void
loader_main(struct loader_callbacks *cb, void *arg, int version, int ndisks)
{
static char mallocbuf[MALLOCSZ];
const char *var;
int i;
if (version < USERBOOT_VERSION)
abort();
callbacks = cb;
callbacks_arg = arg;
userboot_disk_maxunit = ndisks;
/*
* initialise the heap as early as possible. Once this is done,
* alloc() is usable.
*/
setheap((void *)mallocbuf, (void *)(mallocbuf + sizeof(mallocbuf)));
/*
* Hook up the console
*/
cons_probe();
printf("\n");
printf("%s, Revision %s\n", bootprog_name, bootprog_rev);
printf("(%s, %s)\n", bootprog_maker, bootprog_date);
#if 0
printf("Memory: %ld k\n", memsize() / 1024);
#endif
setenv("LINES", "24", 1); /* optional */
/*
* Set custom environment variables
*/
i = 0;
while (1) {
var = CALLBACK(getenv, i++);
if (var == NULL)
break;
putenv(var);
}
archsw.arch_autoload = userboot_autoload;
archsw.arch_getdev = userboot_getdev;
archsw.arch_copyin = userboot_copyin;
archsw.arch_copyout = userboot_copyout;
archsw.arch_readin = userboot_readin;
#if defined(USERBOOT_ZFS_SUPPORT)
archsw.arch_zfs_probe = userboot_zfs_probe;
#endif
/*
* Initialise the block cache. Set the upper limit.
*/
bcache_init(32768, 512);
/*
* March through the device switch probing for things.
*/
for (i = 0; devsw[i] != NULL; i++)
if (devsw[i]->dv_init != NULL)
(devsw[i]->dv_init)();
extract_currdev();
if (setjmp(jb))
return;
interact(NULL); /* doesn't return */
exit(0);
}
int
main(int (*openfirm)(void *))
{
char bootpath[64];
struct devsw **dp;
phandle_t chosenh;
/*
* Tell the OpenFirmware functions where they find the ofw gate.
*/
OF_init(openfirm);
archsw.arch_getdev = ofw_getdev;
archsw.arch_copyin = sparc64_copyin;
archsw.arch_copyout = ofw_copyout;
archsw.arch_readin = sparc64_readin;
archsw.arch_autoload = sparc64_autoload;
init_heap();
setheap((void *)heapva, (void *)(heapva + HEAPSZ));
/*
* Probe for a console.
*/
cons_probe();
tlb_init();
bcache_init(32, 512);
/*
* Initialize devices.
*/
for (dp = devsw; *dp != 0; dp++) {
if ((*dp)->dv_init != 0)
(*dp)->dv_init();
}
/*
* Set up the current device.
*/
chosenh = OF_finddevice("/chosen");
OF_getprop(chosenh, "bootpath", bootpath, sizeof(bootpath));
/*
* Sun compatible bootable CD-ROMs have a disk label placed
* before the cd9660 data, with the actual filesystem being
* in the first partition, while the other partitions contain
* pseudo disk labels with embedded boot blocks for different
* architectures, which may be followed by UFS filesystems.
* The firmware will set the boot path to the partition it
* boots from ('f' in the sun4u case), but we want the kernel
* to be loaded from the cd9660 fs ('a'), so the boot path
* needs to be altered.
*/
if (bootpath[strlen(bootpath) - 2] == ':' &&
bootpath[strlen(bootpath) - 1] == 'f') {
bootpath[strlen(bootpath) - 1] = 'a';
printf("Boot path set to %s\n", bootpath);
}
env_setenv("currdev", EV_VOLATILE, bootpath,
ofw_setcurrdev, env_nounset);
env_setenv("loaddev", EV_VOLATILE, bootpath,
env_noset, env_nounset);
printf("\n");
printf("%s, Revision %s\n", bootprog_name, bootprog_rev);
printf("(%s, %s)\n", bootprog_maker, bootprog_date);
printf("bootpath=\"%s\"\n", bootpath);
/* Give control to the machine independent loader code. */
interact();
return 1;
}
EFI_STATUS
main(int argc, CHAR16 *argv[])
{
EFI_LOADED_IMAGE *img;
int i;
/*
* XXX Chicken-and-egg problem; we want to have console output
* early, but some console attributes may depend on reading from
* eg. the boot device, which we can't do yet. We can use
* printf() etc. once this is done.
*/
cons_probe();
/*
* Initialise the block cache
*/
bcache_init(32, 512); /* 16k XXX tune this */
find_pal_proc();
/*
* March through the device switch probing for things.
*/
for (i = 0; devsw[i] != NULL; i++)
if (devsw[i]->dv_init != NULL)
(devsw[i]->dv_init)();
efinet_init_driver();
/* Get our loaded image protocol interface structure. */
BS->HandleProtocol(IH, &imgid, (VOID**)&img);
printf("Image base: 0x%016lx\n", (u_long)img->ImageBase);
printf("\n");
printf("%s, Revision %s\n", bootprog_name, bootprog_rev);
printf("(%s, %s)\n", bootprog_maker, bootprog_date);
i = efifs_get_unit(img->DeviceHandle);
if (i >= 0) {
currdev.d_dev = devsw[0]; /* XXX disk */
currdev.d_kind.efidisk.unit = i;
/* XXX should be able to detect this, default to autoprobe */
currdev.d_kind.efidisk.slice = -1;
currdev.d_kind.efidisk.partition = 0;
} else {
currdev.d_dev = devsw[1]; /* XXX net */
currdev.d_kind.netif.unit = 0; /* XXX */
}
currdev.d_type = currdev.d_dev->dv_type;
/*
* Disable the watchdog timer. By default the boot manager sets
* the timer to 5 minutes before invoking a boot option. If we
* want to return to the boot manager, we have to disable the
* watchdog timer and since we're an interactive program, we don't
* want to wait until the user types "quit". The timer may have
* fired by then. We don't care if this fails. It does not prevent
* normal functioning in any way...
*/
BS->SetWatchdogTimer(0, 0, 0, NULL);
env_setenv("currdev", EV_VOLATILE, efi_fmtdev(&currdev),
efi_setcurrdev, env_nounset);
env_setenv("loaddev", EV_VOLATILE, efi_fmtdev(&currdev), env_noset,
env_nounset);
setenv("LINES", "24", 1); /* optional */
archsw.arch_autoload = efi_autoload;
archsw.arch_getdev = efi_getdev;
archsw.arch_copyin = efi_copyin;
archsw.arch_copyout = efi_copyout;
archsw.arch_readin = efi_readin;
interact(); /* doesn't return */
return (EFI_SUCCESS); /* keep compiler happy */
}
EFI_STATUS
main(int argc, CHAR16 *argv[])
{
char var[128];
EFI_LOADED_IMAGE *img;
EFI_GUID *guid;
int i, j, vargood, unit, howto;
struct devsw *dev;
uint64_t pool_guid;
UINTN k;
int has_kbd;
archsw.arch_autoload = efi_autoload;
archsw.arch_getdev = efi_getdev;
archsw.arch_copyin = efi_copyin;
archsw.arch_copyout = efi_copyout;
archsw.arch_readin = efi_readin;
#ifdef EFI_ZFS_BOOT
/* Note this needs to be set before ZFS init. */
archsw.arch_zfs_probe = efi_zfs_probe;
#endif
has_kbd = has_keyboard();
/*
* XXX Chicken-and-egg problem; we want to have console output
* early, but some console attributes may depend on reading from
* eg. the boot device, which we can't do yet. We can use
* printf() etc. once this is done.
*/
cons_probe();
/*
* Initialise the block cache. Set the upper limit.
*/
bcache_init(32768, 512);
/*
* Parse the args to set the console settings, etc
* boot1.efi passes these in, if it can read /boot.config or /boot/config
* or iPXE may be setup to pass these in.
*
* Loop through the args, and for each one that contains an '=' that is
* not the first character, add it to the environment. This allows
* loader and kernel env vars to be passed on the command line. Convert
* args from UCS-2 to ASCII (16 to 8 bit) as they are copied.
*/
howto = 0;
for (i = 1; i < argc; i++) {
if (argv[i][0] == '-') {
for (j = 1; argv[i][j] != 0; j++) {
int ch;
ch = argv[i][j];
switch (ch) {
case 'a':
howto |= RB_ASKNAME;
break;
case 'd':
howto |= RB_KDB;
break;
case 'D':
howto |= RB_MULTIPLE;
break;
case 'h':
howto |= RB_SERIAL;
break;
case 'm':
howto |= RB_MUTE;
break;
case 'p':
howto |= RB_PAUSE;
break;
case 'P':
if (!has_kbd)
howto |= RB_SERIAL | RB_MULTIPLE;
break;
case 'r':
howto |= RB_DFLTROOT;
break;
case 's':
howto |= RB_SINGLE;
break;
case 'S':
if (argv[i][j + 1] == 0) {
if (i + 1 == argc) {
setenv("comconsole_speed", "115200", 1);
} else {
cp16to8(&argv[i + 1][0], var,
sizeof(var));
setenv("comconsole_speedspeed", var, 1);
}
i++;
break;
} else {
cp16to8(&argv[i][j + 1], var,
sizeof(var));
setenv("comconsole_speed", var, 1);
break;
}
case 'v':
howto |= RB_VERBOSE;
break;
}
}
} else {
vargood = 0;
for (j = 0; argv[i][j] != 0; j++) {
if (j == sizeof(var)) {
vargood = 0;
break;
}
if (j > 0 && argv[i][j] == '=')
vargood = 1;
var[j] = (char)argv[i][j];
}
if (vargood) {
var[j] = 0;
putenv(var);
}
}
}
for (i = 0; howto_names[i].ev != NULL; i++)
if (howto & howto_names[i].mask)
setenv(howto_names[i].ev, "YES", 1);
if (howto & RB_MULTIPLE) {
if (howto & RB_SERIAL)
setenv("console", "comconsole efi" , 1);
else
setenv("console", "efi comconsole" , 1);
} else if (howto & RB_SERIAL) {
setenv("console", "comconsole" , 1);
}
if (efi_copy_init()) {
printf("failed to allocate staging area\n");
return (EFI_BUFFER_TOO_SMALL);
}
/*
* March through the device switch probing for things.
*/
for (i = 0; devsw[i] != NULL; i++)
if (devsw[i]->dv_init != NULL)
(devsw[i]->dv_init)();
/* Get our loaded image protocol interface structure. */
BS->HandleProtocol(IH, &imgid, (VOID**)&img);
printf("Command line arguments:");
for (i = 0; i < argc; i++) {
printf(" ");
print_str16(argv[i]);
}
printf("\n");
printf("Image base: 0x%lx\n", (u_long)img->ImageBase);
printf("EFI version: %d.%02d\n", ST->Hdr.Revision >> 16,
ST->Hdr.Revision & 0xffff);
printf("EFI Firmware: ");
/* printf doesn't understand EFI Unicode */
ST->ConOut->OutputString(ST->ConOut, ST->FirmwareVendor);
printf(" (rev %d.%02d)\n", ST->FirmwareRevision >> 16,
ST->FirmwareRevision & 0xffff);
printf("\n");
printf("%s, Revision %s\n", bootprog_name, bootprog_rev);
printf("(%s, %s)\n", bootprog_maker, bootprog_date);
/*
* Disable the watchdog timer. By default the boot manager sets
* the timer to 5 minutes before invoking a boot option. If we
* want to return to the boot manager, we have to disable the
* watchdog timer and since we're an interactive program, we don't
* want to wait until the user types "quit". The timer may have
* fired by then. We don't care if this fails. It does not prevent
* normal functioning in any way...
*/
BS->SetWatchdogTimer(0, 0, 0, NULL);
if (efi_handle_lookup(img->DeviceHandle, &dev, &unit, &pool_guid) != 0)
return (EFI_NOT_FOUND);
switch (dev->dv_type) {
#ifdef EFI_ZFS_BOOT
case DEVT_ZFS: {
struct zfs_devdesc currdev;
currdev.d_dev = dev;
currdev.d_unit = unit;
currdev.d_type = currdev.d_dev->dv_type;
currdev.d_opendata = NULL;
currdev.pool_guid = pool_guid;
currdev.root_guid = 0;
env_setenv("currdev", EV_VOLATILE, efi_fmtdev(&currdev),
efi_setcurrdev, env_nounset);
env_setenv("loaddev", EV_VOLATILE, efi_fmtdev(&currdev), env_noset,
env_nounset);
init_zfs_bootenv(zfs_fmtdev(&currdev));
break;
}
#endif
default: {
struct devdesc currdev;
currdev.d_dev = dev;
currdev.d_unit = unit;
currdev.d_opendata = NULL;
currdev.d_type = currdev.d_dev->dv_type;
env_setenv("currdev", EV_VOLATILE, efi_fmtdev(&currdev),
efi_setcurrdev, env_nounset);
env_setenv("loaddev", EV_VOLATILE, efi_fmtdev(&currdev), env_noset,
env_nounset);
break;
}
}
setenv("LINES", "24", 1); /* optional */
for (k = 0; k < ST->NumberOfTableEntries; k++) {
guid = &ST->ConfigurationTable[k].VendorGuid;
if (!memcmp(guid, &smbios, sizeof(EFI_GUID))) {
smbios_detect(ST->ConfigurationTable[k].VendorTable);
break;
}
}
interact(NULL); /* doesn't return */
return (EFI_SUCCESS); /* keep compiler happy */
}
int
main(void)
{
char *memend;
int i;
WDEBUG_INIT();
WDEBUG('X');
/* Pick up arguments */
kargs = (void *)__args;
initial_howto = kargs->howto;
initial_bootdev = kargs->bootdev;
initial_bootinfo = kargs->bootinfo ? (struct bootinfo *)PTOV(kargs->bootinfo) : NULL;
#ifdef COMCONSOLE_DEBUG
printf("args at %p initial_howto = %08x bootdev = %08x bootinfo = %p\n",
kargs, initial_howto, initial_bootdev, initial_bootinfo);
#endif
/* Initialize the v86 register set to a known-good state. */
bzero(&v86, sizeof(v86));
v86.efl = PSL_RESERVED_DEFAULT | PSL_I;
/*
* Initialize the heap as early as possible. Once this is done,
* malloc() is usable.
*
* Don't include our stack in the heap. If the stack is in low
* user memory use {end,bios_basemem}. If the stack is in high
* user memory but not extended memory then don't let the heap
* overlap the stack. If the stack is in extended memory limit
* the heap to bios_basemem.
*
* Be sure to use the virtual bios_basemem address rather then
* the physical bios_basemem address or we may overwrite BIOS
* data.
*/
bios_getmem();
memend = (char *)&memend - 0x8000; /* space for stack (16K) */
memend = (char *)((uintptr_t)memend & ~(uintptr_t)(0x1000 - 1));
/*
* For day to day usage simple memend setup is more than engouh,
* but bigger heap is a must for loading bzipp'ed kernel/modules
* "bzf_read: BZ2_bzDecompress returned -3"
*/
#if defined(LOADER_BZIP2_SUPPORT)
if (high_heap_size > 0) {
heap_top = PTOV(high_heap_base + high_heap_size);
heap_bottom = PTOV(high_heap_base);
if (high_heap_base < memtop_copyin)
memtop_copyin = high_heap_base;
} else
#endif
if (memend < (char *)_end) {
heap_top = PTOV(bios_basemem);
heap_bottom = (void *)_end;
} else {
if (memend > (char *)PTOV(bios_basemem))
memend = (char *)PTOV(bios_basemem);
heap_top = memend;
heap_bottom = (void *)_end;
}
setheap(heap_bottom, heap_top);
/*
* XXX Chicken-and-egg problem; we want to have console output early,
* but some console attributes may depend on reading from eg. the boot
* device, which we can't do yet.
*
* We can use printf() etc. once this is done. The previous boot stage
* might have requested a video or serial preference, in which case we
* set it.
*/
bi_setboothowto(initial_howto);
if (initial_howto & RB_MUTE) {
setenv("console", "nullconsole", 1);
} else if ((initial_howto & (RB_VIDEO|RB_SERIAL)) == (RB_VIDEO|RB_SERIAL)) {
setenv("console", "vidconsole comconsole", 1);
} else if (initial_howto & RB_VIDEO) {
setenv("console", "vidconsole", 1);
} else if (initial_howto & RB_SERIAL) {
setenv("console", "comconsole", 1);
} else {
/* XXX leave to cons_probe() */
}
cons_probe();
/*
* Initialise the block cache
*/
bcache_init(32, 512); /* 16k cache XXX tune this */
/*
* Special handling for PXE and CD booting.
*/
if (kargs->bootinfo == 0) {
/*
* We only want the PXE disk to try to init itself in the below
* walk through devsw if we actually booted off of PXE.
*/
if (kargs->bootflags & KARGS_FLAGS_PXE)
pxe_enable(kargs->pxeinfo ? PTOV(kargs->pxeinfo) : NULL);
else if (kargs->bootflags & KARGS_FLAGS_CD)
bc_add(initial_bootdev);
}
archsw.arch_autoload = i386_autoload;
archsw.arch_getdev = i386_getdev;
archsw.arch_copyin = i386_copyin;
archsw.arch_copyout = i386_copyout;
archsw.arch_readin = i386_readin;
archsw.arch_isainb = isa_inb;
archsw.arch_isaoutb = isa_outb;
/*
* March through the device switch probing for things.
*/
for (i = 0; devsw[i] != NULL; i++) {
WDEBUG('M' + i);
if (devsw[i]->dv_init != NULL)
(devsw[i]->dv_init)();
WDEBUG('M' + i);
}
printf("BIOS %dkB/%dkB available memory\n",
bios_basemem / 1024, bios_extmem / 1024);
if (initial_bootinfo != NULL) {
initial_bootinfo->bi_basemem = bios_basemem / 1024;
initial_bootinfo->bi_extmem = bios_extmem / 1024;
}
/* detect ACPI for future reference */
biosacpi_detect();
/* detect SMBIOS for future reference */
smbios_detect(NULL);
/* detect PCI BIOS for future reference */
biospci_detect();
/* enable EHCI */
setenv("ehci_load", "YES", 1);
/* enable XHCI */
setenv("xhci_load", "YES", 1);
printf("\n");
printf("%s, Revision %s\n", bootprog_name, bootprog_rev);
printf("(%s, %s)\n", bootprog_maker, bootprog_date);
extract_currdev(); /* set $currdev and $loaddev */
setenv("LINES", "24", 1); /* optional */
bios_getsmap();
interact(); /* doesn't return */
/* if we ever get here, it is an error */
return (1);
}
int
main(void)
{
int i;
/* Set machine type to PC98_SYSTEM_PARAMETER. */
set_machine_type();
/* Pick up arguments */
kargs = (void *)__args;
initial_howto = kargs->howto;
initial_bootdev = kargs->bootdev;
initial_bootinfo = kargs->bootinfo ? (struct bootinfo *)PTOV(kargs->bootinfo) : NULL;
/* Initialize the v86 register set to a known-good state. */
bzero(&v86, sizeof(v86));
v86.efl = PSL_RESERVED_DEFAULT | PSL_I;
/*
* Initialise the heap as early as possible. Once this is done, malloc() is usable.
*/
bios_getmem();
#if defined(LOADER_BZIP2_SUPPORT)
if (high_heap_size > 0) {
heap_top = PTOV(high_heap_base + high_heap_size);
heap_bottom = PTOV(high_heap_base);
if (high_heap_base < memtop_copyin)
memtop_copyin = high_heap_base;
} else
#endif
{
heap_top = (void *)PTOV(bios_basemem);
heap_bottom = (void *)end;
}
setheap(heap_bottom, heap_top);
/*
* XXX Chicken-and-egg problem; we want to have console output early, but some
* console attributes may depend on reading from eg. the boot device, which we
* can't do yet.
*
* We can use printf() etc. once this is done.
* If the previous boot stage has requested a serial console, prefer that.
*/
bi_setboothowto(initial_howto);
if (initial_howto & RB_MULTIPLE) {
if (initial_howto & RB_SERIAL)
setenv("console", "comconsole vidconsole", 1);
else
setenv("console", "vidconsole comconsole", 1);
} else if (initial_howto & RB_SERIAL)
setenv("console", "comconsole", 1);
else if (initial_howto & RB_MUTE)
setenv("console", "nullconsole", 1);
cons_probe();
/*
* Initialise the block cache
*/
bcache_init(32, 512); /* 16k cache XXX tune this */
/*
* Special handling for PXE and CD booting.
*/
if (kargs->bootinfo == 0) {
/*
* We only want the PXE disk to try to init itself in the below
* walk through devsw if we actually booted off of PXE.
*/
if (kargs->bootflags & KARGS_FLAGS_PXE)
pxe_enable(kargs->pxeinfo ? PTOV(kargs->pxeinfo) : NULL);
else if (kargs->bootflags & KARGS_FLAGS_CD)
bc_add(initial_bootdev);
}
archsw.arch_autoload = i386_autoload;
archsw.arch_getdev = i386_getdev;
archsw.arch_copyin = i386_copyin;
archsw.arch_copyout = i386_copyout;
archsw.arch_readin = i386_readin;
archsw.arch_isainb = isa_inb;
archsw.arch_isaoutb = isa_outb;
archsw.arch_loadaddr = pc98_loadaddr;
/*
* March through the device switch probing for things.
*/
for (i = 0; devsw[i] != NULL; i++)
if (devsw[i]->dv_init != NULL)
(devsw[i]->dv_init)();
printf("BIOS %dkB/%dkB available memory\n", bios_basemem / 1024, bios_extmem / 1024);
if (initial_bootinfo != NULL) {
initial_bootinfo->bi_basemem = bios_basemem / 1024;
initial_bootinfo->bi_extmem = bios_extmem / 1024;
}
printf("\n");
printf("%s, Revision %s\n", bootprog_name, bootprog_rev);
printf("(%s, %s)\n", bootprog_maker, bootprog_date);
extract_currdev(); /* set $currdev and $loaddev */
setenv("LINES", "24", 1); /* optional */
interact(); /* doesn't return */
/* if we ever get here, it is an error */
return (1);
}
int main(int argc, char **argv)
{
pthread_t sigth;
sigset_t sigblock;
int logflags = 0;
int ret = 1;
debug_init();
sigemptyset(&sigblock);
sigaddset(&sigblock, SIGHUP);
sigaddset(&sigblock, SIGINT);
sigaddset(&sigblock, SIGTERM);
#ifdef ENABLE_VT
sigaddset(&sigblock, SIGPIPE);
#endif
pthread_sigmask(SIG_BLOCK, &sigblock, NULL);
if (conf_parse(&conf, argc, argv))
return 1;
if (conf.debug_level > 0)
logflags = LOG_PERROR;
openlog(basename(argv[0]), LOG_PID|logflags, LOG_DAEMON);
syslog(LOG_INFO, "%s v%s started (%s)", PACKAGE_NAME, PACKAGE_VERSION,
entity_string[conf.mip6_entity]);
#ifdef ENABLE_VT
if (vt_init() < 0)
goto vt_failed;
#endif
/* if not debugging, detach from tty */
if (conf.debug_level == 0)
daemon_start(1);
else {
/* if debugging with debug log file, detach from tty */
if (conf.debug_log_file) {
daemon_start(1);
ret = debug_open(conf.debug_log_file);
if (ret < 0) {
fprintf(stderr, "can't init debug log:%s\n",
strerror(-ret));
goto debug_failed;
}
dbg("%s started in debug mode\n", PACKAGE_NAME);
} else {
dbg("%s started in debug mode, not detaching from terminal\n",
PACKAGE_NAME);
}
conf_show(&conf);
}
srandom(time(NULL));
if (rr_cn_init() < 0)
goto rr_cn_failed;
if (policy_init() < 0)
goto policy_failed;
if (taskqueue_init() < 0)
goto taskqueue_failed;
if (bcache_init() < 0)
goto bcache_failed;
if (mh_init() < 0)
goto mh_failed;
if (icmp6_init() < 0)
goto icmp6_failed;
if (xfrm_init() < 0)
goto xfrm_failed;
cn_init();
if ((is_ha() || is_mn()) && tunnelctl_init() < 0)
goto tunnelctl_failed;
if (is_ha() && ha_init() < 0)
goto ha_failed;
if (is_mn() && mn_init() < 0)
goto mn_failed;
#ifdef ENABLE_VT
if (vt_start(conf.vt_hostname, conf.vt_service) < 0)
goto vt_start_failed;
#endif
if (pthread_create(&sigth, NULL, sigh, NULL))
goto sigth_failed;
pthread_join(sigth, NULL);
ret = 0;
sigth_failed:
#ifdef ENABLE_VT
vt_fini();
vt_start_failed:
#endif
if (is_mn())
mn_cleanup();
mn_failed:
if (is_ha())
ha_cleanup();
ha_failed:
if (is_ha() || is_mn())
tunnelctl_cleanup();
tunnelctl_failed:
cn_cleanup();
xfrm_cleanup();
xfrm_failed:
icmp6_cleanup();
icmp6_failed:
mh_cleanup();
mh_failed:
bcache_cleanup();
bcache_failed:
taskqueue_destroy();
taskqueue_failed:
policy_cleanup();
policy_failed:
rr_cn_failed:
debug_close();
debug_failed:
#ifdef ENABLE_VT
vt_failed:
#endif
syslog(LOG_INFO, "%s v%s stopped (%s)", PACKAGE_NAME, PACKAGE_VERSION,
entity_string[conf.mip6_entity]);
closelog();
return ret;
}
