/*---------------------------------------------------------------------------*/
PROCESS_THREAD(unicast_sender_process, ev, data)
{
static struct etimer periodic_timer;
static struct etimer send_timer;
uip_ipaddr_t global_ipaddr;
PROCESS_BEGIN();
random_rand();
rpl_log_start();
if(node_id ==0) {
NETSTACK_RDC.off(0);
uint16_t mymac = linkaddr_node_addr.u8[7] << 8 | linkaddr_node_addr.u8[6];
printf("Node id unset, my mac is 0x%04x\n", mymac);
PROCESS_EXIT();
}
cc2420_set_txpower(RF_POWER);
cc2420_set_cca_threshold(RSSI_THR);
printf("App: %u starting\n", node_id);
deployment_init(&global_ipaddr);
//rpl_setup(node_id == ROOT_ID, node_id);
simple_udp_register(&unicast_connection, UDP_PORT,
NULL, UDP_PORT, receiver);
if(node_id == ROOT_ID) {
uip_ipaddr_t my_ipaddr;
set_ipaddr_from_id(&my_ipaddr, node_id);
//NETSTACK_RDC.off(1);
}
else {
etimer_set(&periodic_timer,1 * 30 * CLOCK_SECOND);
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&periodic_timer));
etimer_set(&periodic_timer, SEND_INTERVAL);
while(1) {
etimer_set(&send_timer, random_rand() % (SEND_INTERVAL));
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&send_timer));
int rank = default_instance != NULL ? default_instance->current_dag->rank : 0xffff;
if(rank != 0xffff){
app_send_to(ROOT_ID);
}
else{
printf("App: not in DODAG\n");
}
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&periodic_timer));
etimer_reset(&periodic_timer);
}
}
PROCESS_END();
}
/*---------------------------------------------------------------------------*/
PROCESS_THREAD(unicast_sender_process, ev, data)
{
static struct etimer periodic_timer;
static struct etimer send_timer;
uip_ipaddr_t global_ipaddr;
PROCESS_BEGIN();
if(node_id == 0) {
NETSTACK_RDC.off(0);
printf("Node id unset, my mac is ");
uip_debug_lladdr_print(&rimeaddr_node_addr);
printf("\n");
PROCESS_EXIT();
}
cc2420_set_txpower(RF_POWER);
cc2420_set_cca_threshold(RSSI_THR);
orpl_log_start();
printf("App: %u starting\n", node_id);
deployment_init(&global_ipaddr);
#if WITH_ORPL
orpl_init(node_id == ROOT_ID, 0);
#endif /* WITH_ORPL */
simple_udp_register(&unicast_connection, UDP_PORT,
NULL, UDP_PORT, receiver);
if(node_id == ROOT_ID) {
NETSTACK_RDC.off(1);
etimer_set(&periodic_timer, 2 * 60 * CLOCK_SECOND);
PROCESS_WAIT_EVENT_UNTIL(etimer_expired(&periodic_timer));
etimer_set(&periodic_timer, SEND_INTERVAL);
while(1) {
etimer_set(&send_timer, random_rand() % (SEND_INTERVAL));
PROCESS_WAIT_UNTIL(etimer_expired(&send_timer));
if(check_reachable_count()) {
uip_ipaddr_t dest_ipaddr;
static uint16_t target_id;
static uint16_t i;
do {
target_id = get_node_id_from_index((random_rand()>>8)%get_n_nodes());
set_ipaddr_from_id(&dest_ipaddr, target_id);
} while (target_id == ROOT_ID || !orpl_routing_set_contains(&dest_ipaddr));
app_send_to(target_id);
}
PROCESS_WAIT_UNTIL(etimer_expired(&periodic_timer));
etimer_reset(&periodic_timer);
}
}
/*---------------------------------------------------------------------------*/
int
cc2420_init(void)
{
uint16_t reg;
{
int s = splhigh();
cc2420_arch_init(); /* Initalize ports and SPI. */
CC2420_DISABLE_FIFOP_INT();
CC2420_FIFOP_INT_INIT();
splx(s);
}
/* Turn on voltage regulator and reset. */
SET_VREG_ACTIVE();
clock_delay(250);
SET_RESET_ACTIVE();
clock_delay(127);
SET_RESET_INACTIVE();
clock_delay(125);
/* Turn on the crystal oscillator. */
strobe(CC2420_SXOSCON);
/* Turn on/off automatic packet acknowledgment and address decoding. */
reg = getreg(CC2420_MDMCTRL0);
#if CC2420_CONF_AUTOACK
reg |= AUTOACK | ADR_DECODE;
#else
reg &= ~(AUTOACK | ADR_DECODE);
#endif /* CC2420_CONF_AUTOACK */
setreg(CC2420_MDMCTRL0, reg);
/* Set transmission turnaround time to the lower setting (8 symbols
= 0.128 ms) instead of the default (12 symbols = 0.192 ms). */
/* reg = getreg(CC2420_TXCTRL);
reg &= ~(1 << 13);
setreg(CC2420_TXCTRL, reg);*/
/* Change default values as recomended in the data sheet, */
/* correlation threshold = 20, RX bandpass filter = 1.3uA. */
setreg(CC2420_MDMCTRL1, CORR_THR(20));
reg = getreg(CC2420_RXCTRL1);
reg |= RXBPF_LOCUR;
setreg(CC2420_RXCTRL1, reg);
/* Set the FIFOP threshold to maximum. */
setreg(CC2420_IOCFG0, FIFOP_THR(127));
/* Turn off "Security enable" (page 32). */
reg = getreg(CC2420_SECCTRL0);
reg &= ~RXFIFO_PROTECTION;
setreg(CC2420_SECCTRL0, reg);
cc2420_set_pan_addr(0xffff, 0x0000, NULL);
cc2420_set_channel(CC2420_CONF_CHANNEL);
cc2420_set_cca_threshold(CC2420_CONF_CCA_THRESH);
flushrx();
process_start(&cc2420_process, NULL);
return 1;
}
