static void __init acclaim_wifi_init(void)
{
struct device *dev;
struct omap_mmc_platform_data *pdata;
int ret;
printk(KERN_WARNING"%s: start\n", __func__);
ret = gpio_request(GPIO_WIFI_PMENA, "wifi_pmena");
if (ret < 0) {
pr_err("%s: can't reserve GPIO: %d\n", __func__,
GPIO_WIFI_PMENA);
goto out;
}
gpio_direction_output(GPIO_WIFI_PMENA, 0);
gpio_export(GPIO_WIFI_PMENA, true);
ret = gpio_request(GPIO_WIFI_PWEN, "wifi_pwen");
if (ret < 0) {
pr_err("%s: can't reserve GPIO: %d\n", __func__,
GPIO_WIFI_PWEN);
goto out;
}
gpio_direction_output(GPIO_WIFI_PWEN, 0);
gpio_export(GPIO_WIFI_PWEN, true);
ret = gpio_request(GPIO_WIFI_IRQ, "wifi_irq");
if (ret < 0) {
printk(KERN_ERR "%s: can't reserve GPIO: %d\n", __func__,
GPIO_WIFI_IRQ);
goto out;
}
gpio_direction_input(GPIO_WIFI_IRQ);
dev = mmc[2].dev;
if (!dev) {
pr_err("wl12xx mmc device initialization failed\n");
goto out;
}
pdata = dev->platform_data;
if (!pdata) {
pr_err("Platfrom data of wl12xx device not set\n");
goto out;
}
pdata->slots[0].set_power = wl12xx_set_power;
config_wlan_mux ();
if (wl12xx_set_platform_data(&omap4_acclaim_wlan_data))
pr_err("Error setting wl12xx data\n");
out:
return;
}
static void __init omap_sdp_init(void)
{
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
//omap_board_config = sdp_config;
//omap_board_config_size = ARRAY_SIZE(sdp_config);
evt_peripherals_init();
evt_lcd_panel_init();
config_wlan_mux();
conn_add_plat_device();
//zoom_peripherals_init();
//zoom_display_init();
//board_smc91x_init();
//board_flash_init(sdp_flash_partitions, chip_sel_sdp, NAND_BUSWIDTH_16);
enable_board_wakeup_source();
//usbhs_init(&usbhs_bdata);
#if CONFIG_ION_OMAP //Henry Li
omap_register_ion();
#endif
}
static void zoom3_wifi_init(void)
{
config_wlan_mux();
if (wl12xx_set_platform_data(&zoom3_wlan_data))
pr_err("Error setting wl12xx data\n");
}
void __init acclaim_peripherals_init(void)
{
int status;
int package = OMAP_PACKAGE_CBS;
ulong sdram_size = get_sdram_size();
ramconsole_init();
if (omap_rev() == OMAP4430_REV_ES1_0)
package = OMAP_PACKAGE_CBL;
omap4_mux_init(board_mux, package);
acclaim_board_init();
if (sdram_vendor() == SAMSUNG_SDRAM) {
if (sdram_size == SZ_512M) {
omap_emif_setup_device_details(&emif_devices_512_samsung, &emif_devices_512_samsung);
} else if (sdram_size == SZ_1G) {
omap_emif_setup_device_details(&emif_devices_samsung, &emif_devices_samsung);
} else {
pr_err("sdram memory size does not exist, default to using 1024MB \n");
omap_emif_setup_device_details(&emif_devices_samsung, &emif_devices_samsung);
}
printk(KERN_INFO"Samsung DDR Memory \n");
} else if (sdram_vendor() == ELPIDA_SDRAM) {
if (sdram_size == SZ_512M) {
omap_emif_setup_device_details(&emif_devices_512_elpida, &emif_devices_512_elpida);
} else if (sdram_size == SZ_1G) {
omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
} else {
pr_err("sdram memory size does not exist, default to using 1024MB \n");
omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
}
printk(KERN_INFO"Elpida DDR Memory \n");
} else if (sdram_vendor() == HYNIX_SDRAM) {
/* Re-use ELPIDA timings as they are absolutely the same */
if (sdram_size == SZ_512M) {
omap_emif_setup_device_details(&emif_devices_512_elpida, &emif_devices_512_elpida);
} else if (sdram_size == SZ_1G) {
omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
} else {
pr_err("sdram memory size does not exist, default to using 1024MB \n");
omap_emif_setup_device_details(&emif_devices_elpida, &emif_devices_elpida);
}
printk(KERN_INFO"Hynix DDR Memory \n");
} else
pr_err("Memory type does not exist\n");
omap_init_emif_timings();
enable_rtc_gpio();
omap4_i2c_init();
platform_add_devices(sdp4430_devices, ARRAY_SIZE(sdp4430_devices));
acclaim_init_charger();
wake_lock_init(&uart_lock, WAKE_LOCK_SUSPEND, "uart_wake_lock");
omap_serial_init(omap_serial_platform_data);
omap4_twl6030_hsmmc_init(mmc);
#ifdef CONFIG_TIWLAN_SDIO
config_wlan_mux();
#else
//omap4_4430sdp_wifi_init();
#endif
kxtf9_dev_init();
#ifdef CONFIG_BATTERY_MAX17042
max17042_dev_init();
#endif
usb_uhhtll_init(&usbhs_pdata);
usb_musb_init(&musb_board_data);
status = omap4_keypad_initialization(&sdp4430_keypad_data);
if (status)
pr_err("Keypad initialization failed: %d\n", status);
spi_register_board_info(sdp4430_spi_board_info,
ARRAY_SIZE(sdp4430_spi_board_info));
acclaim_panel_init();
enable_board_wakeup_source();
omap_voltage_register_pmic(&omap_pmic_core, "core");
omap_voltage_register_pmic(&omap_pmic_mpu, "mpu");
omap_voltage_register_pmic(&omap_pmic_iva, "iva");
omap_voltage_init_vc(&vc_config);
}
