static rtems_device_driver graes_ioctl(rtems_device_major_number major, rtems_device_minor_number minor, void *arg)
{
struct graes_priv *pDev;
struct drvmgr_dev *dev;
rtems_libio_ioctl_args_t *ioarg = (rtems_libio_ioctl_args_t *)arg;
unsigned int *data = ioarg->buffer;
int status;
struct graes_ioc_config *cfg;
struct graes_ioc_hw_status *hwregs;
IRQ_GLOBAL_PREPARE(oldLevel);
struct graes_list *chain;
struct graes_block *curr;
struct graes_ioc_hw *hwimpl;
struct graes_ioc_stats *stats;
struct graes_print_status *ps;
int num,ret;
FUNCDBG();
if ( drvmgr_get_dev(&graes_drv_info.general, minor, &dev) ) {
return RTEMS_INVALID_NUMBER;
}
pDev = (struct graes_priv *)dev->priv;
if (!ioarg)
return RTEMS_INVALID_NAME;
ioarg->ioctl_return = 0;
switch(ioarg->command) {
case GRAES_IOC_START:
if ( pDev->running ) {
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
}
if ( (status=graes_start(pDev)) != RTEMS_SUCCESSFUL ){
return status;
}
/* Register interrupt handler and unmask IRQ at IRQ ctrl */
drvmgr_interrupt_register(dev, 0, "graes", graes_interrupt, pDev);
/* Read and write are now open... */
break;
case GRAES_IOC_STOP:
if ( !pDev->running ) {
return RTEMS_RESOURCE_IN_USE;
}
/* Disable interrupts */
drvmgr_interrupt_unregister(dev, 0, graes_interrupt, pDev);
graes_stop(pDev);
pDev->running = 0;
break;
case GRAES_IOC_ISSTARTED:
if ( !pDev->running ) {
return RTEMS_RESOURCE_IN_USE;
}
break;
case GRAES_IOC_SET_BLOCKING_MODE:
if ( (unsigned int)data > GRAES_BLKMODE_BLK ) {
return RTEMS_INVALID_NAME;
}
DBG("GRAES: Set blocking mode: %d\n",(unsigned int)data);
pDev->config.blocking = (unsigned int)data;
break;
case GRAES_IOC_SET_TIMEOUT:
DBG("GRAES: Timeout: %d\n",(unsigned int)data);
pDev->config.timeout = (rtems_interval)data;
break;
case GRAES_IOC_SET_CONFIG:
cfg = (struct graes_ioc_config *)data;
if ( !cfg ) {
return RTEMS_INVALID_NAME;
}
if ( pDev->running ) {
return RTEMS_RESOURCE_IN_USE;
}
pDev->config = *cfg;
break;
case GRAES_IOC_GET_STATS:
stats = (struct graes_ioc_stats *)data;
if ( !stats ) {
return RTEMS_INVALID_NAME;
}
memcpy(stats,&pDev->stats,sizeof(struct graes_ioc_stats));
break;
case GRAES_IOC_CLR_STATS:
memset(&pDev->stats,0,sizeof(struct graes_ioc_stats));
break;
case GRAES_IOC_GET_CONFIG:
cfg = (struct graes_ioc_config *)data;
if ( !cfg ) {
return RTEMS_INVALID_NAME;
}
*cfg = pDev->config;
break;
case GRAES_IOC_GET_HW_IMPL:
hwimpl = (struct graes_ioc_hw *)data;
if ( !hwimpl ) {
return RTEMS_INVALID_NAME;
}
*hwimpl = pDev->hw_avail;
break;
case GRAES_IOC_GET_HW_STATUS:
hwregs = (struct graes_ioc_hw_status *)data;
if ( !hwregs ) {
return RTEMS_INVALID_NAME;
}
/* We disable interrupt in order to get a snapshot of the registers */
IRQ_GLOBAL_DISABLE(oldLevel);
IRQ_GLOBAL_ENABLE(oldLevel);
break;
case GRAES_IOC_PRINT_STATUS:
ps = (struct graes_print_status *)data;
graes_printstatus(pDev, ps);
break;
/* Put a chain of frames at the back of the "Ready frames" queue. This
* triggers the driver to put frames from the Ready queue into unused
* available descriptors. (Ready -> Scheduled)
*/
case GRAES_IOC_ENCRYPT:
if ( !pDev->running ){
return RTEMS_RESOURCE_IN_USE;
}
num=0;
/* Get pointer to frame chain wished be sent */
chain = (struct graes_list *)ioarg->buffer;
if ( !chain ){
/* No new frames to send ==> just trigger hardware
* to send previously made ready frames to be sent.
*/
pDev->handling_transmission = 1;
goto trigger_transmission;
}
if ( !chain->tail || !chain->head ){
return RTEMS_INVALID_NAME;
}
/* Mark ready frames unsent by clearing GRAES_FLAGS_PROCESSED of all frames */
curr = chain->head;
while(curr != chain->tail){
curr->flags = curr->flags & ~(GRAES_FLAGS_PROCESSED|GRRM_FLAGS_ERR);
curr = curr->next;
num++;
}
curr->flags = curr->flags & ~(GRAES_FLAGS_PROCESSED|GRRM_FLAGS_ERR);
num++;
DBG("GRAES_ENCRYPT: head: 0x%x, tail: 0x%x num: %d\n",chain->head,chain->tail, num);
pDev->handling_transmission = 1;
/* 1. Put frames into ready queue
* (New Frames->READY)
*/
if ( pDev->ready.head ){
/* Frames already on ready queue (no free descriptors previously) ==>
* Put frames at end of ready queue
*/
pDev->ready.tail->next = chain->head;
pDev->ready.tail = chain->tail;
chain->tail->next = NULL;
}else{
/* All frames is put into the ready queue for later processing */
pDev->ready.head = chain->head;
pDev->ready.tail = chain->tail;
chain->tail->next = NULL;
}
pDev->ready_cnt += num; /* Added 'num' frames to ready queue */
trigger_transmission:
/* 2. Free used descriptors and put the sent frame into the "Sent queue"
* (SCHEDULED->SENT)
*/
num = graes_free_encrypted(pDev);
pDev->scheduled_cnt -= num;
pDev->sent_cnt += num;
/* 3. Use all available free descriptors there are frames for
* in the ready queue.
* (READY->SCHEDULED)
*/
num = graes_schedule_ready(pDev,0);
pDev->ready_cnt -= num;
pDev->scheduled_cnt += num;
pDev->handling_transmission = 0;
break;
/* Take all available sent frames from the "Sent frames" queue.
* If no frames has been sent, the thread may get blocked if in blocking
* mode. The blocking mode is not available if driver is not in running mode.
*
* Note this ioctl may return success even if the driver is not in STARTED mode.
* This is because in case of a error (link error of similar) and the driver switch
* from START to STOP mode we must still be able to get our frames back.
*
* Note in case the driver fails to send a frame for some reason (link error),
* the sent flag is set to 0 indicating a failure.
*
*/
case GRAES_IOC_RECLAIM:
/* Get pointer to were to place reaped chain */
chain = (struct graes_list *)ioarg->buffer;
if ( !chain ){
return RTEMS_INVALID_NAME;
}
/* Lock out interrupt handler */
pDev->handling_transmission = 1;
do {
/* Move sent frames from descriptors to Sent queue. This makes more
* descriptors (BDs) available.
*/
num = graes_free_encrypted(pDev);
pDev->scheduled_cnt -= num;
pDev->sent_cnt += num;
if ( pDev->running ){
/* Fill descriptors with as many frames from the ready list
* as possible.
*/
num = graes_schedule_ready(pDev,0);
pDev->ready_cnt -= num;
pDev->scheduled_cnt += num;
}
/* Are there any frames on the sent queue waiting to be
* reclaimed?
*/
if ( !pDev->sent.head ){
/* No frames to reclaim - no frame in sent queue.
* Instead we block thread until frames have been sent
* if in blocking mode.
*/
if ( pDev->running && pDev->config.blocking ){
ret = rtems_semaphore_obtain(pDev->sem_rx,RTEMS_WAIT,pDev->config.timeout);
if ( ret == RTEMS_TIMEOUT ) {
pDev->handling_transmission = 0;
return RTEMS_TIMEOUT;
} else if ( ret == RTEMS_SUCCESSFUL ) {
/* There might be frames available, go check */
continue;
} else {
/* any error (driver closed, internal error etc.) */
pDev->handling_transmission = 0;
return RTEMS_UNSATISFIED;
}
}else{
/* non-blocking mode, we quit */
chain->head = NULL;
chain->tail = NULL;
/* do not lock out interrupt handler any more */
pDev->handling_transmission = 0;
return RTEMS_TIMEOUT;
}
}else{
/* Take all sent framess from sent queue to userspace queue */
chain->head = pDev->sent.head;
chain->tail = pDev->sent.tail;
chain->tail->next = NULL; /* Just for sure */
/* Mark no Sent */
graes_list_clr(&pDev->sent);
DBG("TX_RECLAIM: head: 0x%x, tail: 0x%x\n",chain->head,chain->tail);
break;
}
}while(1);
/* do not lock out interrupt handler any more */
pDev->handling_transmission = 0;
break;
default:
return RTEMS_NOT_DEFINED;
}
return RTEMS_SUCCESSFUL;
}
static rtems_device_driver grtm_ioctl(rtems_device_major_number major, rtems_device_minor_number minor, void *arg)
{
struct grtm_priv *pDev;
struct drvmgr_dev *dev;
rtems_libio_ioctl_args_t *ioarg = (rtems_libio_ioctl_args_t *)arg;
unsigned int *data;
int status;
struct grtm_ioc_config *cfg;
struct grtm_ioc_hw_status *hwregs;
struct grtm_list *chain;
struct grtm_frame *curr;
struct grtm_ioc_hw *hwimpl;
struct grtm_ioc_stats *stats;
int num,ret;
FUNCDBG();
if ( drvmgr_get_dev(&grtm_drv_info.general, minor, &dev) ) {
return RTEMS_INVALID_NUMBER;
}
pDev = (struct grtm_priv *)dev->priv;
if (!ioarg)
return RTEMS_INVALID_NAME;
data = ioarg->buffer;
ioarg->ioctl_return = 0;
switch(ioarg->command) {
case GRTM_IOC_START:
if ( pDev->running ) {
return RTEMS_RESOURCE_IN_USE; /* EBUSY */
}
if ( (status=grtm_start(pDev)) != RTEMS_SUCCESSFUL ){
return status;
}
/* Register ISR & Enable interrupt */
drvmgr_interrupt_register(dev, 0, "grtm", grtm_interrupt, pDev);
/* Read and write are now open... */
break;
case GRTM_IOC_STOP:
if ( !pDev->running ) {
return RTEMS_RESOURCE_IN_USE;
}
/* Disable interrupts */
drvmgr_interrupt_unregister(dev, 0, grtm_interrupt, pDev);
grtm_stop(pDev);
pDev->running = 0;
break;
case GRTM_IOC_ISSTARTED:
if ( !pDev->running ) {
return RTEMS_RESOURCE_IN_USE;
}
break;
case GRTM_IOC_SET_BLOCKING_MODE:
if ( (unsigned int)data > GRTM_BLKMODE_BLK ) {
return RTEMS_INVALID_NAME;
}
DBG("GRTM: Set blocking mode: %d\n",(unsigned int)data);
pDev->config.blocking = (unsigned int)data;
break;
case GRTM_IOC_SET_TIMEOUT:
DBG("GRTM: Timeout: %d\n",(unsigned int)data);
pDev->config.timeout = (rtems_interval)data;
break;
case GRTM_IOC_SET_CONFIG:
cfg = (struct grtm_ioc_config *)data;
if ( !cfg ) {
return RTEMS_INVALID_NAME;
}
if ( pDev->running ) {
return RTEMS_RESOURCE_IN_USE;
}
pDev->config = *cfg;
break;
case GRTM_IOC_GET_STATS:
stats = (struct grtm_ioc_stats *)data;
if ( !stats ) {
return RTEMS_INVALID_NAME;
}
memcpy(stats,&pDev->stats,sizeof(struct grtm_ioc_stats));
break;
case GRTM_IOC_CLR_STATS:
memset(&pDev->stats,0,sizeof(struct grtm_ioc_stats));
break;
case GRTM_IOC_GET_CONFIG:
cfg = (struct grtm_ioc_config *)data;
if ( !cfg ) {
return RTEMS_INVALID_NAME;
}
*cfg = pDev->config;
break;
case GRTM_IOC_GET_OCFREG:
if ( !pDev->hw_avail.ocf ) {
/* Hardware does not implement the OCF register */
return RTEMS_NOT_DEFINED;
}
if ( !data ) {
return RTEMS_INVALID_NAME;
}
*(unsigned int **)data = (unsigned int *)&pDev->regs->ocf;
break;
case GRTM_IOC_GET_HW_IMPL:
hwimpl = (struct grtm_ioc_hw *)data;
if ( !hwimpl ) {
return RTEMS_INVALID_NAME;
}
*hwimpl = pDev->hw_avail;
break;
case GRTM_IOC_GET_HW_STATUS:
hwregs = (struct grtm_ioc_hw_status *)data;
if ( !hwregs ) {
return RTEMS_INVALID_NAME;
}
/* We disable interrupt in order to get a snapshot of the registers */
/* TODO: implement hwregs */
break;
/* Put a chain of frames at the back of the "Ready frames" queue. This
* triggers the driver to put frames from the Ready queue into unused
* available descriptors. (Ready -> Scheduled)
*/
case GRTM_IOC_SEND:
if ( !pDev->running ){
return RTEMS_RESOURCE_IN_USE;
}
/* Get pointer to frame chain wished be sent */
chain = (struct grtm_list *)ioarg->buffer;
if ( !chain ){
/* No new frames to send ==> just trigger hardware
* to send previously made ready frames to be sent.
* If someone else is processing the DMA we igore the
* request.
*/
if (grtm_request_txlock(pDev, 0)) {
grtm_tx_process(pDev);
grtm_release_txlock(pDev);
}
break;
}
if ( !chain->tail || !chain->head ){
return RTEMS_INVALID_NAME;
}
DBG("GRTM_SEND: head: 0x%x, tail: 0x%x\n",chain->head,chain->tail);
/* Mark ready frames unsent by clearing GRTM_FLAGS_SENT of all frames */
num = 0;
curr = chain->head;
while(curr != chain->tail){
curr->flags = curr->flags & ~(GRTM_FLAGS_SENT|GRRM_FLAGS_ERR);
curr = curr->next;
num++;
}
curr->flags = curr->flags & ~(GRTM_FLAGS_SENT|GRRM_FLAGS_ERR);
num++;
/* wait until we get the device lock */
grtm_request_txlock(pDev, 1);
/* 1. Put frames into ready queue
* (New Frames->READY)
*/
if ( pDev->ready.head ){
/* Frames already on ready queue (no free descriptors previously) ==>
* Put frames at end of ready queue
*/
pDev->ready.tail->next = chain->head;
pDev->ready.tail = chain->tail;
chain->tail->next = NULL;
}else{
/* All frames is put into the ready queue for later processing */
pDev->ready.head = chain->head;
pDev->ready.tail = chain->tail;
chain->tail->next = NULL;
}
pDev->ready_cnt += num; /* Added 'num' frames to ready queue */
/* 2. SCHEDULED->SENT
* 3. READY->SCHEDULED
*/
grtm_tx_process(pDev);
grtm_release_txlock(pDev);
break;
/* Take all available sent frames from the "Sent frames" queue.
* If no frames has been sent, the thread may get blocked if in blocking
* mode. The blocking mode is not available if driver is not in running mode.
*
* Note this ioctl may return success even if the driver is not in STARTED mode.
* This is because in case of a error (link error of similar) and the driver switch
* from START to STOP mode we must still be able to get our frames back.
*
* Note in case the driver fails to send a frame for some reason (link error),
* the sent flag is set to 0 indicating a failure.
*
*/
case GRTM_IOC_RECLAIM:
/* Get pointer to were to place reaped chain */
chain = (struct grtm_list *)ioarg->buffer;
if ( !chain ){
return RTEMS_INVALID_NAME;
}
/* Lock out interrupt handler */
grtm_request_txlock(pDev, 1);
do {
/* Process descriptor table and populate with new
* buffers:
* * SCHEDULED->SENT
* * READY->SCHEDULED
*/
grtm_tx_process(pDev);
/* Are there any frames on the sent queue waiting to be
* reclaimed?
*/
if ( !pDev->sent.head ){
/* No frames to reclaim - no frame in sent queue.
* Instead we block thread until frames have been sent
* if in blocking mode.
*/
if ( pDev->running && pDev->config.blocking ){
ret = rtems_semaphore_obtain(pDev->sem_tx,RTEMS_WAIT,pDev->config.timeout);
if ( ret == RTEMS_TIMEOUT ) {
grtm_release_txlock(pDev);
return RTEMS_TIMEOUT;
} else if ( ret == RTEMS_SUCCESSFUL ) {
/* There might be frames available, go check */
continue;
} else {
/* any error (driver closed, internal error etc.) */
grtm_release_txlock(pDev);
return RTEMS_UNSATISFIED;
}
}else{
/* non-blocking mode, we quit */
chain->head = NULL;
chain->tail = NULL;
/* do not lock out interrupt handler any more */
grtm_release_txlock(pDev);
return RTEMS_TIMEOUT;
}
}else{
/* Take all sent framess from sent queue to userspace queue */
chain->head = pDev->sent.head;
chain->tail = pDev->sent.tail;
chain->tail->next = NULL; /* Just for sure */
/* Mark no Sent */
grtm_list_clr(&pDev->sent);
pDev->sent_cnt = 0;
DBG("TX_RECLAIM: head: 0x%x, tail: 0x%x\n",chain->head,chain->tail);
break;
}
}while(1);
/* do not lock out interrupt handler any more */
grtm_release_txlock(pDev);
break;
default:
return RTEMS_NOT_DEFINED;
}
return RTEMS_SUCCESSFUL;
}
