static inline int elf_loadfile(FAR struct elf_loadinfo_s *loadinfo)
{
FAR uint8_t *dest;
int ret;
int i;
/* Allocate (and zero) memory for the ELF file. */
loadinfo->elfalloc = (uintptr_t)kzalloc(loadinfo->elfsize);
if (!loadinfo->elfalloc)
{
return -ENOMEM;
}
/* Read each section into memory that is marked SHF_ALLOC + SHT_NOBITS */
bvdbg("Loaded sections:\n");
dest = (FAR uint8_t*)loadinfo->elfalloc;
for (i = 0; i < loadinfo->ehdr.e_shnum; i++)
{
FAR Elf32_Shdr *shdr = &loadinfo->shdr[i];
/* SHF_ALLOC indicates that the section requires memory during
* execution */
if ((shdr->sh_flags & SHF_ALLOC) == 0)
{
continue;
}
/* SHT_NOBITS indicates that there is no data in the file for the
* section.
*/
if (shdr->sh_type != SHT_NOBITS)
{
/* Read the section data from sh_offset to dest */
ret = elf_read(loadinfo, dest, shdr->sh_size, shdr->sh_offset);
if (ret < 0)
{
bdbg("Failed to read section %d: %d\n", i, ret);
return ret;
}
}
/* Update sh_addr to point to copy in memory */
bvdbg("%d. %08x->%08x\n", i, (long)shdr->sh_addr, (long)dest);
shdr->sh_addr = (uintptr_t)dest;
/* Setup the memory pointer for the next time through the loop */
dest += ELF_ALIGNUP(shdr->sh_size);
}
return OK;
}
int unload_module(FAR struct binary_s *binp)
{
int ret;
int i;
if (binp)
{
/* Perform any format-specific unload operations */
if (binp->unload)
{
ret = binp->unload(binp);
if (ret < 0)
{
bdbg("binp->unload() failed: %d\n", ret);
set_errno(-ret);
return ERROR;
}
}
#ifdef CONFIG_BINFMT_CONSTRUCTORS
/* Execute C++ destructors */
ret = exec_dtors(binp);
if (ret < 0)
{
bdbg("exec_ctors() failed: %d\n", ret);
set_errno(-ret);
return ERROR;
}
#endif
/* Unmap mapped address spaces */
if (binp->mapped)
{
bvdbg("Unmapping address space: %p\n", binp->mapped);
munmap(binp->mapped, binp->mapsize);
}
/* Free allocated address spaces */
for (i = 0; i < BINFMT_NALLOC; i++)
{
if (binp->alloc[i])
{
bvdbg("Freeing alloc[%d]: %p\n", i, binp->alloc[i]);
kumm_free((FAR void *)binp->alloc[i]);
}
}
/* Notice that the address environment is not destroyed. This should
* happen automatically when the task exits.
*/
}
return OK;
}
int up_addrenv_destroy(FAR group_addrenv_t *addrenv)
{
bvdbg("addrenv=%p\n", addrenv);
DEBUGASSERT(addrenv);
/* Destroy the .text region */
arm_addrenv_destroy_region(addrenv->text, ARCH_TEXT_NSECTS,
CONFIG_ARCH_TEXT_VBASE);
/* Destroy the .bss/.data region */
arm_addrenv_destroy_region(addrenv->data, ARCH_DATA_NSECTS,
CONFIG_ARCH_DATA_VBASE);
#ifdef CONFIG_BUILD_KERNEL
/* Destroy the heap region */
arm_addrenv_destroy_region(addrenv->heap, ARCH_HEAP_NSECTS,
CONFIG_ARCH_HEAP_VBASE);
#endif
memset(addrenv, 0, sizeof(group_addrenv_t));
return OK;
}
int up_addrenv_ustackalloc(FAR struct tcb_s *tcb, size_t stacksize)
{
int ret;
bvdbg("tcb=%p stacksize=%lu\n", tcb, (unsigned long)stacksize);
DEBUGASSERT(tcb);
/* Initialize the address environment list to all zeroes */
memset(tcb->xcp.ustack, 0, ARCH_STACK_NSECTS * sizeof(uintptr_t *));
/* Back the allocation up with physical pages and set up the level 2 mapping
* (which of course does nothing until the L2 page table is hooked into
* the L1 page table).
*/
/* Allocate .text space pages */
ret = arm_addrenv_create_region(tcb->xcp.ustack, ARCH_STACK_NSECTS,
CONFIG_ARCH_STACK_VBASE, stacksize,
MMU_L2_UDATAFLAGS);
if (ret < 0)
{
bdbg("ERROR: Failed to create stack region: %d\n", ret);
up_addrenv_ustackfree(tcb);
return ret;
}
return OK;
}
int up_addrenv_detach(FAR struct task_group_s *group, FAR struct tcb_s *tcb)
{
bvdbg("group=%p tcb=%p\n", group, tcb);
/* Nothing needs to be done in this implementation */
return OK;
}
int nxflat_read(struct nxflat_loadinfo_s *loadinfo, char *buffer, int readsize, int offset)
{
ssize_t nbytes; /* Number of bytes read */
off_t rpos; /* Position returned by lseek */
char *bufptr; /* Next buffer location to read into */
int bytesleft; /* Number of bytes of .data left to read */
int bytesread; /* Total number of bytes read */
bvdbg("Read %d bytes from offset %d\n", readsize, offset);
/* Seek to the position in the object file where the initialized
* data is saved.
*/
bytesread = 0;
bufptr = buffer;
bytesleft = readsize;
do
{
rpos = lseek(loadinfo->filfd, offset, SEEK_SET);
if (rpos != offset)
{
int errval = errno;
bdbg("Failed to seek to position %d: %d\n", offset, errval);
return -errval;
}
/* Read the file data at offset into the user buffer */
nbytes = read(loadinfo->filfd, bufptr, bytesleft);
if (nbytes < 0)
{
int errval = errno;
if (errval != EINTR)
{
bdbg("Read from offset %d failed: %d\n", offset, errval);
return -errval;
}
}
else if (nbytes == 0)
{
bdbg("Unexpected end of file\n");
return -ENODATA;
}
else
{
bytesread += nbytes;
bytesleft -= nbytes;
bufptr += nbytes;
offset += nbytes;
}
}
while (bytesread < readsize);
nxflat_dumpreaddata(buffer, readsize);
return OK;
}
static int nxflat_loadbinary(struct binary_s *binp)
{
struct nxflat_loadinfo_s loadinfo; /* Contains globals for libnxflat */
int ret;
bvdbg("Loading file: %s\n", binp->filename);
/* Initialize the xflat library to load the program binary. */
ret = nxflat_init(binp->filename, &loadinfo);
nxflat_dumploadinfo(&loadinfo);
if (ret != 0)
{
bdbg("Failed to initialize for load of NXFLT program: %d\n", ret);
goto errout;
}
/* Load the program binary */
ret = nxflat_load(&loadinfo);
nxflat_dumploadinfo(&loadinfo);
if (ret != 0)
{
bdbg("Failed to load NXFLT program binary: %d\n", ret);
goto errout_with_init;
}
/* Bind the program to the exported symbol table */
ret = nxflat_bind(&loadinfo, binp->exports, binp->nexports);
if (ret != 0)
{
bdbg("Failed to bind symbols program binary: %d\n", ret);
goto errout_with_load;
}
/* Return the load information */
binp->entrypt = (main_t)(loadinfo.ispace + loadinfo.entryoffs);
binp->ispace = (void*)loadinfo.ispace;
binp->dspace = (void*)loadinfo.dspace;
binp->isize = loadinfo.isize;
binp->stacksize = loadinfo.stacksize;
nxflat_dumpbuffer("Entry code", (FAR const uint8_t*)binp->entrypt,
MIN(binp->isize - loadinfo.entryoffs,512));
nxflat_uninit(&loadinfo);
return OK;
errout_with_load:
nxflat_unload(&loadinfo);
errout_with_init:
nxflat_uninit(&loadinfo);
errout:
return ret;
}
int prun(FAR char *exepath, size_t varsize, size_t strsize)
{
FAR struct pexec_s *st;
int errcode;
int ret = OK;
/* Load the POFF file into memory */
st = pload(exepath, varsize, varsize);
if (!st)
{
bdbg("ERROR: Could not load %s\n", exepath);
return -ENOEXEC;
}
bvdbg("Loaded %s\n", exepath);
/* Execute the P-Code program until a stopping condition occurs */
for (;;)
{
/* Execute the instruction; Check for exceptional conditions */
errcode = pexec(st);
if (errcode != eNOERROR)
{
break;
}
}
if (errcode != eEXIT)
{
/* REVISIT: Select a more appropriated return errocode */
bdbg("ERROR: Runtime error 0x%02x -- Execution Stopped\n", errcode);
ret = -ENOEXEC;
}
/* Clean up resources used by the interpreter */
bvdbg("Execution terminated\n");
pexec_release(st);
return ret;
}
int up_addrenv_vustack(FAR const struct tcb_s *tcb, FAR void **vstack)
{
bvdbg("Return=%p\n", (FAR void *)CONFIG_ARCH_STACK_VBASE);
/* Not much to do in this case */
DEBUGASSERT(tcb);
*vstack = (FAR void *)CONFIG_ARCH_STACK_VBASE;
return OK;
}
int up_addrenv_vtext(FAR group_addrenv_t *addrenv, FAR void **vtext)
{
bvdbg("return=%p\n", (FAR void *)CONFIG_ARCH_TEXT_VBASE);
/* Not much to do in this case */
DEBUGASSERT(addrenv && vtext);
*vtext = (FAR void *)CONFIG_ARCH_TEXT_VBASE;
return OK;
}
static int builtin_loadbinary(struct binary_s *binp)
{
FAR const char *filename;
FAR const struct builtin_s *b;
int fd;
int index;
int ret;
bvdbg("Loading file: %s\n", binp->filename);
/* Open the binary file for reading (only) */
fd = open(binp->filename, O_RDONLY);
if (fd < 0)
{
int errval = get_errno();
bdbg("ERROR: Failed to open binary %s: %d\n", binp->filename, errval);
return -errval;
}
/* If this file is a BINFS file system, then we can recover the name of
* the file using the FIOC_FILENAME ioctl() call.
*/
ret = ioctl(fd, FIOC_FILENAME, (unsigned long)((uintptr_t)&filename));
if (ret < 0)
{
int errval = get_errno();
bdbg("ERROR: FIOC_FILENAME ioctl failed: %d\n", errval);
return -errval;
}
/* Other file systems may also support FIOC_FILENAME, so the real proof
* is that we can look up the index to this name in g_builtins[].
*/
index = builtin_isavail(filename);
if (index < 0)
{
int errval = get_errno();
bdbg("ERROR: %s is not a builtin application\n", filename);
return -errval;
}
/* Return the load information. NOTE: that there is no way to configure
* the priority. That is a bug and needs to be fixed.
*/
b = builtin_for_index(index);
binp->entrypt = b->main;
binp->stacksize = b->stacksize;
binp->priority = b->priority;
return OK;
}
int elf_load(FAR struct elf_loadinfo_s *loadinfo)
{
int ret;
bvdbg("loadinfo: %p\n", loadinfo);
DEBUGASSERT(loadinfo && loadinfo->filfd >= 0);
/* Load section headers into memory */
ret = elf_loadshdrs(loadinfo);
if (ret < 0)
{
bdbg("elf_loadshdrs failed: %d\n", ret);
goto errout_with_buffers;
}
/* Determine total size to allocate */
elf_elfsize(loadinfo);
/* Allocate memory and load sections into memory */
ret = elf_loadfile(loadinfo);
if (ret < 0)
{
bdbg("elf_loadfile failed: %d\n", ret);
goto errout_with_buffers;
}
/* Load static constructors and destructors. */
#ifdef CONFIG_BINFMT_CONSTRUCTORS
ret = elf_loadctors(loadinfo);
if (ret < 0)
{
bdbg("elf_loadctors failed: %d\n", ret);
goto errout_with_buffers;
}
ret = elf_loaddtors(loadinfo);
if (ret < 0)
{
bdbg("elf_loaddtors failed: %d\n", ret);
goto errout_with_buffers;
}
#endif
return OK;
/* Error exits */
errout_with_buffers:
elf_unload(loadinfo);
return ret;
}
int up_addrenv_clone(FAR const group_addrenv_t *src,
FAR group_addrenv_t *dest)
{
bvdbg("src=%p dest=%p\n", src, dest);
DEBUGASSERT(src && dest);
/* Just copy the address environment from the source to the destination */
memcpy(dest, src, sizeof(group_addrenv_t));
return OK;
}
int elf_read(FAR struct elf_loadinfo_s *loadinfo, FAR uint8_t *buffer,
size_t readsize, off_t offset)
{
ssize_t nbytes; /* Number of bytes read */
off_t rpos; /* Position returned by lseek */
bvdbg("Read %ld bytes from offset %ld\n", (long)readsize, (long)offset);
/* Loop until all of the requested data has been read. */
while (readsize > 0)
{
/* Seek to the next read position */
rpos = lseek(loadinfo->filfd, offset, SEEK_SET);
if (rpos != offset)
{
int errval = errno;
bdbg("Failed to seek to position %ld: %d\n", (long)offset, errval);
return -errval;
}
/* Read the file data at offset into the user buffer */
nbytes = read(loadinfo->filfd, buffer, readsize);
if (nbytes < 0)
{
int errval = errno;
/* EINTR just means that we received a signal */
if (errval != EINTR)
{
bdbg("Read of .data failed: %d\n", errval);
return -errval;
}
}
else if (nbytes == 0)
{
bdbg("Unexpected end of file\n");
return -ENODATA;
}
else
{
readsize -= nbytes;
buffer += nbytes;
offset += nbytes;
}
}
elf_dumpreaddata(buffer, readsize);
return OK;
}
int up_addrenv_vdata(FAR group_addrenv_t *addrenv, uintptr_t textsize,
FAR void **vdata)
{
bvdbg("return=%p\n",
(FAR void *)(CONFIG_ARCH_DATA_VBASE + ARCH_DATA_RESERVE_SIZE));
/* Not much to do in this case */
DEBUGASSERT(addrenv && vdata);
*vdata = (FAR void *)(CONFIG_ARCH_DATA_VBASE + ARCH_DATA_RESERVE_SIZE);
return OK;
}
int up_addrenv_ustackfree(FAR struct tcb_s *tcb)
{
bvdbg("tcb=%p\n", tcb);
DEBUGASSERT(tcb);
/* Destroy the stack region */
arm_addrenv_destroy_region(tcb->xcp.ustack, ARCH_STACK_NSECTS,
CONFIG_ARCH_STACK_VBASE);
memset(tcb->xcp.ustack, 0, ARCH_STACK_NSECTS * sizeof(uintptr_t *));
return OK;
}
int nxflat_initialize(void)
{
int ret;
/* Register ourselves as a binfmt loader */
bvdbg("Registering NXFLAT\n");
ret = register_binfmt(&g_nxflatbinfmt);
if (ret != 0)
{
bdbg("Failed to register binfmt: %d\n", ret);
}
return ret;
}
int load_module(FAR struct binary_s *bin)
{
FAR struct binfmt_s *binfmt;
int ret = -ENOENT;
#ifdef CONFIG_DEBUG
if (bin && bin->filename)
#endif
{
bdbg("Loading %s\n", bin->filename);
/* Disabling pre-emption should be sufficient protection while
* accessing the list of registered binary format handlers.
*/
sched_lock();
/* Traverse the list of registered binary format handlers. Stop
* when either (1) a handler recognized and loads the format, or
* (2) no handler recognizes the format.
*/
for (binfmt = g_binfmts; binfmt; binfmt = binfmt->next)
{
/* Use this handler to try to load the format */
ret = binfmt->load(bin);
if (ret == OK)
{
/* Successfully loaded -- break out with ret == 0 */
bvdbg("Successfully loaded module %s\n", bin->filename);
dump_module(bin);
break;
}
}
sched_unlock();
}
/* This is an end-user function. Return failures via errno */
if (ret < 0)
{
bdbg("Returning errno %d\n", -ret);
errno = -ret;
return ERROR;
}
return OK;
}
static inline void exec_ctors(FAR const struct binary_s *binp)
{
binfmt_ctor_t *ctor = binp->ctors;
int i;
/* Execute each constructor */
for (i = 0; i < binp->nctors; i++)
{
bvdbg("Calling ctor %d at %p\n", i, (FAR void *)ctor);
(*ctor)();
ctor++;
}
}
int elf_initialize(void)
{
int ret;
/* Register ourselves as a binfmt loader */
bvdbg("Registering ELF\n");
ret = register_binfmt(&g_elfbinfmt);
if (ret != 0)
{
bdbg("Failed to register binfmt: %d\n", ret);
}
return ret;
}
int builtin_initialize(void)
{
int ret;
/* Register ourselves as a binfmt loader */
bvdbg("Registering Builtin Loader\n");
ret = register_binfmt(&g_builtin_binfmt);
if (ret != 0)
{
bdbg("Failed to register binfmt: %d\n", ret);
}
return ret;
}
int up_addrenv_restore(FAR const save_addrenv_t *oldenv)
{
uintptr_t vaddr;
int i;
bvdbg("oldenv=%p\n", oldenv);
DEBUGASSERT(oldenv);
for (vaddr = CONFIG_ARCH_TEXT_VBASE, i = 0;
i < ARCH_TEXT_NSECTS;
vaddr += SECTION_SIZE, i++)
{
/* Restore the L1 page table entry */
mmu_l1_restore(vaddr, oldenv->text[i]);
}
for (vaddr = CONFIG_ARCH_DATA_VBASE, i = 0;
i < ARCH_DATA_NSECTS;
vaddr += SECTION_SIZE, i++)
{
/* Restore the L1 page table entry */
mmu_l1_restore(vaddr, oldenv->data[i]);
}
#ifdef CONFIG_BUILD_KERNEL
for (vaddr = CONFIG_ARCH_HEAP_VBASE, i = 0;
i < ARCH_HEAP_NSECTS;
vaddr += SECTION_SIZE, i++)
{
/* Restore the L1 page table entry */
mmu_l1_restore(vaddr, oldenv->heap[i]);
}
#endif
return OK;
}
static inline int exec_ctors(FAR const struct binary_s *binp)
{
binfmt_ctor_t *ctor = binp->ctors;
#ifdef CONFIG_ADDRENV
hw_addrenv_t oldenv;
int ret;
#endif
int i;
/* Instantiate the address enviroment containing the constructors */
#ifdef CONFIG_ADDRENV
ret = up_addrenv_select(binp->addrenv, &oldenv);
if (ret < 0)
{
bdbg("up_addrenv_select() failed: %d\n", ret);
return ret;
}
#endif
/* Execute each constructor */
for (i = 0; i < binp->nctors; i++)
{
bvdbg("Calling ctor %d at %p\n", i, (FAR void *)ctor);
(*ctor)();
ctor++;
}
/* Restore the address enviroment */
#ifdef CONFIG_ADDRENV
return up_addrenv_restore(oldenv);
#else
return OK;
#endif
}
static inline int exec_dtors(FAR struct binary_s *binp)
{
binfmt_dtor_t *dtor = binp->dtors;
#ifdef CONFIG_ARCH_ADDRENV
save_addrenv_t oldenv;
int ret;
#endif
int i;
/* Instantiate the address environment containing the destructors */
#ifdef CONFIG_ARCH_ADDRENV
ret = up_addrenv_select(&binp->addrenv, &oldenv);
if (ret < 0)
{
bdbg("ERROR: up_addrenv_select() failed: %d\n", ret);
return ret;
}
#endif
/* Execute each destructor */
for (i = 0; i < binp->ndtors; i++)
{
bvdbg("Calling dtor %d at %p\n", i, (FAR void *)dtor);
(*dtor)();
dtor++;
}
/* Restore the address environment */
#ifdef CONFIG_ARCH_ADDRENV
return up_addrenv_restore(&oldenv);
#else
return OK;
#endif
}
static int load_absmodule(FAR struct binary_s *bin)
{
FAR struct binfmt_s *binfmt;
int ret = -ENOENT;
bdbg("Loading %s\n", bin->filename);
/* Disabling pre-emption should be sufficient protection while accessing
* the list of registered binary format handlers.
*/
sched_lock();
/* Traverse the list of registered binary format handlers. Stop
* when either (1) a handler recognized and loads the format, or
* (2) no handler recognizes the format.
*/
for (binfmt = g_binfmts; binfmt; binfmt = binfmt->next)
{
/* Use this handler to try to load the format */
ret = binfmt->load(bin);
if (ret == OK)
{
/* Successfully loaded -- break out with ret == 0 */
bvdbg("Successfully loaded module %s\n", bin->filename);
dump_module(bin);
break;
}
}
sched_unlock();
return ret;
}
static int elf_loadbinary(struct binary_s *binp)
{
struct elf_loadinfo_s loadinfo; /* Contains globals for libelf */
int ret;
bvdbg("Loading file: %s\n", binp->filename);
/* Initialize the xflat library to load the program binary. */
ret = elf_init(binp->filename, &loadinfo);
elf_dumploadinfo(&loadinfo);
if (ret != 0)
{
bdbg("Failed to initialize for load of ELF program: %d\n", ret);
goto errout;
}
/* Load the program binary */
ret = elf_load(&loadinfo);
elf_dumploadinfo(&loadinfo);
if (ret != 0)
{
bdbg("Failed to load ELF program binary: %d\n", ret);
goto errout_with_init;
}
/* Bind the program to the exported symbol table */
ret = elf_bind(&loadinfo, binp->exports, binp->nexports);
if (ret != 0)
{
bdbg("Failed to bind symbols program binary: %d\n", ret);
goto errout_with_load;
}
/* Return the load information */
binp->entrypt = (main_t)(loadinfo.elfalloc + loadinfo.ehdr.e_entry);
binp->alloc[0] = (FAR void *)loadinfo.elfalloc;
binp->stacksize = CONFIG_ELF_STACKSIZE;
#ifdef CONFIG_BINFMT_CONSTRUCTORS
/* Save information about constructors. NOTE: desctructors are not
* yet supported.
*/
binp->alloc[1] = loadinfo.ctoralloc;
binp->ctors = loadinfo.ctors;
binp->nctors = loadinfo.nctors;
binp->alloc[2] = loadinfo.dtoralloc;
binp->dtors = loadinfo.dtors;
binp->ndtors = loadinfo.ndtors;
#endif
elf_dumpbuffer("Entry code", (FAR const uint8_t*)binp->entrypt,
MIN(loadinfo.allocsize - loadinfo.ehdr.e_entry, 512));
elf_uninit(&loadinfo);
return OK;
errout_with_load:
elf_unload(&loadinfo);
errout_with_init:
elf_uninit(&loadinfo);
errout:
return ret;
}
int nxflat_init(const char *filename, struct nxflat_loadinfo_s *loadinfo)
{
uint32_t datastart;
uint32_t dataend;
uint32_t bssstart;
uint32_t bssend;
int ret;
bvdbg("filename: %s loadinfo: %p\n", filename, loadinfo);
/* Clear the load info structure */
memset(loadinfo, 0, sizeof(struct nxflat_loadinfo_s));
/* Open the binary file */
loadinfo->filfd = open(filename, O_RDONLY);
if (loadinfo->filfd < 0)
{
bdbg("Failed to open NXFLAT binary %s: %d\n", filename, ret);
return -errno;
}
/* Read the NXFLAT header from offset 0 */
ret = nxflat_read(loadinfo, (char*)&loadinfo->header,
sizeof(struct nxflat_hdr_s), 0);
if (ret < 0)
{
bdbg("Failed to read NXFLAT header: %d\n", ret);
return ret;
}
nxflat_dumpbuffer("NXFLAT header", (FAR const uint8_t*)&loadinfo->header,
sizeof(struct nxflat_hdr_s));
/* Verify the NXFLAT header */
if (nxflat_verifyheader(&loadinfo->header) != 0)
{
/* This is not an error because we will be called to attempt loading
* EVERY binary. Returning -ENOEXEC simply informs the system that
* the file is not an NXFLAT file. Besides, if there is something worth
* complaining about, nnxflat_verifyheader() has already
* done so.
*/
bdbg("Bad NXFLAT header\n");
return -ENOEXEC;
}
/* Save all of the input values in the loadinfo structure
* and extract some additional information from the xflat
* header. Note that the information in the xflat header is in
* network order.
*/
datastart = ntohl(loadinfo->header.h_datastart);
dataend = ntohl(loadinfo->header.h_dataend);
bssstart = dataend;
bssend = ntohl(loadinfo->header.h_bssend);
/* And put this information into the loadinfo structure as well.
*
* Note that:
*
* isize = the address range from 0 up to datastart.
* datasize = the address range from datastart up to dataend
* bsssize = the address range from dataend up to bssend.
*/
loadinfo->entryoffs = ntohl(loadinfo->header.h_entry);
loadinfo->isize = datastart;
loadinfo->datasize = dataend - datastart;
loadinfo->bsssize = bssend - dataend;
loadinfo->stacksize = ntohl(loadinfo->header.h_stacksize);
/* This is the initial dspace size. We'll re-calculate this later
* after the memory has been allocated.
*/
loadinfo->dsize = bssend - datastart;
/* Get the offset to the start of the relocations (we'll relocate
* this later).
*/
loadinfo->relocstart = ntohl(loadinfo->header.h_relocstart);
loadinfo->reloccount = ntohs(loadinfo->header.h_reloccount);
return 0;
}
int elf_load(FAR struct elf_loadinfo_s *loadinfo)
{
int ret;
bvdbg("loadinfo: %p\n", loadinfo);
DEBUGASSERT(loadinfo && loadinfo->filfd >= 0);
/* Load section headers into memory */
ret = elf_loadshdrs(loadinfo);
if (ret < 0)
{
bdbg("ERROR: elf_loadshdrs failed: %d\n", ret);
goto errout_with_buffers;
}
/* Determine total size to allocate */
elf_elfsize(loadinfo);
/* Allocate (and zero) memory for the ELF file. */
ret = elf_addrenv_alloc(loadinfo, loadinfo->textsize, loadinfo->datasize);
if (ret < 0)
{
bdbg("ERROR: elf_addrenv_alloc() failed: %d\n", ret);
goto errout_with_buffers;
}
#ifdef CONFIG_ARCH_ADDRENV
/* If CONFIG_ARCH_ADDRENV=y, then the loaded ELF lies in a virtual address
* space that may not be in place now. elf_addrenv_select() will
* temporarily instantiate that address space.
*/
ret = elf_addrenv_select(loadinfo);
if (ret < 0)
{
bdbg("ERROR: elf_addrenv_select() failed: %d\n", ret);
goto errout_with_buffers;
}
#endif
/* Load ELF section data into memory */
ret = elf_loadfile(loadinfo);
if (ret < 0)
{
bdbg("ERROR: elf_loadfile failed: %d\n", ret);
goto errout_with_addrenv;
}
/* Load static constructors and destructors. */
#ifdef CONFIG_BINFMT_CONSTRUCTORS
ret = elf_loadctors(loadinfo);
if (ret < 0)
{
bdbg("ERROR: elf_loadctors failed: %d\n", ret);
goto errout_with_addrenv;
}
ret = elf_loaddtors(loadinfo);
if (ret < 0)
{
bdbg("ERROR: elf_loaddtors failed: %d\n", ret);
goto errout_with_addrenv;
}
#endif
#ifdef CONFIG_ARCH_ADDRENV
/* Restore the original address environment */
ret = elf_addrenv_restore(loadinfo);
if (ret < 0)
{
bdbg("ERROR: elf_addrenv_restore() failed: %d\n", ret);
goto errout_with_buffers;
}
#endif
return OK;
/* Error exits */
errout_with_addrenv:
#ifdef CONFIG_ARCH_ADDRENV
(void)elf_addrenv_restore(loadinfo);
#endif
errout_with_buffers:
elf_unload(loadinfo);
return ret;
}
int up_addrenv_create(size_t textsize, size_t datasize, size_t heapsize,
FAR group_addrenv_t *addrenv)
{
int ret;
bvdbg("addrenv=%p textsize=%lu datasize=%lu\n",
addrenv, (unsigned long)textsize, (unsigned long)datasize);
DEBUGASSERT(addrenv);
/* Initialize the address environment structure to all zeroes */
memset(addrenv, 0, sizeof(group_addrenv_t));
/* Back the allocation up with physical pages and set up the level 2 mapping
* (which of course does nothing until the L2 page table is hooked into
* the L1 page table).
*/
/* Allocate .text space pages */
ret = arm_addrenv_create_region(addrenv->text, ARCH_TEXT_NSECTS,
CONFIG_ARCH_TEXT_VBASE, textsize,
MMU_L2_UTEXTFLAGS);
if (ret < 0)
{
bdbg("ERROR: Failed to create .text region: %d\n", ret);
goto errout;
}
/* Allocate .bss/.data space pages. NOTE that a configurable offset is
* added to the allocted size. This is matched by the offset that is
* used when reporting the virtual data address in up_addrenv_vdata().
*/
ret = arm_addrenv_create_region(addrenv->data, ARCH_DATA_NSECTS,
CONFIG_ARCH_DATA_VBASE,
datasize + ARCH_DATA_RESERVE_SIZE,
MMU_L2_UDATAFLAGS);
if (ret < 0)
{
bdbg("ERROR: Failed to create .bss/.data region: %d\n", ret);
goto errout;
}
#ifdef CONFIG_BUILD_KERNEL
/* Initialize the shared data are at the beginning of the .bss/.data
* region.
*/
ret = up_addrenv_initdata((uintptr_t)addrenv->data[0] & PMD_PTE_PADDR_MASK);
if (ret < 0)
{
bdbg("ERROR: Failed to initialize .bss/.data region: %d\n", ret);
goto errout;
}
#endif
#ifdef CONFIG_BUILD_KERNEL
/* Allocate heap space pages */
ret = arm_addrenv_create_region(addrenv->heap, ARCH_HEAP_NSECTS,
CONFIG_ARCH_HEAP_VBASE, heapsize,
MMU_L2_UDATAFLAGS);
if (ret < 0)
{
bdbg("ERROR: Failed to create heap region: %d\n", ret);
goto errout;
}
/* Save the initial heap size allocated. This will be needed when
* the heap data structures are initialized.
*/
addrenv->heapsize = (size_t)ret << MM_PGSHIFT;
#endif
return OK;
errout:
up_addrenv_destroy(addrenv);
return ret;
}
static inline int elf_loadfile(FAR struct elf_loadinfo_s *loadinfo)
{
FAR uint8_t *dest;
int ret;
int i;
/* Allocate (and zero) memory for the ELF file. */
ret = elf_addrenv_alloc(loadinfo, loadinfo->elfsize);
if (ret < 0)
{
bdbg("ERROR: elf_addrenv_alloc() failed: %d\n", ret);
return ret;
}
/* Read each section into memory that is marked SHF_ALLOC + SHT_NOBITS */
bvdbg("Loaded sections:\n");
dest = (FAR uint8_t*)loadinfo->elfalloc;
for (i = 0; i < loadinfo->ehdr.e_shnum; i++)
{
FAR Elf32_Shdr *shdr = &loadinfo->shdr[i];
/* SHF_ALLOC indicates that the section requires memory during
* execution */
if ((shdr->sh_flags & SHF_ALLOC) == 0)
{
continue;
}
/* SHT_NOBITS indicates that there is no data in the file for the
* section.
*/
if (shdr->sh_type != SHT_NOBITS)
{
/* If CONFIG_ADDRENV=y, then 'dest' lies in a virtual address space
* that may not be in place now. elf_addrenv_select() will
* temporarily instantiate that address space.
*/
#ifdef CONFIG_ADDRENV
ret = elf_addrenv_select(loadinfo);
if (ret < 0)
{
bdbg("ERROR: elf_addrenv_select() failed: %d\n", ret);
return ret;
}
#endif
/* Read the section data from sh_offset to dest */
ret = elf_read(loadinfo, dest, shdr->sh_size, shdr->sh_offset);
if (ret < 0)
{
bdbg("Failed to read section %d: %d\n", i, ret);
return ret;
}
/* Restore the original address environment */
#ifdef CONFIG_ADDRENV
ret = elf_addrenv_restore(loadinfo);
if (ret < 0)
{
bdbg("ERROR: elf_addrenv_restore() failed: %d\n", ret);
return ret;
}
#endif
}
/* Update sh_addr to point to copy in memory */
bvdbg("%d. %08x->%08x\n", i, (long)shdr->sh_addr, (long)dest);
shdr->sh_addr = (uintptr_t)dest;
/* Setup the memory pointer for the next time through the loop */
dest += ELF_ALIGNUP(shdr->sh_size);
}
return OK;
}
