u32 ddr3_init(void)
{
u32 ddr3_size;
struct ddr3_spd_cb spd_cb;
if (ddr3_get_dimm_params_from_spd(&spd_cb)) {
printf("Sorry, I don't know how to configure DDR3A.\n"
"Bye :(\n");
for (;;)
;
}
printf("Detected SO-DIMM [%s]\n", spd_cb.dimm_name);
if ((cpu_revision() > 1) ||
(__raw_readl(KS2_RSTCTRL_RSTYPE) & 0x1)) {
printf("DDR3 speed %d\n", spd_cb.ddrspdclock);
if (spd_cb.ddrspdclock == 1600)
init_pll(&ddr3a_400);
else
init_pll(&ddr3a_333);
}
if (cpu_revision() > 0) {
if (cpu_revision() > 1) {
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
spd_cb.phy_cfg.zq0cr1 |= 0x10000;
spd_cb.phy_cfg.zq1cr1 |= 0x10000;
spd_cb.phy_cfg.zq2cr1 |= 0x10000;
}
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &(spd_cb.phy_cfg));
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &(spd_cb.emif_cfg));
ddr3_size = spd_cb.ddr_size_gbyte;
} else {
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &(spd_cb.phy_cfg));
spd_cb.emif_cfg.sdcfg |= 0x1000;
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE, &(spd_cb.emif_cfg));
ddr3_size = spd_cb.ddr_size_gbyte / 2;
}
printf("DRAM: %d GiB (includes reported below)\n", ddr3_size);
/* Apply the workaround for PG 1.0 and 1.1 Silicons */
if (cpu_revision() <= 1)
ddr3_err_reset_workaround();
return ddr3_size;
}
int print_cpuinfo(void)
{
u16 cpu = get_part_number();
u8 rev = cpu_revision();
puts("CPU: ");
switch (cpu) {
case CPU_66AK2Hx:
puts("66AK2Hx SR");
break;
case CPU_66AK2Lx:
puts("66AK2Lx SR");
break;
case CPU_66AK2Ex:
puts("66AK2Ex SR");
break;
case CPU_66AK2Gx:
puts("66AK2Gx SR");
break;
default:
puts("Unknown\n");
}
if (rev == 2)
puts("2.0\n");
else if (rev == 1)
puts("1.1\n");
else if (rev == 0)
puts("1.0\n");
return 0;
}
struct pll_init_data *get_pll_init_data(int pll)
{
int speed;
struct pll_init_data *data = NULL;
u8 sysclk_index = get_sysclk_index();
switch (pll) {
case MAIN_PLL:
speed = get_max_dev_speed(dev_speeds);
data = &main_pll_config[sysclk_index][speed];
break;
case TETRIS_PLL:
speed = get_max_arm_speed(speeds);
data = &tetris_pll_config[sysclk_index][speed];
break;
case NSS_PLL:
data = &nss_pll_config[sysclk_index];
break;
case UART_PLL:
data = &uart_pll_config[sysclk_index];
break;
case DDR3_PLL:
if (cpu_revision() & CPU_66AK2G1x) {
speed = get_max_arm_speed(speeds);
if (speed == SPD1000)
data = &ddr3_pll_config_1066[sysclk_index];
else
data = &ddr3_pll_config_800[sysclk_index];
} else {
data = &ddr3_pll_config_800[sysclk_index];
}
break;
default:
data = NULL;
}
return data;
}
void ddr3_init(void)
{
char dimm_name[32];
ddr3_get_dimm_params(dimm_name);
printf("Detected SO-DIMM [%s]\n", dimm_name);
if (!strcmp(dimm_name, "18KSF1G72HZ-1G6E2 ")) {
init_pll(&ddr3a_400);
if (cpu_revision() > 0) {
if (cpu_revision() > 1) {
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
ddr3phy_1600_8g.zq0cr1 |= 0x10000;
ddr3phy_1600_8g.zq1cr1 |= 0x10000;
ddr3phy_1600_8g.zq2cr1 |= 0x10000;
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1600_8g);
} else {
/* PG 1.1 */
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1600_8g);
}
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1600_8g);
printf("DRAM: Capacity 8 GiB (includes reported below)\n");
ddr3_size = 8;
} else {
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1600_8g);
ddr3_1600_8g.sdcfg |= 0x1000;
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1600_8g);
printf("DRAM: Capacity 4 GiB (includes reported below)\n");
ddr3_size = 4;
}
} else if (!strcmp(dimm_name, "SQR-SD3T-2G1333SED")) {
init_pll(&ddr3a_333);
if (cpu_revision() > 0) {
if (cpu_revision() > 1) {
/* PG 2.0 */
/* Reset DDR3A PHY after PLL enabled */
ddr3_reset_ddrphy();
ddr3phy_1333_2g.zq0cr1 |= 0x10000;
ddr3phy_1333_2g.zq1cr1 |= 0x10000;
ddr3phy_1333_2g.zq2cr1 |= 0x10000;
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1333_2g);
} else {
/* PG 1.1 */
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC,
&ddr3phy_1333_2g);
}
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1333_2g);
ddr3_size = 2;
printf("DRAM: 2 GiB");
} else {
ddr3_init_ddrphy(KS2_DDR3A_DDRPHYC, &ddr3phy_1333_2g);
ddr3_1333_2g.sdcfg |= 0x1000;
ddr3_init_ddremif(KS2_DDR3A_EMIF_CTRL_BASE,
&ddr3_1333_2g);
ddr3_size = 1;
printf("DRAM: 1 GiB");
}
} else {
printf("Unknown SO-DIMM. Cannot configure DDR3\n");
while (1)
;
}
/* Apply the workaround for PG 1.0 and 1.1 Silicons */
if (cpu_revision() <= 1)
ddr3_err_reset_workaround();
}
