static int __devinit fsa9480_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct fsa9480_usbsw *usbsw;
int ret = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
usbsw = kzalloc(sizeof(struct fsa9480_usbsw), GFP_KERNEL);
if (!usbsw) {
dev_err(&client->dev, "failed to allocate driver data\n");
return -ENOMEM;
}
usbsw->client = client;
usbsw->pdata = client->dev.platform_data;
chip = usbsw;
i2c_set_clientdata(client, usbsw);
ret = fsa9480_irq_init(usbsw);
if (ret)
goto fail1;
ret = sysfs_create_group(&client->dev.kobj, &fsa9480_group);
if (ret) {
dev_err(&client->dev,
"failed to create fsa9480 attribute group\n");
goto fail2;
}
/* ADC Detect Time: 500ms */
fsa9480_write_reg(client, FSA9480_REG_TIMING1, 0x6);
if (chip->pdata->reset_cb)
chip->pdata->reset_cb();
/* device detection */
fsa9480_detect_dev(usbsw, INT_ATTACH);
pm_runtime_set_active(&client->dev);
return 0;
fail2:
if (client->irq)
free_irq(client->irq, usbsw);
fail1:
i2c_set_clientdata(client, NULL);
kfree(usbsw);
return ret;
}
static int __devinit fsa9480_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct fsa9480_usbsw *usbsw;
int ret = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
usbsw = kzalloc(sizeof(struct fsa9480_usbsw), GFP_KERNEL);
if (!usbsw) {
dev_err(&client->dev, "failed to allocate driver data\n");
return -ENOMEM;
}
usbsw->client = client;
usbsw->pdata = client->dev.platform_data;
if (!usbsw->pdata)
goto fail1;
i2c_set_clientdata(client, usbsw);
if (usbsw->pdata->cfg_gpio)
usbsw->pdata->cfg_gpio();
fsa9480_reg_init(usbsw);
ret = fsa9480_irq_init(usbsw);
if (ret)
goto fail1;
ret = sysfs_create_group(&client->dev.kobj, &fsa9480_group);
if (ret) {
dev_err(&client->dev,
"failed to create fsa9480 attribute group\n");
goto fail2;
}
if (usbsw->pdata->reset_cb)
usbsw->pdata->reset_cb();
/* device detection */
fsa9480_detect_dev(usbsw);
return 0;
fail2:
if (client->irq)
free_irq(client->irq, usbsw);
fail1:
i2c_set_clientdata(client, NULL);
kfree(usbsw);
return ret;
}
static int __devinit fsa9480_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct fsa9480_usbsw *usbsw;
int ret = 0;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
usbsw = kzalloc(sizeof(struct fsa9480_usbsw), GFP_KERNEL);
if (!usbsw) {
dev_err(&client->dev, "failed to allocate driver data\n");
return -ENOMEM;
}
usbsw->client = client;
usbsw->pdata = client->dev.platform_data;
if (!usbsw->pdata)
goto fail1;
i2c_set_clientdata(client, usbsw);
if (usbsw->pdata->cfg_gpio)
usbsw->pdata->cfg_gpio();
fsa9480_reg_init(usbsw);
ret = fsa9480_irq_init(usbsw);
if (ret)
goto fail1;
ret = sysfs_create_group(&client->dev.kobj, &fsa9480_group);
if (ret) {
dev_err(&client->dev,
"failed to create fsa9480 attribute group\n");
goto fail2;
}
if (usbsw->pdata->reset_cb)
usbsw->pdata->reset_cb();
/* device detection */
fsa9480_detect_dev(usbsw);
#if defined(CONFIG_SAMSUNG_CAPTIVATE) || defined(CONFIG_SAMSUNG_FASCINATE)
if (misc_register(&dockaudio_device))
printk("%s misc_register(%s) failed\n", __FUNCTION__, dockaudio_device.name);
else {
if (sysfs_create_group(&dockaudio_device.this_device->kobj, &dockaudio_group) < 0)
dev_err("failed to create sysfs group for device %s\n", dockaudio_device.name);
}
#endif
return 0;
fail2:
if (client->irq)
free_irq(client->irq, usbsw);
fail1:
i2c_set_clientdata(client, NULL);
kfree(usbsw);
return ret;
}
static void fsa9480_detect_dev(struct fsa9480_usbsw *usbsw)
{
int device_type, ret;
unsigned char val1, val2;
struct fsa9480_platform_data *pdata = usbsw->pdata;
struct i2c_client *client = usbsw->client;
#ifdef CONFIG_MACH_VICTORY
adc_fsa = i2c_smbus_read_word_data(client, FSA9480_REG_ADC);
if (adc_fsa < 0)
dev_err(&client->dev, "%s: err %d\n", __func__, adc_fsa);
if ( adc_fsa == WIMAX_CABLE_50K){
switch_set_state(&wimax_cable, USB_CABLE_50K);
} else if (adc_fsa == WIMAX_CABLE_50K_DIS) {
fsa9480_manual_switching(SWITCH_PORT_AUTO);
switch_set_state(&wimax_cable, CABLE_DISCONNECT);
}
#endif
device_type = i2c_smbus_read_word_data(client, FSA9480_REG_DEV_T1);
if (device_type < 0)
dev_err(&client->dev, "%s: err %d\n", __func__, device_type);
val1 = device_type & 0xff;
val2 = device_type >> 8;
dev_info(&client->dev, "dev1: 0x%x, dev2: 0x%x\n", val1, val2);
/* Attached */
if (val1 || val2) {
/* USB */
#ifdef CONFIG_MACH_VICTORY
if (val1 & DEV_T1_USB_MASK){
#else
if (val1 & DEV_T1_USB_MASK || val2 & DEV_T2_USB_MASK ) {
#endif
if (pdata->usb_cb)
pdata->usb_cb(FSA9480_ATTACHED);
micro_usb_status = 1;
#ifdef _SUPPORT_SAMSUNG_AUTOINSTALLER_
askon_gadget_disconnect();
if (!askon_status)
UsbIndicator(1);
#else
UsbIndicator(1);
#endif
if (usbsw->mansw) {
ret = i2c_smbus_write_byte_data(client,
FSA9480_REG_MANSW1, usbsw->mansw);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
}
#ifdef CONFIG_MACH_VICTORY
} else if ( val2 & DEV_T2_USB_MASK ) {
if (pdata->wimax_cb)
pdata->wimax_cb(FSA9480_ATTACHED);
switch_set_state(&wimax_cable, USB_CABLE_255K);
#endif
/* UART */
} else if (val1 & DEV_T1_UART_MASK || val2 & DEV_T2_UART_MASK) {
if(val2 & DEV_T2_UART_MASK)
MicroJigUARTOffStatus = 1;
if (pdata->uart_cb)
pdata->uart_cb(FSA9480_ATTACHED);
if (usbsw->mansw) {
ret = i2c_smbus_write_byte_data(client,
FSA9480_REG_MANSW1, SW_UART);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
}
if (val2 & DEV_T2_JIG_MASK) {
if (pdata->jig_cb)
pdata->jig_cb(FSA9480_ATTACHED);
}
/* CHARGER */
} else if (val1 & DEV_T1_CHARGER_MASK) {
if (pdata->charger_cb)
pdata->charger_cb(FSA9480_ATTACHED);
/* JIG */
} else if (val2 & DEV_T2_JIG_MASK) {
if (pdata->jig_cb)
pdata->jig_cb(FSA9480_ATTACHED);
/* Desk Dock */
} else if (val2 & DEV_AV) {
if (pdata->deskdock_cb)
pdata->deskdock_cb(FSA9480_ATTACHED);
dock_status = 1;
ret = i2c_smbus_write_byte_data(client,
FSA9480_REG_MANSW1, SW_VAUDIO);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
ret = i2c_smbus_read_byte_data(client,
FSA9480_REG_CTRL);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
ret = i2c_smbus_write_byte_data(client,
FSA9480_REG_CTRL, ret & ~CON_MANUAL_SW);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
/* Car Dock */
} else if (val2 & DEV_JIG_UART_ON) {
if (pdata->cardock_cb)
pdata->cardock_cb(FSA9480_ATTACHED);
dock_status = 1;
ret = i2c_smbus_write_byte_data(client,
FSA9480_REG_MANSW1, SW_VAUDIO);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
ret = i2c_smbus_read_byte_data(client,
FSA9480_REG_CTRL);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
ret = i2c_smbus_write_byte_data(client,
FSA9480_REG_CTRL, ret & ~CON_MANUAL_SW);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
}
/* Detached */
} else {
/* USB */
#ifdef CONFIG_MACH_VICTORY
if (usbsw->dev1 & DEV_T1_USB_MASK){
#else
if (usbsw->dev1 & DEV_T1_USB_MASK ||
usbsw->dev2 & DEV_T2_USB_MASK) {
#endif
micro_usb_status = 0;
UsbIndicator(0);
if (pdata->usb_cb)
pdata->usb_cb(FSA9480_DETACHED);
#ifdef CONFIG_MACH_VICTORY
/* USB JIG */
} else if (usbsw->dev2 & DEV_T2_USB_MASK) {
if (pdata->wimax_cb)
pdata->wimax_cb(FSA9480_DETACHED);
switch_set_state(&wimax_cable, CABLE_DISCONNECT);
#endif
/* UART */
} else if (usbsw->dev1 & DEV_T1_UART_MASK ||
usbsw->dev2 & DEV_T2_UART_MASK) {
if(usbsw->dev2 & DEV_T2_UART_MASK)
MicroJigUARTOffStatus = 0;
if (pdata->uart_cb)
pdata->uart_cb(FSA9480_DETACHED);
if (usbsw->dev2 & DEV_T2_JIG_MASK) {
if (pdata->jig_cb)
pdata->jig_cb(FSA9480_DETACHED);
}
/* CHARGER */
} else if (usbsw->dev1 & DEV_T1_CHARGER_MASK) {
if (pdata->charger_cb)
pdata->charger_cb(FSA9480_DETACHED);
/* JIG */
} else if (usbsw->dev2 & DEV_T2_JIG_MASK) {
if (pdata->jig_cb)
pdata->jig_cb(FSA9480_DETACHED);
/* Desk Dock */
} else if (usbsw->dev2 & DEV_AV) {
if (pdata->deskdock_cb)
pdata->deskdock_cb(FSA9480_DETACHED);
dock_status = 0;
ret = i2c_smbus_read_byte_data(client,FSA9480_REG_CTRL);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
ret = i2c_smbus_write_byte_data(client,
FSA9480_REG_CTRL, ret | CON_MANUAL_SW);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
/* Car Dock */
} else if (usbsw->dev2 & DEV_JIG_UART_ON) {
if (pdata->cardock_cb)
pdata->cardock_cb(FSA9480_DETACHED);
dock_status = 0;
ret = i2c_smbus_read_byte_data(client,
FSA9480_REG_CTRL);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
ret = i2c_smbus_write_byte_data(client,
FSA9480_REG_CTRL, ret | CON_MANUAL_SW);
if (ret < 0)
dev_err(&client->dev,
"%s: err %d\n", __func__, ret);
}
}
usbsw->dev1 = val1;
usbsw->dev2 = val2;
}
static void fsa9480_reg_init(struct fsa9480_usbsw *usbsw)
{
struct i2c_client *client = usbsw->client;
unsigned int ctrl = CON_MASK;
int ret;
#if defined (CONFIG_MACH_ATLAS) || defined (CONFIG_MACH_FORTE)
/* mask interrupts (unmask attach/detach only) */
ret = i2c_smbus_write_word_data(client, FSA9480_REG_INT1_MASK, 0x1ffc);
if (ret < 0)
dev_err(&client->dev, "%s: err %d\n", __func__, ret);
#elif CONFIG_MACH_VICTORY
/* mask interrupts (unmask attach/detach only reserved attach only) */
ret = i2c_smbus_write_word_data(client, FSA9480_REG_INT1_MASK, 0x1dfc);
if (ret < 0)
dev_err(&client->dev, "%s: err %d\n", __func__, ret);
#endif
/* mask all car kit interrupts */
ret = i2c_smbus_write_word_data(client, FSA9480_REG_CK_INTMASK1, 0x07ff);
if (ret < 0)
dev_err(&client->dev, "%s: err %d\n", __func__, ret);
/* ADC Detect Time: 500ms */
ret = i2c_smbus_write_byte_data(client, FSA9480_REG_TIMING1, 0x6);
if (ret < 0)
dev_err(&client->dev, "%s: err %d\n", __func__, ret);
usbsw->mansw = i2c_smbus_read_byte_data(client, FSA9480_REG_MANSW1);
if (usbsw->mansw < 0)
dev_err(&client->dev, "%s: err %d\n", __func__, usbsw->mansw);
if (usbsw->mansw)
ctrl &= ~CON_MANUAL_SW; /* Manual Switching Mode */
ret = i2c_smbus_write_byte_data(client, FSA9480_REG_CTRL, ctrl);
if (ret < 0)
dev_err(&client->dev, "%s: err %d\n", __func__, ret);
}
static irqreturn_t fsa9480_irq_thread(int irq, void *data)
{
struct fsa9480_usbsw *usbsw = data;
struct i2c_client *client = usbsw->client;
int intr;
/* read and clear interrupt status bits */
intr = i2c_smbus_read_word_data(client, FSA9480_REG_INT1);
if (intr < 0) {
dev_err(&client->dev, "%s: err %d\n", __func__, intr);
} else if (intr == 0) {
/* interrupt was fired, but no status bits were set,
so device was reset. In this case, the registers were
reset to defaults so they need to be reinitialised. */
fsa9480_reg_init(usbsw);
}
/* device detection */
fsa9480_detect_dev(usbsw);
return IRQ_HANDLED;
}
static int fsa9480_irq_init(struct fsa9480_usbsw *usbsw)
{
struct i2c_client *client = usbsw->client;
int ret;
if (client->irq) {
ret = request_threaded_irq(client->irq, NULL,
fsa9480_irq_thread, IRQF_TRIGGER_FALLING,
"fsa9480 micro USB", usbsw);
if (ret) {
dev_err(&client->dev, "failed to reqeust IRQ\n");
return ret;
}
ret = enable_irq_wake(client->irq);
if (ret < 0)
dev_err(&client->dev,
"failed to enable wakeup src %d\n", ret);
}
return 0;
}
static int __devinit fsa9480_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct fsa9480_usbsw *usbsw;
int ret = 0;
#ifdef CONFIG_MACH_FORTE
s3c_gpio_cfgpin(GPIO_USB_SCL_28V, S3C_GPIO_OUTPUT);
s3c_gpio_setpull(GPIO_USB_SCL_28V, S3C_GPIO_PULL_NONE);
s3c_gpio_cfgpin(GPIO_USB_SDA_28V, S3C_GPIO_OUTPUT);
s3c_gpio_setpull(GPIO_USB_SDA_28V, S3C_GPIO_PULL_NONE);
#endif
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
usbsw = kzalloc(sizeof(struct fsa9480_usbsw), GFP_KERNEL);
if (!usbsw) {
dev_err(&client->dev, "failed to allocate driver data\n");
return -ENOMEM;
}
usbsw->client = client;
usbsw->pdata = client->dev.platform_data;
if (!usbsw->pdata)
goto fail1;
i2c_set_clientdata(client, usbsw);
local_usbsw = usbsw; // temp
if (usbsw->pdata->cfg_gpio)
usbsw->pdata->cfg_gpio();
fsa9480_reg_init(usbsw);
ret = fsa9480_irq_init(usbsw);
if (ret)
goto fail1;
ret = sysfs_create_group(&client->dev.kobj, &fsa9480_group);
if (ret) {
dev_err(&client->dev,
"failed to create fsa9480 attribute group\n");
goto fail2;
}
if (usbsw->pdata->reset_cb)
usbsw->pdata->reset_cb();
indicator_dev.name = DRIVER_NAME;
#if 1
indicator_dev.print_name = print_switch_name;
indicator_dev.print_state = print_switch_state;
#endif
switch_dev_register(&indicator_dev);
#if defined(CONFIG_MACH_VICTORY)
ret = switch_dev_register(&wimax_cable);
wimax_cable.print_state = wimax_cable_type;
#endif
/* device detection */
fsa9480_detect_dev(usbsw);
// set fsa9480 init flag.
if (usbsw->pdata->set_init_flag)
usbsw->pdata->set_init_flag();
return 0;
fail2:
if (client->irq)
free_irq(client->irq, usbsw);
fail1:
i2c_set_clientdata(client, NULL);
kfree(usbsw);
return ret;
}
static int __devexit fsa9480_remove(struct i2c_client *client)
{
struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
if (client->irq) {
disable_irq_wake(client->irq);
free_irq(client->irq, usbsw);
}
i2c_set_clientdata(client, NULL);
sysfs_remove_group(&client->dev.kobj, &fsa9480_group);
kfree(usbsw);
return 0;
}
#ifdef CONFIG_PM
static int fsa9480_suspend(struct i2c_client *client, pm_message_t mesg)
{
#ifdef CONFIG_MACH_VICTORY
disable_irq(client->irq );
#endif
return 0;
}
static int fsa9480_resume(struct i2c_client *client)
{
struct fsa9480_usbsw *usbsw = i2c_get_clientdata(client);
#ifdef CONFIG_MACH_VICTORY
enable_irq(client->irq);
#endif
/* device detection */
fsa9480_detect_dev(usbsw);
return 0;
}
#else
#define fsa9480_suspend NULL
#define fsa9480_resume NULL
#endif /* CONFIG_PM */
static const struct i2c_device_id fsa9480_id[] = {
{"fsa9480", 0},
{}
};
MODULE_DEVICE_TABLE(i2c, fsa9480_id);
static struct i2c_driver fsa9480_i2c_driver = {
.driver = {
.name = "fsa9480",
},
.probe = fsa9480_probe,
.remove = __devexit_p(fsa9480_remove),
.suspend = fsa9480_suspend,
.resume = fsa9480_resume,
.id_table = fsa9480_id,
};
static int __devinit fsa9480_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
//struct regulator *regulator;
struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent);
struct fsa9480_platform_data *pdata = client->dev.platform_data;
struct fsa9480_usbsw *usbsw;
struct pm860x_vbus_info *vbus;
#if 0 // TODO:
struct pxa_vbus_info info;
#endif
unsigned int data;
int ret = 0;
u8 devID;
u8 intr, intr2, intr_chg;
u8 mansw1;
unsigned int ctrl = CTRL_MASK;
printk("[FSA9480] PROBE ......\n");
if (!i2c_check_functionality(adapter, I2C_FUNC_I2C))
return -EIO;
isProbe = 1;
//add for AT Command
//wake_lock_init(&JIGConnect_idle_wake, WAKE_LOCK_IDLE, "jig_connect_idle_wake");
wake_lock_init(&JIGConnect_suspend_wake, WAKE_LOCK_SUSPEND, "jig_connect_suspend_wake");
wake_lock_init(&mUSB_suspend_wake, WAKE_LOCK_SUSPEND, "mUSB_detect");
#ifdef CONFIG_KONA_PI_MGR
ret=pi_mgr_qos_add_request(&qos_node, "fsa9480", PI_MGR_PI_ID_ARM_SUB_SYSTEM,
PI_MGR_QOS_DEFAULT_VALUE);
if (ret)
{
pr_err("%s: failed to add fsa9480 to qos\n",__func__);
return -1;
}
#endif
usbsw = kzalloc(sizeof(struct fsa9480_usbsw), GFP_KERNEL);
if (!usbsw) {
dev_err(&client->dev, "failed to allocate driver data\n");
return -ENOMEM;
}
usbsw->client = client;
usbsw->pdata = client->dev.platform_data;
chip = usbsw;
i2c_set_clientdata(client, usbsw);
#if defined (VBUS_DETECT) /* Init vbus for pxa(MARVELL) */
// chip->pdata = pm860x_pdata->vbus;
vbus = kzalloc(sizeof(struct pm860x_vbus_info), GFP_KERNEL);
if (!vbus) {
ret = -ENOMEM;
goto out_mem;
}
dev_set_drvdata(&client->dev, vbus);
vbus->res = kzalloc(sizeof(struct resource), GFP_KERNEL);
if (!vbus->res) {
ret = -ENOMEM;
goto out_mem2;
}
vbus->res->start = pdata->vbus->reg_base;
vbus->res->end = pdata ->vbus->reg_end;
memset(&info,0,sizeof(struct pxa_vbus_info));
info.dev = &client->dev;
info.res = vbus->res;
pxa_vbus_init(&info);
data = VBUS_A_VALID | VBUS_A_SESSION_VALID | VBUS_B_SESSION_VALID | VBUS_B_SESSION_END | VBUS_ID;
pxa_unmask_vbus(data);
#endif
#if defined(CONFIG_SPA)
spa_external_event = spa_get_external_event_handler();
#elif defined(CONFIG_BATTERY_D2083)
ret = d2083_register_enable_charge(TSU8111_Charger_Enable);
if(ret < 0) {
pr_err("%s. fail to register enable charge function\n", __func__);
goto out_charger_enable;
}
ret = d2083_register_enable_back_charge(TSU8111_Charger_BackCHG_Enable);
if(ret < 0) {
pr_err("%s. fail to register enable charge function\n", __func__);
goto out_charger_enable;
}
ret = d2083_register_disable_charge(TSU8111_Charger_Disable);
if(ret < 0) {
pr_err("%s. fail to register disable charge function\n", __func__);
goto out_charger_disable;
}
spa_external_event = d2083_get_external_event_handler();
#endif
/* clear interrupt */
fsa9480_read_reg(client, FSA9480_REG_INT1, &intr);
fsa9480_read_reg(client, FSA9480_REG_DEVID, &devID);
if(devID==0x0a || devID==0x5A)
muic_type=muicTypeTI6111;
else if(devID==0x00)
muic_type=muicTypeFSA880;
else
muic_type=muicTypeFSA;
if(muic_type==muicTypeFSA880)
{
intr &= 0xffff;
/* set control register */
fsa9480_write_reg(client, FSA9480_REG_CTRL, 0x04);
}
else if(muic_type==muicTypeTI6111)
{
intr &= 0xffff;
/* clear interrupt */
fsa9480_read_reg(client, FSA9480_REG_INT2, &intr2);
fsa9480_read_reg(client, FSA9480_REG_CHG_INT, &intr_chg);
/* unmask interrupt (attach/detach only) */
ret = fsa9480_write_reg(client, FSA9480_REG_INT1_MASK, 0x00);
if (ret < 0)
return ret;
#if 0/*FSA9480's Interrupt Mask init setting*/
//ret = fsa9480_write_reg(client, FSA9480_REG_INT2_MASK, 0x00);
#endif
/*TI USB : not to get Connect Interrupt : no more double interrupt*/
ret = fsa9480_write_reg(client, FSA9480_REG_INT1_MASK, 0x40);
if (ret < 0)
return ret;
ret = fsa9480_write_reg(client, FSA9480_REG_INT2_MASK, 0x20);
if (ret < 0)
return ret;
ret = fsa9480_write_reg(client, FSA9480_REG_CHG_INT_MASK, 0xc0);
if (ret < 0)
return ret;
fsa9480_read_reg(client, FSA9480_REG_MANSW1, &mansw1);
usbsw->mansw = mansw1;
ctrl &= ~INT_MASK; /* Unmask Interrupt */
if (usbsw->mansw)
ctrl &= ~MANUAL_SWITCH; /* Manual Switching Mode */
fsa9480_write_reg(client, FSA9480_REG_CTRL, ctrl);
}
else
printk("[FSA9480] Error!!!! No Type. Check dev ID(0x01 addr) ......\n");
ret = fsa9480_irq_init(usbsw);
if (ret)
goto fsa9480_probe_fail;
ret = sysfs_create_group(&client->dev.kobj, &fsa9480_group);
if (ret) {
dev_err(&client->dev,
"[FSA9480] Creating fsa9480 attribute group failed");
goto fsa9480_probe_fail2;
}
/* device detection */
fsa9480_detect_dev(usbsw, 1);
isProbe = 0;
tsu8111_check_ovp();
/*reset UIC*/
if(muic_type==muicTypeFSA880)
fsa9480_write_reg(client, FSA9480_REG_CTRL, 0x04);
else
{
fsa9480_write_reg(client, FSA9480_REG_CTRL, 0x1E);
/*set timing1 to 100ms*/
// fsa9480_write_reg(client, FSA9480_REG_TIMING1, 0x1);
}
#ifdef CONFIG_KONA_PI_MGR
//ret=pi_mgr_qos_request_update(&qos_node, 0);
//if (ret)
//{
// pr_err("%s: failed to request update qos_node\n",__func__);
//}
#endif
printk("[FSA9480] PROBE Done.\n");
return 0;
out_mem:
return ret;
#if defined(CONFIG_BATTERY_D2083)
out_charger_enable:
out_charger_disable:
#endif /* CONFIG_BATTERY_D2083 */
out_mem2:
kfree(vbus);
fsa9480_probe_fail2:
if (client->irq)
free_irq(client->irq, NULL);
fsa9480_probe_fail:
i2c_set_clientdata(client, NULL);
kfree(usbsw);
return ret;
}
