/**
* Clear all computed string, derivative and values
*/
inline void reset()
{
_string = std::string();
_derivatives.clear();
_isValueComputed = false;
doReset();
}
ResetWindow::ResetWindow()
{
clearCacheCheckBox = new QCheckBox(tr("Clear cache"));
clearCookiesCheckBox = new QCheckBox(tr("Clear cookies"));
clearHistoryCheckBox = new QCheckBox(tr("Clear browsing history"));
clearBookmarksCheckBox = new QCheckBox(tr("Clear bookmarks"));
clearPreferencesCheckBox = new QCheckBox(tr("Clear preferences"));
resetButton = new QPushButton(tr("Reset"));
closeButton = new QPushButton(tr("Close"));
buttonLayout = new QHBoxLayout;
mainLayout = new QVBoxLayout;
buttonLayout->addStretch();
buttonLayout->addWidget(resetButton);
buttonLayout->addWidget(closeButton);
mainLayout->addWidget(clearCacheCheckBox);
mainLayout->addWidget(clearCookiesCheckBox);
mainLayout->addWidget(clearHistoryCheckBox);
mainLayout->addWidget(clearBookmarksCheckBox);
mainLayout->addWidget(clearPreferencesCheckBox);
mainLayout->addLayout(buttonLayout);
mainLayout->setContentsMargins(5,25,5,5);
setLayout(mainLayout);
setTitle(tr("Reset Browser Settings"));
connect(resetButton,SIGNAL(clicked()),this,SLOT(doReset()));
connect(closeButton,SIGNAL(clicked()),this,SLOT(close()));
}
void ComputeWaterSimulation::initWaves(int numWaves)
{
mWaveScale = (float)mGridSize / MAX_GRID_SIZE;
// TODO: fix delete
//WaveSimRenderer::m_renderersCount = 0;
if (mWaves)
{
Wave::syncAllSimulationThreads();
for(uint32_t i = 0; i < mPrevNumWaves; i++)
{
delete mWaves[i];
}
delete [] mWaves;
}
mNumWaves = numWaves;
mWaves = new Wave*[numWaves];
for(int i=0; i<numWaves; i++)
{
mWaves[i] = new Wave(mGridSize, mGridSize, mSettings.Damping,
nv::vec4f(0.8f*rand()/(float)RAND_MAX, 0.8f*rand()/(float)RAND_MAX, 0.7f + 0.3f* rand()/(float)RAND_MAX, 0.5f),
createStopWatch());
//mWaves[i]->addRandomDisturbance((int)mSettings.Size, mSettings.Strength);
//for(int j=0; j<WaveSimRenderer::NUM_BUFFERS; j++)
//{
// mWaves[i]->updateBufferData();
//}
}
doReset();
}
// Reset should be OK in any state
status_t MediaRecorder::reset()
{
LOGV("reset");
if (mMediaRecorder == NULL) {
LOGE("media recorder is not initialized yet");
return INVALID_OPERATION;
}
doCleanUp();
status_t ret = UNKNOWN_ERROR;
switch(mCurrentState) {
case MEDIA_RECORDER_IDLE:
ret = OK;
break;
case MEDIA_RECORDER_RECORDING:
case MEDIA_RECORDER_DATASOURCE_CONFIGURED:
case MEDIA_RECORDER_PREPARED:
case MEDIA_RECORDER_ERROR: {
ret = doReset();
if (OK != ret) {
return ret; // No need to continue
}
} // Intentional fall through
case MEDIA_RECORDER_INITIALIZED:
ret = close();
break;
default: {
LOGE("Unexpected non-existing state: %d", mCurrentState);
break;
}
}
return ret;
}
status_t MediaRecorder::setCamera(const sp<ICamera>& camera, const sp<ICameraRecordingProxy>& proxy)
{
LOGV("setCamera(%p,%p)", camera.get(), proxy.get());
if(mMediaRecorder == NULL) {
LOGE("media recorder is not initialized yet");
return INVALID_OPERATION;
}
if (!(mCurrentState & MEDIA_RECORDER_IDLE)) {
LOGE("setCamera called in an invalid state(%d)", mCurrentState);
return INVALID_OPERATION;
}
status_t ret = mMediaRecorder->setCamera(camera, proxy);
if (ret == DEAD_OBJECT) {
ret = doReset();
if (OK == ret) {
ret = mMediaRecorder->setCamera(camera, proxy);
}
}
if (OK != ret) {
LOGV("setCamera failed: %d", ret);
mCurrentState = MEDIA_RECORDER_ERROR;
return ret;
}
return ret;
}
BSWScriptedAI::BSWScriptedAI(Creature* pCreature) : ScriptedAI(pCreature)
{
pMap = m_creature->GetMap();
if (pMap) currentDifficulty = pMap->GetDifficulty();
else currentDifficulty = RAID_DIFFICULTY_10MAN_NORMAL;
debug_log("BSW: Initializing BSWScriptedAI structure for creature %u difficulty %u",m_creature->GetEntry(),currentDifficulty);
doReset();
};
CurveWidget::CurveWidget( QWidget* parent ) : QWidget( parent )
{
CurveWidgetLayout = new QHBoxLayout(this);
CurveWidgetLayout->setMargin(5);
CurveWidgetLayout->setSpacing(5);
layout1 = new QVBoxLayout;
layout1->setMargin(0);
layout1->setSpacing(5);
invertButton = new QPushButton( this );
invertButton->setSizePolicy(QSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed));
invertButton->setIcon( IconManager::instance()->loadIcon("invert.png") );
invertButton->setIconSize(QSize(22, 22));
layout1->addWidget( invertButton );
resetButton = new QPushButton( this );
resetButton->setSizePolicy(QSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed));
resetButton->setIcon( IconManager::instance()->loadIcon("reload.png") );
resetButton->setIconSize(QSize(22, 22));
layout1->addWidget( resetButton );
linearButton = new QPushButton( this );
QIcon ic;
ic.addPixmap(IconManager::instance()->loadPixmap("curvebezier.png"), QIcon::Normal, QIcon::Off);
ic.addPixmap(IconManager::instance()->loadPixmap("curvelinear.png"), QIcon::Normal, QIcon::On);
linearButton->setIcon(ic);
linearButton->setCheckable( true );
linearButton->setChecked(false);
linearButton->setIconSize(QSize(22, 22));
linearButton->setSizePolicy(QSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed));
layout1->addWidget( linearButton );
spacer1 = new QSpacerItem( 2, 3, QSizePolicy::Minimum, QSizePolicy::Expanding );
layout1->addItem( spacer1 );
loadButton = new QPushButton( this );
loadButton->setIcon( IconManager::instance()->loadIcon("22/document-open.png") );
loadButton->setIconSize(QSize(22, 22));
loadButton->setSizePolicy(QSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed));
layout1->addWidget( loadButton );
saveButton = new QPushButton( this );
saveButton->setIcon( IconManager::instance()->loadIcon("22/document-save-as.png") );
saveButton->setIconSize(QSize(22, 22));
saveButton->setSizePolicy(QSizePolicy(QSizePolicy::Fixed, QSizePolicy::Fixed));
layout1->addWidget( saveButton );
CurveWidgetLayout->addLayout( layout1 );
cDisplay = new KCurve(this);
cDisplay->setMinimumSize( QSize( 150, 150 ) );
CurveWidgetLayout->addWidget( cDisplay );
languageChange();
connect(invertButton, SIGNAL(clicked()), this, SLOT(doInvert()));
connect(resetButton, SIGNAL(clicked()), this, SLOT(doReset()));
connect(linearButton, SIGNAL(clicked()), this, SLOT(doLinear()));
connect(loadButton, SIGNAL(clicked()), this, SLOT(doLoad()));
connect(saveButton, SIGNAL(clicked()), this, SLOT(doSave()));
}
int EDITAPI EDITDisconnect( void )
{
if( idInstance != 0 ) {
DdeUninitialize( idInstance );
idInstance = 0;
}
doReset();
return( TRUE );
}
/* write digital output register */
static void io_write_03F2() {
if (!GetBit(vfdc.data.dor, VFDC_DOR_NRS) && GetBit(vport.data.ioByte, VFDC_DOR_NRS)) {
SetMSRReadyWrite;
}
vfdc.data.dor = vport.data.ioByte;
if (!GetBit(vfdc.data.dor, VFDC_DOR_NRS)) {
doReset();
}
}
LDViewExportOption::LDViewExportOption(QWidget *parent,LDrawModelViewer *modelViewer,LDrawModelViewer::ExportType type)
:QDialog(parent),ExportOptionPanel(),
m_modelViewer(modelViewer),
m_exporter(NULL),
m_box(NULL),
m_origType(type)
{
setupUi(this);
connect( okButton, SIGNAL( clicked() ), this, SLOT( doOk() ) );
connect( cancelButton, SIGNAL( clicked() ), this, SLOT( doCancel() ) );
connect( resetButton, SIGNAL( clicked() ), this, SLOT( doReset() ) );
}
void BasicNetwork::reset(const id_size_t nNodes, const id_size_t nLinks,
const node_state_size_t nNodeStates, LinkStateCalculator* lsCalc)
{
if (lscOwn_)
delete lsCalc_;
if (lsCalc == 0)
{
lsCalc_ = new DefaultLinkStateCalculator(nNodeStates);
lscOwn_ = true;
}
else
lsCalc_ = lsCalc;
doReset(nNodes, nLinks, nNodeStates);
}
bool TreeComboFilterItemWidget::eventFilter(QObject *obj, QEvent *event)
{
if ((obj == _comboBox || obj==_deleteBtn) && event->type() == QEvent::KeyPress ) {
QKeyEvent *ke = static_cast<QKeyEvent*>(event);
if (ke->key() == Qt::Key_Delete && ke->modifiers() == 0) {
if(_deleteBtn)
deleteItem();
}
else if(ke->key() == Qt::Key_Backspace && ke->modifiers() == 0){
doReset();
}
}
return FilterItemWidget::eventFilter(obj, event);
}
void ComputeWaterSimulation::draw(void)
{
glClearColor( 0.25f, 0.25f, 0.25f, 1.0f);
glClear( GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT);
if (mReset) {
mReset = false;
doReset();
mTweakBar->syncValues();
}
runWaterSimulation();
drawWater();
CHECK_GL_ERROR();
}
HDDEDATA __export FAR PASCAL DdeCallback( UINT wType, UINT wFmt, HCONV hConv,
HSZ hszTopic, HSZ hszItem, HDDEDATA hData, DWORD dwData1,
DWORD dwData2 )
{
wFmt = wFmt;
hConv = hConv;
hszTopic = hszTopic;
hszItem = hszItem;
hData = hData;
dwData1 = dwData1;
dwData2 = dwData2;
switch( wType ) {
case XTYP_DISCONNECT:
// user may have killed vi, or maybe this is a response to
// our ddeuninitialize. either way, reset for next connect
if( bConnected ) {
doReset();
}
return( NULL );
}
return( NULL );
}
void BoxContainerItem::mouseButtonPressed(Qt::ButtonState state)
{
int button;
if(state & Qt::LeftButton)
button = 0;
else if(state & Qt::RightButton)
button = 2;
else if(state & Qt::MidButton)
button = 1;
else
return; //Invalid mouse button
if(_recheckSettings[ button ])
doRecheck();
if(_resetSettings[ button ])
doReset();
if(_viewSettings[ button ])
doView();
if(_runSettings[ button ])
runCommand();
if(_popupSettings[ button ])
doPopup();
}
status_t MediaRecorder::init()
{
LOGV("init");
if(mMediaRecorder == NULL) {
LOGE("media recorder is not initialized yet");
return INVALID_OPERATION;
}
if (!(mCurrentState & MEDIA_RECORDER_IDLE)) {
LOGE("init called in an invalid state(%d)", mCurrentState);
return INVALID_OPERATION;
}
status_t ret = mMediaRecorder->init();
if (ret == DEAD_OBJECT) {
ret = doReset();
if (OK == ret) {
ret = mMediaRecorder->init();
}
}
if (OK != ret) {
LOGV("init failed: %d", ret);
mCurrentState = MEDIA_RECORDER_ERROR;
return ret;
}
ret = mMediaRecorder->setListener(this);
if (OK != ret) {
LOGV("setListener failed: %d", ret);
mCurrentState = MEDIA_RECORDER_ERROR;
return ret;
}
mCurrentState = MEDIA_RECORDER_INITIALIZED;
return ret;
}
BSWScriptedAI::BSWScriptedAI(Creature* pCreature) : ScriptedAI(pCreature)
{
doReset();
debug_log("BSW: Initialized BSWScriptedAI structure for creature %u difficulty %u",m_creature->GetEntry(),currentDifficulty);
};
void InnerSolver::reset()
{
setInitialCondition();
doReset();
}
void vfdcReset() {
doReset();
}
void FilterItemWidget::reset()
{
doReset();
}
/*
* This thread waits for ANT messages from a VFS file.
*/
void *fnRxThread(void *ant_rx_thread_info)
{
int iMutexLockResult;
int iPollRet;
ant_rx_thread_info_t *stRxThreadInfo;
struct pollfd astPollFd[NUM_POLL_FDS];
ant_channel_type eChannel;
ANT_FUNC_START();
stRxThreadInfo = (ant_rx_thread_info_t *)ant_rx_thread_info;
for (eChannel = 0; eChannel < NUM_ANT_CHANNELS; eChannel++) {
astPollFd[eChannel].fd = stRxThreadInfo->astChannels[eChannel].iFd;
astPollFd[eChannel].events = EVENTS_TO_LISTEN_FOR;
}
// Fill out poll request for the shutdown signaller.
astPollFd[EVENTFD_IDX].fd = stRxThreadInfo->iRxShutdownEventFd;
astPollFd[EVENTFD_IDX].events = POLL_IN;
// Reset the waiting for response, since we don't want a stale value if we were reset.
stRxThreadInfo->bWaitingForKeepaliveResponse = ANT_FALSE;
/* continue running as long as not terminated */
while (stRxThreadInfo->ucRunThread) {
/* Wait for data available on any file (transport path), shorter wait if we just timed out. */
int timeout = stRxThreadInfo->bWaitingForKeepaliveResponse ? KEEPALIVE_TIMEOUT : ANT_POLL_TIMEOUT;
iPollRet = poll(astPollFd, NUM_POLL_FDS, timeout);
if (!iPollRet) {
if(!stRxThreadInfo->bWaitingForKeepaliveResponse)
{
stRxThreadInfo->bWaitingForKeepaliveResponse = ANT_TRUE;
// Keep alive is done on a separate thread so that rxThread can handle flow control during
// the message.
pthread_t thread;
// Don't care if it failed as the consequence is just a missed keep-alive.
pthread_create(&thread, NULL, fnKeepAliveThread, NULL);
// Detach the thread so that we don't need to join it later.
pthread_detach(thread);
ANT_DEBUG_V("poll timed out, checking exit cond");
} else
{
ANT_DEBUG_E("No response to keepalive, attempting recovery.");
doReset(stRxThreadInfo);
goto out;
}
} else if (iPollRet < 0) {
ANT_ERROR("unhandled error: %s, attempting recovery.", strerror(errno));
doReset(stRxThreadInfo);
goto out;
} else {
for (eChannel = 0; eChannel < NUM_ANT_CHANNELS; eChannel++) {
if (areAllFlagsSet(astPollFd[eChannel].revents, EVENT_HARD_RESET)) {
ANT_ERROR("Hard reset indicated by %s. Attempting recovery.",
stRxThreadInfo->astChannels[eChannel].pcDevicePath);
doReset(stRxThreadInfo);
goto out;
} else if (areAllFlagsSet(astPollFd[eChannel].revents, EVENT_CHIP_SHUTDOWN)) {
/* chip reported it was unexpectedly disabled */
ANT_DEBUG_D(
"poll hang-up from %s. exiting rx thread", stRxThreadInfo->astChannels[eChannel].pcDevicePath);
doReset(stRxThreadInfo);
goto out;
} else if (areAllFlagsSet(astPollFd[eChannel].revents, EVENT_DATA_AVAILABLE)) {
ANT_DEBUG_D("data on %s. reading it",
stRxThreadInfo->astChannels[eChannel].pcDevicePath);
// Doesn't matter what data we received, we know the chip is alive.
stRxThreadInfo->bWaitingForKeepaliveResponse = ANT_FALSE;
if (readChannelMsg(eChannel, &stRxThreadInfo->astChannels[eChannel]) < 0) {
// set flag to exit out of Rx Loop
stRxThreadInfo->ucRunThread = 0;
}
} else if (areAllFlagsSet(astPollFd[eChannel].revents, POLLNVAL)) {
ANT_ERROR("poll was called on invalid file descriptor %s. Attempting recovery.",
stRxThreadInfo->astChannels[eChannel].pcDevicePath);
doReset(stRxThreadInfo);
goto out;
} else if (areAllFlagsSet(astPollFd[eChannel].revents, POLLERR)) {
ANT_ERROR("Unknown error from %s. Attempting recovery.",
stRxThreadInfo->astChannels[eChannel].pcDevicePath);
doReset(stRxThreadInfo);
goto out;
} else if (astPollFd[eChannel].revents) {
ANT_DEBUG_W("unhandled poll result %#x from %s",
astPollFd[eChannel].revents,
stRxThreadInfo->astChannels[eChannel].pcDevicePath);
}
}
// Now check for shutdown signal
if(areAllFlagsSet(astPollFd[EVENTFD_IDX].revents, POLLIN))
{
ANT_DEBUG_I("rx thread caught shutdown signal.");
// reset the counter by reading.
uint64_t counter;
read(stRxThreadInfo->iRxShutdownEventFd, &counter, sizeof(counter));
// don't care if read error, going to close the thread anyways.
stRxThreadInfo->ucRunThread = 0;
} else if (astPollFd[EVENTFD_IDX].revents != 0) {
ANT_ERROR("Shutdown event descriptor had unexpected event: %#x. exiting rx thread.",
astPollFd[EVENTFD_IDX].revents);
stRxThreadInfo->ucRunThread = 0;
}
}
}
/* disable ANT radio if not already disabling */
// Try to get stEnabledStatusLock.
// if you get it then no one is enabling or disabling
// if you can't get it assume something made you exit
ANT_DEBUG_V("try getting stEnabledStatusLock in %s", __FUNCTION__);
iMutexLockResult = pthread_mutex_trylock(stRxThreadInfo->pstEnabledStatusLock);
if (!iMutexLockResult) {
ANT_DEBUG_V("got stEnabledStatusLock in %s", __FUNCTION__);
ANT_WARN("rx thread has unexpectedly crashed, cleaning up");
// spoof our handle as closed so we don't try to join ourselves in disable
stRxThreadInfo->stRxThread = 0;
if (g_fnStateCallback) {
g_fnStateCallback(RADIO_STATUS_DISABLING);
}
ant_disable();
if (g_fnStateCallback) {
g_fnStateCallback(ant_radio_enabled_status());
}
ANT_DEBUG_V("releasing stEnabledStatusLock in %s", __FUNCTION__);
pthread_mutex_unlock(stRxThreadInfo->pstEnabledStatusLock);
ANT_DEBUG_V("released stEnabledStatusLock in %s", __FUNCTION__);
} else if (iMutexLockResult != EBUSY) {
ANT_ERROR("rx thread closing code, trylock on state lock failed: %s",
strerror(iMutexLockResult));
} else {
ANT_DEBUG_V("stEnabledStatusLock busy");
}
out:
ANT_FUNC_END();
#ifdef ANDROID
return NULL;
#endif
}
void
doReset()
{
doReset(w_.bits());
}
//-----------------------------------------------------------------------------
TrackerDialog::TrackerDialog()
: settings_dirty(false), tracker(NULL), trans_calib_running(false), timer(this)
{
qDebug()<<"TrackerDialog::TrackerDialog";
setAttribute(Qt::WA_DeleteOnClose, false);
ui.setupUi( this );
settings.load_ini();
dialog_settings.load_ini();
// initialize ui values
ui.videowidget_check->setChecked(settings.video_widget);
ui.dynpose_check->setChecked(settings.dyn_pose_res);
ui.sleep_spin->setValue(settings.sleep_time);
ui.reset_spin->setValue(settings.reset_time);
ui.camindex_spin->setValue(settings.cam_index);
ui.f_dspin->setValue(settings.cam_f);
ui.res_x_spin->setValue(settings.cam_res_x);
ui.res_y_spin->setValue(settings.cam_res_y);
ui.fps_spin->setValue(settings.cam_fps);
ui.campitch_spin->setValue(settings.cam_pitch);
ui.threshold_slider->setValue(settings.threshold);
ui.chkEnableRoll->setChecked(settings.bEnableRoll);
ui.chkEnablePitch->setChecked(settings.bEnablePitch);
ui.chkEnableYaw->setChecked(settings.bEnableYaw);
ui.chkEnableX->setChecked(settings.bEnableX);
ui.chkEnableY->setChecked(settings.bEnableY);
ui.chkEnableZ->setChecked(settings.bEnableZ);
ui.mindiam_spin->setValue(settings.min_point_size);
ui.maxdiam_spin->setValue(settings.max_point_size);
ui.model_tabs->setCurrentIndex(dialog_settings.active_model_panel);
ui.clip_bheight_spin->setValue(dialog_settings.clip_by);
ui.clip_blength_spin->setValue(dialog_settings.clip_bz);
ui.clip_theight_spin->setValue(dialog_settings.clip_ty);
ui.clip_tlength_spin->setValue(dialog_settings.clip_tz);
ui.cap_width_spin->setValue(dialog_settings.cap_x);
ui.cap_height_spin->setValue(dialog_settings.cap_y);
ui.cap_length_spin->setValue(dialog_settings.cap_z);
ui.m1x_spin->setValue(dialog_settings.M01x);
ui.m1y_spin->setValue(dialog_settings.M01y);
ui.m1z_spin->setValue(dialog_settings.M01z);
ui.m2x_spin->setValue(dialog_settings.M02x);
ui.m2y_spin->setValue(dialog_settings.M02y);
ui.m2z_spin->setValue(dialog_settings.M02z);
ui.tx_spin->setValue(settings.t_MH[0]);
ui.ty_spin->setValue(settings.t_MH[1]);
ui.tz_spin->setValue(settings.t_MH[2]);
// connect Qt signals and slots
connect( ui.videowidget_check,SIGNAL(toggled(bool)), this,SLOT(set_video_widget(bool)) );
connect( ui.dynpose_check,SIGNAL(toggled(bool)), this,SLOT(set_dyn_pose_res(bool)) );
connect( ui.sleep_spin,SIGNAL(valueChanged(int)), this,SLOT(set_sleep_time(int)) );
connect( ui.reset_spin,SIGNAL(valueChanged(int)), this,SLOT(set_reset_time(int)) );
connect( ui.camindex_spin,SIGNAL(valueChanged(int)), this,SLOT(set_cam_index(int)) );
connect( ui.f_dspin,SIGNAL(valueChanged(double)), this,SLOT(set_cam_f(double)) );
connect( ui.res_x_spin,SIGNAL(valueChanged(int)), this,SLOT(set_cam_res_x(int)) );
connect( ui.res_y_spin,SIGNAL(valueChanged(int)), this,SLOT(set_cam_res_y(int)) );
connect( ui.fps_spin,SIGNAL(valueChanged(int)), this,SLOT(set_cam_fps(int)) );
connect( ui.campitch_spin,SIGNAL(valueChanged(int)), this,SLOT(set_cam_pitch(int)) );
connect( ui.threshold_slider,SIGNAL(sliderMoved(int)), this,SLOT(set_threshold(int)) );
connect( ui.chkEnableRoll,SIGNAL(toggled(bool)), this,SLOT(set_ena_roll(bool)) );
connect( ui.chkEnablePitch,SIGNAL(toggled(bool)), this,SLOT(set_ena_pitch(bool)) );
connect( ui.chkEnableYaw,SIGNAL(toggled(bool)), this,SLOT(set_ena_yaw(bool)) );
connect( ui.chkEnableX,SIGNAL(toggled(bool)), this,SLOT(set_ena_x(bool)) );
connect( ui.chkEnableY,SIGNAL(toggled(bool)), this,SLOT(set_ena_y(bool)) );
connect( ui.chkEnableZ,SIGNAL(toggled(bool)), this,SLOT(set_ena_z(bool)) );
connect( ui.mindiam_spin,SIGNAL(valueChanged(int)), this,SLOT(set_min_point_size(int)) );
connect( ui.maxdiam_spin,SIGNAL(valueChanged(int)), this,SLOT(set_max_point_size(int)) );
connect( ui.model_tabs,SIGNAL(currentChanged(int)), this,SLOT(set_model(int)) );
connect( ui.clip_theight_spin,SIGNAL(valueChanged(int)), this,SLOT(set_clip_t_height(int)) );
connect( ui.clip_tlength_spin,SIGNAL(valueChanged(int)), this,SLOT(set_clip_t_length(int)) );
connect( ui.clip_bheight_spin,SIGNAL(valueChanged(int)), this,SLOT(set_clip_b_height(int)) );
connect( ui.clip_blength_spin,SIGNAL(valueChanged(int)), this,SLOT(set_clip_b_length(int)) );
connect( ui.cap_width_spin,SIGNAL(valueChanged(int)), this,SLOT(set_cap_width(int)) );
connect( ui.cap_height_spin,SIGNAL(valueChanged(int)), this,SLOT(set_cap_height(int)) );
connect( ui.cap_length_spin,SIGNAL(valueChanged(int)), this,SLOT(set_cap_length(int)) );
connect( ui.m1x_spin,SIGNAL(valueChanged(int)), this,SLOT(set_m1x(int)) );
connect( ui.m1y_spin,SIGNAL(valueChanged(int)), this,SLOT(set_m1y(int)) );
connect( ui.m1z_spin,SIGNAL(valueChanged(int)), this,SLOT(set_m1z(int)) );
connect( ui.m2x_spin,SIGNAL(valueChanged(int)), this,SLOT(set_m2x(int)) );
connect( ui.m2y_spin,SIGNAL(valueChanged(int)), this,SLOT(set_m2y(int)) );
connect( ui.m2z_spin,SIGNAL(valueChanged(int)), this,SLOT(set_m2z(int)) );
connect( ui.tx_spin,SIGNAL(valueChanged(int)), this,SLOT(set_tx(int)) );
connect( ui.ty_spin,SIGNAL(valueChanged(int)), this,SLOT(set_ty(int)) );
connect( ui.tz_spin,SIGNAL(valueChanged(int)), this,SLOT(set_tz(int)) );
connect( ui.tcalib_button,SIGNAL(toggled(bool)), this,SLOT(startstop_trans_calib(bool)) );
connect(ui.reset_button, SIGNAL(clicked()), this, SLOT(doReset()));
//connect(ui.center_button, SIGNAL(clicked()), this, SLOT(doCenter()));
connect(ui.ok_button, SIGNAL(clicked()), this, SLOT(doOK()));
connect(ui.cancel_button, SIGNAL(clicked()), this, SLOT(doCancel()));
connect(&timer,SIGNAL(timeout()), this,SLOT(poll_tracker_info()));
timer.start(100);
}
int main (int argc, char *argv [])
{
int i ;
int model, rev, mem, maker, overVolted ;
if (getenv ("WIRINGPI_DEBUG") != NULL)
{
printf ("gpio: wiringPi debug mode enabled\n") ;
wiringPiDebug = TRUE ;
}
if (argc == 1)
{
fprintf (stderr, "%s\n", usage) ;
return 1 ;
}
// Help
if (strcasecmp (argv [1], "-h") == 0)
{
printf ("%s: %s\n", argv [0], usage) ;
return 0 ;
}
// Sort of a special:
if (strcmp (argv [1], "-R") == 0)
{
printf ("%d\n", piBoardRev ()) ;
return 0 ;
}
// Version & Warranty
if (strcmp (argv [1], "-V") == 0)
{
printf ("%d\n", piBoardRev ()) ;
return 0 ;
}
if (strcmp (argv [1], "-v") == 0)
{
printf ("gpio version: %s\n", VERSION) ;
printf ("Copyright (c) 2012-2014 Gordon Henderson\n") ;
printf ("This is free software with ABSOLUTELY NO WARRANTY.\n") ;
printf ("For details type: %s -warranty\n", argv [0]) ;
printf ("\n") ;
piBoardId (&model, &rev, &mem, &maker, &overVolted) ;
if (model == PI_MODEL_UNKNOWN)
{
printf ("Your Raspberry Pi has an unknown model type. Please report this to\n") ;
printf (" [email protected]\n") ;
printf ("with a copy of your /proc/cpuinfo if possible\n") ;
}
else
{
printf ("Banana Pro Details:\n") ;
printf (" Type: %s, Revision: %s, Memory: %dMB, Maker: %s %s\n",
piModelNames [model], piRevisionNames [rev], mem, piMakerNames [maker], overVolted ? "[OV]" : "") ;
}
return 0 ;
}
if (strcasecmp (argv [1], "-warranty") == 0)
{
printf ("gpio version: %s\n", VERSION) ;
printf ("Copyright (c) 2012-2014 Gordon Henderson\n") ;
printf ("\n") ;
printf (" This program is free software; you can redistribute it and/or modify\n") ;
printf (" it under the terms of the GNU Leser General Public License as published\n") ;
printf (" by the Free Software Foundation, either version 3 of the License, or\n") ;
printf (" (at your option) any later version.\n") ;
printf ("\n") ;
printf (" This program is distributed in the hope that it will be useful,\n") ;
printf (" but WITHOUT ANY WARRANTY; without even the implied warranty of\n") ;
printf (" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n") ;
printf (" GNU Lesser General Public License for more details.\n") ;
printf ("\n") ;
printf (" You should have received a copy of the GNU Lesser General Public License\n") ;
printf (" along with this program. If not, see <http://www.gnu.org/licenses/>.\n") ;
printf ("\n") ;
return 0 ;
}
if (geteuid () != 0)
{
fprintf (stderr, "%s: Must be root to run. Program should be suid root. This is an error.\n", argv [0]) ;
return 1 ;
}
// Initial test for /sys/class/gpio operations:
/**/ if (strcasecmp (argv [1], "exports" ) == 0)
{
doExports (argc, argv) ;
return 0 ;
}
else if (strcasecmp (argv [1], "export" ) == 0)
{
doExport (argc, argv) ;
return 0 ;
}
else if (strcasecmp (argv [1], "edge" ) == 0)
{
doEdge (argc, argv) ;
return 0 ;
}
else if (strcasecmp (argv [1], "unexport" ) == 0)
{
doUnexport (argc, argv) ;
return 0 ;
}
else if (strcasecmp (argv [1], "unexportall") == 0)
{
doUnexportall (argv [0]) ;
return 0 ;
}
// Check for load command:
if (strcasecmp (argv [1], "load" ) == 0)
{
doLoad (argc, argv) ;
return 0 ;
}
// Check for -g argument
if (strcasecmp (argv [1], "-g") == 0)
{
wiringPiSetupGpio () ;
for (i = 2 ; i < argc ; ++i)
argv [i - 1] = argv [i] ;
--argc ;
wpMode = WPI_MODE_GPIO ;
}
// Check for -1 argument
else if (strcasecmp (argv [1], "-1") == 0)
{
wiringPiSetupPhys () ;
for (i = 2 ; i < argc ; ++i)
argv [i - 1] = argv [i] ;
--argc ;
wpMode = WPI_MODE_PHYS ;
}
// Default to wiringPi mode
else
{
wiringPiSetup () ;
wpMode = WPI_MODE_PINS ;
}
// Check for -x argument to load in a new extension
if (strcasecmp (argv [1], "-x") == 0)
{
if (argc < 3)
{
fprintf (stderr, "%s: -x missing extension specification.\n", argv [0]) ;
exit (EXIT_FAILURE) ;
}
if (!doExtension (argv [0], argv [2])) // Prints its own error messages
exit (EXIT_FAILURE) ;
for (i = 3 ; i < argc ; ++i)
argv [i - 2] = argv [i] ;
argc -= 2 ;
}
if (argc <= 1)
{
fprintf (stderr, "%s: no command given\n", argv [0]) ;
exit (EXIT_FAILURE) ;
}
// Core wiringPi functions
/**/ if (strcasecmp (argv [1], "mode" ) == 0) doMode (argc, argv) ;
else if (strcasecmp (argv [1], "read" ) == 0) doRead (argc, argv) ;
else if (strcasecmp (argv [1], "write" ) == 0) doWrite (argc, argv) ;
else if (strcasecmp (argv [1], "pwm" ) == 0) doPwm (argc, argv) ;
else if (strcasecmp (argv [1], "awrite" ) == 0) doAwrite (argc, argv) ;
else if (strcasecmp (argv [1], "aread" ) == 0) doAread (argc, argv) ;
// GPIO Nicies
else if (strcasecmp (argv [1], "toggle" ) == 0) doToggle (argc, argv) ;
// Pi Specifics
else if (strcasecmp (argv [1], "pwm-bal" ) == 0) doPwmMode (PWM_MODE_BAL) ;
else if (strcasecmp (argv [1], "pwm-ms" ) == 0) doPwmMode (PWM_MODE_MS) ;
else if (strcasecmp (argv [1], "pwmr" ) == 0) doPwmRange (argc, argv) ;
else if (strcasecmp (argv [1], "pwmc" ) == 0) doPwmClock (argc, argv) ;
else if (strcasecmp (argv [1], "pwmTone" ) == 0) doPwmTone (argc, argv) ;
else if (strcasecmp (argv [1], "usbp" ) == 0) doUsbP (argc, argv) ;
else if (strcasecmp (argv [1], "readall" ) == 0) doReadall () ;
else if (strcasecmp (argv [1], "nreadall" ) == 0) doReadall () ;
else if (strcasecmp (argv [1], "pins" ) == 0) doPins () ;
else if (strcasecmp (argv [1], "i2cdetect") == 0) doI2Cdetect (argc, argv) ;
else if (strcasecmp (argv [1], "i2cd" ) == 0) doI2Cdetect (argc, argv) ;
else if (strcasecmp (argv [1], "reset" ) == 0) doReset (argv [0]) ;
else if (strcasecmp (argv [1], "wb" ) == 0) doWriteByte (argc, argv) ;
else
{
fprintf (stderr, "%s: Unknown command: %s.\n", argv [0], argv [1]) ;
exit (EXIT_FAILURE) ;
}
return 0 ;
}
int main (int argc, char *argv [])
{
int i ;
if (getenv ("WIRINGPI_DEBUG") != NULL)
{
printf ("gpio: wiringPi debug mode enabled\n") ;
wiringPiDebug = TRUE ;
}
if (argc == 1)
{
fprintf (stderr, "%s\n", usage) ;
return 1 ;
}
// Help
if (strcasecmp (argv [1], "-h") == 0)
{
printf ("%s: %s\n", argv [0], usage) ;
return 0 ;
}
// Sort of a special:
if (strcmp (argv [1], "-R") == 0)
{
printf ("%d\n", piBoardRev ()) ;
return 0 ;
}
// Version & Warranty
if (strcmp (argv [1], "-V") == 0)
{
printf ("%d\n", piBoardRev ()) ;
return 0 ;
}
if (strcmp (argv [1], "-v") == 0)
{
printf ("gpio version: %s\n", VERSION) ;
printf ("Copyright (c) 2012-2013 Gordon Henderson\n") ;
printf ("This is free software with ABSOLUTELY NO WARRANTY.\n") ;
printf ("For details type: %s -warranty\n", argv [0]) ;
printf ("\n") ;
printf ("This Raspberry Pi is a revision %d board.\n", piBoardRev ()) ;
return 0 ;
}
if (strcasecmp (argv [1], "-warranty") == 0)
{
printf ("gpio version: %s\n", VERSION) ;
printf ("Copyright (c) 2012-2013 Gordon Henderson\n") ;
printf ("\n") ;
printf (" This program is free software; you can redistribute it and/or modify\n") ;
printf (" it under the terms of the GNU Leser General Public License as published\n") ;
printf (" by the Free Software Foundation, either version 3 of the License, or\n") ;
printf (" (at your option) any later version.\n") ;
printf ("\n") ;
printf (" This program is distributed in the hope that it will be useful,\n") ;
printf (" but WITHOUT ANY WARRANTY; without even the implied warranty of\n") ;
printf (" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n") ;
printf (" GNU Lesser General Public License for more details.\n") ;
printf ("\n") ;
printf (" You should have received a copy of the GNU Lesser General Public License\n") ;
printf (" along with this program. If not, see <http://www.gnu.org/licenses/>.\n") ;
printf ("\n") ;
return 0 ;
}
if (geteuid () != 0)
{
fprintf (stderr, "%s: Must be root to run. Program should be suid root. This is an error.\n", argv [0]) ;
return 1 ;
}
// Initial test for /sys/class/gpio operations:
/**/ if (strcasecmp (argv [1], "exports" ) == 0) { doExports (argc, argv) ; return 0 ; }
else if (strcasecmp (argv [1], "export" ) == 0) { doExport (argc, argv) ; return 0 ; }
else if (strcasecmp (argv [1], "edge" ) == 0) { doEdge (argc, argv) ; return 0 ; }
else if (strcasecmp (argv [1], "unexport" ) == 0) { doUnexport (argc, argv) ; return 0 ; }
else if (strcasecmp (argv [1], "unexportall") == 0) { doUnexportall (argv [0]) ; return 0 ; }
// Check for load command:
if (strcasecmp (argv [1], "load" ) == 0) { doLoad (argc, argv) ; return 0 ; }
// Gertboard commands
if (strcasecmp (argv [1], "gbr" ) == 0) { doGbr (argc, argv) ; return 0 ; }
if (strcasecmp (argv [1], "gbw" ) == 0) { doGbw (argc, argv) ; return 0 ; }
// Check for -g argument
/**/ if (strcasecmp (argv [1], "-g") == 0)
{
wiringPiSetupGpio () ;
for (i = 2 ; i < argc ; ++i)
argv [i - 1] = argv [i] ;
--argc ;
wpMode = WPI_MODE_GPIO ;
}
// Check for -1 argument
else if (strcasecmp (argv [1], "-1") == 0)
{
wiringPiSetupPhys () ;
for (i = 2 ; i < argc ; ++i)
argv [i - 1] = argv [i] ;
--argc ;
wpMode = WPI_MODE_PHYS ;
}
// Check for -p argument for PiFace
else if (strcasecmp (argv [1], "-p") == 0)
{
piFaceSetup (200) ;
for (i = 2 ; i < argc ; ++i)
argv [i - 1] = argv [i] ;
--argc ;
wpMode = WPI_MODE_PIFACE ;
}
// Default to wiringPi mode
else
{
wiringPiSetup () ;
wpMode = WPI_MODE_PINS ;
}
// Check for -x argument to load in a new extension
if (strcasecmp (argv [1], "-x") == 0)
{
if (argc < 3)
{
fprintf (stderr, "%s: -x missing extension specification.\n", argv [0]) ;
exit (EXIT_FAILURE) ;
}
if (!doExtension (argv [0], argv [2])) // Prints its own error messages
exit (EXIT_FAILURE) ;
for (i = 3 ; i < argc ; ++i)
argv [i - 2] = argv [i] ;
argc -= 2 ;
}
if (argc <= 1)
{
fprintf (stderr, "%s: no command given\n", argv [0]) ;
exit (EXIT_FAILURE) ;
}
// Core wiringPi functions
/**/ if (strcasecmp (argv [1], "mode" ) == 0) doMode (argc, argv) ;
else if (strcasecmp (argv [1], "read" ) == 0) doRead (argc, argv) ;
else if (strcasecmp (argv [1], "write" ) == 0) doWrite (argc, argv) ;
else if (strcasecmp (argv [1], "pwm" ) == 0) doPwm (argc, argv) ;
else if (strcasecmp (argv [1], "awrite" ) == 0) doAwrite (argc, argv) ;
else if (strcasecmp (argv [1], "aread" ) == 0) doAread (argc, argv) ;
// GPIO Nicies
else if (strcasecmp (argv [1], "toggle" ) == 0) doToggle (argc, argv) ;
// Pi Specifics
else if (strcasecmp (argv [1], "pwm-bal" ) == 0) doPwmMode (PWM_MODE_BAL) ;
else if (strcasecmp (argv [1], "pwm-ms" ) == 0) doPwmMode (PWM_MODE_MS) ;
else if (strcasecmp (argv [1], "pwmr" ) == 0) doPwmRange (argc, argv) ;
else if (strcasecmp (argv [1], "pwmc" ) == 0) doPwmClock (argc, argv) ;
else if (strcasecmp (argv [1], "drive" ) == 0) doPadDrive (argc, argv) ;
else if (strcasecmp (argv [1], "readall" ) == 0) doReadall () ;
else if (strcasecmp (argv [1], "i2cdetect") == 0) doI2Cdetect (argc, argv) ;
else if (strcasecmp (argv [1], "i2cd" ) == 0) doI2Cdetect (argc, argv) ;
else if (strcasecmp (argv [1], "reset" ) == 0) doReset (argv [0]) ;
else if (strcasecmp (argv [1], "wb" ) == 0) doWriteByte (argc, argv) ;
else if (strcasecmp (argv [1], "clock" ) == 0) doClock (argc, argv) ;
else if (strcasecmp (argv [1], "wfi" ) == 0) doWfi (argc, argv) ;
else
{
fprintf (stderr, "%s: Unknown command: %s.\n", argv [0], argv [1]) ;
exit (EXIT_FAILURE) ;
}
return 0 ;
}
void BoxContainerItem::reset()
{
doReset();
}