static int s2mps11_pmic_probe(struct platform_device *pdev)
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = NULL;
struct of_regulator_match *rdata = NULL;
struct regulator_config config = { };
struct s2mps11_info *s2mps11;
int i, ret = 0;
const struct regulator_desc *regulators;
s2mps11 = devm_kzalloc(&pdev->dev, sizeof(struct s2mps11_info),
GFP_KERNEL);
if (!s2mps11)
return -ENOMEM;
s2mps11->dev_type = platform_get_device_id(pdev)->driver_data;
switch (s2mps11->dev_type) {
case S2MPS11X:
s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
regulators = s2mps11_regulators;
break;
case S2MPS14X:
s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
regulators = s2mps14_regulators;
break;
case S2MPU02:
s2mps11->rdev_num = ARRAY_SIZE(s2mpu02_regulators);
regulators = s2mpu02_regulators;
break;
default:
dev_err(&pdev->dev, "Invalid device type: %u\n",
s2mps11->dev_type);
return -EINVAL;
};
s2mps11->ext_control_gpio = devm_kzalloc(&pdev->dev,
sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num,
GFP_KERNEL);
if (!s2mps11->ext_control_gpio)
return -ENOMEM;
/*
* 0 is a valid GPIO so initialize all GPIO-s to negative value
* to indicate that external control won't be used for this regulator.
*/
for (i = 0; i < s2mps11->rdev_num; i++)
s2mps11->ext_control_gpio[i] = -EINVAL;
if (!iodev->dev->of_node) {
if (iodev->pdata) {
pdata = iodev->pdata;
goto common_reg;
} else {
dev_err(pdev->dev.parent,
"Platform data or DT node not supplied\n");
return -ENODEV;
}
}
rdata = kzalloc(sizeof(*rdata) * s2mps11->rdev_num, GFP_KERNEL);
if (!rdata)
return -ENOMEM;
for (i = 0; i < s2mps11->rdev_num; i++)
rdata[i].name = regulators[i].name;
ret = s2mps11_pmic_dt_parse(pdev, rdata, s2mps11);
if (ret)
goto out;
common_reg:
platform_set_drvdata(pdev, s2mps11);
config.dev = &pdev->dev;
config.regmap = iodev->regmap_pmic;
config.driver_data = s2mps11;
config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
for (i = 0; i < s2mps11->rdev_num; i++) {
struct regulator_dev *regulator;
if (pdata) {
config.init_data = pdata->regulators[i].initdata;
config.of_node = pdata->regulators[i].reg_node;
} else {
config.init_data = rdata[i].init_data;
config.of_node = rdata[i].of_node;
}
config.ena_gpio = s2mps11->ext_control_gpio[i];
regulator = devm_regulator_register(&pdev->dev,
®ulators[i], &config);
if (IS_ERR(regulator)) {
ret = PTR_ERR(regulator);
dev_err(&pdev->dev, "regulator init failed for %d\n",
i);
goto out;
}
if (gpio_is_valid(s2mps11->ext_control_gpio[i])) {
ret = s2mps14_pmic_enable_ext_control(s2mps11,
regulator);
if (ret < 0) {
dev_err(&pdev->dev,
"failed to enable GPIO control over %s: %d\n",
regulator->desc->name, ret);
goto out;
}
}
}
out:
kfree(rdata);
return ret;
}
static int mc13892_regulator_probe(struct platform_device *pdev)
{
struct mc13xxx_regulator_priv *priv;
struct mc13xxx *mc13892 = dev_get_drvdata(pdev->dev.parent);
struct mc13xxx_regulator_platform_data *pdata =
dev_get_platdata(&pdev->dev);
struct mc13xxx_regulator_init_data *mc13xxx_data;
struct regulator_config config = { };
int i, ret;
int num_regulators = 0;
u32 val;
num_regulators = mc13xxx_get_num_regulators_dt(pdev);
if (num_regulators <= 0 && pdata)
num_regulators = pdata->num_regulators;
if (num_regulators <= 0)
return -EINVAL;
priv = devm_kzalloc(&pdev->dev, sizeof(*priv) +
num_regulators * sizeof(priv->regulators[0]),
GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->num_regulators = num_regulators;
priv->mc13xxx_regulators = mc13892_regulators;
priv->mc13xxx = mc13892;
platform_set_drvdata(pdev, priv);
mc13xxx_lock(mc13892);
ret = mc13xxx_reg_read(mc13892, MC13892_REVISION, &val);
if (ret)
goto err_unlock;
/* enable switch auto mode (on 2.0A silicon only) */
if ((val & 0x0000FFFF) == 0x45d0) {
ret = mc13xxx_reg_rmw(mc13892, MC13892_SWITCHERS4,
MC13892_SWITCHERS4_SW1MODE_M |
MC13892_SWITCHERS4_SW2MODE_M,
MC13892_SWITCHERS4_SW1MODE_AUTO |
MC13892_SWITCHERS4_SW2MODE_AUTO);
if (ret)
goto err_unlock;
ret = mc13xxx_reg_rmw(mc13892, MC13892_SWITCHERS5,
MC13892_SWITCHERS5_SW3MODE_M |
MC13892_SWITCHERS5_SW4MODE_M,
MC13892_SWITCHERS5_SW3MODE_AUTO |
MC13892_SWITCHERS5_SW4MODE_AUTO);
if (ret)
goto err_unlock;
}
mc13xxx_unlock(mc13892);
/* update mc13892_vcam ops */
memcpy(&mc13892_vcam_ops, mc13892_regulators[MC13892_VCAM].desc.ops,
sizeof(struct regulator_ops));
mc13892_vcam_ops.set_mode = mc13892_vcam_set_mode,
mc13892_vcam_ops.get_mode = mc13892_vcam_get_mode,
mc13892_regulators[MC13892_VCAM].desc.ops = &mc13892_vcam_ops;
mc13xxx_data = mc13xxx_parse_regulators_dt(pdev, mc13892_regulators,
ARRAY_SIZE(mc13892_regulators));
for (i = 0; i < priv->num_regulators; i++) {
struct regulator_init_data *init_data;
struct regulator_desc *desc;
struct device_node *node = NULL;
int id;
if (mc13xxx_data) {
id = mc13xxx_data[i].id;
init_data = mc13xxx_data[i].init_data;
node = mc13xxx_data[i].node;
} else {
id = pdata->regulators[i].id;
init_data = pdata->regulators[i].init_data;
}
desc = &mc13892_regulators[id].desc;
config.dev = &pdev->dev;
config.init_data = init_data;
config.driver_data = priv;
config.of_node = node;
priv->regulators[i] = devm_regulator_register(&pdev->dev, desc,
&config);
if (IS_ERR(priv->regulators[i])) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
mc13892_regulators[i].desc.name);
return PTR_ERR(priv->regulators[i]);
}
}
return 0;
err_unlock:
mc13xxx_unlock(mc13892);
return ret;
}
static int ab8500_ext_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
struct ab8500_platform_data *ppdata;
struct ab8500_regulator_platform_data *pdata;
struct device_node *np = pdev->dev.of_node;
struct regulator_config config = { };
int i, err;
if (np) {
err = of_regulator_match(&pdev->dev, np,
ab8500_ext_regulator_match,
ARRAY_SIZE(ab8500_ext_regulator_match));
if (err < 0) {
dev_err(&pdev->dev,
"Error parsing regulator init data: %d\n", err);
return err;
}
}
if (!ab8500) {
dev_err(&pdev->dev, "null mfd parent\n");
return -EINVAL;
}
ppdata = dev_get_platdata(ab8500->dev);
if (!ppdata) {
dev_err(&pdev->dev, "null parent pdata\n");
return -EINVAL;
}
pdata = ppdata->regulator;
if (!pdata) {
dev_err(&pdev->dev, "null pdata\n");
return -EINVAL;
}
/* make sure the platform data has the correct size */
if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) {
dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
return -EINVAL;
}
/* check for AB8500 2.x */
if (is_ab8500_2p0_or_earlier(ab8500)) {
struct ab8500_ext_regulator_info *info;
/* VextSupply3LPn is inverted on AB8500 2.x */
info = &ab8500_ext_regulator_info[AB8500_EXT_SUPPLY3];
info->update_val = 0x30;
info->update_val_hp = 0x30;
info->update_val_lp = 0x10;
}
/* register all regulators */
for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) {
struct ab8500_ext_regulator_info *info = NULL;
/* assign per-regulator data */
info = &ab8500_ext_regulator_info[i];
info->dev = &pdev->dev;
info->cfg = (struct ab8500_ext_regulator_cfg *)
pdata->ext_regulator[i].driver_data;
config.dev = &pdev->dev;
config.driver_data = info;
config.of_node = ab8500_ext_regulator_match[i].of_node;
config.init_data = (np) ?
ab8500_ext_regulator_match[i].init_data :
&pdata->ext_regulator[i];
/* register regulator with framework */
info->rdev = devm_regulator_register(&pdev->dev, &info->desc,
&config);
if (IS_ERR(info->rdev)) {
err = PTR_ERR(info->rdev);
dev_err(&pdev->dev, "failed to register regulator %s\n",
info->desc.name);
return err;
}
dev_dbg(rdev_get_dev(info->rdev),
"%s-probed\n", info->desc.name);
}
return 0;
}
static int da9063_regulator_probe(struct platform_device *pdev)
{
struct da9063 *da9063 = dev_get_drvdata(pdev->dev.parent);
struct da9063_pdata *da9063_pdata = dev_get_platdata(da9063->dev);
struct of_regulator_match *da9063_reg_matches = NULL;
struct da9063_regulators_pdata *regl_pdata;
const struct da9063_dev_model *model;
struct da9063_regulators *regulators;
struct da9063_regulator *regl;
struct regulator_config config;
bool bcores_merged, bmem_bio_merged;
int id, irq, n, n_regulators, ret, val;
size_t size;
regl_pdata = da9063_pdata ? da9063_pdata->regulators_pdata : NULL;
if (!regl_pdata)
regl_pdata = da9063_parse_regulators_dt(pdev,
&da9063_reg_matches);
if (IS_ERR(regl_pdata) || regl_pdata->n_regulators == 0) {
dev_err(&pdev->dev,
"No regulators defined for the platform\n");
return PTR_ERR(regl_pdata);
}
/* Find regulators set for particular device model */
for (model = regulators_models; model->regulator_info; model++) {
if (model->dev_model == da9063->model)
break;
}
if (!model->regulator_info) {
dev_err(&pdev->dev, "Chip model not recognised (%u)\n",
da9063->model);
return -ENODEV;
}
ret = regmap_read(da9063->regmap, DA9063_REG_CONFIG_H, &val);
if (ret < 0) {
dev_err(&pdev->dev,
"Error while reading BUCKs configuration\n");
return -EIO;
}
bcores_merged = val & DA9063_BCORE_MERGE;
bmem_bio_merged = val & DA9063_BUCK_MERGE;
n_regulators = model->n_regulators;
if (bcores_merged)
n_regulators -= 2; /* remove BCORE1, BCORE2 */
else
n_regulators--; /* remove BCORES_MERGED */
if (bmem_bio_merged)
n_regulators -= 2; /* remove BMEM, BIO */
else
n_regulators--; /* remove BMEM_BIO_MERGED */
/* Allocate memory required by usable regulators */
size = sizeof(struct da9063_regulators) +
n_regulators * sizeof(struct da9063_regulator);
regulators = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
if (!regulators) {
dev_err(&pdev->dev, "No memory for regulators\n");
return -ENOMEM;
}
regulators->n_regulators = n_regulators;
platform_set_drvdata(pdev, regulators);
/* Register all regulators declared in platform information */
n = 0;
id = 0;
while (n < regulators->n_regulators) {
/* Skip regulator IDs depending on merge mode configuration */
switch (id) {
case DA9063_ID_BCORE1:
case DA9063_ID_BCORE2:
if (bcores_merged) {
id++;
continue;
}
break;
case DA9063_ID_BMEM:
case DA9063_ID_BIO:
if (bmem_bio_merged) {
id++;
continue;
}
break;
case DA9063_ID_BCORES_MERGED:
if (!bcores_merged) {
id++;
continue;
}
break;
case DA9063_ID_BMEM_BIO_MERGED:
if (!bmem_bio_merged) {
id++;
continue;
}
break;
}
/* Initialise regulator structure */
regl = ®ulators->regulator[n];
regl->hw = da9063;
regl->info = &model->regulator_info[id];
regl->desc = regl->info->desc;
regl->desc.type = REGULATOR_VOLTAGE;
regl->desc.owner = THIS_MODULE;
if (regl->info->mode.reg)
regl->mode = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->mode);
if (regl->info->suspend.reg)
regl->suspend = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->suspend);
if (regl->info->sleep.reg)
regl->sleep = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->sleep);
if (regl->info->suspend_sleep.reg)
regl->suspend_sleep = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->suspend_sleep);
if (regl->info->ilimit.reg)
regl->ilimit = devm_regmap_field_alloc(&pdev->dev,
da9063->regmap, regl->info->ilimit);
/* Register regulator */
memset(&config, 0, sizeof(config));
config.dev = &pdev->dev;
config.init_data = da9063_get_regulator_initdata(regl_pdata, id);
config.driver_data = regl;
if (da9063_reg_matches)
config.of_node = da9063_reg_matches[id].of_node;
config.regmap = da9063->regmap;
regl->rdev = devm_regulator_register(&pdev->dev, ®l->desc,
&config);
if (IS_ERR(regl->rdev)) {
dev_err(&pdev->dev,
"Failed to register %s regulator\n",
regl->desc.name);
return PTR_ERR(regl->rdev);
}
id++;
n++;
}
/* LDOs overcurrent event support */
irq = platform_get_irq_byname(pdev, "LDO_LIM");
if (irq < 0) {
dev_err(&pdev->dev, "Failed to get IRQ.\n");
return irq;
}
regulators->irq_ldo_lim = regmap_irq_get_virq(da9063->regmap_irq, irq);
if (regulators->irq_ldo_lim >= 0) {
ret = request_threaded_irq(regulators->irq_ldo_lim,
NULL, da9063_ldo_lim_event,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
"LDO_LIM", regulators);
if (ret) {
dev_err(&pdev->dev,
"Failed to request LDO_LIM IRQ.\n");
regulators->irq_ldo_lim = -ENXIO;
}
}
return 0;
}
static int reg_fixed_voltage_probe(struct platform_device *pdev)
{
struct fixed_voltage_config *config;
struct fixed_voltage_data *drvdata;
struct regulator_config cfg = { };
int ret;
if (pdev->dev.of_node) {
config = of_get_fixed_voltage_config(&pdev->dev);
if (IS_ERR(config))
return PTR_ERR(config);
} else {
config = dev_get_platdata(&pdev->dev);
}
if (!config)
return -ENOMEM;
drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
GFP_KERNEL);
if (!drvdata)
return -ENOMEM;
drvdata->desc.name = devm_kstrdup(&pdev->dev,
config->supply_name,
GFP_KERNEL);
if (drvdata->desc.name == NULL) {
dev_err(&pdev->dev, "Failed to allocate supply name\n");
return -ENOMEM;
}
drvdata->desc.type = REGULATOR_VOLTAGE;
drvdata->desc.owner = THIS_MODULE;
drvdata->desc.ops = &fixed_voltage_ops;
drvdata->desc.enable_time = config->startup_delay;
if (config->input_supply) {
drvdata->desc.supply_name = devm_kstrdup(&pdev->dev,
config->input_supply,
GFP_KERNEL);
if (!drvdata->desc.supply_name) {
dev_err(&pdev->dev,
"Failed to allocate input supply\n");
return -ENOMEM;
}
}
if (config->microvolts)
drvdata->desc.n_voltages = 1;
drvdata->desc.fixed_uV = config->microvolts;
cfg.ena_gpio = config->gpio;
cfg.ena_gpio_invert = !config->enable_high;
if (config->enabled_at_boot) {
if (config->enable_high)
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
else
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
} else {
if (config->enable_high)
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
else
cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
}
if (config->gpio_is_open_drain)
cfg.ena_gpio_flags |= GPIOF_OPEN_DRAIN;
cfg.dev = &pdev->dev;
cfg.init_data = config->init_data;
cfg.driver_data = drvdata;
cfg.of_node = pdev->dev.of_node;
drvdata->dev = devm_regulator_register(&pdev->dev, &drvdata->desc,
&cfg);
if (IS_ERR(drvdata->dev)) {
ret = PTR_ERR(drvdata->dev);
dev_err(&pdev->dev, "Failed to register regulator: %d\n", ret);
return ret;
}
platform_set_drvdata(pdev, drvdata);
dev_dbg(&pdev->dev, "%s supplying %duV\n", drvdata->desc.name,
drvdata->desc.fixed_uV);
return 0;
}
static int tps65917_smps_registration(struct palmas_pmic *pmic,
struct palmas_pmic_driver_data *ddata,
struct palmas_pmic_platform_data *pdata,
const char *pdev_name,
struct regulator_config config)
{
int id, ret;
unsigned int addr, reg;
struct regulator_dev *rdev;
struct palmas_reg_init *reg_init;
struct palmas_regs_info *rinfo;
struct regulator_desc *desc;
for (id = ddata->smps_start; id <= ddata->smps_end; id++) {
/*
* Miss out regulators which are not available due
* to slaving configurations.
*/
desc = &pmic->desc[id];
desc->n_linear_ranges = 3;
if ((id == TPS65917_REG_SMPS2) && pmic->smps12)
continue;
/* Initialise sleep/init values from platform data */
if (pdata && pdata->reg_init[id]) {
reg_init = pdata->reg_init[id];
ret = palmas_smps_init(pmic->palmas, id, reg_init);
if (ret)
return ret;
} else {
reg_init = NULL;
}
rinfo = &ddata->palmas_regs_info[id];
/* Register the regulators */
desc->name = rinfo->name;
desc->id = id;
/*
* Read and store the RANGE bit for later use
* This must be done before regulator is probed,
* otherwise we error in probe with unsupportable
* ranges. Read the current smps mode for later use.
*/
addr = rinfo->vsel_addr;
ret = palmas_smps_read(pmic->palmas, addr, ®);
if (ret)
return ret;
if (reg & TPS65917_SMPS1_VOLTAGE_RANGE)
pmic->range[id] = 1;
if (pmic->range[id])
desc->linear_ranges = smps_high_ranges;
else
desc->linear_ranges = smps_low_ranges;
if (reg_init && reg_init->roof_floor)
desc->ops = &tps65917_ops_ext_control_smps;
else
desc->ops = &tps65917_ops_smps;
desc->n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
desc->vsel_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
rinfo->vsel_addr);
desc->vsel_mask = PALMAS_SMPS12_VOLTAGE_VSEL_MASK;
desc->ramp_delay = 2500;
/* Read the smps mode for later use. */
addr = rinfo->ctrl_addr;
ret = palmas_smps_read(pmic->palmas, addr, ®);
if (ret)
return ret;
pmic->current_reg_mode[id] = reg &
PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
desc->enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
rinfo->ctrl_addr);
desc->enable_mask = PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
/* set_mode overrides this value */
desc->enable_val = SMPS_CTRL_MODE_ON;
desc->type = REGULATOR_VOLTAGE;
desc->owner = THIS_MODULE;
if (pdata)
config.init_data = pdata->reg_data[id];
else
config.init_data = NULL;
desc->supply_name = rinfo->sname;
config.of_node = ddata->palmas_matches[id].of_node;
rdev = devm_regulator_register(pmic->dev, desc, &config);
if (IS_ERR(rdev)) {
dev_err(pmic->dev,
"failed to register %s regulator\n",
pdev_name);
return PTR_ERR(rdev);
}
/* Save regulator for cleanup */
pmic->rdev[id] = rdev;
}
return 0;
}
static int tps65917_ldo_registration(struct palmas_pmic *pmic,
struct palmas_pmic_driver_data *ddata,
struct palmas_pmic_platform_data *pdata,
const char *pdev_name,
struct regulator_config config)
{
int id, ret;
struct regulator_dev *rdev;
struct palmas_reg_init *reg_init;
struct palmas_regs_info *rinfo;
struct regulator_desc *desc;
for (id = ddata->ldo_begin; id < ddata->max_reg; id++) {
if (pdata && pdata->reg_init[id])
reg_init = pdata->reg_init[id];
else
reg_init = NULL;
/* Miss out regulators which are not available due
* to alternate functions.
*/
rinfo = &ddata->palmas_regs_info[id];
/* Register the regulators */
desc = &pmic->desc[id];
desc->name = rinfo->name;
desc->id = id;
desc->type = REGULATOR_VOLTAGE;
desc->owner = THIS_MODULE;
if (id < TPS65917_REG_REGEN1) {
desc->n_voltages = PALMAS_LDO_NUM_VOLTAGES;
if (reg_init && reg_init->roof_floor)
desc->ops = &palmas_ops_ext_control_ldo;
else
desc->ops = &tps65917_ops_ldo;
desc->min_uV = 900000;
desc->uV_step = 50000;
desc->linear_min_sel = 1;
desc->enable_time = 500;
desc->vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
rinfo->vsel_addr);
desc->vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK;
desc->enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
rinfo->ctrl_addr);
desc->enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
/*
* To be confirmed. Discussion on going with PMIC Team.
* It is of the order of ~60mV/uS.
*/
desc->ramp_delay = 2500;
} else {
desc->n_voltages = 1;
if (reg_init && reg_init->roof_floor)
desc->ops = &palmas_ops_ext_control_extreg;
else
desc->ops = &palmas_ops_extreg;
desc->enable_reg =
PALMAS_BASE_TO_REG(PALMAS_RESOURCE_BASE,
rinfo->ctrl_addr);
desc->enable_mask = PALMAS_REGEN1_CTRL_MODE_ACTIVE;
}
if (pdata)
config.init_data = pdata->reg_data[id];
else
config.init_data = NULL;
desc->supply_name = rinfo->sname;
config.of_node = ddata->palmas_matches[id].of_node;
rdev = devm_regulator_register(pmic->dev, desc, &config);
if (IS_ERR(rdev)) {
dev_err(pmic->dev,
"failed to register %s regulator\n",
pdev_name);
return PTR_ERR(rdev);
}
/* Save regulator for cleanup */
pmic->rdev[id] = rdev;
/* Initialise sleep/init values from platform data */
if (pdata) {
reg_init = pdata->reg_init[id];
if (reg_init) {
if (id < TPS65917_REG_REGEN1)
ret = palmas_ldo_init(pmic->palmas,
id, reg_init);
else
ret = palmas_extreg_init(pmic->palmas,
id, reg_init);
if (ret)
return ret;
}
}
}
return 0;
}
static int axp20x_regulator_probe(struct platform_device *pdev)
{
struct regulator_dev *rdev;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
const struct regulator_desc *regulators;
struct regulator_config config = {
.dev = pdev->dev.parent,
.regmap = axp20x->regmap,
.driver_data = axp20x,
};
int ret, i, nregulators;
u32 workmode;
const char *dcdc1_name = axp22x_regulators[AXP22X_DCDC1].name;
const char *dcdc5_name = axp22x_regulators[AXP22X_DCDC5].name;
bool drivevbus = false;
switch (axp20x->variant) {
case AXP202_ID:
case AXP209_ID:
regulators = axp20x_regulators;
nregulators = AXP20X_REG_ID_MAX;
break;
case AXP221_ID:
case AXP223_ID:
regulators = axp22x_regulators;
nregulators = AXP22X_REG_ID_MAX;
drivevbus = of_property_read_bool(pdev->dev.parent->of_node,
"x-powers,drive-vbus-en");
break;
case AXP809_ID:
regulators = axp809_regulators;
nregulators = AXP809_REG_ID_MAX;
break;
default:
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
axp20x->variant);
return -EINVAL;
}
/* This only sets the dcdc freq. Ignore any errors */
axp20x_regulator_parse_dt(pdev);
for (i = 0; i < nregulators; i++) {
const struct regulator_desc *desc = ®ulators[i];
struct regulator_desc *new_desc;
/*
* Regulators DC1SW and DC5LDO are connected internally,
* so we have to handle their supply names separately.
*
* We always register the regulators in proper sequence,
* so the supply names are correctly read. See the last
* part of this loop to see where we save the DT defined
* name.
*/
if ((regulators == axp22x_regulators && i == AXP22X_DC1SW) ||
(regulators == axp809_regulators && i == AXP809_DC1SW)) {
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
GFP_KERNEL);
*new_desc = regulators[i];
new_desc->supply_name = dcdc1_name;
desc = new_desc;
}
if ((regulators == axp22x_regulators && i == AXP22X_DC5LDO) ||
(regulators == axp809_regulators && i == AXP809_DC5LDO)) {
new_desc = devm_kzalloc(&pdev->dev, sizeof(*desc),
GFP_KERNEL);
*new_desc = regulators[i];
new_desc->supply_name = dcdc5_name;
desc = new_desc;
}
rdev = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register %s\n",
regulators[i].name);
return PTR_ERR(rdev);
}
ret = of_property_read_u32(rdev->dev.of_node,
"x-powers,dcdc-workmode",
&workmode);
if (!ret) {
if (axp20x_set_dcdc_workmode(rdev, i, workmode))
dev_err(&pdev->dev, "Failed to set workmode on %s\n",
rdev->desc->name);
}
/*
* Save AXP22X DCDC1 / DCDC5 regulator names for later.
*/
if ((regulators == axp22x_regulators && i == AXP22X_DCDC1) ||
(regulators == axp809_regulators && i == AXP809_DCDC1))
of_property_read_string(rdev->dev.of_node,
"regulator-name",
&dcdc1_name);
if ((regulators == axp22x_regulators && i == AXP22X_DCDC5) ||
(regulators == axp809_regulators && i == AXP809_DCDC5))
of_property_read_string(rdev->dev.of_node,
"regulator-name",
&dcdc5_name);
}
if (drivevbus) {
/* Change N_VBUSEN sense pin to DRIVEVBUS output pin */
regmap_update_bits(axp20x->regmap, AXP20X_OVER_TMP,
AXP22X_MISC_N_VBUSEN_FUNC, 0);
rdev = devm_regulator_register(&pdev->dev,
&axp22x_drivevbus_regulator,
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register drivevbus\n");
return PTR_ERR(rdev);
}
}
return 0;
}
static struct platform_driver axp20x_regulator_driver = {
.probe = axp20x_regulator_probe,
.driver = {
.name = "axp20x-regulator",
},
};
module_platform_driver(axp20x_regulator_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Carlo Caione <*****@*****.**>");
MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");
MODULE_ALIAS("platform:axp20x-regulator");
static int max8973_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max8973_regulator_platform_data *pdata;
struct regulator_init_data *ridata;
struct regulator_config config = { };
struct regulator_dev *rdev;
struct max8973_chip *max;
bool pdata_from_dt = false;
unsigned int chip_id;
int ret;
pdata = dev_get_platdata(&client->dev);
if (!pdata && client->dev.of_node) {
pdata = max8973_parse_dt(&client->dev);
pdata_from_dt = true;
}
if (!pdata) {
dev_err(&client->dev, "No Platform data");
return -EIO;
}
if ((pdata->dvs_gpio == -EPROBE_DEFER) ||
(pdata->enable_gpio == -EPROBE_DEFER))
return -EPROBE_DEFER;
max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
max->regmap = devm_regmap_init_i2c(client, &max8973_regmap_config);
if (IS_ERR(max->regmap)) {
ret = PTR_ERR(max->regmap);
dev_err(&client->dev, "regmap init failed, err %d\n", ret);
return ret;
}
if (client->dev.of_node) {
const struct of_device_id *match;
match = of_match_device(of_match_ptr(of_max8973_match_tbl),
&client->dev);
if (!match)
return -ENODATA;
max->id = (u32)((uintptr_t)match->data);
} else {
max->id = id->driver_data;
}
ret = regmap_read(max->regmap, MAX8973_CHIPID1, &chip_id);
if (ret < 0) {
dev_err(&client->dev, "register CHIPID1 read failed, %d", ret);
return ret;
}
dev_info(&client->dev, "CHIP-ID OTP: 0x%02x ID_M: 0x%02x\n",
(chip_id >> 4) & 0xF, (chip_id >> 1) & 0x7);
i2c_set_clientdata(client, max);
max->ops = max8973_dcdc_ops;
max->dev = &client->dev;
max->desc.name = id->name;
max->desc.id = 0;
max->desc.ops = &max->ops;
max->desc.type = REGULATOR_VOLTAGE;
max->desc.owner = THIS_MODULE;
max->desc.min_uV = MAX8973_MIN_VOLATGE;
max->desc.uV_step = MAX8973_VOLATGE_STEP;
max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE;
max->dvs_gpio = (pdata->dvs_gpio) ? pdata->dvs_gpio : -EINVAL;
max->enable_gpio = (pdata->enable_gpio) ? pdata->enable_gpio : -EINVAL;
max->enable_external_control = pdata->enable_ext_control;
max->curr_gpio_val = pdata->dvs_def_state;
max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
if (gpio_is_valid(max->enable_gpio))
max->enable_external_control = true;
max->lru_index[0] = max->curr_vout_reg;
if (gpio_is_valid(max->dvs_gpio)) {
int gpio_flags;
int i;
gpio_flags = (pdata->dvs_def_state) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
ret = devm_gpio_request_one(&client->dev, max->dvs_gpio,
gpio_flags, "max8973-dvs");
if (ret) {
dev_err(&client->dev,
"gpio_request for gpio %d failed, err = %d\n",
max->dvs_gpio, ret);
return ret;
}
/*
* Initialize the lru index with vout_reg id
* The index 0 will be most recently used and
* set with the max->curr_vout_reg */
for (i = 0; i < MAX8973_MAX_VOUT_REG; ++i)
max->lru_index[i] = i;
max->lru_index[0] = max->curr_vout_reg;
max->lru_index[max->curr_vout_reg] = 0;
} else {
/*
* If there is no DVS GPIO, the VOUT register
* address is fixed.
*/
max->ops.set_voltage_sel = regulator_set_voltage_sel_regmap;
max->ops.get_voltage_sel = regulator_get_voltage_sel_regmap;
max->desc.vsel_reg = max->curr_vout_reg;
max->desc.vsel_mask = MAX8973_VOUT_MASK;
}
if (pdata_from_dt)
pdata->reg_init_data = of_get_regulator_init_data(&client->dev,
client->dev.of_node, &max->desc);
ridata = pdata->reg_init_data;
switch (max->id) {
case MAX8973:
if (!pdata->enable_ext_control) {
max->desc.enable_reg = MAX8973_VOUT;
max->desc.enable_mask = MAX8973_VOUT_ENABLE;
max->ops.enable = regulator_enable_regmap;
max->ops.disable = regulator_disable_regmap;
max->ops.is_enabled = regulator_is_enabled_regmap;
break;
}
if (gpio_is_valid(max->enable_gpio)) {
config.ena_gpio_flags = GPIOF_OUT_INIT_LOW;
if (ridata && (ridata->constraints.always_on ||
ridata->constraints.boot_on))
config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
config.ena_gpio = max->enable_gpio;
}
break;
case MAX77621:
if (gpio_is_valid(max->enable_gpio)) {
ret = devm_gpio_request_one(&client->dev,
max->enable_gpio, GPIOF_OUT_INIT_HIGH,
"max8973-en-gpio");
if (ret) {
dev_err(&client->dev,
"gpio_request for gpio %d failed: %d\n",
max->enable_gpio, ret);
return ret;
}
}
max->desc.enable_reg = MAX8973_VOUT;
max->desc.enable_mask = MAX8973_VOUT_ENABLE;
max->ops.enable = regulator_enable_regmap;
max->ops.disable = regulator_disable_regmap;
max->ops.is_enabled = regulator_is_enabled_regmap;
max->ops.set_current_limit = max8973_set_current_limit;
max->ops.get_current_limit = max8973_get_current_limit;
break;
default:
break;
}
ret = max8973_init_dcdc(max, pdata);
if (ret < 0) {
dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
return ret;
}
config.dev = &client->dev;
config.init_data = pdata->reg_init_data;
config.driver_data = max;
config.of_node = client->dev.of_node;
config.regmap = max->regmap;
/* Register the regulators */
rdev = devm_regulator_register(&client->dev, &max->desc, &config);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(max->dev, "regulator register failed, err %d\n", ret);
return ret;
}
return 0;
}
static int tps_65023_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
const struct tps_driver_data *drv_data = (void *)id->driver_data;
const struct tps_info *info = drv_data->info;
struct regulator_config config = { };
struct regulator_init_data *init_data;
struct regulator_dev *rdev;
struct tps_pmic *tps;
int i;
int error;
/**
* init_data points to array of regulator_init structures
* coming from the board-evm file.
*/
init_data = dev_get_platdata(&client->dev);
if (!init_data)
return -EIO;
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
if (!tps)
return -ENOMEM;
tps->regmap = devm_regmap_init_i2c(client, &tps65023_regmap_config);
if (IS_ERR(tps->regmap)) {
error = PTR_ERR(tps->regmap);
dev_err(&client->dev, "Failed to allocate register map: %d\n",
error);
return error;
}
/* common for all regulators */
tps->core_regulator = drv_data->core_regulator;
for (i = 0; i < TPS65023_NUM_REGULATOR; i++, info++, init_data++) {
/* Store regulator specific information */
tps->info[i] = info;
tps->desc[i].name = info->name;
tps->desc[i].id = i;
tps->desc[i].n_voltages = info->table_len;
tps->desc[i].volt_table = info->table;
tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
&tps65023_ldo_ops : &tps65023_dcdc_ops);
tps->desc[i].type = REGULATOR_VOLTAGE;
tps->desc[i].owner = THIS_MODULE;
tps->desc[i].enable_reg = TPS65023_REG_REG_CTRL;
switch (i) {
case TPS65023_LDO_1:
tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
tps->desc[i].vsel_mask = 0x07;
tps->desc[i].enable_mask = 1 << 1;
break;
case TPS65023_LDO_2:
tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
tps->desc[i].vsel_mask = 0x70;
tps->desc[i].enable_mask = 1 << 2;
break;
default: /* DCDCx */
tps->desc[i].enable_mask =
1 << (TPS65023_NUM_REGULATOR - i);
tps->desc[i].vsel_reg = TPS65023_REG_DEF_CORE;
tps->desc[i].vsel_mask = info->table_len - 1;
tps->desc[i].apply_reg = TPS65023_REG_CON_CTRL2;
tps->desc[i].apply_bit = TPS65023_REG_CTRL2_GO;
}
config.dev = &client->dev;
config.init_data = init_data;
config.driver_data = tps;
config.regmap = tps->regmap;
/* Register the regulators */
rdev = devm_regulator_register(&client->dev, &tps->desc[i],
&config);
if (IS_ERR(rdev)) {
dev_err(&client->dev, "failed to register %s\n",
id->name);
return PTR_ERR(rdev);
}
/* Save regulator for cleanup */
tps->rdev[i] = rdev;
}
i2c_set_clientdata(client, tps);
/* Enable setting output voltage by I2C */
regmap_update_bits(tps->regmap, TPS65023_REG_CON_CTRL2,
TPS65023_REG_CTRL2_CORE_ADJ,
TPS65023_REG_CTRL2_CORE_ADJ);
return 0;
}
static int max8952_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct max8952_platform_data *pdata = dev_get_platdata(&client->dev);
struct regulator_config config = { };
struct max8952_data *max8952;
struct regulator_dev *rdev;
int ret = 0, err = 0;
if (client->dev.of_node)
pdata = max8952_parse_dt(&client->dev);
if (!pdata) {
dev_err(&client->dev, "Require the platform data\n");
return -EINVAL;
}
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE))
return -EIO;
max8952 = devm_kzalloc(&client->dev, sizeof(struct max8952_data),
GFP_KERNEL);
if (!max8952)
return -ENOMEM;
max8952->client = client;
max8952->pdata = pdata;
config.dev = &client->dev;
config.init_data = pdata->reg_data;
config.driver_data = max8952;
config.of_node = client->dev.of_node;
config.ena_gpio = pdata->gpio_en;
if (client->dev.of_node)
config.ena_gpio_initialized = true;
if (pdata->reg_data->constraints.boot_on)
config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
rdev = devm_regulator_register(&client->dev, ®ulator, &config);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(&client->dev, "regulator init failed (%d)\n", ret);
return ret;
}
max8952->vid0 = pdata->default_mode & 0x1;
max8952->vid1 = (pdata->default_mode >> 1) & 0x1;
if (gpio_is_valid(pdata->gpio_vid0) &&
gpio_is_valid(pdata->gpio_vid1)) {
unsigned long gpio_flags;
gpio_flags = max8952->vid0 ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
if (devm_gpio_request_one(&client->dev, pdata->gpio_vid0,
gpio_flags, "MAX8952 VID0"))
err = 1;
gpio_flags = max8952->vid1 ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
if (devm_gpio_request_one(&client->dev, pdata->gpio_vid1,
gpio_flags, "MAX8952 VID1"))
err = 2;
} else
err = 3;
if (err) {
dev_warn(&client->dev, "VID0/1 gpio invalid: "
"DVS not available.\n");
max8952->vid0 = 0;
max8952->vid1 = 0;
/* Mark invalid */
pdata->gpio_vid0 = -1;
pdata->gpio_vid1 = -1;
/* Disable Pulldown of EN only */
max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x60);
dev_err(&client->dev, "DVS modes disabled because VID0 and VID1"
" do not have proper controls.\n");
} else {
/*
* Disable Pulldown on EN, VID0, VID1 to reduce
* leakage current of MAX8952 assuming that MAX8952
* is turned on (EN==1). Note that without having VID0/1
* properly connected, turning pulldown off can be
* problematic. Thus, turn this off only when they are
* controllable by GPIO.
*/
max8952_write_reg(max8952, MAX8952_REG_CONTROL, 0x0);
}
max8952_write_reg(max8952, MAX8952_REG_MODE0,
(max8952_read_reg(max8952,
MAX8952_REG_MODE0) & 0xC0) |
(pdata->dvs_mode[0] & 0x3F));
max8952_write_reg(max8952, MAX8952_REG_MODE1,
(max8952_read_reg(max8952,
MAX8952_REG_MODE1) & 0xC0) |
(pdata->dvs_mode[1] & 0x3F));
max8952_write_reg(max8952, MAX8952_REG_MODE2,
(max8952_read_reg(max8952,
MAX8952_REG_MODE2) & 0xC0) |
(pdata->dvs_mode[2] & 0x3F));
max8952_write_reg(max8952, MAX8952_REG_MODE3,
(max8952_read_reg(max8952,
MAX8952_REG_MODE3) & 0xC0) |
(pdata->dvs_mode[3] & 0x3F));
max8952_write_reg(max8952, MAX8952_REG_SYNC,
(max8952_read_reg(max8952, MAX8952_REG_SYNC) & 0x3F) |
((pdata->sync_freq & 0x3) << 6));
max8952_write_reg(max8952, MAX8952_REG_RAMP,
(max8952_read_reg(max8952, MAX8952_REG_RAMP) & 0x1F) |
((pdata->ramp_speed & 0x7) << 5));
i2c_set_clientdata(client, max8952);
return 0;
}
static int tps51632_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct tps51632_regulator_platform_data *pdata;
struct regulator_dev *rdev;
struct tps51632_chip *tps;
int ret;
struct regulator_config config = { };
if (client->dev.of_node) {
const struct of_device_id *match;
match = of_match_device(of_match_ptr(tps51632_of_match),
&client->dev);
if (!match) {
dev_err(&client->dev, "Error: No device match found\n");
return -ENODEV;
}
}
tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
if (!tps)
return -ENOMEM;
tps->dev = &client->dev;
tps->desc.name = client->name;
tps->desc.id = 0;
tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
tps->desc.min_uV = TPS51632_MIN_VOLTAGE;
tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV;
tps->desc.linear_min_sel = TPS51632_MIN_VSEL;
tps->desc.n_voltages = TPS51632_MAX_VSEL + 1;
tps->desc.ops = &tps51632_dcdc_ops;
tps->desc.type = REGULATOR_VOLTAGE;
tps->desc.owner = THIS_MODULE;
pdata = dev_get_platdata(&client->dev);
if (!pdata && client->dev.of_node)
pdata = of_get_tps51632_platform_data(&client->dev, &tps->desc);
if (!pdata) {
dev_err(&client->dev, "No Platform data\n");
return -EINVAL;
}
if (pdata->enable_pwm_dvfs) {
if ((pdata->base_voltage_uV < TPS51632_MIN_VOLTAGE) ||
(pdata->base_voltage_uV > TPS51632_MAX_VOLTAGE)) {
dev_err(&client->dev, "Invalid base_voltage_uV setting\n");
return -EINVAL;
}
if ((pdata->max_voltage_uV) &&
((pdata->max_voltage_uV < TPS51632_MIN_VOLTAGE) ||
(pdata->max_voltage_uV > TPS51632_MAX_VOLTAGE))) {
dev_err(&client->dev, "Invalid max_voltage_uV setting\n");
return -EINVAL;
}
}
if (pdata->enable_pwm_dvfs)
tps->desc.vsel_reg = TPS51632_VOLTAGE_BASE_REG;
else
tps->desc.vsel_reg = TPS51632_VOLTAGE_SELECT_REG;
tps->desc.vsel_mask = TPS51632_VOUT_MASK;
tps->regmap = devm_regmap_init_i2c(client, &tps51632_regmap_config);
if (IS_ERR(tps->regmap)) {
ret = PTR_ERR(tps->regmap);
dev_err(&client->dev, "regmap init failed, err %d\n", ret);
return ret;
}
i2c_set_clientdata(client, tps);
ret = tps51632_init_dcdc(tps, pdata);
if (ret < 0) {
dev_err(tps->dev, "Init failed, err = %d\n", ret);
return ret;
}
/* Register the regulators */
config.dev = &client->dev;
config.init_data = pdata->reg_init_data;
config.driver_data = tps;
config.regmap = tps->regmap;
config.of_node = client->dev.of_node;
rdev = devm_regulator_register(&client->dev, &tps->desc, &config);
if (IS_ERR(rdev)) {
dev_err(tps->dev, "regulator register failed\n");
return PTR_ERR(rdev);
}
tps->rdev = rdev;
return 0;
}
static int tps6586x_regulator_probe(struct platform_device *pdev)
{
struct tps6586x_regulator *ri = NULL;
struct regulator_config config = { };
struct regulator_dev **rdev;
struct regulator_init_data *reg_data;
struct tps6586x_platform_data *pdata;
struct of_regulator_match *tps6586x_reg_matches = NULL;
int version;
int id;
int err;
dev_dbg(&pdev->dev, "Probing regulator\n");
pdata = dev_get_platdata(pdev->dev.parent);
if ((!pdata) && (pdev->dev.parent->of_node))
pdata = tps6586x_parse_regulator_dt(pdev,
&tps6586x_reg_matches);
if (!pdata) {
dev_err(&pdev->dev, "Platform data not available, exiting\n");
return -ENODEV;
}
rdev = devm_kzalloc(&pdev->dev, TPS6586X_ID_MAX_REGULATOR *
sizeof(*rdev), GFP_KERNEL);
if (!rdev) {
dev_err(&pdev->dev, "Mmemory alloc failed\n");
return -ENOMEM;
}
version = tps6586x_get_version(pdev->dev.parent);
for (id = 0; id < TPS6586X_ID_MAX_REGULATOR; ++id) {
reg_data = pdata->reg_init_data[id];
ri = find_regulator_info(id, version);
if (!ri) {
dev_err(&pdev->dev, "invalid regulator ID specified\n");
return -EINVAL;
}
err = tps6586x_regulator_preinit(pdev->dev.parent, ri);
if (err) {
dev_err(&pdev->dev,
"regulator %d preinit failed, e %d\n", id, err);
return err;
}
config.dev = pdev->dev.parent;
config.init_data = reg_data;
config.driver_data = ri;
if (tps6586x_reg_matches)
config.of_node = tps6586x_reg_matches[id].of_node;
rdev[id] = devm_regulator_register(&pdev->dev, &ri->desc,
&config);
if (IS_ERR(rdev[id])) {
dev_err(&pdev->dev, "failed to register regulator %s\n",
ri->desc.name);
return PTR_ERR(rdev[id]);
}
if (reg_data) {
err = tps6586x_regulator_set_slew_rate(pdev, id,
reg_data);
if (err < 0) {
dev_err(&pdev->dev,
"Slew rate config failed, e %d\n", err);
return err;
}
}
}
platform_set_drvdata(pdev, rdev);
return 0;
}
template = match->data;
id = template->id;
init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
®ulators[id]);
platform_set_drvdata(pdev, tps);
tps->info[id] = &tps65218_pmic_regs[id];
config.dev = &pdev->dev;
config.init_data = init_data;
config.driver_data = tps;
config.regmap = tps->regmap;
config.of_node = pdev->dev.of_node;
rdev = devm_regulator_register(&pdev->dev, ®ulators[id], &config);
if (IS_ERR(rdev)) {
dev_err(tps->dev, "failed to register %s regulator\n",
pdev->name);
return PTR_ERR(rdev);
}
return 0;
}
static struct platform_driver tps65218_regulator_driver = {
.driver = {
.name = "tps65218-pmic",
.of_match_table = tps65218_of_match,
},
.probe = tps65218_regulator_probe,
/**
* ti_abb_probe() - Initialize an ABB ldo instance
* @pdev: ABB platform device
*
* Initializes an individual ABB LDO for required Body-Bias. ABB is used to
* addional bias supply to SoC modules for power savings or mandatory stability
* configuration at certain Operating Performance Points(OPPs).
*
* Return: 0 on success or appropriate error value when fails
*/
static int ti_abb_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
const struct of_device_id *match;
struct resource *res;
struct ti_abb *abb;
struct regulator_init_data *initdata = NULL;
struct regulator_dev *rdev = NULL;
struct regulator_desc *desc;
struct regulation_constraints *c;
struct regulator_config config = { };
char *pname;
int ret = 0;
match = of_match_device(ti_abb_of_match, dev);
if (!match) {
/* We do not expect this to happen */
dev_err(dev, "%s: Unable to match device\n", __func__);
return -ENODEV;
}
if (!match->data) {
dev_err(dev, "%s: Bad data in match\n", __func__);
return -EINVAL;
}
abb = devm_kzalloc(dev, sizeof(struct ti_abb), GFP_KERNEL);
if (!abb)
return -ENOMEM;
abb->regs = match->data;
/* Map ABB resources */
if (abb->regs->setup_off || abb->regs->control_off) {
pname = "base-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
abb->base = devm_ioremap_resource(dev, res);
if (IS_ERR(abb->base))
return PTR_ERR(abb->base);
abb->setup_reg = abb->base + abb->regs->setup_off;
abb->control_reg = abb->base + abb->regs->control_off;
} else {
pname = "control-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
abb->control_reg = devm_ioremap_resource(dev, res);
if (IS_ERR(abb->control_reg))
return PTR_ERR(abb->control_reg);
pname = "setup-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
abb->setup_reg = devm_ioremap_resource(dev, res);
if (IS_ERR(abb->setup_reg))
return PTR_ERR(abb->setup_reg);
}
pname = "int-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
if (!res) {
dev_err(dev, "Missing '%s' IO resource\n", pname);
return -ENODEV;
}
/*
* We may have shared interrupt register offsets which are
* write-1-to-clear between domains ensuring exclusivity.
*/
abb->int_base = devm_ioremap_nocache(dev, res->start,
resource_size(res));
if (!abb->int_base) {
dev_err(dev, "Unable to map '%s'\n", pname);
return -ENOMEM;
}
/* Map Optional resources */
pname = "efuse-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
if (!res) {
dev_dbg(dev, "Missing '%s' IO resource\n", pname);
ret = -ENODEV;
goto skip_opt;
}
/*
* We may have shared efuse register offsets which are read-only
* between domains
*/
abb->efuse_base = devm_ioremap_nocache(dev, res->start,
resource_size(res));
if (!abb->efuse_base) {
dev_err(dev, "Unable to map '%s'\n", pname);
return -ENOMEM;
}
pname = "ldo-address";
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, pname);
if (!res) {
dev_dbg(dev, "Missing '%s' IO resource\n", pname);
ret = -ENODEV;
goto skip_opt;
}
abb->ldo_base = devm_ioremap_resource(dev, res);
if (IS_ERR(abb->ldo_base))
return PTR_ERR(abb->ldo_base);
/* IF ldo_base is set, the following are mandatory */
pname = "ti,ldovbb-override-mask";
ret =
of_property_read_u32(pdev->dev.of_node, pname,
&abb->ldovbb_override_mask);
if (ret) {
dev_err(dev, "Missing '%s' (%d)\n", pname, ret);
return ret;
}
if (!abb->ldovbb_override_mask) {
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
return -EINVAL;
}
pname = "ti,ldovbb-vset-mask";
ret =
of_property_read_u32(pdev->dev.of_node, pname,
&abb->ldovbb_vset_mask);
if (ret) {
dev_err(dev, "Missing '%s' (%d)\n", pname, ret);
return ret;
}
if (!abb->ldovbb_vset_mask) {
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
return -EINVAL;
}
skip_opt:
pname = "ti,tranxdone-status-mask";
ret =
of_property_read_u32(pdev->dev.of_node, pname,
&abb->txdone_mask);
if (ret) {
dev_err(dev, "Missing '%s' (%d)\n", pname, ret);
return ret;
}
if (!abb->txdone_mask) {
dev_err(dev, "Invalid property:'%s' set as 0!\n", pname);
return -EINVAL;
}
initdata = of_get_regulator_init_data(dev, pdev->dev.of_node,
&abb->rdesc);
if (!initdata) {
dev_err(dev, "%s: Unable to alloc regulator init data\n",
__func__);
return -ENOMEM;
}
/* init ABB opp_sel table */
ret = ti_abb_init_table(dev, abb, initdata);
if (ret)
return ret;
/* init ABB timing */
ret = ti_abb_init_timings(dev, abb);
if (ret)
return ret;
desc = &abb->rdesc;
desc->name = dev_name(dev);
desc->owner = THIS_MODULE;
desc->type = REGULATOR_VOLTAGE;
desc->ops = &ti_abb_reg_ops;
c = &initdata->constraints;
if (desc->n_voltages > 1)
c->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE;
c->always_on = true;
config.dev = dev;
config.init_data = initdata;
config.driver_data = abb;
config.of_node = pdev->dev.of_node;
rdev = devm_regulator_register(dev, desc, &config);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(dev, "%s: failed to register regulator(%d)\n",
__func__, ret);
return ret;
}
platform_set_drvdata(pdev, rdev);
/* Enable the ldo if not already done by bootloader */
ti_abb_rmw(abb->regs->sr2_en_mask, 1, abb->setup_reg);
return 0;
}
static int max1586_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
struct max1586_platform_data *pdata, pdata_of;
struct regulator_config config = { };
struct max1586_data *max1586;
int i, id, ret;
const struct of_device_id *match;
pdata = dev_get_platdata(&client->dev);
if (client->dev.of_node && !pdata) {
match = of_match_device(of_match_ptr(max1586_of_match),
&client->dev);
if (!match) {
dev_err(&client->dev, "Error: No device match found\n");
return -ENODEV;
}
ret = of_get_max1586_platform_data(&client->dev, &pdata_of);
if (ret < 0)
return ret;
pdata = &pdata_of;
}
max1586 = devm_kzalloc(&client->dev, sizeof(struct max1586_data),
GFP_KERNEL);
if (!max1586)
return -ENOMEM;
max1586->client = client;
if (!pdata->v3_gain)
return -EINVAL;
max1586->min_uV = MAX1586_V3_MIN_UV / 1000 * pdata->v3_gain / 1000;
max1586->max_uV = MAX1586_V3_MAX_UV / 1000 * pdata->v3_gain / 1000;
/* Set curr_sel to default voltage on power-up */
max1586->v3_curr_sel = 24; /* 1.3V */
max1586->v6_curr_sel = 0;
for (i = 0; i < pdata->num_subdevs && i <= MAX1586_V6; i++) {
struct regulator_dev *rdev;
id = pdata->subdevs[i].id;
if (!pdata->subdevs[i].platform_data)
continue;
if (id < MAX1586_V3 || id > MAX1586_V6) {
dev_err(&client->dev, "invalid regulator id %d\n", id);
return -EINVAL;
}
if (id == MAX1586_V3) {
max1586_reg[id].min_uV = max1586->min_uV;
max1586_reg[id].uV_step =
(max1586->max_uV - max1586->min_uV) /
MAX1586_V3_MAX_VSEL;
}
config.dev = &client->dev;
config.init_data = pdata->subdevs[i].platform_data;
config.driver_data = max1586;
rdev = devm_regulator_register(&client->dev,
&max1586_reg[id], &config);
if (IS_ERR(rdev)) {
dev_err(&client->dev, "failed to register %s\n",
max1586_reg[id].name);
return PTR_ERR(rdev);
}
}
i2c_set_clientdata(client, max1586);
dev_info(&client->dev, "Maxim 1586 regulator driver loaded\n");
return 0;
}
static int palmas_smps_registration(struct palmas_pmic *pmic,
struct palmas_pmic_driver_data *ddata,
struct palmas_pmic_platform_data *pdata,
const char *pdev_name,
struct regulator_config config)
{
int id, ret;
unsigned int addr, reg;
struct regulator_dev *rdev;
struct palmas_reg_init *reg_init;
struct palmas_regs_info *rinfo;
struct regulator_desc *desc;
for (id = ddata->smps_start; id <= ddata->smps_end; id++) {
bool ramp_delay_support = false;
/*
* Miss out regulators which are not available due
* to slaving configurations.
*/
switch (id) {
case PALMAS_REG_SMPS12:
case PALMAS_REG_SMPS3:
if (pmic->smps123)
continue;
if (id == PALMAS_REG_SMPS12)
ramp_delay_support = true;
break;
case PALMAS_REG_SMPS123:
if (!pmic->smps123)
continue;
ramp_delay_support = true;
break;
case PALMAS_REG_SMPS45:
case PALMAS_REG_SMPS7:
if (pmic->smps457)
continue;
if (id == PALMAS_REG_SMPS45)
ramp_delay_support = true;
break;
case PALMAS_REG_SMPS457:
if (!pmic->smps457)
continue;
ramp_delay_support = true;
break;
case PALMAS_REG_SMPS10_OUT1:
case PALMAS_REG_SMPS10_OUT2:
if (!PALMAS_PMIC_HAS(pmic->palmas, SMPS10_BOOST))
continue;
}
rinfo = &ddata->palmas_regs_info[id];
desc = &pmic->desc[id];
if ((id == PALMAS_REG_SMPS6) || (id == PALMAS_REG_SMPS8))
ramp_delay_support = true;
if (ramp_delay_support) {
addr = rinfo->tstep_addr;
ret = palmas_smps_read(pmic->palmas, addr, ®);
if (ret < 0) {
dev_err(pmic->dev,
"reading TSTEP reg failed: %d\n", ret);
return ret;
}
desc->ramp_delay = palmas_smps_ramp_delay[reg & 0x3];
pmic->ramp_delay[id] = desc->ramp_delay;
}
/* Initialise sleep/init values from platform data */
if (pdata && pdata->reg_init[id]) {
reg_init = pdata->reg_init[id];
ret = palmas_smps_init(pmic->palmas, id, reg_init);
if (ret)
return ret;
} else {
reg_init = NULL;
}
/* Register the regulators */
desc->name = rinfo->name;
desc->id = id;
switch (id) {
case PALMAS_REG_SMPS10_OUT1:
case PALMAS_REG_SMPS10_OUT2:
desc->n_voltages = PALMAS_SMPS10_NUM_VOLTAGES;
desc->ops = &palmas_ops_smps10;
desc->vsel_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
PALMAS_SMPS10_CTRL);
desc->vsel_mask = SMPS10_VSEL;
desc->enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
PALMAS_SMPS10_CTRL);
if (id == PALMAS_REG_SMPS10_OUT1)
desc->enable_mask = SMPS10_SWITCH_EN;
else
desc->enable_mask = SMPS10_BOOST_EN;
desc->bypass_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
PALMAS_SMPS10_CTRL);
desc->bypass_mask = SMPS10_BYPASS_EN;
desc->min_uV = 3750000;
desc->uV_step = 1250000;
break;
default:
/*
* Read and store the RANGE bit for later use
* This must be done before regulator is probed,
* otherwise we error in probe with unsupportable
* ranges. Read the current smps mode for later use.
*/
addr = rinfo->vsel_addr;
desc->n_linear_ranges = 3;
ret = palmas_smps_read(pmic->palmas, addr, ®);
if (ret)
return ret;
if (reg & PALMAS_SMPS12_VOLTAGE_RANGE)
pmic->range[id] = 1;
if (pmic->range[id])
desc->linear_ranges = smps_high_ranges;
else
desc->linear_ranges = smps_low_ranges;
if (reg_init && reg_init->roof_floor)
desc->ops = &palmas_ops_ext_control_smps;
else
desc->ops = &palmas_ops_smps;
desc->n_voltages = PALMAS_SMPS_NUM_VOLTAGES;
desc->vsel_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
rinfo->vsel_addr);
desc->vsel_mask = PALMAS_SMPS12_VOLTAGE_VSEL_MASK;
/* Read the smps mode for later use. */
addr = rinfo->ctrl_addr;
ret = palmas_smps_read(pmic->palmas, addr, ®);
if (ret)
return ret;
pmic->current_reg_mode[id] = reg &
PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
desc->enable_reg = PALMAS_BASE_TO_REG(PALMAS_SMPS_BASE,
rinfo->ctrl_addr);
desc->enable_mask = PALMAS_SMPS12_CTRL_MODE_ACTIVE_MASK;
/* set_mode overrides this value */
desc->enable_val = SMPS_CTRL_MODE_ON;
}
desc->type = REGULATOR_VOLTAGE;
desc->owner = THIS_MODULE;
if (pdata)
config.init_data = pdata->reg_data[id];
else
config.init_data = NULL;
desc->supply_name = rinfo->sname;
config.of_node = ddata->palmas_matches[id].of_node;
rdev = devm_regulator_register(pmic->dev, desc, &config);
if (IS_ERR(rdev)) {
dev_err(pmic->dev,
"failed to register %s regulator\n",
pdev_name);
return PTR_ERR(rdev);
}
/* Save regulator for cleanup */
pmic->rdev[id] = rdev;
}
return 0;
}
static int axp20x_regulator_probe(struct platform_device *pdev)
{
struct regulator_dev *rdev;
struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
const struct regulator_desc *regulators;
struct regulator_config config = {
.dev = pdev->dev.parent,
.regmap = axp20x->regmap,
.driver_data = axp20x,
};
int ret, i, nregulators;
u32 workmode;
switch (axp20x->variant) {
case AXP202_ID:
case AXP209_ID:
regulators = axp20x_regulators;
nregulators = AXP20X_REG_ID_MAX;
break;
case AXP221_ID:
regulators = axp22x_regulators;
nregulators = AXP22X_REG_ID_MAX;
break;
default:
dev_err(&pdev->dev, "Unsupported AXP variant: %ld\n",
axp20x->variant);
return -EINVAL;
}
/* This only sets the dcdc freq. Ignore any errors */
axp20x_regulator_parse_dt(pdev);
for (i = 0; i < nregulators; i++) {
rdev = devm_regulator_register(&pdev->dev, ®ulators[i],
&config);
if (IS_ERR(rdev)) {
dev_err(&pdev->dev, "Failed to register %s\n",
regulators[i].name);
return PTR_ERR(rdev);
}
ret = of_property_read_u32(rdev->dev.of_node,
"x-powers,dcdc-workmode",
&workmode);
if (!ret) {
if (axp20x_set_dcdc_workmode(rdev, i, workmode))
dev_err(&pdev->dev, "Failed to set workmode on %s\n",
rdev->desc->name);
}
}
return 0;
}
static struct platform_driver axp20x_regulator_driver = {
.probe = axp20x_regulator_probe,
.driver = {
.name = "axp20x-regulator",
},
};
module_platform_driver(axp20x_regulator_driver);
MODULE_LICENSE("GPL v2");
MODULE_AUTHOR("Carlo Caione <*****@*****.**>");
MODULE_DESCRIPTION("Regulator Driver for AXP20X PMIC");
static int palmas_ldo_registration(struct palmas_pmic *pmic,
struct palmas_pmic_driver_data *ddata,
struct palmas_pmic_platform_data *pdata,
const char *pdev_name,
struct regulator_config config)
{
int id, ret;
struct regulator_dev *rdev;
struct palmas_reg_init *reg_init;
struct palmas_regs_info *rinfo;
struct regulator_desc *desc;
for (id = ddata->ldo_begin; id < ddata->max_reg; id++) {
if (pdata && pdata->reg_init[id])
reg_init = pdata->reg_init[id];
else
reg_init = NULL;
rinfo = &ddata->palmas_regs_info[id];
/* Miss out regulators which are not available due
* to alternate functions.
*/
/* Register the regulators */
desc = &pmic->desc[id];
desc->name = rinfo->name;
desc->id = id;
desc->type = REGULATOR_VOLTAGE;
desc->owner = THIS_MODULE;
if (id < PALMAS_REG_REGEN1) {
desc->n_voltages = PALMAS_LDO_NUM_VOLTAGES;
if (reg_init && reg_init->roof_floor)
desc->ops = &palmas_ops_ext_control_ldo;
else
desc->ops = &palmas_ops_ldo;
desc->min_uV = 900000;
desc->uV_step = 50000;
desc->linear_min_sel = 1;
desc->enable_time = 500;
desc->vsel_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
rinfo->vsel_addr);
desc->vsel_mask = PALMAS_LDO1_VOLTAGE_VSEL_MASK;
desc->enable_reg = PALMAS_BASE_TO_REG(PALMAS_LDO_BASE,
rinfo->ctrl_addr);
desc->enable_mask = PALMAS_LDO1_CTRL_MODE_ACTIVE;
/* Check if LDO8 is in tracking mode or not */
if (pdata && (id == PALMAS_REG_LDO8) &&
pdata->enable_ldo8_tracking) {
palmas_enable_ldo8_track(pmic->palmas);
desc->min_uV = 450000;
desc->uV_step = 25000;
}
/* LOD6 in vibrator mode will have enable time 2000us */
if (pdata && pdata->ldo6_vibrator &&
(id == PALMAS_REG_LDO6))
desc->enable_time = 2000;
} else {
if (!ddata->has_regen3 && id == PALMAS_REG_REGEN3)
continue;
desc->n_voltages = 1;
if (reg_init && reg_init->roof_floor)
desc->ops = &palmas_ops_ext_control_extreg;
else
desc->ops = &palmas_ops_extreg;
desc->enable_reg =
PALMAS_BASE_TO_REG(PALMAS_RESOURCE_BASE,
rinfo->ctrl_addr);
desc->enable_mask = PALMAS_REGEN1_CTRL_MODE_ACTIVE;
}
if (pdata)
config.init_data = pdata->reg_data[id];
else
config.init_data = NULL;
desc->supply_name = rinfo->sname;
config.of_node = ddata->palmas_matches[id].of_node;
rdev = devm_regulator_register(pmic->dev, desc, &config);
if (IS_ERR(rdev)) {
dev_err(pmic->dev,
"failed to register %s regulator\n",
pdev_name);
return PTR_ERR(rdev);
}
/* Save regulator for cleanup */
pmic->rdev[id] = rdev;
/* Initialise sleep/init values from platform data */
if (pdata) {
reg_init = pdata->reg_init[id];
if (reg_init) {
if (id <= ddata->ldo_end)
ret = palmas_ldo_init(pmic->palmas, id,
reg_init);
else
ret = palmas_extreg_init(pmic->palmas,
id, reg_init);
if (ret)
return ret;
}
}
}
return 0;
}
static int pwm_regulator_probe(struct platform_device *pdev)
{
struct pwm_regulator_data *drvdata;
struct property *prop;
struct regulator_dev *regulator;
struct regulator_config config = { };
struct device_node *np = pdev->dev.of_node;
int length, ret;
if (!np) {
dev_err(&pdev->dev, "Device Tree node missing\n");
return -EINVAL;
}
drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
if (!drvdata)
return -ENOMEM;
memcpy(&drvdata->desc, &pwm_regulator_desc, sizeof(pwm_regulator_desc));
/* determine the number of voltage-table */
prop = of_find_property(np, "voltage-table", &length);
if (!prop) {
dev_err(&pdev->dev, "No voltage-table\n");
return -EINVAL;
}
if ((length < sizeof(*drvdata->duty_cycle_table)) ||
(length % sizeof(*drvdata->duty_cycle_table))) {
dev_err(&pdev->dev, "voltage-table length(%d) is invalid\n",
length);
return -EINVAL;
}
drvdata->desc.n_voltages = length / sizeof(*drvdata->duty_cycle_table);
drvdata->duty_cycle_table = devm_kzalloc(&pdev->dev,
length, GFP_KERNEL);
if (!drvdata->duty_cycle_table)
return -ENOMEM;
/* read voltage table from DT property */
ret = of_property_read_u32_array(np, "voltage-table",
(u32 *)drvdata->duty_cycle_table,
length / sizeof(u32));
if (ret < 0) {
dev_err(&pdev->dev, "read voltage-table failed\n");
return ret;
}
config.init_data = of_get_regulator_init_data(&pdev->dev, np,
&drvdata->desc);
if (!config.init_data)
return -ENOMEM;
config.of_node = np;
config.dev = &pdev->dev;
config.driver_data = drvdata;
drvdata->pwm = devm_pwm_get(&pdev->dev, NULL);
if (IS_ERR(drvdata->pwm)) {
dev_err(&pdev->dev, "Failed to get PWM\n");
return PTR_ERR(drvdata->pwm);
}
regulator = devm_regulator_register(&pdev->dev,
&drvdata->desc, &config);
if (IS_ERR(regulator)) {
dev_err(&pdev->dev, "Failed to register regulator %s\n",
drvdata->desc.name);
return PTR_ERR(regulator);
}
return 0;
}
static int ltc3676_regulator_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev = &client->dev;
struct regulator_init_data *init_data = dev_get_platdata(dev);
struct regulator_desc *descs;
struct ltc3676 *ltc3676;
int i, ret;
ltc3676 = devm_kzalloc(dev, sizeof(*ltc3676), GFP_KERNEL);
if (!ltc3676)
return -ENOMEM;
i2c_set_clientdata(client, ltc3676);
ltc3676->dev = dev;
descs = ltc3676->regulator_descs;
memcpy(descs, ltc3676_regulators, sizeof(ltc3676_regulators));
descs[LTC3676_LDO3].fixed_uV = 1800000; /* LDO3 is fixed 1.8V */
ltc3676->regmap = devm_regmap_init_i2c(client, <c3676_regmap_config);
if (IS_ERR(ltc3676->regmap)) {
ret = PTR_ERR(ltc3676->regmap);
dev_err(dev, "failed to initialize regmap: %d\n", ret);
return ret;
}
for (i = 0; i < LTC3676_NUM_REGULATORS; i++) {
struct regulator_desc *desc = <c3676->regulator_descs[i];
struct regulator_config config = { };
if (init_data)
config.init_data = &init_data[i];
config.dev = dev;
config.driver_data = ltc3676;
ltc3676->regulators[i] = devm_regulator_register(dev, desc,
&config);
if (IS_ERR(ltc3676->regulators[i])) {
ret = PTR_ERR(ltc3676->regulators[i]);
dev_err(dev, "failed to register regulator %s: %d\n",
desc->name, ret);
return ret;
}
}
regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
if (client->irq) {
ret = devm_request_threaded_irq(dev, client->irq, NULL,
ltc3676_isr,
IRQF_TRIGGER_LOW | IRQF_ONESHOT,
client->name, ltc3676);
if (ret) {
dev_err(dev, "Failed to request IRQ: %d\n", ret);
return ret;
}
}
return 0;
}
static int bcm590xx_probe(struct platform_device *pdev)
{
struct bcm590xx *bcm590xx = dev_get_drvdata(pdev->dev.parent);
struct bcm590xx_board *pmu_data = NULL;
struct bcm590xx_reg *pmu;
struct regulator_config config = { };
struct bcm590xx_info *info;
struct regulator_init_data *reg_data;
struct regulator_dev *rdev;
struct of_regulator_match *bcm590xx_reg_matches = NULL;
int i;
pmu_data = bcm590xx_parse_dt_reg_data(pdev,
&bcm590xx_reg_matches);
pmu = devm_kzalloc(&pdev->dev, sizeof(*pmu), GFP_KERNEL);
if (!pmu) {
dev_err(&pdev->dev, "Memory allocation failed for pmu\n");
return -ENOMEM;
}
pmu->mfd = bcm590xx;
platform_set_drvdata(pdev, pmu);
pmu->desc = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS *
sizeof(struct regulator_desc), GFP_KERNEL);
if (!pmu->desc) {
dev_err(&pdev->dev, "Memory alloc fails for desc\n");
return -ENOMEM;
}
pmu->info = devm_kzalloc(&pdev->dev, BCM590XX_NUM_REGS *
sizeof(struct bcm590xx_info *), GFP_KERNEL);
if (!pmu->info) {
dev_err(&pdev->dev, "Memory alloc fails for info\n");
return -ENOMEM;
}
info = bcm590xx_regs;
for (i = 0; i < BCM590XX_NUM_REGS; i++, info++) {
if (pmu_data)
reg_data = pmu_data->bcm590xx_pmu_init_data[i];
else
reg_data = NULL;
/* Register the regulators */
pmu->info[i] = info;
pmu->desc[i].name = info->name;
pmu->desc[i].supply_name = info->vin_name;
pmu->desc[i].id = i;
pmu->desc[i].volt_table = info->volt_table;
pmu->desc[i].n_voltages = info->n_voltages;
pmu->desc[i].linear_ranges = info->linear_ranges;
pmu->desc[i].n_linear_ranges = info->n_linear_ranges;
if (BCM590XX_REG_IS_LDO(i)) {
pmu->desc[i].ops = &bcm590xx_ops_ldo;
pmu->desc[i].vsel_mask = BCM590XX_LDO_VSEL_MASK;
} else {
pmu->desc[i].ops = &bcm590xx_ops_dcdc;
pmu->desc[i].vsel_mask = BCM590XX_SR_VSEL_MASK;
}
pmu->desc[i].vsel_reg = bcm590xx_get_vsel_register(i);
pmu->desc[i].enable_is_inverted = true;
pmu->desc[i].enable_mask = BCM590XX_REG_ENABLE;
pmu->desc[i].enable_reg = bcm590xx_get_enable_register(i);
pmu->desc[i].type = REGULATOR_VOLTAGE;
pmu->desc[i].owner = THIS_MODULE;
config.dev = bcm590xx->dev;
config.init_data = reg_data;
config.driver_data = pmu;
config.regmap = bcm590xx->regmap;
if (bcm590xx_reg_matches)
config.of_node = bcm590xx_reg_matches[i].of_node;
rdev = devm_regulator_register(&pdev->dev, &pmu->desc[i],
&config);
if (IS_ERR(rdev)) {
dev_err(bcm590xx->dev,
"failed to register %s regulator\n",
pdev->name);
return PTR_ERR(rdev);
}
}
return 0;
}
static int tps65132_probe(struct i2c_client *client,
const struct i2c_device_id *client_id)
{
struct device *dev = &client->dev;
struct tps65132_regulator_pdata *rpdata;
struct regulator_config config = { };
struct regulator_desc *rdesc;
struct tps65132_regulator *tps;
int id;
int ret;
tps = devm_kzalloc(dev, sizeof(*tps), GFP_KERNEL);
if (!tps) {
dev_err(dev, "memory alloc failed\n");
return -ENOMEM;
}
ret = tps65132_get_regulator_dt_data(dev, tps);
if (ret == -EPROBE_DEFER) {
dev_err(dev, "Probe deffered\n");
return ret;
} else if (ret < 0) {
dev_err(dev, "Reading data from DT failed: %d\n", ret);
return ret;
}
tps->rmap = devm_regmap_init_i2c(client, &tps65132_regmap_config);
if (IS_ERR(tps->rmap)) {
ret = PTR_ERR(tps->rmap);
dev_err(dev, "regmap init failed: %d\n", ret);
return ret;
}
i2c_set_clientdata(client, tps);
tps->dev = dev;
for (id = 0; id < TPS65132_MAX_REGULATORS; ++id) {
rdesc = &tps65132_regs_desc[id];
tps->rdesc[id] = rdesc;
rpdata = &tps->reg_pdata[id];
config.regmap = tps->rmap;
config.dev = dev;
config.init_data = rpdata->ridata;
config.driver_data = tps;
config.of_node = tps65132_regulator_matches[id].of_node;
if (gpio_is_valid(rpdata->enable_gpio)) {
config.ena_gpio = rpdata->enable_gpio;
if (rpdata->ridata &&
(rpdata->ridata->constraints.always_on ||
rpdata->ridata->constraints.boot_on))
config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
}
if (gpio_is_valid(rpdata->active_discharge_gpio)) {
ret = devm_gpio_request_one(dev,
rpdata->active_discharge_gpio,
GPIOF_OUT_INIT_LOW, rdesc->name);
if (ret < 0) {
dev_err(dev,
"act dis gpio req failed for %s: %d\n",
rdesc->name, ret);
return ret;
}
} else {
dev_info(dev, "No active discharge gpio for regulator %s\n",
rdesc->name);
}
tps->rdev[id] = devm_regulator_register(dev, rdesc, &config);
if (IS_ERR(tps->rdev[id])) {
ret = PTR_ERR(tps->rdev[id]);
dev_err(dev, "regulator %s register failed: %d\n",
rdesc->name, ret);
return ret;
}
}
return 0;
}
static int max8973_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct max8973_regulator_platform_data *pdata;
struct regulator_config config = { };
struct regulator_dev *rdev;
struct max8973_chip *max;
int ret;
pdata = dev_get_platdata(&client->dev);
if (!pdata && !client->dev.of_node) {
dev_err(&client->dev, "No Platform data");
return -EIO;
}
max = devm_kzalloc(&client->dev, sizeof(*max), GFP_KERNEL);
if (!max)
return -ENOMEM;
max->regmap = devm_regmap_init_i2c(client, &max8973_regmap_config);
if (IS_ERR(max->regmap)) {
ret = PTR_ERR(max->regmap);
dev_err(&client->dev, "regmap init failed, err %d\n", ret);
return ret;
}
i2c_set_clientdata(client, max);
max->ops = max8973_dcdc_ops;
max->dev = &client->dev;
max->desc.name = id->name;
max->desc.id = 0;
max->desc.ops = &max->ops;
max->desc.type = REGULATOR_VOLTAGE;
max->desc.owner = THIS_MODULE;
max->desc.min_uV = MAX8973_MIN_VOLATGE;
max->desc.uV_step = MAX8973_VOLATGE_STEP;
max->desc.n_voltages = MAX8973_BUCK_N_VOLTAGE;
if (!pdata || !pdata->enable_ext_control) {
max->desc.enable_reg = MAX8973_VOUT;
max->desc.enable_mask = MAX8973_VOUT_ENABLE;
max->ops.enable = regulator_enable_regmap;
max->ops.disable = regulator_disable_regmap;
max->ops.is_enabled = regulator_is_enabled_regmap;
}
if (pdata) {
max->dvs_gpio = pdata->dvs_gpio;
max->enable_external_control = pdata->enable_ext_control;
max->curr_gpio_val = pdata->dvs_def_state;
max->curr_vout_reg = MAX8973_VOUT + pdata->dvs_def_state;
} else {
max->dvs_gpio = -EINVAL;
max->curr_vout_reg = MAX8973_VOUT;
}
max->lru_index[0] = max->curr_vout_reg;
if (gpio_is_valid(max->dvs_gpio)) {
int gpio_flags;
int i;
gpio_flags = (pdata->dvs_def_state) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW;
ret = devm_gpio_request_one(&client->dev, max->dvs_gpio,
gpio_flags, "max8973-dvs");
if (ret) {
dev_err(&client->dev,
"gpio_request for gpio %d failed, err = %d\n",
max->dvs_gpio, ret);
return ret;
}
max->valid_dvs_gpio = true;
/*
* Initialize the lru index with vout_reg id
* The index 0 will be most recently used and
* set with the max->curr_vout_reg */
for (i = 0; i < MAX8973_MAX_VOUT_REG; ++i)
max->lru_index[i] = i;
max->lru_index[0] = max->curr_vout_reg;
max->lru_index[max->curr_vout_reg] = 0;
} else {
max->valid_dvs_gpio = false;
}
if (pdata) {
ret = max8973_init_dcdc(max, pdata);
if (ret < 0) {
dev_err(max->dev, "Max8973 Init failed, err = %d\n", ret);
return ret;
}
}
config.dev = &client->dev;
config.init_data = pdata ? pdata->reg_init_data :
of_get_regulator_init_data(&client->dev, client->dev.of_node,
&max->desc);
config.driver_data = max;
config.of_node = client->dev.of_node;
config.regmap = max->regmap;
/* Register the regulators */
rdev = devm_regulator_register(&client->dev, &max->desc, &config);
if (IS_ERR(rdev)) {
ret = PTR_ERR(rdev);
dev_err(max->dev, "regulator register failed, err %d\n", ret);
return ret;
}
return 0;
}
static int arizona_ldo1_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
const struct regulator_desc *desc;
struct regulator_config config = { };
struct arizona_ldo1 *ldo1;
int ret;
arizona->external_dcvdd = false;
ldo1 = devm_kzalloc(&pdev->dev, sizeof(*ldo1), GFP_KERNEL);
if (!ldo1)
return -ENOMEM;
ldo1->arizona = arizona;
/*
* Since the chip usually supplies itself we provide some
* default init_data for it. This will be overridden with
* platform data if provided.
*/
switch (arizona->type) {
case WM5102:
case WM8997:
desc = &arizona_ldo1_hc;
ldo1->init_data = arizona_ldo1_dvfs;
break;
default:
desc = &arizona_ldo1;
ldo1->init_data = arizona_ldo1_default;
break;
}
ldo1->init_data.consumer_supplies = &ldo1->supply;
ldo1->supply.supply = "DCVDD";
ldo1->supply.dev_name = dev_name(arizona->dev);
config.dev = arizona->dev;
config.driver_data = ldo1;
config.regmap = arizona->regmap;
if (IS_ENABLED(CONFIG_OF)) {
if (!dev_get_platdata(arizona->dev)) {
ret = arizona_ldo1_of_get_pdata(arizona, &config);
if (ret < 0)
return ret;
}
}
config.ena_gpio = arizona->pdata.ldoena;
if (arizona->pdata.ldo1)
config.init_data = arizona->pdata.ldo1;
else
config.init_data = &ldo1->init_data;
/*
* LDO1 can only be used to supply DCVDD so if it has no
* consumers then DCVDD is supplied externally.
*/
if (config.init_data->num_consumer_supplies == 0)
arizona->external_dcvdd = true;
ldo1->regulator = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(ldo1->regulator)) {
ret = PTR_ERR(ldo1->regulator);
dev_err(arizona->dev, "Failed to register LDO1 supply: %d\n",
ret);
return ret;
}
of_node_put(config.of_node);
platform_set_drvdata(pdev, ldo1);
return 0;
}
static int arizona_micsupp_probe(struct platform_device *pdev)
{
struct arizona *arizona = dev_get_drvdata(pdev->dev.parent);
const struct regulator_desc *desc;
struct regulator_config config = { };
struct arizona_micsupp *micsupp;
int ret;
micsupp = devm_kzalloc(&pdev->dev, sizeof(*micsupp), GFP_KERNEL);
if (micsupp == NULL) {
dev_err(&pdev->dev, "Unable to allocate private data\n");
return -ENOMEM;
}
micsupp->arizona = arizona;
INIT_WORK(&micsupp->check_cp_work, arizona_micsupp_check_cp);
/*
* Since the chip usually supplies itself we provide some
* default init_data for it. This will be overridden with
* platform data if provided.
*/
switch (arizona->type) {
case WM5110:
desc = &arizona_micsupp_ext;
micsupp->init_data = arizona_micsupp_ext_default;
break;
default:
desc = &arizona_micsupp;
micsupp->init_data = arizona_micsupp_default;
break;
}
micsupp->init_data.consumer_supplies = &micsupp->supply;
micsupp->supply.supply = "MICVDD";
micsupp->supply.dev_name = dev_name(arizona->dev);
config.dev = arizona->dev;
config.driver_data = micsupp;
config.regmap = arizona->regmap;
if (arizona->pdata.micvdd)
config.init_data = arizona->pdata.micvdd;
else
config.init_data = &micsupp->init_data;
/* Default to regulated mode until the API supports bypass */
regmap_update_bits(arizona->regmap, ARIZONA_MIC_CHARGE_PUMP_1,
ARIZONA_CPMIC_BYPASS, 0);
micsupp->regulator = devm_regulator_register(&pdev->dev,
desc,
&config);
if (IS_ERR(micsupp->regulator)) {
ret = PTR_ERR(micsupp->regulator);
dev_err(arizona->dev, "Failed to register mic supply: %d\n",
ret);
return ret;
}
platform_set_drvdata(pdev, micsupp);
return 0;
}
