static int __devinit tile_edac_mc_probe(struct platform_device *pdev)
{
char hv_file[32];
int hv_devhdl;
struct mem_ctl_info *mci;
struct tile_edac_priv *priv;
int rc;
sprintf(hv_file, "mshim/%d", pdev->id);
hv_devhdl = hv_dev_open((HV_VirtAddr)hv_file, 0);
if (hv_devhdl < 0) {
return -EINVAL;
}
/* A TILE MC has a single channel and one chip-select row. */
mci = edac_mc_alloc(sizeof(struct tile_edac_priv),
TILE_EDAC_NR_CSROWS, TILE_EDAC_NR_CHANS, pdev->id);
if (mci == NULL)
return -ENOMEM;
priv = mci->pvt_info;
priv->node = pdev->id;
priv->hv_devhdl = hv_devhdl;
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_SECDED;
mci->mod_name = DRV_NAME;
mci->ctl_name = "TILEPro_Memory_Controller";
mci->dev_name = dev_name(&pdev->dev);
mci->edac_check = tile_edac_check;
/*
* Initialize the MC control structure 'csrows' table
* with the mapping and control information.
*/
if (tile_edac_init_csrows(mci)) {
/* No csrows found. */
mci->edac_cap = EDAC_FLAG_NONE;
} else {
mci->edac_cap = EDAC_FLAG_SECDED;
}
platform_set_drvdata(pdev, mci);
/* Register with EDAC core */
rc = edac_mc_add_mc(mci);
if (rc) {
dev_err(&pdev->dev, "failed to register with EDAC core\n");
edac_mc_free(mci);
return rc;
}
return 0;
}
static int __devinit tile_edac_mc_probe(struct platform_device *pdev)
{
char hv_file[32];
int hv_devhdl;
struct mem_ctl_info *mci;
struct tile_edac_priv *priv;
int rc;
sprintf(hv_file, "mshim/%d", pdev->id);
hv_devhdl = hv_dev_open((HV_VirtAddr)hv_file, 0);
if (hv_devhdl < 0)
return -EINVAL;
mci = edac_mc_alloc(sizeof(struct tile_edac_priv),
TILE_EDAC_NR_CSROWS, TILE_EDAC_NR_CHANS, pdev->id);
if (mci == NULL)
return -ENOMEM;
priv = mci->pvt_info;
priv->node = pdev->id;
priv->hv_devhdl = hv_devhdl;
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_SECDED;
mci->mod_name = DRV_NAME;
#ifdef __tilegx__
mci->ctl_name = "TILEGx_Memory_Controller";
#else
mci->ctl_name = "TILEPro_Memory_Controller";
#endif
mci->dev_name = dev_name(&pdev->dev);
mci->edac_check = tile_edac_check;
if (tile_edac_init_csrows(mci)) {
mci->edac_cap = EDAC_FLAG_NONE;
} else {
mci->edac_cap = EDAC_FLAG_SECDED;
}
platform_set_drvdata(pdev, mci);
rc = edac_mc_add_mc(mci);
if (rc) {
dev_err(&pdev->dev, "failed to register with EDAC core\n");
edac_mc_free(mci);
return rc;
}
return 0;
}
static int r82600_probe1(struct pci_dev *pdev, int dev_idx)
{
struct mem_ctl_info *mci;
u8 dramcr;
u32 eapr;
u32 scrub_disabled;
u32 sdram_refresh_rate;
struct r82600_error_info discard;
debugf0("%s()\n", __func__);
pci_read_config_byte(pdev, R82600_DRAMC, &dramcr);
pci_read_config_dword(pdev, R82600_EAP, &eapr);
scrub_disabled = eapr & BIT(31);
sdram_refresh_rate = dramcr & (BIT(0) | BIT(1));
debugf2("%s(): sdram refresh rate = %#0x\n", __func__,
sdram_refresh_rate);
debugf2("%s(): DRAMC register = %#0x\n", __func__, dramcr);
mci = edac_mc_alloc(0, R82600_NR_CSROWS, R82600_NR_CHANS, 0);
if (mci == NULL)
return -ENOMEM;
debugf0("%s(): mci = %p\n", __func__, mci);
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_DDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
/* FIXME try to work out if the chip leads have been used for COM2
* instead on this board? [MA6?] MAYBE:
*/
/* On the R82600, the pins for memory bits 72:65 - i.e. the *
* EC bits are shared with the pins for COM2 (!), so if COM2 *
* is enabled, we assume COM2 is wired up, and thus no EDAC *
* is possible. */
mci->edac_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
if (ecc_enabled(dramcr)) {
if (scrub_disabled)
debugf3("%s(): mci = %p - Scrubbing disabled! EAP: "
"%#0x\n", __func__, mci, eapr);
} else
mci->edac_cap = EDAC_FLAG_NONE;
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = R82600_REVISION;
mci->ctl_name = "R82600";
mci->dev_name = pci_name(pdev);
mci->edac_check = r82600_check;
mci->ctl_page_to_phys = NULL;
r82600_init_csrows(mci, pdev, dramcr);
r82600_get_error_info(mci, &discard); /* clear counters */
/* Here we assume that we will never see multiple instances of this
* type of memory controller. The ID is therefore hardcoded to 0.
*/
if (edac_mc_add_mc(mci)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
goto fail;
}
/* get this far and it's successful */
if (disable_hardware_scrub) {
debugf3("%s(): Disabling Hardware Scrub (scrub on error)\n",
__func__);
pci_write_bits32(pdev, R82600_EAP, BIT(31), BIT(31));
}
/* allocating generic PCI control info */
r82600_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
if (!r82600_pci) {
printk(KERN_WARNING
"%s(): Unable to create PCI control\n",
__func__);
printk(KERN_WARNING
"%s(): PCI error report via EDAC not setup\n",
__func__);
}
debugf3("%s(): success\n", __func__);
return 0;
fail:
edac_mc_free(mci);
return -ENODEV;
}
static int __devinit mpc85xx_mc_err_probe(struct of_device *op,
const struct of_device_id *match)
{
struct mem_ctl_info *mci;
struct mpc85xx_mc_pdata *pdata;
struct resource r;
u32 sdram_ctl;
int res;
if (!devres_open_group(&op->dev, mpc85xx_mc_err_probe, GFP_KERNEL))
return -ENOMEM;
mci = edac_mc_alloc(sizeof(*pdata), 4, 1, edac_mc_idx);
if (!mci) {
devres_release_group(&op->dev, mpc85xx_mc_err_probe);
return -ENOMEM;
}
pdata = mci->pvt_info;
pdata->name = "mpc85xx_mc_err";
pdata->irq = NO_IRQ;
mci->dev = &op->dev;
pdata->edac_idx = edac_mc_idx++;
dev_set_drvdata(mci->dev, mci);
mci->ctl_name = pdata->name;
mci->dev_name = pdata->name;
res = of_address_to_resource(op->node, 0, &r);
if (res) {
printk(KERN_ERR "%s: Unable to get resource for MC err regs\n",
__func__);
goto err;
}
if (!devm_request_mem_region(&op->dev, r.start,
r.end - r.start + 1, pdata->name)) {
printk(KERN_ERR "%s: Error while requesting mem region\n",
__func__);
res = -EBUSY;
goto err;
}
pdata->mc_vbase = devm_ioremap(&op->dev, r.start, r.end - r.start + 1);
if (!pdata->mc_vbase) {
printk(KERN_ERR "%s: Unable to setup MC err regs\n", __func__);
res = -ENOMEM;
goto err;
}
sdram_ctl = in_be32(pdata->mc_vbase + MPC85XX_MC_DDR_SDRAM_CFG);
if (!(sdram_ctl & DSC_ECC_EN)) {
/* no ECC */
printk(KERN_WARNING "%s: No ECC DIMMs discovered\n", __func__);
res = -ENODEV;
goto err;
}
debugf3("%s(): init mci\n", __func__);
mci->mtype_cap = MEM_FLAG_RDDR | MEM_FLAG_RDDR2 |
MEM_FLAG_DDR | MEM_FLAG_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_SECDED;
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = MPC85XX_REVISION;
if (edac_op_state == EDAC_OPSTATE_POLL)
mci->edac_check = mpc85xx_mc_check;
mci->ctl_page_to_phys = NULL;
mci->scrub_mode = SCRUB_SW_SRC;
mpc85xx_set_mc_sysfs_attributes(mci);
mpc85xx_init_csrows(mci);
#ifdef CONFIG_EDAC_DEBUG
edac_mc_register_mcidev_debug((struct attribute **)debug_attr);
#endif
/* store the original error disable bits */
orig_ddr_err_disable =
in_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DISABLE);
out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DISABLE, 0);
/* clear all error bits */
out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_DETECT, ~0);
if (edac_mc_add_mc(mci)) {
debugf3("%s(): failed edac_mc_add_mc()\n", __func__);
goto err;
}
if (edac_op_state == EDAC_OPSTATE_INT) {
out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_INT_EN,
DDR_EIE_MBEE | DDR_EIE_SBEE);
/* store the original error management threshold */
orig_ddr_err_sbe = in_be32(pdata->mc_vbase +
MPC85XX_MC_ERR_SBE) & 0xff0000;
/* set threshold to 1 error per interrupt */
out_be32(pdata->mc_vbase + MPC85XX_MC_ERR_SBE, 0x10000);
/* register interrupts */
pdata->irq = irq_of_parse_and_map(op->node, 0);
res = devm_request_irq(&op->dev, pdata->irq,
mpc85xx_mc_isr,
IRQF_DISABLED | IRQF_SHARED,
"[EDAC] MC err", mci);
if (res < 0) {
printk(KERN_ERR "%s: Unable to request irq %d for "
"MPC85xx DRAM ERR\n", __func__, pdata->irq);
irq_dispose_mapping(pdata->irq);
res = -ENODEV;
goto err2;
}
printk(KERN_INFO EDAC_MOD_STR " acquired irq %d for MC\n",
pdata->irq);
}
devres_remove_group(&op->dev, mpc85xx_mc_err_probe);
debugf3("%s(): success\n", __func__);
printk(KERN_INFO EDAC_MOD_STR " MC err registered\n");
return 0;
err2:
edac_mc_del_mc(&op->dev);
err:
devres_release_group(&op->dev, mpc85xx_mc_err_probe);
edac_mc_free(mci);
return res;
}
static int __devinit i5100_init_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int rc;
struct mem_ctl_info *mci;
struct i5100_priv *priv;
struct pci_dev *ch0mm, *ch1mm;
int ret = 0;
u32 dw;
int ranksperch;
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
rc = pci_enable_device(pdev);
if (rc < 0) {
ret = rc;
goto bail;
}
/* ECC enabled? */
pci_read_config_dword(pdev, I5100_MC, &dw);
if (!i5100_mc_errdeten(dw)) {
printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
ret = -ENODEV;
goto bail_pdev;
}
/* figure out how many ranks, from strapped state of 48GB_Mode input */
pci_read_config_dword(pdev, I5100_MS, &dw);
ranksperch = !!(dw & (1 << 8)) * 2 + 4;
/* enable error reporting... */
pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw);
dw &= ~I5100_FERR_NF_MEM_ANY_MASK;
pci_write_config_dword(pdev, I5100_EMASK_MEM, dw);
/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5100_21, 0);
if (!ch0mm) {
ret = -ENODEV;
goto bail_pdev;
}
rc = pci_enable_device(ch0mm);
if (rc < 0) {
ret = rc;
goto bail_ch0;
}
/* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */
ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5100_22, 0);
if (!ch1mm) {
ret = -ENODEV;
goto bail_disable_ch0;
}
rc = pci_enable_device(ch1mm);
if (rc < 0) {
ret = rc;
goto bail_ch1;
}
mci = edac_mc_alloc(sizeof(*priv), ranksperch * 2, 1, 0);
if (!mci) {
ret = -ENOMEM;
goto bail_disable_ch1;
}
mci->dev = &pdev->dev;
priv = mci->pvt_info;
priv->ranksperchan = ranksperch;
priv->mc = pdev;
priv->ch0mm = ch0mm;
priv->ch1mm = ch1mm;
INIT_DELAYED_WORK(&(priv->i5100_scrubbing), i5100_refresh_scrubbing);
/* If scrubbing was already enabled by the bios, start maintaining it */
pci_read_config_dword(pdev, I5100_MC, &dw);
if (i5100_mc_scrben(dw)) {
priv->scrub_enable = 1;
schedule_delayed_work(&(priv->i5100_scrubbing),
I5100_SCRUB_REFRESH_RATE);
}
i5100_init_dimm_layout(pdev, mci);
i5100_init_interleaving(pdev, mci);
mci->mtype_cap = MEM_FLAG_FB_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_SECDED;
mci->mod_name = "i5100_edac.c";
mci->mod_ver = "not versioned";
mci->ctl_name = "i5100";
mci->dev_name = pci_name(pdev);
mci->ctl_page_to_phys = NULL;
mci->edac_check = i5100_check_error;
mci->set_sdram_scrub_rate = i5100_set_scrub_rate;
mci->get_sdram_scrub_rate = i5100_get_scrub_rate;
i5100_init_csrows(mci);
/* this strange construction seems to be in every driver, dunno why */
switch (edac_op_state) {
case EDAC_OPSTATE_POLL:
case EDAC_OPSTATE_NMI:
break;
default:
edac_op_state = EDAC_OPSTATE_POLL;
break;
}
if (edac_mc_add_mc(mci)) {
ret = -ENODEV;
goto bail_scrub;
}
return ret;
bail_scrub:
priv->scrub_enable = 0;
cancel_delayed_work_sync(&(priv->i5100_scrubbing));
edac_mc_free(mci);
bail_disable_ch1:
pci_disable_device(ch1mm);
bail_ch1:
pci_dev_put(ch1mm);
bail_disable_ch0:
pci_disable_device(ch0mm);
bail_ch0:
pci_dev_put(ch0mm);
bail_pdev:
pci_disable_device(pdev);
bail:
return ret;
}
static int octeon_lmc_edac_probe(struct platform_device *pdev)
{
struct mem_ctl_info *mci;
struct edac_mc_layer layers[1];
int mc = pdev->id;
opstate_init();
layers[0].type = EDAC_MC_LAYER_CHANNEL;
layers[0].size = 1;
layers[0].is_virt_csrow = false;
if (OCTEON_IS_MODEL(OCTEON_FAM_1_PLUS)) {
union cvmx_lmcx_mem_cfg0 cfg0;
cfg0.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(0));
if (!cfg0.s.ecc_ena) {
dev_info(&pdev->dev, "Disabled (ECC not enabled)\n");
return 0;
}
mci = edac_mc_alloc(mc, ARRAY_SIZE(layers), layers, sizeof(struct octeon_lmc_pvt));
if (!mci)
return -ENXIO;
mci->pdev = &pdev->dev;
mci->dev_name = dev_name(&pdev->dev);
mci->mod_name = "octeon-lmc";
mci->ctl_name = "octeon-lmc-err";
mci->edac_check = octeon_lmc_edac_poll;
if (edac_mc_add_mc_with_groups(mci, octeon_dev_groups)) {
dev_err(&pdev->dev, "edac_mc_add_mc() failed\n");
edac_mc_free(mci);
return -ENXIO;
}
cfg0.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(mc));
cfg0.s.intr_ded_ena = 0; /* We poll */
cfg0.s.intr_sec_ena = 0;
cvmx_write_csr(CVMX_LMCX_MEM_CFG0(mc), cfg0.u64);
} else {
/* OCTEON II */
union cvmx_lmcx_int_en en;
union cvmx_lmcx_config config;
config.u64 = cvmx_read_csr(CVMX_LMCX_CONFIG(0));
if (!config.s.ecc_ena) {
dev_info(&pdev->dev, "Disabled (ECC not enabled)\n");
return 0;
}
mci = edac_mc_alloc(mc, ARRAY_SIZE(layers), layers, sizeof(struct octeon_lmc_pvt));
if (!mci)
return -ENXIO;
mci->pdev = &pdev->dev;
mci->dev_name = dev_name(&pdev->dev);
mci->mod_name = "octeon-lmc";
mci->ctl_name = "co_lmc_err";
mci->edac_check = octeon_lmc_edac_poll_o2;
if (edac_mc_add_mc_with_groups(mci, octeon_dev_groups)) {
dev_err(&pdev->dev, "edac_mc_add_mc() failed\n");
edac_mc_free(mci);
return -ENXIO;
}
en.u64 = cvmx_read_csr(CVMX_LMCX_MEM_CFG0(mc));
en.s.intr_ded_ena = 0; /* We poll */
en.s.intr_sec_ena = 0;
cvmx_write_csr(CVMX_LMCX_MEM_CFG0(mc), en.u64);
}
platform_set_drvdata(pdev, mci);
return 0;
}
static int __devinit i5100_init_one(struct pci_dev *pdev,
const struct pci_device_id *id)
{
int rc;
struct mem_ctl_info *mci;
struct i5100_priv *priv;
struct pci_dev *ch0mm, *ch1mm;
int ret = 0;
u32 dw;
int ranksperch;
if (PCI_FUNC(pdev->devfn) != 1)
return -ENODEV;
rc = pci_enable_device(pdev);
if (rc < 0) {
ret = rc;
goto bail;
}
/* ECC enabled? */
pci_read_config_dword(pdev, I5100_MC, &dw);
if (!i5100_mc_errdeten(dw)) {
printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
ret = -ENODEV;
goto bail_pdev;
}
/* figure out how many ranks, from strapped state of 48GB_Mode input */
pci_read_config_dword(pdev, I5100_MS, &dw);
ranksperch = !!(dw & (1 << 8)) * 2 + 4;
if (ranksperch != 4) {
/* FIXME: get 6 ranks / controller to work - need hw... */
printk(KERN_INFO "i5100_edac: unsupported configuration.\n");
ret = -ENODEV;
goto bail_pdev;
}
/* enable error reporting... */
pci_read_config_dword(pdev, I5100_EMASK_MEM, &dw);
dw &= ~I5100_FERR_NF_MEM_ANY_MASK;
pci_write_config_dword(pdev, I5100_EMASK_MEM, dw);
/* device 21, func 0, Channel 0 Memory Map, Error Flag/Mask, etc... */
ch0mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5100_21, 0);
if (!ch0mm) {
ret = -ENODEV;
goto bail_pdev;
}
rc = pci_enable_device(ch0mm);
if (rc < 0) {
ret = rc;
goto bail_ch0;
}
/* device 22, func 0, Channel 1 Memory Map, Error Flag/Mask, etc... */
ch1mm = pci_get_device_func(PCI_VENDOR_ID_INTEL,
PCI_DEVICE_ID_INTEL_5100_22, 0);
if (!ch1mm) {
ret = -ENODEV;
goto bail_disable_ch0;
}
rc = pci_enable_device(ch1mm);
if (rc < 0) {
ret = rc;
goto bail_ch1;
}
mci = edac_mc_alloc(sizeof(*priv), ranksperch * 2, 1, 0);
if (!mci) {
ret = -ENOMEM;
goto bail_disable_ch1;
}
mci->dev = &pdev->dev;
priv = mci->pvt_info;
priv->ranksperctlr = ranksperch;
priv->mc = pdev;
priv->ch0mm = ch0mm;
priv->ch1mm = ch1mm;
i5100_init_dimm_layout(pdev, mci);
i5100_init_interleaving(pdev, mci);
mci->mtype_cap = MEM_FLAG_FB_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_SECDED;
mci->mod_name = "i5100_edac.c";
mci->mod_ver = "not versioned";
mci->ctl_name = "i5100";
mci->dev_name = pci_name(pdev);
mci->ctl_page_to_phys = NULL;
mci->edac_check = i5100_check_error;
i5100_init_csrows(mci);
/* this strange construction seems to be in every driver, dunno why */
switch (edac_op_state) {
case EDAC_OPSTATE_POLL:
case EDAC_OPSTATE_NMI:
break;
default:
edac_op_state = EDAC_OPSTATE_POLL;
break;
}
if (edac_mc_add_mc(mci)) {
ret = -ENODEV;
goto bail_mc;
}
return ret;
bail_mc:
edac_mc_free(mci);
bail_disable_ch1:
pci_disable_device(ch1mm);
bail_ch1:
pci_dev_put(ch1mm);
bail_disable_ch0:
pci_disable_device(ch0mm);
bail_ch0:
pci_dev_put(ch0mm);
bail_pdev:
pci_disable_device(pdev);
bail:
return ret;
}
static int tile_edac_mc_probe(struct platform_device *pdev)
{
char hv_file[32];
int hv_devhdl;
struct mem_ctl_info *mci;
struct edac_mc_layer layers[2];
struct tile_edac_priv *priv;
int rc;
sprintf(hv_file, "mshim/%d", pdev->id);
hv_devhdl = hv_dev_open((HV_VirtAddr)hv_file, 0);
if (hv_devhdl < 0)
return -EINVAL;
/* A TILE MC has a single channel and one chip-select row. */
layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
layers[0].size = TILE_EDAC_NR_CSROWS;
layers[0].is_virt_csrow = true;
layers[1].type = EDAC_MC_LAYER_CHANNEL;
layers[1].size = TILE_EDAC_NR_CHANS;
layers[1].is_virt_csrow = false;
mci = edac_mc_alloc(pdev->id, ARRAY_SIZE(layers), layers,
sizeof(struct tile_edac_priv));
if (mci == NULL)
return -ENOMEM;
priv = mci->pvt_info;
priv->node = pdev->id;
priv->hv_devhdl = hv_devhdl;
mci->pdev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_SECDED;
mci->mod_name = DRV_NAME;
#ifdef __tilegx__
mci->ctl_name = "TILEGx_Memory_Controller";
#else
mci->ctl_name = "TILEPro_Memory_Controller";
#endif
mci->dev_name = dev_name(&pdev->dev);
mci->edac_check = tile_edac_check;
/*
* Initialize the MC control structure 'csrows' table
* with the mapping and control information.
*/
if (tile_edac_init_csrows(mci)) {
/* No csrows found. */
mci->edac_cap = EDAC_FLAG_NONE;
} else {
mci->edac_cap = EDAC_FLAG_SECDED;
}
platform_set_drvdata(pdev, mci);
/* Register with EDAC core */
rc = edac_mc_add_mc(mci);
if (rc) {
dev_err(&pdev->dev, "failed to register with EDAC core\n");
edac_mc_free(mci);
return rc;
}
return 0;
}
static int __devinit pasemi_edac_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct mem_ctl_info *mci = NULL;
u32 errctl1, errcor, scrub, mcen;
pci_read_config_dword(pdev, MCCFG_MCEN, &mcen);
if (!(mcen & MCCFG_MCEN_MMC_EN))
return -ENODEV;
/*
* We should think about enabling other error detection later on
*/
pci_read_config_dword(pdev, MCDEBUG_ERRCTL1, &errctl1);
errctl1 |= MCDEBUG_ERRCTL1_SBE_LOG_EN |
MCDEBUG_ERRCTL1_MBE_LOG_EN |
MCDEBUG_ERRCTL1_RFL_LOG_EN;
pci_write_config_dword(pdev, MCDEBUG_ERRCTL1, errctl1);
mci = edac_mc_alloc(0, PASEMI_EDAC_NR_CSROWS, PASEMI_EDAC_NR_CHANS,
system_mmc_id++);
if (mci == NULL)
return -ENOMEM;
pci_read_config_dword(pdev, MCCFG_ERRCOR, &errcor);
errcor |= MCCFG_ERRCOR_RNK_FAIL_DET_EN |
MCCFG_ERRCOR_ECC_GEN_EN |
MCCFG_ERRCOR_ECC_CRR_EN;
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR | MEM_FLAG_RDDR;
mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_EC | EDAC_FLAG_SECDED;
mci->edac_cap = (errcor & MCCFG_ERRCOR_ECC_GEN_EN) ?
((errcor & MCCFG_ERRCOR_ECC_CRR_EN) ?
(EDAC_FLAG_EC | EDAC_FLAG_SECDED) : EDAC_FLAG_EC) :
EDAC_FLAG_NONE;
mci->mod_name = MODULE_NAME;
mci->dev_name = pci_name(pdev);
mci->ctl_name = "pasemi,pwrficient-mc";
mci->edac_check = pasemi_edac_check;
mci->ctl_page_to_phys = NULL;
pci_read_config_dword(pdev, MCCFG_SCRUB, &scrub);
mci->scrub_cap = SCRUB_FLAG_HW_PROG | SCRUB_FLAG_HW_SRC;
mci->scrub_mode =
((errcor & MCCFG_ERRCOR_ECC_CRR_EN) ? SCRUB_FLAG_HW_SRC : 0) |
((scrub & MCCFG_SCRUB_RGLR_SCRB_EN) ? SCRUB_FLAG_HW_PROG : 0);
if (pasemi_edac_init_csrows(mci, pdev,
(mci->edac_cap & EDAC_FLAG_SECDED) ?
EDAC_SECDED :
((mci->edac_cap & EDAC_FLAG_EC) ?
EDAC_EC : EDAC_NONE)))
goto fail;
/*
* Clear status
*/
pasemi_edac_get_error_info(mci);
if (edac_mc_add_mc(mci))
goto fail;
/* get this far and it's successful */
return 0;
fail:
edac_mc_free(mci);
return -ENODEV;
}
static int i3000_probe1(struct pci_dev *pdev, int dev_idx)
{
int rc;
int i;
struct mem_ctl_info *mci = NULL;
unsigned long last_cumul_size;
int interleaved, nr_channels;
unsigned char dra[I3000_RANKS / 2], drb[I3000_RANKS];
unsigned char *c0dra = dra, *c1dra = &dra[I3000_RANKS_PER_CHANNEL / 2];
unsigned char *c0drb = drb, *c1drb = &drb[I3000_RANKS_PER_CHANNEL];
unsigned long mchbar;
void __iomem *window;
debugf0("MC: %s()\n", __func__);
pci_read_config_dword(pdev, I3000_MCHBAR, (u32 *) & mchbar);
mchbar &= I3000_MCHBAR_MASK;
window = ioremap_nocache(mchbar, I3000_MMR_WINDOW_SIZE);
if (!window) {
printk(KERN_ERR "i3000: cannot map mmio space at 0x%lx\n",
mchbar);
return -ENODEV;
}
c0dra[0] = readb(window + I3000_C0DRA + 0); /* ranks 0,1 */
c0dra[1] = readb(window + I3000_C0DRA + 1); /* ranks 2,3 */
c1dra[0] = readb(window + I3000_C1DRA + 0); /* ranks 0,1 */
c1dra[1] = readb(window + I3000_C1DRA + 1); /* ranks 2,3 */
for (i = 0; i < I3000_RANKS_PER_CHANNEL; i++) {
c0drb[i] = readb(window + I3000_C0DRB + i);
c1drb[i] = readb(window + I3000_C1DRB + i);
}
iounmap(window);
/* Figure out how many channels we have.
*
* If we have what the datasheet calls "asymmetric channels"
* (essentially the same as what was called "virtual single
* channel mode" in the i82875) then it's a single channel as
* far as EDAC is concerned.
*/
interleaved = i3000_is_interleaved(c0dra, c1dra, c0drb, c1drb);
nr_channels = interleaved ? 2 : 1;
mci = edac_mc_alloc(0, I3000_RANKS / nr_channels, nr_channels, 0);
if (!mci)
return -ENOMEM;
debugf3("MC: %s(): init mci\n", __func__);
mci->dev = &pdev->dev;
mci->mtype_cap = MEM_FLAG_DDR2;
mci->edac_ctl_cap = EDAC_FLAG_SECDED;
mci->edac_cap = EDAC_FLAG_SECDED;
mci->mod_name = EDAC_MOD_STR;
mci->mod_ver = I3000_REVISION;
mci->ctl_name = i3000_devs[dev_idx].ctl_name;
mci->dev_name = pci_name(pdev);
mci->edac_check = i3000_check;
mci->ctl_page_to_phys = NULL;
/*
* The dram rank boundary (DRB) reg values are boundary addresses
* for each DRAM rank with a granularity of 32MB. DRB regs are
* cumulative; the last one will contain the total memory
* contained in all ranks.
*
* If we're in interleaved mode then we're only walking through
* the ranks of controller 0, so we double all the values we see.
*/
for (last_cumul_size = i = 0; i < mci->nr_csrows; i++) {
u8 value;
u32 cumul_size;
struct csrow_info *csrow = &mci->csrows[i];
value = drb[i];
cumul_size = value << (I3000_DRB_SHIFT - PAGE_SHIFT);
if (interleaved)
cumul_size <<= 1;
debugf3("MC: %s(): (%d) cumul_size 0x%x\n",
__func__, i, cumul_size);
if (cumul_size == last_cumul_size) {
csrow->mtype = MEM_EMPTY;
continue;
}
csrow->first_page = last_cumul_size;
csrow->last_page = cumul_size - 1;
csrow->nr_pages = cumul_size - last_cumul_size;
last_cumul_size = cumul_size;
csrow->grain = I3000_DEAP_GRAIN;
csrow->mtype = MEM_DDR2;
csrow->dtype = DEV_UNKNOWN;
csrow->edac_mode = EDAC_UNKNOWN;
}
/* Clear any error bits.
* (Yes, we really clear bits by writing 1 to them.)
*/
pci_write_bits16(pdev, I3000_ERRSTS, I3000_ERRSTS_BITS,
I3000_ERRSTS_BITS);
rc = -ENODEV;
if (edac_mc_add_mc(mci)) {
debugf3("MC: %s(): failed edac_mc_add_mc()\n", __func__);
goto fail;
}
/* allocating generic PCI control info */
i3000_pci = edac_pci_create_generic_ctl(&pdev->dev, EDAC_MOD_STR);
if (!i3000_pci) {
printk(KERN_WARNING
"%s(): Unable to create PCI control\n",
__func__);
printk(KERN_WARNING
"%s(): PCI error report via EDAC not setup\n",
__func__);
}
/* get this far and it's successful */
debugf3("MC: %s(): success\n", __func__);
return 0;
fail:
if (mci)
edac_mc_free(mci);
return rc;
}
