Exemplo n.º 1
0
void avr_adc_init(avr_t * avr, avr_adc_t * p)
{
	p->io = _io;

	avr_register_io(avr, &p->io);
	avr_register_vector(avr, &p->adc);
	// allocate this module's IRQ
	avr_io_setirqs(&p->io, AVR_IOCTL_ADC_GETIRQ, ADC_IRQ_COUNT, NULL);

	avr_register_io_write(avr, p->r_adcsra, avr_adc_write_adcsra, p);
	avr_register_io_write(avr, p->r_adcsrb, avr_adc_write_adcsrb, p);
	avr_register_io_read(avr, p->r_adcl, avr_adc_read_l, p);
	avr_register_io_read(avr, p->r_adch, avr_adc_read_h, p);
}
Exemplo n.º 2
0
void avr_spi_init(avr_t * avr, avr_spi_t * p)
{
    p->io = _io;

    avr_register_io(avr, &p->io);
    avr_register_vector(avr, &p->spi);
    // allocate this module's IRQ
    avr_io_setirqs(&p->io, AVR_IOCTL_SPI_GETIRQ(p->name), SPI_IRQ_COUNT, NULL);

    avr_register_io_write(avr, p->r_spdr, avr_spi_write, p);
    avr_register_io_read(avr, p->r_spdr, avr_spi_read, p);
}
Exemplo n.º 3
0
void avr_twi_init(avr_t * avr, avr_twi_t * p)
{
	p->io = _io;
	avr_register_io(avr, &p->io);
	avr_register_vector(avr, &p->twi);

	//printf("%s TWI%c init\n", __FUNCTION__, p->name);

	// allocate this module's IRQ
	avr_io_setirqs(&p->io, AVR_IOCTL_TWI_GETIRQ(p->name), TWI_IRQ_COUNT, NULL);

	avr_register_io_write(avr, p->twen.reg, avr_twi_write, p);
	avr_register_io_write(avr, p->r_twdr, avr_twi_write_data, p);
	avr_register_io_read(avr, p->r_twdr, avr_twi_read_data, p);
	avr_register_io_write(avr, p->twsr.reg, avr_twi_write_status, p);
}
Exemplo n.º 4
0
static void avr_timer_reset(avr_io_t * port)
{
	avr_timer_t * p = (avr_timer_t *)port;
	avr_cycle_timer_cancel(p->io.avr, avr_timer_tov, p);
	avr_cycle_timer_cancel(p->io.avr, avr_timer_compa, p);
	avr_cycle_timer_cancel(p->io.avr, avr_timer_compb, p);
	avr_cycle_timer_cancel(p->io.avr, avr_timer_compc, p);

	// check to see if the comparators have a pin output. If they do,
	// (try) to get the ioport corresponding IRQ and connect them
	// they will automagically be triggered when the comparator raises
	// it's own IRQ
	for (int compi = 0; compi < AVR_TIMER_COMP_COUNT; compi++) {
		p->comp[compi].comp_cycles = 0;

		avr_ioport_getirq_t req = {
			.bit = p->comp[compi].com_pin
		};
		if (avr_ioctl(port->avr, AVR_IOCTL_IOPORT_GETIRQ_REGBIT, &req) > 0) {
			// cool, got an IRQ
//			printf("%s-%c COMP%c Connecting PIN IRQ %d\n", __FUNCTION__, p->name, 'A'+compi, req.irq[0]->irq);
			avr_connect_irq(&port->irq[TIMER_IRQ_OUT_COMP + compi], req.irq[0]);
		}
	}
	avr_ioport_getirq_t req = {
		.bit = p->icp
	};
	if (avr_ioctl(port->avr, AVR_IOCTL_IOPORT_GETIRQ_REGBIT, &req) > 0) {
		// cool, got an IRQ for the input capture pin
//		printf("%s-%c ICP Connecting PIN IRQ %d\n", __FUNCTION__, p->name, req.irq[0]->irq);
		avr_irq_register_notify(req.irq[0], avr_timer_irq_icp, p);
	}

}

static const char * irq_names[TIMER_IRQ_COUNT] = {
	[TIMER_IRQ_OUT_PWM0] = "8>pwm0",
	[TIMER_IRQ_OUT_PWM1] = "8>pwm1",
	[TIMER_IRQ_OUT_COMP + 0] = ">compa",
	[TIMER_IRQ_OUT_COMP + 1] = ">compb",
	[TIMER_IRQ_OUT_COMP + 2] = ">compc",
};

static	avr_io_t	_io = {
	.kind = "timer",
	.reset = avr_timer_reset,
	.irq_names = irq_names,
};

void avr_timer_init(avr_t * avr, avr_timer_t * p)
{
	p->io = _io;

	avr_register_io(avr, &p->io);
	avr_register_vector(avr, &p->overflow);
	avr_register_vector(avr, &p->icr);

	// allocate this module's IRQ
	avr_io_setirqs(&p->io, AVR_IOCTL_TIMER_GETIRQ(p->name), TIMER_IRQ_COUNT, NULL);

	// marking IRQs as "filtered" means they don't propagate if the
	// new value raised is the same as the last one.. in the case of the
	// pwm value it makes sense not to bother.
	p->io.irq[TIMER_IRQ_OUT_PWM0].flags |= IRQ_FLAG_FILTERED;
	p->io.irq[TIMER_IRQ_OUT_PWM1].flags |= IRQ_FLAG_FILTERED;

	if (p->wgm[0].reg) // these are not present on older AVRs
		avr_register_io_write(avr, p->wgm[0].reg, avr_timer_write, p);
	avr_register_io_write(avr, p->cs[0].reg, avr_timer_write, p);

	// this assumes all the "pending" interrupt bits are in the same
	// register. Might not be true on all devices ?
	avr_register_io_write(avr, p->overflow.raised.reg, avr_timer_write_pending, p);

	/*
	 * Even if the timer is 16 bits, we don't care to have watches on the
	 * high bytes because the datasheet says that the low address is always
	 * the trigger.
	 */
	for (int compi = 0; compi < AVR_TIMER_COMP_COUNT; compi++) {
		avr_register_vector(avr, &p->comp[compi].interrupt);

		if (p->comp[compi].r_ocr) // not all timers have all comparators
			avr_register_io_write(avr, p->comp[compi].r_ocr, avr_timer_write_ocr, p);
	}
	avr_register_io_write(avr, p->r_tcnt, avr_timer_tcnt_write, p);
	avr_register_io_read(avr, p->r_tcnt, avr_timer_tcnt_read, p);
}