/**
* \brief Test AT25DFx initialization procedure.
*
* This test calls the initialization function and checks the SerialFlash.
*
* \param test Current test case.
*/
static void run_test_at25dfx_init(const struct test_case *test)
{
at25_status_t status;
/* Initialize the SerialFlash */
at25dfx_initialize();
/* Set the SerialFlash active */
at25dfx_set_mem_active(AT25DFX_MEM_ID);
/* Check if the SerialFlash is valid */
status = at25dfx_mem_check();
/* Validate the SerialFlash init and check function */
test_assert_true(test, status == AT25_SUCCESS,
"Specific SerialFlash not found!");
}
/**
* \brief Application entry point for AT25DFx example.
*
* \return Unused (ANSI-C compatibility).
*/
int main(void)
{
uint16_t i;
sysclk_init();
board_init();
/* Initialize the SerialFlash */
at25dfx_initialize();
/* Set the SerialFlash active */
at25dfx_set_mem_active(AT25DFX_MEM_ID);
/* Unprotect the chip */
if (at25dfx_protect_chip(AT25_TYPE_UNPROTECT) == AT25_SUCCESS) {
LED_On(DATA_FLASH_LED_EXAMPLE_0);
} else {
test_ko();
}
/* Check if the SerialFlash is valid */
if (at25dfx_mem_check() == AT25_SUCCESS) {
LED_On(DATA_FLASH_LED_EXAMPLE_0);
} else {
test_ko();
}
/* Prepare half of the SerialFlash sector as 0xAA */
for (i = 0; i < AT25DFX_TEST_DATA_SIZE / 2; i++) {
ram_buff[i] = 0xAA;
}
/* And the remaining half as 0x55 */
for (; i < AT25DFX_TEST_DATA_SIZE; i++) {
ram_buff[i] = 0x55;
}
/* Erase the block before write */
at25dfx_erase_block(AT25DFX_TEST_BLOCK_ADDR);
/* Write the data to the SerialFlash */
at25dfx_write(ram_buff, AT25DFX_TEST_DATA_SIZE, AT25DFX_TEST_BLOCK_ADDR);
/* Read back this sector and compare them with the expected values */
at25dfx_read(ram_buff, AT25DFX_TEST_DATA_SIZE, AT25DFX_TEST_BLOCK_ADDR);
for (i = 0; i < AT25DFX_TEST_DATA_SIZE / 2; i++) {
if (ram_buff[i] != 0xAA) {
test_ko();
}
}
for (; i < AT25DFX_TEST_DATA_SIZE; i++) {
if (ram_buff[i] != 0x55) {
test_ko();
}
}
/* Write one SerialFlash sector as 0x00, 0x01 .... */
for (i = 0; i < AT25DFX_TEST_DATA_SIZE; i++) {
ram_buff[i] = i;
}
/* Erase the block before write */
at25dfx_erase_block(AT25DFX_TEST_BLOCK_ADDR);
/* Write the data to the SerialFlash */
at25dfx_write(ram_buff, AT25DFX_TEST_DATA_SIZE, AT25DFX_TEST_BLOCK_ADDR);
/* Read back this sector and compare them with the expected values */
at25dfx_read(ram_buff, AT25DFX_TEST_DATA_SIZE, AT25DFX_TEST_BLOCK_ADDR);
for (i = 0; i < AT25DFX_TEST_DATA_SIZE; i++) {
if (ram_buff[i] != (i % 0x100)) {
test_ko();
}
}
LED_On(DATA_FLASH_LED_EXAMPLE_1);
while (1);
}