int main (int argc, char *argv[])
{
int j, n;
cgsize_t ne;
int fnum, bnum, znum, snum, cnum;
cgsize_t size[3];
float exp[5];
char *outfile = "elemtest.cgns";
unlink (outfile);
if (cg_open (outfile, CG_MODE_WRITE, &fnum) ||
cg_base_write (fnum, "Base", 3, 3, &bnum) ||
cg_goto(fnum, bnum, NULL) ||
cg_dataclass_write(CGNS_ENUMV(NormalizedByDimensional)))
cg_error_exit ();
for (n = 0; n < 5; n++)
exp[n] = (float)0.0;
exp[1] = (float)1.0;
/* zone with linear elements */
size[0] = 11;
size[1] = 12;
size[2] = 0;
if (cg_zone_write (fnum, bnum, "1:Linear", size,
CGNS_ENUMV(Unstructured), &znum) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateX", xc, &cnum) ||
cg_goto(fnum, bnum, "Zone_t", znum, "GridCoordinates", 0,
"CoordinateX", 0, NULL) ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateY", yc, &cnum) ||
cg_gopath(fnum, "../CoordinateY") ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateZ", zc, &cnum) ||
cg_gopath(fnum, "../CoordinateZ") ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp))
cg_error_exit ();
ne = j = 0;
/* NGON_n first so polyhedra face references are correct */
if (cg_section_write (fnum, bnum, znum, "NGON_n", CGNS_ENUMV(NGON_n),
ne+1, ne+npoly, 0, poly, &snum))
cg_error_exit();
ne += npoly;
/* NODE */
if (cg_section_write (fnum, bnum, znum, "NODE", CGNS_ENUMV(NODE),
ne+1, ne+1, 0, node, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(NODE);
elems[j++] = node[0];
/* BAR_2 */
if (cg_section_write (fnum, bnum, znum, "BAR_2", CGNS_ENUMV(BAR_2),
ne+1, ne+1, 0, bar, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(BAR_2);
for (n = 0; n < 2; n++)
elems[j++] = bar[n];
/* TRI_3 */
if (cg_section_write (fnum, bnum, znum, "TRI_3", CGNS_ENUMV(TRI_3),
ne+1, ne+1, 0, tri, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(TRI_3);
for (n = 0; n < 3; n++)
elems[j++] = tri[n];
/* QUAD_4 */
if (cg_section_write (fnum, bnum, znum, "QUAD_4", CGNS_ENUMV(QUAD_4),
ne+1, ne+1, 0, quad9, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(QUAD_4);
for (n = 0; n < 4; n++)
elems[j++] = quad9[n];
/* TETRA_4 */
if (cg_section_write (fnum, bnum, znum, "TETRA_4", CGNS_ENUMV(TETRA_4),
ne+1, ne+1, 0, tetra, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(TETRA_4);
for (n = 0; n < 4; n++)
elems[j++] = tetra[n];
/* PYRA_5 */
if (cg_section_write (fnum, bnum, znum, "PYRA_5", CGNS_ENUMV(PYRA_5),
ne+1, ne+1, 0, pyra, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(PYRA_5);
for (n = 0; n < 5; n++)
elems[j++] = pyra[n];
/* PENTA_6 */
if (cg_section_write (fnum, bnum, znum, "PENTA_6", CGNS_ENUMV(PENTA_6),
ne+1, ne+1, 0, penta, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(PENTA_6);
for (n = 0; n < 6; n++)
elems[j++] = penta[n];
/* HEXA_8 */
if (cg_section_write (fnum, bnum, znum, "HEXA_8", CGNS_ENUMV(HEXA_8),
ne+1, ne+1, 0, hexa, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(HEXA_8);
for (n = 0; n < 8; n++)
elems[j++] = hexa[n];
/* MIXED */
if (cg_section_write (fnum, bnum, znum, "MIXED", CGNS_ENUMV(MIXED),
ne+1, ne+8, 0, elems, &snum))
cg_error_exit ();
ne += 8;
/* NFACE_n */
if (cg_section_write (fnum, bnum, znum, "NFACE_n", CGNS_ENUMV(NFACE_n),
ne+1, ne+nface, 0, face, &snum))
cg_error_exit ();
/* zone with quadratic elements */
size[0] = 42;
size[1] = 8;
size[2] = 0;
if (cg_zone_write (fnum, bnum, "2:Quadratic", size,
CGNS_ENUMV(Unstructured), &znum) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateX", xc, &cnum) ||
cg_goto(fnum, bnum, "Zone_t", znum, "GridCoordinates", 0,
"CoordinateX", 0, NULL) ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateY", yc, &cnum) ||
cg_gopath(fnum, "../CoordinateY") ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateZ", zc, &cnum) ||
cg_gopath(fnum, "../CoordinateZ") ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp))
cg_error_exit ();
ne = j = 0;
/* BAR_3 */
if (cg_section_write (fnum, bnum, znum, "BAR_3", CGNS_ENUMV(BAR_3),
ne+1, ne+1, 0, bar, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(BAR_3);
for (n = 0; n < 3; n++)
elems[j++] = bar[n];
/* TRI_6 */
if (cg_section_write (fnum, bnum, znum, "TRI_6", CGNS_ENUMV(TRI_6),
ne+1, ne+1, 0, tri, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(TRI_6);
for (n = 0; n < 6; n++)
elems[j++] = tri[n];
/* QUAD_8 */
if (cg_section_write (fnum, bnum, znum, "QUAD_8", CGNS_ENUMV(QUAD_8),
ne+1, ne+1, 0, quad9, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(QUAD_8);
for (n = 0; n < 8; n++)
elems[j++] = quad9[n];
/* TETRA_10 */
if (cg_section_write (fnum, bnum, znum, "TETRA_10", CGNS_ENUMV(TETRA_10),
ne+1, ne+1, 0, tetra, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(TETRA_10);
for (n = 0; n < 10; n++)
elems[j++] = tetra[n];
/* PYRA_13 */
if (cg_section_write (fnum, bnum, znum, "PYRA_13", CGNS_ENUMV(PYRA_13),
ne+1, ne+1, 0, pyra, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(PYRA_13);
for (n = 0; n < 13; n++)
elems[j++] = pyra[n];
/* PENTA_15 */
if (cg_section_write (fnum, bnum, znum, "PENTA_15", CGNS_ENUMV(PENTA_15),
ne+1, ne+1, 0, penta, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(PENTA_15);
for (n = 0; n < 15; n++)
elems[j++] = penta[n];
/* HEXA_20 */
if (cg_section_write (fnum, bnum, znum, "HEXA_20", CGNS_ENUMV(HEXA_20),
ne+1, ne+1, 0, hexa, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(HEXA_20);
for (n = 0; n < 20; n++)
elems[j++] = hexa[n];
/* MIXED */
if (cg_section_write (fnum, bnum, znum, "MIXED", CGNS_ENUMV(MIXED),
ne+1, ne+7, 0, elems, &snum))
cg_error_exit ();
ne += 7;
/* zone with quadratic elements with mid-nodes */
size[0] = 42;
size[1] = 8;
size[2] = 0;
if (cg_zone_write (fnum, bnum, "3:Quadratic with mid-nodes", size,
CGNS_ENUMV(Unstructured), &znum) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateX", xc, &cnum) ||
cg_goto(fnum, bnum, "Zone_t", znum, "GridCoordinates", 0,
"CoordinateX", 0, NULL) ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateY", yc, &cnum) ||
cg_gopath(fnum, "../CoordinateY") ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateZ", zc, &cnum) ||
cg_gopath(fnum, "../CoordinateZ") ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp))
cg_error_exit ();
ne = j = 0;
/* QUAD_9 */
if (cg_section_write (fnum, bnum, znum, "QUAD_9", CGNS_ENUMV(QUAD_9),
ne+1, ne+1, 0, quad9, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(QUAD_9);
for (n = 0; n < 9; n++)
elems[j++] = quad9[n];
/* TETRA_10 */
if (cg_section_write (fnum, bnum, znum, "TETRA_10", CGNS_ENUMV(TETRA_10),
ne+1, ne+1, 0, tetra, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(TETRA_10);
for (n = 0; n < 10; n++)
elems[j++] = tetra[n];
/* PYRA_14 */
if (cg_section_write (fnum, bnum, znum, "PYRA_14", CGNS_ENUMV(PYRA_14),
ne+1, ne+1, 0, pyra, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(PYRA_14);
for (n = 0; n < 14; n++)
elems[j++] = pyra[n];
/* PENTA_18 */
if (cg_section_write (fnum, bnum, znum, "PENTA_18", CGNS_ENUMV(PENTA_18),
ne+1, ne+1, 0, penta, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(PENTA_18);
for (n = 0; n < 18; n++)
elems[j++] = penta[n];
/* HEXA_27 */
if (cg_section_write (fnum, bnum, znum, "HEXA_27", CGNS_ENUMV(HEXA_27),
ne+1, ne+1, 0, hexa, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(HEXA_27);
for (n = 0; n < 27; n++)
elems[j++] = hexa[n];
/* MIXED */
if (cg_section_write (fnum, bnum, znum, "MIXED", CGNS_ENUMV(MIXED),
ne+1, ne+5, 0, elems, &snum))
cg_error_exit ();
ne += 5;
/* zone with cubic elements */
size[0] = 55;
size[1] = 8;
size[2] = 0;
if (cg_zone_write (fnum, bnum, "4:Cubic", size,
CGNS_ENUMV(Unstructured), &znum) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateX", x3, &cnum) ||
cg_goto(fnum, bnum, "Zone_t", znum, "GridCoordinates", 0,
"CoordinateX", 0, NULL) ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateY", y3, &cnum) ||
cg_gopath(fnum, "../CoordinateY") ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp) ||
cg_coord_write (fnum, bnum, znum, CGNS_ENUMV(RealDouble),
"CoordinateZ", zc, &cnum) ||
cg_gopath(fnum, "../CoordinateZ") ||
cg_exponents_write(CGNS_ENUMV(RealSingle), exp))
cg_error_exit ();
ne = j = 0;
/* BAR_4 */
if (cg_section_write (fnum, bnum, znum, "BAR_4", CGNS_ENUMV(BAR_4),
ne+1, ne+1, 0, bar4, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(BAR_4);
for (n = 0; n < 4; n++)
elems[j++] = bar4[n];
/* TRI_9 */
if (cg_section_write (fnum, bnum, znum, "TRI_9", CGNS_ENUMV(TRI_9),
ne+1, ne+1, 0, tri9, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(TRI_9);
for (n = 0; n < 9; n++)
elems[j++] = tri9[n];
/* QUAD_12 */
if (cg_section_write (fnum, bnum, znum, "QUAD_12", CGNS_ENUMV(QUAD_12),
ne+1, ne+1, 0, quad12, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(QUAD_12);
for (n = 0; n < 12; n++)
elems[j++] = quad12[n];
/* TETRA_16 */
if (cg_section_write (fnum, bnum, znum, "TETRA_16", CGNS_ENUMV(TETRA_16),
ne+1, ne+1, 0, tetra16, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(TETRA_16);
for (n = 0; n < 16; n++)
elems[j++] = tetra16[n];
/* PYRA_21 */
if (cg_section_write (fnum, bnum, znum, "PYRA_21", CGNS_ENUMV(PYRA_21),
ne+1, ne+1, 0, pyra21, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(PYRA_21);
for (n = 0; n < 21; n++)
elems[j++] = pyra21[n];
/* PENTA_24 */
if (cg_section_write (fnum, bnum, znum, "PENTA_24", CGNS_ENUMV(PENTA_24),
ne+1, ne+1, 0, penta24, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(PENTA_24);
for (n = 0; n < 24; n++)
elems[j++] = penta24[n];
/* HEXA_32 */
if (cg_section_write (fnum, bnum, znum, "HEXA_32", CGNS_ENUMV(HEXA_32),
ne+1, ne+1, 0, hexa32, &snum))
cg_error_exit ();
ne++;
elems[j++] = (int)CGNS_ENUMV(HEXA_32);
for (n = 0; n < 32; n++)
elems[j++] = hexa32[n];
/* MIXED */
if (cg_section_write (fnum, bnum, znum, "MIXED", CGNS_ENUMV(MIXED),
ne+1, ne+7, 0, elems, &snum))
cg_error_exit ();
ne += 7;
if (cg_close (fnum)) cg_error_exit ();
return 0;
}
int main (int argc, char **argv)
{
int n, i, j, k, nuser, dim = 1;
int cgfile, cgbase, cgzone, cgcoord, cgdset;
int size[9];
int ptlist[3] = {1, 2, 3};
int ptrange[6] = {1, 1, 1, 2, 2, 2};
int bcpoints[6], bcfaces[6];
static char *fname = "gotest.cgns";
char name[33];
float data1 = 1;
float data2 = 2;
float exponents[8], rate[3], center[3];
GridLocation_t gridloc;
int ordinal, ndata, cgfam, cgbc, nunits, nexps;
int elecflag, magnflag, condflag, dirichlet, neumann;
PointSetType_t pttype;
DataClass_t dclass;
DataType_t dtype;
BCType_t bctype;
MassUnits_t mass;
LengthUnits_t length;
TimeUnits_t time;
TemperatureUnits_t temp;
AngleUnits_t angle;
ElectricCurrentUnits_t current;
SubstanceAmountUnits_t amount;
LuminousIntensityUnits_t intensity;
ModelType_t elecmodel;
ModelType_t magnmodel;
ModelType_t emconduct;
/* errors and warnings go to error_exit */
cg_configure(CG_CONFIG_ERROR, (void *)error_exit);
for (n = 0; n < 8; n++)
exponents[n] = (float)n;
for (n = 0; n < 3; n++) {
rate[n] = (float)n;
center[n] = (float)n;
}
for (n = 0; n < NUM_SIDE*NUM_SIDE*NUM_SIDE; n++)
coord[n] = (float)n;
unlink (fname);
printf ("creating CGNS file %s\n", fname);
cg_open (fname, CG_MODE_WRITE, &cgfile);
cg_base_write (cgfile, "Base", 3, 3, &cgbase);
/* write electomagnetics model under base */
puts ("writing electromagnetics");
cg_goto(cgfile, cgbase, NULL);
cg_equationset_write (3);
cg_goto(cgfile, cgbase, "FlowEquationSet_t", 1, NULL);
cg_model_write("EMElectricFieldModel_t", Voltage);
cg_model_write("EMMagneticFieldModel_t", Interpolated);
cg_model_write("EMConductivityModel_t", Equilibrium_LinRessler);
/* write rotating coordinates under family_t */
puts ("writing family/rotating");
cg_family_write(cgfile, cgbase, "Family", &cgfam);
/* go to a named node */
cg_goto(cgfile, cgbase, "Family", 0, NULL);
cg_rotating_write (rate, center);
/* write BCDataSet under FamilyBC_t */
puts("writing FamilyBCDataSet");
cg_fambc_write(cgfile, cgbase, cgfam, "FamilyBC", BCWall, &cgbc);
/* relative go to */
cg_gorel(cgfile, "FamilyBC_t", cgbc, NULL);
cg_bcdataset_write ("FamilyBCDataSet", BCWallInviscid, Dirichlet);
/* write user data under base */
puts("writing user defined data under base");
/* relative path */
cg_gopath (cgfile, "../..");
cg_user_data_write ("User");
/* absolute path */
cg_gopath (cgfile, "/Base/User");
cg_gridlocation_write (CellCenter);
cg_famname_write ("Family");
cg_ordinal_write (0);
cg_array_write ("Data1", RealSingle, 1, &dim, &data1);
cg_array_write ("Data2", RealSingle, 1, &dim, &data2);
for (n = 1; n <= 2; n++) {
cg_goto (cgfile, cgbase, "User", 0, "DataArray_t", n, "end");
cg_dataclass_write (Dimensional);
cg_units_write (Kilogram, Meter, Second, Kelvin, Radian);
cg_exponents_write (RealSingle, exponents);
}
/* this should fail since ptset not allowed as child of
user data, except below a zone_t node */
cg_configure(CG_CONFIG_ERROR, NULL);
if (cg_ptset_write (PointList, 1, ptlist) == CG_OK)
printf ("WHAT!! - ptset should not work under base/userdata\n");
cg_configure(CG_CONFIG_ERROR, (void *)error_exit);
/* write zone */
puts("writing zone");
for (n = 0; n < 3; n++) {
size[n] = NUM_SIDE;
size[n+3] = NUM_SIDE - 1;
size[n+6] = 0;
}
cg_zone_write (cgfile, cgbase, "Zone", size, Structured, &cgzone);
cg_coord_write(cgfile, cgbase, cgzone, RealSingle,
"CoordinateX", coord, &cgcoord);
cg_coord_write(cgfile, cgbase, cgzone, RealSingle,
"CoordinateY", coord, &cgcoord);
cg_coord_write(cgfile, cgbase, cgzone, RealSingle,
"CoordinateZ", coord, &cgcoord);
/* create a BC node with point range and Dirichlet node*/
puts("writing Dirichlet BC with vertex range");
for (n = 0; n < 3; n++) {
bcpoints[n] = 1;
bcpoints[n+3] = NUM_SIDE;
bcfaces[n] = 1;
bcfaces[n+3] = NUM_SIDE - 1;
}
bcpoints[5] = bcfaces[5] = 1;
cg_boco_write (cgfile, cgbase, cgzone, "BC", BCWall,
PointList, 1, bcpoints, &cgbc);
cg_dataset_write (cgfile, cgbase, cgzone, cgbc,
"DataSet", BCWallViscous, &cgdset);
cg_bcdata_write (cgbase, cgfile, cgzone, cgbc, cgdset, Dirichlet);
/* create Dirichlet data at faces */
puts("writing Dirichlet data at faces");
cg_gopath (cgfile, "/Base/Zone/ZoneBC/BC/DataSet");
cg_gridlocation_write (KFaceCenter);
cg_ptset_write (PointRange, 2, bcfaces);
size[0] = (NUM_SIDE - 1) * (NUM_SIDE - 1);
cg_gorel (cgfile, "BCData_t", Dirichlet, NULL);
cg_array_write ("Data", RealSingle, 1, size, coord);
/* write recursive user data */
puts("writing recursive user defined data under zone");
cg_goto(cgfile, cgbase, "Zone", 0, NULL);
for (i = 1; i <= 4; i++) {
sprintf (name, "User%d", i);
cg_user_data_write (name);
cg_gorel(cgfile, name, 0, NULL);
cg_gridlocation_write (CellCenter);
cg_famname_write ("Family");
cg_ordinal_write (i);
cg_ptset_write (PointList, 1, ptlist);
cg_array_write ("Data1", RealSingle, 1, &dim, &data1);
cg_array_write ("Data2", RealSingle, 1, &dim, &data2);
for (n = 1; n <= 2; n++) {
cg_gorel (cgfile, "DataArray_t", n, "end");
cg_dataclass_write (Dimensional);
cg_unitsfull_write (Kilogram, Meter, Second, Kelvin, Radian,
Ampere, Mole, Candela);
cg_expfull_write (RealSingle, exponents);
cg_gopath (cgfile, "..");
}
for (j = 1; j <= 3; j++) {
sprintf (name, "User%d.%d", i, j);
cg_user_data_write (name);
cg_gopath (cgfile, name);
cg_gridlocation_write (Vertex);
cg_famname_write ("Family");
cg_ordinal_write (i + j);
cg_ptset_write (PointRange, 2, ptrange);
cg_array_write ("Data1", RealSingle, 1, &dim, &data1);
cg_array_write ("Data2", RealSingle, 1, &dim, &data2);
for (n = 1; n <= 2; n++) {
cg_gorel (cgfile, "DataArray_t", n, "end");
cg_dataclass_write (Dimensional);
cg_unitsfull_write (Kilogram, Meter, Second, Kelvin,
Radian, Ampere, Mole, Candela);
cg_expfull_write (RealSingle, exponents);
cg_gorel (cgfile, "..", 0, NULL);
}
for (k = 1; k <= 2; k++) {
sprintf (name, "User%d.%d.%d", i, j, k);
cg_user_data_write (name);
cg_gorel (cgfile, name, 0, NULL);
cg_array_write ("Data1", RealSingle, 1, &dim, &data1);
cg_array_write ("Data2", RealSingle, 1, &dim, &data2);
for (n = 1; n <= 2; n++) {
cg_gorel (cgfile, "DataArray_t", n, "end");
cg_dataclass_write (Dimensional);
cg_unitsfull_write (Kilogram, Meter, Second, Kelvin,
Radian, Ampere, Mole, Candela);
cg_expfull_write (RealSingle, exponents);
cg_gopath (cgfile, "..");
}
for (n = 1; n <= 2; n++) {
sprintf (name, "User%d.%d.%d.%d", i, j, k, n);
cg_user_data_write (name);
cg_gopath (cgfile, name);
cg_array_write ("Data1", RealSingle, 1, &dim, &data1);
cg_array_write ("Data2", RealSingle, 1, &dim, &data2);
cg_gopath (cgfile, "..");
}
cg_gopath (cgfile, "..");
}
cg_gopath (cgfile, "..");
}
cg_gopath (cgfile, "..");
}
puts ("closing and reopening in read mode");
cg_close (cgfile);
/* read file and check values */
cg_configure(CG_CONFIG_ERROR, NULL);
if (cg_open (fname, CG_MODE_READ, &cgfile))
cg_error_exit ();
cgbase = cgzone = 1;
/* check electomagnetics model under base */
puts ("checking electromagnetics");
if (cg_goto(cgfile, cgbase, NULL) ||
cg_equationset_elecmagn_read(&elecflag, &magnflag, &condflag) ||
cg_goto(cgfile, cgbase, "FlowEquationSet_t", 1, NULL) ||
cg_model_read ("EMElectricFieldModel_t", &elecmodel) ||
cg_model_read ("EMMagneticFieldModel_t", &magnmodel) ||
cg_model_read ("EMConductivityModel_t", &emconduct))
cg_error_exit();
CHECK ("ElectricFieldFlag", elecflag == 1);
CHECK ("ElectricFieldModel", elecmodel == Voltage);
CHECK ("MagneticFieldFlag", magnflag == 1);
CHECK ("MagneticFieldModel", magnmodel == Interpolated);
CHECK ("EMConductivityFlag", condflag == 1);
CHECK ("EMConductivityModel", emconduct == Equilibrium_LinRessler);
/* check rotating coordinates under family_t */
puts ("checking family/rotating");
if (cg_goto(cgfile, cgbase, "Family_t", 1, NULL) ||
cg_rotating_read (rate, center))
cg_error_exit();
for (n = 0; n < 3; n++) {
CHECK ("rotation rate", rate[n] == (float)n);
CHECK ("rotation center", center[n] == (float)n);
}
/* check BCDataSet under FamilyBC_t */
puts("checking FamilyBCDataSet");
*name = 0;
if (cg_goto(cgfile, cgbase, "Family_t", 1, "FamilyBC_t", 1, NULL) ||
cg_bcdataset_info(&ndata) ||
cg_bcdataset_read (1, name, &bctype, &dirichlet, &neumann))
cg_error_exit();
CHECK("bcdataset_info", ndata == 1);
CHECK("bcdatset name", strcmp(name, "FamilyBCDataSet") == 0);
CHECK("bcdatset type", bctype == BCWallInviscid);
CHECK("bcdatset dirichlet", dirichlet == 1);
CHECK("bcdatset neumann", neumann == 0);
/* check BC data */
puts("checking BC data");
if (cg_boco_info (cgfile, cgbase, cgzone, 1, name, &bctype, &pttype,
&n, size, &i, &dtype, &ndata))
cg_error_exit();
CHECK("BC_t name", strcmp(name, "BC") == 0);
CHECK("BC_t type", bctype == BCWall);
CHECK("BC_t pntset type", pttype == PointList);
CHECK("BC_t npnts", n == 1);
if (cg_dataset_read (cgfile, cgbase, cgzone, 1, 1, name,
&bctype, &dirichlet, &neumann) ||
cg_goto (cgfile, cgbase, "Zone_t", 1, "ZoneBC_t", 1, "BC_t", 1,
"BCDataSet_t", 1, NULL) ||
cg_gridlocation_read (&gridloc) ||
cg_ptset_info (&pttype, &n))
cg_error_exit();
CHECK("BCDataSet_t name", strcmp(name, "DataSet") == 0);
CHECK("BCDataSet_t type", bctype == BCWallViscous);
CHECK("BCDataSet_t location", gridloc == KFaceCenter);
CHECK("BCDataSet_t pntset type", pttype == PointRange);
CHECK("BC_t npnts", n == 2);
CHECK("BCDataSet_t dirichlet", dirichlet == 1);
CHECK("BCDataSet_t neumann", neumann == 0);
/* check user defined data */
puts("checking user defined data");
*name = 0;
if (cg_goto (cgfile, cgbase, "UserDefinedData_t", 1, "end") ||
cg_gridlocation_read (&gridloc) ||
cg_famname_read (name) ||
cg_ordinal_read (&ordinal) ||
cg_narrays (&ndata))
cg_error_exit ();
CHECK ("gridlocation", gridloc == CellCenter);
CHECK ("famname", strcmp (name, "Family") == 0);
CHECK ("ordinal", ordinal == 0);
CHECK ("narrays", ndata == 2);
if (cg_goto (cgfile, cgbase, "Zone_t", cgzone, "end") ||
cg_nuser_data (&nuser))
cg_error_exit ();
CHECK ("nuserdata", nuser == 4);
for (i = 1; i <= 4; i++) {
*name = 0;
if (cg_goto (cgfile, cgbase, "Zone_t", cgzone,
"UserDefinedData_t", i, "end") ||
cg_gridlocation_read (&gridloc) ||
cg_famname_read (name) ||
cg_ordinal_read (&ordinal) ||
cg_ptset_info (&pttype, &n) ||
cg_ptset_read (ptlist) ||
cg_narrays (&ndata) ||
cg_nuser_data (&nuser))
cg_error_exit ();
CHECK ("gridlocation", gridloc == CellCenter);
CHECK ("famname", strcmp (name, "Family") == 0);
CHECK ("ordinal", ordinal == i);
CHECK ("pointtype", pttype == PointList);
CHECK ("npoints", n == 1);
CHECK ("narrays", ndata == 2);
CHECK ("nuserdata", nuser == 3);
for (j = 1; j <= 3; j++) {
*name = 0;
if (cg_goto (cgfile, cgbase, "Zone_t", cgzone,
"UserDefinedData_t", i,
"UserDefinedData_t", j, "end") ||
cg_gridlocation_read (&gridloc) ||
cg_famname_read (name) ||
cg_ordinal_read (&ordinal) ||
cg_ptset_info (&pttype, &n) ||
cg_ptset_read (ptlist) ||
cg_narrays (&ndata) ||
cg_nuser_data (&nuser))
cg_error_exit ();
CHECK ("gridlocation", gridloc == Vertex);
CHECK ("famname", strcmp (name, "Family") == 0);
CHECK ("ordinal", ordinal == (i + j));
CHECK ("pointtype", pttype == PointRange);
CHECK ("npoints", n == 2);
CHECK ("narrays", ndata == 2);
CHECK ("nuserdata", nuser == 2);
for (n = 1; n <= 2; n++) {
if (cg_goto (cgfile, cgbase, "Zone_t", cgzone,
"UserDefinedData_t", i,
"UserDefinedData_t", j,
"DataArray_t", n, "end") ||
cg_dataclass_read (&dclass) ||
cg_nunits (&nunits) ||
cg_unitsfull_read (&mass, &length, &time, &temp, &angle,
¤t, &amount, &intensity) ||
cg_nexponents (&nexps) ||
cg_expfull_read (exponents))
cg_error_exit ();
CHECK ("dataclass", dclass == Dimensional);
CHECK ("nunits", nunits == 8);
CHECK ("massunits", mass == Kilogram);
CHECK ("lengthunits", length == Meter);
CHECK ("timeunits", time == Second);
CHECK ("tempunits", temp == Kelvin);
CHECK ("angleunits", angle == Radian);
CHECK ("currentunits", current == Ampere);
CHECK ("amountunits", amount == Mole);
CHECK ("intensityunits", intensity == Candela);
CHECK ("nexponents", nexps == 8);
for (n = 0; n < 8; n++)
CHECK ("exponents", exponents[n] == (float)n);
}
}
}
if (cg_goto (cgfile, cgbase, "Zone_t", cgzone,
"UserDefinedData_t", 2, "UserDefinedData_t", 2,
"UserDefinedData_t", 2, "UserDefinedData_t", 1, "end") ||
cg_narrays (&ndata) ||
cg_nuser_data (&nuser) ||
cg_array_info (2, name, &dtype, &n, &dim) ||
cg_array_read (1, &data1) ||
cg_array_read (2, &data2))
cg_error_exit ();
CHECK ("narrays", ndata == 2);
CHECK ("nuserdata", nuser == 0);
CHECK ("arrayname", strcmp (name, "Data2") == 0);
CHECK ("datatype", dtype == RealSingle);
CHECK ("ndims", n == 1);
CHECK ("dims", dim == 1);
CHECK ("data1", data1 == 1.0);
CHECK ("data2", data2 == 2.0);
/* read partial units/exponents as full */
puts("checking units and exponents");
if (cg_goto(cgfile, cgbase, "UserDefinedData_t", 1,
"DataArray_t", 1, NULL) ||
cg_nunits (&nunits) ||
cg_unitsfull_read (&mass, &length, &time, &temp, &angle,
¤t, &amount, &intensity) ||
cg_nexponents (&nexps) ||
cg_expfull_read (exponents))
cg_error_exit ();
CHECK ("nunits", nunits == 5);
CHECK ("massunits", mass == Kilogram);
CHECK ("lengthunits", length == Meter);
CHECK ("timeunits", time == Second);
CHECK ("tempunits", temp == Kelvin);
CHECK ("angleunits", angle == Radian);
CHECK ("currentunits", current == 0);
CHECK ("amountunits", amount == 0);
CHECK ("intensityunits", intensity == 0);
CHECK ("nexponents", nexps == 5);
for (n = 0; n < 5; n++)
CHECK ("exponents", exponents[n] == (float)n);
for (n = 6; n < 8; n++)
CHECK ("exponents", exponents[n] == (float)0.0);
/* read full units/exponents as partial */
if (cg_goto(cgfile, cgbase, "Zone_t", 1, "UserDefinedData_t", 1,
"DataArray_t", 1, NULL) ||
cg_nunits (&nunits) ||
cg_units_read (&mass, &length, &time, &temp, &angle) ||
cg_nexponents (&nexps) ||
cg_exponents_read (exponents))
cg_error_exit ();
CHECK ("nunits", nunits == 8);
CHECK ("massunits", mass == Kilogram);
CHECK ("lengthunits", length == Meter);
CHECK ("timeunits", time == Second);
CHECK ("tempunits", temp == Kelvin);
CHECK ("angleunits", angle == Radian);
CHECK ("nexponents", nexps == 8);
for (n = 0; n < 5; n++)
CHECK ("exponents", exponents[n] == (float)n);
puts ("closing file and reopening in modify mode");
cg_close (cgfile);
/* delete userdata node */
if (cg_open (fname, CG_MODE_MODIFY, &cgfile))
cg_error_exit ();
puts ("deleting user defined data and checking");
if (cg_goto (cgfile, 1, "Zone_t", 1,
"UserDefinedData_t", 3,
"UserDefinedData_t", 2,
"UserDefinedData_t", 1, "end") ||
cg_nuser_data (&nuser))
cg_error_exit ();
CHECK ("nuserdata", nuser == 2);
if (cg_delete_node ("User3.2.1.1") ||
cg_nuser_data (&nuser))
cg_error_exit ();
CHECK ("nuserdata", nuser == 1);
/* don't compress file on close */
cg_configure(CG_CONFIG_COMPRESS, (void *)0);
puts ("closing file");
cg_close (cgfile);
return 0;
}
