static void cvm_oct_sgmii_poll(struct net_device *dev)
{
struct octeon_ethernet *priv = netdev_priv(dev);
cvmx_helper_link_info_t link_info;
link_info = cvmx_helper_link_get(priv->ipd_port);
if (link_info.u64 == priv->link_info)
return;
link_info = cvmx_helper_link_autoconf(priv->ipd_port);
priv->link_info = link_info.u64;
/* Tell the core */
cvm_oct_set_carrier(priv, link_info);
}
static void cvm_oct_adjust_link(struct net_device *dev)
{
struct octeon_ethernet *priv = netdev_priv(dev);
cvmx_helper_link_info_t link_info;
if (priv->last_link != priv->phydev->link) {
priv->last_link = priv->phydev->link;
link_info.u64 = 0;
link_info.s.link_up = priv->last_link ? 1 : 0;
link_info.s.full_duplex = priv->phydev->duplex ? 1 : 0;
link_info.s.speed = priv->phydev->speed;
cvmx_helper_link_set(priv->port, link_info);
cvm_oct_set_carrier(priv, link_info);
}
}
static void cvm_oct_rgmii_poll(struct net_device *dev)
{
struct octeon_ethernet *priv = netdev_priv(dev);
cvmx_helper_link_info_t link_info;
link_info = cvmx_helper_link_get(priv->port);
if (link_info.u64 == priv->link_info) {
/*
* If the 10Mbps preamble workaround is supported and we're
* at 10Mbps we may need to do some special checking.
*/
if (USE_10MBPS_PREAMBLE_WORKAROUND && (link_info.s.speed == 10)) {
/*
* Read the GMXX_RXX_INT_REG[PCTERR] bit and
* see if we are getting preamble errors.
*/
int interface = INTERFACE(priv->port);
int index = INDEX(priv->port);
union cvmx_gmxx_rxx_int_reg gmxx_rxx_int_reg;
gmxx_rxx_int_reg.u64 = cvmx_read_csr(CVMX_GMXX_RXX_INT_REG(index, interface));
if (gmxx_rxx_int_reg.s.pcterr) {
/*
* We are getting preamble errors at
* 10Mbps. Most likely the PHY is
* giving us packets with mis aligned
* preambles. In order to get these
* packets we need to disable preamble
* checking and do it in software.
*/
union cvmx_gmxx_rxx_frm_ctl gmxx_rxx_frm_ctl;
union cvmx_ipd_sub_port_fcs ipd_sub_port_fcs;
/* Disable preamble checking */
gmxx_rxx_frm_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL(index, interface));
gmxx_rxx_frm_ctl.s.pre_chk = 0;
cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL(index, interface), gmxx_rxx_frm_ctl.u64);
/* Disable FCS stripping */
ipd_sub_port_fcs.u64 = cvmx_read_csr(CVMX_IPD_SUB_PORT_FCS);
ipd_sub_port_fcs.s.port_bit &= 0xffffffffull ^ (1ull << priv->port);
cvmx_write_csr(CVMX_IPD_SUB_PORT_FCS, ipd_sub_port_fcs.u64);
/* Clear any error bits */
cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(index, interface), gmxx_rxx_int_reg.u64);
DEBUGPRINT("%s: Using 10Mbps with software preamble removal\n",
dev->name);
}
}
return;
}
/* If the 10Mbps preamble workaround is allowed we need to on
preamble checking, FCS stripping, and clear error bits on
every speed change. If errors occur during 10Mbps operation
the above code will change this stuff */
if (USE_10MBPS_PREAMBLE_WORKAROUND) {
union cvmx_gmxx_rxx_frm_ctl gmxx_rxx_frm_ctl;
union cvmx_ipd_sub_port_fcs ipd_sub_port_fcs;
union cvmx_gmxx_rxx_int_reg gmxx_rxx_int_reg;
int interface = INTERFACE(priv->port);
int index = INDEX(priv->port);
/* Enable preamble checking */
gmxx_rxx_frm_ctl.u64 = cvmx_read_csr(CVMX_GMXX_RXX_FRM_CTL(index, interface));
gmxx_rxx_frm_ctl.s.pre_chk = 1;
cvmx_write_csr(CVMX_GMXX_RXX_FRM_CTL(index, interface), gmxx_rxx_frm_ctl.u64);
/* Enable FCS stripping */
ipd_sub_port_fcs.u64 = cvmx_read_csr(CVMX_IPD_SUB_PORT_FCS);
ipd_sub_port_fcs.s.port_bit |= 1ull << priv->port;
cvmx_write_csr(CVMX_IPD_SUB_PORT_FCS, ipd_sub_port_fcs.u64);
/* Clear any error bits */
gmxx_rxx_int_reg.u64 = cvmx_read_csr(CVMX_GMXX_RXX_INT_REG(index, interface));
cvmx_write_csr(CVMX_GMXX_RXX_INT_REG(index, interface), gmxx_rxx_int_reg.u64);
}
if (priv->phydev == NULL) {
link_info = cvmx_helper_link_autoconf(priv->port);
priv->link_info = link_info.u64;
}
if (priv->phydev == NULL)
cvm_oct_set_carrier(priv, link_info);
}
