static void image_print_type(const image_header_t *hdr)
{
const char *os, *arch, *type, *comp;
os = genimg_get_os_name(image_get_os(hdr));
arch = genimg_get_arch_name(image_get_arch(hdr));
type = genimg_get_type_name(image_get_type(hdr));
comp = genimg_get_comp_name(image_get_comp(hdr));
printf("%s %s %s (%s)\n", arch, os, type, comp);
}
/**
* fit_image_print - prints out the FIT component image details
* @fit: pointer to the FIT format image header
* @image_noffset: offset of the component image node
* @p: pointer to prefix string
*
* fit_image_print() lists all mandatory properies for the processed component
* image. If present, hash nodes are printed out as well. Load
* address for images of type firmware is also printed out. Since the load
* address is not mandatory for firmware images, it will be output as
* "unavailable" when not present.
*
* returns:
* no returned results
*/
void fit_image_print(const void *fit, int image_noffset, const char *p)
{
char *desc;
uint8_t type, arch, os, comp;
size_t size;
ulong load, entry;
const void *data;
int noffset;
int ndepth;
int ret;
/* Mandatory properties */
ret = fit_get_desc(fit, image_noffset, &desc);
printf("%s Description: ", p);
if (ret)
printf("unavailable\n");
else
printf("%s\n", desc);
fit_image_get_type(fit, image_noffset, &type);
printf("%s Type: %s\n", p, genimg_get_type_name(type));
fit_image_get_comp(fit, image_noffset, &comp);
printf("%s Compression: %s\n", p, genimg_get_comp_name(comp));
ret = fit_image_get_data(fit, image_noffset, &data, &size);
#ifndef USE_HOSTCC
printf("%s Data Start: ", p);
if (ret) {
printf("unavailable\n");
} else {
void *vdata = (void *)data;
printf("0x%08lx\n", (ulong)map_to_sysmem(vdata));
}
#endif
printf("%s Data Size: ", p);
if (ret)
printf("unavailable\n");
else
genimg_print_size(size);
/* Remaining, type dependent properties */
if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
(type == IH_TYPE_RAMDISK) || (type == IH_TYPE_FIRMWARE) ||
(type == IH_TYPE_FLATDT)) {
fit_image_get_arch(fit, image_noffset, &arch);
printf("%s Architecture: %s\n", p, genimg_get_arch_name(arch));
}
if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_RAMDISK)) {
fit_image_get_os(fit, image_noffset, &os);
printf("%s OS: %s\n", p, genimg_get_os_name(os));
}
if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
(type == IH_TYPE_FIRMWARE) || (type == IH_TYPE_RAMDISK)) {
ret = fit_image_get_load(fit, image_noffset, &load);
printf("%s Load Address: ", p);
if (ret)
printf("unavailable\n");
else
printf("0x%08lx\n", load);
}
if ((type == IH_TYPE_KERNEL) || (type == IH_TYPE_STANDALONE) ||
(type == IH_TYPE_RAMDISK)) {
fit_image_get_entry(fit, image_noffset, &entry);
printf("%s Entry Point: ", p);
if (ret)
printf("unavailable\n");
else
printf("0x%08lx\n", entry);
}
/* Process all hash subnodes of the component image node */
for (ndepth = 0, noffset = fdt_next_node(fit, image_noffset, &ndepth);
(noffset >= 0) && (ndepth > 0);
noffset = fdt_next_node(fit, noffset, &ndepth)) {
if (ndepth == 1) {
/* Direct child node of the component image node */
fit_image_print_verification_data(fit, noffset, p);
}
}
}
int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
ulong iflag;
ulong load_end = 0;
int ret;
boot_os_fn *boot_fn;
/* relocate boot function table */
if (!relocated) {
int i;
for (i = 0; i < ARRAY_SIZE(boot_os); i++)
if (boot_os[i] != NULL)
boot_os[i] += gd->reloc_off;
relocated = 1;
}
/* determine if we have a sub command */
if (argc > 1) {
char *endp;
simple_strtoul(argv[1], &endp, 16);
/* endp pointing to NULL means that argv[1] was just a
* valid number, pass it along to the normal bootm processing
*
* If endp is ':' or '#' assume a FIT identifier so pass
* along for normal processing.
*
* Right now we assume the first arg should never be '-'
*/
if ((*endp != 0) && (*endp != ':') && (*endp != '#'))
return do_bootm_subcommand(cmdtp, flag, argc, argv);
}
if (bootm_start(cmdtp, flag, argc, argv))
return 1;
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
#ifdef CONFIG_AMIGAONEG3SE
/*
* We've possible left the caches enabled during
* bios emulation, so turn them off again
*/
icache_disable();
dcache_disable();
#endif
ret = bootm_load_os(images.os, &load_end, 1);
if (ret < 0) {
if (ret == BOOTM_ERR_RESET)
do_reset (cmdtp, flag, argc, argv);
if (ret == BOOTM_ERR_OVERLAP) {
if (images.legacy_hdr_valid) {
if (image_get_type (&images.legacy_hdr_os_copy) == IH_TYPE_MULTI)
puts ("WARNING: legacy format multi component "
"image overwritten\n");
} else {
puts ("ERROR: new format image overwritten - "
"must RESET the board to recover\n");
show_boot_progress (-113);
do_reset (cmdtp, flag, argc, argv);
}
}
if (ret == BOOTM_ERR_UNIMPLEMENTED) {
if (iflag)
enable_interrupts();
show_boot_progress (-7);
return 1;
}
}
lmb_reserve(&images.lmb, images.os.load, (load_end - images.os.load));
if (images.os.type == IH_TYPE_STANDALONE) {
if (iflag)
enable_interrupts();
/* This may return when 'autostart' is 'no' */
bootm_start_standalone(iflag, argc, argv);
return 0;
}
show_boot_progress (8);
#ifdef CONFIG_SILENT_CONSOLE
if (images.os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
boot_fn = boot_os[images.os.os];
if (boot_fn == NULL) {
if (iflag)
enable_interrupts();
printf ("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images.os.os), images.os.os);
show_boot_progress (-8);
return 1;
}
boot_fn(0, argc, argv, &images);
show_boot_progress (-9);
#ifdef DEBUG
puts ("\n## Control returned to monitor - resetting...\n");
#endif
do_reset (cmdtp, flag, argc, argv);
return 1;
}
int fit_image_load(bootm_headers_t *images, ulong addr,
const char **fit_unamep, const char **fit_uname_configp,
int arch, int image_type, int bootstage_id,
enum fit_load_op load_op, ulong *datap, ulong *lenp)
{
int cfg_noffset, noffset;
const char *fit_uname;
const char *fit_uname_config;
const void *fit;
const void *buf;
size_t size;
int type_ok, os_ok;
ulong load, data, len;
uint8_t os;
const char *prop_name;
int ret;
fit = map_sysmem(addr, 0);
fit_uname = fit_unamep ? *fit_unamep : NULL;
fit_uname_config = fit_uname_configp ? *fit_uname_configp : NULL;
prop_name = fit_get_image_type_property(image_type);
printf("## Loading %s from FIT Image at %08lx ...\n", prop_name, addr);
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_FORMAT);
if (!fit_check_format(fit)) {
printf("Bad FIT %s image format!\n", prop_name);
bootstage_error(bootstage_id + BOOTSTAGE_SUB_FORMAT);
return -ENOEXEC;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_FORMAT_OK);
if (fit_uname) {
/* get FIT component image node offset */
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_UNIT_NAME);
noffset = fit_image_get_node(fit, fit_uname);
} else {
/*
* no image node unit name, try to get config
* node first. If config unit node name is NULL
* fit_conf_get_node() will try to find default config node
*/
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_NO_UNIT_NAME);
if (IMAGE_ENABLE_BEST_MATCH && !fit_uname_config) {
cfg_noffset = fit_conf_find_compat(fit, gd_fdt_blob());
} else {
cfg_noffset = fit_conf_get_node(fit,
fit_uname_config);
}
if (cfg_noffset < 0) {
puts("Could not find configuration node\n");
bootstage_error(bootstage_id +
BOOTSTAGE_SUB_NO_UNIT_NAME);
return -ENOENT;
}
fit_uname_config = fdt_get_name(fit, cfg_noffset, NULL);
printf(" Using '%s' configuration\n", fit_uname_config);
if (image_type == IH_TYPE_KERNEL) {
/* Remember (and possibly verify) this config */
images->fit_uname_cfg = fit_uname_config;
if (IMAGE_ENABLE_VERIFY && images->verify) {
puts(" Verifying Hash Integrity ... ");
if (fit_config_verify(fit, cfg_noffset)) {
puts("Bad Data Hash\n");
bootstage_error(bootstage_id +
BOOTSTAGE_SUB_HASH);
return -EACCES;
}
puts("OK\n");
}
bootstage_mark(BOOTSTAGE_ID_FIT_CONFIG);
}
noffset = fit_conf_get_prop_node(fit, cfg_noffset,
prop_name);
fit_uname = fit_get_name(fit, noffset, NULL);
}
if (noffset < 0) {
puts("Could not find subimage node\n");
bootstage_error(bootstage_id + BOOTSTAGE_SUB_SUBNODE);
return -ENOENT;
}
printf(" Trying '%s' %s subimage\n", fit_uname, prop_name);
ret = fit_image_select(fit, noffset, images->verify);
if (ret) {
bootstage_error(bootstage_id + BOOTSTAGE_SUB_HASH);
return ret;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ARCH);
#if !defined(USE_HOSTCC) && !defined(CONFIG_SANDBOX)
if (!fit_image_check_target_arch(fit, noffset)) {
puts("Unsupported Architecture\n");
bootstage_error(bootstage_id + BOOTSTAGE_SUB_CHECK_ARCH);
return -ENOEXEC;
}
#endif
if (image_type == IH_TYPE_FLATDT &&
!fit_image_check_comp(fit, noffset, IH_COMP_NONE)) {
puts("FDT image is compressed");
return -EPROTONOSUPPORT;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL);
type_ok = fit_image_check_type(fit, noffset, image_type) ||
(image_type == IH_TYPE_KERNEL &&
fit_image_check_type(fit, noffset,
IH_TYPE_KERNEL_NOLOAD));
os_ok = image_type == IH_TYPE_FLATDT ||
fit_image_check_os(fit, noffset, IH_OS_LINUX) ||
fit_image_check_os(fit, noffset, IH_OS_OPENRTOS);
/*
* If either of the checks fail, we should report an error, but
* if the image type is coming from the "loadables" field, we
* don't care what it is
*/
if ((!type_ok || !os_ok) && image_type != IH_TYPE_LOADABLE) {
fit_image_get_os(fit, noffset, &os);
printf("No %s %s %s Image\n",
genimg_get_os_name(os),
genimg_get_arch_name(arch),
genimg_get_type_name(image_type));
bootstage_error(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL);
return -EIO;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_CHECK_ALL_OK);
/* get image data address and length */
if (fit_image_get_data(fit, noffset, &buf, &size)) {
printf("Could not find %s subimage data!\n", prop_name);
bootstage_error(bootstage_id + BOOTSTAGE_SUB_GET_DATA);
return -ENOENT;
}
len = (ulong)size;
/* verify that image data is a proper FDT blob */
if (image_type == IH_TYPE_FLATDT && fdt_check_header(buf)) {
puts("Subimage data is not a FDT");
return -ENOEXEC;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_GET_DATA_OK);
/*
* Work-around for eldk-4.2 which gives this warning if we try to
* cast in the unmap_sysmem() call:
* warning: initialization discards qualifiers from pointer target type
*/
{
void *vbuf = (void *)buf;
data = map_to_sysmem(vbuf);
}
if (load_op == FIT_LOAD_IGNORED) {
/* Don't load */
} else if (fit_image_get_load(fit, noffset, &load)) {
if (load_op == FIT_LOAD_REQUIRED) {
printf("Can't get %s subimage load address!\n",
prop_name);
bootstage_error(bootstage_id + BOOTSTAGE_SUB_LOAD);
return -EBADF;
}
} else if (load_op != FIT_LOAD_OPTIONAL_NON_ZERO || load) {
ulong image_start, image_end;
ulong load_end;
void *dst;
/*
* move image data to the load address,
* make sure we don't overwrite initial image
*/
image_start = addr;
image_end = addr + fit_get_size(fit);
load_end = load + len;
if (image_type != IH_TYPE_KERNEL &&
load < image_end && load_end > image_start) {
printf("Error: %s overwritten\n", prop_name);
return -EXDEV;
}
printf(" Loading %s from 0x%08lx to 0x%08lx\n",
prop_name, data, load);
dst = map_sysmem(load, len);
memmove(dst, buf, len);
data = load;
}
bootstage_mark(bootstage_id + BOOTSTAGE_SUB_LOAD);
*datap = data;
*lenp = len;
if (fit_unamep)
*fit_unamep = (char *)fit_uname;
if (fit_uname_configp)
*fit_uname_configp = (char *)fit_uname_config;
return noffset;
}
int do_bootm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong iflag;
ulong load_end = 0;
int ret;
boot_os_fn *boot_fn;
#ifdef CONFIG_NEEDS_MANUAL_RELOC
static int relocated = 0;
if (!relocated) {
int i;
/* relocate boot function table */
for (i = 0; i < ARRAY_SIZE(boot_os); i++)
if (boot_os[i] != NULL)
boot_os[i] += gd->reloc_off;
/* relocate names of sub-command table */
for (i = 0; i < ARRAY_SIZE(cmd_bootm_sub); i++)
cmd_bootm_sub[i].name += gd->reloc_off;
relocated = 1;
}
#endif
/* determine if we have a sub command */
if (argc > 1) {
char *endp;
simple_strtoul(argv[1], &endp, 16);
/* endp pointing to NULL means that argv[1] was just a
* valid number, pass it along to the normal bootm processing
*
* If endp is ':' or '#' assume a FIT identifier so pass
* along for normal processing.
*
* Right now we assume the first arg should never be '-'
*/
if ((*endp != 0) && (*endp != ':') && (*endp != '#'))
return do_bootm_subcommand(cmdtp, flag, argc, argv);
}
if (bootm_start(cmdtp, flag, argc, argv))
return 1;
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#ifdef CONFIG_NETCONSOLE
/* Stop the ethernet stack if NetConsole could have left it up */
eth_halt();
#endif
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
ret = bootm_load_os(images.os, &load_end, 1);
if (ret < 0) {
if (ret == BOOTM_ERR_RESET)
do_reset(cmdtp, flag, argc, argv);
if (ret == BOOTM_ERR_OVERLAP) {
if (images.legacy_hdr_valid) {
image_header_t *hdr;
hdr = &images.legacy_hdr_os_copy;
if (image_get_type(hdr) == IH_TYPE_MULTI)
puts("WARNING: legacy format multi "
"component image "
"overwritten\n");
} else {
puts("ERROR: new format image overwritten - "
"must RESET the board to recover\n");
bootstage_error(BOOTSTAGE_ID_OVERWRITTEN);
do_reset(cmdtp, flag, argc, argv);
}
}
if (ret == BOOTM_ERR_UNIMPLEMENTED) {
if (iflag)
enable_interrupts();
bootstage_error(BOOTSTAGE_ID_DECOMP_UNIMPL);
return 1;
}
}
lmb_reserve(&images.lmb, images.os.load, (load_end - images.os.load));
if (images.os.type == IH_TYPE_STANDALONE) {
if (iflag)
enable_interrupts();
/* This may return when 'autostart' is 'no' */
bootm_start_standalone(iflag, argc, argv);
return 0;
}
bootstage_mark(BOOTSTAGE_ID_CHECK_BOOT_OS);
#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY)
if (images.os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
boot_fn = boot_os[images.os.os];
if (boot_fn == NULL) {
if (iflag)
enable_interrupts();
printf("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images.os.os), images.os.os);
bootstage_error(BOOTSTAGE_ID_CHECK_BOOT_OS);
return 1;
}
arch_preboot_os();
boot_fn(0, argc, argv, &images);
bootstage_error(BOOTSTAGE_ID_BOOT_OS_RETURNED);
#ifdef DEBUG
puts("\n## Control returned to monitor - resetting...\n");
#endif
do_reset(cmdtp, flag, argc, argv);
return 1;
}
/**
* Execute selected states of the bootm command.
*
* Note the arguments to this state must be the first argument, Any 'bootm'
* or sub-command arguments must have already been taken.
*
* Note that if states contains more than one flag it MUST contain
* BOOTM_STATE_START, since this handles and consumes the command line args.
*
* Also note that aside from boot_os_fn functions and bootm_load_os no other
* functions we store the return value of in 'ret' may use a negative return
* value, without special handling.
*
* @param cmdtp Pointer to bootm command table entry
* @param flag Command flags (CMD_FLAG_...)
* @param argc Number of subcommand arguments (0 = no arguments)
* @param argv Arguments
* @param states Mask containing states to run (BOOTM_STATE_...)
* @param images Image header information
* @param boot_progress 1 to show boot progress, 0 to not do this
* @return 0 if ok, something else on error. Some errors will cause this
* function to perform a reboot! If states contains BOOTM_STATE_OS_GO
* then the intent is to boot an OS, so this function will not return
* unless the image type is standalone.
*/
static int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[], int states, bootm_headers_t *images,
int boot_progress)
{
boot_os_fn *boot_fn;
ulong iflag = 0;
int ret = 0, need_boot_fn;
images->state |= states;
/*
* Work through the states and see how far we get. We stop on
* any error.
*/
if (states & BOOTM_STATE_START)
ret = bootm_start(cmdtp, flag, argc, argv);
if (!ret && (states & BOOTM_STATE_FINDOS))
ret = bootm_find_os(cmdtp, flag, argc, argv);
if (!ret && (states & BOOTM_STATE_FINDOTHER)) {
ret = bootm_find_other(cmdtp, flag, argc, argv);
argc = 0; /* consume the args */
}
/* Load the OS */
if (!ret && (states & BOOTM_STATE_LOADOS)) {
ulong load_end;
iflag = bootm_disable_interrupts();
ret = bootm_load_os(images, &load_end, 0);
if (ret == 0)
lmb_reserve(&images->lmb, images->os.load,
(load_end - images->os.load));
else if (ret && ret != BOOTM_ERR_OVERLAP)
goto err;
else if (ret == BOOTM_ERR_OVERLAP)
ret = 0;
#if defined(CONFIG_SILENT_CONSOLE) && !defined(CONFIG_SILENT_U_BOOT_ONLY)
if (images->os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
}
/* Relocate the ramdisk */
#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
if (!ret && (states & BOOTM_STATE_RAMDISK)) {
ulong rd_len = images->rd_end - images->rd_start;
ret = boot_ramdisk_high(&images->lmb, images->rd_start,
rd_len, &images->initrd_start, &images->initrd_end);
if (!ret) {
setenv_hex("initrd_start", images->initrd_start);
setenv_hex("initrd_end", images->initrd_end);
}
}
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_LMB)
if (!ret && (states & BOOTM_STATE_FDT)) {
boot_fdt_add_mem_rsv_regions(&images->lmb, images->ft_addr);
ret = boot_relocate_fdt(&images->lmb, &images->ft_addr,
&images->ft_len);
}
#endif
/* From now on, we need the OS boot function */
if (ret)
return ret;
boot_fn = boot_os[images->os.os];
need_boot_fn = states & (BOOTM_STATE_OS_CMDLINE |
BOOTM_STATE_OS_BD_T | BOOTM_STATE_OS_PREP |
BOOTM_STATE_OS_FAKE_GO | BOOTM_STATE_OS_GO);
if (boot_fn == NULL && need_boot_fn) {
if (iflag)
enable_interrupts();
printf("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images->os.os), images->os.os);
bootstage_error(BOOTSTAGE_ID_CHECK_BOOT_OS);
return 1;
}
/* Call various other states that are not generally used */
if (!ret && (states & BOOTM_STATE_OS_CMDLINE))
ret = boot_fn(BOOTM_STATE_OS_CMDLINE, argc, argv, images);
if (!ret && (states & BOOTM_STATE_OS_BD_T))
ret = boot_fn(BOOTM_STATE_OS_BD_T, argc, argv, images);
if (!ret && (states & BOOTM_STATE_OS_PREP))
ret = boot_fn(BOOTM_STATE_OS_PREP, argc, argv, images);
#ifdef CONFIG_TRACE
/* Pretend to run the OS, then run a user command */
if (!ret && (states & BOOTM_STATE_OS_FAKE_GO)) {
char *cmd_list = getenv("fakegocmd");
ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_FAKE_GO,
images, boot_fn);
if (!ret && cmd_list)
ret = run_command_list(cmd_list, -1, flag);
}
#endif
/* Check for unsupported subcommand. */
if (ret) {
puts("subcommand not supported\n");
return ret;
}
/* Now run the OS! We hope this doesn't return */
if (!ret && (states & BOOTM_STATE_OS_GO))
ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_GO,
images, boot_fn);
/* Deal with any fallout */
err:
if (iflag)
enable_interrupts();
if (ret == BOOTM_ERR_UNIMPLEMENTED)
bootstage_error(BOOTSTAGE_ID_DECOMP_UNIMPL);
else if (ret == BOOTM_ERR_RESET)
do_reset(cmdtp, flag, argc, argv);
return ret;
}
int spl_load_simple_fit(struct spl_image_info *spl_image,
struct spl_load_info *info, ulong sector, void *fit)
{
int sectors;
ulong size;
unsigned long count;
struct spl_image_info image_info;
int node = -1;
int images, ret;
int base_offset, align_len = ARCH_DMA_MINALIGN - 1;
int index = 0;
/*
* For FIT with external data, figure out where the external images
* start. This is the base for the data-offset properties in each
* image.
*/
size = fdt_totalsize(fit);
size = (size + 3) & ~3;
base_offset = (size + 3) & ~3;
/*
* So far we only have one block of data from the FIT. Read the entire
* thing, including that first block, placing it so it finishes before
* where we will load the image.
*
* Note that we will load the image such that its first byte will be
* at the load address. Since that byte may be part-way through a
* block, we may load the image up to one block before the load
* address. So take account of that here by subtracting an addition
* block length from the FIT start position.
*
* In fact the FIT has its own load address, but we assume it cannot
* be before CONFIG_SYS_TEXT_BASE.
*
* For FIT with data embedded, data is loaded as part of FIT image.
* For FIT with external data, data is not loaded in this step.
*/
fit = (void *)((CONFIG_SYS_TEXT_BASE - size - info->bl_len -
align_len) & ~align_len);
sectors = get_aligned_image_size(info, size, 0);
count = info->read(info, sector, sectors, fit);
debug("fit read sector %lx, sectors=%d, dst=%p, count=%lu\n",
sector, sectors, fit, count);
if (count == 0)
return -EIO;
/* find the node holding the images information */
images = fdt_path_offset(fit, FIT_IMAGES_PATH);
if (images < 0) {
debug("%s: Cannot find /images node: %d\n", __func__, images);
return -1;
}
/*
* Find the U-Boot image using the following search order:
* - start at 'firmware' (e.g. an ARM Trusted Firmware)
* - fall back 'kernel' (e.g. a Falcon-mode OS boot
* - fall back to using the first 'loadables' entry
*/
if (node < 0)
node = spl_fit_get_image_node(fit, images, "firmware", 0);
#ifdef CONFIG_SPL_OS_BOOT
if (node < 0)
node = spl_fit_get_image_node(fit, images, FIT_KERNEL_PROP, 0);
#endif
if (node < 0) {
debug("could not find firmware image, trying loadables...\n");
node = spl_fit_get_image_node(fit, images, "loadables", 0);
/*
* If we pick the U-Boot image from "loadables", start at
* the second image when later loading additional images.
*/
index = 1;
}
if (node < 0) {
debug("%s: Cannot find u-boot image node: %d\n",
__func__, node);
return -1;
}
/* Load the image and set up the spl_image structure */
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
spl_image);
if (ret)
return ret;
/*
* For backward compatibility, we treat the first node that is
* as a U-Boot image, if no OS-type has been declared.
*/
if (!spl_fit_image_get_os(fit, node, &spl_image->os))
debug("Image OS is %s\n", genimg_get_os_name(spl_image->os));
#if !defined(CONFIG_SPL_OS_BOOT)
else
spl_image->os = IH_OS_U_BOOT;
#endif
/*
* Booting a next-stage U-Boot may require us to append the FDT.
* We allow this to fail, as the U-Boot image might embed its FDT.
*/
if (spl_image->os == IH_OS_U_BOOT)
spl_fit_append_fdt(spl_image, info, sector, fit,
images, base_offset);
/* Now check if there are more images for us to load */
for (; ; index++) {
uint8_t os_type = IH_OS_INVALID;
node = spl_fit_get_image_node(fit, images, "loadables", index);
if (node < 0)
break;
ret = spl_load_fit_image(info, sector, fit, base_offset, node,
&image_info);
if (ret < 0)
continue;
if (!spl_fit_image_get_os(fit, node, &os_type))
debug("Loadable is %s\n", genimg_get_os_name(os_type));
if (os_type == IH_OS_U_BOOT) {
spl_fit_append_fdt(&image_info, info, sector,
fit, images, base_offset);
spl_image->fdt_addr = image_info.fdt_addr;
}
/*
* If the "firmware" image did not provide an entry point,
* use the first valid entry point from the loadables.
*/
if (spl_image->entry_point == FDT_ERROR &&
image_info.entry_point != FDT_ERROR)
spl_image->entry_point = image_info.entry_point;
/* Record our loadables into the FDT */
if (spl_image->fdt_addr)
spl_fit_record_loadable(fit, images, index,
spl_image->fdt_addr,
&image_info);
}
/*
* If a platform does not provide CONFIG_SYS_UBOOT_START, U-Boot's
* Makefile will set it to 0 and it will end up as the entry point
* here. What it actually means is: use the load address.
*/
if (spl_image->entry_point == FDT_ERROR || spl_image->entry_point == 0)
spl_image->entry_point = spl_image->load_addr;
return 0;
}
/**
* Execute selected states of the bootm command.
*
* Note the arguments to this state must be the first argument, Any 'bootm'
* or sub-command arguments must have already been taken.
*
* Note that if states contains more than one flag it MUST contain
* BOOTM_STATE_START, since this handles and consumes the command line args.
*
* Also note that aside from boot_os_fn functions and bootm_load_os no other
* functions we store the return value of in 'ret' may use a negative return
* value, without special handling.
*
* @param cmdtp Pointer to bootm command table entry
* @param flag Command flags (CMD_FLAG_...)
* @param argc Number of subcommand arguments (0 = no arguments)
* @param argv Arguments
* @param states Mask containing states to run (BOOTM_STATE_...)
* @param images Image header information
* @param boot_progress 1 to show boot progress, 0 to not do this
* @return 0 if ok, something else on error. Some errors will cause this
* function to perform a reboot! If states contains BOOTM_STATE_OS_GO
* then the intent is to boot an OS, so this function will not return
* unless the image type is standalone.
*/
static int do_bootm_states(cmd_tbl_t *cmdtp, int flag, int argc,
char * const argv[], int states, bootm_headers_t *images,
int boot_progress)
{
boot_os_fn *boot_fn;
ulong iflag = 0;
int ret = 0;
images->state |= states;
/*
* Work through the states and see how far we get. We stop on
* any error.
*/
if (states & BOOTM_STATE_START)
ret = bootm_start(cmdtp, flag, argc, argv);
if (!ret && (states & BOOTM_STATE_FINDOS))
ret = bootm_find_os(cmdtp, flag, argc, argv);
if (!ret && (states & BOOTM_STATE_FINDOTHER)) {
ret = bootm_find_other(cmdtp, flag, argc, argv);
argc = 0; /* consume the args */
}
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#ifdef CONFIG_NETCONSOLE
/* Stop the ethernet stack if NetConsole could have left it up */
eth_halt();
#endif
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
/* Load the OS */
if (!ret && (states & BOOTM_STATE_LOADOS)) {
ulong load_end;
ret = bootm_load_os(images, &load_end, 0);
if (ret && ret != BOOTM_ERR_OVERLAP)
goto err;
if (ret == 0)
lmb_reserve(&images->lmb, images->os.load,
(load_end - images->os.load));
else if (ret == BOOTM_ERR_OVERLAP)
ret = 0;
}
/* Relocate the ramdisk */
#ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
if (!ret && (states & BOOTM_STATE_RAMDISK)) {
ulong rd_len = images->rd_end - images->rd_start;
ret = boot_ramdisk_high(&images->lmb, images->rd_start,
rd_len, &images->initrd_start, &images->initrd_end);
if (!ret) {
setenv_hex("initrd_start", images->initrd_start);
setenv_hex("initrd_end", images->initrd_end);
}
}
#endif
#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_LMB)
if (!ret && (states & BOOTM_STATE_FDT)) {
boot_fdt_add_mem_rsv_regions(&images->lmb, images->ft_addr);
ret = boot_relocate_fdt(&images->lmb, &images->ft_addr,
&images->ft_len);
}
#endif
/* From now on, we need the OS boot function */
if (ret)
return ret;
boot_fn = boot_os[images->os.os];
if (boot_fn == NULL) {
if (iflag)
enable_interrupts();
printf("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images->os.os), images->os.os);
bootstage_error(BOOTSTAGE_ID_CHECK_BOOT_OS);
return 1;
}
/* Call various other states that are not generally used */
if (!ret && (states & BOOTM_STATE_OS_CMDLINE))
ret = boot_fn(BOOTM_STATE_OS_CMDLINE, argc, argv, images);
if (!ret && (states & BOOTM_STATE_OS_BD_T))
ret = boot_fn(BOOTM_STATE_OS_BD_T, argc, argv, images);
if (!ret && (states & BOOTM_STATE_OS_PREP))
ret = boot_fn(BOOTM_STATE_OS_PREP, argc, argv, images);
#ifdef CONFIG_TRACE
/* Pretend to run the OS, then run a user command */
if (!ret && (states & BOOTM_STATE_OS_FAKE_GO)) {
char *cmd_list = getenv("fakegocmd");
ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_FAKE_GO,
images, boot_fn);
if (!ret && cmd_list)
ret = run_command_list(cmd_list, -1, flag);
}
#endif
/* Now run the OS! We hope this doesn't return */
if (!ret && (states & BOOTM_STATE_OS_GO)) {
ret = boot_selected_os(argc, argv, BOOTM_STATE_OS_GO,
images, boot_fn);
if (ret)
goto err;
}
return ret;
/* Deal with any fallout */
err:
if (iflag)
enable_interrupts();
if (ret == BOOTM_ERR_UNIMPLEMENTED)
bootstage_error(BOOTSTAGE_ID_DECOMP_UNIMPL);
else if (ret == BOOTM_ERR_RESET)
do_reset(cmdtp, flag, argc, argv);
else
puts("subcommand not supported\n");
return ret;
}
int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong iflag;
ulong load_end = 0;
int ret;
boot_os_fn *boot_fn;
#ifdef CONFIG_SECURE_BOOT
#ifndef CONFIG_SECURE_BL1_ONLY
security_check();
#endif
#endif
char cmdbuffer[64];
sprintf(cmdbuffer,"sdfuse autocheck");
run_command(cmdbuffer, 0);
exynos4412_screen_backlight(0);
#ifdef CONFIG_ZIMAGE_BOOT
#define LINUX_ZIMAGE_MAGIC 0x016f2818
image_header_t *hdr;
ulong addr;
/* find out kernel image address */
if (argc < 2) {
addr = load_addr;
debug ("* kernel: default image load address = 0x%08lx\n",
load_addr);
} else {
addr = simple_strtoul(argv[1], NULL, 16);
}
if (*(ulong *)(addr + 9*4) == LINUX_ZIMAGE_MAGIC) {
u32 val;
printf("Boot with zImage\n");
//addr = virt_to_phys(addr);
hdr = (image_header_t *)addr;
hdr->ih_os = IH_OS_LINUX;
hdr->ih_ep = ntohl(addr);
memmove (&images.legacy_hdr_os_copy, hdr, sizeof(image_header_t));
/* save pointer to image header */
images.legacy_hdr_os = hdr;
images.legacy_hdr_valid = 1;
goto after_header_check;
}
#endif
#ifdef CONFIG_NEEDS_MANUAL_RELOC
static int relocated = 0;
/* relocate boot function table */
if (!relocated) {
int i;
for (i = 0; i < ARRAY_SIZE(boot_os); i++)
if (boot_os[i] != NULL)
boot_os[i] += gd->reloc_off;
relocated = 1;
}
#endif
/* determine if we have a sub command */
if (argc > 1) {
char *endp;
simple_strtoul(argv[1], &endp, 16);
/* endp pointing to NULL means that argv[1] was just a
* valid number, pass it along to the normal bootm processing
*
* If endp is ':' or '#' assume a FIT identifier so pass
* along for normal processing.
*
* Right now we assume the first arg should never be '-'
*/
if ((*endp != 0) && (*endp != ':') && (*endp != '#'))
return do_bootm_subcommand(cmdtp, flag, argc, argv);
}
if (bootm_start(cmdtp, flag, argc, argv))
return 1;
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
ret = bootm_load_os(images.os, &load_end, 1);
if (ret < 0) {
if (ret == BOOTM_ERR_RESET)
do_reset (cmdtp, flag, argc, argv);
if (ret == BOOTM_ERR_OVERLAP) {
if (images.legacy_hdr_valid) {
if (image_get_type (&images.legacy_hdr_os_copy) == IH_TYPE_MULTI)
puts ("WARNING: legacy format multi component "
"image overwritten\n");
} else {
puts ("ERROR: new format image overwritten - "
"must RESET the board to recover\n");
show_boot_progress (-113);
do_reset (cmdtp, flag, argc, argv);
}
}
if (ret == BOOTM_ERR_UNIMPLEMENTED) {
if (iflag)
enable_interrupts();
show_boot_progress (-7);
return 1;
}
}
lmb_reserve(&images.lmb, images.os.load, (load_end - images.os.load));
if (images.os.type == IH_TYPE_STANDALONE) {
if (iflag)
enable_interrupts();
/* This may return when 'autostart' is 'no' */
bootm_start_standalone(iflag, argc, argv);
return 0;
}
show_boot_progress (8);
#if defined(CONFIG_ZIMAGE_BOOT)
after_header_check:
images.os.os = hdr->ih_os;
images.ep = image_get_ep (&images.legacy_hdr_os_copy);
#endif
#ifdef CONFIG_SILENT_CONSOLE
if (images.os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
boot_fn = boot_os[images.os.os];
if (boot_fn == NULL) {
if (iflag)
enable_interrupts();
printf ("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images.os.os), images.os.os);
show_boot_progress (-8);
return 1;
}
arch_preboot_os();
boot_fn(0, argc, argv, &images);
show_boot_progress (-9);
#ifdef DEBUG
puts ("\n## Control returned to monitor - resetting...\n");
#endif
do_reset (cmdtp, flag, argc, argv);
return 1;
}
int do_bootm (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
ulong iflag;
ulong load_end = 0;
int ret = 0;
boot_os_fn *boot_fn;
AML_LOG_INIT("cmd_bootm");
AML_LOG_TE("cmd_bootm");
#ifdef TEST_UBOOT_BOOT_SPEND_TIME
bootm_start_time = get_utimer(0);
#endif
#ifdef CONFIG_NEEDS_MANUAL_RELOC
static int relocated = 0;
/* relocate boot function table */
if (!relocated) {
int i;
for (i = 0; i < ARRAY_SIZE(boot_os); i++)
if (boot_os[i] != NULL)
boot_os[i] += gd->reloc_off;
relocated = 1;
}
#endif
AML_LOG_TE("cmd_bootm");
#ifdef CONFIG_RESET_TO_SYSTEM
struct aml_pmu_driver *pmu_driver = NULL;
pmu_driver = aml_pmu_get_driver();
if (pmu_driver && pmu_driver->pmu_reset_flag_operation) {
pmu_driver->pmu_reset_flag_operation(RESET_FLAG_SET);
}
#endif
AML_LOG_TE("cmd_bootm");
#ifdef CONFIG_M6_SECU_BOOT
#ifdef CONFIG_MESON_TRUSTZONE
extern int meson_trustzone_boot_check(unsigned char *addr);
ret = meson_trustzone_boot_check((unsigned char*)load_addr);
#else
extern int aml_decrypt_kernel_image(void* kernel_image_address);
ret = aml_decrypt_kernel_image((void*)load_addr);
#endif
if(ret != 0)
{
printf("Error! Illegal kernel image, please check!\n");
return ret;
}
#endif //CONFIG_M6_SECU_BOOT
AML_LOG_TE("cmd_bootm");
#ifdef CONFIG_AML_SECU_BOOT_V2
#ifdef CONFIG_MESON_TRUSTZONE
extern int meson_trustzone_boot_check(unsigned char *addr);
if(!g_nIMGReadFlag)
ret = meson_trustzone_boot_check(aml_get_kernel_crypto_addr(argc < 2 ? NULL : argv[1]));
#else
extern int aml_sec_boot_check(unsigned char *pSRC);
if(!g_nIMGReadFlag)
ret = aml_sec_boot_check(aml_get_kernel_crypto_addr(argc < 2 ? NULL : argv[1]));
#endif
if(0 != ret)
return ret;
#endif //CONFIG_AML_SECU_BOOT_V2
AML_LOG_TE("cmd_bootm");
#ifdef CONFIG_AML_GATE_INIT
extern void gate_init(void);
gate_init();
#endif
/* determine if we have a sub command */
if (argc > 1) {
char *endp;
simple_strtoul(argv[1], &endp, 16);
/* endp pointing to NULL means that argv[1] was just a
* valid number, pass it along to the normal bootm processing
*
* If endp is ':' or '#' assume a FIT identifier so pass
* along for normal processing.
*
* Right now we assume the first arg should never be '-'
*/
if ((*endp != 0) && (*endp != ':') && (*endp != '#'))
return do_bootm_subcommand(cmdtp, flag, argc, argv);
}
AML_LOG_TE("cmd_bootm");
if (bootm_start(cmdtp, flag, argc, argv))
return 1;
AML_LOG_TE("cmd_bootm");
/*
* We have reached the point of no return: we are going to
* overwrite all exception vector code, so we cannot easily
* recover from any failures any more...
*/
iflag = disable_interrupts();
#if defined(CONFIG_CMD_USB)
/*
* turn off USB to prevent the host controller from writing to the
* SDRAM while Linux is booting. This could happen (at least for OHCI
* controller), because the HCCA (Host Controller Communication Area)
* lies within the SDRAM and the host controller writes continously to
* this area (as busmaster!). The HccaFrameNumber is for example
* updated every 1 ms within the HCCA structure in SDRAM! For more
* details see the OpenHCI specification.
*/
usb_stop();
#endif
AML_LOG_TE("cmd_bootm");
ret = bootm_load_os(images.os, &load_end, 1);
AML_LOG_TE("cmd_bootm");
if (ret < 0) {
if (ret == BOOTM_ERR_RESET)
do_reset (cmdtp, flag, argc, argv);
if (ret == BOOTM_ERR_OVERLAP) {
if (images.legacy_hdr_valid) {
if (image_get_type (&images.legacy_hdr_os_copy) == IH_TYPE_MULTI)
puts ("WARNING: legacy format multi component "
"image overwritten\n");
} else {
puts ("ERROR: new format image overwritten - "
"must RESET the board to recover\n");
show_boot_progress (-113);
do_reset (cmdtp, flag, argc, argv);
}
}
if (ret == BOOTM_ERR_UNIMPLEMENTED) {
if (iflag)
enable_interrupts();
show_boot_progress (-7);
return 1;
}
}
AML_LOG_TE("cmd_bootm");
lmb_reserve(&images.lmb, images.os.load, (load_end - images.os.load));
AML_LOG_TE("cmd_bootm");
if (images.os.type == IH_TYPE_STANDALONE) {
if (iflag)
enable_interrupts();
/* This may return when 'autostart' is 'no' */
bootm_start_standalone(iflag, argc, argv);
return 0;
}
show_boot_progress (8);
#if defined(CONFIG_SILENT_CONSOLE) && \
(defined(CONFIG_SILENT_CONSOLE_LINUX_QUIET) || defined(CONFIG_DEPRECATED_SILENT_LINUX_CONSOLE))
if (images.os.os == IH_OS_LINUX)
fixup_silent_linux();
#endif
AML_LOG_TE("cmd_bootm");
#ifdef CONFIG_AUTO_SET_BOOTARGS_MEM
mem_size_arg_process();
#endif
boot_fn = boot_os[images.os.os];
if (boot_fn == NULL) {
if (iflag)
enable_interrupts();
printf ("ERROR: booting os '%s' (%d) is not supported\n",
genimg_get_os_name(images.os.os), images.os.os);
show_boot_progress (-8);
return 1;
}
AML_LOG_TE("cmd_bootm");
arch_preboot_os();
#ifdef TEST_UBOOT_BOOT_SPEND_TIME
{ int boot_kernel_start;
boot_kernel_start = get_utimer(0);
printf("bootm start to prepare boot kernel time:%dus\n",boot_kernel_start-bootm_start_time);
printf("from main_loop start to kernel decompress finished time:%dus\n",boot_kernel_start-main_loop_start);
}
#endif
ulong temp_img_addr;
AML_LOG_TE("cmd_bootm");
/* use fprintf to always show this print even if console is silenced with GD_FLG_SILENT */
fprintf(stderr, "uboot time: %d us.\n", get_utimer(0));
boot_fn(0, argc, argv, &images);
show_boot_progress (-9);
#ifdef DEBUG
puts ("\n## Control returned to monitor - resetting...\n");
#endif
do_reset (cmdtp, flag, argc, argv);
return 1;
}
