uint32_t temp_values_handler() {
uint32_t err_code = NRF_SUCCESS;
int32_t temp_buffer;
err_code = bme280_read_temperature(&temp_buffer);
if (err_code != NRF_SUCCESS) {
// temp_printf("temp: bme280_read_temperature() failed.\r\n");
return err_code;
}
char val[20];
char time_val[20];
add_zeroes((int)temp_buffer, val);
add_zeroes((int)getTimeStamp(), time_val);
char buf[20];
sprintf(buf, "\n%d,%s,%s", DEVICE_ID,time_val,val);
log2sd(buf, "READINGS.txt");
// temp_printf("li\n");
// temp_printf("Temperature: %d\n", (int)temp_buffer);
err_code = ble_ambient_sensor_update(m_temp.m_amb, (uint8_t *) &temp_buffer,
AMB_TEMP_MAX_PACKET_VALUE, BLE_AMBIENT_TEMP);
check_ble_service_err_code(err_code);
return NRF_SUCCESS;
}
uint32_t rain_reset_configs(){
uint32_t err_code = NRF_SUCCESS;
//Set service to default configurations
err_code = ble_ambient_config_update(m_rain.m_amb, RAIN_INITIAL_CONFIG, BLE_AMBIENT_RAIN);
if(err_code != NRF_SUCCESS){
rain_printf("ble_ambient_config_update() for RAIN failed.\r\n");
return err_code;
}
err_code = rain_configs_update();
if(err_code != NRF_SUCCESS){
rain_printf("rain_configs_update() failed.\r\n");
return err_code;
}
//Reset sensor values
uint8_t rain_buffer[AMB_RAIN_MAX_PACKET_VALUE];
for(uint8_t i = 0; i < AMB_RAIN_MAX_PACKET_VALUE; i++) rain_buffer[i] = INVALID_SENSOR_VALUE;
check_ble_service_err_code(
ble_ambient_sensor_update(m_rain.m_amb, rain_buffer, AMB_RAIN_MAX_PACKET_VALUE, BLE_AMBIENT_RAIN));
return NRF_SUCCESS;
}
uint32_t temp_reset_configs(){
uint32_t err_code = NRF_SUCCESS;
//Set service to default configurations
err_code = ble_ambient_config_update(m_temp.m_amb, TEMP_INITIAL_CONFIG, BLE_AMBIENT_TEMP);
if(err_code != NRF_SUCCESS){
temp_printf("ble_ambient_config_update() for TEMP failed.\r\n");
return err_code;
}
err_code = temp_configs_update();
if(err_code != NRF_SUCCESS){
temp_printf("temp_configs_update() failed.\r\n");
return err_code;
}
//Reset sensor values
uint8_t temp_buffer[AMB_TEMP_MAX_PACKET_VALUE];
for(uint8_t i = 0; i < AMB_TEMP_MAX_PACKET_VALUE; i++) temp_buffer[i] = INVALID_SENSOR_VALUE;
check_ble_service_err_code(ble_ambient_sensor_update(m_temp.m_amb, temp_buffer, AMB_TEMP_MAX_PACKET_VALUE, BLE_AMBIENT_TEMP));
return NRF_SUCCESS;
}
uint32_t lum_values_handler() {
uint32_t err_code = NRF_SUCCESS;
uint32_t lum_buffer;
//return NRF_SUCCESS;
//SparkFunTSL2561_init();
err_code = SparkFunTSL2561_bring_the_light(&lum_buffer);
//err_code = SparkFunMS1_read(&lum_buffer);
if (err_code != NRF_SUCCESS) {
lum_printf("lum: SparkFunTSL2561_bring_the_light failed.\r\n");
return err_code;
}
char buf[12];
sprintf(buf, "%d,%d,%d,%d,\n", DEVICE_ID,SENSOR_LUM_ID,(int)lum_buffer,000);
log2sd(buf, "TEMP.txt");
lum_printf("Luminosity: %d\r\n", (int)lum_buffer);
err_code = ble_ambient_sensor_update(m_lum.m_amb, (uint8_t *) &lum_buffer,
AMB_LUM_MAX_PACKET_VALUE, BLE_AMBIENT_LUM);
check_ble_service_err_code(err_code);
return NRF_SUCCESS;
}
uint32_t lum_reset_configs(){
uint32_t err_code = NRF_SUCCESS;
//Set service to default configurations
err_code = ble_ambient_config_update(m_lum.m_amb, LUM_INITIAL_CONFIG, BLE_AMBIENT_LUM);
if(err_code != NRF_SUCCESS){
lum_printf("ble_ambient_config_update() for LUM failed.\r\n");
return err_code;
}
err_code = lum_configs_update();
if(err_code != NRF_SUCCESS){
lum_printf("lum_configs_update() failed.\r\n");
return err_code;
}
//Reset sensor values
uint8_t lum_buffer[AMB_LUM_MAX_PACKET_VALUE];
for(uint8_t i = 0; i < AMB_LUM_MAX_PACKET_VALUE; i++) lum_buffer[i] = INVALID_SENSOR_VALUE;
check_ble_service_err_code(
ble_ambient_sensor_update(m_lum.m_amb, lum_buffer, AMB_LUM_MAX_PACKET_VALUE, BLE_AMBIENT_LUM));
return NRF_SUCCESS;
}
uint32_t hum_values_handler() {
uint32_t err_code = NRF_SUCCESS;
int32_t hum_buffer;
err_code = bme280_read_humidity(&hum_buffer);
if (err_code != NRF_SUCCESS) {
// hum_printf("hum: bme280_read_pressure() failed.\r\n");
return err_code;
}
char val[20];
add_zeroes((int)hum_buffer, val);
char buf[20];
sprintf(buf, ",%s", val);
log2sd(buf, "READINGS.txt");
// hum_printf("Humidity: %d\r\n", (int)hum_buffer);
// hum_printf("li\n");
//err_code = ble_ambient_sensor_update(m_hum.m_amb, (uint8_t *) &hum_buffer,
//AMB_HUM_MAX_PACKET_VALUE, BLE_AMBIENT_HUM);
check_ble_service_err_code(err_code);
return NRF_SUCCESS;
}
uint32_t rain_values_handler() {
uint32_t err_code;
uint8_t rain_buffer;
err_code = SparkFunMS1_read1(&rain_buffer);
char buf[12];
sprintf(buf, ",%d", (int)err_code); //bool, has no zeroes.
log2sd(buf, "READINGS.txt");
// rain_printf("li\n");
// rain_printf("Rain: %d value: %d \r\n", (int)err_code,(int)rain_buffer);
err_code = ble_ambient_sensor_update(m_rain.m_amb, (uint8_t *) &err_code,
AMB_RAIN_MAX_PACKET_VALUE, BLE_AMBIENT_RAIN);
check_ble_service_err_code(err_code);
return NRF_SUCCESS;
}
uint32_t temp_values_handler() {
uint32_t err_code = NRF_SUCCESS;
int32_t temp_buffer;
err_code = bme280_read_temperature(&temp_buffer);
if (err_code != NRF_SUCCESS) {
temp_printf("temp: bme280_read_temperature() failed.\r\n");
return err_code;
}
char buf[12];
sprintf(buf, "%d,%d,%d,%d,\n", DEVICE_ID,SENSOR_TEMP_ID,(int)temp_buffer,000);
log2sd(buf, "TEMP.txt");
lerCartao();
temp_printf("Temperature: %d\n", (int)temp_buffer);
err_code = ble_ambient_sensor_update(m_temp.m_amb, (uint8_t *) &temp_buffer,
AMB_TEMP_MAX_PACKET_VALUE, BLE_AMBIENT_TEMP);
check_ble_service_err_code(err_code);
return NRF_SUCCESS;
}
