/* ------------------------------------------------------------------------- */
void init(void)
{
/*
most important: configure layer enable as output and low
as the latches are not able to source more than one layer
at once
*/
PORTC = 0;
DDRC = 0xFF;
DDRA = 0xFF;
DDRD = 0xFF;
PORTA = 0;
PORTD = 0;
cube_show_init();
//usbInit();
//usbReset();
// USB Poll with Timer1 (16Bit)
TCCR1A = 0x00;
TCCR1B = (1 << CS10); // prescale = 0
TCNT1 = USB_POLL_TCNT_START;
TIMSK |= (1 << TOIE1);
// Timer2 (8Bit)
TCCR2 = 0x00;
TCCR2 |= (1 << WGM21); // CTC
TCCR2 |= (1 << CS22) | (1 << CS21) | (1 << CS20); // prescale = 1024
TCNT2 = 1;
OCR2 = 125; // Ergibt genau 0,008 Sekunden
TIMSK |= (1 << OCIE2);
_delay_ms(1);
sei();
_delay_ms(1);
qBlock[0] = 0;
qBlock[1] = 0;
qBlock[2] = 0;
qBlock[3] = 0;
qBlock[4] = 0;
qBlock[5] = 0;
qBlock[6] = 0;
falldown = 1;
sekunden = 0;
minuten = 0;
stunden = 0;
showTime = false;
uart_init(UART_BAUD_SELECT(BAUDRATE, F_CPU));
}
void init(void)
{
/*
most important: configure layer enable as output and low
as the latches are not able to source more than one layer
at once
*/
PORTC = 0;
DDRC = 0xFF;
DDRA = 0xFF;
DDRD = 0xFF;
PORTA = 0;
PORTD = 0;
cube_show_init();
_delay_ms(1);
sei();
_delay_ms(1);
}