/*!
* @brief main function
*/
int main(void)
{
#if FSL_FEATURE_ADC16_HAS_CALIBRATION
adc16_calibration_param_t tempSnseCalibraitionParam;
#endif
hardware_init();
GPIO_DRV_Init(NULL, ledPins);
// Configure the power mode protection
SMC_HAL_SetProtection(SMC_BASE_PTR, kAllowPowerModeVlp);
ADC16_DRV_StructInitUserConfigDefault(&tempSnseAdcConfig);
#if (FSL_FEATURE_ADC16_MAX_RESOLUTION >= 16)
tempSnseAdcConfig.resolution = kAdc16ResolutionBitOf16;
#endif
#if BOARD_ADC_USE_ALT_VREF
tempSnseAdcConfig.refVoltSrc = kAdc16RefVoltSrcOfValt;
#endif
// Init ADC
ADC16_DRV_Init(ADC_INSTANCE, &tempSnseAdcConfig);
// Calibrate VDD and ADCR_TEMP25
#if FSL_FEATURE_ADC16_HAS_CALIBRATION
// Auto calibraion
ADC16_DRV_GetAutoCalibrationParam(ADC_INSTANCE, &tempSnseCalibraitionParam);
ADC16_DRV_SetCalibrationParam(ADC_INSTANCE, &tempSnseCalibraitionParam);
#endif // FSL_FEATURE_ADC16_HAS_CALIBRATION
calibrateParams();
// get cpu uid low value for slave
gSlaveId = SIM_UIDL_UID(SIM_BASE_PTR);
PRINTF("i2c_rtos_slave_bm demo\r\n");
// task list initialize
OSA_Init();
// create task(in BM: only the first registered task can be executed)
OSA_TaskCreate(task_slave,
(uint8_t *)"slave",
512,
task_slave_stack,
0,
(void *)0,
false,
&task_slave_task_handler);
OSA_Start();
return 0;
}
/*lint -save -e970 Disable MISRA rule (6.3) checking. */
int main(void)
/*lint -restore Enable MISRA rule (6.3) checking. */
{
/* Write your local variable definition here */
uint32_t currentCounter = 0;
/*** Processor Expert internal initialization. DON'T REMOVE THIS CODE!!! ***/
PE_low_level_init();
/*** End of Processor Expert internal initialization. ***/
hw_average_config.hwAverageCountMode = kAdc16HwAverageCountOf32; //enable hardware average.
ADC16_DRV_ConfigHwAverage(FSL_ADCONV1,&hw_average_config);
ADC16_DRV_GetAutoCalibrationParam(FSL_ADCONV1,&calibration_param);
calibrateParams();
//ADC16_DRV_Init(FSL_ADCONV1, &adConv1_InitConfig0);
LPTMR_DRV_SetTimerPeriodUs(FSL_LPTMR1,1000000); // Set lptmr period
printf("\r\nLPTMR is running!!\r\n");
LPTMR_DRV_Start(FSL_LPTMR1);
/* Write your code here */
/* For example: for(;;) { } */
while(1)
{
if(currentCounter != lptmrCounter)
{
currentCounter = lptmrCounter;
printf("\r\nLPTMR interrupt No.%d \r\n",currentCounter);
GPIO_DRV_TogglePinOutput(LEDRGB_GREEN);
}
}
/*** Don't write any code pass this line, or it will be deleted during code generation. ***/
/*** RTOS startup code. Macro PEX_RTOS_START is defined by the RTOS component. DON'T MODIFY THIS CODE!!! ***/
#ifdef PEX_RTOS_START
PEX_RTOS_START(); /* Startup of the selected RTOS. Macro is defined by the RTOS component. */
#endif
/*** End of RTOS startup code. ***/
/*** Processor Expert end of main routine. DON'T MODIFY THIS CODE!!! ***/
for(;;){}
/*** Processor Expert end of main routine. DON'T WRITE CODE BELOW!!! ***/
} /*** End of main routine. DO NOT MODIFY THIS TEXT!!! ***/
