Exemplo n.º 1
0
int
ddi_intr_hilevel(dev_info_t *dip, uint_t inumber)
{
	ddi_intr_handle_t	hdl;
	ddi_intr_handle_t	*hdl_p;
	size_t			hdl_sz = 0;
	int			actual, ret;
	uint_t			high_pri, pri;

	DDI_INTR_APIDBG((CE_CONT, "ddi_intr_hilevel: name=%s%d dip=0x%p "
	    "inum=0x%x\n", ddi_driver_name(dip), ddi_get_instance(dip),
	    (void *)dip, inumber));

	/*
	 * The device driver may have already registed with the
	 * framework. If so, first try to get the existing interrupt handle
	 * for that given inumber and use that handle.
	 */
	if ((hdl = i_ddi_get_intr_handle(dip, inumber)) == NULL) {
		hdl_sz = sizeof (ddi_intr_handle_t) * (inumber + 1);
		hdl_p = kmem_zalloc(hdl_sz, KM_SLEEP);
		if ((ret = ddi_intr_alloc(dip, hdl_p, DDI_INTR_TYPE_FIXED,
		    inumber, 1, &actual,
		    DDI_INTR_ALLOC_NORMAL)) != DDI_SUCCESS) {
			DDI_INTR_APIDBG((CE_CONT, "ddi_intr_hilevel: "
			    "ddi_intr_alloc failed, ret 0x%x\n", ret));
			kmem_free(hdl_p, hdl_sz);
			return (0);
		}
		hdl = hdl_p[inumber];
	}

	if ((ret = ddi_intr_get_pri(hdl, &pri)) != DDI_SUCCESS) {
		DDI_INTR_APIDBG((CE_CONT, "ddi_intr_hilevel: "
		    "ddi_intr_get_pri failed, ret 0x%x\n", ret));
		(void) ddi_intr_free(hdl);
		if (hdl_sz)
			kmem_free(hdl_p, hdl_sz);
		return (0);
	}

	high_pri = ddi_intr_get_hilevel_pri();

	DDI_INTR_APIDBG((CE_CONT, "ddi_intr_hilevel: pri = %x, "
	    "high_pri = %x\n", pri, high_pri));

	/* Free the handle allocated here only if no existing handle exists */
	if (hdl_sz) {
		(void) ddi_intr_free(hdl);
		kmem_free(hdl_p, hdl_sz);
	}

	return (pri >= high_pri);
}
Exemplo n.º 2
0
static int
virtio_fixed_intr_setup(virtionet_state_t *sp, ddi_intr_handler_t inthandler)
{
	int			rc;
	int			nintr;
	uint_t			pri;

	rc = ddi_intr_get_nintrs(sp->dip, DDI_INTR_TYPE_FIXED, &nintr);
	if (rc != DDI_SUCCESS) {
		return (DDI_FAILURE);
	}

	ASSERT(nintr == 1);

	rc = ddi_intr_alloc(sp->dip, &sp->ihandle, DDI_INTR_TYPE_FIXED, 0, 1,
	    &nintr, DDI_INTR_ALLOC_NORMAL);
	if (rc != DDI_SUCCESS) {
		return (DDI_FAILURE);
	}

	ASSERT(nintr == 1);

	rc = ddi_intr_get_pri(sp->ihandle, &pri);
	if (rc != DDI_SUCCESS) {
		(void) ddi_intr_free(sp->ihandle);
		return (DDI_FAILURE);
	}

	/* Test for high level mutex */
	if (pri >= ddi_intr_get_hilevel_pri()) {
		cmn_err(CE_WARN, "Hi level interrupt not supported");
		(void) ddi_intr_free(sp->ihandle);
		return (DDI_FAILURE);
	}

	rc = ddi_intr_add_handler(sp->ihandle, inthandler, sp, NULL);
	if (rc != DDI_SUCCESS) {
		(void) ddi_intr_free(sp->ihandle);
		return (DDI_FAILURE);
	}

	rc = ddi_intr_enable(sp->ihandle);
	if (rc != DDI_SUCCESS) {
		(void) ddi_intr_remove_handler(sp->ihandle);
		(void) ddi_intr_free(sp->ihandle);
		return (DDI_FAILURE);
	}
	return (DDI_SUCCESS);
}
Exemplo n.º 3
0
/* ARGSUSED */
void
ddi_remove_intr(dev_info_t *dip, uint_t inum, ddi_iblock_cookie_t iblock_cookie)
{
	ddi_intr_handle_t	hdl;
	int			ret;

	DDI_INTR_APIDBG((CE_CONT, "ddi_remove_intr: name=%s%d dip=0x%p "
	    "inum=0x%x\n", ddi_driver_name(dip), ddi_get_instance(dip),
	    (void *)dip, inum));

	if ((hdl = i_ddi_get_intr_handle(dip, inum)) == NULL) {
		DDI_INTR_APIDBG((CE_CONT, "ddi_remove_intr: no handle "
		    "found\n"));
		return;
	}

	if ((ret = ddi_intr_disable(hdl)) != DDI_SUCCESS) {
		DDI_INTR_APIDBG((CE_CONT, "ddi_remove_intr: "
		    "ddi_intr_disable failed, ret 0x%x\n", ret));
		return;
	}

	if ((ret = ddi_intr_remove_handler(hdl)) != DDI_SUCCESS) {
		DDI_INTR_APIDBG((CE_CONT, "ddi_remove_intr: "
		    "ddi_intr_remove_handler failed, ret 0x%x\n", ret));
		return;
	}

	if ((ret = ddi_intr_free(hdl)) != DDI_SUCCESS) {
		DDI_INTR_APIDBG((CE_CONT, "ddi_remove_intr: "
		    "ddi_intr_free failed, ret 0x%x\n", ret));
		return;
	}
}
Exemplo n.º 4
0
static int
virtio_intr_teardown(virtionet_state_t *sp)
{
	int			rc;

	rc = ddi_intr_disable(sp->ihandle);
	rc = ddi_intr_remove_handler(sp->ihandle);
	rc = ddi_intr_free(sp->ihandle);
	return (DDI_SUCCESS);
}
Exemplo n.º 5
0
/**
 * Removes IRQ for VMMDev.
 *
 * @param   pDip     Pointer to the device info structure.
 */
static void VBoxGuestSolarisRemoveIRQ(dev_info_t *pDip)
{
    LogFlow((DEVICE_NAME "::RemoveIRQ:\n"));

    for (int i = 0; i < g_cIntrAllocated; i++)
    {
        int rc = ddi_intr_disable(g_pIntr[i]);
        if (rc == DDI_SUCCESS)
        {
            rc = ddi_intr_remove_handler(g_pIntr[i]);
            if (rc == DDI_SUCCESS)
                ddi_intr_free(g_pIntr[i]);
        }
    }
    RTMemFree(g_pIntr);
    mutex_destroy(&g_IrqMtx);
}
Exemplo n.º 6
0
int
efe_detach(dev_info_t *dip, ddi_detach_cmd_t cmd)
{
	efe_t *efep = ddi_get_driver_private(dip);

	switch (cmd) {
	case DDI_DETACH:
		break;

	case DDI_SUSPEND:
		return (efe_suspend(efep));

	default:
		return (DDI_FAILURE);
	}

	if (mac_unregister(efep->efe_mh) != 0) {
		efe_error(dip, "unable to unregister from mac!");
		return (DDI_FAILURE);
	}

	mii_free(efep->efe_miih);

	(void) ddi_intr_disable(efep->efe_intrh);
	(void) ddi_intr_remove_handler(efep->efe_intrh);
	(void) ddi_intr_free(efep->efe_intrh);

	mutex_destroy(&efep->efe_txlock);
	mutex_destroy(&efep->efe_intrlock);

	if (efep->efe_tx_ring != NULL) {
		efe_ring_free(&efep->efe_tx_ring);
	}
	if (efep->efe_rx_ring != NULL) {
		efe_ring_free(&efep->efe_rx_ring);
	}

	ddi_regs_map_free(&efep->efe_regs_acch);

	kmem_free(efep, sizeof (efe_t));

	return (DDI_SUCCESS);
}
Exemplo n.º 7
0
/**
 * Removes IRQ for VMMDev.
 *
 * @param   pDip     Pointer to the device info structure.
 */
static void vgdrvSolarisRemoveIRQ(dev_info_t *pDip)
{
    LogFlow(("vgdrvSolarisRemoveIRQ:\n"));

    int rc = ddi_intr_disable(g_pahIntrs[0]);
    if (rc == DDI_SUCCESS)
    {
        rc = ddi_intr_remove_handler(g_pahIntrs[0]);
        if (rc == DDI_SUCCESS)
            ddi_intr_free(g_pahIntrs[0]);
    }

    if (g_fSoftIntRegistered)
    {
        ddi_intr_remove_softint(g_hSoftIntr);
        mutex_destroy(&g_HighLevelIrqMtx);
        g_fSoftIntRegistered = false;
    }

    mutex_destroy(&g_IrqMtx);
    RTMemFree(g_pahIntrs);
}
Exemplo n.º 8
0
/*
 * Autoconfiguration entry points.
 */
int
efe_attach(dev_info_t *dip, ddi_attach_cmd_t cmd)
{
	ddi_acc_handle_t pci;
	int types;
	int count;
	int actual;
	uint_t pri;
	efe_t *efep;
	mac_register_t *macp;

	switch (cmd) {
	case DDI_ATTACH:
		break;

	case DDI_RESUME:
		efep = ddi_get_driver_private(dip);
		return (efe_resume(efep));

	default:
		return (DDI_FAILURE);
	}

	/*
	 * PCI configuration.
	 */
	if (pci_config_setup(dip, &pci) != DDI_SUCCESS) {
		efe_error(dip, "unable to setup PCI configuration!");
		return (DDI_FAILURE);
	}

	pci_config_put16(pci, PCI_CONF_COMM,
	    pci_config_get16(pci, PCI_CONF_COMM) | PCI_COMM_MAE | PCI_COMM_ME);

	pci_config_teardown(&pci);

	if (ddi_intr_get_supported_types(dip, &types)
	    != DDI_SUCCESS || !(types & DDI_INTR_TYPE_FIXED)) {
		efe_error(dip, "fixed interrupts not supported!");
		return (DDI_FAILURE);
	}

	if (ddi_intr_get_nintrs(dip, DDI_INTR_TYPE_FIXED, &count)
	    != DDI_SUCCESS || count != 1) {
		efe_error(dip, "no fixed interrupts available!");
		return (DDI_FAILURE);
	}

	/*
	 * Initialize soft state.
	 */
	efep = kmem_zalloc(sizeof (efe_t), KM_SLEEP);
	ddi_set_driver_private(dip, efep);

	efep->efe_dip = dip;

	if (ddi_regs_map_setup(dip, 1, (caddr_t *)&efep->efe_regs, 0, 0,
	    &efe_regs_acc_attr, &efep->efe_regs_acch) != DDI_SUCCESS) {
		efe_error(dip, "unable to setup register mapping!");
		goto failure;
	}

	efep->efe_rx_ring = efe_ring_alloc(efep->efe_dip, RXDESCL);
	if (efep->efe_rx_ring == NULL) {
		efe_error(efep->efe_dip, "unable to allocate rx ring!");
		goto failure;
	}

	efep->efe_tx_ring = efe_ring_alloc(efep->efe_dip, TXDESCL);
	if (efep->efe_tx_ring == NULL) {
		efe_error(efep->efe_dip, "unable to allocate tx ring!");
		goto failure;
	}

	if (ddi_intr_alloc(dip, &efep->efe_intrh, DDI_INTR_TYPE_FIXED, 0,
	    count, &actual, DDI_INTR_ALLOC_STRICT) != DDI_SUCCESS ||
	    actual != count) {
		efe_error(dip, "unable to allocate fixed interrupt!");
		goto failure;
	}

	if (ddi_intr_get_pri(efep->efe_intrh, &pri) != DDI_SUCCESS ||
	    pri >= ddi_intr_get_hilevel_pri()) {
		efe_error(dip, "unable to get valid interrupt priority!");
		goto failure;
	}

	mutex_init(&efep->efe_intrlock, NULL, MUTEX_DRIVER,
	    DDI_INTR_PRI(pri));

	mutex_init(&efep->efe_txlock, NULL, MUTEX_DRIVER,
	    DDI_INTR_PRI(pri));

	/*
	 * Initialize device.
	 */
	mutex_enter(&efep->efe_intrlock);
	mutex_enter(&efep->efe_txlock);

	efe_reset(efep);

	mutex_exit(&efep->efe_txlock);
	mutex_exit(&efep->efe_intrlock);

	/* Use factory address as default */
	efe_getaddr(efep, efep->efe_macaddr);

	/*
	 * Enable the ISR.
	 */
	if (ddi_intr_add_handler(efep->efe_intrh, efe_intr, efep, NULL)
	    != DDI_SUCCESS) {
		efe_error(dip, "unable to add interrupt handler!");
		goto failure;
	}

	if (ddi_intr_enable(efep->efe_intrh) != DDI_SUCCESS) {
		efe_error(dip, "unable to enable interrupt!");
		goto failure;
	}

	/*
	 * Allocate MII resources.
	 */
	if ((efep->efe_miih = mii_alloc(efep, dip, &efe_mii_ops)) == NULL) {
		efe_error(dip, "unable to allocate mii resources!");
		goto failure;
	}

	/*
	 * Allocate MAC resources.
	 */
	if ((macp = mac_alloc(MAC_VERSION)) == NULL) {
		efe_error(dip, "unable to allocate mac resources!");
		goto failure;
	}

	macp->m_type_ident = MAC_PLUGIN_IDENT_ETHER;
	macp->m_driver = efep;
	macp->m_dip = dip;
	macp->m_src_addr = efep->efe_macaddr;
	macp->m_callbacks = &efe_m_callbacks;
	macp->m_min_sdu = 0;
	macp->m_max_sdu = ETHERMTU;
	macp->m_margin = VLAN_TAGSZ;

	if (mac_register(macp, &efep->efe_mh) != 0) {
		efe_error(dip, "unable to register with mac!");
		goto failure;
	}
	mac_free(macp);

	ddi_report_dev(dip);

	return (DDI_SUCCESS);

failure:
	if (macp != NULL) {
		mac_free(macp);
	}

	if (efep->efe_miih != NULL) {
		mii_free(efep->efe_miih);
	}

	if (efep->efe_intrh != NULL) {
		(void) ddi_intr_disable(efep->efe_intrh);
		(void) ddi_intr_remove_handler(efep->efe_intrh);
		(void) ddi_intr_free(efep->efe_intrh);
	}

	mutex_destroy(&efep->efe_txlock);
	mutex_destroy(&efep->efe_intrlock);

	if (efep->efe_tx_ring != NULL) {
		efe_ring_free(&efep->efe_tx_ring);
	}
	if (efep->efe_rx_ring != NULL) {
		efe_ring_free(&efep->efe_rx_ring);
	}

	if (efep->efe_regs_acch != NULL) {
		ddi_regs_map_free(&efep->efe_regs_acch);
	}

	kmem_free(efep, sizeof (efe_t));

	return (DDI_FAILURE);
}
Exemplo n.º 9
0
/*
 * config_handler and vq_handlers may be allocated on stack.
 * Take precautions not to loose them.
 */
static int
virtio_register_intx(struct virtio_softc *sc,
    struct virtio_int_handler *config_handler,
    struct virtio_int_handler vq_handlers[])
{
	int vq_handler_count;
	int config_handler_count = 0;
	int actual;
	struct virtio_handler_container *vhc;
	int ret = DDI_FAILURE;

	/* Walk the handler table to get the number of handlers. */
	for (vq_handler_count = 0;
	    vq_handlers && vq_handlers[vq_handler_count].vh_func;
	    vq_handler_count++)
		;

	if (config_handler != NULL)
		config_handler_count = 1;

	vhc = kmem_zalloc(sizeof (struct virtio_handler_container) +
	    sizeof (struct virtio_int_handler) * vq_handler_count, KM_SLEEP);

	vhc->nhandlers = vq_handler_count;
	(void) memcpy(vhc->vq_handlers, vq_handlers,
	    sizeof (struct virtio_int_handler) * vq_handler_count);

	if (config_handler != NULL) {
		(void) memcpy(&vhc->config_handler, config_handler,
		    sizeof (struct virtio_int_handler));
	}

	/* Just a single entry for a single interrupt. */
	sc->sc_intr_htable = kmem_zalloc(sizeof (ddi_intr_handle_t), KM_SLEEP);

	ret = ddi_intr_alloc(sc->sc_dev, sc->sc_intr_htable,
	    DDI_INTR_TYPE_FIXED, 0, 1, &actual, DDI_INTR_ALLOC_NORMAL);
	if (ret != DDI_SUCCESS) {
		dev_err(sc->sc_dev, CE_WARN,
		    "Failed to allocate a fixed interrupt: %d", ret);
		goto out_int_alloc;
	}

	ASSERT(actual == 1);
	sc->sc_intr_num = 1;

	ret = ddi_intr_get_pri(sc->sc_intr_htable[0], &sc->sc_intr_prio);
	if (ret != DDI_SUCCESS) {
		dev_err(sc->sc_dev, CE_WARN, "ddi_intr_get_pri failed");
		goto out_prio;
	}

	ret = ddi_intr_add_handler(sc->sc_intr_htable[0],
	    virtio_intx_dispatch, sc, vhc);
	if (ret != DDI_SUCCESS) {
		dev_err(sc->sc_dev, CE_WARN, "ddi_intr_add_handler failed");
		goto out_add_handlers;
	}

	/* We know we are not using MSI, so set the config offset. */
	sc->sc_config_offset = VIRTIO_CONFIG_DEVICE_CONFIG_NOMSI;

	return (DDI_SUCCESS);

out_add_handlers:
out_prio:
	(void) ddi_intr_free(sc->sc_intr_htable[0]);
out_int_alloc:
	kmem_free(sc->sc_intr_htable, sizeof (ddi_intr_handle_t));
	kmem_free(vhc, sizeof (struct virtio_int_handler) *
	    (vq_handler_count + config_handler_count));
	return (ret);
}
Exemplo n.º 10
0
static int
virtio_register_msi(struct virtio_softc *sc,
    struct virtio_int_handler *config_handler,
    struct virtio_int_handler vq_handlers[], int intr_types)
{
	int count, actual;
	int int_type;
	int i;
	int handler_count;
	int ret;

	/* If both MSI and MSI-x are reported, prefer MSI-x. */
	int_type = DDI_INTR_TYPE_MSI;
	if (intr_types & DDI_INTR_TYPE_MSIX)
		int_type = DDI_INTR_TYPE_MSIX;

	/* Walk the handler table to get the number of handlers. */
	for (handler_count = 0;
	    vq_handlers && vq_handlers[handler_count].vh_func;
	    handler_count++)
		;

	/* +1 if there is a config change handler. */
	if (config_handler != NULL)
		handler_count++;

	/* Number of MSIs supported by the device. */
	ret = ddi_intr_get_nintrs(sc->sc_dev, int_type, &count);
	if (ret != DDI_SUCCESS) {
		dev_err(sc->sc_dev, CE_WARN, "ddi_intr_get_nintrs failed");
		return (ret);
	}

	/*
	 * Those who try to register more handlers then the device
	 * supports shall suffer.
	 */
	ASSERT(handler_count <= count);

	sc->sc_intr_htable = kmem_zalloc(sizeof (ddi_intr_handle_t) *
	    handler_count, KM_SLEEP);

	ret = ddi_intr_alloc(sc->sc_dev, sc->sc_intr_htable, int_type, 0,
	    handler_count, &actual, DDI_INTR_ALLOC_NORMAL);
	if (ret != DDI_SUCCESS) {
		dev_err(sc->sc_dev, CE_WARN, "Failed to allocate MSI: %d", ret);
		goto out_msi_alloc;
	}

	if (actual != handler_count) {
		dev_err(sc->sc_dev, CE_WARN,
		    "Not enough MSI available: need %d, available %d",
		    handler_count, actual);
		goto out_msi_available;
	}

	sc->sc_intr_num = handler_count;
	sc->sc_intr_config = B_FALSE;
	if (config_handler != NULL) {
		sc->sc_intr_config = B_TRUE;
	}

	/* Assume they are all same priority */
	ret = ddi_intr_get_pri(sc->sc_intr_htable[0], &sc->sc_intr_prio);
	if (ret != DDI_SUCCESS) {
		dev_err(sc->sc_dev, CE_WARN, "ddi_intr_get_pri failed");
		goto out_msi_prio;
	}

	/* Add the vq handlers */
	for (i = 0; vq_handlers[i].vh_func; i++) {
		ret = ddi_intr_add_handler(sc->sc_intr_htable[i],
		    vq_handlers[i].vh_func, sc, vq_handlers[i].vh_priv);
		if (ret != DDI_SUCCESS) {
			dev_err(sc->sc_dev, CE_WARN,
			    "ddi_intr_add_handler failed");
			/* Remove the handlers that succeeded. */
			while (--i >= 0) {
				(void) ddi_intr_remove_handler(
				    sc->sc_intr_htable[i]);
			}
			goto out_add_handlers;
		}
	}

	/* Don't forget the config handler */
	if (config_handler != NULL) {
		ret = ddi_intr_add_handler(sc->sc_intr_htable[i],
		    config_handler->vh_func, sc, config_handler->vh_priv);
		if (ret != DDI_SUCCESS) {
			dev_err(sc->sc_dev, CE_WARN,
			    "ddi_intr_add_handler failed");
			/* Remove the handlers that succeeded. */
			while (--i >= 0) {
				(void) ddi_intr_remove_handler(
				    sc->sc_intr_htable[i]);
			}
			goto out_add_handlers;
		}
	}

	/* We know we are using MSI, so set the config offset. */
	sc->sc_config_offset = VIRTIO_CONFIG_DEVICE_CONFIG_MSI;

	ret = ddi_intr_get_cap(sc->sc_intr_htable[0], &sc->sc_intr_cap);
	/* Just in case. */
	if (ret != DDI_SUCCESS)
		sc->sc_intr_cap = 0;

out_add_handlers:
out_msi_prio:
out_msi_available:
	for (i = 0; i < actual; i++)
		(void) ddi_intr_free(sc->sc_intr_htable[i]);
out_msi_alloc:
	kmem_free(sc->sc_intr_htable, sizeof (ddi_intr_handle_t) * count);

	return (ret);
}
Exemplo n.º 11
0
void
virtio_release_ints(struct virtio_softc *sc)
{
	int i;
	int ret;

	/* We were running with MSI, unbind them. */
	if (sc->sc_config_offset == VIRTIO_CONFIG_DEVICE_CONFIG_MSI) {
		/* Unbind all vqs */
		for (i = 0; i < sc->sc_nvqs; i++) {
			ddi_put16(sc->sc_ioh,
			    /* LINTED E_BAD_PTR_CAST_ALIGN */
			    (uint16_t *)(sc->sc_io_addr +
			    VIRTIO_CONFIG_QUEUE_SELECT), i);

			ddi_put16(sc->sc_ioh,
			    /* LINTED E_BAD_PTR_CAST_ALIGN */
			    (uint16_t *)(sc->sc_io_addr +
			    VIRTIO_CONFIG_QUEUE_VECTOR),
			    VIRTIO_MSI_NO_VECTOR);
		}
		/* And the config */
		/* LINTED E_BAD_PTR_CAST_ALIGN */
		ddi_put16(sc->sc_ioh, (uint16_t *)(sc->sc_io_addr +
		    VIRTIO_CONFIG_CONFIG_VECTOR),
		    VIRTIO_MSI_NO_VECTOR);

	}

	/* Disable the iterrupts. Either the whole block, or one by one. */
	if (sc->sc_intr_cap & DDI_INTR_FLAG_BLOCK) {
		ret = ddi_intr_block_disable(sc->sc_intr_htable,
		    sc->sc_intr_num);
		if (ret != DDI_SUCCESS) {
			dev_err(sc->sc_dev, CE_WARN,
			    "Failed to disable MSIs, won't be able to "
			    "reuse next time");
		}
	} else {
		for (i = 0; i < sc->sc_intr_num; i++) {
			ret = ddi_intr_disable(sc->sc_intr_htable[i]);
			if (ret != DDI_SUCCESS) {
				dev_err(sc->sc_dev, CE_WARN,
				    "Failed to disable interrupt %d, "
				    "won't be able to reuse", i);
			}
		}
	}


	for (i = 0; i < sc->sc_intr_num; i++) {
		(void) ddi_intr_remove_handler(sc->sc_intr_htable[i]);
	}

	for (i = 0; i < sc->sc_intr_num; i++)
		(void) ddi_intr_free(sc->sc_intr_htable[i]);

	kmem_free(sc->sc_intr_htable, sizeof (ddi_intr_handle_t) *
	    sc->sc_intr_num);

	/* After disabling interrupts, the config offset is non-MSI. */
	sc->sc_config_offset = VIRTIO_CONFIG_DEVICE_CONFIG_NOMSI;
}
Exemplo n.º 12
0
/**
 * Sets IRQ for VMMDev.
 *
 * @returns Solaris error code.
 * @param   pDip     Pointer to the device info structure.
 */
static int VBoxGuestSolarisAddIRQ(dev_info_t *pDip)
{
    LogFlow((DEVICE_NAME "::AddIRQ: pDip=%p\n", pDip));

    int IntrType = 0;
    int rc = ddi_intr_get_supported_types(pDip, &IntrType);
    if (rc == DDI_SUCCESS)
    {
        /* We won't need to bother about MSIs. */
        if (IntrType & DDI_INTR_TYPE_FIXED)
        {
            int IntrCount = 0;
            rc = ddi_intr_get_nintrs(pDip, IntrType, &IntrCount);
            if (   rc == DDI_SUCCESS
                && IntrCount > 0)
            {
                int IntrAvail = 0;
                rc = ddi_intr_get_navail(pDip, IntrType, &IntrAvail);
                if (   rc == DDI_SUCCESS
                    && IntrAvail > 0)
                {
                    /* Allocated kernel memory for the interrupt handles. The allocation size is stored internally. */
                    g_pIntr = RTMemAlloc(IntrCount * sizeof(ddi_intr_handle_t));
                    if (g_pIntr)
                    {
                        int IntrAllocated;
                        rc = ddi_intr_alloc(pDip, g_pIntr, IntrType, 0, IntrCount, &IntrAllocated, DDI_INTR_ALLOC_NORMAL);
                        if (   rc == DDI_SUCCESS
                            && IntrAllocated > 0)
                        {
                            g_cIntrAllocated = IntrAllocated;
                            uint_t uIntrPriority;
                            rc = ddi_intr_get_pri(g_pIntr[0], &uIntrPriority);
                            if (rc == DDI_SUCCESS)
                            {
                                /* Initialize the mutex. */
                                mutex_init(&g_IrqMtx, NULL, MUTEX_DRIVER, DDI_INTR_PRI(uIntrPriority));

                                /* Assign interrupt handler functions and enable interrupts. */
                                for (int i = 0; i < IntrAllocated; i++)
                                {
                                    rc = ddi_intr_add_handler(g_pIntr[i], (ddi_intr_handler_t *)VBoxGuestSolarisISR,
                                                            NULL /* No Private Data */, NULL);
                                    if (rc == DDI_SUCCESS)
                                        rc = ddi_intr_enable(g_pIntr[i]);
                                    if (rc != DDI_SUCCESS)
                                    {
                                        /* Changing local IntrAllocated to hold so-far allocated handles for freeing. */
                                        IntrAllocated = i;
                                        break;
                                    }
                                }
                                if (rc == DDI_SUCCESS)
                                    return rc;

                                /* Remove any assigned handlers */
                                LogRel((DEVICE_NAME ":failed to assign IRQs allocated=%d\n", IntrAllocated));
                                for (int x = 0; x < IntrAllocated; x++)
                                    ddi_intr_remove_handler(g_pIntr[x]);
                            }
                            else
                                LogRel((DEVICE_NAME "::AddIRQ: failed to get priority of interrupt. rc=%d\n", rc));

                            /* Remove allocated IRQs, too bad we can free only one handle at a time. */
                            for (int k = 0; k < g_cIntrAllocated; k++)
                                ddi_intr_free(g_pIntr[k]);
                        }
                        else
                            LogRel((DEVICE_NAME "::AddIRQ: failed to allocated IRQs. count=%d\n", IntrCount));
                        RTMemFree(g_pIntr);
                    }
                    else
                        LogRel((DEVICE_NAME "::AddIRQ: failed to allocated IRQs. count=%d\n", IntrCount));
                }
                else
                    LogRel((DEVICE_NAME "::AddIRQ: failed to get or insufficient available IRQs. rc=%d IntrAvail=%d\n", rc, IntrAvail));
            }
            else
                LogRel((DEVICE_NAME "::AddIRQ: failed to get or insufficient number of IRQs. rc=%d IntrCount=%d\n", rc, IntrCount));
        }
        else
            LogRel((DEVICE_NAME "::AddIRQ: invalid irq type. IntrType=%#x\n", IntrType));
    }
    else
        LogRel((DEVICE_NAME "::AddIRQ: failed to get supported interrupt types\n"));
    return rc;
}
Exemplo n.º 13
0
/**
 * Sets IRQ for VMMDev.
 *
 * @returns Solaris error code.
 * @param   pDip     Pointer to the device info structure.
 */
static int vgdrvSolarisAddIRQ(dev_info_t *pDip)
{
    LogFlow(("vgdrvSolarisAddIRQ: pDip=%p\n", pDip));

    /* Get the types of interrupt supported for this hardware. */
    int fIntrType = 0;
    int rc = ddi_intr_get_supported_types(pDip, &fIntrType);
    if (rc == DDI_SUCCESS)
    {
        /* We only support fixed interrupts at this point, not MSIs. */
        if (fIntrType & DDI_INTR_TYPE_FIXED)
        {
            /* Verify the number of interrupts supported by this device. There can only be one fixed interrupt. */
            int cIntrCount = 0;
            rc = ddi_intr_get_nintrs(pDip, fIntrType, &cIntrCount);
            if (   rc == DDI_SUCCESS
                && cIntrCount == 1)
            {
                /* Allocated kernel memory for the interrupt handle. The allocation size is stored internally. */
                g_pahIntrs = RTMemAllocZ(cIntrCount * sizeof(ddi_intr_handle_t));
                if (g_pahIntrs)
                {
                    /* Allocate the interrupt for this device and verify the allocation. */
                    int cIntrAllocated;
                    rc = ddi_intr_alloc(pDip, g_pahIntrs, fIntrType, 0 /* interrupt number */, cIntrCount, &cIntrAllocated,
                                        DDI_INTR_ALLOC_NORMAL);
                    if (   rc == DDI_SUCCESS
                        && cIntrAllocated == 1)
                    {
                        /* Get the interrupt priority assigned by the system. */
                        uint_t uIntrPriority;
                        rc = ddi_intr_get_pri(g_pahIntrs[0], &uIntrPriority);
                        if (rc == DDI_SUCCESS)
                        {
                            /* Check if the interrupt priority is scheduler level or above, if so we need to use a high-level
                               and low-level interrupt handlers with corresponding mutexes. */
                            cmn_err(CE_CONT, "!vboxguest: uIntrPriority=%d hilevel_pri=%d\n", uIntrPriority, ddi_intr_get_hilevel_pri());
                            if (uIntrPriority >= ddi_intr_get_hilevel_pri())
                            {
                                /* Initialize the high-level mutex. */
                                mutex_init(&g_HighLevelIrqMtx, NULL /* pszDesc */, MUTEX_DRIVER, DDI_INTR_PRI(uIntrPriority));

                                /* Assign interrupt handler function to the interrupt handle. */
                                rc = ddi_intr_add_handler(g_pahIntrs[0], (ddi_intr_handler_t *)&vgdrvSolarisHighLevelISR,
                                                          NULL /* pvArg1 */, NULL /* pvArg2 */);

                                if (rc == DDI_SUCCESS)
                                {
                                    /* Add the low-level interrupt handler. */
                                    rc = ddi_intr_add_softint(pDip, &g_hSoftIntr, DDI_INTR_SOFTPRI_MAX,
                                                              (ddi_intr_handler_t *)&vgdrvSolarisISR, NULL /* pvArg1 */);
                                    if (rc == DDI_SUCCESS)
                                    {
                                        /* Initialize the low-level mutex at the corresponding level. */
                                        mutex_init(&g_IrqMtx, NULL /* pszDesc */,  MUTEX_DRIVER,
                                                   DDI_INTR_PRI(DDI_INTR_SOFTPRI_MAX));

                                        g_fSoftIntRegistered = true;
                                        /* Enable the high-level interrupt. */
                                        rc = ddi_intr_enable(g_pahIntrs[0]);
                                        if (rc == DDI_SUCCESS)
                                            return rc;

                                        LogRel((DEVICE_NAME "::AddIRQ: failed to enable interrupt. rc=%d\n", rc));
                                        mutex_destroy(&g_IrqMtx);
                                    }
                                    else
                                        LogRel((DEVICE_NAME "::AddIRQ: failed to add soft interrupt handler. rc=%d\n", rc));

                                    ddi_intr_remove_handler(g_pahIntrs[0]);
                                }
                                else
                                    LogRel((DEVICE_NAME "::AddIRQ: failed to add high-level interrupt handler. rc=%d\n", rc));

                                mutex_destroy(&g_HighLevelIrqMtx);
                            }
                            else
                            {
                                /* Interrupt handler runs at reschedulable level, initialize the mutex at the given priority. */
                                mutex_init(&g_IrqMtx, NULL /* pszDesc */, MUTEX_DRIVER, DDI_INTR_PRI(uIntrPriority));

                                /* Assign interrupt handler function to the interrupt handle. */
                                rc = ddi_intr_add_handler(g_pahIntrs[0], (ddi_intr_handler_t *)vgdrvSolarisISR,
                                                          NULL /* pvArg1 */, NULL /* pvArg2 */);
                                if (rc == DDI_SUCCESS)
                                {
                                    /* Enable the interrupt. */
                                    rc = ddi_intr_enable(g_pahIntrs[0]);
                                    if (rc == DDI_SUCCESS)
                                        return rc;

                                    LogRel((DEVICE_NAME "::AddIRQ: failed to enable interrupt. rc=%d\n", rc));
                                    mutex_destroy(&g_IrqMtx);
                                }
                            }
                        }
                        else
                            LogRel((DEVICE_NAME "::AddIRQ: failed to get priority of interrupt. rc=%d\n", rc));

                        Assert(cIntrAllocated == 1);
                        ddi_intr_free(g_pahIntrs[0]);
                    }
                    else
                        LogRel((DEVICE_NAME "::AddIRQ: failed to allocated IRQs. count=%d\n", cIntrCount));
                    RTMemFree(g_pahIntrs);
                }
                else
                    LogRel((DEVICE_NAME "::AddIRQ: failed to allocated IRQs. count=%d\n", cIntrCount));
            }
            else
                LogRel((DEVICE_NAME "::AddIRQ: failed to get or insufficient number of IRQs. rc=%d cIntrCount=%d\n", rc, cIntrCount));
        }
        else
            LogRel((DEVICE_NAME "::AddIRQ: fixed-type interrupts not supported. IntrType=%#x\n", fIntrType));
    }
    else
        LogRel((DEVICE_NAME "::AddIRQ: failed to get supported interrupt types. rc=%d\n", rc));
    return rc;
}
Exemplo n.º 14
0
extern uint32_t
emlxs_event_queue_create(emlxs_hba_t *hba)
{
	emlxs_event_queue_t *eventq = &EVENTQ;
	char buf[40];
#ifdef MSI_SUPPORT
	ddi_intr_handle_t handle;
	uint32_t intr_pri;
	int32_t actual;
	uint32_t ret;
#endif /* MSI_SUPPORT */
	ddi_iblock_cookie_t iblock;

	/* Clear the queue */
	bzero(eventq, sizeof (emlxs_event_queue_t));

	/* Initialize */
	(void) sprintf(buf, "?%s%d_evt_lock control variable", DRIVER_NAME,
	    hba->ddiinst);
	cv_init(&eventq->lock_cv, buf, CV_DRIVER, NULL);

	(void) sprintf(buf, "?%s%d_evt_lock mutex", DRIVER_NAME, hba->ddiinst);

	if (!(hba->intr_flags & EMLXS_MSI_ENABLED)) {
		/* Get the current interrupt block cookie */
		(void) ddi_get_iblock_cookie(hba->dip, (uint_t)EMLXS_INUMBER,
		    &iblock);

		/* Create the mutex lock */
		mutex_init(&eventq->lock, buf, MUTEX_DRIVER, (void *)iblock);
	}
#ifdef  MSI_SUPPORT
	else {
		/* Allocate a temporary interrupt handle */
		actual = 0;
		ret =
		    ddi_intr_alloc(hba->dip, &handle, DDI_INTR_TYPE_FIXED,
		    EMLXS_MSI_INUMBER, 1, &actual, DDI_INTR_ALLOC_NORMAL);

		if (ret != DDI_SUCCESS || actual == 0) {
			cmn_err(CE_WARN,
			    "?%s%d: Unable to allocate temporary interrupt "
			    "handle. ret=%d actual=%d", DRIVER_NAME,
			    hba->ddiinst, ret, actual);

			bzero(eventq, sizeof (emlxs_event_queue_t));

			return (0);
		}

		/* Get the current interrupt priority */
		ret = ddi_intr_get_pri(handle, &intr_pri);

		if (ret != DDI_SUCCESS) {
			cmn_err(CE_WARN,
			    "?%s%d: Unable to get interrupt priority. ret=%d",
			    DRIVER_NAME, hba->ddiinst, ret);

			bzero(eventq, sizeof (emlxs_event_queue_t));

			return (0);
		}

		/* Create the log mutex lock */
		mutex_init(&eventq->lock, buf, MUTEX_DRIVER,
		    (void *)((unsigned long)intr_pri));

		/* Free the temporary handle */
		(void) ddi_intr_free(handle);
	}
#endif

	return (1);

} /* emlxs_event_queue_create() */
Exemplo n.º 15
0
int
ddi_add_intr(dev_info_t *dip, uint_t inumber,
    ddi_iblock_cookie_t *iblock_cookiep,
    ddi_idevice_cookie_t *idevice_cookiep,
    uint_t (*int_handler)(caddr_t int_handler_arg),
    caddr_t int_handler_arg)
{
	ddi_intr_handle_t	*hdl_p;
	size_t			hdl_sz;
	int			actual, ret;
	uint_t			pri;

	DDI_INTR_APIDBG((CE_CONT, "ddi_add_intr: name=%s%d dip=0x%p "
	    "inum=0x%x\n", ddi_driver_name(dip), ddi_get_instance(dip),
	    (void *)dip, inumber));

	hdl_sz = sizeof (ddi_intr_handle_t) * (inumber + 1);
	hdl_p = kmem_zalloc(hdl_sz, KM_SLEEP);

	if ((ret = ddi_intr_alloc(dip, hdl_p, DDI_INTR_TYPE_FIXED,
	    inumber, 1, &actual, DDI_INTR_ALLOC_NORMAL)) != DDI_SUCCESS) {
		DDI_INTR_APIDBG((CE_CONT, "ddi_add_intr: "
		    "ddi_intr_alloc failed, ret 0x%x\n", ret));
		kmem_free(hdl_p, hdl_sz);
		return (DDI_INTR_NOTFOUND);
	}

	if ((ret = ddi_intr_get_pri(hdl_p[inumber], &pri)) != DDI_SUCCESS)  {
		DDI_INTR_APIDBG((CE_CONT, "ddi_add_intr: "
		    "ddi_intr_get_pri failed, ret 0x%x\n", ret));
		(void) ddi_intr_free(hdl_p[inumber]);
		kmem_free(hdl_p, hdl_sz);
		return (DDI_FAILURE);
	}

	if ((ret = ddi_intr_add_handler(hdl_p[inumber], (ddi_intr_handler_t *)
	    int_handler, int_handler_arg, NULL)) != DDI_SUCCESS) {
		DDI_INTR_APIDBG((CE_CONT, "ddi_add_intr: "
		    "ddi_intr_add_handler failed, ret 0x%x\n", ret));
		(void) ddi_intr_free(hdl_p[inumber]);
		kmem_free(hdl_p, hdl_sz);
		return (DDI_FAILURE);
	}

	if ((ret = ddi_intr_enable(hdl_p[inumber])) != DDI_SUCCESS) {
		DDI_INTR_APIDBG((CE_CONT, "ddi_add_intr: "
		    "ddi_intr_enable failed, ret 0x%x\n", ret));
		(void) ddi_intr_remove_handler(hdl_p[inumber]);
		(void) ddi_intr_free(hdl_p[inumber]);
		kmem_free(hdl_p, hdl_sz);
		return (DDI_FAILURE);
	}

	if (iblock_cookiep)
		*iblock_cookiep = (ddi_iblock_cookie_t)(uintptr_t)pri;

	if (idevice_cookiep) {
		idevice_cookiep->idev_vector = 0;
		idevice_cookiep->idev_priority = pri;
	}

	kmem_free(hdl_p, hdl_sz);

	return (DDI_SUCCESS);
}