffer && multiDetStates, XLAL_EINVAL, "Invalid NULL input!\n");
XLAL_CHECK_NULL ( !multiNoiseWeights || multiNoiseWeights->data, XLAL_EINVAL, "Invalid NULL input for multiNoiseWeights->data!\n" );
/* ----- if Alpha < 0 ==> draw skyposition isotropically from all-sky */
if ( skypos.longitude < 0 )
{
skypos.longitude = gsl_ran_flat ( rng, 0, LAL_TWOPI ); /* alpha uniform in [ 0, 2pi ] */
skypos.latitude = acos ( gsl_ran_flat ( rng, -1, 1 ) ) - LAL_PI_2; /* cos(delta) uniform in [ -1, 1 ] */
skypos.system = COORDINATESYSTEM_EQUATORIAL;
/* never re-using buffered AM-coeffs here, as we randomly draw new skypositions */
if ( multiAMBuffer->multiAM ) XLALDestroyMultiAMCoeffs ( multiAMBuffer->multiAM );
multiAMBuffer->multiAM = NULL;
} /* if random skypos to draw */
else /* otherwise: re-use AM-coeffs if already computed, or initialize them if for the first time */
{
if ( multiAMBuffer->multiAM )
if ( multiAMBuffer->skypos.longitude != skypos.longitude ||
multiAMBuffer->skypos.latitude != skypos.latitude ||
multiAMBuffer->skypos.system != skypos.system )
{
XLALDestroyMultiAMCoeffs ( multiAMBuffer->multiAM );
multiAMBuffer->multiAM = NULL;
}
} /* if single skypos given */
/* ----- generate antenna-pattern functions for this sky-position */
if ( !multiAMBuffer->multiAM && (multiAMBuffer->multiAM = XLALComputeMultiAMCoeffs ( multiDetStates, multiNoiseWeights, skypos )) == NULL ) {
XLALPrintError ( "%s: XLALComputeMultiAMCoeffs() failed with xlalErrno = %d\n", __func__, xlalErrno );
XLAL_ERROR_NULL ( XLAL_EFUNC );
}
multiAMBuffer->skypos = skypos; /* store buffered skyposition */
/* ----- generate a pre-initialized F-stat atom vector containing only the antenna-pattern coefficients */
MultiFstatAtomVector *multiAtoms;
if ( (multiAtoms = XLALGenerateMultiFstatAtomVector ( multiDetStates, multiAMBuffer->multiAM )) == NULL ) {
XLALPrintError ( "%s: XLALGenerateMultiFstatAtomVector() failed with xlalErrno = %d\n", __func__, xlalErrno );
XLAL_ERROR_NULL ( XLAL_EFUNC );
}
/* ----- draw amplitude vector A^mu from given ranges in {h0, cosi, psi, phi0} */
PulsarAmplitudeParams Amp;
if ( AmpPrior.fixedSNR > 0 ) /* special treatment of fixed-SNR: use h0=1, later rescale signal */
Amp.h0 = 1.0;
else if ( AmpPrior.fixedSNR == 0 )/* same as setting h0 = 0 */
Amp.h0 = 0;
else /* otherwise, draw from h0-prior */
Amp.h0 = XLALDrawFromPDF1D ( AmpPrior.pdf_h0Nat, rng );
Amp.cosi = XLALDrawFromPDF1D ( AmpPrior.pdf_cosi, rng );
Amp.psi = XLALDrawFromPDF1D ( AmpPrior.pdf_psi, rng );
Amp.phi0 = XLALDrawFromPDF1D ( AmpPrior.pdf_phi0, rng );
/* convert amplitude params to 'canonical' vector coordinates */
PulsarAmplitudeVect A_Mu;
if ( XLALAmplitudeParams2Vect ( A_Mu, Amp ) != XLAL_SUCCESS ) {
XLALPrintError ("%s: XLALAmplitudeParams2Vect() failed with xlalErrno = %d\n", __func__, xlalErrno );
XLAL_ERROR_NULL ( XLAL_EFUNC );
}
/* ----- draw transient-window parameters from given ranges using flat priors */
transientWindow_t XLAL_INIT_DECL(injectWindow);
injectWindow.type = transientInjectRange.type;
if ( injectWindow.type != TRANSIENT_NONE ) /* nothing to be done if no window */
{
injectWindow.t0 = (UINT4) gsl_ran_flat ( rng, transientInjectRange.t0, transientInjectRange.t0 + transientInjectRange.t0Band );
injectWindow.tau = (UINT4) gsl_ran_flat ( rng, transientInjectRange.tau, transientInjectRange.tau + transientInjectRange.tauBand );
}
/* ----- add transient signal to the Fstat atoms */
AntennaPatternMatrix M_mu_nu;
REAL8 rho2 = XLALAddSignalToMultiFstatAtomVector ( multiAtoms, &M_mu_nu, A_Mu, injectWindow, lineX );
if ( xlalErrno ) {
XLALPrintError ( "%s: XLALAddSignalToMultiFstatAtomVector() failed with xlalErrno = %d\n", __func__, xlalErrno );
XLAL_ERROR_NULL ( XLAL_EFUNC );
}
/* ----- special signal rescaling if 1) fixedSNR OR 2) fixed rhohMax */
REAL8 detM1o8 = sqrt ( M_mu_nu.Sinv_Tsft ) * pow ( M_mu_nu.Dd, 0.25 ); // (detM)^(1/8) = sqrt(Tsft/Sn) * (Dp)^(1/4)
/* 1) if fixedSNR signal is requested: rescale everything to the desired SNR now */
if ( (AmpPrior.fixedSNR > 0) || AmpPrior.fixRhohMax )
{
if ( (AmpPrior.fixedSNR > 0) && AmpPrior.fixRhohMax ) { /* double-check consistency: only one is allowed */
XLALPrintError ("%s: Something went wrong: both [fixedSNR = %f > 0] and [fixedRhohMax==true] are not allowed!\n", __func__, AmpPrior.fixedSNR );
XLAL_ERROR_NULL ( XLAL_EDOM );
}
REAL8 rescale = 1.0;
if ( AmpPrior.fixedSNR > 0 )
rescale = AmpPrior.fixedSNR / sqrt(rho2); // rescale atoms by this factor, such that SNR = fixedSNR
if ( AmpPrior.fixRhohMax )
rescale = 1.0 / detM1o8; // we drew h0 in [0, rhohMax], so we now need to rescale as h0Max = rhohMax/(detM)^(1/8)
if ( XLALRescaleMultiFstatAtomVector ( multiAtoms, rescale ) != XLAL_SUCCESS ) { /* rescale atoms */
XLALPrintError ( "%s: XLALRescaleMultiFstatAtomVector() failed with xlalErrno = %d\n", __func__, xlalErrno );
XLAL_ERROR_NULL ( XLAL_EFUNC );
}
Amp.h0 *= rescale; /* rescale amplitude-params for consistency */
UINT4 i; for (i=0; i < 4; i ++) A_Mu[i] *= rescale;
rho2 *= SQ(rescale); /* rescale reported optimal SNR */
} /* if fixedSNR > 0 OR fixedRhohMax */
/* ----- add noise to the Fstat atoms, unless --SignalOnly was specified */
if ( !SignalOnly )
if ( XLALAddNoiseToMultiFstatAtomVector ( multiAtoms, rng ) != XLAL_SUCCESS ) {
XLALPrintError ("%s: XLALAddNoiseToMultiFstatAtomVector() failed with xlalErrno = %d\n", __func__, xlalErrno );
XLAL_ERROR_NULL ( XLAL_EFUNC );
}
/* ----- if requested: return all inject signal parameters */
if ( injParamsOut )
{
injParamsOut->skypos = skypos;
injParamsOut->ampParams = Amp;
UINT4 i; for (i=0; i < 4; i ++) injParamsOut->ampVect[i] = A_Mu[i];
injParamsOut->multiAM = *multiAMBuffer->multiAM;
injParamsOut->transientWindow = injectWindow;
injParamsOut->SNR = sqrt(rho2);
injParamsOut->detM1o8 = detM1o8;
} /* if injParamsOut */
return multiAtoms;
} /* XLALSynthesizeTransientAtoms() */