Exemplo n.º 1
0
static int acc_function_set_alt(struct usb_function *f,
		unsigned intf, unsigned alt)
{
	struct acc_dev	*dev = func_to_dev(f);
	struct usb_composite_dev *cdev = f->config->cdev;
	int ret;

	DBG(cdev, "acc_function_set_alt intf: %d alt: %d\n", intf, alt);
	ret = usb_ep_enable(dev->ep_in,
			ep_choose(cdev->gadget,
				&acc_highspeed_in_desc,
				&acc_fullspeed_in_desc));
	if (ret)
		return ret;
	ret = usb_ep_enable(dev->ep_out,
			ep_choose(cdev->gadget,
				&acc_highspeed_out_desc,
				&acc_fullspeed_out_desc));
	if (ret) {
		usb_ep_disable(dev->ep_in);
		return ret;
	}

	dev->online = 1;

	/* readers may be blocked waiting for us to go online */
	wake_up(&dev->read_wq);

#ifdef CONFIG_ANDROID_PANTECH_USB_MANAGER
	usb_interface_enum_cb(ACCESSORY_TYPE_FLAG);
#endif
	return 0;
}
Exemplo n.º 2
0
static int acc_function_set_alt(struct usb_function *f,
		unsigned intf, unsigned alt)
{
	struct acc_dev	*dev = func_to_dev(f);
	struct usb_composite_dev *cdev = f->config->cdev;
	int ret;

	DBG(cdev, "acc_function_set_alt intf: %d alt: %d\n", intf, alt);
	ret = usb_ep_enable(dev->ep_in,
			ep_choose(cdev->gadget,
				&acc_highspeed_in_desc,
				&acc_fullspeed_in_desc));
	if (ret)
		return ret;
	ret = usb_ep_enable(dev->ep_out,
			ep_choose(cdev->gadget,
				&acc_highspeed_out_desc,
				&acc_fullspeed_out_desc));
	if (ret) {
		usb_ep_disable(dev->ep_in);
		return ret;
	}
	if (!dev->function.hidden)
		dev->online = 1;

	/* readers may be blocked waiting for us to go online */
	wake_up(&dev->read_wq);
	return 0;
}
Exemplo n.º 3
0
static int dtf_function_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
	struct dtf_dev *dev = func_to_dtf(f);
	struct usb_composite_dev *cdev = f->config->cdev;
	int ret;
	int set_alt_end = 0;
	int speed_check = 0;

	_dbgmsg("dtf_function_set_alt(intf=%d,alt=%d)\n", intf, alt);		/* MSEMSEMSE */

	if( dev->pg.mCtrl_id == intf ) {
		_dbgmsg_gadget( "usb_ep_enable(%s)\n", dev->pg.ep_intr->name );	/* MSEMSEMSE */
		ret = usb_ep_enable( dev->pg.ep_intr,
				     ep_choose( cdev->gadget, &vPg1_epintr_desc_hs, &vPg1_epintr_desc ) );
		if( ret ) {
			_dbgmsg( "usb_ep_enable error pg1 ep_intr ret = %d\n", ret );/* MSEMSEMSE */
			return ret;
		}
        dev->mCtrl_ep_enbl = 1;
	} else if( dev->pg.mData_id == intf ) {
		_dbgmsg_gadget( "usb_ep_enable(%s)\n", dev->pg.ep_in->name );	/* MSEMSEMSE */
		ret = usb_ep_enable( dev->pg.ep_in,
				     ep_choose( cdev->gadget, &vPg1_epin_desc_hs, &vPg1_epin_desc ) );
		if( ret ) {
			_dbgmsg( "usb_ep_enable error pg1 ep_in ret = %d\n", ret );	/* MSEMSEMSE */
			return ret;
		}
		_dbgmsg_gadget( "usb_ep_enable(%s)\n", dev->pg.ep_out->name );	/* MSEMSEMSE */
		ret = usb_ep_enable( dev->pg.ep_out,
				     ep_choose( cdev->gadget, &vPg1_epout_desc_hs, &vPg1_epout_desc ) );
		if( ret ) {
			_dbgmsg( "usb_ep_enable error pg1 ep_out ret = %d\n", ret );/* MSEMSEMSE */
			usb_ep_disable(dev->pg.ep_in);
			return ret;
		}

		dev->pg.mReq_out->length = 512;
		usb_ep_queue( dev->pg.ep_out, dev->pg.mReq_out, GFP_ATOMIC );
        dev->mData_ep_enbl = 1;

	} else {
		_dbgmsg( "unknown interface number\n" );	/* MSEMSEMSE */
	}

	set_alt_end = (
		(dev->mCtrl_ep_enbl) & (dev->mData_ep_enbl) );
	speed_check = (dev->cdev->gadget->speed == USB_SPEED_HIGH)?(1):(0);

	if (set_alt_end == 1)
	{
		dtf_if_out_set_alt( speed_check );
	}

	return 0;
}
Exemplo n.º 4
0
static int mtp_function_set_alt(struct usb_function *f,
		unsigned intf, unsigned alt)
{
	int ret;

	printk(KERN_DEBUG "%s intf=%d alt=%d\n", __func__, intf, alt);
	ret = usb_ep_enable(g_usb_mtp_context.bulk_in,
			ep_choose(g_usb_mtp_context.cdev->gadget,
				&hs_bulk_in_desc,
				&fs_bulk_in_desc));
	if (ret)
		return ret;
	ret = usb_ep_enable(g_usb_mtp_context.bulk_out,
			ep_choose(g_usb_mtp_context.cdev->gadget,
				&hs_bulk_out_desc,
				&fs_bulk_out_desc));
	if (ret) {
		usb_ep_disable(g_usb_mtp_context.bulk_in);
		return ret;
	}

	ret = usb_ep_enable(g_usb_mtp_context.intr_in,
			ep_choose(g_usb_mtp_context.cdev->gadget,
				&hs_intr_in_desc,
				&fs_intr_in_desc));
	if (ret) {
		usb_ep_disable(g_usb_mtp_context.bulk_in);
		usb_ep_disable(g_usb_mtp_context.bulk_out);
		return ret;
	}

	usb_interface_enum_cb(MTP_TYPE_FLAG);

	g_usb_mtp_context.cur_read_req = 0;
	g_usb_mtp_context.read_buf = 0;
	g_usb_mtp_context.data_len = 0;

	/* we're online -- get all rx requests queued */
	start_out_receive();

	g_usb_mtp_context.online = 1;
	g_usb_mtp_context.cancel = 0;
	g_usb_mtp_context.ctl_cancel = 0;
	g_usb_mtp_context.error = 0;

	/* readers may be blocked waiting for us to go online */
	wake_up(&g_usb_mtp_context.rx_wq);
	return 0;
}
Exemplo n.º 5
0
static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
	struct f_gser		*gser = func_to_gser(f);
	struct usb_composite_dev *cdev = f->config->cdev;
	int rc = 0;

	/* we know alt == 0, so this is an activation or a reset */

#ifdef CONFIG_MODEM_SUPPORT
	if (gser->notify->driver_data) {
		DBG(cdev, "reset generic ctl ttyGS%d\n", gser->port_num);
		usb_ep_disable(gser->notify);
	}
	gser->notify_desc = ep_choose(cdev->gadget,
			gser->hs.notify,
			gser->fs.notify);
	rc = usb_ep_enable(gser->notify, gser->notify_desc);
	if (rc) {
		ERROR(cdev, "can't enable %s, result %d\n",
					gser->notify->name, rc);
		return rc;
	}
	gser->notify->driver_data = gser;
#endif

	if (gser->port.in->driver_data) {
		DBG(cdev, "reset generic data ttyGS%d\n", gser->port_num);
		gport_disconnect(gser);
	} else {
		DBG(cdev, "activate generic data ttyGS%d\n", gser->port_num);
	}
	gser->port.in_desc = ep_choose(cdev->gadget,
			gser->hs.in, gser->fs.in);
	gser->port.out_desc = ep_choose(cdev->gadget,
			gser->hs.out, gser->fs.out);

#ifdef FEATURE_PANTECH_MODEM_REOPEN_DELAY
	schedule_delayed_work(&gser->connect_work, msecs_to_jiffies(50));
#else
	gport_connect(gser);
#endif
	gser->online = 1;

#ifdef CONFIG_ANDROID_PANTECH_USB_MANAGER
	usb_interface_enum_cb(ACM_TYPE_FLAG);
#endif
	return rc;
}
Exemplo n.º 6
0
static int gser_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
	struct f_gser		*gser = func_to_gser(f);
	struct usb_composite_dev *cdev = f->config->cdev;
	int rc = 0;

	/* we know alt == 0, so this is an activation or a reset */

#ifdef CONFIG_MODEM_SUPPORT
	if (gser->notify->driver_data) {
		DBG(cdev, "reset generic ctl ttyGS%d\n", gser->port_num);
		usb_ep_disable(gser->notify);
	}
	gser->notify_desc = ep_choose(cdev->gadget,
			gser->hs.notify,
			gser->fs.notify);
	rc = usb_ep_enable(gser->notify, gser->notify_desc);
	if (rc) {
		ERROR(cdev, "can't enable %s, result %d\n",
					gser->notify->name, rc);
		return rc;
	}
	gser->notify->driver_data = gser;
#endif

	if (gser->port.in->driver_data) {
		DBG(cdev, "reset generic data ttyGS%d\n", gser->port_num);
		gport_disconnect(gser);
	} else {
		DBG(cdev, "activate generic data ttyGS%d\n", gser->port_num);
	}
	gser->port.in_desc = ep_choose(cdev->gadget,
			gser->hs.in, gser->fs.in);
	gser->port.out_desc = ep_choose(cdev->gadget,
			gser->hs.out, gser->fs.out);

	gport_connect(gser);

	gser->online = 1;
	gserial_ports[gser->port_num].enable = gser->online;
	return rc;
}
Exemplo n.º 7
0
static int set_fastboot_config(struct fastboot_dev *dev, gfp_t gfp_flags)
{
	int result = 0;
	struct usb_gadget *gadget = dev->gadget;

	dev->in = ep_choose(gadget, &hs_source_desc, &fs_source_desc);
	dev->in_ep->driver_data = dev;

	dev->out = ep_choose(gadget, &hs_sink_desc, &fs_sink_desc);
	dev->out_ep->driver_data = dev;

	result = usb_ep_enable(dev->in_ep, dev->in);
	if (result != 0) {
		debug("enable %s --> %d\n", dev->in_ep->name, result);
		goto done;
	}

	result = usb_ep_enable(dev->out_ep, dev->out);
	if (result != 0) {
		debug("enable %s --> %d\n", dev->out_ep->name, result);
		goto done;
	}

done:
	if (result == 0)
		result = alloc_requests(dev, 1, gfp_flags);

	/* on error, disable any endpoints  */
	if (result < 0) {
		(void)usb_ep_disable(dev->in_ep);
		(void)usb_ep_disable(dev->out_ep);
		dev->in = NULL;
		dev->out = NULL;
	}

	/* caller is responsible for cleanup on error */
	return result;
}
Exemplo n.º 8
0
int f_cloner_set_alt(struct usb_function *f,
		unsigned interface, unsigned alt)
{
	struct cloner *cloner = func_to_cloner(f);
	const struct usb_endpoint_descriptor *epin_desc,*epout_desc;
	int status = 0;

	debug_cond(BURNNER_DEBUG,"set interface %d alt %d\n",interface,alt);
	epin_desc = ep_choose(cloner->gadget,&hs_bulk_in_desc,&fs_bulk_in_desc);
	epout_desc = ep_choose(cloner->gadget,&hs_bulk_out_desc,&fs_bulk_out_desc);

	status += usb_ep_enable(cloner->ep_in,epin_desc);
	status += usb_ep_enable(cloner->ep_out,epout_desc);

	if (status < 0) {
		printf("usb enable ep failed\n");
		goto failed;
	}

	cloner->ep_in->driver_data = cloner;
	cloner->ep_out->driver_data = cloner;
failed:
	return status;
}
Exemplo n.º 9
0
static int ecm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
	struct f_ecm		*ecm = func_to_ecm(f);
	struct usb_composite_dev *cdev = f->config->cdev;

	/* Control interface has only altsetting 0 */
	if (intf == ecm->ctrl_id) {
		if (alt != 0)
			goto fail;

		if (ecm->notify->driver_data) {
			VDBG(cdev, "reset ecm control %d\n", intf);
			usb_ep_disable(ecm->notify);
		} else {
			VDBG(cdev, "init ecm ctrl %d\n", intf);
			ecm->notify_desc = ep_choose(cdev->gadget,
					ecm->hs.notify,
					ecm->fs.notify);
		}
		usb_ep_enable(ecm->notify, ecm->notify_desc);
		ecm->notify->driver_data = ecm;

	/* Data interface has two altsettings, 0 and 1 */
	} else if (intf == ecm->data_id) {
		if (alt > 1)
			goto fail;

		if (ecm->port.in_ep->driver_data) {
			DBG(cdev, "reset ecm\n");
			gether_disconnect(&ecm->port);
		}

		if (!ecm->port.in) {
			DBG(cdev, "init ecm\n");
			ecm->port.in = ep_choose(cdev->gadget,
					ecm->hs.in, ecm->fs.in);
			ecm->port.out = ep_choose(cdev->gadget,
					ecm->hs.out, ecm->fs.out);
		}

		/* CDC Ethernet only sends data in non-default altsettings.
		 * Changing altsettings resets filters, statistics, etc.
		 */
		if (alt == 1) {
			struct net_device	*net;

#ifdef CONFIG_LGE_USB_GADGET_DRIVER
			ecm->port.is_zlp_ok = !(
					gadget_is_musbhdrc(cdev->gadget)
					|| gadget_is_fsl_usb2(cdev->gadget)
					);
#else
			/* Enable zlps by default for ECM conformance;
			 * override for musb_hdrc (avoids txdma ovhead).
			 */
			ecm->port.is_zlp_ok = !(gadget_is_musbhdrc(cdev->gadget));
#endif
			ecm->port.cdc_filter = DEFAULT_FILTER;
			DBG(cdev, "activate ecm\n");
			net = gether_connect(&ecm->port);
			if (IS_ERR(net))
				return PTR_ERR(net);
		}

		/* NOTE this can be a minor disagreement with the ECM spec,
		 * which says speed notifications will "always" follow
		 * connection notifications.  But we allow one connect to
		 * follow another (if the first is in flight), and instead
		 * just guarantee that a speed notification is always sent.
		 */
		ecm_notify(ecm);
	} else
		goto fail;

	return 0;
fail:
	return -EINVAL;
}