int etna_flush(struct etna_ctx *ctx, uint32_t *fence_out)
{
int status = ETNA_OK;
if(ctx == NULL)
return ETNA_INVALID_ADDR;
if(ctx->cur_buf == ETNA_CTX_BUFFER)
/* Can never flush while building context buffer */
return ETNA_INTERNAL_ERROR;
if(fence_out) /* is a fence handle requested? */
{
uint32_t fence;
int signal;
/* Need to lock the fence mutex to make sure submits are ordered by
* fence number.
*/
pthread_mutex_lock(&ctx->conn->fence_mutex);
do {
/* Get next fence ID */
if((status = _viv_fence_new(ctx->conn, &fence, &signal)) != VIV_STATUS_OK)
{
fprintf(stderr, "%s: could not request fence\n", __func__);
goto unlock_and_return_status;
}
} while(fence == 0); /* don't return fence handle 0 as it is interpreted as error value downstream */
/* Queue the signal. This can call in turn call this function (but
* without fence) if the queue was full, so we should be able to handle
* that. In that case, we will exit from this function with only
* this fence in the queue and an empty command buffer.
*/
if((status = etna_queue_signal(ctx->queue, signal, VIV_WHERE_PIXEL)) != ETNA_OK)
{
fprintf(stderr, "%s: error %i queueing fence signal %i\n", __func__, status, signal);
goto unlock_and_return_status;
}
*fence_out = fence;
}
/***** Start fence mutex locked */
/* Make sure to unlock the mutex before returning */
struct _gcsQUEUE *queue_first = _etna_queue_first(ctx->queue);
gcoCMDBUF cur_buf = (ctx->cur_buf != ETNA_NO_BUFFER) ? ctx->cmdbuf[ctx->cur_buf] : NULL;
if(cur_buf == NULL || (ctx->offset*4 <= (cur_buf->startOffset + BEGIN_COMMIT_CLEARANCE)))
{
/* Nothing in command buffer; but if we end up here there may be kernel commands to submit. Do this seperately. */
if(queue_first != NULL)
{
ctx->flushes = 0;
if((status = viv_event_commit(ctx->conn, queue_first)) != 0)
{
#ifdef DEBUG
fprintf(stderr, "Error committing kernel commands\n");
#endif
goto unlock_and_return_status;
}
if(fence_out) /* mark fence as submitted to kernel */
_viv_fence_mark_pending(ctx->conn, *fence_out);
}
goto unlock_and_return_status;
}
cur_buf->offset = ctx->offset*4; /* Copy over current end offset into CMDBUF, for kernel */
#ifdef DEBUG
fprintf(stderr, "Committing command buffer %i startOffset=%x offset=%x\n", ctx->cur_buf,
cur_buf->startOffset, ctx->offset*4);
#endif
#ifdef DEBUG_CMDBUF
etna_dump_cmd_buffer(ctx);
#endif
#ifdef GCABI_HAS_CONTEXT
gpu_context_finish_up(ctx);
#endif
if(!queue_first)
ctx->flushes += 1;
else
ctx->flushes = 0;
if((status = viv_commit(ctx->conn, cur_buf, ctx->ctx, queue_first)) != 0)
{
#ifdef DEBUG
fprintf(stderr, "Error committing command buffer\n");
#endif
goto unlock_and_return_status;
}
if(fence_out)
{
_viv_fence_mark_pending(ctx->conn, *fence_out);
pthread_mutex_unlock(&ctx->conn->fence_mutex);
}
/***** End fence mutex locked */
#ifdef GCABI_HAS_CONTEXT
/* set context entryPipe to currentPipe (next commit will start with current pipe) */
GCCTX(ctx)->entryPipe = GCCTX(ctx)->currentPipe;
gpu_context_clear(ctx);
if(ctx->ctx_cb)
{
enum etna_pipe initial_pipe, final_pipe;
/* Start building GPU context */
if((status = gpu_context_build_start(ctx)) != ETNA_OK)
{
fprintf(stderr, "%s: gpu_context_build_start failed with status %i\n", __func__, status);
return status;
}
if((status = ctx->ctx_cb(ctx->ctx_cb_data, ctx, &initial_pipe, &final_pipe)) != ETNA_OK)
{
fprintf(stderr, "%s: Context callback failed with status %i\n", __func__, status);
return status;
}
/* Set initial pipe in context */
GCCTX(ctx)->initialPipe = initial_pipe;
/* Finish building GPU context */
if((status = gpu_context_build_end(ctx, final_pipe)) != ETNA_OK)
{
fprintf(stderr, "%s: gpu_context_build_end failed with status %i\n", __func__, status);
return status;
}
}
#endif
cur_buf->startOffset = cur_buf->offset + END_COMMIT_CLEARANCE;
cur_buf->offset = cur_buf->startOffset + BEGIN_COMMIT_CLEARANCE;
if((cur_buf->offset + END_COMMIT_CLEARANCE) >= COMMAND_BUFFER_SIZE ||
ctx->flushes > ETNA_MAX_UNSIGNALED_FLUSHES)
{
/* nothing more fits in buffer, prevent warning about buffer overflow
on next etna_reserve.
*/
cur_buf->startOffset = cur_buf->offset = COMMAND_BUFFER_SIZE - END_COMMIT_CLEARANCE;
}
/* Set writing offset for next etna_reserve. For convenience this is
stored as an index instead of a byte offset. */
ctx->offset = cur_buf->offset / 4;
#ifdef DEBUG
#ifdef GCABI_HAS_CONTEXT
fprintf(stderr, " New start offset: %x New offset: %x Contextbuffer used: %i\n", cur_buf->startOffset, cur_buf->offset, *(GCCTX(ctx)->inUse));
#else
fprintf(stderr, " New start offset: %x New offset: %x\n", cur_buf->startOffset, cur_buf->offset);
#endif
#endif
return ETNA_OK;
unlock_and_return_status: /* Unlock fence mutex (if necessary) and return status */
if(fence_out)
pthread_mutex_unlock(&ctx->conn->fence_mutex);
return status;
}
int etna_flush(struct etna_ctx *ctx)
{
int status;
if(ctx == NULL)
return ETNA_INVALID_ADDR;
if(ctx->cur_buf == ETNA_CTX_BUFFER)
/* Can never flush while building context buffer */
return ETNA_INTERNAL_ERROR;
struct _gcsQUEUE *queue_first = etna_queue_first(ctx->queue);
if(ctx->cur_buf == ETNA_NO_BUFFER)
goto nothing_to_do;
gcoCMDBUF cur_buf = ctx->cmdbuf[ctx->cur_buf];
ETNA_ALIGN(ctx); /* make sure end of submitted command buffer end is aligned */
#ifdef DEBUG
printf("Committing command buffer %i startOffset=%x offset=%x\n", ctx->cur_buf,
cur_buf->startOffset, ctx->offset*4);
#endif
if(ctx->offset*4 <= (cur_buf->startOffset + BEGIN_COMMIT_CLEARANCE))
goto nothing_to_do;
cur_buf->offset = ctx->offset*4; /* Copy over current ending offset into CMDBUF, for kernel */
#ifdef DEBUG_CMDBUF
etna_dump_cmd_buffer(ctx);
#endif
#ifdef GCABI_HAS_CONTEXT
gpu_context_finish_up(ctx);
#endif
if(!queue_first)
ctx->flushes += 1;
else
ctx->flushes = 0;
if((status = viv_commit(ctx->conn, cur_buf, ctx->ctx, queue_first)) != 0)
{
#ifdef DEBUG
fprintf(stderr, "Error committing command buffer\n");
#endif
return status;
}
if((status = etna_queue_clear(ctx->queue)) != ETNA_OK)
return status;
#ifdef GCABI_HAS_CONTEXT
/* set context entryPipe to currentPipe (next commit will start with current pipe) */
GCCTX(ctx)->entryPipe = GCCTX(ctx)->currentPipe;
gpu_context_clear(ctx);
if(ctx->ctx_cb)
{
enum etna_pipe initial_pipe, final_pipe;
/* Start building GPU context */
if((status = gpu_context_build_start(ctx)) != ETNA_OK)
{
printf("%s: gpu_context_build_start failed with status %i\n", __func__, status);
return status;
}
if((status = ctx->ctx_cb(ctx->ctx_cb_data, ctx, &initial_pipe, &final_pipe)) != ETNA_OK)
{
printf("%s: Context callback failed with status %i\n", __func__, status);
return status;
}
/* Set initial pipe in context */
GCCTX(ctx)->initialPipe = initial_pipe;
/* Finish building GPU context */
if((status = gpu_context_build_end(ctx, final_pipe)) != ETNA_OK)
{
printf("%s: gpu_context_build_end failed with status %i\n", __func__, status);
return status;
}
}
#endif
cur_buf->startOffset = cur_buf->offset + END_COMMIT_CLEARANCE;
cur_buf->offset = cur_buf->startOffset + BEGIN_COMMIT_CLEARANCE;
if((cur_buf->offset + END_COMMIT_CLEARANCE) >= COMMAND_BUFFER_SIZE ||
ctx->flushes > ETNA_MAX_UNSIGNALED_FLUSHES)
{
/* nothing more fits in buffer, prevent warning about buffer overflow
on next etna_reserve.
*/
cur_buf->startOffset = cur_buf->offset = COMMAND_BUFFER_SIZE - END_COMMIT_CLEARANCE;
}
/* Set writing offset for next etna_reserve. For convenience this is
stored as an index instead of a byte offset. */
ctx->offset = cur_buf->offset / 4;
#ifdef DEBUG
#ifdef GCABI_HAS_CONTEXT
printf(" New start offset: %x New offset: %x Contextbuffer used: %i\n", cur_buf->startOffset, cur_buf->offset, *(GCCTX(ctx)->inUse));
#else
printf(" New start offset: %x New offset: %x\n", cur_buf->startOffset, cur_buf->offset);
#endif
#endif
return ETNA_OK;
nothing_to_do:
/* Nothing in command buffer; but there may be kernel commands to submit. Do this seperately. */
if(queue_first != NULL)
{
ctx->flushes = 0;
if((status = viv_event_commit(ctx->conn, queue_first)) != 0)
{
#ifdef DEBUG
fprintf(stderr, "Error committing kernel commands\n");
#endif
return status;
}
if((status = etna_queue_clear(ctx->queue)) != ETNA_OK)
return status;
}
return ETNA_OK;
}