Exemplos de aci_queue_is_empty_from_isr em C++ (Cpp)

Exemplo n.º 1

Arquivo: aci_queue.c Projeto: joeferner/stm32lib

bool aci_queue_peek_from_isr(aci_queue_t *aci_q, hal_aci_data_t *p_data)
{
  ble_assert(NULL != aci_q);
  ble_assert(NULL != p_data);

  if (aci_queue_is_empty_from_isr(aci_q))
  {
    return false;
  }

  memcpy((uint8_t *)p_data, (uint8_t *)&(aci_q->aci_data[aci_q->head % ACI_QUEUE_SIZE]), sizeof(hal_aci_data_t));

  return true;
}

Exemplo n.º 2

Arquivo: hal_aci_tl.cpp Projeto: sebastianherp/HEITEC-BLE-Rotary-Encoder

/*
  Interrupt service routine called when the RDYN line goes low. Runs the SPI transfer.
*/
static void m_aci_isr(void)
{
  hal_aci_data_t data_to_send;
  hal_aci_data_t received_data;

  // see guide from http://redbearlab.com/blend-low-power-settings/
#if defined(__AVR_ATmega32U4__)
    PRR0 = 0x00;  // Power Reduction Register: open timer
    PRR1 = 0x00;
#endif  
  
  // Receive from queue
  if (!aci_queue_dequeue_from_isr(&aci_tx_q, &data_to_send))
  {
    /* queue was empty, nothing to send */
    data_to_send.status_byte = 0;
    data_to_send.buffer[0] = 0;
  }

  // Receive and/or transmit data
  m_aci_spi_transfer(&data_to_send, &received_data);

  if (!aci_queue_is_full_from_isr(&aci_rx_q) && !aci_queue_is_empty_from_isr(&aci_tx_q))
  {
    m_aci_reqn_enable();
  }

  // Check if we received data
  if (received_data.buffer[0] > 0)
  {
    if (!aci_queue_enqueue_from_isr(&aci_rx_q, &received_data))
    {
      /* Receive Buffer full.
         Should never happen.
         Spin in a while loop.
      */
      while(1);
    }

    // Disable ready line interrupt until we have room to store incoming messages
    if (aci_queue_is_full_from_isr(&aci_rx_q))
    {
      detachInterrupt(a_pins_local_ptr->interrupt_number);
    }
  }

  return;
}

Exemplo n.º 3

Arquivo: hal_aci_tl.cpp Projeto: femtoduino/arduino-BLEPeripheral

/*
  Interrupt service routine called when the RDYN line goes low. Runs the SPI transfer.
*/
static void m_aci_isr(void)
{
  hal_aci_data_t data_to_send;
  hal_aci_data_t received_data;

  // Receive from queue
  if (!aci_queue_dequeue_from_isr(&aci_tx_q, &data_to_send))
  {
    /* queue was empty, nothing to send */
    data_to_send.status_byte = 0;
    data_to_send.buffer[0] = 0;
  }

  // Receive and/or transmit data
  m_aci_spi_transfer(&data_to_send, &received_data);

  if (!aci_queue_is_full_from_isr(&aci_rx_q) && !aci_queue_is_empty_from_isr(&aci_tx_q))
  {
    m_aci_reqn_enable();
  }

  // Check if we received data
  if (received_data.buffer[0] > 0)
  {
    if (!aci_queue_enqueue_from_isr(&aci_rx_q, &received_data))
    {
      /* Receive Buffer full.
         Should never happen.
         Spin in a while loop.
      */
      while(1);
    }

    // Disable ready line interrupt until we have room to store incoming messages
    if (aci_queue_is_full_from_isr(&aci_rx_q))
    {
      detachInterrupt(a_pins_local_ptr->interrupt_number);
    }
  }

  return;
}