void
load_platform_drivers(void)
{
dev_info_t *dip; /* dip of the isa driver */
/*
* Install power driver which handles the power button.
*/
if (i_ddi_attach_hw_nodes("power") != DDI_SUCCESS)
cmn_err(CE_WARN, "Failed to install \"power\" driver.");
(void) ddi_hold_driver(ddi_name_to_major("power"));
/*
* It is OK to return error because 'us' driver is not available
* in all clusters (e.g. missing in Core cluster).
*/
(void) i_ddi_attach_hw_nodes("us");
if (i_ddi_attach_hw_nodes("grbeep") != DDI_SUCCESS)
cmn_err(CE_WARN, "Failed to install \"beep\" driver.");
/*
* mc-us3i must stay loaded for plat_get_mem_unum()
*/
if (i_ddi_attach_hw_nodes("mc-us3i") != DDI_SUCCESS)
cmn_err(CE_WARN, "mc-us3i driver failed to install");
(void) ddi_hold_driver(ddi_name_to_major("mc-us3i"));
/*
* Install Isa driver. This is required for the southbridge IDE
* workaround - to reset the IDE channel during IDE bus reset.
* Panic the system in case ISA driver could not be loaded or
* any problem in accessing its pci config space. Since the register
* to reset the channel for IDE is in ISA config space!.
*/
dip = e_ddi_hold_devi_by_path(ENCHILADA_ISA_PATHNAME, 0);
if (dip == NULL) {
cmn_err(CE_PANIC, "Could not install the isa driver\n");
return;
}
if (pci_config_setup(dip, &isa_handle) != DDI_SUCCESS) {
cmn_err(CE_PANIC, "Could not get the config space of isa\n");
return;
}
}
/*
* Validate a major number and also verify if
* it is a STREAMS device.
* Return values: 0 if a valid STREAMS dev
* error code otherwise
*/
static int
valid_major(major_t major)
{
int ret = 0;
if (etoimajor(major) == -1)
return (EINVAL);
/*
* attempt to load the driver 'major' and verify that
* it is a STREAMS driver.
*/
if (ddi_hold_driver(major) == NULL)
return (EINVAL);
if (!STREAMSTAB(major))
ret = ENOSTR;
ddi_rele_driver(major);
return (ret);
}
void
load_platform_drivers(void)
{
dev_info_t *dip; /* dip of the isa driver */
/*
* Install 'us' driver.
*/
(void) i_ddi_attach_hw_nodes("us");
/*
* mc-us3i must stay loaded for plat_get_mem_unum()
*/
if (i_ddi_attach_hw_nodes("mc-us3i") != DDI_SUCCESS)
cmn_err(CE_WARN, "mc-us3i driver failed to install");
(void) ddi_hold_driver(ddi_name_to_major("mc-us3i"));
/*
* Install Isa driver. This is required for the southbridge IDE
* workaround - to reset the IDE channel during IDE bus reset.
* Panic the system in case ISA driver could not be loaded or
* any problem in accessing its pci config space. Since the register
* to reset the channel for IDE is in ISA config space!.
*/
dip = e_ddi_hold_devi_by_path(SCHUMACHER_ISA_PATHNAME, 0);
if (dip == NULL) {
cmn_err(CE_PANIC, "Could not install the isa driver\n");
return;
}
if (pci_config_setup(dip, &isa_handle) != DDI_SUCCESS) {
cmn_err(CE_PANIC, "Could not get the config space of isa\n");
return;
}
}
void
load_platform_drivers(void)
{
/*
* It is OK to return error because 'us' driver is not available
* in all clusters (e.g. missing in Core cluster).
*/
(void) i_ddi_attach_hw_nodes("us");
/*
* mc-us3i must stay loaded for plat_get_mem_unum()
*/
if (i_ddi_attach_hw_nodes("mc-us3i") != DDI_SUCCESS)
cmn_err(CE_WARN, "mc-us3i driver failed to install");
(void) ddi_hold_driver(ddi_name_to_major("mc-us3i"));
/*
* load the power button driver
*/
if (i_ddi_attach_hw_nodes("power") != DDI_SUCCESS)
cmn_err(CE_WARN, "power button driver failed to install");
(void) ddi_hold_driver(ddi_name_to_major("power"));
/*
* load the GPIO driver for the ALOM reset and watchdog lines
*/
if (i_ddi_attach_hw_nodes("pmugpio") != DDI_SUCCESS)
cmn_err(CE_WARN, "pmugpio failed to install");
else {
extern int watchdog_enable, watchdog_available;
extern int disable_watchdog_on_exit;
/*
* Disable an active h/w watchdog timer upon exit to OBP.
*/
disable_watchdog_on_exit = 1;
watchdog_enable = 1;
watchdog_available = 1;
}
(void) ddi_hold_driver(ddi_name_to_major("pmugpio"));
/*
* Figure out which mi2cv dip is shared with OBP for the nvram
* device, so the lock can be acquired.
*/
shared_mi2cv_dip = e_ddi_hold_devi_by_path(SHARED_MI2CV_PATH, 0);
/*
* Load the environmentals driver (rmclomv)
*
* We need this driver to handle events from the RMC when state
* changes occur in the environmental data.
*/
if (i_ddi_attach_hw_nodes("rmc_comm") != DDI_SUCCESS) {
cmn_err(CE_WARN, "rmc_comm failed to install");
} else {
(void) ddi_hold_driver(ddi_name_to_major("rmc_comm"));
if (e_ddi_hold_devi_by_path(RMCLOMV_PATHNAME, 0) == NULL) {
cmn_err(CE_WARN, "Could not install rmclomv driver\n");
}
}
/*
* These two dummy functions are loaded over the original
* todm5823 set and clear_power_alarm functions. On Boston,
* these functionalities are not supported.
* The load_platform_drivers(void) is called from post_startup()
* which is after all the initialization of the tod module is
* finished, then we replace 2 of the tod_ops function pointers
* with our dummy version.
*/
tod_ops.tod_set_power_alarm = dummy_todm5823_set_power_alarm;
tod_ops.tod_clear_power_alarm = dummy_todm5823_clear_power_alarm;
/*
* create a handle to the rmc_comm_request_nowait() function
* inside the rmc_comm module.
*
* The Seattle/Boston todm5823 driver will use this handle to
* use the rmc_comm_request_nowait() function to send time/date
* updates to ALOM.
*/
rmc_req_now = (int (*)(rmc_comm_msg_t *, uint8_t))
modgetsymvalue("rmc_comm_request_nowait", 0);
}
