int ft_board_setup(void *blob, bd_t *bd)
{
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
static struct node_info nodes[] = {
{ "ti,omap2-nand", MTD_DEV_TYPE_NAND, },
{ "ti,omap2-onenand", MTD_DEV_TYPE_ONENAND, },
};
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
#endif
return 0;
}
void ft_board_setup(void *blob, bd_t *bd)
{
u32 val[8];
int rc, i = 0;
ft_cpu_setup(blob, bd);
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
#endif
#if defined(CONFIG_VIDEO)
fdt_add_edid(blob, "fsl,mpc5121-diu", edid_buf);
#endif
/* Fixup NOR FLASH mapping */
val[i++] = 0; /* chip select number */
val[i++] = 0; /* always 0 */
val[i++] = gd->bd->bi_flashstart;
val[i++] = gd->bd->bi_flashsize;
/* Fixup MRAM mapping */
val[i++] = 2; /* chip select number */
val[i++] = 0; /* always 0 */
val[i++] = CONFIG_SYS_MRAM_BASE;
val[i++] = CONFIG_SYS_MRAM_SIZE;
rc = fdt_find_and_setprop(blob, "/localbus", "ranges",
val, i * sizeof(u32), 1);
if (rc)
printf("Unable to update localbus ranges, err=%s\n",
fdt_strerror(rc));
/* Fixup reg property in NOR Flash node */
i = 0;
val[i++] = 0; /* always 0 */
val[i++] = 0; /* start at offset 0 */
val[i++] = flash_info[0].size; /* size of Bank 0 */
/* Second Bank available? */
if (flash_info[1].size > 0) {
val[i++] = 0; /* always 0 */
val[i++] = flash_info[0].size; /* offset of Bank 1 */
val[i++] = flash_info[1].size; /* size of Bank 1 */
}
rc = fdt_find_and_setprop(blob, "/localbus/flash", "reg",
val, i * sizeof(u32), 1);
if (rc)
printf("Unable to update flash reg property, err=%s\n",
fdt_strerror(rc));
}
int ft_board_setup(void *blob, bd_t *bd)
{
#if defined(CONFIG_FDT_FIXUP_PARTITIONS)
static struct node_info nodes[] = {
{ "fsl,imx6ull-gpmi-nand", MTD_DEV_TYPE_NAND, },
{ "fsl,imx6q-gpmi-nand", MTD_DEV_TYPE_NAND, },
};
/* Update partition nodes using info from mtdparts env var */
puts(" Updating MTD partitions...\n");
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
#endif
return ft_common_board_setup(blob, bd);
}
/*
* called prior to booting kernel or by 'fdt boardsetup' command
*
*/
int ft_board_setup(void *blob, bd_t *bd)
{
struct node_info nodes[] = {
{ "physmap-flash.0", MTD_DEV_TYPE_NOR, }, /* NOR flash */
{ "mxc_nand", MTD_DEV_TYPE_NAND, }, /* NAND flash */
};
if (env_get("fdt_noauto")) {
puts(" Skiping ft_board_setup (fdt_noauto defined)\n");
return 0;
}
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
return 0;
}
int ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
phys_size_t size;
ft_cpu_setup(blob, bd);
base = env_get_bootm_low();
size = env_get_bootm_size();
fdt_fixup_memory(blob, (u64)base, (u64)size);
#ifdef CONFIG_FDT_FIXUP_PARTITIONS
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
#endif
fsl_fdt_fixup_dr_usb(blob, bd);
return 0;
}
int ft_board_setup(void *blob, bd_t *bd)
{
u32 baseboard_rev;
int nodeoffset;
uint8_t enetaddr[6];
char baseboard_name[16];
int err;
fdt_shrink_to_minimum(blob, 0); /* Make room for new properties */
/* MAC addr */
if (eth_env_get_enetaddr("ethaddr", enetaddr)) {
fdt_find_and_setprop(blob,
"/soc/aips-bus@02100000/ethernet@02188000",
"local-mac-address", enetaddr, 6, 1);
}
if (eth_env_get_enetaddr("eth1addr", enetaddr)) {
fdt_find_and_setprop(blob, "/eth@pcie", "local-mac-address",
enetaddr, 6, 1);
}
fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes));
baseboard_rev = cl_eeprom_get_board_rev(0);
err = cl_eeprom_get_product_name((uchar *)baseboard_name, 0);
if (err || baseboard_rev == 0)
return 0; /* Assume not an early revision SB-FX6m baseboard */
if (!strncmp("SB-FX6m", baseboard_name, 7) && baseboard_rev <= 120) {
nodeoffset = fdt_path_offset(blob, USDHC3_PATH);
fdt_delprop(blob, nodeoffset, "cd-gpios");
fdt_find_and_setprop(blob, USDHC3_PATH, "broken-cd",
NULL, 0, 1);
fdt_find_and_setprop(blob, USDHC3_PATH, "keep-power-in-suspend",
NULL, 0, 1);
}
return 0;
}
void ft_board_setup(void *blob, bd_t *bd)
{
const char *baseboard = getenv("baseboard");
#ifdef CONFIG_TX28_S
/* TX28-41xx (aka TX28S) has no external RTC
* and no I2C GPIO extender
*/
karo_fdt_remove_node(blob, "ds1339");
karo_fdt_remove_node(blob, "pca9554");
#endif
if (baseboard != NULL && strcmp(baseboard, "stk5-v5") == 0) {
const char *otg_mode = getenv("otg_mode");
if (otg_mode && strcmp(otg_mode, "host") == 0) {
printf("otg_mode=%s incompatible with baseboard %s\n",
otg_mode, baseboard);
setenv(otg_mode, "none");
}
karo_fdt_remove_node(blob, "stk5led");
} else {
tx28_fixup_flexcan(blob);
tx28_fixup_fec(blob);
}
if (baseboard != NULL && strcmp(baseboard, "stk5-v3") == 0) {
const char *otg_mode = getenv("otg_mode");
if (otg_mode && strcmp(otg_mode, "device") == 0)
karo_fdt_remove_node(blob, "can1");
}
fdt_fixup_mtdparts(blob, tx28_nand_nodes, ARRAY_SIZE(tx28_nand_nodes));
fdt_fixup_ethernet(blob);
karo_fdt_fixup_touchpanel(blob);
karo_fdt_fixup_usb_otg(blob, "fsl,imx28-usbphy", 0x8007c000);
}
