void cw1200_scan_work(struct work_struct *work)
{
struct cw1200_common *priv = container_of(work, struct cw1200_common,
scan.work);
struct ieee80211_channel **it;
struct wsm_scan scan = {
.type = WSM_SCAN_TYPE_FOREGROUND,
.flags = WSM_SCAN_FLAG_SPLIT_METHOD,
};
bool first_run = (priv->scan.begin == priv->scan.curr &&
priv->scan.begin != priv->scan.end);
int i;
if (first_run) {
/* Firmware gets crazy if scan request is sent
* when STA is joined but not yet associated.
* Force unjoin in this case.
*/
if (cancel_delayed_work_sync(&priv->join_timeout) > 0)
cw1200_join_timeout(&priv->join_timeout.work);
}
mutex_lock(&priv->conf_mutex);
if (first_run) {
if (priv->join_status == CW1200_JOIN_STATUS_STA &&
!(priv->powersave_mode.mode & WSM_PSM_PS)) {
struct wsm_set_pm pm = priv->powersave_mode;
pm.mode = WSM_PSM_PS;
cw1200_set_pm(priv, &pm);
} else if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
/* FW bug: driver has to restart p2p-dev mode
* after scan
*/
cw1200_disable_listening(priv);
}
}
if (!priv->scan.req || (priv->scan.curr == priv->scan.end)) {
struct cfg80211_scan_info info = {
.aborted = priv->scan.status ? 1 : 0,
};
if (priv->scan.output_power != priv->output_power)
wsm_set_output_power(priv, priv->output_power * 10);
if (priv->join_status == CW1200_JOIN_STATUS_STA &&
!(priv->powersave_mode.mode & WSM_PSM_PS))
cw1200_set_pm(priv, &priv->powersave_mode);
if (priv->scan.status < 0)
wiphy_warn(priv->hw->wiphy,
"[SCAN] Scan failed (%d).\n",
priv->scan.status);
else if (priv->scan.req)
wiphy_dbg(priv->hw->wiphy,
"[SCAN] Scan completed.\n");
else
wiphy_dbg(priv->hw->wiphy,
"[SCAN] Scan canceled.\n");
priv->scan.req = NULL;
cw1200_scan_restart_delayed(priv);
wsm_unlock_tx(priv);
mutex_unlock(&priv->conf_mutex);
ieee80211_scan_completed(priv->hw, &info);
up(&priv->scan.lock);
return;
} else {
struct ieee80211_channel *first = *priv->scan.curr;
for (it = priv->scan.curr + 1, i = 1;
it != priv->scan.end && i < WSM_SCAN_MAX_NUM_OF_CHANNELS;
++it, ++i) {
if ((*it)->band != first->band)
break;
if (((*it)->flags ^ first->flags) &
IEEE80211_CHAN_NO_IR)
break;
if (!(first->flags & IEEE80211_CHAN_NO_IR) &&
(*it)->max_power != first->max_power)
break;
}
scan.band = first->band;
if (priv->scan.req->no_cck)
scan.max_tx_rate = WSM_TRANSMIT_RATE_6;
else
scan.max_tx_rate = WSM_TRANSMIT_RATE_1;
scan.num_probes =
(first->flags & IEEE80211_CHAN_NO_IR) ? 0 : 2;
scan.num_ssids = priv->scan.n_ssids;
scan.ssids = &priv->scan.ssids[0];
scan.num_channels = it - priv->scan.curr;
/* TODO: Is it optimal? */
scan.probe_delay = 100;
/* It is not stated in WSM specification, however
* FW team says that driver may not use FG scan
* when joined.
*/
if (priv->join_status == CW1200_JOIN_STATUS_STA) {
scan.type = WSM_SCAN_TYPE_BACKGROUND;
scan.flags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
}
scan.ch = kcalloc(it - priv->scan.curr,
sizeof(struct wsm_scan_ch),
GFP_KERNEL);
if (!scan.ch) {
priv->scan.status = -ENOMEM;
goto fail;
}
for (i = 0; i < scan.num_channels; ++i) {
scan.ch[i].number = priv->scan.curr[i]->hw_value;
if (priv->scan.curr[i]->flags & IEEE80211_CHAN_NO_IR) {
scan.ch[i].min_chan_time = 50;
scan.ch[i].max_chan_time = 100;
} else {
scan.ch[i].min_chan_time = 10;
scan.ch[i].max_chan_time = 25;
}
}
if (!(first->flags & IEEE80211_CHAN_NO_IR) &&
priv->scan.output_power != first->max_power) {
priv->scan.output_power = first->max_power;
wsm_set_output_power(priv,
priv->scan.output_power * 10);
}
priv->scan.status = cw1200_scan_start(priv, &scan);
kfree(scan.ch);
if (priv->scan.status)
goto fail;
priv->scan.curr = it;
}
mutex_unlock(&priv->conf_mutex);
return;
fail:
priv->scan.curr = priv->scan.end;
mutex_unlock(&priv->conf_mutex);
queue_work(priv->workqueue, &priv->scan.work);
return;
}
void cw1200_scan_work(struct work_struct *work)
{
struct cw1200_common *priv = container_of(work, struct cw1200_common,
scan.work);
struct ieee80211_channel **it;
struct wsm_scan scan = {
.scanType = WSM_SCAN_TYPE_FOREGROUND,
.scanFlags = WSM_SCAN_FLAG_SPLIT_METHOD,
};
bool first_run = priv->scan.begin == priv->scan.curr &&
priv->scan.begin != priv->scan.end;
int i;
mutex_lock(&priv->conf_mutex);
if (first_run) {
if (priv->join_status == CW1200_JOIN_STATUS_STA &&
!(priv->powersave_mode.pmMode & WSM_PSM_PS)) {
struct wsm_set_pm pm = priv->powersave_mode;
pm.pmMode = WSM_PSM_PS;
cw1200_set_pm(priv, &pm);
} else if (priv->join_status == CW1200_JOIN_STATUS_MONITOR) {
/* FW bug: driver has to restart p2p-dev mode
* after scan */
cw1200_disable_listening(priv);
}
}
if (!priv->scan.req || (priv->scan.curr == priv->scan.end)) {
if (priv->scan.output_power != priv->output_power)
WARN_ON(wsm_set_output_power(priv,
priv->output_power * 10));
if (priv->join_status == CW1200_JOIN_STATUS_STA &&
!(priv->powersave_mode.pmMode & WSM_PSM_PS))
cw1200_set_pm(priv, &priv->powersave_mode);
if (priv->scan.status < 0)
wiphy_dbg(priv->hw->wiphy,
"[SCAN] Scan failed (%d).\n",
priv->scan.status);
else if (priv->scan.req)
wiphy_dbg(priv->hw->wiphy,
"[SCAN] Scan completed.\n");
else
wiphy_dbg(priv->hw->wiphy,
"[SCAN] Scan canceled.\n");
priv->scan.req = NULL;
cw1200_scan_restart_delayed(priv);
wsm_unlock_tx(priv);
mutex_unlock(&priv->conf_mutex);
ieee80211_scan_completed(priv->hw, priv->scan.status ? 1 : 0);
up(&priv->scan.lock);
return;
} else {
struct ieee80211_channel *first = *priv->scan.curr;
for (it = priv->scan.curr + 1, i = 1;
it != priv->scan.end && i < WSM_SCAN_MAX_NUM_OF_CHANNELS;
++it, ++i) {
if ((*it)->band != first->band)
break;
if (((*it)->flags ^ first->flags) &
IEEE80211_CHAN_PASSIVE_SCAN)
break;
if (!(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
(*it)->max_power != first->max_power)
break;
}
scan.band = first->band;
if (priv->scan.req->no_cck)
scan.maxTransmitRate = WSM_TRANSMIT_RATE_6;
else
scan.maxTransmitRate = WSM_TRANSMIT_RATE_1;
/* TODO: Is it optimal? */
scan.numOfProbeRequests =
(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) ? 0 : 2;
scan.numOfSSIDs = priv->scan.n_ssids;
scan.ssids = &priv->scan.ssids[0];
scan.numOfChannels = it - priv->scan.curr;
scan.probeDelay = 100;
/* It is not stated in WSM specification, however
* FW team says that driver may not use FG scan
* when joined. */
if (priv->join_status == CW1200_JOIN_STATUS_STA) {
scan.scanType = WSM_SCAN_TYPE_BACKGROUND;
scan.scanFlags = WSM_SCAN_FLAG_FORCE_BACKGROUND;
}
scan.ch = kzalloc(
sizeof(struct wsm_scan_ch[it - priv->scan.curr]),
GFP_KERNEL);
if (!scan.ch) {
priv->scan.status = -ENOMEM;
goto fail;
}
for (i = 0; i < scan.numOfChannels; ++i) {
scan.ch[i].number = priv->scan.curr[i]->hw_value;
if (priv->scan.curr[i]->flags & IEEE80211_CHAN_PASSIVE_SCAN) {
scan.ch[i].minChannelTime = 50;
scan.ch[i].maxChannelTime = 100;
}
else {
scan.ch[i].minChannelTime = 10;
scan.ch[i].maxChannelTime = 25;
}
}
if (!(first->flags & IEEE80211_CHAN_PASSIVE_SCAN) &&
priv->scan.output_power != first->max_power) {
priv->scan.output_power = first->max_power;
WARN_ON(wsm_set_output_power(priv,
priv->scan.output_power * 10));
}
priv->scan.status = cw1200_scan_start(priv, &scan);
kfree(scan.ch);
if (priv->scan.status)
goto fail;
priv->scan.curr = it;
}
mutex_unlock(&priv->conf_mutex);
return;
fail:
priv->scan.curr = priv->scan.end;
mutex_unlock(&priv->conf_mutex);
queue_work(priv->workqueue, &priv->scan.work);
return;
}
