static void acm_free_func(struct usb_function *f)
{
struct f_acm *acm = func_to_acm(f);
kobject_del(&acm->kobj);
kobject_put(&acm->kobj);
kfree(acm);
}
static void acm_free_func(struct usb_function *f)
{
struct f_acm *acm = func_to_acm(f);
D("+\n");
kfree(acm);
D("-\n");
}
static void acm_disable(struct usb_function *f)
{
struct f_acm *acm = func_to_acm(f);
struct usb_composite_dev *cdev = f->config->cdev;
DBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num);
gserial_disconnect(&acm->port);
usb_ep_disable(acm->notify);
acm->notify->driver_data = NULL;
}
static void acm_unbind(struct usb_configuration *c, struct usb_function *f)
{
struct f_acm *acm = func_to_acm(f);
D("+\n");
acm_string_defs[0].id = 0;
usb_free_all_descriptors(f);
if (acm->notify_req)
gs_acm_cdev_free_req(acm->notify, acm->notify_req);
D("-\n");
}
static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
struct f_acm *acm = func_to_acm(f);
struct usb_composite_dev *cdev = f->config->cdev;
/* we know alt == 0, so this is an activation or a reset */
if (intf == acm->ctrl_id) {
if (acm->notify->driver_data) {
VDBG(cdev, "reset acm control interface %d\n", intf);
usb_ep_disable(acm->notify);
}
if (!acm->notify->desc)
if (config_ep_by_speed(cdev->gadget, f, acm->notify))
return -EINVAL;
usb_ep_enable(acm->notify);
acm->notify->driver_data = acm;
} else if (intf == acm->data_id) {
if (acm->port.in->driver_data) {
DBG(cdev, "reset acm ttyGS%d\n", acm->port_num);
gserial_disconnect(&acm->port);
}
if (!acm->port.in->desc || !acm->port.out->desc) {
DBG(cdev, "activate acm ttyGS%d\n", acm->port_num);
if (config_ep_by_speed(cdev->gadget, f,
acm->port.in) ||
config_ep_by_speed(cdev->gadget, f,
acm->port.out)) {
acm->port.in->desc = NULL;
acm->port.out->desc = NULL;
return -EINVAL;
}
}
gserial_connect(&acm->port, acm->port_num);
} else
return -EINVAL;
return 0;
}
static void acm_disable(struct usb_function *f)
{
struct f_acm *acm = func_to_acm(f);
struct usb_composite_dev *cdev = f->config->cdev;
D("+\n");
DBG(cdev, "acm ttyGS%d deactivated\n", acm->port_num);
gacm_cdev_disconnect(&acm->port);
if (acm->notify) {
usb_ep_disable(acm->notify);
acm->notify->driver_data = NULL;
}
bsp_usb_set_enum_stat(acm->data_id, 0);
D("-\n");
}
/* ACM function driver setup/binding */
static int
acm_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_acm *acm = func_to_acm(f);
struct usb_string *us;
int status;
struct usb_ep *ep;
acm_string_defs[ACM_CTRL_IDX].s = acm->ctrl_string_buf;
acm_string_defs[ACM_DATA_IDX].s = acm->data_string_buf;
acm_string_defs[ACM_IAD_IDX].s = acm->iad_string_buf;
/* maybe allocate device-global string IDs, and patch descriptors */
us = usb_gstrings_attach(cdev, acm_strings,
ARRAY_SIZE(acm_string_defs));
if (IS_ERR(us))
return PTR_ERR(us);
acm_control_interface_desc.iInterface = us[ACM_CTRL_IDX].id;
acm_data_interface_desc.iInterface = us[ACM_DATA_IDX].id;
acm_iad_descriptor.iFunction = us[ACM_IAD_IDX].id;
acm_iad_descriptor.bFunctionProtocol = acm->iad_proto;
acm_control_interface_desc.bInterfaceProtocol = acm->ctrl_intf_proto;
/* allocate instance-specific interface IDs, and patch descriptors */
status = usb_interface_id(c, f);
if (status < 0)
goto fail;
acm->ctrl_id = status;
acm_iad_descriptor.bFirstInterface = status;
acm_control_interface_desc.bInterfaceNumber = status;
acm_union_desc .bMasterInterface0 = status;
status = usb_interface_id(c, f);
if (status < 0)
goto fail;
acm->data_id = status;
acm_data_interface_desc.bInterfaceNumber = status;
acm_union_desc.bSlaveInterface0 = status;
acm_call_mgmt_descriptor.bDataInterface = status;
status = -ENODEV;
/* allocate instance-specific endpoints */
ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_in_desc);
if (!ep)
goto fail;
acm->port.in = ep;
ep->driver_data = cdev; /* claim */
ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_out_desc);
if (!ep)
goto fail;
acm->port.out = ep;
ep->driver_data = cdev; /* claim */
ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_notify_desc);
if (!ep)
goto fail;
acm->notify = ep;
ep->driver_data = cdev; /* claim */
/* allocate notification */
acm->notify_req = gs_alloc_req(ep,
sizeof(struct usb_cdc_notification) + 2,
GFP_KERNEL);
if (!acm->notify_req)
goto fail;
acm->notify_req->complete = acm_cdc_notify_complete;
acm->notify_req->context = acm;
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
acm_hs_notify_desc.bEndpointAddress =
acm_fs_notify_desc.bEndpointAddress;
acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
status = usb_assign_descriptors(f, acm_fs_function, acm_hs_function,
acm_ss_function);
if (status)
goto fail;
DBG(cdev, "acm ttyGS%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
acm->port_num,
gadget_is_superspeed(c->cdev->gadget) ? "super" :
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
acm->port.in->name, acm->port.out->name,
acm->notify->name);
return 0;
fail:
if (acm->notify_req) {
gs_free_req(acm->notify, acm->notify_req);
acm->notify_req = NULL;
}
/* we might as well release our claims on endpoints */
if (acm->notify)
acm->notify->driver_data = NULL;
if (acm->port.out)
acm->port.out->driver_data = NULL;
if (acm->port.in)
acm->port.in->driver_data = NULL;
ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
return status;
}
static int acm_setup(struct usb_function *f, const struct usb_ctrlrequest *ctrl)
{
struct f_acm *acm = func_to_acm(f);
struct usb_composite_dev *cdev = f->config->cdev;
struct usb_request *req = cdev->req;
int value = -EOPNOTSUPP;
u16 w_index = le16_to_cpu(ctrl->wIndex);
u16 w_value = le16_to_cpu(ctrl->wValue);
u16 w_length = le16_to_cpu(ctrl->wLength);
/* composite driver infrastructure handles everything except
* CDC class messages; interface activation uses set_alt().
*
* Note CDC spec table 4 lists the ACM request profile. It requires
* encapsulated command support ... we don't handle any, and respond
* to them by stalling. Options include get/set/clear comm features
* (not that useful) and SEND_BREAK.
*/
switch ((ctrl->bRequestType << 8) | ctrl->bRequest) {
/* SET_LINE_CODING ... just read and save what the host sends */
case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
| USB_CDC_REQ_SET_LINE_CODING:
if (w_length != sizeof(struct usb_cdc_line_coding)
|| w_index != acm->ctrl_id)
goto invalid;
value = w_length;
cdev->gadget->ep0->driver_data = acm;
req->complete = acm_complete_set_line_coding;
break;
/* GET_LINE_CODING ... return what host sent, or initial value */
case ((USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
| USB_CDC_REQ_GET_LINE_CODING:
if (w_index != acm->ctrl_id)
goto invalid;
value = min_t(unsigned, w_length,
sizeof(struct usb_cdc_line_coding));
memcpy(req->buf, &acm->port_line_coding, value);
break;
/* SET_CONTROL_LINE_STATE ... save what the host sent */
case ((USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE) << 8)
| USB_CDC_REQ_SET_CONTROL_LINE_STATE:
if (w_index != acm->ctrl_id)
goto invalid;
value = 0;
/* FIXME we should not allow data to flow until the
* host sets the ACM_CTRL_DTR bit; and when it clears
* that bit, we should return to that no-flow state.
*/
acm->port_handshake_bits = w_value;
break;
default:
invalid:
VDBG(cdev, "invalid control req%02x.%02x v%04x i%04x l%d\n",
ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
}
/* respond with data transfer or status phase? */
if (value >= 0) {
DBG(cdev, "acm ttyGS%d req%02x.%02x v%04x i%04x l%d\n",
acm->port_num, ctrl->bRequestType, ctrl->bRequest,
w_value, w_index, w_length);
req->zero = 0;
req->length = value;
value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC);
if (value < 0)
ERROR(cdev, "acm response on ttyGS%d, err %d\n",
acm->port_num, value);
}
/* device either stalls (value < 0) or reports success */
return value;
}
/* ACM function driver setup/binding */
static int
acm_bind(struct usb_configuration *c, struct usb_function *f)
{
struct usb_composite_dev *cdev = c->cdev;
struct f_acm *acm = func_to_acm(f);
struct usb_string *us;
int status;
struct usb_ep *ep;
D("+\n");
/* REVISIT might want instance-specific strings to help
* distinguish instances ...
*/
/* maybe allocate device-global string IDs, and patch descriptors */
us = usb_gstrings_attach(cdev, acm_strings,
ARRAY_SIZE(acm_string_defs));
if (IS_ERR(us))
return PTR_ERR(us);
acm_control_interface_desc.iInterface = us[ACM_CTRL_IDX].id;
acm_data_interface_desc.iInterface = us[ACM_DATA_IDX].id;
acm_iad_descriptor.iFunction = us[ACM_IAD_IDX].id;
/* allocate instance-specific interface IDs, and patch descriptors */
status = usb_interface_id(c, f);
if (status < 0)
goto fail;
D("interface id: %d\n", status);
if (g_acm_is_single_interface) {
D("single interface\n");
acm->ctrl_id = acm->data_id = status;
acm_single_interface_desc.bInterfaceNumber = status;
acm_call_mgmt_descriptor.bDataInterface = status;
} else {
acm->ctrl_id = (u8)status;
acm_iad_descriptor.bFirstInterface = status;
acm_control_interface_desc.bInterfaceNumber = status;
acm_union_desc .bMasterInterface0 = status;
status = usb_interface_id(c, f);
if (status < 0)
goto fail;
acm->data_id = status;
acm_data_interface_desc.bInterfaceNumber = status;
acm_union_desc.bSlaveInterface0 = status;
acm_call_mgmt_descriptor.bDataInterface = status;
}
bsp_usb_add_setup_dev((unsigned)acm->data_id);
status = -ENODEV;
/* allocate instance-specific endpoints */
D("to ep autoconfig\n");
ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_in_desc);
if (!ep)
goto fail;
acm->port.in = ep;
ep->driver_data = cdev; /* claim */
ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_out_desc);
if (!ep)
goto fail;
acm->port.out = ep;
ep->driver_data = cdev; /* claim */
if (acm->support_notify) {
ep = usb_ep_autoconfig(cdev->gadget, &acm_fs_notify_desc);
if (!ep)
goto fail;
acm->notify = ep;
ep->driver_data = cdev; /* claim */
/* allocate notification */
acm->notify_req = gs_acm_cdev_alloc_req(ep,
sizeof(struct usb_cdc_notification) + 2,
GFP_KERNEL);
if (!acm->notify_req)
goto fail;
acm->notify_req->complete = acm_cdc_notify_complete;
acm->notify_req->context = acm;
} else {
acm->notify = NULL;
acm->notify_req = NULL;
}
/* support all relevant hardware speeds... we expect that when
* hardware is dual speed, all bulk-capable endpoints work at
* both speeds
*/
D("do desc\n");
acm_hs_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
acm_hs_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
if (acm->support_notify)
acm_hs_notify_desc.bEndpointAddress =
acm_fs_notify_desc.bEndpointAddress;
acm_ss_in_desc.bEndpointAddress = acm_fs_in_desc.bEndpointAddress;
acm_ss_out_desc.bEndpointAddress = acm_fs_out_desc.bEndpointAddress;
D("to assign desc\n");
acm_set_config_vendor(acm);
status = usb_assign_descriptors(f, acm_fs_cur_function, acm_hs_cur_function,
acm_ss_cur_function);
if (status)
goto fail;
DBG(cdev, "acm_cdev%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
acm->port_num,
gadget_is_superspeed(c->cdev->gadget) ? "super" :
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
acm->port.in->name, acm->port.out->name,
acm->notify ? acm->notify->name : "null");
printk(KERN_INFO "acm_cdev%d: %s speed IN/%s OUT/%s NOTIFY/%s\n",
acm->port_num,
gadget_is_superspeed(c->cdev->gadget) ? "super" :
gadget_is_dualspeed(c->cdev->gadget) ? "dual" : "full",
acm->port.in->name, acm->port.out->name,
acm->notify ? acm->notify->name : "null");
return 0;
fail:
if (acm->notify_req)
gs_acm_cdev_free_req(acm->notify, acm->notify_req);
/* we might as well release our claims on endpoints */
if (acm->notify)
acm->notify->driver_data = NULL;
if (acm->port.out)
acm->port.out->driver_data = NULL;
if (acm->port.in)
acm->port.in->driver_data = NULL;
ERROR(cdev, "%s/%p: can't bind, err %d\n", f->name, f, status);
D("-\n");
return status;
}
static int acm_set_alt(struct usb_function *f, unsigned intf, unsigned alt)
{
struct f_acm *acm = func_to_acm(f);
struct usb_composite_dev *cdev = f->config->cdev;
bool is_setting = 0;
int ret;
D("+\n");
/* we know alt == 0, so this is an activation or a reset */
/* if it is single interface, intf, acm->ctrl_id and acm->data_id
* are the same, so we can setting data and notify interface in the same time.
*
* if it is multi interface, acm->ctrl_id and acm->data_id are different,
* so the setting is go ahead in different times.
*/
if (intf == acm->ctrl_id) {
is_setting = 1;
if (acm->notify) {
if (acm->notify->driver_data) {
VDBG(cdev, "reset acm control interface %d\n", intf);
usb_ep_disable(acm->notify);
} else {
VDBG(cdev, "init acm ctrl interface %d\n", intf);
if (config_ep_by_speed(cdev->gadget, f, acm->notify))
return -EINVAL;
}
ret = usb_ep_enable(acm->notify);
if (ret < 0) {
ERROR(cdev, "Enable acm interface ep failed\n");
return ret;
}
acm->notify->driver_data = acm;
}
}
if (intf == acm->data_id) {
is_setting = 1;
if (acm->port.in->driver_data) {
DBG(cdev, "reset acm ttyGS%d\n", acm->port_num);
gacm_cdev_disconnect(&acm->port);
}
if (!acm->port.in->desc || !acm->port.out->desc) {
DBG(cdev, "activate acm ttyGS%d\n", acm->port_num);
if (config_ep_by_speed(cdev->gadget, f,
acm->port.in) ||
config_ep_by_speed(cdev->gadget, f,
acm->port.out)) {
acm->port.in->desc = NULL;
acm->port.out->desc = NULL;
return -EINVAL;
}
}
gacm_cdev_connect(&acm->port, acm->port_num);
bsp_usb_set_enum_stat(acm->data_id, 1);
}
if (!is_setting)
return -EINVAL;
D("-\n");
return 0;
}
static void acm_resume(struct usb_function *f)
{
struct f_acm *acm = func_to_acm(f);
gacm_cdev_resume_notify(&acm->port);
}
static void acm_suspend(struct usb_function *f)
{
struct f_acm *acm = func_to_acm(f);
gacm_cdev_suspend_notify(&acm->port);
}