bool HashAggregator::Finalize() {
for (auto entry : aggregates_map) {
// Construct a container for the first tuple
ContainerTuple<std::vector<type::Value>> first_tuple(
&entry.second->first_tuple_values);
if (Helper(node, entry.second->aggregates, output_table, &first_tuple,
this->executor_context) == false) {
return false;
}
}
return true;
}
/*
gpib_config() is scheduled to run after a CARD_INSERTION event
is received, to configure the PCMCIA socket, and to make the
ethernet device available to the system.
*/
static void ines_gpib_config( struct pcmcia_device *link )
{
tuple_t tuple;
cisparse_t parse;
local_info_t *dev;
int i;
u_char buf[64];
win_req_t req;
memreq_t mem;
void *virt;
dev = link->priv;
DEBUG(0, "ines_gpib_config(0x%p)\n", link);
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
do {
tuple.DesiredTuple = CISTPL_CONFIG;
i = pcmcia_get_first_tuple(link, &tuple);
if (i != 0) break;
tuple.TupleData = buf;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
i = pcmcia_get_tuple_data(link, &tuple);
if (i != 0) break;
i = PCMCIA_PARSE_TUPLE(&tuple, &parse);
if (i != 0) break;
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
} while (0);
if (i != 0) {
cs_error(link, ParseTuple, i);
return;
}
/* Configure card */
do {
/*
* try to get manufacturer and card ID
*/
tuple.DesiredTuple = CISTPL_MANFID;
tuple.Attributes = TUPLE_RETURN_COMMON;
if( first_tuple(link,&tuple,&parse) == 0 ) {
dev->manfid = parse.manfid.manf;
dev->cardid = parse.manfid.card;
printk(KERN_DEBUG "ines_cs: manufacturer: 0x%x card: 0x%x\n",
dev->manfid, dev->cardid);
}
/* try to get board information from CIS */
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
if( first_tuple(link,&tuple,&parse) == 0 ) {
while(1) {
if( parse.cftable_entry.io.nwin > 0) {
link->io.BasePort1 = parse.cftable_entry.io.win[0].base;
link->io.NumPorts1 = 32;
link->io.BasePort2 = 0;
link->io.NumPorts2 = 0;
i = pcmcia_request_io(link, &link->io);
if (i == 0) {
printk( KERN_DEBUG "ines_cs: base=0x%x len=%d registered\n",
link->io.BasePort1, link->io.NumPorts1 );
link->conf.ConfigIndex = parse.cftable_entry.index;
break;
}
}
if ( next_tuple(link,&tuple,&parse) != 0 ) break;
}
if (i != 0) {
cs_error(link, RequestIO, i);
}
} else {
printk("ines_cs: can't get card information\n");
}
link->conf.Status = CCSR_IOIS8;
/* for the ines card we have to setup the configuration registers in
attribute memory here
*/
req.Attributes=WIN_MEMORY_TYPE_AM | WIN_DATA_WIDTH_8 | WIN_ENABLE;
req.Base=0;
req.Size=0x1000;
req.AccessSpeed=250;
i= pcmcia_request_window(&link, &req, &link->win);
if (i != 0) {
cs_error(link, RequestWindow, i);
break;
}
mem.CardOffset=0;
mem.Page=0;
i= pcmcia_map_mem_page(link->win, &mem);
if (i != 0) {
cs_error(link, MapMemPage, i);
break;
}
virt = ioremap( req.Base, req.Size );
writeb( ( link->io.BasePort1 >> 2 ) & 0xff, virt + 0xf0 ); // IOWindow base
iounmap( ( void* ) virt );
} while (0);
/*
Now allocate an interrupt line.
*/
if (link->conf.Attributes & CONF_ENABLE_IRQ)
{
i = pcmcia_request_irq(link, &link->irq);
if (i != 0) {
cs_error(link, RequestIRQ, i);
}
printk(KERN_DEBUG "ines_cs: IRQ_Line=%d\n",link->irq.AssignedIRQ);
}
/*
This actually configures the PCMCIA socket -- setting up
the I/O windows and the interrupt mapping.
*/
i = pcmcia_request_configuration(link, &link->conf);
if (i != 0) {
cs_error(link, RequestConfiguration, i);
}
/* If any step failed, release any partially configured state */
if (i != 0) {
ines_gpib_release(link);
return;
}
printk(KERN_DEBUG "ines gpib device loaded\n");
} /* gpib_config */
static void btuart_config(dev_link_t *link)
{
static ioaddr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
client_handle_t handle = link->handle;
btuart_info_t *info = link->priv;
tuple_t tuple;
u_short buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
config_info_t config;
int i, j, try, last_ret, last_fn;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
/* Get configuration register information */
tuple.DesiredTuple = CISTPL_CONFIG;
last_ret = first_tuple(handle, &tuple, &parse);
if (last_ret != CS_SUCCESS) {
last_fn = ParseTuple;
goto cs_failed;
}
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/* Configure card */
link->state |= DEV_CONFIG;
i = pcmcia_get_configuration_info(handle, &config);
link->conf.Vcc = config.Vcc;
/* First pass: look for a config entry that looks normal. */
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* Two tries: without IO aliases, then with aliases */
for (try = 0; try < 2; try++) {
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
next_entry:
i = next_tuple(handle, &tuple, &parse);
}
}
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin > 0)
&& ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
link->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
link->io.BasePort1 = base[j];
link->io.IOAddrLines = base[j] ? 16 : 3;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
}
i = next_tuple(handle, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
BT_ERR("No usable port range found");
cs_error(link->handle, RequestIO, i);
goto failed;
}
i = pcmcia_request_irq(link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
goto failed;
}
if (btuart_open(info) != 0)
goto failed;
strcpy(info->node.dev_name, info->hdev->name);
link->dev = &info->node;
link->state &= ~DEV_CONFIG_PENDING;
return;
cs_failed:
cs_error(link->handle, last_fn, last_ret);
failed:
btuart_release(link);
}
void serial_config(dev_link_t * link)
{
client_handle_t handle = link->handle;
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
tuple_t *tuple;
u_char *buf;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
int i, last_ret, last_fn;
DEBUG(0, "serial_config(0x%p)\n", link);
cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
goto failed;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
tuple->TupleData = (cisdata_t *) buf;
tuple->TupleOffset = 0;
tuple->TupleDataMax = 255;
tuple->Attributes = 0;
/* Get configuration register information */
tuple->DesiredTuple = CISTPL_CONFIG;
last_ret = first_tuple(handle, tuple, parse);
if (last_ret != CS_SUCCESS) {
last_fn = ParseTuple;
goto cs_failed;
}
link->conf.ConfigBase = parse->config.base;
link->conf.Present = parse->config.rmask[0];
/* Configure card */
link->state |= DEV_CONFIG;
/* Is this a compliant multifunction card? */
tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
info->multi = (first_tuple(handle, tuple, parse) == CS_SUCCESS);
/* Is this a multiport card? */
tuple->DesiredTuple = CISTPL_MANFID;
if (first_tuple(handle, tuple, parse) == CS_SUCCESS) {
info->manfid = parse->manfid.manf;
for (i = 0; i < MULTI_COUNT; i++)
if ((info->manfid == multi_id[i].manfid) &&
(parse->manfid.card == multi_id[i].prodid))
break;
if (i < MULTI_COUNT)
info->multi = multi_id[i].multi;
}
/* Another check for dual-serial cards: look for either serial or
multifunction cards that ask for appropriate IO port ranges */
tuple->DesiredTuple = CISTPL_FUNCID;
if ((info->multi == 0) &&
((first_tuple(handle, tuple, parse) != CS_SUCCESS) ||
(parse->funcid.func == CISTPL_FUNCID_MULTI) ||
(parse->funcid.func == CISTPL_FUNCID_SERIAL))) {
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
if (first_tuple(handle, tuple, parse) == CS_SUCCESS) {
if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
info->multi = cf->io.win[0].len >> 3;
if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
(cf->io.win[1].len == 8))
info->multi = 2;
}
}
static int multi_config(dev_link_t * link)
{
client_handle_t handle = link->handle;
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
tuple_t *tuple;
u_char *buf;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
config_info_t config;
int i, rc, base2 = 0;
cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return -1;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
i = pcmcia_get_configuration_info(handle, &config);
if (i != CS_SUCCESS) {
cs_error(handle, GetConfigurationInfo, i);
rc = -1;
goto free_cfg_mem;
}
link->conf.Vcc = config.Vcc;
tuple->TupleData = (cisdata_t *) buf;
tuple->TupleOffset = 0;
tuple->TupleDataMax = 255;
tuple->Attributes = 0;
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
i = first_tuple(handle, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
(cf->io.win[0].len > 8)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
base2 = link->io.BasePort1 + 8;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(handle, tuple, parse);
}
/* If that didn't work, look for two windows */
if (i != CS_SUCCESS) {
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
i = first_tuple(handle, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.BasePort2 = cf->io.win[1].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
base2 = link->io.BasePort2;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(handle, tuple, parse);
}
}
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
rc = -1;
goto free_cfg_mem;
}
i = pcmcia_request_irq(link->handle, &link->irq);
if (i != CS_SUCCESS) {
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
/* Socket Dual IO: this enables irq's for second port */
if (info->multi && (info->manfid == MANFID_SOCKET)) {
link->conf.Present |= PRESENT_EXT_STATUS;
link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
}
i = pcmcia_request_configuration(link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
rc = -1;
goto free_cfg_mem;
}
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
8 registers are for the UART, the others are extra registers */
if (info->manfid == MANFID_OXSEMI) {
if (cf->index == 1 || cf->index == 3) {
setup_serial(handle, info, base2, link->irq.AssignedIRQ);
outb(12, link->io.BasePort1 + 1);
} else {
setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
outb(12, base2 + 1);
}
rc = 0;
goto free_cfg_mem;
}
setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
/* The Nokia cards are not really multiport cards */
if (info->manfid == MANFID_NOKIA) {
rc = 0;
goto free_cfg_mem;
}
for (i = 0; i < info->multi - 1; i++)
setup_serial(handle, info, base2 + (8 * i),
link->irq.AssignedIRQ);
rc = 0;
free_cfg_mem:
kfree(cfg_mem);
return rc;
}
static int simple_config(dev_link_t *link)
{
static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
static int size_table[2] = { 8, 16 };
client_handle_t handle = link->handle;
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
tuple_t *tuple;
u_char *buf;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
config_info_t config;
int i, j, try;
int s;
cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return -1;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
/* If the card is already configured, look up the port and irq */
i = pcmcia_get_configuration_info(handle, &config);
if ((i == CS_SUCCESS) && (config.Attributes & CONF_VALID_CLIENT)) {
kio_addr_t port = 0;
if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
port = config.BasePort2;
info->slave = 1;
} else if ((info->manfid == MANFID_OSITECH) &&
(config.NumPorts1 == 0x40)) {
port = config.BasePort1 + 0x28;
info->slave = 1;
}
if (info->slave) {
kfree(cfg_mem);
return setup_serial(handle, info, port, config.AssignedIRQ);
}
}
link->conf.Vcc = config.Vcc;
/* First pass: look for a config entry that looks normal. */
tuple->TupleData = (cisdata_t *) buf;
tuple->TupleOffset = 0;
tuple->TupleDataMax = 255;
tuple->Attributes = 0;
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* Two tries: without IO aliases, then with aliases */
for (s = 0; s < 2; s++) {
for (try = 0; try < 2; try++) {
i = first_tuple(handle, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == size_table[s]) &&
(cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = (try == 0) ?
16 : cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
next_entry:
i = next_tuple(handle, tuple, parse);
}
}
}
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
i = first_tuple(handle, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
link->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
link->io.BasePort1 = base[j];
link->io.IOAddrLines = base[j] ? 16 : 3;
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
}
i = next_tuple(handle, tuple, parse);
}
found_port:
if (i != CS_SUCCESS) {
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link->handle, RequestIO, i);
kfree(cfg_mem);
return -1;
}
i = pcmcia_request_irq(link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
if (info->multi && (info->manfid == MANFID_3COM))
link->conf.ConfigIndex &= ~(0x08);
i = pcmcia_request_configuration(link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
kfree(cfg_mem);
return -1;
}
kfree(cfg_mem);
return setup_serial(handle, info, link->io.BasePort1, link->irq.AssignedIRQ);
}
static int simple_config(dev_link_t *link)
{
static ioaddr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
client_handle_t handle = link->handle;
serial_info_t *info = link->priv;
tuple_t tuple;
u_char buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
config_info_t config;
int i, j, try;
/* If the card is already configured, look up the port and irq */
i = CardServices(GetConfigurationInfo, handle, &config);
if ((i == CS_SUCCESS) &&
(config.Attributes & CONF_VALID_CLIENT)) {
ioaddr_t port = 0;
if ((config.BasePort2 != 0) && (config.NumPorts2 == 8)) {
port = config.BasePort2;
info->slave = 1;
} else if ((info->manfid == MANFID_OSITECH) &&
(config.NumPorts1 == 0x40)) {
port = config.BasePort1 + 0x28;
info->slave = 1;
}
if (info->slave)
return setup_serial(info, port, config.AssignedIRQ);
}
link->conf.Vcc = config.Vcc;
/* First pass: look for a config entry that looks normal. */
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* Two tries: without IO aliases, then with aliases */
for (try = 0; try < 2; try++) {
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if (i != CS_SUCCESS) goto next_entry;
if (cf->vpp1.present & (1<<CISTPL_POWER_VNOM))
link->conf.Vpp1 = link->conf.Vpp2 =
cf->vpp1.param[CISTPL_POWER_VNOM]/10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) &&
(cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = (try == 0) ?
16 : cf->io.flags & CISTPL_IO_LINES_MASK;
i = CardServices(RequestIO, link->handle, &link->io);
if (i == CS_SUCCESS) goto found_port;
}
next_entry:
i = next_tuple(handle, &tuple, &parse);
}
}
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin > 0) &&
((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
link->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
link->io.BasePort1 = base[j];
link->io.IOAddrLines = base[j] ? 16 : 3;
i = CardServices(RequestIO, link->handle,
&link->io);
if (i == CS_SUCCESS) goto found_port;
}
}
i = next_tuple(handle, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
return -1;
}
i = CardServices(RequestIRQ, link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
if (info->multi && (info->manfid == MANFID_3COM))
link->conf.ConfigIndex &= ~(0x08);
i = CardServices(RequestConfiguration, link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
return -1;
}
return setup_serial(info, link->io.BasePort1, link->irq.AssignedIRQ);
}
static int btuart_config(struct pcmcia_device *link)
{
static kio_addr_t base[5] = { 0x3f8, 0x2f8, 0x3e8, 0x2e8, 0x0 };
btuart_info_t *info = link->priv;
tuple_t tuple;
u_short buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
int i, j, try;
/* First pass: look for a config entry that looks normal. */
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* Two tries: without IO aliases, then with aliases */
for (try = 0; try < 2; try++) {
i = first_tuple(link, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if (i != CS_SUCCESS)
goto next_entry;
if (cf->vpp1.present & (1 << CISTPL_POWER_VNOM))
link->conf.Vpp = cf->vpp1.param[CISTPL_POWER_VNOM] / 10000;
if ((cf->io.nwin > 0) && (cf->io.win[0].len == 8) && (cf->io.win[0].base != 0)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = (try == 0) ? 16 : cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
next_entry:
i = next_tuple(link, &tuple, &parse);
}
}
/* Second pass: try to find an entry that isn't picky about
its base address, then try to grab any standard serial port
address, and finally try to get any free port. */
i = first_tuple(link, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin > 0)
&& ((cf->io.flags & CISTPL_IO_LINES_MASK) <= 3)) {
link->conf.ConfigIndex = cf->index;
for (j = 0; j < 5; j++) {
link->io.BasePort1 = base[j];
link->io.IOAddrLines = base[j] ? 16 : 3;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS)
goto found_port;
}
}
i = next_tuple(link, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
BT_ERR("No usable port range found");
cs_error(link, RequestIO, i);
goto failed;
}
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
goto failed;
}
if (btuart_open(info) != 0)
goto failed;
strcpy(info->node.dev_name, info->hdev->name);
link->dev_node = &info->node;
return 0;
failed:
btuart_release(link);
return -ENODEV;
}
void bluecard_config(dev_link_t *link)
{
client_handle_t handle = link->handle;
bluecard_info_t *info = link->priv;
tuple_t tuple;
u_short buf[256];
cisparse_t parse;
config_info_t config;
int i, n, last_ret, last_fn;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
/* Get configuration register information */
tuple.DesiredTuple = CISTPL_CONFIG;
last_ret = first_tuple(handle, &tuple, &parse);
if (last_ret != CS_SUCCESS) {
last_fn = ParseTuple;
goto cs_failed;
}
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/* Configure card */
link->state |= DEV_CONFIG;
i = CardServices(GetConfigurationInfo, handle, &config);
link->conf.Vcc = config.Vcc;
link->conf.ConfigIndex = 0x20;
link->io.NumPorts1 = 64;
link->io.IOAddrLines = 6;
for (n = 0; n < 0x400; n += 0x40) {
link->io.BasePort1 = n ^ 0x300;
i = CardServices(RequestIO, link->handle, &link->io);
if (i == CS_SUCCESS)
break;
}
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
goto failed;
}
i = CardServices(RequestIRQ, link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
i = CardServices(RequestConfiguration, link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
goto failed;
}
MOD_INC_USE_COUNT;
if (bluecard_open(info) != 0)
goto failed;
strcpy(info->node.dev_name, info->hdev.name);
link->dev = &info->node;
link->state &= ~DEV_CONFIG_PENDING;
return;
cs_failed:
cs_error(link->handle, last_fn, last_ret);
failed:
bluecard_release((u_long)link);
}
static int serial_config(struct pcmcia_device * link)
{
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
tuple_t *tuple;
u_char *buf;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
int i;
DEBUG(0, "serial_config(0x%p)\n", link);
cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
goto failed;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
tuple->TupleData = (cisdata_t *) buf;
tuple->TupleOffset = 0;
tuple->TupleDataMax = 255;
tuple->Attributes = 0;
/* Is this a compliant multifunction card? */
tuple->DesiredTuple = CISTPL_LONGLINK_MFC;
tuple->Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
info->multi = (first_tuple(link, tuple, parse) == CS_SUCCESS);
/* Is this a multiport card? */
tuple->DesiredTuple = CISTPL_MANFID;
info->manfid = link->manf_id;
info->prodid = link->card_id;
for (i = 0; i < ARRAY_SIZE(quirks); i++)
if ((quirks[i].manfid == ~0 ||
quirks[i].manfid == info->manfid) &&
(quirks[i].prodid == ~0 ||
quirks[i].prodid == info->prodid)) {
info->quirk = &quirks[i];
break;
}
/* Another check for dual-serial cards: look for either serial or
multifunction cards that ask for appropriate IO port ranges */
tuple->DesiredTuple = CISTPL_FUNCID;
if ((info->multi == 0) &&
(link->has_func_id) &&
((link->func_id == CISTPL_FUNCID_MULTI) ||
(link->func_id == CISTPL_FUNCID_SERIAL))) {
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
if (first_tuple(link, tuple, parse) == CS_SUCCESS) {
if ((cf->io.nwin == 1) && (cf->io.win[0].len % 8 == 0))
info->multi = cf->io.win[0].len >> 3;
if ((cf->io.nwin == 2) && (cf->io.win[0].len == 8) &&
(cf->io.win[1].len == 8))
info->multi = 2;
}
}
static int multi_config(struct pcmcia_device * link)
{
struct serial_info *info = link->priv;
struct serial_cfg_mem *cfg_mem;
tuple_t *tuple;
u_char *buf;
cisparse_t *parse;
cistpl_cftable_entry_t *cf;
int i, rc, base2 = 0;
cfg_mem = kmalloc(sizeof(struct serial_cfg_mem), GFP_KERNEL);
if (!cfg_mem)
return -1;
tuple = &cfg_mem->tuple;
parse = &cfg_mem->parse;
cf = &parse->cftable_entry;
buf = cfg_mem->buf;
tuple->TupleData = (cisdata_t *) buf;
tuple->TupleOffset = 0;
tuple->TupleDataMax = 255;
tuple->Attributes = 0;
tuple->DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
i = first_tuple(link, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
(cf->io.win[0].len > 8)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link, &link->io);
base2 = link->io.BasePort1 + 8;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(link, tuple, parse);
}
/* If that didn't work, look for two windows */
if (i != CS_SUCCESS) {
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
i = first_tuple(link, tuple, parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.BasePort2 = cf->io.win[1].base;
link->io.IOAddrLines =
cf->io.flags & CISTPL_IO_LINES_MASK;
i = pcmcia_request_io(link, &link->io);
base2 = link->io.BasePort2;
if (i == CS_SUCCESS)
break;
}
i = next_tuple(link, tuple, parse);
}
}
if (i != CS_SUCCESS) {
cs_error(link, RequestIO, i);
rc = -1;
goto free_cfg_mem;
}
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
printk(KERN_NOTICE
"serial_cs: no usable port range found, giving up\n");
cs_error(link, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
/*
* Apply any configuration quirks.
*/
if (info->quirk && info->quirk->config)
info->quirk->config(link);
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
rc = -1;
goto free_cfg_mem;
}
/* The Oxford Semiconductor OXCF950 cards are in fact single-port:
* 8 registers are for the UART, the others are extra registers.
* Siemen's MC45 PCMCIA (Possio's GCC) is OXCF950 based too.
*/
if (info->manfid == MANFID_OXSEMI || (info->manfid == MANFID_POSSIO &&
info->prodid == PRODID_POSSIO_GCC)) {
int err;
if (cf->index == 1 || cf->index == 3) {
err = setup_serial(link, info, base2,
link->irq.AssignedIRQ);
base2 = link->io.BasePort1;
} else {
err = setup_serial(link, info, link->io.BasePort1,
link->irq.AssignedIRQ);
}
info->c950ctrl = base2;
/*
* FIXME: We really should wake up the port prior to
* handing it over to the serial layer.
*/
if (info->quirk && info->quirk->wakeup)
info->quirk->wakeup(link);
rc = 0;
goto free_cfg_mem;
}
setup_serial(link, info, link->io.BasePort1, link->irq.AssignedIRQ);
for (i = 0; i < info->multi - 1; i++)
setup_serial(link, info, base2 + (8 * i),
link->irq.AssignedIRQ);
rc = 0;
free_cfg_mem:
kfree(cfg_mem);
return rc;
}
static int elsa_cs_config(struct pcmcia_device *link)
{
tuple_t tuple;
cisparse_t parse;
local_info_t *dev;
int i, j, last_fn;
u_short buf[128];
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
IsdnCard_t icard;
DEBUG(0, "elsa_config(0x%p)\n", link);
dev = link->priv;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(link, &tuple, &parse);
while (i == CS_SUCCESS) {
if ( (cf->io.nwin > 0) && cf->io.win[0].base) {
printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS) break;
} else {
printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
link->conf.ConfigIndex = cf->index;
for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) {
link->io.BasePort1 = j;
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS) break;
}
break;
}
i = next_tuple(link, &tuple, &parse);
}
if (i != CS_SUCCESS) {
last_fn = RequestIO;
goto cs_failed;
}
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
link->irq.AssignedIRQ = 0;
last_fn = RequestIRQ;
goto cs_failed;
}
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
last_fn = RequestConfiguration;
goto cs_failed;
}
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. *//* */
sprintf(dev->node.dev_name, "elsa");
dev->node.major = dev->node.minor = 0x0;
link->dev_node = &dev->node;
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: ",
dev->node.dev_name, link->conf.ConfigIndex);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
if (link->io.NumPorts2)
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
printk("\n");
icard.para[0] = link->irq.AssignedIRQ;
icard.para[1] = link->io.BasePort1;
icard.protocol = protocol;
icard.typ = ISDN_CTYPE_ELSA_PCMCIA;
i = hisax_init_pcmcia(link, &(((local_info_t*)link->priv)->busy), &icard);
if (i < 0) {
printk(KERN_ERR "elsa_cs: failed to initialize Elsa PCMCIA %d at i/o %#x\n",
i, link->io.BasePort1);
elsa_cs_release(link);
} else
((local_info_t*)link->priv)->cardnr = i;
return 0;
cs_failed:
cs_error(link, last_fn, i);
elsa_cs_release(link);
return -ENODEV;
} /* elsa_cs_config */
static void avma1cs_config(dev_link_t *link)
{
client_handle_t handle;
tuple_t tuple;
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
u8 buf[64];
char devname[128];
int busy = 0;
handle = link->handle;
dev = link->priv;
DEBUG(0, "avma1cs_config(0x%p)\n", link);
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
do {
tuple.DesiredTuple = CISTPL_CONFIG;
i = CardServices(GetFirstTuple, handle, &tuple);
if (i != CS_SUCCESS) break;
tuple.TupleData = buf;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
i = CardServices(GetTupleData, handle, &tuple);
if (i != CS_SUCCESS) break;
i = CardServices(ParseTuple, handle, &tuple, &parse);
if (i != CS_SUCCESS) break;
link->conf.ConfigBase = parse.config.base;
} while (0);
if (i != CS_SUCCESS) {
cs_error(link->handle, ParseTuple, i);
link->state &= ~DEV_CONFIG_PENDING;
return;
}
/* Configure card */
link->state |= DEV_CONFIG;
do {
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = 254;
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_VERS_1;
devname[0] = 0;
if( !first_tuple(handle, &tuple, &parse) && parse.version_1.ns > 1 ) {
strlcpy(devname,parse.version_1.str + parse.version_1.ofs[1],
sizeof(devname));
}
/*
* find IO port
*/
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(handle, &tuple, &parse);
while (i == CS_SUCCESS) {
if (cf->io.nwin > 0) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.NumPorts1 = cf->io.win[0].len;
link->io.NumPorts2 = 0;
printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1 - 1);
i = CardServices(RequestIO, link->handle, &link->io);
if (i == CS_SUCCESS) goto found_port;
}
i = next_tuple(handle, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
break;
}
/*
* allocate an interrupt line
*/
i = CardServices(RequestIRQ, link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
CardServices(ReleaseIO, link->handle, &link->io);
break;
}
/*
* configure the PCMCIA socket
*/
i = CardServices(RequestConfiguration, link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
CardServices(ReleaseIO, link->handle, &link->io);
CardServices(ReleaseIRQ, link->handle, &link->irq);
break;
}
} while (0);
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. */
strcpy(dev->node.dev_name, "A1");
dev->node.major = 45;
dev->node.minor = 0;
link->dev = &dev->node;
link->state &= ~DEV_CONFIG_PENDING;
/* If any step failed, release any partially configured state */
if (i != 0) {
avma1cs_release(link);
return;
}
printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
link->io.BasePort1, link->irq.AssignedIRQ);
if (avm_a1_init_pcmcia((void *)(int)link->io.BasePort1,
link->irq.AssignedIRQ,
&busy, isdnprot) != 0) {
printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 PCMCIA %d at i/o %#x\n", i, link->io.BasePort1);
return;
}
i = 0; /* no returncode for cardnr :-( */
dev->node.minor = i;
} /* avma1cs_config */
static int multi_config(dev_link_t *link)
{
client_handle_t handle = link->handle;
serial_info_t *info = link->priv;
tuple_t tuple;
u_char buf[256];
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
int i, base2 = 0;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
/* First, look for a generic full-sized window */
link->io.NumPorts1 = info->multi * 8;
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
/* The quad port cards have bad CIS's, so just look for a
window larger than 8 ports and assume it will be right */
if ((i == CS_SUCCESS) && (cf->io.nwin == 1) &&
(cf->io.win[0].len > 8)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
i = CardServices(RequestIO, link->handle, &link->io);
base2 = link->io.BasePort1 + 8;
if (i == CS_SUCCESS) break;
}
i = next_tuple(handle, &tuple, &parse);
}
/* If that didn't work, look for two windows */
if (i != CS_SUCCESS) {
link->io.NumPorts1 = link->io.NumPorts2 = 8;
info->multi = 2;
i = first_tuple(handle, &tuple, &parse);
while (i != CS_NO_MORE_ITEMS) {
if ((i == CS_SUCCESS) && (cf->io.nwin == 2)) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.BasePort2 = cf->io.win[1].base;
link->io.IOAddrLines = cf->io.flags & CISTPL_IO_LINES_MASK;
i = CardServices(RequestIO, link->handle, &link->io);
base2 = link->io.BasePort2;
if (i == CS_SUCCESS) break;
}
i = next_tuple(handle, &tuple, &parse);
}
}
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
return -1;
}
i = CardServices(RequestIRQ, link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
link->irq.AssignedIRQ = 0;
}
/* Socket Dual IO: this enables irq's for second port */
if (info->multi && (info->manfid == MANFID_SOCKET)) {
link->conf.Present |= PRESENT_EXT_STATUS;
link->conf.ExtStatus = ESR_REQ_ATTN_ENA;
}
i = CardServices(RequestConfiguration, link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
return -1;
}
setup_serial(info, link->io.BasePort1, link->irq.AssignedIRQ);
/* The Nokia cards are not really multiport cards */
if (info->manfid == MANFID_NOKIA)
return 0;
for (i = 0; i < info->multi-1; i++)
setup_serial(info, base2+(8*i), link->irq.AssignedIRQ);
return 0;
}
static int avma1cs_config(struct pcmcia_device *link)
{
tuple_t tuple;
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
u_char buf[64];
char devname[128];
IsdnCard_t icard;
int busy = 0;
dev = link->priv;
DEBUG(0, "avma1cs_config(0x%p)\n", link);
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
do {
tuple.DesiredTuple = CISTPL_CONFIG;
i = pcmcia_get_first_tuple(link, &tuple);
if (i != CS_SUCCESS) break;
tuple.TupleData = buf;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
i = pcmcia_get_tuple_data(link, &tuple);
if (i != CS_SUCCESS) break;
i = pcmcia_parse_tuple(link, &tuple, &parse);
if (i != CS_SUCCESS) break;
link->conf.ConfigBase = parse.config.base;
} while (0);
if (i != CS_SUCCESS) {
cs_error(link, ParseTuple, i);
return -ENODEV;
}
do {
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = 254;
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_VERS_1;
devname[0] = 0;
if( !first_tuple(link, &tuple, &parse) && parse.version_1.ns > 1 ) {
strlcpy(devname,parse.version_1.str + parse.version_1.ofs[1],
sizeof(devname));
}
/*
* find IO port
*/
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(link, &tuple, &parse);
while (i == CS_SUCCESS) {
if (cf->io.nwin > 0) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.NumPorts1 = cf->io.win[0].len;
link->io.NumPorts2 = 0;
printk(KERN_INFO "avma1_cs: testing i/o %#x-%#x\n",
link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1 - 1);
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS) goto found_port;
}
i = next_tuple(link, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
cs_error(link, RequestIO, i);
break;
}
/*
* allocate an interrupt line
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
/* undo */
pcmcia_disable_device(link);
break;
}
/*
* configure the PCMCIA socket
*/
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
pcmcia_disable_device(link);
break;
}
} while (0);
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. */
strcpy(dev->node.dev_name, "A1");
dev->node.major = 45;
dev->node.minor = 0;
link->dev_node = &dev->node;
/* If any step failed, release any partially configured state */
if (i != 0) {
avma1cs_release(link);
return -ENODEV;
}
printk(KERN_NOTICE "avma1_cs: checking at i/o %#x, irq %d\n",
link->io.BasePort1, link->irq.AssignedIRQ);
icard.para[0] = link->irq.AssignedIRQ;
icard.para[1] = link->io.BasePort1;
icard.protocol = isdnprot;
icard.typ = ISDN_CTYPE_A1_PCMCIA;
i = hisax_init_pcmcia(link, &busy, &icard);
if (i < 0) {
printk(KERN_ERR "avma1_cs: failed to initialize AVM A1 PCMCIA %d at i/o %#x\n", i, link->io.BasePort1);
avma1cs_release(link);
return -ENODEV;
}
dev->node.minor = i;
return 0;
} /* avma1cs_config */
static void elsa_cs_config(dev_link_t *link)
{
client_handle_t handle;
tuple_t tuple;
cisparse_t parse;
local_info_t *dev;
int i, j, last_fn;
u_short buf[128];
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
DEBUG(0, "elsa_config(0x%p)\n", link);
handle = link->handle;
dev = link->priv;
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
tuple.DesiredTuple = CISTPL_CONFIG;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleDataMax = 255;
tuple.TupleOffset = 0;
tuple.Attributes = 0;
i = first_tuple(handle, &tuple, &parse);
if (i != CS_SUCCESS) {
last_fn = ParseTuple;
goto cs_failed;
}
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
/* Configure card */
link->state |= DEV_CONFIG;
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(handle, &tuple, &parse);
while (i == CS_SUCCESS) {
if ( (cf->io.nwin > 0) && cf->io.win[0].base) {
printk(KERN_INFO "(elsa_cs: looks like the 96 model)\n");
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
i = CardServices(RequestIO, link->handle, &link->io);
if (i == CS_SUCCESS) break;
} else {
printk(KERN_INFO "(elsa_cs: looks like the 97 model)\n");
link->conf.ConfigIndex = cf->index;
for (i = 0, j = 0x2f0; j > 0x100; j -= 0x10) {
link->io.BasePort1 = j;
i = CardServices(RequestIO, link->handle, &link->io);
if (i == CS_SUCCESS) break;
}
break;
}
i = next_tuple(handle, &tuple, &parse);
}
if (i != CS_SUCCESS) {
last_fn = RequestIO;
goto cs_failed;
}
i = CardServices(RequestIRQ, link->handle, &link->irq);
if (i != CS_SUCCESS) {
link->irq.AssignedIRQ = 0;
last_fn = RequestIRQ;
goto cs_failed;
}
i = CardServices(RequestConfiguration, link->handle, &link->conf);
if (i != CS_SUCCESS) {
last_fn = RequestConfiguration;
goto cs_failed;
}
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. *//* */
sprintf(dev->node.dev_name, "elsa");
dev->node.major = dev->node.minor = 0x0;
link->dev = &dev->node;
/* Finally, report what we've done */
printk(KERN_INFO "%s: index 0x%02x: Vcc %d.%d",
dev->node.dev_name, link->conf.ConfigIndex,
link->conf.Vcc/10, link->conf.Vcc%10);
if (link->conf.Vpp1)
printk(", Vpp %d.%d", link->conf.Vpp1/10, link->conf.Vpp1%10);
if (link->conf.Attributes & CONF_ENABLE_IRQ)
printk(", irq %d", link->irq.AssignedIRQ);
if (link->io.NumPorts1)
printk(", io 0x%04x-0x%04x", link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
if (link->io.NumPorts2)
printk(" & 0x%04x-0x%04x", link->io.BasePort2,
link->io.BasePort2+link->io.NumPorts2-1);
printk("\n");
link->state &= ~DEV_CONFIG_PENDING;
elsa_init_pcmcia(link->io.BasePort1, link->irq.AssignedIRQ,
&(((local_info_t*)link->priv)->busy),
protocol);
return;
cs_failed:
cs_error(link->handle, last_fn, i);
elsa_cs_release((u_long)link);
} /* elsa_cs_config */
static int avmcs_config(struct pcmcia_device *link)
{
tuple_t tuple;
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
u_char buf[64];
char devname[128];
int cardtype;
int (*addcard)(unsigned int port, unsigned irq);
dev = link->priv;
do {
devname[0] = 0;
if (link->prod_id[1])
strlcpy(devname, link->prod_id[1], sizeof(devname));
/*
* find IO port
*/
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(link, &tuple, &parse);
while (i == CS_SUCCESS) {
if (cf->io.nwin > 0) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.NumPorts1 = cf->io.win[0].len;
link->io.NumPorts2 = 0;
printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n",
link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
i = pcmcia_request_io(link, &link->io);
if (i == CS_SUCCESS) goto found_port;
}
i = next_tuple(link, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
cs_error(link, RequestIO, i);
break;
}
/*
* allocate an interrupt line
*/
i = pcmcia_request_irq(link, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link, RequestIRQ, i);
/* undo */
pcmcia_disable_device(link);
break;
}
/*
* configure the PCMCIA socket
*/
i = pcmcia_request_configuration(link, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link, RequestConfiguration, i);
pcmcia_disable_device(link);
break;
}
} while (0);
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. */
if (devname[0]) {
char *s = strrchr(devname, ' ');
if (!s)
s = devname;
else s++;
strcpy(dev->node.dev_name, s);
if (strcmp("M1", s) == 0) {
cardtype = AVM_CARDTYPE_M1;
} else if (strcmp("M2", s) == 0) {
cardtype = AVM_CARDTYPE_M2;
} else {
cardtype = AVM_CARDTYPE_B1;
}
} else {
strcpy(dev->node.dev_name, "b1");
cardtype = AVM_CARDTYPE_B1;
}
dev->node.major = 64;
dev->node.minor = 0;
link->dev_node = &dev->node;
/* If any step failed, release any partially configured state */
if (i != 0) {
avmcs_release(link);
return -ENODEV;
}
switch (cardtype) {
case AVM_CARDTYPE_M1: addcard = b1pcmcia_addcard_m1; break;
case AVM_CARDTYPE_M2: addcard = b1pcmcia_addcard_m2; break;
default:
case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break;
}
if ((i = (*addcard)(link->io.BasePort1, link->irq.AssignedIRQ)) < 0) {
printk(KERN_ERR "avm_cs: failed to add AVM-%s-Controller at i/o %#x, irq %d\n",
dev->node.dev_name, link->io.BasePort1, link->irq.AssignedIRQ);
avmcs_release(link);
return -ENODEV;
}
dev->node.minor = i;
return 0;
} /* avmcs_config */
static void avmcs_config(dev_link_t *link)
{
client_handle_t handle;
tuple_t tuple;
cisparse_t parse;
cistpl_cftable_entry_t *cf = &parse.cftable_entry;
local_info_t *dev;
int i;
u_char buf[64];
char devname[128];
int cardtype;
int (*addcard)(unsigned int port, unsigned irq);
handle = link->handle;
dev = link->priv;
/*
This reads the card's CONFIG tuple to find its configuration
registers.
*/
do {
tuple.DesiredTuple = CISTPL_CONFIG;
i = pcmcia_get_first_tuple(handle, &tuple);
if (i != CS_SUCCESS) break;
tuple.TupleData = buf;
tuple.TupleDataMax = 64;
tuple.TupleOffset = 0;
i = pcmcia_get_tuple_data(handle, &tuple);
if (i != CS_SUCCESS) break;
i = pcmcia_parse_tuple(handle, &tuple, &parse);
if (i != CS_SUCCESS) break;
link->conf.ConfigBase = parse.config.base;
} while (0);
if (i != CS_SUCCESS) {
cs_error(link->handle, ParseTuple, i);
link->state &= ~DEV_CONFIG_PENDING;
return;
}
/* Configure card */
link->state |= DEV_CONFIG;
do {
tuple.Attributes = 0;
tuple.TupleData = buf;
tuple.TupleDataMax = 254;
tuple.TupleOffset = 0;
tuple.DesiredTuple = CISTPL_VERS_1;
devname[0] = 0;
if( !first_tuple(handle, &tuple, &parse) && parse.version_1.ns > 1 ) {
strlcpy(devname,parse.version_1.str + parse.version_1.ofs[1],
sizeof(devname));
}
/*
* find IO port
*/
tuple.TupleData = (cisdata_t *)buf;
tuple.TupleOffset = 0; tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
i = first_tuple(handle, &tuple, &parse);
while (i == CS_SUCCESS) {
if (cf->io.nwin > 0) {
link->conf.ConfigIndex = cf->index;
link->io.BasePort1 = cf->io.win[0].base;
link->io.NumPorts1 = cf->io.win[0].len;
link->io.NumPorts2 = 0;
printk(KERN_INFO "avm_cs: testing i/o %#x-%#x\n",
link->io.BasePort1,
link->io.BasePort1+link->io.NumPorts1-1);
i = pcmcia_request_io(link->handle, &link->io);
if (i == CS_SUCCESS) goto found_port;
}
i = next_tuple(handle, &tuple, &parse);
}
found_port:
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIO, i);
break;
}
/*
* allocate an interrupt line
*/
i = pcmcia_request_irq(link->handle, &link->irq);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestIRQ, i);
pcmcia_release_io(link->handle, &link->io);
break;
}
/*
* configure the PCMCIA socket
*/
i = pcmcia_request_configuration(link->handle, &link->conf);
if (i != CS_SUCCESS) {
cs_error(link->handle, RequestConfiguration, i);
pcmcia_release_io(link->handle, &link->io);
pcmcia_release_irq(link->handle, &link->irq);
break;
}
} while (0);
/* At this point, the dev_node_t structure(s) should be
initialized and arranged in a linked list at link->dev. */
if (devname[0]) {
char *s = strrchr(devname, ' ');
if (!s)
s = devname;
else s++;
strcpy(dev->node.dev_name, s);
if (strcmp("M1", s) == 0) {
cardtype = AVM_CARDTYPE_M1;
} else if (strcmp("M2", s) == 0) {
cardtype = AVM_CARDTYPE_M2;
} else {
cardtype = AVM_CARDTYPE_B1;
}
} else {
strcpy(dev->node.dev_name, "b1");
cardtype = AVM_CARDTYPE_B1;
}
dev->node.major = 64;
dev->node.minor = 0;
link->dev = &dev->node;
link->state &= ~DEV_CONFIG_PENDING;
/* If any step failed, release any partially configured state */
if (i != 0) {
avmcs_release(link);
return;
}
switch (cardtype) {
case AVM_CARDTYPE_M1: addcard = b1pcmcia_addcard_m1; break;
case AVM_CARDTYPE_M2: addcard = b1pcmcia_addcard_m2; break;
default:
case AVM_CARDTYPE_B1: addcard = b1pcmcia_addcard_b1; break;
}
if ((i = (*addcard)(link->io.BasePort1, link->irq.AssignedIRQ)) < 0) {
printk(KERN_ERR "avm_cs: failed to add AVM-%s-Controller at i/o %#x, irq %d\n",
dev->node.dev_name, link->io.BasePort1, link->irq.AssignedIRQ);
avmcs_release(link);
return;
}
dev->node.minor = i;
} /* avmcs_config */
static void mio_cs_config(struct pcmcia_device *link)
{
tuple_t tuple;
u_short buf[128];
cisparse_t parse;
int manfid = 0, prodid = 0;
int ret;
DPRINTK("mio_cs_config(link=%p)\n", link);
tuple.TupleData = (cisdata_t *) buf;
tuple.TupleOffset = 0;
tuple.TupleDataMax = 255;
tuple.Attributes = 0;
tuple.DesiredTuple = CISTPL_CONFIG;
ret = pcmcia_get_first_tuple(link, &tuple);
ret = pcmcia_get_tuple_data(link, &tuple);
ret = pcmcia_parse_tuple(&tuple, &parse);
link->conf.ConfigBase = parse.config.base;
link->conf.Present = parse.config.rmask[0];
#if 0
tuple.DesiredTuple = CISTPL_LONGLINK_MFC;
tuple.Attributes = TUPLE_RETURN_COMMON | TUPLE_RETURN_LINK;
info->multi(first_tuple(link, &tuple, &parse) == 0);
#endif
tuple.DesiredTuple = CISTPL_MANFID;
tuple.Attributes = TUPLE_RETURN_COMMON;
if ((pcmcia_get_first_tuple(link, &tuple) == 0) &&
(pcmcia_get_tuple_data(link, &tuple) == 0)) {
manfid = le16_to_cpu(buf[0]);
prodid = le16_to_cpu(buf[1]);
}
tuple.DesiredTuple = CISTPL_CFTABLE_ENTRY;
tuple.Attributes = 0;
ret = pcmcia_get_first_tuple(link, &tuple);
ret = pcmcia_get_tuple_data(link, &tuple);
ret = pcmcia_parse_tuple(&tuple, &parse);
#if 0
printk(" index: 0x%x\n", parse.cftable_entry.index);
printk(" flags: 0x%x\n", parse.cftable_entry.flags);
printk(" io flags: 0x%x\n", parse.cftable_entry.io.flags);
printk(" io nwin: 0x%x\n", parse.cftable_entry.io.nwin);
printk(" io base: 0x%x\n", parse.cftable_entry.io.win[0].base);
printk(" io len: 0x%x\n", parse.cftable_entry.io.win[0].len);
printk(" irq1: 0x%x\n", parse.cftable_entry.irq.IRQInfo1);
printk(" irq2: 0x%x\n", parse.cftable_entry.irq.IRQInfo2);
printk(" mem flags: 0x%x\n", parse.cftable_entry.mem.flags);
printk(" mem nwin: 0x%x\n", parse.cftable_entry.mem.nwin);
printk(" subtuples: 0x%x\n", parse.cftable_entry.subtuples);
#endif
#if 0
link->io.NumPorts1 = 0x20;
link->io.IOAddrLines = 5;
link->io.Attributes1 = IO_DATA_PATH_WIDTH_AUTO;
#endif
link->io.NumPorts1 = parse.cftable_entry.io.win[0].len;
link->io.IOAddrLines =
parse.cftable_entry.io.flags & CISTPL_IO_LINES_MASK;
link->io.NumPorts2 = 0;
{
int base;
for (base = 0x000; base < 0x400; base += 0x20) {
link->io.BasePort1 = base;
ret = pcmcia_request_io(link, &link->io);
if (!ret)
break;
}
}
link->irq.IRQInfo1 = parse.cftable_entry.irq.IRQInfo1;
link->irq.IRQInfo2 = parse.cftable_entry.irq.IRQInfo2;
ret = pcmcia_request_irq(link, &link->irq);
if (ret) {
printk("pcmcia_request_irq() returned error: %i\n", ret);
}
link->conf.ConfigIndex = 1;
ret = pcmcia_request_configuration(link, &link->conf);
link->dev_node = &dev_node;
}
