static void sensors_callback(sensors_evt_t evt, sensors_data_t *data)
{
switch (evt) {
case SI7020_TEMP_MEAS_EVT:
NRF_LOG_PRINTF("[APPL] Temperature measurement, %.2f.\r\n", data->temperature);
// bluetooth_update_temperature(data->temperature);
if (m_adv_state == W_ADV_STATE_IDLE) {
advertising_init();
advertising_start();
}
break;
case SI7020_HUM_MEAS_EVT:
NRF_LOG_PRINTF("[APP] T=%d.%02d°C, RH=%d.%02d%%\r\n", (uint32_t)data->temperature,
(uint32_t)(100.0 * data->temperature) - 100 * (uint32_t)data->temperature,
(uint32_t)data->humidity,
(uint32_t)(100.0 * data->humidity) - 100 * (uint32_t)data->humidity);
// bluetooth_update_temperature(data->temperature);
// bluetooth_update_humidity(data->humidity);
if (m_adv_state == W_ADV_STATE_IDLE) {
advertising_init();
advertising_start();
}
break;
}
}
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
nrf_gpio_pin_set(IMM_NRF5_CONNECT_LED);
g_LmxServ.conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
break;
case BLE_GAP_EVT_DISCONNECTED:
nrf_gpio_pin_clear(IMM_NRF5_CONNECT_LED);
g_LmxServ.conn_handle = BLE_CONN_HANDLE_INVALID;
advertising_start();
// Go to system-off mode, should not return from this function, wakeup will trigger
// a reset.
//system_off_mode_enter();
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
//err_code = sd_ble_gap_sec_params_reply(g_LmxServ.conn_handle,
// BLE_GAP_SEC_STATUS_SUCCESS,
// &g_GAPSecParams);
//APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISING)
{
nrf_gpio_pin_clear(IMM_NRF5_CONNECT_LED);
// Go to system-off mode.
// (this function will not return; wakeup will cause a reset).
//err_code = sd_power_system_off();
advertising_start();
APP_ERROR_CHECK(err_code);
}
break;
case BLE_GATTC_EVT_TIMEOUT:
case BLE_GATTS_EVT_TIMEOUT:
// Disconnect on GATT Server and Client timeout events.
err_code = sd_ble_gap_disconnect(g_LmxServ.conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
advertising_start();
break;
default:
// No implementation needed.
break;
}
}
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code = NRF_SUCCESS;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
err_code = bsp_indication_set(BSP_INDICATE_CONNECTED);
APP_ERROR_CHECK(err_code);
m_advertising_mode = BLE_NO_ADV;
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
break;
case BLE_GAP_EVT_DISCONNECTED:
err_code = bsp_indication_set(BSP_INDICATE_IDLE);
APP_ERROR_CHECK(err_code);
m_conn_handle = BLE_CONN_HANDLE_INVALID;
advertising_start();
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISING)
{
if (m_advertising_mode == BLE_SLEEP)
{
sleep_mode_enter();
}
else
{
advertising_start();
}
}
break;
case BLE_GATTC_EVT_TIMEOUT:
case BLE_GATTS_EVT_TIMEOUT:
// Disconnect on GATT Server and Client timeout events.
err_code = sd_ble_gap_disconnect(m_conn_handle,
BLE_HCI_REMOTE_USER_TERMINATED_CONNECTION);
APP_ERROR_CHECK(err_code);
break;
default:
// No implementation needed.
break;
}
}
int main(void) {
// Initialization
led_init(SQUALL_LED_PIN);
led_init(BLEES_LED_PIN);
led_on(SQUALL_LED_PIN);
led_on(BLEES_LED_PIN);
timers_init(); // must start before conn_params
// Setup BLE and services
ble_stack_init();
gap_params_init();
advertising_init();
services_init();
conn_params_init();
// Advertise data
adv_physweb();
advertising_start();
// Initialization complete
led_off(SQUALL_LED_PIN);
led_off(BLEES_LED_PIN);
timers_start();
while (1) {
power_manage();
}
}
/**@brief Function for handling the Application's BLE Stack events.
*
* @param[in] p_ble_evt Bluetooth stack event.
*/
static void on_ble_evt(ble_evt_t * p_ble_evt)
{
uint32_t err_code = NRF_SUCCESS;
switch (p_ble_evt->header.evt_id)
{
case BLE_GAP_EVT_CONNECTED:
nrf_gpio_pin_set(CONNECTED_LED_PIN_NO);
nrf_gpio_pin_clear(ADVERTISING_LED_PIN_NO);
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
break;
case BLE_GAP_EVT_DISCONNECTED:
nrf_gpio_pin_clear(CONNECTED_LED_PIN_NO);
m_conn_handle = BLE_CONN_HANDLE_INVALID;
advertising_start();
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT)
{
nrf_gpio_pin_clear(ADVERTISING_LED_PIN_NO);
// Go to system-off mode (this function will not return; wakeup will cause a reset).
err_code = sd_power_system_off();
APP_ERROR_CHECK(err_code);
}
break;
default:
// No implementation needed.
break;
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
bool erase_bonds;
// Initialize.
app_trace_init();
timers_init();
buttons_leds_init(&erase_bonds);
ble_stack_init();
adc_configure();
device_manager_init(erase_bonds);
gap_params_init();
advertising_init(BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE);
services_init();
conn_params_init();
// Start execution.
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
}
static void on_ble_evt(ble_evt_t * p_ble_evt){
uint32_t err_code;
switch (p_ble_evt->header.evt_id){
case BLE_GAP_EVT_CONNECTED:
m_conn_handle = p_ble_evt->evt.gap_evt.conn_handle;
enable_hr_rdy_interrupt();
break;
case BLE_GAP_EVT_DISCONNECTED:
m_conn_handle = BLE_CONN_HANDLE_INVALID;
disable_hr_rdy_interrupt();
advertising_start();
break;
case BLE_GAP_EVT_SEC_PARAMS_REQUEST:
err_code = sd_ble_gap_sec_params_reply(m_conn_handle,
BLE_GAP_SEC_STATUS_SUCCESS,
&m_sec_params);
APP_ERROR_CHECK(err_code);
break;
case BLE_GAP_EVT_TIMEOUT:
if (p_ble_evt->evt.gap_evt.params.timeout.src == BLE_GAP_TIMEOUT_SRC_ADVERTISEMENT){
err_code = sd_power_system_off();
APP_ERROR_CHECK(err_code);
}
break;
default:
break;
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
// Initialize
timers_init();
gpiote_init();
ble_stack_init();
bsp_module_init();
scheduler_init();
gap_params_init();
advertising_init();
services_init();
conn_params_init();
sec_params_init();
// Start execution
timers_start();
advertising_start();
// Enter main loop
for (;;)
{
app_sched_execute();
power_manage();
}
}
uint32_t dfu_transport_update_start()
{
uint32_t err_code;
m_pkt_type = PKT_TYPE_INVALID;
leds_init();
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
if (err_code != NRF_SUCCESS)
{
return err_code;
}
dfu_register_callback(dfu_cb_handler);
err_code = hci_mem_pool_open();
if (err_code != NRF_SUCCESS)
{
return err_code;
}
gap_params_init();
services_init();
advertising_init();
conn_params_init();
sec_params_init();
advertising_start();
return NRF_SUCCESS;
}
/**@brief Application main function.
*/
int main(void)
{
// Initialize
leds_init();
timers_init();
gpiote_init();
buttons_init();
bond_manager_init();
ble_stack_init();
ble_error_log_init();
gap_params_init();
advertising_init();
alert_notification_init();
conn_params_init();
sec_params_init();
radio_notification_init();
// Start execution
advertising_start();
// Enter main loop
for (;;)
{
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
// Initialize
app_trace_init();
leds_init();
timers_init();
buttons_init();
ipv6_transport_init();
ip_stack_init();
uint32_t err_code = coap_init(17);
APP_ERROR_CHECK(err_code);
coap_endpoints_init();
iot_timer_init();
APPL_LOG("\r\n");
APPL_LOG("[APPL]: Init complete.\r\n");
// Start execution
advertising_start();
// Enter main loop
for (;;)
{
power_manage();
}
}
int main(void)
{
gpio_init();
uart_init();
timers_init();
__LOG("Timers initialized.");
ble_stack_init();
//device_manager_init(erase_bonds);
gap_params_init();
services_init();
advertising_init();
__LOG("Radio initialized.");
conn_params_init();
storage_init();
contacts_init();
__LOG("Application modules initialized");
// Start execution.
timers_start();
advertising_start();
__LOG("ADV Started");
scan_start();
__LOG("Scan Started");
// Enter main loop.
for (;;)
{
power_manage();
}
}
uint32_t ble_dfu_transport_init(void)
{
uint32_t err_code;
m_flags &= ~DFU_BLE_FLAG_NONE;
err_code = ble_stack_init(true);
VERIFY_SUCCESS(err_code);
err_code = softdevice_ble_evt_handler_set(ble_evt_dispatch);
VERIFY_SUCCESS(err_code);
err_code = gap_params_init();
VERIFY_SUCCESS(err_code);
// Initialize the Device Firmware Update Service.
err_code = ble_dfu_init(&m_dfu);
VERIFY_SUCCESS(err_code);
err_code = conn_params_init();
VERIFY_SUCCESS(err_code);
err_code = advertising_start();
VERIFY_SUCCESS(err_code);
return NRF_SUCCESS;
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
// Initialize.
ble_stack_init();
timers_init();
err_code = bsp_init(BSP_INIT_LED, APP_TIMER_TICKS(100, APP_TIMER_PRESCALER), NULL);
APP_ERROR_CHECK(err_code);
device_manager_init();
gap_params_init();
advertising_init();
services_init();
sensor_simulator_init();
conn_params_init();
beacon_scanner_init.evt_handler = beacon_evt_handler;
beacon_scanner_init.error_handler = beacon_scanner_error_handler;
app_beacon_scanner_init(&beacon_scanner_init);
app_beacon_scanner_start();
// Start execution.
application_timers_start();
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
}
/**@brief Application main function.
*/
int main(void)
{
// Initialize
leds_init();
timers_init();
gpiote_init();
buttons_init();
bond_manager_init();
ble_stack_init();
scheduler_init();
gap_params_init();
advertising_init(BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE);
services_init();
sensor_sim_init();
conn_params_init();
sec_params_init();
radio_notification_init();
// Start execution
timers_start();
advertising_start();
// Enter main loop
for (;;)
{
app_sched_execute();
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
// Initialize.
app_trace_init();
ble_stack_init();
device_manager_init();
timers_init();
APP_GPIOTE_INIT(APP_GPIOTE_MAX_USERS);
err_code = bsp_init(BSP_INIT_LED | BSP_INIT_BUTTONS,
APP_TIMER_TICKS(100, APP_TIMER_PRESCALER),
NULL);
APP_ERROR_CHECK(err_code);
gap_params_init();
advertising_init();
services_init();
sensor_simulator_init();
conn_params_init();
// Start execution.
application_timers_start();
advertising_start();
// Enter main loop.
for (;; )
{
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
// Initialize.
app_trace_init();
leds_init();
buttons_init();
timers_init();
ble_stack_init();
device_manager_init();
gap_params_init();
advertising_init();
services_init();
sensor_sim_init();
conn_params_init();
// Start execution.
application_timers_start();
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
}
int main(void)
{
// uint32_t err_code;
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_MAX_TIMERS, APP_TIMER_OP_QUEUE_SIZE, false);
APP_GPIOTE_INIT(APP_GPIOTE_MAX_USERS);
ble_stack_init();
sys_Initialize();
sys_Timer_Handler_Init();
gap_params_init();
services_init();
advertising_init();
conn_params_init();
sec_params_init();
sys_printf("Gift Air Project Start\n\r");
advertising_start();
sys_Timer_Handler_Start();
NRF_WDT->RR[0] = WDT_RR_RR_Reload; //Reload watchdog register 0
// Enter main loop
for (;;)
{
power_manage(); //2sec, 200ms
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
// Initialize.
app_trace_init();
timers_init();
gpiote_init();
err_code = bsp_init(BSP_INIT_LED | BSP_INIT_BUTTONS,
APP_TIMER_TICKS(100, APP_TIMER_PRESCALER),
button_event_handler);
APP_ERROR_CHECK(err_code);
ble_stack_init();
adc_configure();
device_manager_init();
gap_params_init();
advertising_init(BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE);
services_init();
conn_params_init();
// Start execution.
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
// Initialize.
leds_init();
buttons_init();
timers_init();
ble_stack_init();
device_manager_init();
gap_params_init();
advertising_init();
services_init();
sensor_sim_init();
conn_params_init();
//simple_uart_config(31,9,31,31,false);
//simple_uart_putstring("Starting...");
// Start execution.
//Turn off HRM update
//application_timers_start();
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
}
*/
int main(void)
{
// Initialize.
leds_init();
timers_init();
gpiote_init();
buttons_init();
ble_stack_init();
bond_manager_init();
gap_params_init();
advertising_init(BLE_GAP_ADV_FLAGS_LE_ONLY_LIMITED_DISC_MODE);
services_init();
sensor_sim_init();
conn_params_init();
sec_params_init();
// Start execution.
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
/**
* @brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
//Initialize.
app_trace_init();
leds_init();
scheduler_init();
timers_init();
iot_timer_init();
button_init();
ble_stack_init();
advertising_init();
ip_stack_init ();
//Start execution.
advertising_start();
//Enter main loop.
for (;;)
{
//Execute event schedule.
app_sched_execute();
//Sleep waiting for an application event.
err_code = sd_app_evt_wait();
APP_ERROR_CHECK(err_code);
}
}
/**@brief Function for the application main entry.
*/
int main(void)
{
uint32_t err_code;
timers_init();
gpiote_init();
buttons_init();
ble_stack_init();
device_manager_init();
// Initialize Bluetooth Stack parameters.
gap_params_init();
services_init();
advertising_init();
conn_params_init();
// Start advertising.
advertising_start();
// Enter main loop.
for (;;)
{
// Switch to a low power state until an event is available for the application
err_code = sd_app_evt_wait();
APP_ERROR_CHECK(err_code);
}
}
/**@brief Application main function.
*/
int main(void)
{
// Initialize
leds_init();
buttons_init();
ble_stack_init();
bond_manager_init();
timers_init();
gap_params_init();
advertising_init();
services_init();
sensor_sim_init();
conn_params_init();
sec_params_init();
radio_notification_init();
// Start execution
application_timers_start();
advertising_start();
// Enter main loop
for (;;)
{
power_manage();
}
}
/**@brief Application main function.
*/
int main(void)
{
//printf("main");
uint8_t start_string[] = START_STRING;
uint32_t err_code;
// Initialize.
APP_TIMER_INIT(APP_TIMER_PRESCALER, APP_TIMER_MAX_TIMERS, APP_TIMER_OP_QUEUE_SIZE, false);
APP_GPIOTE_INIT(APP_GPIOTE_MAX_USERS);
ble_stack_init();
//uart_init();
err_code = bsp_init(BSP_INIT_LED | BSP_INIT_BUTTONS,
APP_TIMER_TICKS(100, APP_TIMER_PRESCALER),
NULL);
APP_ERROR_CHECK(err_code);
err_code = bsp_buttons_enable(1 << WAKEUP_BUTTON_ID);
APP_ERROR_CHECK(err_code);
gap_params_init();
services_init();
advertising_init();
conn_params_init();
sec_params_init();
printf("%s",start_string);
advertising_start();
init_leds();
for (;;)
{
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
gpio_config();
bool success = nrf6350_lcd_init();
APP_ERROR_CHECK_BOOL(success);
success = nrf6350_lcd_write_string(" BLE ANCS ", MAX_CHARACTERS_PER_LINE, LCD_UPPER_LINE, 0);
APP_ERROR_CHECK_BOOL(success);
// Initialize.
leds_init();
timers_init();
gpiote_init();
buttons_init();
ble_stack_init();
bond_manager_init();
gap_params_init();
service_add();
advertising_init();
conn_params_init();
sec_params_init();
radio_notification_init();
// Start execution.
advertising_start();
// Enter main loop.
for (;;)
{
power_manage();
}
}
/**
* @brief Function for application main entry.
*/
int main(void)
{
nrf_gpio_cfg_output(SENSORS_ON);
nrf_gpio_pin_set(SENSORS_ON);
ble_stack_init(); // Initialize Bluetooth stack
spi_base_addr = (uint32_t)spi_master_init(SPI0, SPI_MODE0, false);
CC110L_setupspibaseaddr(spi_base_addr);
setup_cc110l();
advertising_init();
// Start execution.
PacketData_Update();
advertising_start();
TWI_init();
MPL3115A2_Init();
HDC1008_Init();
HDC1008_TriggerHumidity();
TWI_powerdown();
ble_radio_notification_init(3, NRF_RADIO_NOTIFICATION_DISTANCE_5500US, radio_notification_evt_handler);
// Enter main loop.
for (;;)
{
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void) {
// Initialize
leds_init();
timers_init();
gpiote_init();
buttons_init();
simple_uart_config(UART_RTS, UART_TX, UART_CTS, UART_RX, 0);
ble_stack_init();
scheduler_init();
gap_params_init();
services_init();
advertising_init();
conn_params_init();
sec_params_init();
// Start execution
//app_button_enable();
advertising_start();
uart_tx_str("nRF51822 run");
// Enter main loop
for (;;) {
app_sched_execute();
power_manage();
}
}
/**@brief Function for application main entry.
*/
int main(void)
{
bool erase_bonds;
// Initialize.
log_init();
timers_init();
buttons_leds_init(&erase_bonds);
power_management_init();
ble_stack_init();
gap_params_init();
gatt_init();
services_init();
advertising_init();
conn_params_init();
peer_manager_init();
// Start execution.
NRF_LOG_INFO("OurCharacteristics tutorial started.");
application_timers_start();
advertising_start(erase_bonds);
// Enter main loop.
for (;;)
{
idle_state_handle();
}
}
/**
* @brief Function for application main entry.
*/
int main(void)
{
uint32_t err_code;
// Initialize.
app_trace_init();
leds_init();
timers_init();
gpiote_init();
err_code = ipv6_transport_init();
APP_ERROR_CHECK(err_code);
// Initialize IP Stack.
ip_stack_init();
APPL_LOG("\r\n");
APPL_LOG("[APPL]: Init complete.\r\n");
// Start execution.
advertising_start();
// Enter main loop.
for (;;)
{
/* Sleep waiting for an application event. */
err_code = sd_app_evt_wait();
APP_ERROR_CHECK(err_code);
}
}
