/**
* @internal
*
* @brief Tests buffer fill.
* */
static void fill_test() {
/* Test variables. */
CCLPlatforms * ps;
CCLPlatform * p;
CCLContext * ctx = NULL;
CCLDevice * d = NULL;
CCLBuffer * b = NULL;
CCLQueue * q;
cl_char8 h[CCL_TEST_BUFFER_SIZE];
cl_char8 pattern = {{ 1, -1, 5, 4, -12, 3, 7, -20 }};
size_t buf_size = sizeof(cl_char8) * CCL_TEST_BUFFER_SIZE;
CCLErr * err = NULL;
/* Get a context which supports OpenCL 1.2, if possible. */
ps = ccl_platforms_new(&err);
g_assert_no_error(err);
for (guint i = 0; i < ccl_platforms_count(ps); ++i) {
p = ccl_platforms_get(ps, i);
cl_uint ocl_ver = ccl_platform_get_opencl_version(p, &err);
if (ocl_ver >= 120) {
ctx = ccl_context_new_from_devices(
ccl_platform_get_num_devices(p, NULL),
ccl_platform_get_all_devices(p, NULL),
&err);
g_assert_no_error(err);
break;
}
}
/* If not possible to find a 1.2 or better context, finish this
* test. */
if (ctx == NULL) {
g_test_message("'%s' test not performed because no platform " \
"with OpenCL 1.2 support was found", CCL_STRD);
ccl_platforms_destroy(ps);
return;
}
/* Get first device in context. */
d = ccl_context_get_device(ctx, 0, &err);
g_assert_no_error(err);
/* Create a command queue. */
q = ccl_queue_new(ctx, d, 0, &err);
g_assert_no_error(err);
/* Create regular buffer. */
b = ccl_buffer_new(ctx, CL_MEM_READ_WRITE, buf_size, NULL, &err);
g_assert_no_error(err);
/* Fill buffer with pattern. */
ccl_buffer_enqueue_fill(
b, q, &pattern, sizeof(cl_char8), 0, buf_size, NULL, &err);
g_assert_no_error(err);
/* Read data back to host. */
ccl_buffer_enqueue_read(b, q, CL_TRUE, 0, buf_size, h, NULL, &err);
g_assert_no_error(err);
/* Check data is OK. */
for (guint i = 0; i < CCL_TEST_BUFFER_SIZE; ++i)
for (guint j = 0; j < 8; ++j)
g_assert_cmpuint(h[i].s[j], ==, pattern.s[j]);
/* Free stuff. */
ccl_buffer_destroy(b);
ccl_queue_destroy(q);
ccl_context_destroy(ctx);
ccl_platforms_destroy(ps);
/* Confirm that memory allocated by wrappers has been properly
* freed. */
g_assert(ccl_wrapper_memcheck());
}
/**
* @internal
*
* @brief Tests rect buffer operations.
* */
static void rect_read_write_copy_test() {
/* Test variables. */
CCLContext * ctx = NULL;
CCLDevice * d = NULL;
CCLBuffer * b1 = NULL;
CCLBuffer * b2 = NULL;
CCLQueue * cq;
cl_uchar h1[CCL_TEST_BUFFER_SIZE * CCL_TEST_BUFFER_SIZE];
cl_uchar h2[CCL_TEST_BUFFER_SIZE * CCL_TEST_BUFFER_SIZE];
size_t buf_size = sizeof(cl_uchar) * sizeof(cl_uchar)
* CCL_TEST_BUFFER_SIZE * CCL_TEST_BUFFER_SIZE;
CCLErr * err = NULL;
const size_t origin[] = {0, 0, 0};
const size_t region[] = {CCL_TEST_BUFFER_SIZE * sizeof(cl_uchar),
CCL_TEST_BUFFER_SIZE * sizeof(cl_uchar), 1};
/* Create a "2D" host array, put some stuff in it. */
for (cl_uint i = 0; i < CCL_TEST_BUFFER_SIZE; ++i)
for (cl_uint j = 0; j < CCL_TEST_BUFFER_SIZE; ++j)
h1[i * CCL_TEST_BUFFER_SIZE + j] =
(cl_uchar) (g_test_rand_int() % 0xFF);
/* Get the test context with the pre-defined device. */
ctx = ccl_test_context_new(&err);
g_assert_no_error(err);
/* Get first device in context. */
d = ccl_context_get_device(ctx, 0, &err);
g_assert_no_error(err);
/* Create a command queue. */
cq = ccl_queue_new(ctx, d, 0, &err);
g_assert_no_error(err);
/* Create device buffers. */
b1 = ccl_buffer_new(ctx, CL_MEM_READ_WRITE, buf_size, NULL, &err);
g_assert_no_error(err);
b2 = ccl_buffer_new(ctx, CL_MEM_READ_WRITE, buf_size, NULL, &err);
g_assert_no_error(err);
/* Write "rect" data to first buffer in device. */
ccl_buffer_enqueue_write_rect(
b1, cq, CL_TRUE, origin, origin, region, 0, 0, 0, 0, h1, NULL, &err);
g_assert_no_error(err);
/* Copy "rect" data from first buffer to second buffer. */
ccl_buffer_enqueue_copy_rect(
b1, b2, cq, origin, origin, region, 0, 0, 0, 0, NULL, &err);
g_assert_no_error(err);
/* Read data "rect" back to host from the second buffer. */
ccl_buffer_enqueue_read_rect(
b2, cq, CL_TRUE, origin, origin, region, 0, 0, 0, 0, h2, NULL, &err);
g_assert_no_error(err);
/* Check data is OK doing a flat comparison. */
for (cl_uint i = 0; i < CCL_TEST_BUFFER_SIZE * CCL_TEST_BUFFER_SIZE; ++i)
g_assert_cmpuint(h1[i], ==, h2[i]);
/* Free stuff. */
ccl_buffer_destroy(b1);
ccl_buffer_destroy(b2);
ccl_queue_destroy(cq);
ccl_context_destroy(ctx);
/* Confirm that memory allocated by wrappers has been properly
* freed. */
g_assert(ccl_wrapper_memcheck());
}
/**
* @internal
*
* @brief Tests the ccl_buffer_new_from_region() function.
* */
static void create_from_region_test() {
/* Test variables. */
CCLContext * ctx = NULL;
CCLDevice * dev = NULL;
CCLQueue * cq = NULL;
CCLBuffer * buf = NULL;
CCLBuffer * subbuf = NULL;
CCLEvent * evt = NULL;
CCLEventWaitList ewl = NULL;
CCLErr * err = NULL;
cl_ulong * hbuf;
cl_ulong * hsubbuf;
cl_uint min_align;
size_t siz_buf;
size_t siz_subbuf;
/* Get the test context with the pre-defined device. */
ctx = ccl_test_context_new(&err);
g_assert_no_error(err);
/* Get first device in context. */
dev = ccl_context_get_device(ctx, 0, &err);
g_assert_no_error(err);
/* Get minimum alignment for sub-buffer in bits. */
min_align = ccl_device_get_info_scalar(
dev, CL_DEVICE_MEM_BASE_ADDR_ALIGN, cl_uint, &err);
g_assert_no_error(err);
/* Determine buffer and sub-buffer sizes (divide by 64 because its
* the number of bits in cl_ulong). */
siz_subbuf = sizeof(cl_ulong) * min_align / 64;
siz_buf = 4 * siz_subbuf;
/* Allocate memory for host buffer and host sub-buffer. */
hbuf = g_slice_alloc(siz_buf);
hsubbuf = g_slice_alloc(siz_subbuf);
/* Initialize initial host buffer. */
for (cl_uint i = 0; i < siz_buf / sizeof(cl_ulong); ++i)
hbuf[i] = g_test_rand_int();
/* Create a command queue. */
cq = ccl_queue_new(ctx, dev, 0, &err);
g_assert_no_error(err);
/* Create a regular buffer, put some data in it. */
buf = ccl_buffer_new(
ctx, CL_MEM_READ_WRITE | CL_MEM_COPY_HOST_PTR, siz_buf, hbuf, &err);
g_assert_no_error(err);
/* Create sub-buffer from indexes 16 to 31 (16 positions) of
* original buffer. */
subbuf = ccl_buffer_new_from_region(
buf, 0, siz_subbuf, siz_subbuf, &err);
g_assert_no_error(err);
/* Get data in sub-buffer to a new host buffer. */
evt = ccl_buffer_enqueue_read(
subbuf, cq, CL_FALSE, 0, siz_subbuf, hsubbuf, NULL, &err);
g_assert_no_error(err);
/* Wait for read to be complete. */
ccl_event_wait(ccl_ewl(&ewl, evt, NULL), &err);
g_assert_no_error(err);
/* Check that expected values were successfully read. */
for (cl_uint i = 0; i < siz_subbuf / sizeof(cl_ulong); ++i)
g_assert_cmpuint(
hsubbuf[i], ==, hbuf[i + siz_subbuf / sizeof(cl_ulong)]);
/* Destroy stuff. */
ccl_buffer_destroy(buf);
ccl_buffer_destroy(subbuf);
ccl_queue_destroy(cq);
ccl_context_destroy(ctx);
g_slice_free1(siz_buf, hbuf);
g_slice_free1(siz_subbuf, hsubbuf);
/* Confirm that memory allocated by wrappers has been properly
* freed. */
g_assert(ccl_wrapper_memcheck());
}
/**
* @internal
*
* @brief Tests basic read/write operations from/to buffer objects.
* */
static void read_write_test() {
/* Test variables. */
CCLContext * ctx = NULL;
CCLDevice * d = NULL;
CCLBuffer * b = NULL;
CCLQueue * q;
cl_uint h_in[CCL_TEST_BUFFER_SIZE];
cl_uint h_out[CCL_TEST_BUFFER_SIZE];
size_t buf_size = sizeof(cl_uint) * CCL_TEST_BUFFER_SIZE;
CCLErr * err = NULL;
/* Create a host array, put some stuff in it. */
for (guint i = 0; i < CCL_TEST_BUFFER_SIZE; ++i)
h_in[i] = g_test_rand_int();
/* Get the test context with the pre-defined device. */
ctx = ccl_test_context_new(&err);
g_assert_no_error(err);
/* Get first device in context. */
d = ccl_context_get_device(ctx, 0, &err);
g_assert_no_error(err);
/* Create a command queue. */
q = ccl_queue_new(ctx, d, 0, &err);
g_assert_no_error(err);
/* Create regular buffer and write data from the host buffer. */
b = ccl_buffer_new(
ctx, CL_MEM_READ_WRITE | CL_MEM_COPY_HOST_PTR, buf_size, h_in, &err);
g_assert_no_error(err);
/* Read data back to host. */
ccl_buffer_enqueue_read(
b, q, CL_TRUE, 0, buf_size, (void *) h_out, NULL, &err);
g_assert_no_error(err);
/* Check data is OK. */
for (guint i = 0; i < CCL_TEST_BUFFER_SIZE; ++i)
g_assert_cmpuint(h_in[i], ==, h_out[i]);
/* Set some other data in host array. */
for (guint i = 0; i < CCL_TEST_BUFFER_SIZE; ++i)
h_in[i] = g_test_rand_int();
/* Write it explicitly to buffer. */
ccl_buffer_enqueue_write(
b, q, CL_TRUE, 0, buf_size, (void *) h_in, NULL, &err);
g_assert_no_error(err);
/* Read new data to host. */
ccl_buffer_enqueue_read(
b, q, CL_TRUE, 0, buf_size, (void *) h_out, NULL, &err);
g_assert_no_error(err);
/* Check data is OK. */
for (guint i = 0; i < CCL_TEST_BUFFER_SIZE; ++i)
g_assert_cmpuint(h_in[i], ==, h_out[i]);
/* Free stuff. */
ccl_buffer_destroy(b);
ccl_queue_destroy(q);
ccl_context_destroy(ctx);
/* Confirm that memory allocated by wrappers has been properly
* freed. */
g_assert(ccl_wrapper_memcheck());
}
/**
* @internal
*
* @brief Tests copy operations from one buffer to another.
* */
static void copy_test() {
/* Test variables. */
CCLContext * ctx = NULL;
CCLDevice * d = NULL;
CCLBuffer * b1 = NULL;
CCLBuffer * b2 = NULL;
CCLQueue * q;
cl_long h1[CCL_TEST_BUFFER_SIZE];
cl_long h2[CCL_TEST_BUFFER_SIZE];
size_t buf_size = sizeof(cl_long) * CCL_TEST_BUFFER_SIZE;
CCLErr * err = NULL;
/* Create a host array, put some stuff in it. */
for (guint i = 0; i < CCL_TEST_BUFFER_SIZE; ++i)
h1[i] = g_test_rand_int();
/* Get the test context with the pre-defined device. */
ctx = ccl_test_context_new(&err);
g_assert_no_error(err);
/* Get first device in context. */
d = ccl_context_get_device(ctx, 0, &err);
g_assert_no_error(err);
/* Create a command queue. */
q = ccl_queue_new(ctx, d, 0, &err);
g_assert_no_error(err);
/* Create regular buffer and write data from the host buffer. */
b1 = ccl_buffer_new(
ctx, CL_MEM_READ_WRITE | CL_MEM_COPY_HOST_PTR, buf_size, h1, &err);
g_assert_no_error(err);
/* Create another buffer, double the size. */
b2 = ccl_buffer_new(ctx, CL_MEM_READ_WRITE, 2 * buf_size, NULL, &err);
g_assert_no_error(err);
/* Copy data from first buffer to second buffer, using an offset on
* the second buffer. */
ccl_buffer_enqueue_copy(
b1, b2, q, 0, buf_size / 2, buf_size, NULL, &err);
g_assert_no_error(err);
/* Read data back to host from the second buffer. */
ccl_buffer_enqueue_read(
b2, q, CL_TRUE, buf_size / 2, buf_size, h2, NULL, &err);
g_assert_no_error(err);
/* Check data is OK. */
for (guint i = 0; i < CCL_TEST_BUFFER_SIZE; ++i)
g_assert_cmpuint(h1[i], ==, h2[i]);
/* Free stuff. */
ccl_buffer_destroy(b1);
ccl_buffer_destroy(b2);
ccl_queue_destroy(q);
ccl_context_destroy(ctx);
/* Confirm that memory allocated by wrappers has been properly
* freed. */
g_assert(ccl_wrapper_memcheck());
}
/**
* Cellular automata sample main function.
* */
int main(int argc, char* argv[]) {
/* Wrappers for OpenCL objects. */
CCLContext* ctx;
CCLDevice* dev;
CCLImage* img1;
CCLImage* img2;
CCLProgram* prg;
CCLKernel* krnl;
CCLEvent* evt1;
CCLEvent* evt2;
/* Other variables. */
CCLEventWaitList ewl = NULL;
/* Profiler object. */
CCLProf* prof;
/* Output images filename. */
char* filename;
/* Selected device, may be given in command line. */
int dev_idx = -1;
/* Error handling object (must be NULL). */
GError* err = NULL;
/* Does selected device support images? */
cl_bool image_ok;
/* Initial sim state. */
cl_uchar4* input_image;
/* Simulation states. */
cl_uchar4** output_images;
/* RNG seed, may be given in command line. */
unsigned int seed;
/* Image file write status. */
int file_write_status;
/* Image format. */
cl_image_format image_format = { CL_RGBA, CL_UNSIGNED_INT8 };
/* Thread data. */
struct thread_data td;
/* Global and local worksizes. */
size_t gws[2];
size_t lws[2];
/* Threads. */
GThread* comm_thread;
GThread* exec_thread;
/* Check arguments. */
if (argc >= 2) {
/* Check if a device was specified in the command line. */
dev_idx = atoi(argv[1]);
}
if (argc >= 3) {
/* Check if a RNG seed was specified. */
seed = atoi(argv[2]);
} else {
seed = (unsigned int) time(NULL);
}
/* Initialize RNG. */
srand(seed);
/* Create random initial state. */
input_image = (cl_uchar4*)
malloc(CA_WIDTH * CA_HEIGHT * sizeof(cl_uchar4));
for (cl_uint i = 0; i < CA_WIDTH * CA_HEIGHT; ++i) {
cl_uchar state = (rand() & 0x3) ? 0xFF : 0x00;
input_image[i] = (cl_uchar4) {{ state, state, state, 0xFF }};
}
/* Allocate space for simulation results. */
output_images = (cl_uchar4**)
malloc((CA_ITERS + 1) * sizeof(cl_uchar4*));
for (cl_uint i = 0; i < CA_ITERS + 1; ++i)
output_images[i] = (cl_uchar4*)
malloc(CA_WIDTH * CA_HEIGHT * sizeof(cl_uchar4));
/* Create context using device selected from menu. */
ctx = ccl_context_new_from_menu_full(&dev_idx, &err);
HANDLE_ERROR(err);
/* Get first device in context. */
dev = ccl_context_get_device(ctx, 0, &err);
HANDLE_ERROR(err);
/* Ask device if it supports images. */
image_ok = ccl_device_get_info_scalar(
dev, CL_DEVICE_IMAGE_SUPPORT, cl_bool, &err);
HANDLE_ERROR(err);
if (!image_ok)
ERROR_MSG_AND_EXIT("Selected device doesn't support images.");
/* Create command queues. */
queue_exec = ccl_queue_new(ctx, dev, CL_QUEUE_PROFILING_ENABLE, &err);
HANDLE_ERROR(err);
queue_comm = ccl_queue_new(ctx, dev, CL_QUEUE_PROFILING_ENABLE, &err);
HANDLE_ERROR(err);
/* Create 2D image for initial state. */
img1 = ccl_image_new(ctx, CL_MEM_READ_WRITE,
&image_format, NULL, &err,
"image_type", (cl_mem_object_type) CL_MEM_OBJECT_IMAGE2D,
"image_width", (size_t) CA_WIDTH,
"image_height", (size_t) CA_HEIGHT,
NULL);
HANDLE_ERROR(err);
/* Create another 2D image for double buffering. */
img2 = ccl_image_new(ctx, CL_MEM_READ_WRITE,
&image_format, NULL, &err,
"image_type", (cl_mem_object_type) CL_MEM_OBJECT_IMAGE2D,
"image_width", (size_t) CA_WIDTH,
"image_height", (size_t) CA_HEIGHT,
NULL);
HANDLE_ERROR(err);
/* Create program from kernel source and compile it. */
prg = ccl_program_new_from_source(ctx, CA_KERNEL, &err);
HANDLE_ERROR(err);
ccl_program_build(prg, NULL, &err);
HANDLE_ERROR(err);
/* Get kernel wrapper. */
krnl = ccl_program_get_kernel(prg, "ca", &err);
HANDLE_ERROR(err);
/* Determine nice local and global worksizes. */
ccl_kernel_suggest_worksizes(krnl, dev, 2, real_ws, gws, lws, &err);
HANDLE_ERROR(err);
printf("\n * Global work-size: (%d, %d)\n", (int) gws[0], (int) gws[1]);
printf(" * Local work-size: (%d, %d)\n", (int) lws[0], (int) lws[1]);
/* Create thread communication queues. */
comm_thread_queue = g_async_queue_new();
exec_thread_queue = g_async_queue_new();
host_thread_queue = g_async_queue_new();
/* Setup thread data. */
td.krnl = krnl;
td.img1 = img1;
td.img2 = img2;
td.gws = gws;
td.lws = lws;
td.output_images = output_images;
/* Create threads. */
exec_thread = g_thread_new("exec_thread", exec_func, &td);
comm_thread = g_thread_new("comm_thread", comm_func, &td);
/* Start profiling. */
prof = ccl_prof_new();
ccl_prof_start(prof);
/* Write initial state. */
ccl_image_enqueue_write(img1, queue_comm, CL_TRUE,
origin, region, 0, 0, input_image, NULL, &err);
HANDLE_ERROR(err);
/* Run CA_ITERS iterations of the CA. */
for (cl_uint i = 0; i < CA_ITERS; ++i) {
/* Send message to comms thread. */
g_async_queue_push(comm_thread_queue, &go_msg);
/* Send message to exec thread. */
g_async_queue_push(exec_thread_queue, &go_msg);
/* Get event wrappers from both threads. */
evt1 = (CCLEvent*) g_async_queue_pop(host_thread_queue);
evt2 = (CCLEvent*) g_async_queue_pop(host_thread_queue);
/* Can't continue until this iteration is over. */
ccl_event_wait_list_add(&ewl, evt1, evt2, NULL);
/* Wait for events. */
ccl_event_wait(&ewl, &err);
HANDLE_ERROR(err);
}
/* Send message to comms thread to read last result. */
g_async_queue_push(comm_thread_queue, &go_msg);
/* Send stop messages to both threads. */
g_async_queue_push(comm_thread_queue, &stop_msg);
g_async_queue_push(exec_thread_queue, &stop_msg);
/* Get event wrapper from comms thread. */
evt1 = (CCLEvent*) g_async_queue_pop(host_thread_queue);
/* Can't continue until final read is over. */
ccl_event_wait_list_add(&ewl, evt1, NULL);
ccl_event_wait(&ewl, &err);
HANDLE_ERROR(err);
/* Make sure both queues are finished. */
ccl_queue_finish(queue_comm, &err);
HANDLE_ERROR(err);
ccl_queue_finish(queue_exec, &err);
HANDLE_ERROR(err);
/* Stop profiling timer and add queues for analysis. */
ccl_prof_stop(prof);
ccl_prof_add_queue(prof, "Comms", queue_comm);
ccl_prof_add_queue(prof, "Exec", queue_exec);
/* Allocate space for base filename. */
filename = (char*) malloc(
(strlen(IMAGE_FILE_PREFIX ".png") + IMAGE_FILE_NUM_DIGITS + 1) * sizeof(char));
/* Write results to image files. */
for (cl_uint i = 0; i < CA_ITERS; ++i) {
/* Determine next filename. */
sprintf(filename, "%s%0" G_STRINGIFY(IMAGE_FILE_NUM_DIGITS) "d.png", IMAGE_FILE_PREFIX, i);
/* Save next image. */
file_write_status = stbi_write_png(filename, CA_WIDTH, CA_HEIGHT, 4,
output_images[i], CA_WIDTH * sizeof(cl_uchar4));
/* Give feedback if unable to save image. */
if (!file_write_status) {
ERROR_MSG_AND_EXIT("Unable to save image in file.");
}
}
/* Process profiling info. */
ccl_prof_calc(prof, &err);
HANDLE_ERROR(err);
/* Print profiling info. */
ccl_prof_print_summary(prof);
/* Save profiling info. */
ccl_prof_export_info_file(prof, "prof.tsv", &err);
HANDLE_ERROR(err);
/* Destroy threads. */
g_thread_join(exec_thread);
g_thread_join(comm_thread);
/* Destroy thread communication queues. */
g_async_queue_unref(comm_thread_queue);
g_async_queue_unref(exec_thread_queue);
g_async_queue_unref(host_thread_queue);
/* Release host buffers. */
free(filename);
free(input_image);
for (cl_uint i = 0; i < CA_ITERS + 1; ++i)
free(output_images[i]);
free(output_images);
/* Release wrappers. */
ccl_image_destroy(img1);
ccl_image_destroy(img2);
ccl_program_destroy(prg);
ccl_queue_destroy(queue_comm);
ccl_queue_destroy(queue_exec);
ccl_context_destroy(ctx);
/* Destroy profiler. */
ccl_prof_destroy(prof);
/* Check all wrappers have been destroyed. */
g_assert(ccl_wrapper_memcheck());
/* Terminate. */
return 0;
}
/**
* Tests creation, getting info from and destruction of
* profiler objects, and their relationship with context, device and
* queue wrapper objects.
* */
static void create_add_destroy_test() {
/* Test variables. */
CCLErr* err = NULL;
CCLBuffer* buf1 = NULL;
CCLBuffer* buf2 = NULL;
CCLProf* prof = NULL;
CCLContext* ctx = NULL;
CCLDevice* d = NULL;
CCLQueue* cq1 = NULL;
CCLQueue* cq2 = NULL;
CCLEvent* evt = NULL;
CCLEventWaitList ewl = NULL;
size_t buf_size = 8 * sizeof(cl_short);
cl_short hbuf[8] = {1, 2, 3, 4, 5, 6, 7, 8};
cl_ulong duration, eff_duration;
double time_elapsed;
/* Create a new profile object. */
prof = ccl_prof_new();
/* Get a context and a device. */
ctx = ccl_test_context_new(&err);
g_assert_no_error(err);
d = ccl_context_get_device(ctx, 0, &err);
g_assert_no_error(err);
/* Create two command queue wrappers. */
cq1 = ccl_queue_new(ctx, d, CL_QUEUE_PROFILING_ENABLE, &err);
g_assert_no_error(err);
cq2 = ccl_queue_new(ctx, d, CL_QUEUE_PROFILING_ENABLE, &err);
g_assert_no_error(err);
/* Create device buffers. */
buf1 = ccl_buffer_new(ctx, CL_MEM_READ_ONLY, buf_size, NULL, &err);
g_assert_no_error(err);
buf2 = ccl_buffer_new(ctx, CL_MEM_READ_WRITE, buf_size, NULL, &err);
g_assert_no_error(err);
/* Start profile object timer. */
ccl_prof_start(prof);
/* Transfer data to buffer. */
evt = ccl_buffer_enqueue_write(
buf1, cq1, CL_FALSE, 0, buf_size, hbuf, NULL, &err);
g_assert_no_error(err);
/* Transfer data from one buffer to another. */
evt = ccl_buffer_enqueue_copy(buf1, buf2, cq2, 0, 0, buf_size,
ccl_ewl(&ewl, evt, NULL), &err);
g_assert_no_error(err);
/* Wait for copy. */
ccl_event_wait(ccl_ewl(&ewl, evt, NULL), &err);
g_assert_no_error(err);
/* Stop profile object timer. */
ccl_prof_stop(prof);
/* Add both queues to profile object. */
ccl_prof_add_queue(prof, "A Queue", cq1);
ccl_prof_add_queue(prof, "Another Queue", cq2);
/* Process queues. */
ccl_prof_calc(prof, &err);
g_assert_no_error(err);
/* Request some profiling information. */
time_elapsed = ccl_prof_time_elapsed(prof);
duration = ccl_prof_get_duration(prof);
eff_duration = ccl_prof_get_eff_duration(prof);
g_debug("Profiling time elapsed: %lf", time_elapsed);
g_debug("Profiling duration: %d", (cl_int) duration);
g_debug("Profiling eff. duration: %d", (cl_int) eff_duration);
/* Destroy buffers. */
ccl_buffer_destroy(buf1);
ccl_buffer_destroy(buf2);
/* Unref cq1, which should not be destroyed because it is held
* by the profile object. */
ccl_queue_destroy(cq1);
/* Destroy the profile object, which will also destroy cq1. cq2
* will me merely unrefed and must still be explicitly destroyed. */
ccl_prof_destroy(prof);
/* Destroy cq2. */
ccl_queue_destroy(cq2);
/* Destroy the context. */
ccl_context_destroy(ctx);
/* Confirm that memory allocated by wrappers has been properly
* freed. */
g_assert(ccl_wrapper_memcheck());
}
/**
* Tests creation (using "simple" constructor), getting info from and
* destruction of sampler wrapper objects.
* */
static void create_info_destroy_test() {
/* Test variables. */
CCLContext* ctx = NULL;
CCLSampler* s = NULL;
cl_sampler sampler = NULL;
GError* err = NULL;
cl_int ocl_status;
const cl_sampler_properties sampler_properties[] = {
CL_SAMPLER_NORMALIZED_COORDS, CL_TRUE,
CL_SAMPLER_ADDRESSING_MODE, CL_ADDRESS_NONE,
CL_SAMPLER_FILTER_MODE, CL_FILTER_NEAREST,
0};
/* Get the test context with the pre-defined device. */
ctx = ccl_test_context_new(&err);
g_assert_no_error(err);
/* Test three ways to create a sampler. */
for (cl_uint i = 0; i < 3; ++i) {
/* Create sampler wrapper. */
switch (i) {
case 0:
/* Create sampler using "simple" constructor. */
s = ccl_sampler_new(ctx, CL_TRUE, CL_ADDRESS_NONE,
CL_FILTER_NEAREST, &err);
g_assert_no_error(err);
break;
case 1:
/* Using the "full" constructor. */
s = ccl_sampler_new_full(ctx, sampler_properties, &err);
g_assert_no_error(err);
break;
case 2:
/* Using the "wrap" constructor. */
CCL_BEGIN_IGNORE_DEPRECATIONS
sampler = clCreateSampler(ccl_context_unwrap(ctx),
CL_TRUE, CL_ADDRESS_NONE, CL_FILTER_NEAREST,
&ocl_status);
g_assert_cmpint(ocl_status, ==, CL_SUCCESS);
CCL_END_IGNORE_DEPRECATIONS
s = ccl_sampler_new_wrap(sampler);
g_assert_cmphex(GPOINTER_TO_UINT(sampler), ==,
GPOINTER_TO_UINT(ccl_sampler_unwrap(s)));
break;
}
/* Get some info and check if the return value is as expected. */
cl_addressing_mode am;
am = ccl_sampler_get_info_scalar(
s, CL_SAMPLER_ADDRESSING_MODE, cl_addressing_mode, &err);
g_assert_no_error(err);
g_assert_cmpuint(am, ==, CL_ADDRESS_NONE);
cl_filter_mode fm;
fm = ccl_sampler_get_info_scalar(
s, CL_SAMPLER_FILTER_MODE, cl_filter_mode, &err);
g_assert_no_error(err);
g_assert_cmpuint(fm, ==, CL_FILTER_NEAREST);
cl_bool nc;
nc = ccl_sampler_get_info_scalar(
s, CL_SAMPLER_NORMALIZED_COORDS, cl_bool, &err);
g_assert_no_error(err);
g_assert_cmpuint(nc, ==, CL_TRUE);
cl_context context;
context = ccl_sampler_get_info_scalar(
s, CL_SAMPLER_CONTEXT, cl_context, &err);
g_assert_no_error(err);
g_assert_cmphex(GPOINTER_TO_UINT(context), ==,
GPOINTER_TO_UINT(ccl_context_unwrap(ctx)));
/* Destroy sampler. */
ccl_sampler_destroy(s);
}
/* Destroy context. */
ccl_context_destroy(ctx);
/* Confirm that memory allocated by wrappers has been properly
* freed. */
g_assert(ccl_wrapper_memcheck());
}
/**
* Kernel info main function.
*
* @param[in] argc Number of command line arguments.
* @param[in] argv Command line arguments.
* @return ::CCL_SUCCESS if program returns with no error, or another
* ::CCLErrorCode value otherwise.
* */
int main(int argc, char *argv[]) {
/* ***************** */
/* Program variables */
/* ***************** */
/* Function and program return status. */
int status;
/* Error management. */
GError *err = NULL;
/* Context wrapper. */
CCLContext* ctx = NULL;
/* Program wrapper. */
CCLProgram* prg = NULL;
/* Kernel wrapper. */
CCLKernel* krnl = NULL;
/* Device wrapper. */
CCLDevice* dev = NULL;
/* Device filters. */
CCLDevSelFilters filters = NULL;
/* Default device index. */
cl_int dev_idx = -1;
/* OpenCL version. */
double ocl_ver;
/* Kernel workgroup info variables. */
size_t k_wg_size;
size_t k_pref_wg_size_mult;
size_t* k_compile_wg_size;
cl_ulong k_loc_mem_size;
cl_ulong k_priv_mem_size;
/* ************************** */
/* Parse command line options */
/* ************************** */
/* If version was requested, output version and exit. */
if ((argc == 2) && (g_strcmp0("--version", argv[1]) == 0)) {
ccl_common_version_print("ccl_kerninfo");
exit(0);
}
ccl_if_err_create_goto(err, CCL_ERROR, (argc < 3) || (argc > 4),
CCL_ERROR_ARGS, error_handler,
"Usage: %s <program_file> <kernel_name> [device_index]\n",
argv[0]);
if (argc == 4) dev_idx = atoi(argv[3]);
/* ********************************************* */
/* Initialize OpenCL variables and build program */
/* ********************************************* */
/* Select a context/device. */
ccl_devsel_add_dep_filter(
&filters, ccl_devsel_dep_menu,
(dev_idx == -1) ? NULL : (void*) &dev_idx);
ctx = ccl_context_new_from_filters(&filters, &err);
ccl_if_err_goto(err, error_handler);
/* Get program which contains kernel. */
prg = ccl_program_new_from_source_file(ctx, argv[1], &err);
ccl_if_err_goto(err, error_handler);
/* Build program. */
ccl_program_build(prg, NULL, &err);
ccl_if_err_goto(err, error_handler);
/* Get kernel */
krnl = ccl_program_get_kernel(prg, argv[2], &err);
ccl_if_err_goto(err, error_handler);
/* Get the device. */
dev = ccl_context_get_device(ctx, 0, &err);
ccl_if_err_goto(err, error_handler);
/* Check platform OpenCL version. */
ocl_ver = ccl_kernel_get_opencl_version(krnl, &err);
ccl_if_err_goto(err, error_handler);
/* *************************** */
/* Get and print kernel info */
/* *************************** */
g_printf("\n ======================== Static Kernel Information =======================\n\n");
k_wg_size = ccl_kernel_get_workgroup_info_scalar(
krnl, dev, CL_KERNEL_WORK_GROUP_SIZE, size_t, &err);
ccl_if_err_goto(err, error_handler);
g_printf(" Maximum workgroup size : %lu\n",
(unsigned long) k_wg_size);
/* Only show info about CL_KERNEL_PREFERRED_WORK_GROUP_SIZE_MULTIPLE
* if OpenCL version of the underlying platform is >= 1.1. */
if (ocl_ver >= 110) {
k_pref_wg_size_mult = ccl_kernel_get_workgroup_info_scalar(krnl,
dev, CL_KERNEL_PREFERRED_WORK_GROUP_SIZE_MULTIPLE, size_t, &err);
ccl_if_err_goto(err, error_handler);
g_printf(" Preferred multiple of workgroup size : %lu\n",
(unsigned long) k_pref_wg_size_mult);
}
k_compile_wg_size = ccl_kernel_get_workgroup_info_array(krnl, dev,
CL_KERNEL_COMPILE_WORK_GROUP_SIZE, size_t*, &err);
ccl_if_err_goto(err, error_handler);
g_printf(" WG size in __attribute__ qualifier : (%lu, %lu, %lu)\n",
(unsigned long) k_compile_wg_size[0],
(unsigned long) k_compile_wg_size[1],
(unsigned long) k_compile_wg_size[2]);
k_loc_mem_size = ccl_kernel_get_workgroup_info_scalar(krnl, dev,
CL_KERNEL_LOCAL_MEM_SIZE, cl_ulong, &err);
ccl_if_err_goto(err, error_handler);
g_printf(" Local memory used by kernel : %lu bytes\n",
(unsigned long) k_loc_mem_size);
k_priv_mem_size = ccl_kernel_get_workgroup_info_scalar(krnl, dev,
CL_KERNEL_PRIVATE_MEM_SIZE, cl_ulong, &err);
ccl_if_err_goto(err, error_handler);
g_printf(" Min. private mem. used by each workitem : %lu bytes\n",
(unsigned long) k_priv_mem_size);
g_printf("\n");
/* ************** */
/* Error handling */
/* ************** */
/* If we get here, no need for error checking, jump to cleanup. */
g_assert(err == NULL);
status = CCL_SUCCESS;
goto cleanup;
error_handler:
/* If we got here there was an error, verify that it is so. */
g_assert(err != NULL);
g_fprintf(stderr, "%s\n", err->message);
status = (err->domain == CCL_ERROR) ? err->code : CCL_ERROR_OTHER;
g_error_free(err);
cleanup:
/* *********** */
/* Free stuff! */
/* *********** */
if (prg != NULL) ccl_program_destroy(prg);
if (ctx != NULL) ccl_context_destroy(ctx);
/* Confirm that memory allocated by wrappers has been properly
* freed. */
g_return_val_if_fail(ccl_wrapper_memcheck(), CCL_ERROR_OTHER);
/* Return status. */
return status;
}
/**
* Image filter main function.
* */
int main(int argc, char * argv[]) {
/* Wrappers for OpenCL objects. */
CCLContext * ctx;
CCLDevice * dev;
CCLImage * img_in;
CCLImage * img_out;
CCLQueue * queue;
CCLProgram * prg;
CCLKernel * krnl;
CCLSampler * smplr;
/* Device selected specified in the command line. */
int dev_idx = -1;
/* Error handling object (must be initialized to NULL). */
CCLErr * err = NULL;
/* Does selected device support images? */
cl_bool image_ok;
/* Image data in host. */
unsigned char * input_image;
unsigned char * output_image;
/* Image properties. */
int width, height, n_channels;
/* Image file write status. */
int file_write_status;
/* Image parameters. */
cl_image_format image_format = { CL_RGBA, CL_UNSIGNED_INT8 };
/* Origin and region of complete image. */
size_t origin[3] = { 0, 0, 0 };
size_t region[3];
/* Real worksize. */
size_t real_ws[2];
/* Global and local worksizes. */
size_t gws[2];
size_t lws[2];
/* Check arguments. */
if (argc < 2) {
ERROR_MSG_AND_EXIT("Usage: image_filter <image_file> [device_index]");
} else if (argc >= 3) {
/* Check if a device was specified in the command line. */
dev_idx = atoi(argv[2]);
}
/* Load image. */
input_image = stbi_load(argv[1], &width, &height, &n_channels, 4);
if (!input_image) ERROR_MSG_AND_EXIT(stbi_failure_reason());
/* Real work size. */
real_ws[0] = width; real_ws[1] = height;
/* Set image region. */
region[0] = width; region[1] = height; region[2] = 1;
/* Create context using device selected from menu. */
ctx = ccl_context_new_from_menu_full(&dev_idx, &err);
HANDLE_ERROR(err);
/* Get first device in context. */
dev = ccl_context_get_device(ctx, 0, &err);
HANDLE_ERROR(err);
/* Ask device if it supports images. */
image_ok = ccl_device_get_info_scalar(
dev, CL_DEVICE_IMAGE_SUPPORT, cl_bool, &err);
HANDLE_ERROR(err);
if (!image_ok)
ERROR_MSG_AND_EXIT("Selected device doesn't support images.");
/* Create a command queue. */
queue = ccl_queue_new(ctx, dev, 0, &err);
HANDLE_ERROR(err);
/* Create 2D input image using loaded image data. */
img_in = ccl_image_new(ctx, CL_MEM_READ_ONLY | CL_MEM_COPY_HOST_PTR,
&image_format, input_image, &err,
"image_type", (cl_mem_object_type) CL_MEM_OBJECT_IMAGE2D,
"image_width", (size_t) width,
"image_height", (size_t) height,
NULL);
HANDLE_ERROR(err);
/* Create 2D output image. */
img_out = ccl_image_new(ctx, CL_MEM_WRITE_ONLY,
&image_format, NULL, &err,
"image_type", (cl_mem_object_type) CL_MEM_OBJECT_IMAGE2D,
"image_width", (size_t) width,
"image_height", (size_t) height,
NULL);
HANDLE_ERROR(err);
/* Create program from kernel source and compile it. */
prg = ccl_program_new_from_source(ctx, FILTER_KERNEL, &err);
HANDLE_ERROR(err);
ccl_program_build(prg, NULL, &err);
HANDLE_ERROR(err);
/* Get kernel wrapper. */
krnl = ccl_program_get_kernel(prg, "do_filter", &err);
HANDLE_ERROR(err);
/* Determine nice local and global worksizes. */
ccl_kernel_suggest_worksizes(krnl, dev, 2, real_ws, gws, lws, &err);
HANDLE_ERROR(err);
/* Show information to user. */
printf("\n * Image size: %d x %d, %d channels\n",
width, height, n_channels);
printf(" * Global work-size: (%d, %d)\n", (int) gws[0], (int) gws[1]);
printf(" * Local work-size: (%d, %d)\n", (int) lws[0], (int) lws[1]);
/* Create sampler (this could also be created in-kernel). */
smplr = ccl_sampler_new(ctx, CL_FALSE, CL_ADDRESS_CLAMP_TO_EDGE,
CL_FILTER_NEAREST, &err);
HANDLE_ERROR(err);
/* Apply filter. */
ccl_kernel_set_args_and_enqueue_ndrange(
krnl, queue, 2, NULL, gws, lws, NULL, &err,
img_in, img_out, smplr, NULL);
HANDLE_ERROR(err);
/* Allocate space for output image. */
output_image = (unsigned char *)
malloc(width * height * 4 * sizeof(unsigned char));
/* Read image data back to host. */
ccl_image_enqueue_read(img_out, queue, CL_TRUE, origin, region,
0, 0, output_image, NULL, &err);
HANDLE_ERROR(err);
/* Write image to file. */
file_write_status = stbi_write_png(IMAGE_FILE, width, height, 4,
output_image, width * 4);
/* Give feedback. */
if (file_write_status) {
fprintf(stdout, "\nImage saved in file '" IMAGE_FILE "'\n");
} else {
ERROR_MSG_AND_EXIT("Unable to save image in file.");
}
/* Release host images. */
free(output_image);
stbi_image_free(input_image);
/* Release wrappers. */
ccl_image_destroy(img_in);
ccl_image_destroy(img_out);
ccl_sampler_destroy(smplr);
ccl_program_destroy(prg);
ccl_queue_destroy(queue);
ccl_context_destroy(ctx);
/* Check all wrappers have been destroyed. */
assert(ccl_wrapper_memcheck());
/* Terminate. */
return EXIT_SUCCESS;
}
/**
* Main program.
*
* @param argc Number of command line arguments.
* @param argv Vector of command line arguments.
* @return @link clo_error_codes::CLO_SUCCESS @endlink if program
* terminates successfully, or another value of #clo_error_codes if an
* error occurs.
* */
int main(int argc, char **argv)
{
/* Status var aux */
int status;
/* Context object for command line argument parsing. */
GOptionContext *context = NULL;
/* Test data structures. */
cl_uchar* host_data = NULL;
size_t bytes;
cl_ulong total_time;
FILE *outfile = NULL;
CloType clotype_elem;
/* Sorter object. */
CloSort* sorter = NULL;
/* cf4ocl wrappers. */
CCLQueue* cq_exec = NULL;
CCLQueue* cq_comm = NULL;
CCLContext* ctx = NULL;
CCLDevice* dev = NULL;
/* Profiler object. */
CCLProf* prof;
/* Host-based random number generator (mersenne twister) */
GRand* rng_host = NULL;
/* Error management object. */
GError *err = NULL;
/* Sorting benchmarks. */
cl_ulong** benchmarks = NULL;
/* Parse command line options. */
context = g_option_context_new (" - " CLO_SORT_DESCRIPTION);
g_option_context_add_main_entries(context, entries, NULL);
g_option_context_parse(context, &argc, &argv, &err);
g_if_err_goto(err, error_handler);
clotype_elem = clo_type_by_name(
type != NULL ? type : CLO_SORT_BENCHMARK_TYPE, &err);
g_if_err_goto(err, error_handler);
if (algorithm == NULL) algorithm = g_strdup(CLO_SORT_BENCHMARK_ALGORITHM);
if (alg_options == NULL) alg_options = g_strdup(CLO_SORT_BENCHMARK_ALG_OPTS);
/* Determine size in bytes of each element to sort. */
bytes = clo_type_sizeof(clotype_elem);
/* Initialize random number generator. */
rng_host = g_rand_new_with_seed(rng_seed);
/* Get the context wrapper and the chosen device. */
ctx = ccl_context_new_from_menu_full(&dev_idx, &err);
g_if_err_goto(err, error_handler);
dev = ccl_context_get_device(ctx, 0, &err);
g_if_err_goto(err, error_handler);
/* Get sorter object. */
sorter = clo_sort_new(
algorithm, alg_options, ctx, &clotype_elem, NULL, NULL, NULL,
compiler_opts, &err);
g_if_err_goto(err, error_handler);
/* Create command queues. */
cq_exec = ccl_queue_new(ctx, dev, CL_QUEUE_PROFILING_ENABLE, &err);
g_if_err_goto(err, error_handler);
cq_comm = ccl_queue_new(ctx, dev, 0, &err);
g_if_err_goto(err, error_handler);
/* Create benchmarks table. */
benchmarks = g_new(cl_ulong*, maxpo2);
for (unsigned int i = 0; i < maxpo2; i++)
benchmarks[i] = g_new0(cl_ulong, runs);
/* Print options. */
printf("\n =========================== Selected options ============================\n\n");
printf(" Random number generator seed: %u\n", rng_seed);
printf(" Maximum local worksize (0 is auto-select): %d\n", (int) lws);
printf(" Type of elements to sort: %s\n", clo_type_get_name(clotype_elem));
printf(" Number of runs: %d\n", runs);
printf(" Compiler Options: %s\n", compiler_opts);
/* Create host buffer. */
host_data = g_slice_alloc(bytes * (1 << maxpo2));
/* Perform test. */
for (unsigned int N = 4; N <= maxpo2; N++) {
unsigned int num_elems = 1 << N;
gboolean sorted_ok = TRUE;
for (unsigned int r = 0; r < runs; r++) {
/* Initialize host buffer. */
for (unsigned int i = 0; i < num_elems; i++) {
clo_bench_rand(
rng_host, clotype_elem, host_data + bytes * i);
}
/* Perform sort. */
clo_sort_with_host_data(sorter, cq_exec, cq_comm,
host_data, host_data, num_elems, lws, &err);
g_if_err_goto(err, error_handler);
/* Perform profiling. */
prof = ccl_prof_new();
ccl_prof_add_queue(prof, "q_exec", cq_exec);
ccl_prof_calc(prof, &err);
g_if_err_goto(err, error_handler);
/* Save duration to benchmarks. */
benchmarks[N - 1][r] = ccl_prof_get_duration(prof);
ccl_prof_destroy(prof);
/* Check if sorting was well performed. */
sorted_ok = TRUE;
/* Wait on host thread for data transfer queue to finish... */
ccl_queue_finish(cq_comm, &err);
g_if_err_goto(err, error_handler);
/* Start check. */
for (unsigned int i = 0; i < num_elems - 1; i++) {
/* Perform comparison. */
if (clo_bench_compare(clotype_elem, host_data + bytes*i,
host_data + bytes*(i + 1)) > 0) {
sorted_ok = FALSE;
break;
}
}
}
/* Print info. */
total_time = 0;
for (unsigned int i = 0; i < runs; i++)
total_time += benchmarks[N - 1][i];
printf(" - 2^%d: %lf Mkeys/s %s\n", N,
(1e-6 * num_elems * runs) / (total_time * 1e-9),
sorted_ok ? "" : "(sort did not work)");
}
/* Save benchmarks to file, if filename was given as cli option. */
if (out) {
outfile = fopen(out, "w");
for (unsigned int i = 0; i < maxpo2; i++) {
fprintf(outfile, "%d", i);
for (unsigned int j = 0; j < runs; j++) {
fprintf(outfile, "\t%lu", (unsigned long)benchmarks[i][j]);
}
fprintf(outfile, "\n");
}
fclose(outfile);
}
/* If we get here, everything went Ok. */
status = CLO_SUCCESS;
g_assert(err == NULL);
goto cleanup;
error_handler:
/* Handle error. */
g_assert(err != NULL);
fprintf(stderr, "Error: %s\n", err->message);
g_error_free(err);
cleanup:
/* Free sorter object. */
if (sorter) clo_sort_destroy(sorter);
/* Free command line options. */
if (context) g_option_context_free(context);
if (algorithm) g_free(algorithm);
if (alg_options) g_free(alg_options);
if (compiler_opts) g_free(compiler_opts);
if (out) g_free(out);
/* Free host-based random number generator. */
if (rng_host) g_rand_free(rng_host);
/* Free OpenCL wrappers. */
if (cq_exec) ccl_queue_destroy(cq_exec);
if (cq_comm) ccl_queue_destroy(cq_comm);
if (ctx) ccl_context_destroy(ctx);
/* Free host resources */
if (host_data) g_slice_free1(bytes * (1 << maxpo2), host_data);
/* Free benchmarks. */
if (benchmarks) {
for (unsigned int i = 0; i < maxpo2; i++)
if (benchmarks[i]) g_free(benchmarks[i]);
g_free(benchmarks);
}
/* Bye. */
return status;
}
/**
* Canonical example main function.
* */
int main(int argc, char** argv) {
/* Number of elements in buffer. */
size_t buf_n = DEF_BUF_N;
/* Device selected specified in the command line. */
int dev_idx = -1;
/* Program return value. */
int ret_val;
/* Check if a device was specified in the command line. */
if (argc >= 2) {
dev_idx = atoi(argv[1]);
}
/* Check if a new buffer size was specified in the command line. */
if (argc >= 3) {
buf_n = atoi(argv[2]);
}
/* Wrappers. */
CCLContext* ctx = NULL;
CCLProgram* prg = NULL;
CCLDevice* dev = NULL;
CCLQueue* queue = NULL;
CCLKernel* krnl = NULL;
CCLBuffer* a_dev;
CCLBuffer* b_dev;
CCLBuffer* c_dev;
CCLEvent* evt_write1;
CCLEvent* evt_write2;
CCLEvent* evt_exec;
CCLEventWaitList ewl = NULL;
/* Profiler. */
CCLProf* prof;
/* Global and local worksizes. */
size_t gws = 0;
size_t lws = 0;
/* Host buffers. */
cl_uint* a_host = NULL;
cl_uint* b_host = NULL;
cl_uint* c_host = NULL;
cl_uint d_host;
/* Error reporting object. */
CCLErr* err = NULL;
/* Check results flag. */
cl_bool check_result;
/* Create a context with device selected from menu. */
ctx = ccl_context_new_from_menu_full(&dev_idx, &err);
HANDLE_ERROR(err);
/* Get the selected device. */
dev = ccl_context_get_device(ctx, 0, &err);
HANDLE_ERROR(err);
/* Create a new program from kernel source. */
prg = ccl_program_new_from_source(ctx, KERNEL_SRC, &err);
HANDLE_ERROR(err);
/* Build program. */
ccl_program_build(prg, NULL, &err);
HANDLE_ERROR(err);
/* Create a command queue. */
queue = ccl_queue_new(ctx, dev, CL_QUEUE_PROFILING_ENABLE, &err);
HANDLE_ERROR(err);
/* Get kernel object. */
krnl = ccl_program_get_kernel(prg, KERNEL_NAME, &err);
HANDLE_ERROR(err);
/* Get worksizes. */
lws = ccl_kernel_suggest_worksizes(krnl, dev, 1, &buf_n, &gws, &lws, &err);
HANDLE_ERROR(err);
/* Show worksizes. */
printf("\n");
printf(" * Global worksize: %d\n", (int) gws);
printf(" * Local worksize : %d\n", (int) lws);
/* Initialize host buffers. */
a_host = (cl_uint*) malloc(sizeof(cl_uint) * buf_n);
b_host = (cl_uint*) malloc(sizeof(cl_uint) * buf_n);
c_host = (cl_uint*) malloc(sizeof(cl_uint) * buf_n);
/* Fill host buffers. */
for (cl_uint i = 0; i < buf_n; ++i) {
a_host[i] = i;
b_host[i] = buf_n - i;
}
d_host = buf_n / 4;
/* Create device buffers. */
a_dev = ccl_buffer_new(ctx, CL_MEM_READ_ONLY,
buf_n * sizeof(cl_uint), NULL, &err);
HANDLE_ERROR(err);
b_dev = ccl_buffer_new(ctx, CL_MEM_READ_ONLY,
buf_n * sizeof(cl_uint), NULL, &err);
HANDLE_ERROR(err);
c_dev = ccl_buffer_new(ctx, CL_MEM_WRITE_ONLY,
buf_n * sizeof(cl_uint), NULL, &err);
HANDLE_ERROR(err);
/* Copy host data to device buffers without waiting for transfer
* to terminate before continuing host program. */
evt_write1 = ccl_buffer_enqueue_write(a_dev, queue, CL_FALSE, 0,
buf_n * sizeof(cl_uint), a_host, NULL, &err);
HANDLE_ERROR(err);
evt_write2 = ccl_buffer_enqueue_write(b_dev, queue, CL_FALSE, 0,
buf_n * sizeof(cl_uint), b_host, NULL, &err);
HANDLE_ERROR(err);
/* Initialize event wait list and add the two transfer events. */
ccl_event_wait_list_add(&ewl, evt_write1, evt_write2, NULL);
/* Execute program kernel, waiting for the two transfer events
* to terminate (this will empty the event wait list). */
evt_exec = ccl_program_enqueue_kernel(prg, KERNEL_NAME, queue, 1,
NULL, &gws, &lws, &ewl, &err,
/* Kernel arguments. */
a_dev, b_dev, c_dev,
ccl_arg_priv(d_host, cl_uint), ccl_arg_priv(buf_n, cl_uint),
NULL);
HANDLE_ERROR(err);
/* Add the kernel termination event to the wait list. */
ccl_event_wait_list_add(&ewl, evt_exec, NULL);
/* Sync. queue for events in wait list (just the execute event in
* this case) to terminate before going forward... */
ccl_enqueue_barrier(queue, &ewl, &err);
HANDLE_ERROR(err);
/* Read back results from host waiting for transfer to terminate
* before continuing host program. */
ccl_buffer_enqueue_read(c_dev, queue, CL_TRUE, 0,
buf_n * sizeof(cl_uint), c_host, NULL, &err);
HANDLE_ERROR(err);
/* Check results are as expected (not available with OpenCL stub). */
check_result = CL_TRUE;
for (cl_uint i = 0; i < buf_n; ++i) {
if(c_host[i] != a_host[i] + b_host[i] + d_host) {
check_result = CL_FALSE;
break;
}
}
if (check_result) {
fprintf(stdout, " * Kernel execution produced the expected results.\n");
ret_val = EXIT_SUCCESS;
} else {
fprintf(stderr,
" * Kernel execution failed to produce the expected results.\n");
ret_val = EXIT_FAILURE;
}
/* Perform profiling. */
prof = ccl_prof_new();
ccl_prof_add_queue(prof, "queue1", queue);
ccl_prof_calc(prof, &err);
HANDLE_ERROR(err);
/* Show profiling info. */
ccl_prof_print_summary(prof);
/* Export profiling info. */
ccl_prof_export_info_file(prof, "out.tsv", &err);
HANDLE_ERROR(err);
/* Destroy profiler object. */
ccl_prof_destroy(prof);
/* Destroy host buffers. */
free(a_host);
free(b_host);
free(c_host);
/* Destroy wrappers. */
ccl_buffer_destroy(a_dev);
ccl_buffer_destroy(b_dev);
ccl_buffer_destroy(c_dev);
ccl_queue_destroy(queue);
ccl_program_destroy(prg);
ccl_context_destroy(ctx);
/* Confirm that memory allocated by wrappers has been properly freed. */
assert(ccl_wrapper_memcheck());
/* Bye. */
return ret_val;
}
