int main(int argc, char** argv)
{
if(argc < 2) // insuficient arguments
exit(1);
if(!open_input(argv[1])) // couldn't open input file
exit(1);
initMe();
yyparse();
initSemanticAnalyzer();
first_pass(root);
verify(root);
int eCount = getErrorCount();
if(eCount > 0)
{
fprintf(stderr,"%d semantic errors\n", eCount);
exit(3);
}
close_input();
exit(0);
}
void
UavcanNode::print_info()
{
if (!_instance) {
warnx("not running, start first");
}
(void)pthread_mutex_lock(&_node_mutex);
// Memory status
printf("Pool allocator status:\n");
printf("\tCapacity hard/soft: %u/%u blocks\n",
_pool_allocator.getBlockCapacityHardLimit(), _pool_allocator.getBlockCapacity());
printf("\tReserved: %u blocks\n", _pool_allocator.getNumReservedBlocks());
printf("\tAllocated: %u blocks\n", _pool_allocator.getNumAllocatedBlocks());
// UAVCAN node perfcounters
printf("UAVCAN node status:\n");
printf("\tInternal failures: %llu\n", _node.getInternalFailureCount());
printf("\tTransfer errors: %llu\n", _node.getDispatcher().getTransferPerfCounter().getErrorCount());
printf("\tRX transfers: %llu\n", _node.getDispatcher().getTransferPerfCounter().getRxTransferCount());
printf("\tTX transfers: %llu\n", _node.getDispatcher().getTransferPerfCounter().getTxTransferCount());
// CAN driver status
for (unsigned i = 0; i < _node.getDispatcher().getCanIOManager().getCanDriver().getNumIfaces(); i++) {
printf("CAN%u status:\n", unsigned(i + 1));
auto iface = _node.getDispatcher().getCanIOManager().getCanDriver().getIface(i);
printf("\tHW errors: %llu\n", iface->getErrorCount());
auto iface_perf_cnt = _node.getDispatcher().getCanIOManager().getIfacePerfCounters(i);
printf("\tIO errors: %llu\n", iface_perf_cnt.errors);
printf("\tRX frames: %llu\n", iface_perf_cnt.frames_rx);
printf("\tTX frames: %llu\n", iface_perf_cnt.frames_tx);
}
// ESC mixer status
printf("ESC actuators control groups: sub: %u / req: %u / fds: %u\n",
(unsigned)_groups_subscribed, (unsigned)_groups_required, _poll_fds_num);
printf("ESC mixer: %s\n", (_mixers == nullptr) ? "NONE" : "OK");
if (_outputs.noutputs != 0) {
printf("ESC output: ");
for (uint8_t i = 0; i < _outputs.noutputs; i++) {
printf("%d ", (int)(_outputs.output[i] * 1000));
}
printf("\n");
// ESC status
int esc_sub = orb_subscribe(ORB_ID(esc_status));
struct esc_status_s esc;
memset(&esc, 0, sizeof(esc));
orb_copy(ORB_ID(esc_status), esc_sub, &esc);
printf("ESC Status:\n");
printf("Addr\tV\tA\tTemp\tSetpt\tRPM\tErr\n");
for (uint8_t i = 0; i < _outputs.noutputs; i++) {
printf("%d\t", esc.esc[i].esc_address);
printf("%3.2f\t", (double)esc.esc[i].esc_voltage);
printf("%3.2f\t", (double)esc.esc[i].esc_current);
printf("%3.2f\t", (double)esc.esc[i].esc_temperature);
printf("%3.2f\t", (double)esc.esc[i].esc_setpoint);
printf("%d\t", esc.esc[i].esc_rpm);
printf("%d", esc.esc[i].esc_errorcount);
printf("\n");
}
orb_unsubscribe(esc_sub);
}
// Sensor bridges
auto br = _sensor_bridges.getHead();
while (br != nullptr) {
printf("Sensor '%s':\n", br->get_name());
br->print_status();
printf("\n");
br = br->getSibling();
}
(void)pthread_mutex_unlock(&_node_mutex);
}
int SetColorSpecimen::rate()
{
return getErrorCount();
}
void
UavcanNode::print_info()
{
if (!_instance) {
warnx("not running, start first");
}
(void)pthread_mutex_lock(&_node_mutex);
// Memory status
printf("Pool allocator status:\n");
printf("\tCapacity hard/soft: %u/%u blocks\n",
_pool_allocator.getBlockCapacityHardLimit(), _pool_allocator.getBlockCapacity());
printf("\tReserved: %u blocks\n", _pool_allocator.getNumReservedBlocks());
printf("\tAllocated: %u blocks\n", _pool_allocator.getNumAllocatedBlocks());
// UAVCAN node perfcounters
printf("UAVCAN node status:\n");
printf("\tInternal failures: %llu\n", _node.getInternalFailureCount());
printf("\tTransfer errors: %llu\n", _node.getDispatcher().getTransferPerfCounter().getErrorCount());
printf("\tRX transfers: %llu\n", _node.getDispatcher().getTransferPerfCounter().getRxTransferCount());
printf("\tTX transfers: %llu\n", _node.getDispatcher().getTransferPerfCounter().getTxTransferCount());
// CAN driver status
for (unsigned i = 0; i < _node.getDispatcher().getCanIOManager().getCanDriver().getNumIfaces(); i++) {
printf("CAN%u status:\n", unsigned(i + 1));
auto iface = _node.getDispatcher().getCanIOManager().getCanDriver().getIface(i);
printf("\tHW errors: %llu\n", iface->getErrorCount());
auto iface_perf_cnt = _node.getDispatcher().getCanIOManager().getIfacePerfCounters(i);
printf("\tIO errors: %llu\n", iface_perf_cnt.errors);
printf("\tRX frames: %llu\n", iface_perf_cnt.frames_rx);
printf("\tTX frames: %llu\n", iface_perf_cnt.frames_tx);
}
// ESC mixer status
printf("ESC actuators control groups: sub: %u / req: %u / fds: %u\n",
(unsigned)_groups_subscribed, (unsigned)_groups_required, _poll_fds_num);
printf("ESC mixer: %s\n", (_mixers == nullptr) ? "NONE" : "OK");
if (_outputs.noutputs != 0) {
printf("ESC output: ");
for (uint8_t i = 0; i < _outputs.noutputs; i++) {
printf("%d ", (int)(_outputs.output[i] * 1000));
}
printf("\n");
// ESC status
int esc_sub = orb_subscribe(ORB_ID(esc_status));
struct esc_status_s esc;
memset(&esc, 0, sizeof(esc));
orb_copy(ORB_ID(esc_status), esc_sub, &esc);
printf("ESC Status:\n");
printf("Addr\tV\tA\tTemp\tSetpt\tRPM\tErr\n");
for (uint8_t i = 0; i < _outputs.noutputs; i++) {
const float temp_celsius = (esc.esc[i].esc_temperature > 0) ?
(esc.esc[i].esc_temperature - 273.15F) : 0.0F;
printf("%d\t", esc.esc[i].esc_address);
printf("%3.2f\t", (double)esc.esc[i].esc_voltage);
printf("%3.2f\t", (double)esc.esc[i].esc_current);
printf("%3.2f\t", (double)temp_celsius);
printf("%3.2f\t", (double)esc.esc[i].esc_setpoint);
printf("%d\t", esc.esc[i].esc_rpm);
printf("%d", esc.esc[i].esc_errorcount);
printf("\n");
}
orb_unsubscribe(esc_sub);
}
// Sensor bridges
auto br = _sensor_bridges.getHead();
while (br != nullptr) {
printf("Sensor '%s':\n", br->get_name());
br->print_status();
printf("\n");
br = br->getSibling();
}
// Printing all nodes that are online
std::printf("Online nodes (Node ID, Health, Mode):\n");
_node_status_monitor.forEachNode([](uavcan::NodeID nid, uavcan::NodeStatusMonitor::NodeStatus ns) {
static constexpr const char* HEALTH[] = {
"OK", "WARN", "ERR", "CRIT"
};
static constexpr const char* MODES[] = {
"OPERAT", "INIT", "MAINT", "SW_UPD", "?", "?", "?", "OFFLN"
};
std::printf("\t% 3d %-10s %-10s\n", int(nid.get()), HEALTH[ns.health], MODES[ns.mode]);
});
(void)pthread_mutex_unlock(&_node_mutex);
}
