VESPERSEXAFSScanConfigurationView::VESPERSEXAFSScanConfigurationView(VESPERSEXAFSScanConfiguration *config, QWidget *parent)
: VESPERSScanConfigurationView(parent)
{
config_ = config;
AMTopFrame *frame = new AMTopFrame("VESPERS EXAFS Configuration");
// Regions setup
regionsView_ = new AMRegionsView(config_->regions());
regionsView_->setMinimumWidth(300);
regionsLineView_ = new AMEXAFSLineView(config_->exafsRegions());
// The fluorescence detector setup
QGroupBox *fluorescenceDetectorGroupBox = addFluorescenceDetectorSelectionView();
connect(fluorescenceButtonGroup_, SIGNAL(buttonClicked(int)), this, SLOT(onFluorescenceChoiceChanged(int)));
connect(config_->dbObject(), SIGNAL(fluorescenceDetectorChanged(int)), this, SLOT(updateFluorescenceDetector(int)));
fluorescenceButtonGroup_->button((int)config_->fluorescenceDetector())->setChecked(true);
// Ion chamber selection
QGroupBox *ItGroupBox = addItSelectionView();
connect(ItGroup_, SIGNAL(buttonClicked(int)), this, SLOT(onItClicked(int)));
connect(config_->dbObject(), SIGNAL(transmissionChoiceChanged(int)), this, SLOT(updateItButtons(int)));
QGroupBox *I0GroupBox = addI0SelectionView();
connect(I0Group_, SIGNAL(buttonClicked(int)), this, SLOT(onI0Clicked(int)));
connect(config_->dbObject(), SIGNAL(incomingChoiceChanged(int)), this, SLOT(updateI0Buttons(int)));
I0Group_->button((int)config_->incomingChoice())->click();
ItGroup_->button((int)config_->transmissionChoice())->click();
QHBoxLayout *ionChambersLayout = new QHBoxLayout;
ionChambersLayout->addWidget(I0GroupBox);
ionChambersLayout->addWidget(ItGroupBox);
// Scan name selection
scanName_ = addScanNameView(config_->name());
connect(scanName_, SIGNAL(editingFinished()), this, SLOT(onScanNameEdited()));
connect(config_, SIGNAL(nameChanged(QString)), scanName_, SLOT(setText(QString)));
onScanNameEdited();
QFormLayout *scanNameLayout = new QFormLayout;
scanNameLayout->addRow("Scan Name:", scanName_);
// Energy (Eo) selection
energy_ = new QDoubleSpinBox;
energy_->setSuffix(" eV");
energy_->setMinimum(0);
energy_->setMaximum(30000);
connect(energy_, SIGNAL(editingFinished()), this, SLOT(setEnergy()));
elementChoice_ = new QToolButton;
connect(elementChoice_, SIGNAL(clicked()), this, SLOT(onElementChoiceClicked()));
lineChoice_ = new QComboBox;
connect(lineChoice_, SIGNAL(currentIndexChanged(int)), this, SLOT(onLinesComboBoxIndexChanged(int)));
if (config_->edge().isEmpty()){
elementChoice_->setText("Cu");
fillLinesComboBox(AMPeriodicTable::table()->elementBySymbol("Cu"));
lineChoice_->setCurrentIndex(0);
}
// Resets the view for the view to what it should be. Using the saved for the energy in case it is different from the original line energy.
else
onEdgeChanged();
connect(config_, SIGNAL(edgeChanged(QString)), this, SLOT(onEdgeChanged()));
QCheckBox *useFixedTime = new QCheckBox("Use fixed time (EXAFS)");
useFixedTime->setEnabled(config_->useFixedTime());
connect(config_->exafsRegions(), SIGNAL(regionsHaveKSpaceChanged(bool)), useFixedTime, SLOT(setEnabled(bool)));
connect(useFixedTime, SIGNAL(toggled(bool)), config_, SLOT(setUseFixedTime(bool)));
QSpinBox *numberOfScans = new QSpinBox;
numberOfScans->setMinimum(1);
numberOfScans->setValue(config_->numberOfScans());
numberOfScans->setAlignment(Qt::AlignCenter);
connect(numberOfScans, SIGNAL(valueChanged(int)), config_, SLOT(setNumberOfScans(int)));
connect(config_, SIGNAL(numberOfScansChanged(int)), this, SLOT(onEstimatedTimeChanged()));
QFormLayout *numberOfScansLayout = new QFormLayout;
numberOfScansLayout->addRow("Number of Scans:", numberOfScans);
QFormLayout *energySetpointLayout = new QFormLayout;
energySetpointLayout->addRow("Energy:", energy_);
QHBoxLayout *energyLayout = new QHBoxLayout;
energyLayout->addLayout(energySetpointLayout);
energyLayout->addWidget(elementChoice_);
energyLayout->addWidget(lineChoice_);
// Setting the scan position.
QGroupBox *goToPositionGroupBox = addGoToPositionView(config_->goToPosition(), config_->x(), config_->y());
connect(config_, SIGNAL(gotoPositionChanged(bool)), goToPositionCheckBox_, SLOT(setChecked(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), config_, SLOT(setGoToPosition(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), setCurrentPositionButton_, SLOT(setEnabled(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), savedXPosition_, SLOT(setEnabled(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), savedYPosition_, SLOT(setEnabled(bool)));
connect(goToPositionCheckBox_, SIGNAL(toggled(bool)), positionsSaved_, SLOT(setEnabled(bool)));
connect(setCurrentPositionButton_, SIGNAL(clicked()), this, SLOT(setScanPosition()));
setSampleStage(VESPERSBeamline::vespers()->experimentConfiguration()->sampleStageChoice());
// The estimated scan time.
estimatedTime_ = new QLabel;
estimatedSetTime_ = new QLabel;
connect(config_, SIGNAL(totalTimeChanged(double)), this, SLOT(onEstimatedTimeChanged()));
onEstimatedTimeChanged();
// The roi text edit.
roiText_ = new QTextEdit;
roiText_->setReadOnly(true);
QPushButton *configureXRFDetectorButton = new QPushButton(QIcon(":/hammer-wrench.png"), "Configure XRF Detector");
connect(configureXRFDetectorButton, SIGNAL(clicked()), this, SLOT(onConfigureXRFDetectorClicked()));
QFormLayout *roiTextLayout = new QFormLayout;
roiTextLayout->addRow(roiText_);
roiTextLayout->addRow(configureXRFDetectorButton);
roiTextBox_ = new QGroupBox("Regions Of Interest");
roiTextBox_->setLayout(roiTextLayout);
roiTextBox_->setVisible(config_->fluorescenceDetector() == VESPERS::NoXRF ? false : true);
// Label showing where the data will be saved.
QLabel *exportPath = addExportPathLabel();
// Label with a help message for EXAFS.
QLabel *helpMessage = new QLabel("Note when using EXAFS: when using variable integration time, the time column is the maximum time.");
// Default XANES and EXAFS buttons.
QPushButton *defaultXANESButton = new QPushButton("Default XANES");
connect(defaultXANESButton, SIGNAL(clicked()), this, SLOT(onDefaultXANESScanClicked()));
QPushButton *defaultEXAFSButton = new QPushButton("Default EXAFS");
connect(defaultEXAFSButton, SIGNAL(clicked()), this, SLOT(onDefaultEXAFSScanClicked()));
// Setting up the steps to show the time offset for scan time estimation.
connect(this, SIGNAL(customContextMenuRequested(QPoint)), this, SLOT(onCustomContextMenuRequested(QPoint)));
setContextMenuPolicy(Qt::CustomContextMenu);
QGroupBox *timeOffsetBox = addTimeOffsetLabel(config_->timeOffset());
connect(timeOffset_, SIGNAL(valueChanged(double)), this, SLOT(setTimeOffset(double)));
QVBoxLayout *defaultLayout = new QVBoxLayout;
defaultLayout->addSpacing(35);
defaultLayout->addWidget(defaultXANESButton);
defaultLayout->addWidget(defaultEXAFSButton);
defaultLayout->addStretch();
// Auto-export option.
QGroupBox *autoExportGroupBox = addExporterOptionsView(QStringList(), config_->exportSpectraSources());
connect(autoExportSpectra_, SIGNAL(toggled(bool)), config_, SLOT(setExportSpectraSources(bool)));
// Setting up the layout.
QGridLayout *contentsLayout = new QGridLayout;
contentsLayout->addWidget(regionsView_, 1, 1, 2, 2);
contentsLayout->addWidget(fluorescenceDetectorGroupBox, 1, 3);
contentsLayout->addLayout(scanNameLayout, 4, 1);
contentsLayout->addLayout(energyLayout, 0, 1, 1, 3);
contentsLayout->addWidget(goToPositionGroupBox, 4, 3, 4, 1);
contentsLayout->addLayout(ionChambersLayout, 2, 3, 2, 1);
contentsLayout->addWidget(roiTextBox_, 1, 4, 2, 2);
contentsLayout->addWidget(useFixedTime, 3, 1);
contentsLayout->addWidget(estimatedTime_, 6, 1, 1, 2);
contentsLayout->addWidget(estimatedSetTime_, 7, 1, 1, 2);
contentsLayout->addLayout(numberOfScansLayout, 5, 1);
contentsLayout->addWidget(timeOffsetBox, 8, 1, 1, 2);
contentsLayout->addWidget(autoExportGroupBox, 4, 5, 2, 3);
QHBoxLayout *squeezeContents = new QHBoxLayout;
squeezeContents->addStretch();
squeezeContents->addLayout(defaultLayout);
squeezeContents->addLayout(contentsLayout);
squeezeContents->addStretch();
QVBoxLayout *configViewLayout = new QVBoxLayout;
configViewLayout->addWidget(frame);
configViewLayout->addStretch();
configViewLayout->addWidget(regionsLineView_, 0, Qt::AlignCenter);
configViewLayout->addSpacing(30);
configViewLayout->addLayout(squeezeContents);
configViewLayout->addSpacing(30);
configViewLayout->addWidget(exportPath, 0, Qt::AlignCenter);
configViewLayout->addSpacing(30);
configViewLayout->addWidget(helpMessage, 0, Qt::AlignCenter);
configViewLayout->addStretch();
setLayout(configViewLayout);
}
VESPERS2DScanConfigurationView::VESPERS2DScanConfigurationView(VESPERS2DScanConfiguration *config, QWidget *parent)
: VESPERSScanConfigurationView(parent)
{
config_ = config;
AMTopFrame *frame = new AMTopFrame("VESPERS 2D Map Configuration");
// Setup the group box for setting the start and end points.
QGroupBox *positionsBox = new QGroupBox("Positions");
hStart_ = buildPositionDoubleSpinBox("H: ", " mm", config_->xStart(), 3);
connect(hStart_, SIGNAL(editingFinished()), this, SLOT(onXStartChanged()));
connect(config_, SIGNAL(xStartChanged(double)), hStart_, SLOT(setValue(double)));
vStart_ = buildPositionDoubleSpinBox("V: ", " mm", config_->yStart(), 3);
connect(vStart_, SIGNAL(editingFinished()), this, SLOT(onYStartChanged()));
connect(config_, SIGNAL(yStartChanged(double)), vStart_, SLOT(setValue(double)));
QPushButton *startUseCurrentButton = new QPushButton("Use Current");
connect(startUseCurrentButton, SIGNAL(clicked()), this, SLOT(onSetStartPosition()));
QHBoxLayout *startPointLayout = new QHBoxLayout;
startPointLayout->addWidget(new QLabel("Start:"));
startPointLayout->addWidget(hStart_);
startPointLayout->addWidget(vStart_);
startPointLayout->addWidget(startUseCurrentButton);
hEnd_ = buildPositionDoubleSpinBox("H: ", " mm", config_->xEnd(), 3);
connect(hEnd_, SIGNAL(editingFinished()), this, SLOT(onXEndChanged()));
connect(config_, SIGNAL(xEndChanged(double)), hEnd_, SLOT(setValue(double)));
vEnd_ = buildPositionDoubleSpinBox("V: ", " mm", config_->yEnd(), 3);
connect(vEnd_, SIGNAL(editingFinished()), this, SLOT(onYEndChanged()));
connect(config_, SIGNAL(yEndChanged(double)), vEnd_, SLOT(setValue(double)));
QPushButton *endUseCurrentButton = new QPushButton("Use Current");
connect(endUseCurrentButton, SIGNAL(clicked()), this, SLOT(onSetEndPosition()));
QHBoxLayout *endPointLayout = new QHBoxLayout;
endPointLayout->addWidget(new QLabel("End:"));
endPointLayout->addWidget(hEnd_);
endPointLayout->addWidget(vEnd_);
endPointLayout->addWidget(endUseCurrentButton);
hStep_ = buildPositionDoubleSpinBox("H: ", QString(" %1").arg(QString::fromUtf8("µm")), config_->xStep()*1000, 1); // xStep needs to be in mm.
connect(hStep_, SIGNAL(editingFinished()), this, SLOT(onXStepChanged()));
connect(config_, SIGNAL(xStepChanged(double)), this, SLOT(updateXStep(double)));
vStep_ = buildPositionDoubleSpinBox("V: ", QString(" %1").arg(QString::fromUtf8("µm")), config_->yStep()*1000, 1); // yStep needs to be in mm.
connect(vStep_, SIGNAL(editingFinished()), this, SLOT(onYStepChanged()));
connect(config_, SIGNAL(yStepChanged(double)), this, SLOT(updateYStep(double)));
QHBoxLayout *stepSizeLayout = new QHBoxLayout;
stepSizeLayout->addWidget(new QLabel("Step Size:"));
stepSizeLayout->addWidget(hStep_);
stepSizeLayout->addWidget(vStep_);
stepSizeLayout->addStretch();
mapInfo_ = new QLabel;
updateMapInfo();
QVBoxLayout *positionsLayout = new QVBoxLayout;
positionsLayout->addLayout(startPointLayout);
positionsLayout->addLayout(endPointLayout);
positionsLayout->addLayout(stepSizeLayout);
positionsLayout->addWidget(mapInfo_);
positionsBox->setLayout(positionsLayout);
// Dwell time.
dwellTime_ = addDwellTimeWidget(config_->timeStep());
connect(dwellTime_, SIGNAL(editingFinished()), this, SLOT(onDwellTimeChanged()));
connect(config_, SIGNAL(timeStepChanged(double)), dwellTime_, SLOT(setValue(double)));
QHBoxLayout *timeLayout = new QHBoxLayout;
timeLayout->addWidget(new QLabel("Dwell Time:"));
timeLayout->addWidget(dwellTime_);
// The estimated scan time.
estimatedTime_ = new QLabel;
connect(config_, SIGNAL(totalTimeChanged(double)), this, SLOT(onEstimatedTimeChanged()));
onEstimatedTimeChanged();
QVBoxLayout *timeBoxLayout = new QVBoxLayout;
timeBoxLayout->addLayout(timeLayout);
timeBoxLayout->addWidget(estimatedTime_);
QGroupBox *timeGroupBox = new QGroupBox("Time");
timeGroupBox->setLayout(timeBoxLayout);
// Using the CCD.
QGroupBox *ccdBox = addCCDDetectorSelectionView();
connect(ccdButtonGroup_, SIGNAL(buttonClicked(int)), this, SLOT(onCCDDetectorChanged(int)));
connect(config_->dbObject(), SIGNAL(ccdDetectorChanged(int)), this, SLOT(updateCCDDetectorButtons(int)));
ccdButtonGroup_->button(int(config_->ccdDetector()))->setChecked(true);
ccdButtonGroup_->button((int)VESPERS::Roper)->hide();
ccdButtonGroup_->button((int)VESPERS::Mar)->hide();
configureCCDButton_ = new QPushButton(QIcon(":/hammer-wrench.png"), "Configure CCD");
configureCCDButton_->setEnabled(config_->ccdDetector());
connect(configureCCDButton_, SIGNAL(clicked()), this, SLOT(onConfigureCCDDetectorClicked()));
// The fluorescence detector setup
QGroupBox *fluorescenceDetectorGroupBox = addFluorescenceDetectorSelectionView();
fluorescenceButtonGroup_->button(int(VESPERS::NoXRF))->setDisabled(true);
connect(fluorescenceButtonGroup_, SIGNAL(buttonClicked(int)), this, SLOT(onFluorescenceChoiceChanged(int)));
connect(config_->dbObject(), SIGNAL(fluorescenceDetectorChanged(int)), this, SLOT(updateFluorescenceDetector(int)));
fluorescenceButtonGroup_->button((int)config_->fluorescenceDetector())->setChecked(true);
// Ion chamber selection
QGroupBox *I0GroupBox = addI0SelectionView();
connect(I0Group_, SIGNAL(buttonClicked(int)), this, SLOT(onI0Clicked(int)));
connect(config_->dbObject(), SIGNAL(incomingChoiceChanged(int)), this, SLOT(updateI0Buttons(int)));
I0Group_->button((int)config_->incomingChoice())->click();
// Motor selection.
QGroupBox *motorSetChoiceBox = addMotorSelectionView(QStringList() << "H and V" << "X and Z", QList<int>() << (VESPERS::H | VESPERS::V) << (VESPERS::X | VESPERS::Z));
connect(motorButtonGroup_, SIGNAL(buttonClicked(int)), this, SLOT(onMotorChanged(int)));
motorButtonGroup_->button(int(config_->motor()))->click();
// CCD label.
ccdText_ = new QLabel;
ccdHelpText_ = new QLabel;
ccdTextBox_ = new QGroupBox("CCD Detector Info");
QVBoxLayout *ccdTextLayout = new QVBoxLayout;
ccdTextLayout->addWidget(ccdText_);
ccdTextLayout->addWidget(ccdHelpText_);
ccdTextBox_->setLayout(ccdTextLayout);
ccdTextBox_->setVisible(config_->ccdDetector() != VESPERS::NoCCD);
// Scan name selection
scanName_ = addScanNameView(config_->name());
connect(scanName_, SIGNAL(editingFinished()), this, SLOT(onScanNameEdited()));
connect(config_, SIGNAL(nameChanged(QString)), scanName_, SLOT(setText(QString)));
onScanNameEdited();
QFormLayout *scanNameLayout = new QFormLayout;
scanNameLayout->addRow("Scan Name:", scanName_);
// The roi text edit and configuration.
roiText_ = new QTextEdit;
roiText_->setReadOnly(true);
QPushButton *configureXRFDetectorButton = new QPushButton(QIcon(":/hammer-wrench.png"), "Configure XRF Detector");
connect(configureXRFDetectorButton, SIGNAL(clicked()), this, SLOT(onConfigureXRFDetectorClicked()));
QFormLayout *roiTextLayout = new QFormLayout;
roiTextLayout->addRow(roiText_);
roiTextLayout->addRow(configureXRFDetectorButton);
QGroupBox *roiTextBox = new QGroupBox("Regions Of Interest");
roiTextBox->setLayout(roiTextLayout);
// Label showing where the data will be saved.
QLabel *exportPath = addExportPathLabel();
QGroupBox *timeOffsetBox = addTimeOffsetLabel(config_->timeOffset());
connect(timeOffset_, SIGNAL(valueChanged(double)), this, SLOT(setTimeOffset(double)));
// Auto-export option.
QGroupBox *autoExportGroupBox = addExporterOptionsView(QStringList() << "Ascii" << "SMAK", config_->exportSpectraSources());
connect(autoExportButtonGroup_, SIGNAL(buttonClicked(int)), this, SLOT(updateAutoExporter(int)));
connect(autoExportSpectra_, SIGNAL(toggled(bool)), config_, SLOT(setExportSpectraSources(bool)));
autoExportButtonGroup_->button(config_->exportAsAscii() ? 0 : 1)->click();
// Setting up the layout.
QGridLayout *contentsLayout = new QGridLayout;
contentsLayout->addWidget(positionsBox, 0, 0, 2, 3);
contentsLayout->addWidget(timeGroupBox, 2, 0, 1, 1);
contentsLayout->addWidget(ccdBox, 3, 0, 1, 1);
contentsLayout->addLayout(scanNameLayout, 4, 0, 1, 1);
contentsLayout->addWidget(timeOffsetBox, 5, 0, 1, 1);
contentsLayout->addWidget(configureCCDButton_, 6, 0, 1, 1);
contentsLayout->addWidget(motorSetChoiceBox, 0, 3, 1, 1);
contentsLayout->addWidget(fluorescenceDetectorGroupBox, 1, 3, 2, 1);
contentsLayout->addWidget(I0GroupBox, 3, 3, 2, 1);
contentsLayout->addWidget(ccdTextBox_, 7, 0, 1, 6);
contentsLayout->addWidget(roiTextBox, 0, 5, 3, 3);
contentsLayout->addWidget(autoExportGroupBox, 3, 5, 2, 3);
QHBoxLayout *squeezeContents = new QHBoxLayout;
squeezeContents->addStretch();
squeezeContents->addLayout(contentsLayout);
squeezeContents->addStretch();
QVBoxLayout *configViewLayout = new QVBoxLayout;
configViewLayout->addWidget(frame);
configViewLayout->addStretch();
configViewLayout->addLayout(squeezeContents);
configViewLayout->addStretch();
configViewLayout->addWidget(exportPath, 0, Qt::AlignCenter);
configViewLayout->addSpacing(30);
setLayout(configViewLayout);
}
