void floppy_reset(void)
{
int a;
prepare_wait_irq(FLOPPY_IRQ);
outportb((FLOPPY_FIRST + DIGITAL_OUTPUT_REGISTER), 0x00); /*disable controller*/
kwait(0, 1000 * 50);
outportb((FLOPPY_FIRST + DIGITAL_OUTPUT_REGISTER), 0x0c); /*enable controller*/
kprintf("FDD: Reseted controller\n");
wait_irq(FLOPPY_IRQ);
kprintf("FDD: Waited for it\n");
for(a = 0; a < 4; a++) {
floppy_sense_interrupt();
}
outportb(FLOPPY_FIRST + CONFIGURATION_CONTROL_REGISTER, 0);
floppy_configure();
if (floppy_drives[0].type) {
floppy_calibrate(0);
}
if (floppy_drives[1].type) {
floppy_calibrate(1);
}
kprintf("FDD: Calibrated drives\n");
}
int init_floppy()
{
int drive = floppy_get_current_drive();
uint8_t drive_type = 0;
uint8_t CCR;
/* On vérifie qu'on a bien un controleur standard, sinon on affiche un warning */
if(floppy_get_version() != 0x90)
kerr("WARNING: Floppy driver may not work with 0x%x controler.", floppy_get_version());
floppy_reset_irq();
// On fait le reset du controler + activation DMA/IRQ
outb(0x00, FLOPPY_BASE + FLOPPY_DOR);
outb(0x0C, FLOPPY_BASE + FLOPPY_DOR);
floppy_wait_irq();
floppy_sense_interrupt(NULL,NULL);
// On regle la vitesse de transfert en fonction du type de disquette
drive_type = floppy_get_type(drive);
switch(drive_type)
{
case 1: // 300 kbps (01)
case 3:
CCR = 0x01;
break;
case 2: // 500 kbps (00)
case 4:
CCR = 0x00;
break;
case 5: // 1 Mbps (11)
CCR= 0x03;
break;
default:
CCR = 0x00; // choix arbitraire btw
break;
}
outb(CCR, FLOPPY_BASE + FLOPPY_CCR);
/* Totalement hardcodé et moche à fortiori*/
floppy_write_command(SPECIFY);
floppy_write_command(0xdf); /* steprate = 3ms, unload time = 240ms */
floppy_write_command(0x02); /* load time = 16ms, no-DMA = 0 */
/* *************************************** */
// On calibre le lecteur
if(floppy_calibrate()) return -1;
return 0;
}
void io_init() {
uint8_t st, cy;
floppy_irq = false;
_out8(DIGITAL_OUTPUT_REGISTER, 0x00); // reset
_out8(DIGITAL_OUTPUT_REGISTER, 0x0c); // DMA and normal mode
wait_floppy_irq();
for(uint32_t index_1 = 0; index_1 < 4; index_1++)
floppy_check_int(&st, &cy);
_out8(CONFIGURATION_CONTROL_REGISTER, 0x00); // rotate speed 500Kbps
// configure implied seek on, FIFO on, drive polling mode off, threshold = 8, precompensation 0
floppy_specify(13, 1, 0xf, true);
floppy_calibrate(0);
return;
}
void floppy_reset()
{
outb(FP_DIGITAL_OUTPUT_REGISTER,0x00);
outb(FP_DIGITAL_OUTPUT_REGISTER,0x0C);
floppy_waitIrq();
floppy_out(FC_SENSE_INTERRUPT);
floppy_read(FP_STATUS_REGISTER_A);
floppy_read(FP_STATUS_REGISTER_A);
//geschwindigkeit auf 500 kb/s setzen
outb(FP_CONFIGURATION_CONTROL_REGISTER, 0x00);
floppy_out(FC_SPECIFY);
floppy_out(0xdf);
floppy_out(0x02);
floppy_calibrate();
kprint("\nFloppy zurueckgesetzt\n");
}
int floppy_rw_sector(uint_t drive, uint8_t sector, uint8_t head, uint8_t cylinder, uintptr_t buffer, int write)
{
int a;
alku:
if (drive >= MAX_DRIVES || !floppy_drives[drive].type) {
return -1;
}
if (inportb(FLOPPY_FIRST + DIGITAL_INPUT_REGISTER) & 0x80) {
/* disk was changed */
floppy_seek_track(drive, 1);
floppy_calibrate(drive);
floppy_motor_off(drive);
if (inportb(FLOPPY_FIRST + DIGITAL_INPUT_REGISTER) & 0x80) {
kprintf("FDD: No floppy in fd%u\n", drive);
return -2;
} else {
kprintf("FDD: Floppy changed, trying again...\n");
goto alku;
}
}
if (floppy_seek_track(drive, cylinder))
if (floppy_seek_track(drive, cylinder))
if (floppy_seek_track(drive, cylinder)) {
return -1; /* three seeks? */
}
/* floppy_seek_track actually starts motor already, but... */
floppy_motor_on(drive);
if (!(inportb(FLOPPY_FIRST + MAIN_STATUS_REGISTER) & 0x20)) {
panic("Non-dma floppy transfer?\n");
}
/* block size */
floppy_init_dma(buffer, 512, write);
kwait(0, 1000 * floppy_params.head_settle_time);
floppy_wait();
prepare_wait_irq(FLOPPY_IRQ);
floppy_command(write ? WRITE_DATA : READ_DATA);
floppy_command((head << 2) | drive);
floppy_command(cylinder);
floppy_command(head);
floppy_command(sector);
floppy_command(floppy_params.bytes_per_sector); /*sector size = 128*2^size*/
floppy_command(floppy_params.sectors_per_track); /*last sector*/
floppy_command(floppy_params.gap_length); /*27 default gap3 value*/
floppy_command(floppy_params.data_length); /*default value for data length*/
//kprintf("FDD: BPS: %u, SPT: %u, GL: %u, DL: %u\n", floppy_params.bytes_per_sector, floppy_params.sectors_per_track, floppy_params.gap_length, floppy_params.data_length);
wait_irq(FLOPPY_IRQ);
//kprintf("We got values ");
for (a = 0; a < 7; a++) { /* TODO: Put these values somewhere? */
floppy_wait_data();
inportb(FLOPPY_FIRST + DATA_FIFO);
//kprintf("%d ", inportb(FLOPPY_FIRST + DATA_FIFO));
}
//kprintf(" from floppy controller after reading\n");
floppy_prepare_motor_off(drive);
return 0;
}
