int main(void)
{
int fahr;
for (fahr = 0; fahr <= 300; fahr += 20)
printf("%3d %6.1f\n", fahr, fahr2celsius(fahr));
return 0;
}
int printFahrList(int start, int end, int step, int withHead) {
if (start <= end && step < 0 || start >= end && step > 0 || step == 0) {
printf("params error!\n");
return 1;
}
if (withHead) {
printf("fahr\tcelsius\n");
}
int i = start;
while (start <= end ? i <= end : i >= end) {
printf("%d\t%d\n", i, fahr2celsius(i));
i += step;
}
}
/* 当 fahr = 0, 20, ……, 300 时，分别打印华氏温度与摄氏温度对照表；
* 浮点数版本 */
main()
{
float fahr, celsius;
int lower, upper, step;
lower = 0; /* 温度表的下限 */
upper = 300; /* 温度表的上限 */
step = 20; /* 步长 */
fahr = lower;
while (fahr <= upper) {
celsius = fahr2celsius(fahr);
printf("%3.0f %6.1f\n", fahr, celsius);
fahr = fahr + step;
}
return 0;
}
void write_recorded_data_USB502(configurationBlock *cblock, usb502_data *data_502 )
{
/* Create CVS file to be read into OpenOffice. When reading file, choose file type as TEXT cvs */
char filename[80];
FILE *fp;
int i;
float t, logew, dewPoint;
struct tm ltime;
char dates[40];
printf("Enter filename: ");
scanf("%s", filename);
fp = fopen(filename, "w");
fprintf(fp, "\"Name\",\"%s\"\n", cblock->name);
fprintf(fp, "\"Serial Number\",\"%ld\"\n", cblock->serialNumber);
fprintf(fp, "\"Model\",\"USB-502\"\n");
if (cblock->inputType == 0) {
fprintf(fp, "\"Sample\",\"Date/Time\",\"Temperature (C)\",\"Humidity\",\"Dew point (C)\"\n");
} else {
fprintf(fp, "\"Sample\",\"Date/Time\",\"Temperature (F)\",\"Humidity\",\"Dew point (F)\"\n");
}
for (i = 0; i < cblock->sampleCount; i++) {
localtime_r(&data_502[i].time, <ime);
strftime(dates, 79, "%D %r", <ime);
if (cblock->inputType == 0) {
t = data_502[i].temperature;
} else {
t = fahr2celsius(data_502[i].temperature);
}
logew = (0.66077 +(7.5*t/(237.3 + t))) + (log10(data_502[i].humidity) - 2.0);
dewPoint = ((0.66077 - logew)*237.3) / (logew - 8.16077);
if (cblock->inputType == 1) dewPoint = celsius2fahr(dewPoint);
strftime(dates, 79, "%D %r", <ime);
fprintf(fp,"%5d,%s,%.2f,%.1f,%.1f\n", i+1, dates, data_502[i].temperature, data_502[i].humidity, dewPoint);
}
fclose(fp);
}
int main( void )
{
usb_dev_handle *udev = NULL;
configurationBlock cb;
time_t currentTime;
struct tm ltime;
float t, logew, dewPoint;
int i, j;
usb501_data data_501[USB500_MAX_VALUES];
usb502_data data_502[USB500_MAX_VALUES];
usb503_data data_503[USB500_MAX_VALUES];
usb504_data data_504[USB500_MAX_VALUES];
char dates[40];
char name[16];
char ans[80];
int type;
udev = usb_device_find_USB500(USB500_VID, USB500_PID);
if (udev) {
printf("Success, found a USB 500!\n");
printf("Size of configuration block: %d\n", (int) sizeof(cb));
} else {
printf("Failure, did not find a USB 500!\n");
return 0;
}
printf("\n\n");
while (1) {
printf("1. Status\n");
printf("2. Configure USB 500 device for logging\n");
printf("3. Download data\n");
printf("4. Repair SRAM\n");
printf("5. Exit\n");
printf("Please select from 1-5: \n");
scanf("%s", ans);
switch(ans[0]) {
case '1':
type = read_configuration_block_USB500(udev, &cb);
printf("\n\n");
switch(type) {
case 1: printf("Device:\t\t\t USB-501 Temperature Logger (version 1.6 and earlier)\n"); break;
case 2: printf("Device:\t\t\t USB-501 Temperature Logger (version 1.7 and later)\n"); break;
case 3: printf("Device:\t\t\t USB-502 Humidity and Temperature Logger\n"); break;
case 4: printf("Device:\t\t\t USB-503 Voltage Logger\n"); break;
case 5: printf("Device:\t\t\t USB-504 Current Logger\n"); break;
case 6: printf("Device:\t\t\t USB-503B Voltage Logger\n"); break;
case 7: printf("Device:\t\t\t USB-504B Current Logger\n"); break;
default: printf("Device:\t\t\t Unkown\n"); break;
}
printf("Device Name:\t\t %s\n", cb.name);
if (cb.flagBits & LOGGING_STATE) {
if (cb.startTimeOffset == 0) {
printf("Status:\t\t\t Logging\n");
} else {
printf("Status:\t\t\t Delayed Start\n");
printf("Delay:\t\t\t %ld\n", cb.startTimeOffset);
}
} else {
printf("Status:\t\t\t Off\n");
}
ltime.tm_sec = cb.startTimeSeconds;
ltime.tm_min = cb.startTimeMinutes;
ltime.tm_hour = cb.startTimeHours;
ltime.tm_mday = cb.startTimeDay;
ltime.tm_mon = cb.startTimeMonth - 1;
ltime.tm_year = cb.startTimeYear + 100;
strftime(dates, 79, "%m/%d/%Y", <ime);
printf("Start Date:\t\t %s\n", dates);
strftime(dates, 79, "%r", <ime);
printf("Start Time:\t\t %s\n", dates);
printf("Number of Readings:\t %-d\n", cb.sampleCount);
printf("Sample Interval:\t %d seconds\n", cb.sampleRate);
if (type < 4) { // USB-501 or USB-502
if (cb.inputType == 0) { // Celsius
printf("Scale:\t\t\t Celsius");
} else {
printf("Scale:\t\t\t Fahrenheit");
}
if (cb.type == 3) {
printf(", %%rh\n");
} else {
printf("\n");
}
} else { // USB-503 or USB-504
if (cb.inputType == 0) {
printf("Calibration:\t\t Standard Calibration.\n");
} else {
printf("Calibration:\t\t Custom Calibration.\n");
}
if (cb.flagBits2 & 0x1) {
printf("LEDs:\t\t\t Disabled to save battery power.\n");
} else {
printf("LEDs:\t\t\t Enabled.\n");
}
if (cb.flagBits2 & 0x2) {
printf("Scale:\t\t\t Negative gradient scaling.\n");
} else {
printf("Scale:\t\t\t Normal positive gradient scaling.\n");
}
}
if (cb.flagBits & HIGH_ALARM_STATE) {
printf("High Alarm:\t\t Enabled\n");
} else {
printf("High Alarm:\t\t Disabled\n");
}
if (cb.flagBits & LOW_ALARM_STATE) {
printf("Low Alarm:\t\t Enabled\n");
} else {
printf("Low Alarm:\t\t Disabled\n");
}
printf("Serial Number:\t\t %ld\n", cb.serialNumber);
strncpy(name, cb.version, 4);
printf("Firmware Version:\t %s\n", name);
if (type >= 4) {
printf("Measurement Unit:\t %s.\n", cb.displayUnitText);
printf("User Calibration Input 1: %s.\n", cb.calibrationInput1Text);
printf("User Calibration Output 1: %s.\n", cb.calibrationInput1Text);
printf("User Calibration Input 2: %s.\n", cb.calibrationOutput2Text);
printf("User Calibration Output 2: %s.\n", cb.calibrationOutput2Text);
printf("Scaling Factor:\t\t %f\n", cb.capScalingFactor);
printf("High Alarm Level Text: %s.\n", cb.highAlarmLevelText);
printf("Low Alarm Level Text: %s.\n", cb.lowAlarmLevelText);
printf("Default Range Description Text: %s.\n", cb.defaultRangeDescriptionText);
printf("Default Input Unit Text: %s.\n", cb.defaultInputUnitText);
printf("Default Display Unit: %s.\n", cb.defaultDisplayUnit);
printf("Default Calibration Input 1 Text: %s.\n", cb.defaultCalibrationInput1Text);
printf("Default Calibration Output 1 Text: %s.\n", cb.defaultCalibrationOutput1Text);
printf("Default Calibration Input 2 Text: %s.\n", cb.defaultCalibrationInput2Text);
printf("Default Calibration Output 2 Text: %s.\n", cb.defaultCalibrationOutput2Text);
printf("Default High Alarm Level Text: %s.\n", cb.defaultHighAlarmLevelText);
printf("Default Low Alarm Level Text: %s.\n", cb.defaultLowAlarmLevelText);
}
printf("\n\n");
break;
case '2':
stop_logging_USB500(udev, &cb);
/* initialize the parameter block */
// sanity check
printf("cb.type = %d\n", cb.type);
printf("serial number = %ld\n", cb.serialNumber);
cb.command = 0x0;
printf("Device name = \"%s\": ",cb.name);
tcflush(0, TCIOFLUSH);
getchar();
fgets(name, 15, stdin);
if (name[0] != '\n') {
cb.name[15] = '\0'; // null terminate
j = 0;
for (i = 0; i < strlen(cb.name); i++) {
switch (name[i]) {
case '\r':
case '\n':
case '%':
case '&':
case '*':
case ',':
case '.':
case '/':
case ':':
case '<':
case '>':
case '?':
case '\\':
case '(':
case ')':
break;
default:
cb.name[j++] = name[i];
}
}
}
if (type < 4) {
printf("0 = Celsius, 1 = Fahrenheit: ");
scanf("%hhd", &cb.inputType);
if (cb.inputType == 0) { // Celsius
cb.calibrationMValue = 0.5;
cb.calibrationCValue = -40;
} else { // Fahrenheit
cb.inputType = 1;
cb.calibrationMValue = 1.0;
cb.calibrationCValue = -40;
}
}
printf("Enter sample rate [seconds/sample]. Must be > 10: ");
scanf("%hd", &cb.sampleRate);
if (cb.sampleRate < 10) cb.sampleRate = 10;
write_configuration_block_USB500(udev, &cb);
/* uncomment to set alarms */
set_alarm(udev, &cb);
time(¤tTime);
printf("Setting Device time to: %s and start logging\n", ctime(¤tTime));
start_logging_USB500(udev, &cb);
break;
case '3':
type = read_configuration_block_USB500(udev, &cb);
switch(type) {
case 1:
case 2:
read_recorded_data_USB501(udev, &cb, data_501);
printf("\n\nModel: USB-501\n");
if (cb.inputType == 0) {
printf("Sample Date/Time Temperature (C) \n");
} else {
printf("Sample Date/Time Temperature (F) \n");
}
for (i = 0; i < cb.sampleCount; i++) {
localtime_r(&data_501[i].time, <ime);
strftime(dates, 79, "%D %r", <ime);
printf("%5d %s %.2f \n", i+1, dates, data_501[i].temperature);
}
printf("\n\n");
printf("Save to file? [y/n] ");
scanf("%s", ans);
if (ans[0] == 'y') write_recorded_data_USB501(&cb, data_501);
break;
case 3:
read_recorded_data_USB502(udev, &cb, data_502);
printf("\n\nModel: USB-502\n");
if (cb.inputType == 0) {
printf("Sample Date/Time Temperature (C) Humidity Dew point (C)\n");
} else {
printf("Sample Date/Time Temperature (F) Humidity Dew point (F)\n");
}
for (i = 0; i < cb.sampleCount; i++) {
localtime_r(&data_502[i].time, <ime);
if (cb.inputType == 0) {
t = data_502[i].temperature;
} else {
t = fahr2celsius(data_502[i].temperature);
}
logew = (0.66077 +(7.5*t/(237.3 + t))) + (log10(data_502[i].humidity) - 2.0);
dewPoint = ((0.66077 - logew)*237.3) / (logew - 8.16077);
if (cb.inputType == 1) dewPoint = celsius2fahr(dewPoint);
strftime(dates, 79, "%D %r", <ime);
printf("%5d %s %.2f %.1f %.1f\n",
i+1, dates, data_502[i].temperature, data_502[i].humidity, dewPoint);
}
printf("\n\n");
printf("Save to file? [y/n] ");
scanf("%s", ans);
if (ans[0] == 'y') write_recorded_data_USB502(&cb, data_502);
break;
case 4:
case 6:
read_recorded_data_USB503(udev, &cb, data_503);
printf("\n\nModel: USB-503\n");
printf("Sample Date/Time Voltage (V) \n");
for (i = 0; i < cb.sampleCount; i++) {
localtime_r(&data_503[i].time, <ime);
strftime(dates, 79, "%D %r", <ime);
printf("%5d %s %.2f \n", i+1, dates, data_503[i].voltage);
}
printf("\n\n");
printf("Save to file? [y/n] ");
scanf("%s", ans);
if (ans[0] == 'y') write_recorded_data_USB503(&cb, data_503);
break;
case 5:
case 7:
read_recorded_data_USB504(udev, &cb, data_504);
printf("Sample Date/Time Current (mA)\n");
for (i = 0; i < cb.sampleCount; i++) {
localtime_r(&data_504[i].time, <ime);
strftime(dates, 79, "%D %r", <ime);
printf("%5d %s %.2f \n", i+1, dates, data_504[i].current);
}
printf("\n\n");
printf("Save to file? [y/n] ");
scanf("%s", ans);
if (ans[0] == 'y') write_recorded_data_USB504(&cb, data_504);
break;
}
break;
case '4':
printf("******* WARNING*******\n");
printf("Only proceed if your device is not working.\n");
printf("Do you want to proceed? [y/n]");
scanf("%s", ans);
if (ans[0] == 'n') break;
/* get the serial number and software version */
read_configuration_block_USB500(udev, &cb);
printf(" 1. USB-501 version 1.6 and earlier.\n");
printf(" 2. USB-501 version 1.7 and later.\n");
printf(" 3. USB-502\n");
printf("Enter your Device type [1-3]: \n");
scanf("%hhd", &cb.type);
strncpy(cb.name, "EasyLog USB", 15);
// strncpy(cb.version, "v2.0", 4);
cb.inputType = 1;
cb.command = 0x0;
cb.calibrationMValue = 1.0;
cb.calibrationCValue = -40;
cb.sampleRate = 60;
cb.flagBits = 0x0;
time(¤tTime);
localtime_r(¤tTime, <ime);
cb.startTimeHours = ltime.tm_hour;
cb.startTimeMinutes = ltime.tm_min;
cb.startTimeSeconds = ltime.tm_sec;
cb.startTimeDay = ltime.tm_mday;
cb.startTimeMonth = ltime.tm_mon + 1; // months from 1-12
cb.startTimeYear = ltime.tm_year - 100; // years start from 2000 not 1900.
cb.alarm1.channel1.highAlarm = 0x0;
cb.alarm1.channel1.lowAlarm = 0x0;
write_configuration_block_USB500(udev, &cb);
break;
case '5':
printf("Remove unit from USB port.\n");
cleanup_USB500(udev);
return 0;
break;
}
}
}