// The heart and core of StarCraft's unit search engine.
// Based on BWAPI's Shared/Templates.h
void UnitFinder::search(int left, int top, int right, int bottom) {
//0: No match, 1: Passed X iteration, 2: Passed Y iteration
//(Necessary because each UnitFinderData array has 2 entries per unit)
u8 unitSearchFlags[UNIT_ARRAY_LENGTH + 1] = { 0 };
int r = right, b = bottom;
const bool isWidthExtended = right - left - 1 < *MAX_UNIT_WIDTH;
const bool isHeightExtended = top - bottom - 1 < *MAX_UNIT_HEIGHT;
// Check if the location is smaller than the largest unit
if (isWidthExtended)
r += *MAX_UNIT_WIDTH;
if (isHeightExtended)
b += *MAX_UNIT_HEIGHT;
// Create UnitFinderData elements for compatibility with stl functions
UnitFinderData finderVal;
// Search for the values using built-in binary search algorithm and comparator
finderVal.position = left;
UnitFinderData *pLeft = std::lower_bound(getStartX(), getEndX(), finderVal);
finderVal.position = top;
UnitFinderData *pTop = std::lower_bound(getStartY(), getEndY(), finderVal);
finderVal.position = r;
UnitFinderData *pRight = std::lower_bound(pLeft, getEndX(), finderVal);
finderVal.position = b;
UnitFinderData *pBottom = std::lower_bound(pTop, getEndY(), finderVal);
// Iterate the Y entries of the finder
for (UnitFinderData *py = pTop; py < pBottom; ++py) {
if (unitSearchFlags[py->unitIndex] == 0) {
// If height is small, check unit bounds
if (!isHeightExtended
|| CUnit::getFromIndex(py->unitIndex)->getTop() < bottom)
unitSearchFlags[py->unitIndex] = 1;
}
}
// Iterate the X entries of the finder
this->unitCount = 0;
for (UnitFinderData *px = pLeft; px < pRight; ++px) {
if (unitSearchFlags[px->unitIndex] == 1) {
// If width is small, check unit bounds
if (!isWidthExtended
|| CUnit::getFromIndex(px->unitIndex)->getLeft() < right)
{
CUnit *unit = CUnit::getFromIndex(px->unitIndex);
if (unit)
this->units[this->unitCount++] = unit;
}
unitSearchFlags[px->unitIndex] = 0; //Prevent duplicates
}
}
}
/**
* Compares two areas with the == operator. Two uninitialized areas
* are equal to each other.
*
* @param otherArea This is the area we're comparing to, i.e. on
* the right hand side of the operator when used
* @return True if this area is the same as the given area
*/
bool Area3D::operator ==(const Area3D &otherArea) const {
return getStartX() == otherArea.getStartX() &&
getStartY() == otherArea.getStartY() &&
getStartZ() == otherArea.getStartZ() &&
getEndX() == otherArea.getEndX() &&
getEndY() == otherArea.getEndY() &&
getEndZ() == otherArea.getEndZ();
}
void CameraSystem::fixBoundaries()
{
auto stageSize = Constants::UI::stageSize;
if (getEndX() > stageSize.width)
{
_lookAtX -= getEndX() - stageSize.width;
}
else if (getStartX() < 0)
{
_lookAtX -= getStartX();
}
if (getEndY() > stageSize.height)
{
_lookAtY -= getEndY() - stageSize.height;
}
else if (getStartY() < 0)
{
_lookAtY -= getStartY();
}
}
void cMapCamera::centerAndJumpViewPortToCell(int cell) {
// fix any boundaries
if (cell < 0) cell = 0;
if (cell >= MAX_CELLS) cell = (MAX_CELLS-1);
int cellX = cellCalculator->getX(cell);
int cellY = cellCalculator->getY(cell);
// determine the half of our screen
int width = mapCamera->getViewportWidth();
int height = mapCamera->getViewportHeight();
// Half ...
int iHalfX = width/2;
int iHalfY = height/2;
// determine the new X and Y position
int newViewPortX = cellX - iHalfX;
int newViewPortY = cellY - iHalfY;
// now make sure the bottom right does not reach outside the map borders.
// first jump to the new coordinates
jumpTo(newViewPortX, newViewPortY);
int diffX = getEndX() - (game.map_width - 1);
int diffY = getEndY() - (game.map_height - 1);
// when > 0 then it has overlapped, and should be substracted to the original X
if (diffX > 0) {
newViewPortX -= diffX;
}
if (diffY > 0) {
newViewPortY -= diffY;
}
if (newViewPortX < 1) {
newViewPortX = 1;
}
if (newViewPortY < 1) {
newViewPortY = 1;
}
// now the final 'jump' to the correct positions
jumpTo(newViewPortX, newViewPortY);
}
/**
* Returns the intersection of this 3D area with another 3D area. If there is
* no intersection, an invalid 3D area will be returned.
*
* @param otherArea the area to intersect this 3D area with
* @return the 3D area that is the intersection
*/
Area3D Area3D::intersect(const Area3D &otherArea) const {
Area3D result;
// Check validity because of comparison operators.
if (isValid() && otherArea.isValid()) {
Displacement startX(std::max(getStartX(), otherArea.getStartX()));
Displacement startY(std::max(getStartY(), otherArea.getStartY()));
Displacement startZ(std::max(getStartZ(), otherArea.getStartZ()));
Displacement endX(std::min(getEndX(), otherArea.getEndX()));
Displacement endY(std::min(getEndY(), otherArea.getEndY()));
Displacement endZ(std::min(getEndZ(), otherArea.getEndZ()));
if (startX <= endX && startY <= endY && startZ <= endZ)
result = Area3D(startX, startY, startZ, endX, endY, endZ);
}
return result;
}
void cMapCamera::thinkInteraction() {
if (mouse_co_x1 > -1 && mouse_co_y1 > -1) {
return;
}
// thinking for map (scrolling that is)
if (mouse_x <= 1 || key[KEY_LEFT]) {
if (x > 1) {
x--;
mouse_tile = MOUSE_LEFT;
}
}
if (mouse_y <= 1 || key[KEY_UP]) {
if (y > 1) {
y--;
mouse_tile = MOUSE_UP;
}
}
if (mouse_x >= (game.screen_x-2) || key[KEY_RIGHT]) {
if ((getEndX()) < (game.map_width-1)) {
x++;
mouse_tile = MOUSE_RIGHT;
}
}
if (mouse_y >= (game.screen_y-2) || key[KEY_DOWN]) {
if ((getEndY()) < (game.map_height-1)) {
y++;
mouse_tile = MOUSE_DOWN;
}
}
}
/**
* Returns the width (in the X dimension) of the 3D area.
*/
Distance Area3D::getWidth() const {
return Distance(
(getEndX() - getStartX()).meters(),
Distance::Meters);
}
// doDraw
//--------------------------------------------------------------------------
void VehicleSelectionView::doDraw( Surface& dest )
{
Objective* obj = ObjectiveInterface::getObjective(CURRENT_SELECTED_OUTPOST_ID);
if ( !obj || obj->occupying_player != PlayerInterface::getLocalPlayer() )
{
// Desktop::setVisibilityNoDoAnything("VehicleSelectionView", false);
changeMade = false;
return;
}
char strBuf[256];
const int color = Color::white;
// Draw a line attaching the VehicleSelectionView to its outpost.
{if (WorldInputCmdProcessor::isObjectiveSelected())
{
// Draw a line connecting the vehicleSelectionView and the objective.
iRect gameViewRect;
WorldViewInterface::getViewWindow(&gameViewRect);
iXY objectivePos(WorldInputCmdProcessor::getSelectedObjectiveWorldPos());
objectivePos -= gameViewRect.getLocation();
iXY a(VehicleSelectionView::getLocation() + VehicleSelectionView::getSize() / 2);
iXY b(objectivePos);
// Calculate the starting point on the outside of the vehicleSelectionView box.
fXY v2oSlope(Math::unitDirection(a, b));
a.x += int(v2oSlope.x * float(VehicleSelectionView::getWidth() / 2));
a.y += int(v2oSlope.y * float(VehicleSelectionView::getHeight() / 2));
// Calculate the starting point on the outside of the objective box.
iXY objectiveOutlineSize(3, 3);
//fXY o2vSlope(Math::unitDirection(b, a));
//b.x += o2vSlope.x * float(objectiveOutlineSize.x);
//b.y += o2vSlope.y * float(objectiveOutlineSize.y);
//screen.drawLine(a, b, Color::white);
iRect r(objectivePos.x - objectiveOutlineSize.x,
objectivePos.y - objectiveOutlineSize.y,
objectiveOutlineSize.x,
objectiveOutlineSize.y);
screen->fillRect(r, Color::white);
//int xOffset = (strlen(WorldInputCmdProcessor::getSelectedObjectiveName()) * CHAR_XPIX) / 2;
//screen.bltStringShadowed(r.min.x - xOffset, r.min.y - 15, WorldInputCmdProcessor::getSelectedObjectiveName(), Color::white, Color::black);
iXY oos(objectiveOutlineSize);
iXY cpos;
if (v2oSlope.x > 0 && v2oSlope.y > 0) {
cpos = iXY(getEndX(), getEndY());
r = iRect(cpos.x - oos.x, cpos.y-oos.y, oos.x, oos.y);
}
if (v2oSlope.x > 0 && v2oSlope.y <= 0) {
cpos = iXY(getEndX(), getLocationY());
r = iRect(cpos.x - oos.x, cpos.y-oos.y, oos.x, oos.y);
}
if (v2oSlope.x <= 0 && v2oSlope.y > 0) {
cpos = iXY(getLocationX(), getEndY());
r = iRect(cpos.x - oos.x, cpos.y-oos.y, oos.x, oos.y);
}
if (v2oSlope.x <= 0 && v2oSlope.y <= 0) {
cpos = iXY(getLocationX(), getLocationY());
r = iRect(cpos.x - oos.x, cpos.y-oos.y, oos.x, oos.y);
}
//
screen->drawLine(cpos, b, Color::white);
screen->fillRect(r, Color::white);
//screen.bltLookup(r, Palette::darkGray256.getColorArray());
//screen.drawButtonBorder(r, Color::white, Color::gray96);
// Draw the name of the outpost.
}}
bltViewBackground(dest);
int remaining_time = 0;
int generation_time = 0;
if ( obj->unit_generation_on_flag )
{
remaining_time = obj->unit_generation_timer.getTimeLeft();
UnitProfile* profile = UnitProfileInterface::getUnitProfile(obj->unit_generation_type);
generation_time = profile->regen_time;
}
if (vsvUnitGenOn)
{
sprintf(strBuf, "%s", getUnitName(vsvSelectedUnit));
dest.bltString( productionUnitPos.x, productionUnitPos.y,
strBuf, color);
sprintf(strBuf, "%01d:%02d/%01d:%02d",
remaining_time / 60, remaining_time % 60,
generation_time / 60, generation_time % 60);
dest.bltString( timeRequiredPos.x, timeRequiredPos.y,
strBuf, color);
}
else
{
sprintf(strBuf, "%s", _("power off"));
dest.bltString( productionUnitPos.x, productionUnitPos.y,
strBuf, color);
dest.bltString( timeRequiredPos.x, timeRequiredPos.y,
strBuf, color);
}
int unitPerPlayer = GameConfig::game_maxunits / GameConfig::game_maxplayers;
sprintf(strBuf, "%d/%d", int(UnitInterface::getUnitCount(PlayerInterface::getLocalPlayerIndex())), unitPerPlayer);
dest.bltString(unitsBuiltPos.x, unitsBuiltPos.y, strBuf, color);
drawUnitProfileInfo(dest, iXY(0, unitProfileDataY), highlightedUnitType);
//sprintf(strBuf, "%01d:%02d", ( (int) outpost_status.unit_generation_time_remaining ) / 60, ( (int) outpost_status.unit_generation_time_remaining) % 60 );
//clientArea.bltString(timeRemainingPos, strBuf, color);
View::doDraw( dest );
} // end VehicleSelectionView::doDraw
/**
* Moves the frontmost Z position of the 3D area. This method will not change
* the depth of the 3D area.
*
* @param startZ the new frontmost Z position
*/
void Area3D::moveStartZ(const Displacement &startZ) {
setArea(getStartX(), getStartY(), startZ,
getEndX(), getEndY(), getEndZ() + (startZ - getStartZ()));
}
/**
* Changes the height of the 3D area.
*
* @param height the new height of the 3D area
*/
void Area3D::setHeight(const Distance &height) {
setArea(getStartX(), getStartY(), getStartZ(),
getEndX(), getStartY() + height, getEndZ());
}
// VehicleSelectionView
//---------------------------------------------------------------------------
VehicleSelectionView::VehicleSelectionView() : GameTemplateView()
{
setSearchName("VehicleSelectionView");
// setTitle(_("Unit Production"));
moveTo(iXY(0, 0));
const int yOffset = 16;
const int gapSpace = 1;
resizeClientArea(48 * 5 + gapSpace+1 * 4, 198 + 100 + 16);
// Power status.
iXY pos(0 ,2);
pos.x = 0;
add( new Label( pos.x+2, pos.y+2, _("Static Display"), Color::white) );
pos.x = getClientRect().getWidth() - 102;
if ( !buttonStaticDisplay )
buttonStaticDisplay = new Button();
buttonStaticDisplay->setLabel(_("On"));
buttonStaticDisplay->setLocation(pos.x, pos.y);
buttonStaticDisplay->setSize( 100, 14);
buttonStaticDisplay->setNormalBorder();
add(buttonStaticDisplay);
pos.y += yOffset+2;
pos.x = 0;
add( new Label( pos.x+2, pos.y+2, _("Power"), Color::white) );
pos.x = getClientRect().getWidth() - 102;
if ( !buttonPower )
buttonPower = new Button();
buttonPower->setLabel(_("Off"));
buttonPower->setLocation(pos.x,pos.y);
buttonPower->setSize( 100, 14);
buttonPower->setNormalBorder();
add(buttonPower);
pos.y += yOffset+5;
// XXX hardcoded for now
pos.x = 0;
add( new Label( pos.x+2, pos.y+2, _("Production"), Color::white) );
productionUnitPos.x = 130;
productionUnitPos.y = pos.y + 2;
pos.y += yOffset;
pos.x = 0;
add( new Label( pos.x+2, pos.y+2, _("Time"), Color::white) );
timeRequiredPos.x = productionUnitPos.x;
timeRequiredPos.y = pos.y + 2;
pos.y += yOffset;
pos.x = 0;
add( new Label( pos.x+2, pos.y+2, _("Unit Built"), Color::white) );
unitsBuiltPos.x = productionUnitPos.x;
unitsBuiltPos.y = pos.y + 2;
pos.y += yOffset;
pos.x = 0;
Surface tempSurface;
UnitProfile *uprofile;
UnitSelectionButton *usb;
if ( ! unitImages.empty() )
{
unitImages.deleteAll();
unitImages.clear();
}
for ( unsigned ut=0; ut < UnitProfileInterface::getNumUnitTypes(); ut++)
{
uprofile = UnitProfileInterface::getUnitProfile(ut);
Surface * s = new Surface();
s->loadPNG(uprofile->imagefile.c_str());
unitImages.push_back(s);
usb = new UnitSelectionButton(this, ut, pos.x, pos.y, *s);
add(usb);
pos.x += 48 + gapSpace;
if ( pos.x+48 > getEndX() )
{
pos.x = 0;
pos.y += 48 + gapSpace;
}
}
if ( pos.x == 0 )
{
pos.y += gapSpace * 3; // and the one just added before = 4
}
else
{
pos.y += 48 + gapSpace * 4;
pos.x = 0;
}
unitProfileDataY = pos.y;
pos.y += 73;
//addLabel(pos + 2, "Time Remaining:", Color::white);
//timeRemainingPos.x = (strlen("Time Remaining: ") + 1) * CHAR_XPIX + 2;
//timeRemainingPos.y = pos.y + 2;
//pos.y += yOffset;
pos.x = (getClientRect().getWidth() - 100) / 2;
if ( !buttonOk )
buttonOk = new Button();
buttonOk->setLabel(_("Close"));
buttonOk->setLocation(pos.x,pos.y);
buttonOk->setSize(100, 14);
buttonOk->setNormalBorder();
add(buttonOk);
maxHitPoints = 1;
maxAttackFactor = 1;
maxAttackRange = 1;
maxDefendRange = 1;
maxTotalSpeed = 1;
maxReloadTime = 1;
maxRegenTime = 1;
getProfileData();
highlightedUnitType = -1;
iRect r = getClientRect();
// statusBar = new BoxedLabel(r.getLocationX()+4, r.getEndY() - 32, r.getWidth() - 8, "XXX", Color::black, Color::gray192);
// add(statusBar);
} // end VehicleSelectionView::VehicleSelectionView
/**
* Changes the depth of the 3D area.
*
* @param depth the new depth of the 3D area
*/
void Area3D::setDepth(const Distance &depth) {
setArea(getStartX(), getStartY(), getStartZ(),
getEndX(), getEndY(), getStartZ() + depth);
}
float CameraSystem::getWidth() const
{
return getEndX() - getStartX();
}
/**
* Sets the bottommost Y position. This method may change the height of the
* 3D area.
*
* @param endY the new bottommost Y position
*/
void Area3D::setEndY(const Displacement &endY) {
setArea(getStartX(), getStartY(), getStartZ(),
getEndX(), endY, getEndZ());
}
/**
* Moves the leftmost X position of the 3D area. This method will not change
* the width of the 3D area.
*
* @param startX the new leftmost X position
*/
void Area3D::moveStartX(const Displacement &startX) {
setArea(startX, getStartY(), getStartZ(),
getEndX() + (startX - getStartX()), getEndY(), getEndZ());
}
/**
* Sets the Z dimension of the 3D area. This method may change the Z
* positions and the depth of the 3D area.
*
* @param startZ the new frontmost Z position
* @param depth the new depth of the 3D area
*/
void Area3D::setZDimension(const Displacement &startZ,
const Distance &depth) {
setArea(getStartX(), getStartY(), startZ,
getEndX(), getEndY(), startZ + depth);
}
/**
* Sets the Y dimension of the 3D area. This method may change the Y
* positions and the height of the 3D area.
*
* @param startY the new topmost Y position
* @param height the new height of the 3D area
*/
void Area3D::setYDimension(const Displacement &startY,
const Distance &height) {
setArea(getStartX(), startY, getStartZ(),
getEndX(), startY + height, getEndZ());
}
/**
* Moves the backmost Z position of the 3D area. This method will not
* change the depth of the 3D area.
*
* @param endZ the new backmost Z position
*/
void Area3D::moveEndZ(const Displacement &endZ) {
setArea(getStartX(), getStartY(), getStartZ() + (endZ - getEndZ()),
getEndX(), getEndY(), endZ);
}
