int main(int argc, const char * argv[]){
/// GET STARTED with BTstack ///
btstack_memory_init();
btstack_run_loop_init(btstack_run_loop_posix_get_instance());
// use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT
hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER);
// init HCI
hci_init(hci_transport_usb_instance(), NULL);
hci_set_link_key_db(btstack_link_key_db_fs_instance());
// inform about BTstack state
hci_event_callback_registration.callback = &packet_handler;
hci_add_event_handler(&hci_event_callback_registration);
// handle CTRL-c
signal(SIGINT, sigint_handler);
// setup app
btstack_main(argc, argv);
// go
btstack_run_loop_execute();
return 0;
}
// main
int app_main(void){
printf("BTstack: setup\n");
// enable packet logger
hci_dump_open(NULL, HCI_DUMP_STDOUT);
/// GET STARTED with BTstack ///
btstack_memory_init();
btstack_run_loop_init(btstack_run_loop_freertos_get_instance());
// init HCI
hci_init(transport_get_instance(), NULL);
// setup TLV ESP32 implementation
const btstack_tlv_t * btstack_tlv_impl = btstack_tlv_esp32_get_instance();
// setup Link Key DB using TLV
const btstack_link_key_db_t * btstack_link_key_db = btstack_link_key_db_tlv_get_instance(btstack_tlv_impl, NULL);
hci_set_link_key_db(btstack_link_key_db);
// setup LE Device DB using TLV
le_device_db_tlv_configure(btstack_tlv_impl, NULL);
// inform about BTstack state
hci_event_callback_registration.callback = &packet_handler;
hci_add_event_handler(&hci_event_callback_registration);
btstack_main(0, NULL);
printf("BTstack: execute run loop\n");
btstack_run_loop_execute();
return 0;
}
// main
int main(void){
hw_setup();
btstack_setup();
btstack_main(0, NULL);
btstack_run_loop_execute();
return 0;
}
int main(int argc, const char * argv[]){
/// GET STARTED with BTstack ///
btstack_memory_init();
btstack_run_loop_init(btstack_run_loop_posix_get_instance());
// use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT
hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER);
// pick serial port
// config.device_name = "/dev/tty.usbserial-A900K2WS"; // DFROBOT
// config.device_name = "/dev/tty.usbserial-A50285BI"; // BOOST-CC2564MODA New
// config.device_name = "/dev/tty.usbserial-A9OVNX5P"; // RedBear IoT pHAT breakout board
config.device_name = "/dev/tty.usbserial-A900K0VK"; // CSR8811 breakout board
// init HCI
const btstack_uart_block_t * uart_driver = btstack_uart_block_posix_instance();
const hci_transport_t * transport = hci_transport_h5_instance(uart_driver);
const btstack_link_key_db_t * link_key_db = btstack_link_key_db_fs_instance();
hci_init(transport, (void*) &config);
hci_set_link_key_db(link_key_db);
// enable BCSP mode for CSR chipsets - auto detect might not work
// hci_transport_h5_enable_bcsp_mode();
// set BD_ADDR for CSR without Flash/unique address
// bd_addr_t own_address = { 0x11, 0x22, 0x33, 0x44, 0x55, 0x66};
// btstack_chipset_csr_set_bd_addr(own_address);
// enable auto-sleep mode
// hci_transport_h5_set_auto_sleep(300);
// register for HCI events
hci_event_callback_registration.callback = &packet_handler;
hci_add_event_handler(&hci_event_callback_registration);
// handle CTRL-c
signal(SIGINT, sigint_handler);
// setup app
btstack_main(argc, argv);
// go
btstack_run_loop_execute();
return 0;
}
int main (int argc, const char * argv[]){
// start stack
btstack_run_loop_init(btstack_run_loop_posix_get_instance());
int err = bt_open();
if (err) {
printf("Failed to open connection to BTdaemon\n");
return err;
}
// init table
int i; for (i=0;i<MAX_DEVICES;i++) devices[i].state = 0;
bt_register_packet_handler(packet_handler);
bt_send_cmd(&btstack_set_power_mode, HCI_POWER_ON );
btstack_run_loop_execute();
bt_close();
return 0;
}
int main (int argc, const char * argv[]) {
printf("le_scan started\n");
printf("- connecting to BTstack Daemon\n");
// start stack
btstack_run_loop_init(btstack_run_loop_posix_get_instance());
int err = bt_open();
if (err) {
printf("-> Failed to open connection to BTstack Daemon\n");
return err;
}
printf("- connected\n");
printf("- send power on\n");
bt_register_packet_handler(packet_handler);
bt_send_cmd(&btstack_set_power_mode, HCI_POWER_ON );
btstack_run_loop_execute();
bt_close();
return 0;
}
int main(int argc, const char * argv[]){
/// GET STARTED with BTstack ///
btstack_memory_init();
btstack_run_loop_init(btstack_run_loop_posix_get_instance());
// use logger: format HCI_DUMP_PACKETLOGGER, HCI_DUMP_BLUEZ or HCI_DUMP_STDOUT
hci_dump_open("/tmp/hci_dump.pklg", HCI_DUMP_PACKETLOGGER);
// pick serial port
config.device_name = "/dev/tty.usbserial-A900K0VK";
// init HCI
const btstack_uart_block_t * uart_driver = btstack_uart_block_posix_instance();
const hci_transport_t * transport = hci_transport_h4_instance(uart_driver);
const btstack_link_key_db_t * link_key_db = btstack_link_key_db_fs_instance();
hci_init(transport, (void*) &config);
hci_set_link_key_db(link_key_db);
// inform about BTstack state
hci_event_callback_registration.callback = &packet_handler;
hci_add_event_handler(&hci_event_callback_registration);
// setup dynamic chipset driver setup
hci_set_local_version_information_callback(&local_version_information_callback);
// handle CTRL-c
signal(SIGINT, sigint_handler);
// setup app
btstack_main(argc, argv);
// go
btstack_run_loop_execute();
return 0;
}
