void psxCheckStartGate16(int i)
{
assert( i < 3 );
if(i == 0) // hSync counting...
{
// AlternateSource/scanline counters for Gates 1 and 3.
// We count them here so that they stay nicely synced with the EE's hsync.
const u32 altSourceCheck = IOPCNT_ALT_SOURCE | IOPCNT_ENABLE_GATE;
const u32 stoppedGateCheck = (IOPCNT_STOPPED | altSourceCheck );
// count if alt source is enabled and either:
// * the gate is enabled and not stopped.
// * the gate is disabled.
if( (psxCounters[1].mode & altSourceCheck) == IOPCNT_ALT_SOURCE ||
(psxCounters[1].mode & stoppedGateCheck ) == altSourceCheck )
{
psxCounters[1].count++;
_rcntTestTarget( 1 );
_rcntTestOverflow( 1 );
}
if( (psxCounters[3].mode & altSourceCheck) == IOPCNT_ALT_SOURCE ||
(psxCounters[3].mode & stoppedGateCheck ) == altSourceCheck )
{
psxCounters[3].count++;
_rcntTestTarget( 3 );
_rcntTestOverflow( 3 );
}
}
_psxCheckStartGate( i );
}
void psxRcntUpdate()
{
int i;
//u32 change = 0;
for (i=0; i<=5; i++)
{
s32 change = psxRegs.cycle - psxCounters[i].sCycleT;
// don't count disabled, gated, or hblank counters...
// We can't check the ALTSOURCE flag because the PSXCLOCK source *should*
// be counted here.
if( psxCounters[i].mode & (IOPCNT_STOPPED | IOPCNT_ENABLE_GATE) ) continue;
if( psxCounters[i].rate == PSXHBLANK ) continue;
if( change <= 0 ) continue;
psxCounters[i].count += change / psxCounters[i].rate;
if(psxCounters[i].rate != 1)
{
change -= (change / psxCounters[i].rate) * psxCounters[i].rate;
psxCounters[i].sCycleT = psxRegs.cycle - change;
}
else
psxCounters[i].sCycleT = psxRegs.cycle;
}
// Do target/overflow testing
// Optimization Note: This approach is very sound. Please do not try to unroll it
// as the size of the Test functions will cause code cache clutter and slowness.
for( i=0; i<6; i++ )
{
// don't do target/oveflow checks for hblankers. Those
// checks are done when the counters are updated.
if( psxCounters[i].rate == PSXHBLANK ) continue;
if( psxCounters[i].mode & IOPCNT_STOPPED ) continue;
_rcntTestTarget( i );
_rcntTestOverflow( i );
// perform second target test because if we overflowed above it's possible we
// already shot past our target if it was very near zero.
//if( psxCounters[i].count >= psxCounters[i].target ) _rcntTestTarget( i );
}
psxNextCounter = 0xffffff;
psxNextsCounter = psxRegs.cycle;
if(SPU2async)
{
const s32 difference = psxRegs.cycle - psxCounters[6].sCycleT;
s32 c = psxCounters[6].CycleT;
if(difference >= psxCounters[6].CycleT)
{
SPU2async(difference);
psxCounters[6].sCycleT = psxRegs.cycle;
psxCounters[6].CycleT = psxCounters[6].rate;
}
else c -= difference;
psxNextCounter = c;
}
if(USBasync)
{
const s32 difference = psxRegs.cycle - psxCounters[7].sCycleT;
s32 c = psxCounters[7].CycleT;
if(difference >= psxCounters[7].CycleT)
{
USBasync(difference);
psxCounters[7].sCycleT = psxRegs.cycle;
psxCounters[7].CycleT = psxCounters[7].rate;
}
else c -= difference;
if (c < psxNextCounter) psxNextCounter = c;
}
for (i=0; i<6; i++) _rcntSet( i );
}
void psxRcntUpdate()
{
int i;
//u32 change = 0;
g_iopNextEventCycle = psxRegs.cycle + 32;
psxNextCounter = 0x7fffffff;
psxNextsCounter = psxRegs.cycle;
for (i=0; i<=5; i++)
{
s32 change = psxRegs.cycle - psxCounters[i].sCycleT;
// don't count disabled or hblank counters...
// We can't check the ALTSOURCE flag because the PSXCLOCK source *should*
// be counted here.
if( psxCounters[i].mode & IOPCNT_STOPPED ) continue;
if ((psxCounters[i].mode & 0x40) && !(psxCounters[i].mode & 0x80)) { //Repeat IRQ mode Pulsed, resets a few cycles after the interrupt, this should do.
psxCounters[i].mode |= 0x400;
}
if( psxCounters[i].rate == PSXHBLANK ) continue;
if( change <= 0 ) continue;
psxCounters[i].count += change / psxCounters[i].rate;
if(psxCounters[i].rate != 1)
{
change -= (change / psxCounters[i].rate) * psxCounters[i].rate;
psxCounters[i].sCycleT = psxRegs.cycle - change;
}
else
psxCounters[i].sCycleT = psxRegs.cycle;
}
// Do target/overflow testing
// Optimization Note: This approach is very sound. Please do not try to unroll it
// as the size of the Test functions will cause code cache clutter and slowness.
for( i=0; i<6; i++ )
{
// don't do target/oveflow checks for hblankers. Those
// checks are done when the counters are updated.
if( psxCounters[i].rate == PSXHBLANK ) continue;
if( psxCounters[i].mode & IOPCNT_STOPPED ) continue;
_rcntTestTarget( i );
_rcntTestOverflow( i );
// perform second target test because if we overflowed above it's possible we
// already shot past our target if it was very near zero.
//if( psxCounters[i].count >= psxCounters[i].target ) _rcntTestTarget( i );
}
if(SPU2async)
{
const s32 difference = psxRegs.cycle - psxCounters[6].sCycleT;
s32 c = psxCounters[6].CycleT;
if(difference >= psxCounters[6].CycleT)
{
SPU2async(difference);
psxCounters[6].sCycleT = psxRegs.cycle;
psxCounters[6].CycleT = psxCounters[6].rate;
}
else c -= difference;
psxNextCounter = c;
}
if (DEV9async)
{
DEV9async(1);
}
if(USBasync)
{
const s32 difference = psxRegs.cycle - psxCounters[7].sCycleT;
s32 c = psxCounters[7].CycleT;
if(difference >= psxCounters[7].CycleT)
{
USBasync(difference);
psxCounters[7].sCycleT = psxRegs.cycle;
psxCounters[7].CycleT = psxCounters[7].rate;
}
else c -= difference;
if (c < psxNextCounter) psxNextCounter = c;
}
#ifdef ENABLE_NEW_IOPDMA
// New Iop DMA handler WIP
{
const s32 difference = psxRegs.cycle - psxCounters[8].sCycleT;
s32 c = psxCounters[8].CycleT;
if(difference >= psxCounters[8].CycleT)
{
psxCounters[8].sCycleT = psxRegs.cycle;
psxCounters[8].CycleT = psxCounters[8].rate;
IopDmaUpdate(difference);
}
else c -= difference;
if (c < psxNextCounter) psxNextCounter = c;
}
#endif
for (i=0; i<6; i++) _rcntSet( i );
}
