/**@brief Initialize services that will be used by the application.
*
* @details Initialize the Cycling Speed and Cadence, Battery and Device Information services.
*/
static void services_init(void)
{
uint32_t err_code;
ble_cscs_init_t cscs_init;
ble_bas_init_t bas_init;
ble_dis_init_t dis_init;
// Initialize Cycling Speed and Cadence Service
memset(&cscs_init, 0, sizeof(cscs_init));
cscs_init.evt_handler = NULL;
cscs_init.feature = BLE_CSCS_FEATURE_WHEEL_REV_BIT | BLE_CSCS_FEATURE_CRANK_REV_BIT;
// Here the sec level for the Cycling Speed and Cadence Service can be changed/increased.
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cscs_init.csc_meas_attr_md.cccd_write_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&cscs_init.csc_meas_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&cscs_init.csc_meas_attr_md.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cscs_init.csc_feature_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&cscs_init.csc_feature_attr_md.write_perm);
err_code = ble_cscs_init(&m_cscs, &cscs_init);
APP_ERROR_CHECK(err_code);
// Initialize Battery Service
memset(&bas_init, 0, sizeof(bas_init));
// Here the sec level for the Battery Service can be changed/increased.
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.cccd_write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&bas_init.battery_level_char_attr_md.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_report_read_perm);
bas_init.evt_handler = NULL;
bas_init.support_notification = true;
bas_init.p_report_ref = NULL;
bas_init.initial_batt_level = 100;
err_code = ble_bas_init(&m_bas, &bas_init);
APP_ERROR_CHECK(err_code);
// Initialize Device Information Service
memset(&dis_init, 0, sizeof(dis_init));
ble_srv_ascii_to_utf8(&dis_init.manufact_name_str, MANUFACTURER_NAME);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&dis_init.dis_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&dis_init.dis_attr_md.write_perm);
err_code = ble_dis_init(&dis_init);
APP_ERROR_CHECK(err_code);
}
/**@brief Function for initializing services that will be used by the application.
*
* @details Initialize the Cycling Speed and Cadence, Battery and Device Information services.
*/
static void services_init(void)
{
uint32_t err_code;
ble_cscs_init_t cscs_init;
ble_bas_init_t bas_init;
ble_dis_init_t dis_init;
ble_sensor_location_t sensor_location;
// Initialize Cycling Speed and Cadence Service.
memset(&cscs_init, 0, sizeof(cscs_init));
cscs_init.evt_handler = NULL;
cscs_init.feature = BLE_CSCS_FEATURE_WHEEL_REV_BIT | BLE_CSCS_FEATURE_CRANK_REV_BIT | BLE_CSCS_FEATURE_MULTIPLE_SENSORS_BIT;
// Here the sec level for the Cycling Speed and Cadence Service can be changed/increased.
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cscs_init.csc_meas_attr_md.cccd_write_perm); // for the measurement characteristic, only the CCCD write permission can be set by the application, others are mandated by service specification
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cscs_init.csc_feature_attr_md.read_perm); // for the feature characteristic, only the read permission can be set by the application, others are mandated by service specification
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cscs_init.csc_ctrlpt_attr_md.write_perm); // for the SC control point characteristic, only the write permission and CCCD write can be set by the application, others are mandated by service specification
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cscs_init.csc_ctrlpt_attr_md.cccd_write_perm); // for the SC control point characteristic, only the write permission and CCCD write can be set by the application, others are mandated by service specification
cscs_init.ctrplt_supported_functions = BLE_SRV_SC_CTRLPT_CUM_VAL_OP_SUPPORTED
|BLE_SRV_SC_CTRLPT_SENSOR_LOCATIONS_OP_SUPPORTED
|BLE_SRV_SC_CTRLPT_START_CALIB_OP_SUPPORTED;
cscs_init.ctrlpt_evt_handler = sc_ctrlpt_event_handler;
cscs_init.list_supported_locations = supported_locations;
cscs_init.size_list_supported_locations = sizeof(supported_locations) / sizeof(ble_sensor_location_t);
sensor_location = BLE_SENSOR_LOCATION_FRONT_WHEEL; // initializes the sensor location to add the sensor location characteristic.
cscs_init.sensor_location = &sensor_location;
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&cscs_init.csc_sensor_loc_attr_md.read_perm); // for the sensor location characteristic, only the read permission can be set by the application, others are mendated by service specification
err_code = ble_cscs_init(&m_cscs, &cscs_init);
APP_ERROR_CHECK(err_code);
// Initialize Battery Service.
memset(&bas_init, 0, sizeof(bas_init));
// Here the sec level for the Battery Service can be changed/increased.
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.cccd_write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_char_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&bas_init.battery_level_char_attr_md.write_perm);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&bas_init.battery_level_report_read_perm);
bas_init.evt_handler = NULL;
bas_init.support_notification = true;
bas_init.p_report_ref = NULL;
bas_init.initial_batt_level = 100;
err_code = ble_bas_init(&m_bas, &bas_init);
APP_ERROR_CHECK(err_code);
// Initialize Device Information Service.
memset(&dis_init, 0, sizeof(dis_init));
ble_srv_ascii_to_utf8(&dis_init.manufact_name_str, MANUFACTURER_NAME);
BLE_GAP_CONN_SEC_MODE_SET_OPEN(&dis_init.dis_attr_md.read_perm);
BLE_GAP_CONN_SEC_MODE_SET_NO_ACCESS(&dis_init.dis_attr_md.write_perm);
err_code = ble_dis_init(&dis_init);
APP_ERROR_CHECK(err_code);
}
