/**
* @brief This function handles IRDA interrupt request.
* @param hirda: Pointer to a IRDA_HandleTypeDef structure that contains
* the configuration information for the specified IRDA module.
* @retval None
*/
void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda)
{
uint32_t tmp_flag = 0, tmp_it_source = 0;
tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_PE);
tmp_it_source = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_PE);
/* IRDA parity error interrupt occurred -----------------------------------*/
if((tmp_flag != RESET) && (tmp_it_source != RESET))
{
hirda->ErrorCode |= HAL_IRDA_ERROR_PE;
}
tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_FE);
tmp_it_source = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR);
/* IRDA frame error interrupt occurred ------------------------------------*/
if((tmp_flag != RESET) && (tmp_it_source != RESET))
{
hirda->ErrorCode |= HAL_IRDA_ERROR_FE;
}
tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_NE);
/* IRDA noise error interrupt occurred ------------------------------------*/
if((tmp_flag != RESET) && (tmp_it_source != RESET))
{
hirda->ErrorCode |= HAL_IRDA_ERROR_NE;
}
tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_ORE);
/* IRDA Over-Run interrupt occurred ---------------------------------------*/
if((tmp_flag != RESET) && (tmp_it_source != RESET))
{
hirda->ErrorCode |= HAL_IRDA_ERROR_ORE;
}
/* Call the Error call Back in case of Errors */
if(hirda->ErrorCode != HAL_IRDA_ERROR_NONE)
{
/* Disable PE and ERR interrupt */
__HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_ERR);
__HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_PE);
__HAL_IRDA_DISABLE_IT(hirda, IRDA_IT_TXE);
/* Clear all the error flag at once */
__HAL_IRDA_CLEAR_PEFLAG(hirda);
/* Set the IRDA state ready to be able to start again the process */
hirda->State = HAL_IRDA_STATE_READY;
HAL_IRDA_ErrorCallback(hirda);
}
tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_RXNE);
tmp_it_source = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_RXNE);
/* IRDA in mode Receiver --------------------------------------------------*/
if((tmp_flag != RESET) && (tmp_it_source != RESET))
{
IRDA_Receive_IT(hirda);
}
tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_TXE);
tmp_it_source = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TXE);
/* IRDA in mode Transmitter -----------------------------------------------*/
if((tmp_flag != RESET) && (tmp_it_source != RESET))
{
IRDA_Transmit_IT(hirda);
}
tmp_flag = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_TC);
tmp_it_source = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TC);
/* IRDA in mode Transmitter (transmission end) -----------------------------*/
if((tmp_flag != RESET) && (tmp_it_source != RESET))
{
IRDA_EndTransmit_IT(hirda);
}
}
/**
* @brief This function handles IRDA interrupt request.
* @param hirda: IRDA handle
* @retval None
*/
void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda)
{
/* IRDA parity error interrupt occurred -------------------------------------*/
if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_PE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_PE) != RESET))
{
__HAL_IRDA_CLEAR_PEFLAG(hirda);
hirda->ErrorCode |= HAL_IRDA_ERROR_PE;
/* Set the IRDA state ready to be able to start again the process */
hirda->State = HAL_IRDA_STATE_READY;
}
/* IRDA frame error interrupt occured --------------------------------------*/
if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_FE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR) != RESET))
{
__HAL_IRDA_CLEAR_FEFLAG(hirda);
hirda->ErrorCode |= HAL_IRDA_ERROR_FE;
/* Set the IRDA state ready to be able to start again the process */
hirda->State = HAL_IRDA_STATE_READY;
}
/* IRDA noise error interrupt occured --------------------------------------*/
if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_NE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR) != RESET))
{
__HAL_IRDA_CLEAR_NEFLAG(hirda);
hirda->ErrorCode |= HAL_IRDA_ERROR_NE;
/* Set the IRDA state ready to be able to start again the process */
hirda->State = HAL_IRDA_STATE_READY;
}
/* IRDA Over-Run interrupt occured -----------------------------------------*/
if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_ORE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR) != RESET))
{
__HAL_IRDA_CLEAR_OREFLAG(hirda);
hirda->ErrorCode |= HAL_IRDA_ERROR_ORE;
/* Set the IRDA state ready to be able to start again the process */
hirda->State = HAL_IRDA_STATE_READY;
}
/* Call IRDA Error Call back function if need be --------------------------*/
if(hirda->ErrorCode != HAL_IRDA_ERROR_NONE)
{
HAL_IRDA_ErrorCallback(hirda);
}
/* IRDA in mode Receiver ---------------------------------------------------*/
if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_RXNE) != RESET) && (__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_RXNE) != RESET))
{
IRDA_Receive_IT(hirda);
/* Clear RXNE interrupt flag */
__HAL_IRDA_SEND_REQ(hirda, IRDA_RXDATA_FLUSH_REQUEST);
}
/* IRDA in mode Transmitter ------------------------------------------------*/
if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_TXE) != RESET) &&(__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TXE) != RESET))
{
IRDA_Transmit_IT(hirda);
}
/* IRDA in mode Transmitter (transmission end) -----------------------------*/
if((__HAL_IRDA_GET_IT(hirda, IRDA_IT_TC) != RESET) &&(__HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TC) != RESET))
{
IRDA_EndTransmit_IT(hirda);
}
}
/**
* @brief This function handles IRDA interrupt request.
* @param hirda: pointer to a IRDA_HandleTypeDef structure that contains
* the configuration information for the specified IRDA module.
* @retval None
*/
void HAL_IRDA_IRQHandler(IRDA_HandleTypeDef *hirda)
{
uint32_t tmp1 = 0, tmp2 =0;
tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_PE);
tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_PE);
/* IRDA parity error interrupt occurred -------------------------------------*/
if((tmp1 != RESET) && (tmp2 != RESET))
{
__HAL_IRDA_CLEAR_PEFLAG(hirda);
hirda->ErrorCode |= HAL_IRDA_ERROR_PE;
}
tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_FE);
tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR);
/* IRDA frame error interrupt occurred --------------------------------------*/
if((tmp1 != RESET) && (tmp2 != RESET))
{
__HAL_IRDA_CLEAR_FEFLAG(hirda);
hirda->ErrorCode |= HAL_IRDA_ERROR_FE;
}
tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_NE);
tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR);
/* IRDA noise error interrupt occurred --------------------------------------*/
if((tmp1 != RESET) && (tmp2 != RESET))
{
__HAL_IRDA_CLEAR_NEFLAG(hirda);
hirda->ErrorCode |= HAL_IRDA_ERROR_NE;
}
tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_ORE);
tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_ERR);
/* IRDA Over-Run interrupt occurred -----------------------------------------*/
if((tmp1 != RESET) && (tmp2 != RESET))
{
__HAL_IRDA_CLEAR_OREFLAG(hirda);
hirda->ErrorCode |= HAL_IRDA_ERROR_ORE;
}
/* Call the Error call Back in case of Errors */
if(hirda->ErrorCode != HAL_IRDA_ERROR_NONE)
{
/* Set the IRDA state ready to be able to start again the process */
hirda->State = HAL_IRDA_STATE_READY;
HAL_IRDA_ErrorCallback(hirda);
}
tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_RXNE);
tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_RXNE);
/* IRDA in mode Receiver ---------------------------------------------------*/
if((tmp1 != RESET) && (tmp2 != RESET))
{
IRDA_Receive_IT(hirda);
}
tmp1 = __HAL_IRDA_GET_FLAG(hirda, IRDA_FLAG_TXE);
tmp2 = __HAL_IRDA_GET_IT_SOURCE(hirda, IRDA_IT_TXE);
/* IRDA in mode Transmitter ------------------------------------------------*/
if((tmp1 != RESET) &&(tmp2 != RESET))
{
IRDA_Transmit_IT(hirda);
}
}
