/*---------------------------------------------------------------------------*/
int main(void)
{
uint16_t plen;
init_serial();
init_mac(mymac);
init_udp_or_www_server(mymac,myip);
enc28j60Init(mymac);
enc28j60PhyWrite(PHLCON,0x476);
enc28j60EnableBroadcast();
xprintf(PSTR("Hello World!\r\n"));
/* main loop */
while(1)
{
/* poll hardware ethernet buffer */
plen = enc28j60PacketReceive(BUFFER_SIZE,buf);
/* any new message? */
if(plen > 0)
{
checkBootloaderCondition(buf);
}
}
return 0;
}
static struct pbuf *low_level_input( struct netif *netif )
{
struct pbuf *q,*p = NULL;
u16 Len = 0;
int i =0;
Len = enc28j60PacketReceive(1520 *4, Data_Buf); //返回接收到的数据包长度
if ( Len == 0 ) return 0;
p = pbuf_alloc(PBUF_RAW, Len, PBUF_POOL);
if (p != NULL)
{
for (q = p; q != NULL; q = q->next)
{
memcpy((u8_t*)q->payload, (u8_t*)&Data_Buf[i], q->len);
i = i + q->len;
}
if( i != p->tot_len ){ return 0;} //相等时表明到了数据尾
}
return p;
}
/**
* Should allocate a pbuf and transfer the bytes of the incoming
* packet from the interface into the pbuf.
*
* @param netif the lwip network interface structure for this ethernetif
* @return a pbuf filled with the received packet (including MAC header)
* NULL on memory error
*/
static struct pbuf * low_level_input(struct netif *netif)
{
struct pbuf *p, *q;
u16_t len;
//uint32_t l=0,i =0;
//FrameTypeDef frame;
//u8_t *buffer;
p = NULL;
/* Obtain the size of the packet and put it into the "len"
variable. */
len = enc28j60BeginPacketReceive();
if(!len) {
#ifdef DEBUG
debug_printf("ETH DEBUG: low_level_input %d\n\r", len);
#endif
return NULL;
}
#if ETH_PAD_SIZE
len += ETH_PAD_SIZE; /* allow room for Ethernet padding */
#endif
/* We allocate a pbuf chain of pbufs from the pool. */
p = pbuf_alloc(PBUF_RAW, len, PBUF_POOL);
if (p != NULL) {
#if ETH_PAD_SIZE
pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */
#endif
/* We iterate over the pbuf chain until we have read the entire
* packet into the pbuf. */
for(q = p; q != NULL; q = q->next) {
/* Read enough bytes to fill this pbuf in the chain. The
* available data in the pbuf is given by the q->len
* variable. */
//read data into(q->payload, q->len);
enc28j60PacketReceive(q->payload, q->len);
}
//acknowledge that packet has been read();
enc28j60EndPacketReceive();
#if ETH_PAD_SIZE
pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */
#endif
// LINK_STATS_INC(link.recv);
} else {
//drop packet();
enc28j60EndPacketReceive();
//LINK_STATS_INC(link.memerr);
//LINK_STATS_INC(link.drop);
}
return p;
}
struct pbuf *PacketReceive(struct netif *netif)
{
struct pbuf *p = NULL;
unsigned int recvlen = 0;
unsigned int i = 0;
struct pbuf *q = NULL;
recvlen = enc28j60PacketReceive(1500, MyRecvbuf);
if(!recvlen) //接收数据长度为0，直接返回空
{
return NULL;
}
//申请内核pbuf空间，为RAM类型
p = pbuf_alloc(PBUF_RAW, recvlen, PBUF_RAM);
if(!p) //申请失败，则返回空
{
LWIP_PLATFORM_DIAG(("PacketReceive: pbuf_alloc fail ,len=%"U32_F"\n\t", recvlen));
return NULL;
}
//申请成功，拷贝数据到pbuf中
q = p;
while(q != NULL)
{
memcpy(q->payload,&MyRecvbuf[i],q->len);
i += q->len;
q = q->next;
if(i >= recvlen) break;
}
return p;
}
uint16_t nic_poll(void)
{
uint16_t packetLength;
packetLength = enc28j60BeginPacketReceive();
// if there's no packet or an error - exit without ending the operation
if( !packetLength )
return 0;
// drop anything too big for the buffer
if( packetLength > UIP_BUFSIZE )
{
#ifdef DEBUG_SERIAL
printf("Recieved big packet %i bytes, dropping \r\n",(int)uip_len);
#endif
enc28j60EndPacketReceive();
return 0;
}
// copy the packet data into the uIP packet buffer
enc28j60PacketReceive( uip_buf, packetLength );
enc28j60EndPacketReceive();
#ifdef DEBUG_SERIAL
printf("Recieved & transferred to uip, packet %i bytes\r\n",(int)uip_len);
#endif
return packetLength;
}
int main(void){
uint16_t dat_p;
// set the clock speed to 8MHz
// set the clock prescaler. First write CLKPCE to enable setting of clock the
// next four instructions.
CLKPR=(1<<CLKPCE);
CLKPR=0; // 8 MHZ
_delay_loop_1(0); // 60us
//initialize the hardware driver for the enc28j60
enc28j60Init(mymac);
//enc28j60clkout(2); // change clkout from 6.25MHz to 12.5MHz
_delay_loop_1(0); // 60us
enc28j60PhyWrite(PHLCON,0x476);
PORTB = 0xff;
DDRB = 0xff;
uart_init();
sei();
xfunc_out = (void (*)(char))uart_put;
xputs(PSTR("AVR-Ethernet test monitor\n"));
xprintf(PSTR("ENC28J60 Rev.%d\n"), enc28j60getrev());
//init the ethernet/ip layer:
init_ip_arp_udp_tcp(mymac,myip,MYWWWPORT);
while(1){
// read packet, handle ping and wait for a tcp packet:
dat_p=packetloop_icmp_tcp(buf,enc28j60PacketReceive(BUFFER_SIZE, buf));
/* dat_p will be unequal to zero if there is a valid
* http get */
if(dat_p==0){
// no http request
continue;
}
// tcp port 80 begin
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0){
// head, post and other methods:
dat_p=http200ok();
dat_p=fill_tcp_data_p(buf,dat_p,PSTR("<h1>200 OK</h1>"));
goto SENDTCP;
}
// just one web page in the "root directory" of the web server
if (strncmp("/ ",(char *)&(buf[dat_p+4]),2)==0){
dat_p=print_webpage(buf);
goto SENDTCP;
}else{
dat_p=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
goto SENDTCP;
}
SENDTCP:
www_server_reply(buf,dat_p); // send web page data
// tcp port 80 end
}
return (0);
}
void NanodeUIP::poll(void) {
int i;
uip_len = enc28j60PacketReceive(UIP_BUFSIZE,uip_buf);
if(uip_len > 0) {
if(BUF->type == UIP_HTONS(UIP_ETHTYPE_IP)) {
uip_arp_ipin();
uip_input();
/* If the above function invocation resulted in data that
should be sent out on the network, the global variable
uip_len is set to a value > 0. */
if(uip_len > 0) {
uip_arp_out();
enc28j60PacketSend(uip_len,uip_buf);
}
} else if(BUF->type == UIP_HTONS(UIP_ETHTYPE_ARP)) {
uip_arp_arpin();
/* If the above function invocation resulted in data that
should be sent out on the network, the global variable
uip_len is set to a value > 0. */
if(uip_len > 0) {
enc28j60PacketSend(uip_len,uip_buf);
}
}
} else if(timer_expired(&periodic_timer)) {
timer_reset(&periodic_timer);
for(i = 0; i < UIP_CONNS; i++) {
uip_periodic(i);
/* If the above function invocation resulted in data that
should be sent out on the network, the global variable
uip_len is set to a value > 0. */
if(uip_len > 0) {
uip_arp_out();
enc28j60PacketSend(uip_len,uip_buf);
}
}
#if UIP_UDP
for(i = 0; i < UIP_UDP_CONNS; i++) {
uip_udp_periodic(i);
/* If the above function invocation resulted in data that
should be sent out on the network, the global variable
uip_len is set to a value > 0. */
if(uip_len > 0) {
uip_arp_out();
enc28j60PacketSend(uip_len,uip_buf);
}
}
#endif /* UIP_UDP */
/* Call the ARP timer function every 10 seconds. */
if(timer_expired(&arp_timer)) {
timer_reset(&arp_timer);
uip_arp_timer();
}
}
}
// Perform all processing to resolve a hostname to IP address.
// Returns 1 for successful Name resolution, 0 otherwise
uint8_t EtherShield::resolveHostname(uint8_t *buf, uint16_t buffer_size, uint8_t *hostname ) {
uint16_t dat_p;
int plen = 0;
long lastDnsRequest = millis();
uint8_t dns_state = DNS_STATE_INIT;
boolean gotAddress = false;
uint8_t dnsTries = 3; // After 10 attempts fail gracefully so other action can be carried out
while( !gotAddress ) {
// handle ping and wait for a tcp packet
plen = enc28j60PacketReceive(buffer_size, buf);
dat_p=packetloop_icmp_tcp(buf,plen);
// We have a packet
// Check if IP data
if (dat_p == 0) {
if (client_waiting_gw() ) {
// No ARP received for gateway
continue;
}
// It has IP data
if (dns_state==DNS_STATE_INIT) {
dns_state=DNS_STATE_REQUESTED;
lastDnsRequest = millis();
dnslkup_request(buf,hostname);
continue;
}
if (dns_state!=DNS_STATE_ANSWER){
// retry every minute if dns-lookup failed:
if (millis() > (lastDnsRequest + 60000L) ){
if( --dnsTries <= 0 )
return 0; // Failed to allocate address
dns_state=DNS_STATE_INIT;
lastDnsRequest = millis();
}
// don't try to use client before
// we have a result of dns-lookup
continue;
}
}
else {
if (dns_state==DNS_STATE_REQUESTED && udp_client_check_for_dns_answer( buf, plen ) ){
dns_state=DNS_STATE_ANSWER;
//client_set_wwwip(dnslkup_getip());
client_tcp_set_serverip(dnslkup_getip());
gotAddress = true;
}
}
}
return 1;
}
static struct pbuf *
low_level_2_input(struct netif *netif)
{
struct pbuf *p;
SYS_ARCH_DECL_PROTECT(sr);
SYS_ARCH_PROTECT(sr);
p = enc28j60PacketReceive();
SYS_ARCH_UNPROTECT(sr);
return p;
}
// Perform all processing to get an IP address plus other addresses returned, e.g. gw, dns, dhcp server.
// Returns 1 for successful IP address allocation, 0 otherwise
uint8_t EtherShield::allocateIPAddress(uint8_t *buf, uint16_t buffer_size, uint8_t *mymac, uint16_t myport, uint8_t *myip, uint8_t *mynetmask, uint8_t *gwip, uint8_t *dnsip, uint8_t *dhcpsvrip ) {
uint16_t dat_p;
int plen = 0;
long lastDhcpRequest = millis();
uint8_t dhcpState = 0;
boolean gotIp = false;
uint8_t dhcpTries = 10; // After 10 attempts fail gracefully so other action can be carried out
dhcp_start( buf, mymac, myip, mynetmask,gwip, dnsip, dhcpsvrip );
while( !gotIp ) {
// handle ping and wait for a tcp packet
plen = enc28j60PacketReceive(buffer_size, buf);
dat_p=packetloop_icmp_tcp(buf,plen);
if(dat_p==0) {
int retstat = check_for_dhcp_answer( buf, plen);
dhcpState = dhcp_state();
// we are idle here
if( dhcpState != DHCP_STATE_OK ) {
if (millis() > (lastDhcpRequest + 10000L) ){
lastDhcpRequest = millis();
if( --dhcpTries <= 0 )
return 0; // Failed to allocate address
// send dhcp
dhcp_start( buf, mymac, myip, mynetmask,gwip, dnsip, dhcpsvrip );
}
} else {
if( !gotIp ) {
gotIp = true;
//init the ethernet/ip layer:
init_ip_arp_udp_tcp(mymac, myip, myport);
// Set the Router IP
client_set_gwip(gwip); // e.g internal IP of dsl router
// Set the DNS server IP address if required, or use default
dnslkup_set_dnsip( dnsip );
}
}
}
}
return 1;
}
/**
* Should allocate a pbuf and transfer the bytes of the incoming
* packet from the interface into the pbuf.
*
* @param netif the lwip network interface structure for this ethernetif
* @return a pbuf filled with the received packet (including MAC header)
* NULL on memory error
*/
static struct pbuf *
low_level_input(struct netif *netif)
{
struct ethernetif *ethernetif = netif->state;
struct pbuf *q,*p = NULL;
u16 Len = 0;
int i =0;
/* Obtain the size of the packet and put it into the "len" variable. */
Len = enc28j60PacketReceive(1520 *4, Data_Buf); //返回接收到的数据包长度
#if ETH_PAD_SIZE
len += ETH_PAD_SIZE; /* allow room for Ethernet padding */
#endif
if ( Len == 0 ) return 0;
/* We allocate a pbuf chain of pbufs from the pool. */
p = pbuf_alloc(PBUF_RAW, Len, PBUF_POOL);
if (p != NULL)
{
#if ETH_PAD_SIZE
pbuf_header(p, -ETH_PAD_SIZE); /* drop the padding word */
#endif
/* We iterate over the pbuf chain until we have read the entire
* packet into the pbuf. */
for(q = p; q != NULL; q = q->next) {
memcpy((u8_t*)q->payload, (u8_t*)&Data_Buf[i], q->len);
i = i + q->len;
}
if( i != p->tot_len ){ return 0;} //相等时表明到了数据尾
}
return p;
#if ETH_PAD_SIZE
pbuf_header(p, ETH_PAD_SIZE); /* reclaim the padding word */
#endif
}
u8_t nic_poll(void)
{
u16_t packetLength;
packetLength = enc28j60PacketReceive(UIP_BUFSIZE, (uint8_t*)uip_buf);
// If there are no incoming data
if(!packetLength)
return packetLength = 0;
// If the length exceed the buffer size
if(packetLength > UIP_BUFSIZE)
return packetLength = 0;
// Return the length
return packetLength;
}
static uint16_t network_read(void) {
uint16_t len;
#if CONFIG_DRIVERS_ENC28J60
len = enc28j60PacketReceive(UIP_BUFSIZE, (uint8_t *)uip_buf);
#endif
#if CONFIG_DRIVERS_ENC424J600
len = enc424j600PacketReceive(UIP_BUFSIZE, (uint8_t *)uip_buf);
#endif
#if TCPDUMP
if (len > 0) {
printf_P(PSTR("IN: "));
tcpdump(uip_buf, len);
}
#endif
return len;
}
//Documentation in header file
uint8_t dhcp_requestIP(uint16_t timeout_ms)
{
//Get a timer
int8_t timer = timer_get();
timer_set(timer,timeout_ms);
//Send dhcp discover packet
dhcp_sendDiscover();
do
{
//Wait for a packet to arrive
//If no packets arrive in time, return 0
while(enc28j60Read(EPKTCNT) == 0)
if(timer_check(timer) == TIMER_EXPIRED)
{
//Release the timer
timer_release(timer);
return 0;
}
//Receive packet
ns.plength = enc28j60PacketReceive(ns.pbuf, ns.pbuf_size);
//Check if packet is DHCP!
if(ns.plength > 0)
if(getPacketType() == DHCP)
dhcp_handlePacket();
}
while(ns.ipAcquired == 0);
//Release the timer
timer_release(timer);
//Return success
return ns.ipAcquired;
}
int main(void){
uint16_t dat_p,plen;
int8_t cmd;
// Set the clock speed to "no pre-scaler" (8MHz with internal osc or
// full external speed)
// set the clock prescaler. First write CLKPCE to enable setting
// of clock the next four instructions.
// Note that the CKDIV8 Fuse determines the initial
// value of the CKKPS bits.
CLKPR=(1<<CLKPCE); // change enable
CLKPR=0; // "no pre-scaler"
_delay_loop_1(0); // 60us
/*initialize enc28j60*/
enc28j60Init(mymac);
enc28j60clkout(2); // change clkout from 6.25MHz to 12.5MHz
_delay_loop_1(0); // 60us
/* Magjack leds configuration, see enc28j60 datasheet, page 11 */
// LEDB=yellow LEDA=green
//
// 0x476 is PHLCON LEDA=links status, LEDB=receive/transmit
// enc28j60PhyWrite(PHLCON,0b0000 0100 0111 01 10);
enc28j60PhyWrite(PHLCON,0x476);
DDRB|= (1<<DDB1); // LED, enable PB1, LED as output
LEDOFF;
DDRD&= ~(1<<DDD6); // enable PB6, as input
PORTD|= (1<<PIND6); // internal pullup resistor on
init_cnt2();
sei();
//init the web server ethernet/ip layer:
init_ip_arp_udp_tcp(mymac,myip,MYWWWPORT);
// init the web client:
client_set_gwip(gwip); // e.g internal IP of dsl router
//
while(1){
// handle ping and wait for a tcp packet
plen=enc28j60PacketReceive(BUFFER_SIZE, buf);
dat_p=packetloop_icmp_tcp(buf,plen);
if(plen==0){
// we are idle here
if (client_waiting_gw() ){
continue;
}
if (dns_state==0){
sec=0;
dns_state=1;
dnslkup_request(buf,PSTR(WEBSERVER_VHOST));
continue;
}
if (dns_state==1 && dnslkup_haveanswer()){
dns_state=2;
client_set_wwwip(dnslkup_getip());
}
if (dns_state!=2){
// retry every minute if dns-lookup failed:
if (sec > 60){
dns_state=0;
}
// don't try to use web client before
// we have a result of dns-lookup
continue;
}
//----------
if (start_web_client==1){
LEDON;
start_web_client=2;
sec=0;
web_client_attempts++;
// the identi.ca line is status=Url_encoded_string
strcat(statusstr,"status=");
// the text to send to identi.ca (append after status=):
//urlencode("Meals are ready",&(statusstr[7]));
urlencode("I like tuxgraphics eth boards, ",&(statusstr[7]));
// append a number:
itoa(web_client_attempts,&(statusstr[strlen(statusstr)]),10);
// The BLOGGACCOUNT Authorization code can be generated from
// username and password of your identi.ca account
// by using this encoder: http://tuxgraphics.org/~guido/javascript/base64-javascript.html
client_http_post(PSTR("/api/statuses/update.xml"),PSTR(WEBSERVER_VHOST),PSTR(BLOGGACCOUNT),statusstr,&browserresult_callback);
}
// count how often the switch was triggered at all:
if (contact_debounce==0 && bit_is_clear(PIND,PIND6)){
contact_onoff_cnt++;
contact_debounce=1;
}
// we send only a request if we are in the right state (do
// not flood with request):
if (start_web_client==0 && bit_is_clear(PIND,PIND6)){
resend=1; // resend once if it failed
start_web_client=1;
}
// Reset after a delay of 3 min to prevent email sending.
// We reset only if the contact on PD6 was released.
if (start_web_client<=3 && sec==180 && !bit_is_clear(PIND,PIND6)){
start_web_client=0;
}
// Resend the message if it failed:
if (start_web_client==2 && sec==7 && resend){
start_web_client=1;
resend--;
}
continue;
}
if(dat_p==0){ // plen!=0
// check for incomming messages not processed
// as part of packetloop_icmp_tcp, e.g udp messages
udp_client_check_for_dns_answer(buf,plen);
continue;
}
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0){
// head, post and other methods:
//
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
dat_p=http200ok();
dat_p=fill_tcp_data_p(buf,dat_p,PSTR("<h1>200 OK</h1>"));
goto SENDTCP;
}
cmd=analyse_get_url((char *)&(buf[dat_p+4]));
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
if (cmd==-1){
dat_p=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
goto SENDTCP;
}
if (cmd==1 && start_web_client==4){
// email was off, switch on
start_web_client=0;
}
if (cmd==0 ){
start_web_client=4; // email off
}
dat_p=http200ok();
dat_p=print_webpage(buf);
//
SENDTCP:
www_server_reply(buf,dat_p); // send data
}
return (0);
}
unsigned int network_read(void){
return ((uint16_t) enc28j60PacketReceive(UIP_BUFSIZE, (uint8_t *)uip_buf));
}
//Read a packet from the controller and place it in the uIP buffer.
//The length of the packet is returned, 0 if no packet was waiting.
unsigned int network_read(void){
uint16_t len;
len=enc28j60PacketReceive(UIP_BUFSIZE, (uint8_t *)uip_buf);
return len;
}
int main(void){
uint16_t dat_p;
int8_t cmd;
// Set the clock speed to "no pre-scaler" (8MHz with internal osc or
// full external speed)
// set the clock prescaler. First write CLKPCE to enable setting
// of clock the next four instructions.
// Note that the CKDIV8 Fuse determines the initial
// value of the CKKPS bits.
CLKPR=(1<<CLKPCE); // change enable
CLKPR=0; // "no pre-scaler"
_delay_loop_1(0); // 60us
/*initialize enc28j60*/
enc28j60Init(mymac);
enc28j60clkout(2); // change clkout from 6.25MHz to 12.5MHz
_delay_loop_1(0); // 60us
/* Magjack leds configuration, see enc28j60 datasheet, page 11 */
// LEDB=yellow LEDA=green
//
// 0x476 is PHLCON LEDA=links status, LEDB=receive/transmit
// enc28j60PhyWrite(PHLCON,0b0000 0100 0111 01 10);
enc28j60PhyWrite(PHLCON,0x476);
DDRB|= (1<<DDB1); // LED, enable PB1, LED as output
LEDOFF;
DDRD&= ~(1<<DDD6); // enable PB6, as input
PORTD|= (1<<PIND6); // internal pullup resistor on
init_cnt2();
sei();
//init the web server ethernet/ip layer:
init_ip_arp_udp_tcp(mymac,myip,MYWWWPORT);
// init the web client:
client_set_gwip(gwip); // e.g internal IP of dsl router
client_set_wwwip(websrvip);
//
while(1){
// handle ping and wait for a tcp packet
dat_p=packetloop_icmp_tcp(buf,enc28j60PacketReceive(BUFFER_SIZE, buf));
if(dat_p==0){
if (start_web_client==1){
LEDON;
start_web_client=2;
sec=0;
web_client_attempts++;
// the text to send in the body of the mail:
urlencode("The door is open",urlvarstr);
// The string "test+emailnotify" is the subject line
// of the email. A plus sign translates into a space character.
// The MMaccountID is gus123, edit and replace by your own.
client_browse_url(PSTR("/cgi-bin/mm?a=gus123&s=test+emailnotify&d="),urlvarstr,PSTR(WEBSERVER_VHOST),&browserresult_callback);
}
// count how often the switch was triggered at all:
if (contact_debounce==0 && bit_is_clear(PIND,PIND6)){
contact_onoff_cnt++;
contact_debounce=1;
}
// we send only an email if we are in the right state (do
// not flood with email):
if (start_web_client==0 && bit_is_clear(PIND,PIND6)){
resend=1; // resend once if it failed
start_web_client=1;
}
// Reset after a delay of 3 min to prevent email sending.
// We reset only if the contact on PD6 was released.
if (start_web_client<=3 && sec==180 && !bit_is_clear(PIND,PIND6)){
start_web_client=0;
}
// Resend the email if it failed:
if (start_web_client==2 && sec==7 && resend){
start_web_client=1;
resend--;
}
continue;
}
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0){
// head, post and other methods:
//
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
dat_p=http200ok();
dat_p=fill_tcp_data_p(buf,dat_p,PSTR("<h1>200 OK</h1>"));
goto SENDTCP;
}
cmd=analyse_get_url((char *)&(buf[dat_p+4]));
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
if (cmd==-1){
dat_p=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
goto SENDTCP;
}
if (cmd==1 && start_web_client==4){
// email was off, switch on
start_web_client=0;
}
if (cmd==0 ){
start_web_client=4; // email off
}
dat_p=http200ok();
dat_p=print_webpage(buf);
//
SENDTCP:
www_server_reply(buf,dat_p); // send data
}
return (0);
}
static void _eth_spi_handle_frame() {
u16_t rx_stat;
int plen = enc28j60PacketReceive(ETHSPI_MAX_PKT_SIZE, ethspi.rxbuf, &rx_stat);
if (plen == 0) {
DBG(D_ETH, D_DEBUG, "ethspi no frame, rx_stat:%04x\n", rx_stat);
return;
}
#ifdef ETH_STATS
ethspi.rx_frames++;
ethspi.rx_data += plen;
#endif
DBG(D_ETH, D_DEBUG, "ethspi got frame, len %i, rx_stat:%04x\n", plen, rx_stat);
//printbuf(ethspi.rxbuf, MIN(64, plen));
// doing dhcp, do not allow anything else right now
if (ethspi.dhcp.query && ethspi.dhcp.active) {
int dhcp_res;
dhcp_res = check_for_dhcp_answer(ethspi.rxbuf, plen);
DBG(D_ETH, D_DEBUG, "ethspi DHCP:%i state:%i\n", dhcp_res, dhcp_state());
if (dhcp_state() == DHCP_STATE_OK) {
ethspi.dhcp.query = FALSE;
DBG(D_ETH, D_DEBUG, "ethspi DHCP OK\n");
DBG(D_ETH, D_INFO, "ethspi DHCP ip %i.%i.%i.%i\n", ethspi.dhcp.ipaddr[0], ethspi.dhcp.ipaddr[1], ethspi.dhcp.ipaddr[2], ethspi.dhcp.ipaddr[3]);
DBG(D_ETH, D_DEBUG, "ethspi DHCP gwip %i.%i.%i.%i\n", ethspi.dhcp.gwip[0], ethspi.dhcp.gwip[1], ethspi.dhcp.gwip[2], ethspi.dhcp.gwip[3]);
DBG(D_ETH, D_DEBUG, "ethspi DHCP mask %i.%i.%i.%i\n", ethspi.dhcp.mask[0], ethspi.dhcp.mask[1], ethspi.dhcp.mask[2], ethspi.dhcp.mask[3]);
DBG(D_ETH, D_DEBUG, "ethspi DHCP dhcp %i.%i.%i.%i\n", ethspi.dhcp.dhcp_server[0], ethspi.dhcp.dhcp_server[1], ethspi.dhcp.dhcp_server[2], ethspi.dhcp.dhcp_server[3]);
DBG(D_ETH, D_DEBUG, "ethspi DHCP dns %i.%i.%i.%i\n", ethspi.dhcp.dns_server[0], ethspi.dhcp.dns_server[1], ethspi.dhcp.dns_server[2], ethspi.dhcp.dns_server[3]);
memcpy(ip_address, ethspi.dhcp.ipaddr, 4);
set_ip(ethspi.dhcp.ipaddr);
client_set_gwip(ethspi.dhcp.gwip);
#ifdef CONFIG_ETH_DHCP_SHOW
print("eth ip address %i.%i.%i.%i\n", ethspi.dhcp.ipaddr[0], ethspi.dhcp.ipaddr[1], ethspi.dhcp.ipaddr[2], ethspi.dhcp.ipaddr[3]);
#endif
}
return;
}
// arp is broadcast if unknown but a host may also
// verify the mac address by sending it to
// a unicast address.
if (eth_type_is_arp_and_my_ip(ethspi.rxbuf, plen)) {
make_arp_answer_from_request(ethspi.rxbuf);
return;
}
// check if ip frames (icmp or udp) are for us or broadcast:
if (eth_type_is_ip_and_broadcast(ethspi.rxbuf, plen) == 0) {
if (eth_type_is_ip_and_my_ip(ethspi.rxbuf, plen) == 0) {
return;
}
if (ethspi.rxbuf[IP_PROTO_P]==IP_PROTO_ICMP_V &&
ethspi.rxbuf[ICMP_TYPE_P]==ICMP_TYPE_ECHOREQUEST_V){
// a ping frame, let's send pong
make_echo_reply_from_request(ethspi.rxbuf, plen);
return;
}
}
#if 0
// we listen on port 0xcafe
if (ethspi.rxbuf[IP_PROTO_P] == IP_PROTO_UDP_V
&& ethspi.rxbuf[UDP_DST_PORT_H_P] == 0xca && ethspi.rxbuf[UDP_DST_PORT_L_P] == 0xf) {
int payloadlen = ethspi.rxbuf[UDP_LEN_L_P];//plen - 34 - UDP_HEADER_LEN;
DBG(D_ETH, D_DEBUG, "ethspi UDP len:%i\n", payloadlen);
//char *nisse = "hello wurlde";
//make_udp_reply_from_request(ethbuf, nisse, strlen(nisse), 1200);
DBG(D_ETH, D_DEBUG, "ethspi eth mac dst: %02x.%02x.%02x.%02x.%02x.%02x\n",
ethspi.rxbuf[0], ethspi.rxbuf[1], ethspi.rxbuf[2], ethspi.rxbuf[3], ethspi.rxbuf[4], ethspi.rxbuf[5]); // ETH_DST_MAC
DBG(D_ETH, D_DEBUG, "ethspi eth mac src: %02x.%02x.%02x.%02x.%02x.%02x\n",
ethspi.rxbuf[6], ethspi.rxbuf[7], ethspi.rxbuf[8], ethspi.rxbuf[9], ethspi.rxbuf[10], ethspi.rxbuf[11]); // ETH_SRC_MAC
DBG(D_ETH, D_DEBUG, "ethspi eth type: %02x %02x\n",
ethspi.rxbuf[12], ethspi.rxbuf[13]); // ETH_TYPE_H_P, ETH_TYPE_L_P
DBG(D_ETH, D_DEBUG, "ethspi ip src: %i.%i.%i.%i\n",
ethspi.rxbuf[26], ethspi.rxbuf[27], ethspi.rxbuf[28], ethspi.rxbuf[29]); // IP_SRC_P
DBG(D_ETH, D_DEBUG, "ethspi ip dst: %i.%i.%i.%i\n",
ethspi.rxbuf[30], ethspi.rxbuf[31], ethspi.rxbuf[32], ethspi.rxbuf[33]); // IP_DST_P
DBG(D_ETH, D_DEBUG, "ethspi udp src port: %i\n",
(ethspi.rxbuf[34] << 8) | ethspi.rxbuf[35]); // UDP_SRC_PORT_H_P
DBG(D_ETH, D_DEBUG, "ethspi udp dst port: %i\n",
(ethspi.rxbuf[36] << 8) | ethspi.rxbuf[37]); // UDP_DST_PORT_H_P
DBG(D_ETH, D_DEBUG, "ethspi udp len: %04x\n",
(ethspi.rxbuf[38] << 8) | ethspi.rxbuf[39]); // UDP_LEN_H_P
DBG(D_ETH, D_DEBUG, "ethspi udp checksum: %04x\n",
(ethspi.rxbuf[40] << 8) | ethspi.rxbuf[41]); // UDP_CHECKSUM_H_P
}
IF_DBG(D_ETH, D_DEBUG) {
printbuf(ðspi.rxbuf[0], plen);
}
int main(void)
{
uint16_t dat_p;
ADC_init();
_delay_ms ( 100 );
//DDRB |= (1<<PB0);
initTimer();
//initialize the hardware driver for the enc28j60
enc28j60Init(mymac);
enc28j60clkout(2); // change clkout from 6.25MHz to 12.5MHz
_delay_loop_1(0); // 60us
enc28j60PhyWrite(PHLCON,0x476);
//init the ethernet/ip layer:
init_udp_or_www_server(mymac,myip);
www_server_port(MYWWWPORT);
while(1)
{
// read packet, handle ping and wait for a tcp packet:
dat_p=packetloop_arp_icmp_tcp(buf,enc28j60PacketReceive(BUFFER_SIZE, buf));
// dat_p will be unequal to zero if there is a valid http get
if(dat_p==0)
{
// no http request
continue;
}
// tcp port 80 begin
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0)
{
// head, post and other methods:
dat_p=http200ok();
dat_p=fill_tcp_data_p(buf,dat_p,PSTR("<h1>200 OK</h1>"));
www_server_reply(buf,dat_p);
continue;
}
// just one web page in the "root directory" of the web server
if (strncmp("/ ",(char *)&(buf[dat_p+4]),2)==0)
{
//dat_p=print_webpage(buf);
dat_p=printIndex(buf);
www_server_reply(buf,dat_p);
}
else if (strncmp("/now.htm", (char *)&(buf[dat_p+4]),8) == 0 )
{
dat_p = printNowHTML ( buf );
www_server_reply( buf, dat_p );
}
else if (strncmp("/min0.htm", (char *)&(buf[dat_p+4]),9) == 0 )
{
dat_p = printMinHTML ( buf, 0 );
www_server_reply( buf, dat_p );
}
else if (strncmp("/min1.htm", (char *)&(buf[dat_p+4]),9) == 0 )
{
dat_p = printMinHTML ( buf, 1 );
www_server_reply( buf, dat_p );
}
else if (strncmp("/wlcm.htm", (char *)&(buf[dat_p+4]),9) == 0 )
{
dat_p = printWelcomeHTML ( buf );
www_server_reply( buf, dat_p );
}
else
{
dat_p=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
www_server_reply(buf,dat_p);
}
}
return (0);
}
uint16_t etherdev_read(uint8_t *p_char)
{
return enc28j60PacketReceive(1500,p_char);
}
int simple_server(void)
{
unsigned int plen;
unsigned int dat_p;
unsigned char i=0;
unsigned char cmd_pos=0;
unsigned char cmd;
unsigned char payloadlen=0;
char str[30];
char cmdval;
// Del_1ms(100);
/*initialize enc28j60*/
enc28j60Init(mymac);
init_ip_arp_udp_tcp(mymac,myip,mywwwport);
//ָʾµÆ״̬:0x476 is PHLCON LEDA(ÂÌ)=links status, LEDB(ºì)=receive/transmit
enc28j60PhyWrite(PHLCON,0x7a4);
enc28j60clkout(2); // change clkout from 6.25MHz to 12.5MHz
// Del_1ms(20);
//init the ethernet/ip layer:
while(1)
{
// OSTimeDlyHMSM(0, 0, 0, 50);
// get the next new packet:
plen = enc28j60PacketReceive(BUFFER_SIZE, buf);
//USART_DMASendData(USART1,buf,plen);
/*plen will ne unequal to zero if there is a valid packet (without crc error) */
if(plen==0)
{
continue;
}
// arp is broadcast if unknown but a host may also
// verify the mac address by sending it to
// a unicast address.
if(eth_type_is_arp_and_my_ip(buf,plen))
{
make_arp_answer_from_request(buf);
//USART_DMASendText(USART1,"make_arp_answer_from_request\n");
continue;
}
// check if ip packets are for us:
if(eth_type_is_ip_and_my_ip(buf,plen)==0)
{
continue;
}
if(buf[IP_PROTO_P]==IP_PROTO_ICMP_V && buf[ICMP_TYPE_P]==ICMP_TYPE_ECHOREQUEST_V)
{
// a ping packet, let's send pong
make_echo_reply_from_request(buf, plen);
//USART_DMASendText(USART1,"make_echo_reply_from_request\n");
continue;
}
// tcp port www start, compare only the lower byte
if (buf[IP_PROTO_P]==IP_PROTO_TCP_V&&buf[TCP_DST_PORT_H_P]==0&&buf[TCP_DST_PORT_L_P]==mywwwport)
{
if (buf[TCP_FLAGS_P] & TCP_FLAGS_SYN_V)
{
make_tcp_synack_from_syn(buf);
// make_tcp_synack_from_syn does already send the syn,ack
continue;
}
if (buf[TCP_FLAGS_P] & TCP_FLAGS_ACK_V)
{
init_len_info(buf); // init some data structures
// we can possibly have no data, just ack:
dat_p=get_tcp_data_pointer();
if (dat_p==0)
{
if (buf[TCP_FLAGS_P] & TCP_FLAGS_FIN_V)
{
// finack, answer with ack
make_tcp_ack_from_any(buf);
}
// just an ack with no data, wait for next packet
continue;
}
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0)
{
// head, post and other methods:
//
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\n\r\n<h1>200 OK</h1>"));
goto SENDTCP;
}
if (strncmp("/ ",(char *)&(buf[dat_p+4]),2)==0)
{
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\n\r\n"));
plen=fill_tcp_data_p(buf,plen,PSTR("<p>Usage: "));
plen=fill_tcp_data(buf,plen,baseurl);
plen=fill_tcp_data_p(buf,plen,PSTR("password</p>"));
goto SENDTCP;
}
cmd=analyse_get_url((char *)&(buf[dat_p+5]));
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
if (cmd==-1)
{
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
goto SENDTCP;
}
if (cmd==1)
{
//PORTD|= (1<<PD7);// transistor on
//IOCLR |= (1<<26);
// LED1ON();
i=1;
}
if (cmd==0)
{
//PORTD &= ~(1<<PD7);// transistor off
//IOSET |= (1<<26);
// LED1OFF();
i=0;
}
// if (cmd==-2) or any other value
// just display the status:
plen=print_webpage(buf,(i));
SENDTCP:
make_tcp_ack_from_any(buf); // send ack for http get
make_tcp_ack_with_data(buf,plen); // send data
continue;
}
}
// tcp port www end
//
// udp start, we listen on udp port 1200=0x4B0
if (buf[IP_PROTO_P]==IP_PROTO_UDP_V&&buf[UDP_DST_PORT_H_P]==4&&buf[UDP_DST_PORT_L_P]==0xb0)
{
payloadlen=buf[UDP_LEN_L_P]-UDP_HEADER_LEN;
// you must sent a string starting with v
// e.g udpcom version 10.0.0.24
if (verify_password((char *)&(buf[UDP_DATA_P])))
{
// find the first comma which indicates
// the start of a command:
cmd_pos=0;
while(cmd_pos<payloadlen)
{
cmd_pos++;
if (buf[UDP_DATA_P+cmd_pos]==',')
{
cmd_pos++; // put on start of cmd
break;
}
}
// a command is one char and a value. At
// least 3 characters long. It has an '=' on
// position 2:
if (cmd_pos<2 || cmd_pos>payloadlen-3 || buf[UDP_DATA_P+cmd_pos+1]!='=')
{
strcpy(str,"e=no_cmd");
goto ANSWER;
}
// supported commands are
// t=1 t=0 t=?
if (buf[UDP_DATA_P+cmd_pos]=='t')
{
cmdval=buf[UDP_DATA_P+cmd_pos+2];
if(cmdval=='1')
{
//PORTD|= (1<<PD7);// transistor on
//IOCLR |= (1<<26);
//LED1ON();
strcpy(str,"t=1");
goto ANSWER;
}
else if(cmdval=='0')
{
//PORTD &= ~(1<<PD7);// transistor off
//IOSET |= (1<<26);
//LED1OFF();
strcpy(str,"t=0");
goto ANSWER;
}
else if(cmdval=='?')
{
/*
if (IOPIN & (1<<26))
{
strcpy(str,"t=1");
goto ANSWER;
}
*/
strcpy(str,"t=0");
goto ANSWER;
}
}
strcpy(str,"e=no_such_cmd");
goto ANSWER;
}
strcpy(str,"e=invalid_pw");
ANSWER:
make_udp_reply_from_request(buf,str,strlen(str),myudpport);
}
}
// return (0);
}
/**
* Handle Modbus requests
* Checks for new TCP data and looks for new modbus messages
**/
void mb_handleRequest(void) {
// read packet, handle ping and wait for a tcp packet
uint16_t dat_p = packetloop_icmp_tcp(buf,enc28j60PacketReceive(BUFFER_SIZE, buf));
// check if data was received
if (dat_p == 0)
return;
// make structure pointer to buffer
modbusmsg_t* msg = (modbusmsg_t*)&buf[dat_p];
// check for modbus protocol id
if (FROM_UINT16(msg->mbap.protoId) > 0)
return;
uint16_t len;
switch (msg->function) {
// Modbus read function
case MB_FUNC_READREG: {
readreg_req_t* req = (readreg_req_t*)&(msg->function);
readreg_res_t* res = (readreg_res_t*)&(msg->function);
uint16_t amount = FROM_UINT16(req->amount);
uint16_t addr = FROM_UINT16(req->start_address);
if (amount == 0 || amount > 0x7D) {
len = mb_set_error(msg,MB_ERR_DATA);
break;
}
if (addr + amount <= MODBUS_REGISTER_COUNT) {
uint16_t *ptr = (uint16_t*)&(res->function);
uint16_t cnt = 0;
for (; cnt < amount; cnt++) {
if (registers[addr+cnt] == NULL) {
len = mb_set_error(msg,MB_ERR_PROC);
break;
}
++ptr;
*ptr = TO_UINT16(*(registers[addr+cnt]));
}
// if an error occurred
if (cnt < amount)
break;
res->bytecount = cnt*sizeof(uint16_t);
len = sizeof(readreg_res_t)+cnt*sizeof(uint16_t);
} else
len = mb_set_error(msg,MB_ERR_ADDR);
break;
}
// Modbus write function
case MB_FUNC_WRITEREG: {
writereg_req_t* req = (writereg_req_t*)&(msg->function);
uint16_t addr = FROM_UINT16(req->start_address);
uint16_t value = FROM_UINT16(req->value);
if (addr >= MODBUS_REGISTER_COUNT || writecbs[addr] == NULL) {
len = mb_set_error(msg,MB_ERR_ADDR);
break;
}
if (writecbs[addr](addr,value))
len = sizeof(writereg_req_t);
else
len = mb_set_error(msg,MB_ERR_PROC);
break;
}
// Modbus device id function
// Not implemented completely
case MB_FUNC_DEV_ID: {
devid_req_t* req = (devid_req_t*)&(msg->function);
devid_res_t* res = (devid_res_t*)&(msg->function);
devid_obj_t* obj = (devid_obj_t*)&(res->nextobjid);
uint8_t i = req->objid;
if (req->type != 0x0E) {
len = mb_set_error(msg,MB_ERR_FUNC);
break;
}
if (!req->code || req->code > 4) {
len = mb_set_error(msg,MB_ERR_DATA);
break;
}
res->conflevel = 0x01;
res->more = 0x00;
res->nextobjid = 0x00;
res->amount = 3;
len = sizeof(devid_res_t);
if (i > 2)
i = 0;
// add requested objects
for (; i < 3; i++) {
++obj;
obj->id = i;
obj->length = 0;
len += sizeof(devid_obj_t)+obj->length;
}
break;
}
default: // set error
len = mb_set_error(msg,MB_ERR_FUNC);
break;
}
msg->mbap.length = TO_UINT16(len+1);
// send response
www_server_reply(buf,sizeof(mbap_t)+len);
}
int main(void){
uint16_t plen;
uint8_t i=0;
uint8_t cmd_pos=0;
uint8_t payloadlen=0;
char str[30];
char cmdval;
// set the clock speed to 8MHz
// set the clock prescaler. First write CLKPCE to enable setting of clock the
// next four instructions.
CLKPR=(1<<CLKPCE);
CLKPR=0; // 8 MHZ
delay_ms(10);
/* enable PB0, reset as output */
DDRB|= (1<<DDB0);
/* enable PD2/INT0, as input */
DDRD&= ~(1<<DDD2);
/* set output to gnd, reset the ethernet chip */
PORTB &= ~(1<<PB0);
delay_ms(10);
/* set output to Vcc, reset inactive */
PORTB|= (1<<PB0);
delay_ms(200);
/*initialize enc28j60*/
enc28j60Init(mymac);
delay_ms(20);
// LED
/* enable PB1, LED as output */
DDRB|= (1<<DDB1);
/* set output to Vcc, LED off */
PORTB|= (1<<PB1);
// the transistor on PD7
DDRD|= (1<<DDD7);
PORTD &= ~(1<<PD7);// transistor off
/* Magjack leds configuration, see enc28j60 datasheet, page 11 */
// LEDB=yellow LEDA=green
//
// 0x476 is PHLCON LEDA=links status, LEDB=receive/transmit
// enc28j60PhyWrite(PHLCON,0b0000 0100 0111 01 10);
enc28j60PhyWrite(PHLCON,0x476);
delay_ms(20);
/* set output to GND, red LED on */
PORTB &= ~(1<<PB1);
i=1;
//init the ethernet/ip layer:
init_ip_arp_udp(mymac,myip);
while(1){
// get the next new packet:
plen = enc28j60PacketReceive(BUFFER_SIZE, buf);
/*plen will ne unequal to zero if there is a valid
* packet (without crc error) */
if(plen==0){
continue;
}
// led----------
if (i){
/* set output to Vcc, LED off */
PORTB|= (1<<PB1);
i=0;
}else{
/* set output to GND, LED on */
PORTB &= ~(1<<PB1);
i=1;
}
// arp is broadcast if unknown but a host may also
// verify the mac address by sending it to
// a unicast address.
if(eth_type_is_arp_and_my_ip(buf,plen)){
make_arp_answer_from_request(buf,plen);
continue;
}
// check if ip packets (icmp or udp) are for us:
if(eth_type_is_ip_and_my_ip(buf,plen)==0){
continue;
}
if(buf[IP_PROTO_P]==IP_PROTO_ICMP_V && buf[ICMP_TYPE_P]==ICMP_TYPE_ECHOREQUEST_V){
// a ping packet, let's send pong
make_echo_reply_from_request(buf,plen);
continue;
}
// we listen on port 1200=0x4B0
if (buf[IP_PROTO_P]==IP_PROTO_UDP_V&&buf[UDP_DST_PORT_H_P]==4&&buf[UDP_DST_PORT_L_P]==0xb0){
payloadlen=buf[UDP_LEN_L_P]-UDP_HEADER_LEN;
// you must sent a string starting with v
// e.g udpcom version 10.0.0.24
if (verify_password((char *)&(buf[UDP_DATA_P]))){
// find the first comma which indicates
// the start of a command:
cmd_pos=0;
while(cmd_pos<payloadlen){
cmd_pos++;
if (buf[UDP_DATA_P+cmd_pos]==','){
cmd_pos++; // put on start of cmd
break;
}
}
// a command is one char and a value. At
// least 3 characters long. It has an '=' on
// position 2:
if (cmd_pos<2 || cmd_pos>payloadlen-3 || buf[UDP_DATA_P+cmd_pos+1]!='='){
strcpy(str,"e=no_cmd");
goto ANSWER;
}
// supported commands are
// t=1 t=0 t=?
if (buf[UDP_DATA_P+cmd_pos]=='t'){
cmdval=buf[UDP_DATA_P+cmd_pos+2];
if(cmdval=='1'){
PORTD|= (1<<PD7);// transistor on
strcpy(str,"t=1");
goto ANSWER;
}else if(cmdval=='0'){
PORTD &= ~(1<<PD7);// transistor off
strcpy(str,"t=0");
goto ANSWER;
}else if(cmdval=='?'){
if (PORTD & (1<<PD7)){
strcpy(str,"t=1");
goto ANSWER;
}
strcpy(str,"t=0");
goto ANSWER;
}
}
strcpy(str,"e=no_such_cmd");
goto ANSWER;
}
strcpy(str,"e=invalid_pw");
ANSWER:
make_udp_reply_from_request(buf,str,strlen(str),myport);
}
}
return (0);
}
int main(void){
uint16_t plen;
uint16_t dat_p;
uint8_t i=0;
uint8_t payloadlen=0;
// set the clock speed to 8MHz
// set the clock prescaler. First write CLKPCE to enable setting of clock the
// next four instructions.
//CLKPR=(1<<CLKPCE);
//CLKPR=0; // 8 MHZ
_delay_loop_1(50); // 12ms
// LED
/* enable PB1, LED as output */
DDRB|= (1<<DDB1);
/* one blink for indicate of start programm */
cbi(PORTB, PORTB1); // on
_delay_ms(100);
sbi(PORTB,PORTB1); // off
_delay_ms(100);
cbi(PORTB,PORTB1); // on
/*initialize enc28j60*/
enc28j60Init(mymac);
enc28j60clkout(2); // change clkout from 6.25MHz to 12.5MHz
_delay_loop_1(50); // 12ms
/* Magjack leds configuration, see enc28j60 datasheet, page 11 */
// LEDB=yellow LEDA=green
//
// 0x476 is PHLCON LEDA=links status, LEDB=receive/transmit
// enc28j60PhyWrite(PHLCON,0b0000 0100 0111 01 10);
enc28j60PhyWrite(PHLCON,0x476);
_delay_loop_1(50); // 12ms
/* set output to GND, red LED on */
PORTB &= ~(1<<PORTB1);
i=1;
//init the ethernet/ip layer:
init_ip_arp_udp_tcp(mymac,myip,MYWWWPORT);
while(1){
// get the next new packet:
plen = enc28j60PacketReceive(BUFFER_SIZE, buf);
/*plen will ne unequal to zero if there is a valid
* packet (without crc error) */
if(plen==0){
continue;
}
// arp is broadcast if unknown but a host may also
// verify the mac address by sending it to
// a unicast address.
if(eth_type_is_arp_and_my_ip(buf,plen)){
make_arp_answer_from_request(buf);
continue;
}
// check if ip packets (icmp or udp) are for us:
if(eth_type_is_ip_and_my_ip(buf,plen)==0){
continue;
}
if (i){
/* set output to Vcc, LED off */
PORTB|= (1<<PORTB1);
i=0;
}else{
/* set output to GND, LED on */
PORTB &= ~(1<<PORTB1);
i=1;
}
if(buf[IP_PROTO_P]==IP_PROTO_ICMP_V && buf[ICMP_TYPE_P]==ICMP_TYPE_ECHOREQUEST_V){
// a ping packet, let's send pong
make_echo_reply_from_request(buf,plen);
continue;
}
// tcp port www start, compare only the lower byte
if (buf[IP_PROTO_P]==IP_PROTO_TCP_V&&buf[TCP_DST_PORT_H_P]==0&&buf[TCP_DST_PORT_L_P]==MYWWWPORT){
if (buf[TCP_FLAGS_P] & TCP_FLAGS_SYN_V){
make_tcp_synack_from_syn(buf);
// make_tcp_synack_from_syn does already send the syn,ack
continue;
}
if (buf[TCP_FLAGS_P] & TCP_FLAGS_ACK_V){
init_len_info(buf); // init some data structures
// we can possibly have no data, just ack:
dat_p=get_tcp_data_pointer();
if (dat_p==0){
if (buf[TCP_FLAGS_P] & TCP_FLAGS_FIN_V){
// finack, answer with ack
make_tcp_ack_from_any(buf);
}
// just an ack with no data, wait for next packet
continue;
}
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0){
// head, post and other methods:
//
// for possible status codes see:
// http://www.w3.org/Protocols/rfc2616/rfc2616-sec10.html
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\n\r\n<h1>200 OK</h1>"));
}else{
// the "get" method
plen=fill_tcp_data_p(buf,0,PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\n\r\n<p>OK, it works</p>"));
}
make_tcp_ack_from_any(buf); // send ack for http get
make_tcp_ack_with_data(buf,plen); // send data
continue;
}
}
// udp interface:
if (buf[IP_PROTO_P]==IP_PROTO_UDP_V){
payloadlen=buf[UDP_LEN_L_P]-UDP_HEADER_LEN;
// the received command has to start with t and be 4 char long
// e.g "test\0"
if (buf[UDP_DATA_P]=='t' && payloadlen==5){
make_udp_reply_from_request(buf,"hello",6,MYUDPPORT);
}
}
}
return (0);
}
int simple_servercycle(void)
{
uchar tIPAddr[4];
char i,nS,freeSlot;
unsigned int j;
// OSTimeDlyHMSM(0, 0, 0, 50);
// get the next new packet:
plen = enc28j60PacketReceive(BUFFER_SIZE, fbuf);
//USART_DMASendData(USART1,fbuf,plen);
/*plen will ne unequal to zero if there is a valid packet (without crc error) */
if(plen==0)
{
return;
}
// arp is broadcast if unknown but a host may also
// verify the mac address by sending it to
// a unicast address.
if(eth_type_is_arp_and_my_ip(fbuf,plen))
{
make_arp_answer_from_request(fbuf);
//USART_DMASendText(USART1,"make_arp_answer_from_request\n");
return;
}
// check if ip packets are for us:
if(eth_type_is_ip_and_my_ip(fbuf,plen)==0)
{
return;
}
if(fbuf[IP_PROTO_P]==IP_PROTO_ICMP_V && fbuf[ICMP_TYPE_P]==ICMP_TYPE_ECHOREQUEST_V)
{
// a ping packet, let's send pong
make_echo_reply_from_request(fbuf, plen);
//USART_DMASendText(USART1,"make_echo_reply_from_request\n");
return;
}
// tcp port www start, compare only the lower byte
if (fbuf[IP_PROTO_P]==IP_PROTO_TCP_V&&fbuf[TCP_DST_PORT_H_P]==(*PORTNUMBER)/256&&fbuf[TCP_DST_PORT_L_P]==(*PORTNUMBER)%256)
{
nS=101;
freeSlot=9;
for (i=0;i<MAX_SOCKET_COUNT;i++)
{
Sockets[i].Timeout--;
if (Sockets[i].Timeout<0)
{
Sockets[i].Timeout=0;
Sockets[i].IP_PHASE=0;
}
if (!Sockets[i].IP_PHASE) freeSlot=i;
BufCpy(tIPAddr,Sockets[i].IP_source,4);
if (check_ip_scr(fbuf,tIPAddr))
{
nS=i;break;
}
}
if (nS>100) nS=freeSlot;
//nS=0;
if (fbuf[TCP_FLAGS_P] & TCP_FLAGS_SYN_V)
{
make_tcp_synack_from_syn(fbuf);
// make_tcp_synack_from_syn does already send the syn,ack
Sockets[nS].IP_PHASE=ETH_HEAD;
Sockets[nS].Timeout=20;
BufCpy(Sockets[nS].IP_source,tIPAddr,4);
return;
}
if (fbuf[TCP_FLAGS_P] & TCP_FLAGS_ACK_V)
{
GlobData++;
init_len_info(fbuf); // init some data structures
// we can possibly have no data, just ack:
dat_p=get_tcp_data_pointer();
if (dat_p==0)
{
if (fbuf[TCP_FLAGS_P] & TCP_FLAGS_FIN_V)
{
// finack, answer with ack
make_tcp_ack_from_any(fbuf);
return;
}
// just an ack with no data, wait for next packet
}
else
{
j=checksum(&fbuf[IP_SRC_P], 8+TCP_HEADER_LEN_PLAIN+info_data_len,2);
if (j) return;
}
check_ip_scr(fbuf,tIPAddr);
// GlobData++;
BufCpy(Sockets[nS].IP_source,tIPAddr,4);
SocketUpdate(nS,fbuf,dat_p,&plen);
if (plen)
make_tcp_ack_with_data(fbuf,plen,0); // send data
else
make_tcp_ack_from_any(fbuf); // send ack for http get
return;
}
}
// tcp port www end
//
}
/*
* Main entry point
*/
int main(void) {
//=====init green led
LEDInit();
LEDSet(1);
//=====setup eth interface
uint16_t plen = 0, dat_p = 0;
//initialize enc28j60
enc28j60Init(mymac);
_delay_ms(100);
// Magjack leds configuration, see enc28j60 datasheet, page 11
// LEDB=yellow LEDA=green
// 0x476 is PHLCON LEDA=links status, LEDB=receive/transmit
// enc28j60PhyWrite(PHLCON,0b0000 0100 0111 01 10);
enc28j60PhyWrite(PHLCON,0x476);
_delay_ms(100);
//init the ethernet/ip layer:
init_udp_or_www_server(mymac,myip);
www_server_port(MYWWWPORT);
register_ping_rec_callback(PingCallback);
while(1){
// handle ping and wait for a tcp packet:
dat_p = packetloop_arp_icmp_tcp(buf, enc28j60PacketReceive(BUFFER_SIZE, buf));
// dat_p will be unequal to zero if there is a valid http get
if(dat_p==0){
// do nothing
continue;
}
// tcp port 80 begin
if (strncmp("GET ",(char *)&(buf[dat_p]),4)!=0){
dat_p = fill_tcp_data_p(buf, 0, PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\nPragma: no-cache\r\n\r\n"));
dat_p = fill_tcp_data_p(buf, dat_p, PSTR("<h1>200 OK</h1>"));
goto SENDTCP;
}
if (strncmp("/ ",(char *) & (buf[ dat_p + 4] ), 2) == 0 ){
nAccessCount++;
dat_p = fill_tcp_data_p(buf, 0, PSTR("HTTP/1.0 200 OK\r\nContent-Type: text/html\r\nPragma: no-cache\r\n\r\n"));
// webcontent
char szWebText[130] = {0};
sprintf(szWebText,
"<b>ATmega8 Webserver / ENC28J60</b><br><br>Server stats:<br>Acc:%d Png:%d<br><br>(C) Radu Motisan 2012, www.pocketmagic.net<br/>Tomasz Jokiel",
nAccessCount, nPingCount);
dat_p = fill_tcp_data(buf, dat_p, szWebText);
//
goto SENDTCP;
}
// all other URLs:
dat_p = fill_tcp_data_p(buf, 0, PSTR("HTTP/1.0 401 Unauthorized\r\nContent-Type: text/html\r\n\r\n<h1>401 Unauthorized</h1>"));
SENDTCP:
www_server_reply(buf, dat_p); // send web page data
}
return (0);
}
uint16_t network_read(uint16_t size, uint8_t * buffer) {
return enc28j60PacketReceive(size, buffer);
}
uint16_t EtherShield::ES_enc28j60PacketReceive(uint16_t len, uint8_t* packet){
return enc28j60PacketReceive(len, packet);
}
uint32_t net_recv() {
net_nrecv = enc28j60PacketReceive(1500, &net_buffer);
return net_nrecv;
}
