void VtolAttitudeControl::task_main()
{
	warnx("started");
	fflush(stdout);

	/* do subscriptions */
	_v_att_sp_sub          = orb_subscribe(ORB_ID(vehicle_attitude_setpoint));
	_mc_virtual_v_rates_sp_sub = orb_subscribe(ORB_ID(mc_virtual_rates_setpoint));
	_fw_virtual_v_rates_sp_sub = orb_subscribe(ORB_ID(fw_virtual_rates_setpoint));
	_v_att_sub             = orb_subscribe(ORB_ID(vehicle_attitude));
	_v_control_mode_sub    = orb_subscribe(ORB_ID(vehicle_control_mode));
	_params_sub            = orb_subscribe(ORB_ID(parameter_update));
	_manual_control_sp_sub = orb_subscribe(ORB_ID(manual_control_setpoint));
	_armed_sub             = orb_subscribe(ORB_ID(actuator_armed));
	_local_pos_sub         = orb_subscribe(ORB_ID(vehicle_local_position));
	_airspeed_sub          = orb_subscribe(ORB_ID(airspeed));
	_battery_status_sub	   = orb_subscribe(ORB_ID(battery_status));

	_actuator_inputs_mc    = orb_subscribe(ORB_ID(actuator_controls_virtual_mc));
	_actuator_inputs_fw    = orb_subscribe(ORB_ID(actuator_controls_virtual_fw));

	parameters_update();  // initialize parameter cache

	/* update vtol vehicle status*/
	_vtol_vehicle_status.fw_permanent_stab = _params.vtol_fw_permanent_stab == 1 ? true : false;

	// make sure we start with idle in mc mode
	_vtol_type->set_idle_mc();

	/* wakeup source*/
	struct pollfd fds[3];	/*input_mc, input_fw, parameters*/

	fds[0].fd     = _actuator_inputs_mc;
	fds[0].events = POLLIN;
	fds[1].fd     = _actuator_inputs_fw;
	fds[1].events = POLLIN;
	fds[2].fd     = _params_sub;
	fds[2].events = POLLIN;

	while (!_task_should_exit) {
		/*Advertise/Publish vtol vehicle status*/
		if (_vtol_vehicle_status_pub != nullptr) {
			orb_publish(ORB_ID(vtol_vehicle_status), _vtol_vehicle_status_pub, &_vtol_vehicle_status);

		} else {
			_vtol_vehicle_status.timestamp = hrt_absolute_time();
			_vtol_vehicle_status_pub = orb_advertise(ORB_ID(vtol_vehicle_status), &_vtol_vehicle_status);
		}

		/* wait for up to 100ms for data */
		int pret = poll(&fds[0], (sizeof(fds) / sizeof(fds[0])), 100);


		/* timed out - periodic check for _task_should_exit */
		if (pret == 0) {
			continue;
		}

		/* this is undesirable but not much we can do - might want to flag unhappy status */
		if (pret < 0) {
			warn("poll error %d, %d", pret, errno);
			/* sleep a bit before next try */
			usleep(100000);
			continue;
		}

		if (fds[2].revents & POLLIN) {	//parameters were updated, read them now
			/* read from param to clear updated flag */
			struct parameter_update_s update;
			orb_copy(ORB_ID(parameter_update), _params_sub, &update);

			/* update parameters from storage */
			parameters_update();
		}

		_vtol_vehicle_status.fw_permanent_stab = _params.vtol_fw_permanent_stab == 1 ? true : false;

		vehicle_control_mode_poll();	//Check for changes in vehicle control mode.
		vehicle_manual_poll();			//Check for changes in manual inputs.
		arming_status_poll();			//Check for arming status updates.
		actuator_controls_mc_poll();	//Check for changes in mc_attitude_control output
		actuator_controls_fw_poll();	//Check for changes in fw_attitude_control output
		vehicle_rates_sp_mc_poll();
		vehicle_rates_sp_fw_poll();
		parameters_update_poll();
		vehicle_local_pos_poll();			// Check for new sensor values
		vehicle_airspeed_poll();
		vehicle_battery_poll();

		// update the vtol state machine which decides which mode we are in
		_vtol_type->update_vtol_state();

		// check in which mode we are in and call mode specific functions
		if (_vtol_type->get_mode() == ROTARY_WING) {
			// vehicle is in rotary wing mode
			_vtol_vehicle_status.vtol_in_rw_mode = true;

			_vtol_type->update_mc_state();

			// got data from mc attitude controller
			if (fds[0].revents & POLLIN) {
				orb_copy(ORB_ID(actuator_controls_virtual_mc), _actuator_inputs_mc, &_actuators_mc_in);

				_vtol_type->process_mc_data();

				fill_mc_att_rates_sp();
			}
		} else if (_vtol_type->get_mode() == FIXED_WING) {
			// vehicle is in fw mode
			_vtol_vehicle_status.vtol_in_rw_mode = false;

			_vtol_type->update_fw_state();

			// got data from fw attitude controller
			if (fds[1].revents & POLLIN) {
				orb_copy(ORB_ID(actuator_controls_virtual_fw), _actuator_inputs_fw, &_actuators_fw_in);
				vehicle_manual_poll();

				_vtol_type->process_fw_data();

				fill_fw_att_rates_sp();
			}
		} else if (_vtol_type->get_mode() == TRANSITION) {
			// vehicle is doing a transition
			bool got_new_data = false;
			if (fds[0].revents & POLLIN) {
				orb_copy(ORB_ID(actuator_controls_virtual_mc), _actuator_inputs_mc, &_actuators_mc_in);
				got_new_data = true;
			}

			if (fds[1].revents & POLLIN) {
				orb_copy(ORB_ID(actuator_controls_virtual_fw), _actuator_inputs_fw, &_actuators_fw_in);
				got_new_data = true;
			}

			// update transition state if got any new data
			if (got_new_data) {
				_vtol_type->update_transition_state();
			}

		} else if (_vtol_type->get_mode() == EXTERNAL) {
			// we are using external module to generate attitude/thrust setpoint
			_vtol_type->update_external_state();
		}


		/* Only publish if the proper mode(s) are enabled */
		if(_v_control_mode.flag_control_attitude_enabled ||
		   _v_control_mode.flag_control_rates_enabled ||
		   _v_control_mode.flag_control_manual_enabled)
		{
			if (_actuators_0_pub != nullptr) {
				orb_publish(ORB_ID(actuator_controls_0), _actuators_0_pub, &_actuators_out_0);
			} else {
				_actuators_0_pub = orb_advertise(ORB_ID(actuator_controls_0), &_actuators_out_0);
			}

			if (_actuators_1_pub != nullptr) {
				orb_publish(ORB_ID(actuator_controls_1), _actuators_1_pub, &_actuators_out_1);
			} else {
				_actuators_1_pub = orb_advertise(ORB_ID(actuator_controls_1), &_actuators_out_1);
			}
		}

		// publish the attitude rates setpoint
		if(_v_rates_sp_pub != nullptr) {
			orb_publish(ORB_ID(vehicle_rates_setpoint),_v_rates_sp_pub,&_v_rates_sp);
		}
		else {
			_v_rates_sp_pub = orb_advertise(ORB_ID(vehicle_rates_setpoint),&_v_rates_sp);
		}
	}

	warnx("exit");
	_control_task = -1;
	_exit(0);
}
Exemplo n.º 2
0
void VtolAttitudeControl::task_main()
{
	warnx("started");
	fflush(stdout);

	/* do subscriptions */
	_v_att_sp_sub          = orb_subscribe(ORB_ID(vehicle_attitude_setpoint));
	_mc_virtual_v_rates_sp_sub = orb_subscribe(ORB_ID(mc_virtual_rates_setpoint));
	_fw_virtual_v_rates_sp_sub = orb_subscribe(ORB_ID(fw_virtual_rates_setpoint));
	_v_att_sub             = orb_subscribe(ORB_ID(vehicle_attitude));
	_v_control_mode_sub    = orb_subscribe(ORB_ID(vehicle_control_mode));
	_params_sub            = orb_subscribe(ORB_ID(parameter_update));
	_manual_control_sp_sub = orb_subscribe(ORB_ID(manual_control_setpoint));
	_armed_sub             = orb_subscribe(ORB_ID(actuator_armed));
	_local_pos_sub         = orb_subscribe(ORB_ID(vehicle_local_position));
	_airspeed_sub          = orb_subscribe(ORB_ID(airspeed));
	_battery_status_sub	   = orb_subscribe(ORB_ID(battery_status));

	_actuator_inputs_mc    = orb_subscribe(ORB_ID(actuator_controls_virtual_mc));
	_actuator_inputs_fw    = orb_subscribe(ORB_ID(actuator_controls_virtual_fw));

	parameters_update();  // initialize parameter cache

	/* update vtol vehicle status*/
	_vtol_vehicle_status.fw_permanent_stab = _params.vtol_fw_permanent_stab == 1 ? true : false;

	// make sure we start with idle in mc mode
	set_idle_mc();
	flag_idle_mc = true;

	/* wakeup source*/
	struct pollfd fds[3];	/*input_mc, input_fw, parameters*/

	fds[0].fd     = _actuator_inputs_mc;
	fds[0].events = POLLIN;
	fds[1].fd     = _actuator_inputs_fw;
	fds[1].events = POLLIN;
	fds[2].fd     = _params_sub;
	fds[2].events = POLLIN;

	while (!_task_should_exit) {
		/*Advertise/Publish vtol vehicle status*/
		if (_vtol_vehicle_status_pub > 0) {
			orb_publish(ORB_ID(vtol_vehicle_status), _vtol_vehicle_status_pub, &_vtol_vehicle_status);

		} else {
			_vtol_vehicle_status.timestamp = hrt_absolute_time();
			_vtol_vehicle_status_pub = orb_advertise(ORB_ID(vtol_vehicle_status), &_vtol_vehicle_status);
		}

		/* wait for up to 100ms for data */
		int pret = poll(&fds[0], (sizeof(fds) / sizeof(fds[0])), 100);


		/* timed out - periodic check for _task_should_exit */
		if (pret == 0) {
			continue;
		}

		/* this is undesirable but not much we can do - might want to flag unhappy status */
		if (pret < 0) {
			warn("poll error %d, %d", pret, errno);
			/* sleep a bit before next try */
			usleep(100000);
			continue;
		}

		if (fds[2].revents & POLLIN) {	//parameters were updated, read them now
			/* read from param to clear updated flag */
			struct parameter_update_s update;
			orb_copy(ORB_ID(parameter_update), _params_sub, &update);

			/* update parameters from storage */
			parameters_update();
		}

		_vtol_vehicle_status.fw_permanent_stab = _params.vtol_fw_permanent_stab == 1 ? true : false;

		vehicle_control_mode_poll();	//Check for changes in vehicle control mode.
		vehicle_manual_poll();			//Check for changes in manual inputs.
		arming_status_poll();			//Check for arming status updates.
		actuator_controls_mc_poll();	//Check for changes in mc_attitude_control output
		actuator_controls_fw_poll();	//Check for changes in fw_attitude_control output
		vehicle_rates_sp_mc_poll();
		vehicle_rates_sp_fw_poll();
		parameters_update_poll();
		vehicle_local_pos_poll();			// Check for new sensor values
		vehicle_airspeed_poll();
		vehicle_battery_poll();


		if (_manual_control_sp.aux1 <= 0.0f) {		/* vehicle is in mc mode */
			_vtol_vehicle_status.vtol_in_rw_mode = true;

			if (!flag_idle_mc) {	/* we want to adjust idle speed for mc mode */
				set_idle_mc();
				flag_idle_mc = true;
			}

			/* got data from mc_att_controller */
			if (fds[0].revents & POLLIN) {
				vehicle_manual_poll();	/* update remote input */
				orb_copy(ORB_ID(actuator_controls_virtual_mc), _actuator_inputs_mc, &_actuators_mc_in);

				// scale pitch control with total airspeed
				scale_mc_output();

				fill_mc_att_control_output();
				fill_mc_att_rates_sp();

				if (_actuators_0_pub > 0) {
					orb_publish(ORB_ID(actuator_controls_0), _actuators_0_pub, &_actuators_out_0);

				} else {
					_actuators_0_pub = orb_advertise(ORB_ID(actuator_controls_0), &_actuators_out_0);
				}

				if (_actuators_1_pub > 0) {
					orb_publish(ORB_ID(actuator_controls_1), _actuators_1_pub, &_actuators_out_1);

				} else {
					_actuators_1_pub = orb_advertise(ORB_ID(actuator_controls_1), &_actuators_out_1);
				}
			}
		}

		if (_manual_control_sp.aux1 >= 0.0f) {			/* vehicle is in fw mode */
			_vtol_vehicle_status.vtol_in_rw_mode = false;

			if (flag_idle_mc) {	/* we want to adjust idle speed for fixed wing mode */
				set_idle_fw();
				flag_idle_mc = false;
			}

			if (fds[1].revents & POLLIN) {		/* got data from fw_att_controller */
				orb_copy(ORB_ID(actuator_controls_virtual_fw), _actuator_inputs_fw, &_actuators_fw_in);
				vehicle_manual_poll();	//update remote input

				fill_fw_att_control_output();
				fill_fw_att_rates_sp();

				if (_actuators_0_pub > 0) {
					orb_publish(ORB_ID(actuator_controls_0), _actuators_0_pub, &_actuators_out_0);

				} else {
					_actuators_0_pub = orb_advertise(ORB_ID(actuator_controls_0), &_actuators_out_0);
				}

				if (_actuators_1_pub > 0) {
					orb_publish(ORB_ID(actuator_controls_1), _actuators_1_pub, &_actuators_out_1);

				} else {
					_actuators_1_pub = orb_advertise(ORB_ID(actuator_controls_1), &_actuators_out_1);
				}
			}
		}

		// publish the attitude rates setpoint
		if(_v_rates_sp_pub > 0) {
			orb_publish(ORB_ID(vehicle_rates_setpoint),_v_rates_sp_pub,&_v_rates_sp);
		}
		else {
			_v_rates_sp_pub = orb_advertise(ORB_ID(vehicle_rates_setpoint),&_v_rates_sp);
		}
	}

	warnx("exit");
	_control_task = -1;
	_exit(0);
}