void Mcfx_convolverAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
// std::cout << "in: " << getNumInputChannels() << " out: " << getNumOutputChannels() << std::endl;
if (_configLoaded)
{
_isProcessing = true;
#ifdef USE_ZITA_CONVOLVER
for (int i=0; i < jmin(conv_data.getNumInputChannels(), getNumInputChannels()) ; i++)
{
float* indata = zita_conv.inpdata(i)+_ConvBufferPos;
memcpy(indata, buffer.getReadPointer(i), getBlockSize()*sizeof(float));
}
_ConvBufferPos += getBlockSize();
if (_ConvBufferPos >= _ConvBufferSize) {
zita_conv.process(THREAD_SYNC_MODE);
_ConvBufferPos = 0;
}
for (int i=0; i < jmin(conv_data.getNumOutputChannels(), getNumOutputChannels()) ; i++)
{
float* outdata = zita_conv.outdata(i)+_ConvBufferPos;
memcpy(buffer.getWritePointer(i), outdata, getBlockSize()*sizeof(float));
}
#else
mtxconv_.processBlock(buffer, buffer);
#endif
_isProcessing = false;
} else { // config loaded
// clear output in case no config is loaded!
buffer.clear();
}
}
void DetunerPlugin::processBlock (AudioSampleBuffer& buffer,
MidiBuffer& midiMessages)
{
int blockSamples = buffer.getNumSamples();
detune(inputBuffer, outputBuffer, blockSamples);
setMagnus(outputBuffer->getMagnitude(0, buffer.getNumSamples()));
// in case we have more outputs than inputs, we'll clear any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
{
buffer.clear (i, 0, buffer.getNumSamples());
}
// if any midi messages come in, use them to update the keyboard state object. This
// object sends notification to the UI component about key up/down changes
keyboardState.processNextMidiBuffer (midiMessages,
0, buffer.getNumSamples(),
true);
// have a go at getting the current time from the host, and if it's changed, tell
// our UI to update itself.
AudioPlayHead::CurrentPositionInfo pos;
if (getPlayHead() != 0 && getPlayHead()->getCurrentPosition (pos))
{
if (memcmp (&pos, &lastPosInfo, sizeof (pos)) != 0)
{
lastPosInfo = pos;
sendChangeMessage (this);
}
}
else
{
zeromem (&lastPosInfo, sizeof (lastPosInfo));
lastPosInfo.timeSigNumerator = 4;
lastPosInfo.timeSigDenominator = 4;
lastPosInfo.bpm = 120;
}
}
void BlankenhainAudioProcessor::initializing(AudioSampleBuffer& buffer)
{
//For Metering, reset "current" Values
for (unsigned int i = 0; i < meterValues.size(); i++)
{
meterValues[i] = 0.f;
}
//Set lastKnownSampleRate and lastKnownBlockSize
this->setLastKnownSampleRate(this->getSampleRate());
this->setLastKnownBlockSize(this->getBlockSize());
// In case we have more outputs than inputs, this code clears any output
// channels that didn't contain input data.
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i) {
buffer.clear(i, 0, buffer.getNumSamples());
}
}
void Ambix_rotator_zAudioProcessor::prepareToPlay (double sampleRate, int samplesPerBlock)
{
// Use this method as the place to do any pre-playback
// initialisation that you need..
// resize buffer if necessary
output_buffer.setSize((std::max)(getNumOutputChannels(), getNumInputChannels()), samplesPerBlock);
/*
int l=0;
int m=0;
for (int i=0; i <= 25; i++)
{
ACNtoLM(i, l, m);
std::cout << "ACN: " << i << " l: " << l << " m: " << m << std::endl;
}
*/
}
void processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
const int numSamples = buffer.getNumSamples();
if (initialised && plugin != nullptr && handle != nullptr)
{
for (int i = 0; i < inputs.size(); ++i)
plugin->connect_port (handle, inputs[i],
i < buffer.getNumChannels() ? buffer.getWritePointer (i) : nullptr);
if (plugin->run != nullptr)
{
for (int i = 0; i < outputs.size(); ++i)
plugin->connect_port (handle, outputs.getUnchecked(i),
i < buffer.getNumChannels() ? buffer.getWritePointer (i) : nullptr);
plugin->run (handle, numSamples);
return;
}
if (plugin->run_adding != nullptr)
{
tempBuffer.setSize (outputs.size(), numSamples);
tempBuffer.clear();
for (int i = 0; i < outputs.size(); ++i)
plugin->connect_port (handle, outputs.getUnchecked(i), tempBuffer.getWritePointer (i));
plugin->run_adding (handle, numSamples);
for (int i = 0; i < outputs.size(); ++i)
if (i < buffer.getNumChannels())
buffer.copyFrom (i, 0, tempBuffer, i, 0, numSamples);
return;
}
jassertfalse; // no callback to use?
}
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
buffer.clear (i, 0, numSamples);
}
void DemoJuceFilter::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
assert(mpDSP->getNumInputs()<= buffer.getNumChannels());
assert(mpDSP->getNumOutputs()<= buffer.getNumChannels());
if(mpDSP && mpDSP->getNumInputs()<= buffer.getNumChannels()
&& mpDSP->getNumOutputs() <= buffer.getNumChannels() )
{
mpDSP->compute(buffer.getNumSamples(),
buffer.getArrayOfChannels(),
buffer.getArrayOfChannels());
}
// in case we have more outputs than inputs, we'll clear any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
{
buffer.clear (i, 0, buffer.getNumSamples());
}
}
void HoaToolsAudioProcessor::processBlock(AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
int i;
int numins = getNumInputChannels();
int numouts = getNumOutputChannels();
int nharmo = NHARMO;
int vectorsize = buffer.getNumSamples();
for(i = 0; i < numins; i++)
{
cblas_scopy(vectorsize, buffer.getReadPointer(i), 1, m_input_vector+i, numins);
m_lines->setRadius(i, m_sources->sourceGetRadius(i));
m_lines->setAzimuth(i, m_sources->sourceGetAzimuth(i));
if(m_sources->sourceGetExistence(i))
m_map->setMute(i, 0);
else
m_map->setMute(i, 1);
}
for(; i < 16; i++)
{
m_map->setMute(i, 1);
}
for(i = 0; i < vectorsize; i++)
{
m_lines->process(m_lines_vector);
for(int j = 0; j < numins; j++)
m_map->setRadius(j, m_lines_vector[j]);
for(int j = 0; j < numins; j++)
m_map->setAzimuth(j, m_lines_vector[j+numins]);
m_map->process(m_input_vector+ numins * i, m_harmo_vector + nharmo * i);
m_optim->process(m_harmo_vector + nharmo * i, m_harmo_vector + nharmo * i);
m_decoder->process(m_harmo_vector + nharmo * i, m_output_vector + numouts * i);
m_meter->process(m_output_vector + numouts * i);
}
for(i = 0; i < numouts; i++)
{
cblas_scopy(vectorsize, m_output_vector+i, numouts, buffer.getWritePointer(i), 1);
}
}
void StereoChorusAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
if (getNumInputChannels() == 1) buffer.copyFrom(1, 0, buffer, 0, 0, buffer.getNumSamples());
//float* channelData = buffer.getSampleData (0);
for (int i = 0; i < buffer.getNumSamples(); i++) {
float leftMod = (leftOsc.nextSample()+1.01) * getParameter(modParam) * 100;
float rightMod = (leftOsc.nextSample()+1.01) * getParameter(modParam) * 100;
leftDelayTime = (getParameter(delayParam) * 200) + leftMod + .002;
rightDelayTime = (getParameter(delayParam) * 220) + rightMod + .0015;
float l_xn = buffer.getReadPointer(0)[i];
float r_xn = buffer.getReadPointer(1)[i];
float l_combined;
float r_combined;
float l_yn;
float r_yn;
l_yn = leftBuffer.getSample(leftDelayTime);
r_yn = rightBuffer.getSample(rightDelayTime);
l_combined = l_xn + r_yn * getParameter(feedbackParam);
r_combined = r_xn + l_yn * getParameter(feedbackParam);
leftBuffer.addSample(l_combined);
rightBuffer.addSample(r_combined);
buffer.getWritePointer(0)[i] = (l_xn * (1-getParameter(mixParam)) + l_yn * getParameter(mixParam));
buffer.getWritePointer(1)[i] = (r_xn * (1-getParameter(mixParam)) + r_yn * getParameter(mixParam));
}
}
void Ambix_vmicAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
_Sh_transf = Sh_transf; // buffer old values
calcParams(); // calc new transformation matrix
int NumSamples = buffer.getNumSamples();
output_buffer.setSize(buffer.getNumChannels(), NumSamples);
output_buffer.clear();
for (int out = 0; out < std::min(NUM_FILTERS_VMIC,getNumOutputChannels()); out++)
{
for (int in = 0; in < std::min(AMBI_CHANNELS,getNumInputChannels()); in++)
{
if (_Sh_transf(out, in) != 0.f || Sh_transf(out, in) != 0.f)
{
if (_Sh_transf(out, in) == Sh_transf(out, in))
{
output_buffer.addFrom(out, 0, buffer, in, 0, NumSamples, (float)Sh_transf(out, in));
} else {
output_buffer.addFromWithRamp(out, 0, buffer.getReadPointer(in), NumSamples, (float)_Sh_transf(out, in), (float)Sh_transf(out, in));
}
}
}
}
// clear unused channels
for (int out = std::min(NUM_FILTERS_VMIC,getNumOutputChannels()); out < output_buffer.getNumChannels(); out++)
{
output_buffer.clear(out, 0, NumSamples);
}
buffer = output_buffer;
}
void LyrebirdAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
// Do Midi things
buffer.clear();
int time;
MidiMessage m;
for (MidiBuffer::Iterator i (midiMessages); i.getNextEvent (m, time);)
{
sawGenerator->setWavelength(currentSampleRate, m.getMidiNoteInHertz(m.getNoteNumber()));
if (m.isNoteOff())
{
sawGenerator->setWavelength(currentSampleRate, 0);
}
}
// In case we have more outputs than inputs, this code clears any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
// I've added this to avoid people getting screaming feedback
// when they first compile the plugin, but obviously you don't need to
// this code if your algorithm already fills all the output channels.
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
buffer.clear (i, 0, buffer.getNumSamples());
float* leftData = buffer.getWritePointer (0);
float* rightData = buffer.getWritePointer(1);
for (int sample = 0; sample < buffer.getNumSamples(); sample++)
{
leftData[sample] = sawGenerator->getCurrentAmplitude();
rightData[sample] = sawGenerator->getCurrentAmplitude();
sawGenerator->incrementSaw();
}
}
/*
This method is where user chosen values are applied to the audio buffer.
If the track is not muted then gain is applied to both the left and right channels
based on both the current gain value as well as taking into consideration the current
panning value.
@param &buffer the buffer to be processed
*/
void ChannelStripProcessor::processBlock(AudioSampleBuffer& buffer, MidiBuffer&)
{
//Check to see if the track is un-muted
if (!_muted)
{
//Apply the gain value to the left channel relative to the panning value
//buffer.applyGain(0, 0, buffer.getNumSamples(), _gain*(0));
float leftGain_ = _gain *(1.0f - _panning);
float rightGain_ = _gain *(1.0f - _panning);
buffer.applyGain(0, 0, buffer.getNumSamples(), _gain*(1.0f - _panning));
//Apply the gain value to the right channel relative to the panning value
//buffer.applyGain(1, 0, buffer.getNumSamples(), 0);
buffer.applyGain(1, 0, buffer.getNumSamples(), _gain*_panning);
}
//Check to see if the track is muted
if (_muted)
{
//Apply a gain value of 0 to the track
buffer.applyGain(_muteGain);
}
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
buffer.clear(i, 0, buffer.getNumSamples());
}
//==============================================================================
void DRowAudioFilter::prepareToPlay (double sampleRate, int samplesPerBlock)
{
currentSampleRate = sampleRate;
oneOverCurrentSampleRate = 1.0f/currentSampleRate;
// set up wave buffer and fill with triangle data
iLookupTableSize = 8192;
iLookupTableSizeMask = iLookupTableSize-1;
pfLookupTable = new float[iLookupTableSize];
float fPhaseStep = (2 * double_Pi) / iLookupTableSize;
for(int i = 0; i < iLookupTableSize; i++) {
if(i < iLookupTableSize * 0.5)
pfLookupTable[i] = -1.0f + (2.0/double_Pi)*i*fPhaseStep;
else
pfLookupTable[i] = 3.0f - (2.0/double_Pi)*i*fPhaseStep;
}
iLookupTablePos = 0;
iSamplesProcessed = 0;
// set up circular buffers
iBufferSize = (int)sampleRate;
pfCircularBufferL = new float[iBufferSize];
for (int i = 0; i < iBufferSize; i++)
pfCircularBufferL[i] = 0;
if (getNumInputChannels() == 2) {
pfCircularBufferR = new float[iBufferSize];
for (int i = 0; i < iBufferSize; i++)
pfCircularBufferR[i] = 0;
}
iBufferWritePos = 0;
updateFilters();
}
void MiditoOscAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
static float cv[8], shiftcv[8];
static bool _calibMode;
MidiBuffer processedMidi;
MidiMessage m;
int time;
char oscBuffer[IP_MTU_SIZE];
osc::OutboundPacketStream p(oscBuffer, IP_MTU_SIZE);
if (calibMode) // Calibration Mode A440Hz(MIDI number 69)
{
p << osc::BeginBundleImmediate
<< osc::BeginMessage( "/fader1" )
<< calibMap[69] << osc::EndMessage
<< osc::BeginMessage( "/fader2" )
<< calibMap[69] << osc::EndMessage
<< osc::BeginMessage( "/fader3" )
<< calibMap[69] << osc::EndMessage
<< osc::BeginMessage( "/fader4" )
<< calibMap[69] << osc::EndMessage
<< osc::BeginMessage( "/fader5" )
<< calibMap[69] << osc::EndMessage
<< osc::BeginMessage( "/fader6" )
<< calibMap[69] << osc::EndMessage
<< osc::BeginMessage( "/fader7" )
<< calibMap[69] << osc::EndMessage
<< osc::BeginMessage( "/fader8" )
<< calibMap[69] << osc::EndMessage
<< osc::BeginMessage( "/gate1" )
<< 1 << osc::EndMessage
<< osc::BeginMessage( "/gate2" )
<< 1 << osc::EndMessage
<< osc::EndBundle;
sendOSCData(p);
_calibMode = true;
return;
} else {
if (_calibMode)
{
p << osc::BeginBundleImmediate
<< osc::BeginMessage( "/gate1" )
<< 0 << osc::EndMessage
<< osc::BeginMessage( "/gate2" )
<< 0 << osc::EndMessage
<< osc::EndBundle;
sendOSCData(p);
_calibMode = false;
}
}
for (MidiBuffer::Iterator i (midiMessages); i.getNextEvent (m, time);)
{
p.Clear();
usleep(30);
if (m.isNoteOn())
{
if (monoMode) // mono Mode
{
uint32_t midiCh = m.getChannel();
if (midiCh == 0 || midiCh > 7)
{
midiCh = 1;
}
cv[midiCh - 1] = calibMap[m.getNoteNumber()];
switch (midiCh)
{
case 1:
p << osc::BeginMessage("/fader1")
<< cv[0] << osc::EndMessage;
break;
case 2:
p << osc::BeginMessage("/fader2")
<< cv[1] << osc::EndMessage;
break;
case 3:
p << osc::BeginMessage("/fader3")
<< cv[2] << osc::EndMessage;
break;
case 4:
p << osc::BeginMessage("/fader4")
<< cv[3] << osc::EndMessage;
break;
case 5:
p << osc::BeginMessage("/fader5")
<< cv[4] << osc::EndMessage;
break;
case 6:
p << osc::BeginMessage("/fader6")
<< cv[5] << osc::EndMessage;
break;
case 7:
p << osc::BeginMessage("/fader7")
<< cv[6] << osc::EndMessage;
break;
case 8:
p << osc::BeginMessage("/fader8")
<< cv[7] << osc::EndMessage;
break;
default:
break;
}
sendOSCData(p);
} else if (shiftMode) { // shift Mode
cv[0] = calibMap[m.getNoteNumber()];
for (int i = 7; i > 0; i--)
{
shiftcv[i] = shiftcv[i-1];
}
p << osc::BeginBundleImmediate
<< osc::BeginMessage( "/fader1" )
<< cv[0] << osc::EndMessage
<< osc::BeginMessage( "/fader2" )
<< shiftcv[1] << osc::EndMessage
<< osc::BeginMessage( "/fader3" )
<< shiftcv[2] << osc::EndMessage
<< osc::BeginMessage( "/fader4" )
<< shiftcv[3] << osc::EndMessage
<< osc::BeginMessage( "/fader5" )
<< shiftcv[4] << osc::EndMessage
<< osc::BeginMessage( "/fader6" )
<< shiftcv[5] << osc::EndMessage
<< osc::BeginMessage( "/fader7" )
<< shiftcv[6] << osc::EndMessage
<< osc::BeginMessage( "/fader8" )
<< shiftcv[7] << osc::EndMessage
<< osc::BeginMessage( "/gate1" )
<< 1 << osc::EndMessage
<< osc::BeginMessage( "/gate2" )
<< 1 << osc::EndMessage
<< osc::EndBundle;
sendOSCData(p);
shiftcv[0] = cv[0];
} else { // poly Mode
cv[ch] = calibMap[m.getNoteNumber()];
if (currentMaxPoly == 1)
{
cv[1] = cv[0];
}
p << osc::BeginBundleImmediate
<< osc::BeginMessage( "/fader1" )
<< cv[0] << osc::EndMessage
<< osc::BeginMessage( "/fader2" )
<< cv[1] << osc::EndMessage
<< osc::BeginMessage( "/fader3" )
<< cv[2] << osc::EndMessage
<< osc::BeginMessage( "/fader4" )
<< cv[3] << osc::EndMessage
<< osc::BeginMessage( "/fader5" )
<< cv[4] << osc::EndMessage
<< osc::BeginMessage( "/fader6" )
<< cv[5] << osc::EndMessage
<< osc::BeginMessage( "/fader7" )
<< m.getFloatVelocity() << osc::EndMessage
<< osc::BeginMessage( "/gate1" )
<< 1 << osc::EndMessage
<< osc::BeginMessage( "/gate2" )
<< 1 << osc::EndMessage
<< osc::EndBundle;
sendOSCData(p);
ch++;
gateCount++;
if (ch >= currentMaxPoly)
{
ch = 0;
}
}
} else if (m.isNoteOff()) {
if (monoMode)
{
switch (m.getChannel())
{
case 1:
p << osc::BeginMessage( "/gate1" )
<< 0 << osc::EndMessage;
break;
case 2:
p << osc::BeginMessage( "/gate2" )
<< 0 << osc::EndMessage;
break;
case 3:
p << osc::BeginMessage( "/gate3" )
<< 0 << osc::EndMessage;
break;
case 4:
p << osc::BeginMessage( "/gate4" )
<< 0 << osc::EndMessage;
break;
default:
break;
}
sendOSCData(p);
} else if (shiftMode) {
p << osc::BeginBundleImmediate
<< osc::BeginMessage( "/gate1" )
<< 0 << osc::EndMessage
<< osc::BeginMessage( "/gate2" )
<< 0 << osc::EndMessage
<< osc::EndBundle;
sendOSCData(p);
} else {
gateCount --;
if (gateCount <= 0)
{
p << osc::BeginBundleImmediate
<< osc::BeginMessage( "/gate1" )
<< 0 << osc::EndMessage
<< osc::BeginMessage( "/gate2" )
<< 0 << osc::EndMessage
<< osc::EndBundle;
sendOSCData(p);
gateCount = 0;
}
ch--;
if (ch == -1)
{
ch = 0;
}
}
} else if (m.isControllerOfType(1)) { // Modulation Wheel
float modulation = m.getControllerValue();
if (!monoMode && !shiftMode)
{
p << osc::BeginMessage("/fader8")
<< (modulation / 127) << osc::EndMessage;
sendOSCData(p);
}
}
processedMidi.addEvent (m, time);
}
midiMessages.swapWith (processedMidi);
buffer.clear();
for (int channel = 0; channel < getNumInputChannels(); ++channel)
{
float* channelData = 0;
}
}
void vstSynthAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
// number of samples in current buffer
const int numSamples = buffer.getNumSamples();
/*
Checks to see if delay size has changed since the last block. If it has,
the delay buffer is resized and cleared (to prevent garbage in the output)
The read and write pointers are also reset to their starting positions and
the saved filter states are removed to reduce transients.
*/
// delayTimeParam controlled by vstSynthEditor::delayTimeSlider
if (delayBuffer.getNumSamples() != getParameter(delayTimeParam) + numSamples)
{
delayBuffer.setSize(1, getParameter(delayTimeParam) + numSamples);
delayBuffer.clear();
delayWritePtr = delayBuffer.getSampleData(0) + (int) getParameter(delayTimeParam);
delayReadPtr = delayBuffer.getSampleData(0);
//hpeqFilter.reset();
}
// Receives MIDI data from host
keyboardState.processNextMidiBuffer(midiMessages, 0, numSamples, true);
// Call to vstSynthVoice::renderNextBlock where buffer is filled with raw oscillator data
vstSynth.renderNextBlock(buffer, midiMessages, 0, numSamples);
// Pointer to beginning of buffer
float* bufferPtr = buffer.getSampleData(0, 0);
// Performs tremolo (AM) if enabled, overdrive and delay operation
for (int currentSample = 0; currentSample < numSamples; currentSample++)
{
// Apply tremolo if enabled
if (getParameter(lfoDestParam) == 2) // Controlled by vstSynthEditor::lfoDestComboBox
{
tremolo.setVibratoRate(getParameter(lfoFreqParam)); // Controlled by vstSynthEditor::lfoFreqSlider
tremolo.setVibratoGain(getParameter(lfoDevParam)/10); // Controlled by vstSynthEditor::lfoDevSlider
*bufferPtr *= (float) (1+tremolo.tick()); // Modulate amplitude with tremolo output
}
// Push signal through tahn to introduce nonlinear distortion
*bufferPtr = tanhf(getParameter(driveParam) * *bufferPtr); // Controlled by vstSynthEditor::driveSlider
// Process delay if enabled
if (getParameter(delayTimeParam) > 0) // Controlled by vstSynthEditor::delayTimeSlider
{
// Add existing delay data into buffer
*bufferPtr += getParameter(delayFeedbackParam) * *delayReadPtr; // Controlled by vstSynthEditor::delayFBSlider
// Save current output data into delay buffer
*delayWritePtr = *bufferPtr;
// Increment pointers
delayWritePtr++;
delayReadPtr++;
// Circular buffer implementation: reset pointers to beginning of buffers when end is reached
if (delayReadPtr > delayBuffer.getSampleData(0) + delayBuffer.getNumSamples())
{
delayReadPtr = delayBuffer.getSampleData(0);
}
if (delayWritePtr > delayBuffer.getSampleData(0) + delayBuffer.getNumSamples())
{
delayWritePtr = delayBuffer.getSampleData(0);
}
}
// Increment pointer
bufferPtr++;
}
// Send buffer to vstSynthFilter where it is replaced with filtered data
hpeqFilter.processSamples(buffer.getSampleData(0, 0), numSamples);
// All processing happens in only one channel for speed; the other channel is filled here.
buffer.addFrom(1, 0, buffer, 0, 0, numSamples);
// Apply overall output gain to buffer before playback
buffer.applyGain(0, numSamples, 10 * getParameter(outputGainParam)); // Controlled by vstSynthEditor::outputGainSlider
// In case we have more outputs than inputs, we'll clear any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
{
buffer.clear (i, 0, buffer.getNumSamples());
}
}
void ChorusAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
// In case we have more outputs than inputs, this code clears any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
// I've added this to avoid people getting screaming feedback
// when they first compile the plugin, but obviously you don't need to
// this code if your algorithm already fills all the output channels.
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
buffer.clear (i, 0, buffer.getNumSamples());
// If the sample rate has changed resize the buffers
if (FS != getSampleRate())resizeBuffers(depthOSC, delayOSC, delayBufferL, delayBufferR);
// If the modulation rate or the depth have been changed recreate LFO
if (freq != modRate || Amp != depth)LFOBuffer();
// get current write pointers
depthOSCwp = depthOSC.getWritePointer(0);
delayOSCwp = delayOSC.getWritePointer(0);
delayBufferLwp = delayBufferL.getWritePointer(0);
delayBufferRwp = delayBufferR.getWritePointer(0);
// get current read pointers
depthOSCrp = depthOSC.getReadPointer(0);
delayOSCrp = delayOSC.getReadPointer(0);
delayBufferLrp = delayBufferL.getReadPointer(0);
delayBufferRrp = delayBufferR.getReadPointer(0);
// Calculate delay in samples
int delay = (int)(delayTime*FS);
// create input and output channels to read from and write to
const float *inL = buffer.getReadPointer(0);
const float *inR = buffer.getReadPointer(1);
float *outL = {};
outL = buffer.getWritePointer(0);
float *outR = {};
outR = buffer.getWritePointer(1);
// Step through each sample in the current buffer
for (int i = 0; i < buffer.getNumSamples(); i++)
{
// Calculate the delay point, and write to delay buffer
double dSamp = i + bidx - delay;
// Current sample for the delay buffer
int ridx = i + bidx;
// Wrap ridx if it is larger than the size of the delay buffer (equal to the sample rate)
if (ridx >= FS)ridx -= FS;
// Calculate delay after modulation has been applied
double modDelay = (delay * 0.3 * depthOSCrp[ridx]);
double dSampMod = dSamp - modDelay;
// If the delay time exceeds or is under the buffer length wrap around
if ((int)dSampMod < 0)dSampMod += FS;
if ((int)dSampMod >= FS)dSampMod -= FS;
double delaySampleL = 0;
double delaySampleR = 0;
// write current input data to delayBuffer
delayBufferRwp[ridx] = inR[i];
delayBufferLwp[ridx] = inL[i];
// Check whether the delay is fractional
double dSampModround = round(dSampMod);
double check = dSampMod - dSampModround;
int inc = 0;
// If the fractional content of the delay is > 0 then interpolate against the next sample
// If the fractional ocntent of the delay is < 0 then interpolate against the previous sample
// Else take the current sample without interpolation
if (check > 0)
{
inc = (int)dSampModround+1;
if (inc >= FS)
{
delaySampleL = interpolateLinear(delayBufferLrp[int(dSampMod)], delayBufferLrp[inc-FS], dSampMod, round(dSampMod));
delaySampleR = interpolateLinear(delayBufferRrp[int(dSampMod)], delayBufferRrp[inc - FS], dSampMod, round(dSampMod));
}
else
{
delaySampleL = interpolateLinear(delayBufferLrp[int(dSampMod)], delayBufferLrp[inc], dSampMod, round(dSampMod));
delaySampleR = interpolateLinear(delayBufferRrp[int(dSampMod)], delayBufferRrp[inc], dSampMod, round(dSampMod));
}
}
else if (check < 0)
{
inc = (int)dSampModround-1;
if (inc < 0)
{
delaySampleL = interpolateLinear(delayBufferLrp[inc + FS], delayBufferLrp[int(dSampMod)], dSampMod, inc);
delaySampleR = interpolateLinear(delayBufferRrp[inc + FS], delayBufferRrp[int(dSampMod)], dSampMod, inc);
}
else
{
delaySampleL = interpolateLinear(delayBufferLrp[inc], delayBufferLrp[int(dSampMod)], dSampMod, inc);
delaySampleR = interpolateLinear(delayBufferRrp[inc], delayBufferRrp[int(dSampMod)], dSampMod, inc);
}
}
else
{
delaySampleL = delayBufferLrp[int(dSampMod)];
delaySampleR = delayBufferRrp[int(dSampMod)];
}
// Add the delayed sample to the current sample
// Weight each sample against how much of the wet/dry mix has been select
outL[i] = ((1 - wetDry)*inL[i] + wetDry*delaySampleL)*0.5;
outR[i] = ((1 - wetDry)*inR[i] + wetDry*delaySampleR)*0.5;
}
// Increment index in relation to where the current buffer will be placed within the delay buffer
// wrap bidx if greater than sample rate
bidx += buffer.getNumSamples();
if (bidx >= FS)bidx -= FS;
// store current freqency and modulation rates
freq = modRate;
Amp = depth;
}
void MLPluginProcessor::prepareToPlay (double sr, int maxFramesPerBlock)
{
MLProc::err prepareErr;
MLProc::err r = preflight();
if (!mpPluginDoc.get()) return;
if (r == MLProc::OK)
{
// get the Juce process lock // TODO ???
const ScopedLock sl (getCallbackLock());
unsigned inChans = getNumInputChannels();
unsigned outChans = getNumOutputChannels();
mEngine.setInputChannels(inChans);
mEngine.setOutputChannels(outChans);
unsigned bufSize = 0;
unsigned chunkSize = 0;
// choose new buffer size and vector size.
{
// bufSize is the smallest power of two greater than maxFramesPerBlock.
int maxFramesBits = bitsToContain(maxFramesPerBlock);
bufSize = 1 << maxFramesBits;
// vector size is desired processing block size, set this to default size of signal.
chunkSize = min((int)bufSize, (int)kMLProcessChunkSize);
}
// dsp engine has one chunkSize of latency in order to run constant block size.
setLatencySamples(chunkSize);
// debug() << "MLPluginProcessor: prepareToPlay: rate " << sr << ", buffer size " << bufSize << ", vector size " << vecSize << ". \n";
// build: turn XML description into graph of processors
if (mEngine.getGraphStatus() != MLProc::OK)
{
bool makeSignalInputs = inChans > 0;
r = mEngine.buildGraphAndInputs(&*mpPluginDoc, makeSignalInputs, wantsMIDI());
// debug() << getNumParameters() << " parameters in description.\n";
}
else
{
// debug() << "MLPluginProcessor graph OK.\n";
}
#ifdef DEBUG
theSymbolTable().audit();
//theSymbolTable().dump();
#endif
// compile: schedule graph of processors , setup connections, allocate buffers
if (mEngine.getCompileStatus() != MLProc::OK)
{
mEngine.compileEngine();
}
else
{
debug() << "compile OK.\n";
}
// prepare to play: resize and clear processors
prepareErr = mEngine.prepareEngine(sr, bufSize, chunkSize);
if (prepareErr != MLProc::OK)
{
debug() << "MLPluginProcessor: prepareToPlay error: \n";
}
// mEngine.dump();
// after prepare to play, set state from saved blob if one exists
const unsigned blobSize = mSavedParamBlob.getSize();
if (blobSize > 0)
{
setStateFromBlob (mSavedParamBlob.getData(), blobSize);
mSavedParamBlob.setSize(0);
}
else
{
mEngine.clear();
if (!mHasParametersSet)
{
loadDefaultPreset();
}
}
if(!mInitialized)
{
initializeProcessor();
mInitialized = true;
}
mEngine.setEnabled(prepareErr == MLProc::OK);
}
}
void Mcfx_convolverAudioProcessor::LoadConfiguration(File configFile)
{
if (!configFile.existsAsFile())
{
String debug;
debug << "Configuration file does not exist!" << configFile.getFullPathName() << "\n\n";
//std::cout << debug << std::endl;
DebugPrint(debug);
return;
}
// unload first....
if (_configLoaded) {
while (_isProcessing) {
Sleep(1);
}
std::cout << "Unloading Config..." << std::endl;
UnloadConfiguration();
_DebugText = String(); // clear debug window
std::cout << "Config Unloaded..." << std::endl;
}
if (_ConvBufferSize < _BufferSize)
_ConvBufferSize = _BufferSize;
_ConvBufferSize = nextPowerOfTwo(_ConvBufferSize);
String debug;
debug << "\ntrying to load " << configFile.getFullPathName() << "\n\n";
DebugPrint(debug);
// debug print samplerate and buffer size
debug = "Samplerate: ";
debug << _SampleRate;
debug << " Host Buffer Size: ";
debug << (int)_BufferSize;
debug << " Internal Buffer Size: ";
debug << (int)_ConvBufferSize;
DebugPrint(debug);
activePreset = configFile.getFileName(); // store filename only, on restart search preset folder for it!
box_preset_str = configFile.getFileNameWithoutExtension();
StringArray myLines;
configFile.readLines(myLines);
// global settings
String directory("");
AudioSampleBuffer TempAudioBuffer(1,256);
conv_data.setSampleRate(_SampleRate);
// iterate over all lines
for (int currentLine = 0; currentLine < myLines.size(); currentLine++)
{
// get the line and remove spaces from start and end
String line (myLines[currentLine].trim());
if (line.startsWith("#"))
{
// ignore these lines
} else if (line.contains("/cd")) {
line = line.trimCharactersAtStart("/cd").trim();
directory = line;
std::cout << "Dir: " << directory << std::endl;
} else if (line.contains("/convolver/new")) {
int t_in_ch = 0;
int t_out_ch = 0;
line = line.trimCharactersAtStart("/convolver/new").trim();
String::CharPointerType lineChar = line.getCharPointer();
sscanf(lineChar, "%i%i", &t_in_ch, &t_out_ch);
} else if (line.contains("/impulse/read"))
{
int in_ch = 0;
int out_ch = 0;
float gain = 1.f;
int delay = 0;
int offset = 0;
int length = 0;
int channel = 0;
char filename[100];
line = line.trimCharactersAtStart("/impulse/read").trim();
String::CharPointerType lineChar = line.getCharPointer();
sscanf(lineChar, "%i%i%f%i%i%i%i%s", &in_ch, &out_ch, &gain, &delay, &offset, &length, &channel, filename);
// printf("load ir: %i %i %f %i %i %i %i %s \n", in_ch, out_ch, gain, delay, offset, length, channel, filename);
File IrFilename;
// check if /cd is defined in config
if (directory.isEmpty()) {
IrFilename = configFile.getParentDirectory().getChildFile(String(filename));
} else { // /cd is defined
if (directory.startsWith("/"))
{
// absolute path is defined
File path(directory);
IrFilename = path.getChildFile(String(filename));
} else {
// relative path to the config file is defined
IrFilename = configFile.getParentDirectory().getChildFile(directory).getChildFile(String(filename));
}
}
if ( ( in_ch < 1 ) || ( in_ch > getNumInputChannels() ) || ( out_ch < 1 ) || ( out_ch > getNumOutputChannels() ) )
{
String debug;
debug << "ERROR: channel assignment not feasible: In: " << in_ch << " Out: " << out_ch;
DebugPrint(debug << "\n");
} else {
double src_samplerate;
if (loadIr(&TempAudioBuffer, IrFilename, channel-1, src_samplerate, gain, offset, length))
{
// std::cout << "Length: " << TempAudioBuffer.getNumSamples() << " Channels: " << TempAudioBuffer.getNumChannels() << " MaxLevel: " << TempAudioBuffer.getRMSLevel(0, 0, 2048) << std::endl;
// add IR to my convolution data - offset and length are already done while reading file
conv_data.addIR(in_ch-1, out_ch-1, 0, delay, 0, &TempAudioBuffer, src_samplerate);
String debug;
debug << "conv # " << conv_data.getNumIRs() << " " << IrFilename.getFullPathName() << " loaded";
DebugPrint(debug << "\n");
} else {
String debug;
debug << "ERROR: not loaded: " << IrFilename.getFullPathName();
DebugPrint(debug << "\n");
}
} // end check channel assignment
} // end "/impulse/read" line
else if (line.contains("/impulse/densewav"))
{
// TODO!
} // end "/impulse/densewav" line
} // iterate over lines
// initiate convolution
#ifdef USE_ZITA_CONVOLVER
int err=0;
unsigned int options = 0;
options |= Convproc::OPT_FFTW_MEASURE;
options |= Convproc::OPT_VECTOR_MODE;
zita_conv.set_options (options);
zita_conv.set_density(0.5);
printf("max length: %lli \n", conv_data.getMaxLength());
err = zita_conv.configure(conv_data.getNumInputChannels(), conv_data.getNumOutputChannels(), (unsigned int)conv_data.getMaxLength(), _ConvBufferSize, _ConvBufferSize, Convproc::MAXPART);
for (int i=0; i < conv_data.getNumIRs(); i++)
{
err = zita_conv.impdata_create(conv_data.getInCh(i), conv_data.getOutCh(i), 1, (float *)conv_data.getIR(i)->getReadPointer(0), (unsigned int)conv_data.getDelay(i), (unsigned int)conv_data.getLength(i));
}
zita_conv.print();
zita_conv.start_process(CONVPROC_SCHEDULER_PRIORITY, CONVPROC_SCHEDULER_CLASS);
#else
mtxconv_.Configure(conv_data.getNumInputChannels(), conv_data.getNumOutputChannels(), _ConvBufferSize, conv_data.getMaxLength(), 8192);
for (int i=0; i < conv_data.getNumIRs(); i++)
{
mtxconv_.AddFilter(conv_data.getInCh(i), conv_data.getOutCh(i), *conv_data.getIR(i));
// no delay and length yet!
}
mtxconv_.StartProc();
#endif
_configLoaded = true;
setLatencySamples(_ConvBufferSize-_BufferSize);
_min_in_ch = conv_data.getNumInputChannels();
_min_out_ch = conv_data.getNumOutputChannels();
_num_conv = conv_data.getNumIRs();
_configFile = configFile;
sendChangeMessage(); // notify editor
}
void PitchTuneAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
AudioPlayHead::CurrentPositionInfo posInfo;
bool isHostGoing_ = false;
if (getPlayHead() != 0 && getPlayHead()->getCurrentPosition(posInfo)) {
isHostGoing_ = posInfo.isPlaying;//(posInfo.isPlaying || posInfo.isRecording);
updateBpm(posInfo.bpm, posInfo.timeSigDenominator);
}
PitchTuneAudioProcessorEditor *e = (PitchTuneAudioProcessorEditor*)getActiveEditor();
if (e) {
if (e->isVisible()) {
e->ppq = posInfo.ppqPosition;
e->type = 1;
e->triggerAsyncUpdate();
}
}
if (isRecording) {
if (isHostGoing_) {
//record when host is playing
if (sampleBeingRecorded && sampleBeingRecorded->getCursor() == 0) {
// first time recording, store ppq
sampleBeingRecorded->startPpq = posInfo.ppqPosition;
//set recording flag
sampleBeingRecorded->startRecording();
}
float* channelData = buffer.getSampleData (0);
sampleBeingRecorded->record(channelData, buffer.getNumSamples());
}
else {
if (sampleBeingRecorded && sampleBeingRecorded->isRecording) {
//store stop ppq
sampleBeingRecorded->stopPpq = posInfo.ppqPosition;
//daw has stopped
stopTransferring();
//process pitch
processPitch();
}
}
}
else {
//playback the processed
float* channelData = buffer.getSampleData (0);
if (isHostGoing_) {
int nClips = (int)samples.size();
for (int i = 0; i < nClips; ++i) {
Sample *curSample = samples[i];
if (curSample ->startPpq >= posInfo.ppqPosition && !curSample ->isPlaying) {
//reach the start ppq
curSample ->startPlay();
}
if (posInfo.ppqPosition >= curSample ->stopPpq && curSample ->isPlaying) {
//reach the end ppq
curSample->stopPlay();
}
if (curSample ->isPlaying) {
curSample ->play(channelData, buffer.getNumSamples(), pitchProcessor->psola, (long)(posInfo.ppqPosition / Utility::numBeatsPerSample));
}
}
}
}
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
{
buffer.clear (i, 0, buffer.getNumSamples());
}
lastBlockPpq = posInfo.ppqPosition;
}
void LowhighpassAudioProcessor::checkFilters()
{
///////////////////////
// low cut parameters and filters
if (_lc_freq_param != _lc_freq_param_)
{
_IIR_LC_Coeff = _IIR_LC_Coeff.makeHighPass(getSampleRate(), param2freq(_lc_freq_param));
for (int i = 0; i < _LC_IIR_1.size(); i++) {
_LC_IIR_1.getUnchecked(i)->setCoefficients(_IIR_LC_Coeff);
_LC_IIR_2.getUnchecked(i)->setCoefficients(_IIR_LC_Coeff);
}
_lc_freq_param_ = _lc_freq_param; // set old value
}
// add filters if necessary
if (_LC_IIR_1.size() < getNumInputChannels()) {
while (getNumInputChannels() - _LC_IIR_1.size() > 0) {
_LC_IIR_1.add(new IIRFilter());
_LC_IIR_1.getLast()->setCoefficients(_IIR_LC_Coeff);
_LC_IIR_2.add(new IIRFilter());
_LC_IIR_2.getLast()->setCoefficients(_IIR_LC_Coeff);
}
}
///////////////////////
// high cut parameters and filters
if (_hc_freq_param != _hc_freq_param_)
{
_IIR_HC_Coeff = _IIR_HC_Coeff.makeLowPass(getSampleRate(), param2freq(_hc_freq_param));
for (int i = 0; i < _HC_IIR_1.size(); i++) {
_HC_IIR_1.getUnchecked(i)->setCoefficients(_IIR_HC_Coeff);
_HC_IIR_2.getUnchecked(i)->setCoefficients(_IIR_HC_Coeff);
}
_hc_freq_param_ = _hc_freq_param; // set old value
}
// add filters if necessary
if (_HC_IIR_1.size() < getNumInputChannels()) {
while (getNumInputChannels() - _HC_IIR_1.size() > 0) {
_HC_IIR_1.add(new IIRFilter());
_HC_IIR_1.getLast()->setCoefficients(_IIR_HC_Coeff);
_HC_IIR_2.add(new IIRFilter());
_HC_IIR_2.getLast()->setCoefficients(_IIR_HC_Coeff);
}
}
///////////////////
// Peak Filter 1
if (_pf1_freq_param != _pf1_freq_param_ || _pf1_gain_param != _pf1_gain_param_ || _pf1_q_param != _pf1_q_param_)
{
// get new coefficients
_IIR_PF_Coeff_1 = _IIR_PF_Coeff_1.makePeakFilter(getSampleRate(), param2freq(_pf1_freq_param), param2q(_pf1_q_param), param2gain(_pf1_gain_param));
// update coefficients for filters
for (int i = 0; i < _PF_IIR_1.size(); i++) {
_PF_IIR_1.getUnchecked(i)->setCoefficients(_IIR_PF_Coeff_1);
}
// save "old" values
_pf1_freq_param_ = _pf1_freq_param;
_pf1_gain_param_ = _pf1_gain_param;
_pf1_q_param_ = _pf1_q_param;
}
// add filters if necessary
if (_PF_IIR_1.size() < getNumInputChannels()) {
while (getNumInputChannels() - _PF_IIR_1.size() > 0) {
_PF_IIR_1.add(new IIRFilter());
_PF_IIR_1.getLast()->setCoefficients(_IIR_PF_Coeff_1);
_PF_IIR_1.add(new IIRFilter());
_PF_IIR_1.getLast()->setCoefficients(_IIR_PF_Coeff_1);
}
}
///////////////////
// Peak Filter 2
if (_pf2_freq_param != _pf2_freq_param_ || _pf2_gain_param != _pf2_gain_param_ || _pf2_q_param != _pf2_q_param_)
{
// get new coefficients
_IIR_PF_Coeff_2 = _IIR_PF_Coeff_2.makePeakFilter(getSampleRate(), param2freq(_pf2_freq_param), param2q(_pf2_q_param), param2gain(_pf2_gain_param));
// update coefficients for filters
for (int i = 0; i < _PF_IIR_2.size(); i++) {
_PF_IIR_2.getUnchecked(i)->setCoefficients(_IIR_PF_Coeff_2);
}
// save "old" values
_pf2_freq_param_ = _pf2_freq_param;
_pf2_gain_param_ = _pf2_gain_param;
_pf2_q_param_ = _pf2_q_param;
}
// add filters if necessary
if (_PF_IIR_2.size() < getNumInputChannels()) {
while (getNumInputChannels() - _PF_IIR_2.size() > 0) {
_PF_IIR_2.add(new IIRFilter());
_PF_IIR_2.getLast()->setCoefficients(_IIR_PF_Coeff_2);
_PF_IIR_2.add(new IIRFilter());
_PF_IIR_2.getLast()->setCoefficients(_IIR_PF_Coeff_2);
}
}
///////////////////
// Low Shelf Filter
if (_ls_freq_param != _ls_freq_param_ || _ls_gain_param != _ls_gain_param_ || _ls_q_param != _ls_q_param_)
{
// get new coefficients
_IIR_LS_Coeff = _IIR_LS_Coeff.makeLowShelf(getSampleRate(), param2freq(_ls_freq_param), param2q(_ls_q_param), param2gain(_ls_gain_param));
// update coefficients for filters
for (int i = 0; i < _LS_IIR.size(); i++) {
_LS_IIR.getUnchecked(i)->setCoefficients(_IIR_LS_Coeff);
}
// save "old" values
_ls_freq_param_ = _ls_freq_param;
_ls_gain_param_ = _ls_gain_param;
_ls_q_param_ = _ls_q_param;
}
// add filters if necessary
if (_LS_IIR.size() < getNumInputChannels()) {
while (getNumInputChannels() - _LS_IIR.size() > 0) {
_LS_IIR.add(new IIRFilter());
_LS_IIR.getLast()->setCoefficients(_IIR_LS_Coeff);
_LS_IIR.add(new IIRFilter());
_LS_IIR.getLast()->setCoefficients(_IIR_LS_Coeff);
}
}
///////////////////
// High Shelf Filter
if (_hs_freq_param != _hs_freq_param_ || _hs_gain_param != _hs_gain_param_ || _hs_q_param != _hs_q_param_)
{
// get new coefficients
_IIR_HS_Coeff = _IIR_HS_Coeff.makeHighShelf(getSampleRate(), param2freq(_hs_freq_param), param2q(_hs_q_param), param2gain(_hs_gain_param));
// update coefficients for filters
for (int i = 0; i < _HS_IIR.size(); i++) {
_HS_IIR.getUnchecked(i)->setCoefficients(_IIR_HS_Coeff);
}
// save "old" values
_hs_freq_param_ = _hs_freq_param;
_hs_gain_param_ = _hs_gain_param;
_hs_q_param_ = _hs_q_param;
}
// add filters if necessary
if (_HS_IIR.size() < getNumInputChannels()) {
while (getNumInputChannels() - _HS_IIR.size() > 0) {
_HS_IIR.add(new IIRFilter());
_HS_IIR.getLast()->setCoefficients(_IIR_HS_Coeff);
_HS_IIR.add(new IIRFilter());
_HS_IIR.getLast()->setCoefficients(_IIR_HS_Coeff);
}
}
}
//==============================================================================
void Ambix_converterAudioProcessor::prepareToPlay (double sampleRate, int samplesPerBlock)
{
// Use this method as the place to do any pre-playback
// initialisation that you need..
output_buffer.setSize(std::max(getNumOutputChannels(), getNumInputChannels()), samplesPerBlock);
}
void TheFunctionAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
// This is the place where you'd normally do the guts of your plugin's
// audio processing...
int numberOfSamples = buffer.getNumSamples();
float* channelDataL = buffer.getWritePointer (0);
float* channelDataR = buffer.getWritePointer (1);
tmpBuffer.copyFrom(0, 0, channelDataL, numberOfSamples);
tmpBuffer.copyFrom(1, 0, channelDataR, numberOfSamples);
float* inputDataL = tmpBuffer.getWritePointer (0);
float* inputDataR = tmpBuffer.getWritePointer (1);
float LinLout; // Left IN Left OUT - Gain
float LinRout; // Left IN Right OUT - Gain
float RinLout; // Right IN Left OUT - Gain
float RinRout; // Right IN Right OUT - Gain
// Work out L+R channel pan positions
if (panL < 0.5)
{
LinLout = 1;
LinRout = panL * 2;
}
else
{
LinLout = ((panL *2) -2) *-1;
LinRout = 1;
}
if (panR < 0.5)
{
RinLout = 1;
RinRout = panR * 2;
}
else
{
RinLout = ((panR *2) -2) *-1;
RinRout = 1;
}
//******************
// Apply individual channel phase, pan and gain
float peakLevelL = 0;
float peakLevelR = 0;
float RMSLevelL = 0;
float RMSLevelR = 0;
for (int i = 0; i < numberOfSamples; ++i)
{
// Phase
if (phaseL >= 0.5)
inputDataL[i] *= -1;
if (phaseR >= 0.5)
inputDataR[i] *= -1;
// Pan
channelDataR[i] = (inputDataR[i] * RinRout) + (inputDataL[i] * LinRout);
channelDataL[i] = (inputDataL[i] * LinLout) + (inputDataR[i] * RinLout);
// Gain
channelDataL[i] *= gainL;
channelDataR[i] *= gainR;
if (channelDataL[i] > peakLevelL)
peakLevelL = channelDataL[i];
if (channelDataR[i] > peakLevelR)
peakLevelR = channelDataR[i];
RMSLevelL += std::abs(channelDataL[i]);
RMSLevelR += std::abs(channelDataR[i]);
}
//******************
// Master Gain
buffer.applyGain (0, numberOfSamples, gain);
// In case we have more outputs than inputs, we'll clear any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
{
buffer.clear (i, 0, buffer.getNumSamples());
}
}
void Processor::processBlock(AudioSampleBuffer& buffer, MidiBuffer& /*midiMessages*/)
{
const int numInputChannels = getNumInputChannels();
const int numOutputChannels = getNumOutputChannels();
const size_t samplesToProcess = buffer.getNumSamples();
// Determine channel data
float* channelData0 = nullptr;
float* channelData1 = nullptr;
if (numInputChannels == 1)
{
channelData0 = buffer.getSampleData(0);
channelData1 = buffer.getSampleData(0);
}
else if (numInputChannels == 2)
{
channelData0 = buffer.getSampleData(0);
channelData1 = buffer.getSampleData(1);
}
// Convolution
_wetBuffer.clear();
if (numInputChannels > 0 && numOutputChannels > 0)
{
float autoGain = 1.0f;
if (getParameter(Parameters::AutoGainOn))
{
autoGain = DecibelScaling::Db2Gain(getParameter(Parameters::AutoGainDecibels));
}
// Convolve
IRAgent* irAgent00 = getAgent(0, 0);
if (irAgent00 && irAgent00->getConvolver() && numInputChannels >= 1 && numOutputChannels >= 1)
{
irAgent00->process(channelData0, &_convolutionBuffer[0], samplesToProcess);
_wetBuffer.addFrom(0, 0, &_convolutionBuffer[0], samplesToProcess, autoGain);
}
IRAgent* irAgent01 = getAgent(0, 1);
if (irAgent01 && irAgent01->getConvolver() && numInputChannels >= 1 && numOutputChannels >= 2)
{
irAgent01->process(channelData0, &_convolutionBuffer[0], samplesToProcess);
_wetBuffer.addFrom(1, 0, &_convolutionBuffer[0], samplesToProcess, autoGain);
}
IRAgent* irAgent10 = getAgent(1, 0);
if (irAgent10 && irAgent10->getConvolver() && numInputChannels >= 2 && numOutputChannels >= 1)
{
irAgent10->process(channelData1, &_convolutionBuffer[0], samplesToProcess);
_wetBuffer.addFrom(0, 0, &_convolutionBuffer[0], samplesToProcess, autoGain);
}
IRAgent* irAgent11 = getAgent(1, 1);
if (irAgent11 && irAgent11->getConvolver() && numInputChannels >= 2 && numOutputChannels >= 2)
{
irAgent11->process(channelData1, &_convolutionBuffer[0], samplesToProcess);
_wetBuffer.addFrom(1, 0, &_convolutionBuffer[0], samplesToProcess, autoGain);
}
}
// Stereo width
if (numOutputChannels >= 2)
{
_stereoWidth.updateWidth(getParameter(Parameters::StereoWidth));
_stereoWidth.process(_wetBuffer.getSampleData(0), _wetBuffer.getSampleData(1), samplesToProcess);
}
// Dry/wet gain
{
float dryGain0, dryGain1;
_dryGain.updateValue(DecibelScaling::Db2Gain(getParameter(Parameters::DryDecibels)));
_dryGain.getSmoothValues(samplesToProcess, dryGain0, dryGain1);
buffer.applyGainRamp(0, samplesToProcess, dryGain0, dryGain1);
}
{
float wetGain0, wetGain1;
_wetGain.updateValue(DecibelScaling::Db2Gain(getParameter(Parameters::WetDecibels)));
_wetGain.getSmoothValues(samplesToProcess, wetGain0, wetGain1);
_wetBuffer.applyGainRamp(0, samplesToProcess, wetGain0, wetGain1);
}
// Level measurement (dry)
if (numInputChannels == 1)
{
_levelMeasurementsDry[0].process(samplesToProcess, buffer.getSampleData(0));
_levelMeasurementsDry[1].reset();
}
else if (numInputChannels == 2)
{
_levelMeasurementsDry[0].process(samplesToProcess, buffer.getSampleData(0));
_levelMeasurementsDry[1].process(samplesToProcess, buffer.getSampleData(1));
}
// Sum wet to dry signal
{
float dryOnGain0, dryOnGain1;
_dryOn.updateValue(getParameter(Parameters::DryOn) ? 1.0f : 0.0f);
_dryOn.getSmoothValues(samplesToProcess, dryOnGain0, dryOnGain1);
buffer.applyGainRamp(0, samplesToProcess, dryOnGain0, dryOnGain1);
}
{
float wetOnGain0, wetOnGain1;
_wetOn.updateValue(getParameter(Parameters::WetOn) ? 1.0f : 0.0f);
_wetOn.getSmoothValues(samplesToProcess, wetOnGain0, wetOnGain1);
if (numOutputChannels > 0)
{
buffer.addFromWithRamp(0, 0, _wetBuffer.getSampleData(0), samplesToProcess, wetOnGain0, wetOnGain1);
}
if (numOutputChannels > 1)
{
buffer.addFromWithRamp(1, 0, _wetBuffer.getSampleData(1), samplesToProcess, wetOnGain0, wetOnGain1);
}
}
// Level measurement (wet/out)
if (numOutputChannels == 1)
{
_levelMeasurementsWet[0].process(samplesToProcess, _wetBuffer.getSampleData(0));
_levelMeasurementsWet[1].reset();
_levelMeasurementsOut[0].process(samplesToProcess, buffer.getSampleData(0));
_levelMeasurementsOut[1].reset();
}
else if (numOutputChannels == 2)
{
_levelMeasurementsWet[0].process(samplesToProcess, _wetBuffer.getSampleData(0));
_levelMeasurementsWet[1].process(samplesToProcess, _wetBuffer.getSampleData(1));
_levelMeasurementsOut[0].process(samplesToProcess, buffer.getSampleData(0));
_levelMeasurementsOut[1].process(samplesToProcess, buffer.getSampleData(1));
}
// In case we have more outputs than inputs, we'll clear any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
for (int i=numInputChannels; i<numOutputChannels; ++i)
{
buffer.clear(i, 0, buffer.getNumSamples());
}
// Update beats per minute info
float beatsPerMinute = 0.0f;
juce::AudioPlayHead* playHead = getPlayHead();
if (playHead)
{
juce::AudioPlayHead::CurrentPositionInfo currentPositionInfo;
if (playHead->getCurrentPosition(currentPositionInfo))
{
beatsPerMinute = static_cast<float>(currentPositionInfo.bpm);
}
}
if (::fabs(_beatsPerMinute.exchange(beatsPerMinute)-beatsPerMinute) > 0.001f)
{
notifyAboutChange();
}
}
void DRowAudioFilter::processBlock (AudioSampleBuffer& buffer,
MidiBuffer& midiMessages)
{
smoothParameters();
const int numInputChannels = getNumInputChannels();
int numSamples = buffer.getNumSamples();
// set up the parameters to be used
float preDelay = (float)params[PREDELAY].getSmoothedValue();
float earlyDecay = (float)params[EARLYDECAY].getSmoothedNormalisedValue();
earlyDecay = sqrt(sqrt(earlyDecay));
float late = (float)params[EARLYLATEMIX].getSmoothedNormalisedValue();
float early = 1.0f - late;
float fbCoeff = (float)params[FBCOEFF].getSmoothedNormalisedValue();
fbCoeff = -sqrt(sqrt(fbCoeff));
float delayTime = (float)params[DELTIME].getSmoothedValue();
float filterCf = (float)params[FILTERCF].getSmoothedValue();
float allpassCoeff = (float)params[DIFFUSION].getSmoothedNormalisedValue();
float spread1 = (float)params[SPREAD].getSmoothedNormalisedValue();
float spread2 = 1.0f - spread1;
float lowEQGain = (float)decibelsToAbsolute(params[LOWEQ].getSmoothedValue());
float highEQGain = (float)decibelsToAbsolute(params[HIGHEQ].getSmoothedValue());
float wet = (float)params[WETDRYMIX].getSmoothedNormalisedValue();
float dry = 1.0f - wet;
float width = (spread1-0.5f) * 0.1f * delayTime;
// we can only deal with 2-in, 2-out at the moment
if (numInputChannels == 2)
{
// pre-delay section
preDelayFilterL.setDelayTime(currentSampleRate, preDelay);
preDelayFilterR.setDelayTime(currentSampleRate, preDelay);
// early reflections section
int roomShape = roundFloatToInt(params[ROOMSHAPE].getValue());
float delayCoeff = 0.08f * delayTime;
if (roomShape != prevRoomShape)
{
delayLineL.removeAllTaps();
delayLineR.removeAllTaps();
for(int i = 0; i < 5; i++) {
delayLineL.addTapAtTime(earlyReflectionCoeffs[roomShape-3][i], currentSampleRate);
delayLineR.addTapAtTime(earlyReflectionCoeffs[roomShape-3][i], currentSampleRate);
}
// we have to set this here incase the delay time has not changed
delayLineL.setTapSpacingExplicitly(delayCoeff);
delayLineR.setTapSpacingExplicitly(delayCoeff + spread1);
prevRoomShape = roomShape;
}
delayLineL.setTapSpacing(delayCoeff);
delayLineL.scaleFeedbacks(earlyDecay);
delayLineR.setTapSpacing(delayCoeff + spread1);
delayLineR.scaleFeedbacks(earlyDecay);
// comb filter section
for (int i = 0; i < 8; ++i)
{
delayTime *= filterMultCoeffs[i];
delayTime += Random::getSystemRandom().nextInt(100)*0.0001;
setupFilter(combFilterL[i], fbCoeff, delayTime, filterCf);
setupFilter(combFilterR[i], fbCoeff, delayTime + width, filterCf);
}
// allpass section
for (int i = 0; i < 4; ++i)
{
delayTime *= allpassMultCoeffs[i];
delayTime -= Random::getSystemRandom().nextInt(100)*0.0001;
allpassFilterL[i].setGain(allpassCoeff);
allpassFilterL[i].setDelayTime(currentSampleRate, delayTime);
allpassFilterR[i].setGain(allpassCoeff);
allpassFilterR[i].setDelayTime(currentSampleRate, delayTime + width);
}
// final EQ section
lowEQL.makeLowShelf(currentSampleRate, 500, 1, lowEQGain);
lowEQR.makeLowShelf(currentSampleRate, 500, 1, lowEQGain);
highEQL.makeHighShelf(currentSampleRate, 3000, 1, highEQGain);
highEQR.makeHighShelf(currentSampleRate, 3000, 1, highEQGain);
//========================================================================
// Processing
//========================================================================
int noSamples = buffer.getNumSamples();
int noChannels = buffer.getNumChannels();
// create a copy of the input buffer so we can apply a wet/dry mix later
AudioSampleBuffer wetBuffer(noChannels, noSamples);
wetBuffer.copyFrom(0, 0, buffer, 0, 0, noSamples);
wetBuffer.copyFrom(1, 0, buffer, 1, 0, noSamples);
// mono mix wet buffer (used for stereo spread later)
float *pfWetL = wetBuffer.getSampleData(0);
float *pfWetR = wetBuffer.getSampleData(1);
while (--numSamples >= 0)
{
*pfWetL = *pfWetR = (0.5f * (*pfWetL + *pfWetR));
pfWetL++;
pfWetR++;
}
numSamples = buffer.getNumSamples();
// apply the pre-delay to the wet buffer
preDelayFilterL.processSamples(wetBuffer.getSampleData(0), noSamples);
preDelayFilterR.processSamples(wetBuffer.getSampleData(1), noSamples);
// create a buffer to hold the early reflections
AudioSampleBuffer earlyReflections(noChannels, noSamples);
earlyReflections.copyFrom(0, 0, wetBuffer, 0, 0, noSamples);
earlyReflections.copyFrom(1, 0, wetBuffer, 1, 0, noSamples);
// and process the early reflections
delayLineL.processSamples(earlyReflections.getSampleData(0), noSamples);
delayLineR.processSamples(earlyReflections.getSampleData(1), noSamples);
// create a buffer to hold the late reverb
AudioSampleBuffer lateReverb(noChannels, noSamples);
lateReverb.clear();
float *pfLateL = lateReverb.getSampleData(0);
float *pfLateR = lateReverb.getSampleData(1);
pfWetL = wetBuffer.getSampleData(0);
pfWetR = wetBuffer.getSampleData(1);
// comb filter section
for (int i = 0; i < 8; ++i)
{
combFilterL[i].processSamplesAdding(pfWetL, pfLateL, noSamples);
combFilterR[i].processSamplesAdding(pfWetR, pfLateR, noSamples);
}
// allpass filter section
for (int i = 0; i < 4; ++i)
{
allpassFilterL[i].processSamples(lateReverb.getSampleData(0), noSamples);
allpassFilterR[i].processSamples(lateReverb.getSampleData(1), noSamples);
}
// clear wet buffer
wetBuffer.clear();
// add early reflections to wet buffer
wetBuffer.addFrom(0, 0, earlyReflections, 0, 0, noSamples, early);
wetBuffer.addFrom(1, 0, earlyReflections, 1, 0, noSamples, early);
// add late reverb to wet buffer
lateReverb.applyGain(0, noSamples, 0.1f);
wetBuffer.addFrom(0, 0, lateReverb, 0, 0, noSamples, late);
wetBuffer.addFrom(1, 0, lateReverb, 1, 0, noSamples, late);
// final EQ
lowEQL.processSamples(pfWetL, noSamples);
lowEQR.processSamples(pfWetR, noSamples);
highEQL.processSamples(pfWetL, noSamples);
highEQR.processSamples(pfWetR, noSamples);
// create stereo spread
while (--numSamples >= 0)
{
float fLeft = *pfWetL;
float fRight = *pfWetR;
*pfWetL = (fLeft * spread1) + (fRight * spread2);
*pfWetR = (fRight * spread1) + (fLeft * spread2);
pfWetL++;
pfWetR++;
}
numSamples = buffer.getNumSamples();
// apply wet/dry mix gains
wetBuffer.applyGain(0, noSamples, wet);
buffer.applyGain(0, noSamples, dry);
// add wet buffer to output buffer
buffer.addFrom(0, 0, wetBuffer, 0, 0, noSamples);
buffer.addFrom(1, 0, wetBuffer, 1, 0, noSamples);
}
//========================================================================
// in case we have more outputs than inputs, we'll clear any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
{
buffer.clear (i, 0, buffer.getNumSamples());
}
}
void DRowAudioFilter::processBlock (AudioSampleBuffer& buffer,
MidiBuffer& midiMessages)
{
smoothParameters();
const int numInputChannels = getNumInputChannels();
// create parameters to use
fPreCf = params[PRE].getSmoothedValue();
fPostCf = params[POST].getSmoothedValue();
float fInGain = params[INGAIN].getSmoothedValue();
float fOutGain = params[OUTGAIN].getSmoothedValue();
float fColour = 100 * params[COLOUR].getSmoothedNormalisedValue();
// set up array of pointers to samples
int numSamples = buffer.getNumSamples();
int samplesLeft = numSamples;
float* pfSample[numInputChannels];
for (int channel = 0; channel < numInputChannels; channel++)
pfSample[channel] = buffer.getSampleData(channel);
if (numInputChannels == 2)
{
// input filter the samples
inFilterL.processSamples(pfSample[0], numSamples);
inFilterR.processSamples(pfSample[1], numSamples);
//========================================================================
while (--samplesLeft >= 0)
{
// distort
*pfSample[0] *= fInGain;
*pfSample[1] *= fInGain;
// shape (using the limit of tanh is 1 so no cliping required)
*pfSample[0] = tanh(*pfSample[0] * fColour);
*pfSample[1] = tanh(*pfSample[1] * fColour);
// apply output gain
*pfSample[0] *= fOutGain;
*pfSample[1] *= fOutGain;
// incriment sample pointers
pfSample[0]++;
pfSample[1]++;
}
//========================================================================
// output filter the samples
outFilterL.processSamples(buffer.getSampleData(0), numSamples);
outFilterR.processSamples(buffer.getSampleData(1), numSamples);
}
else if (numInputChannels == 1)
{
// input filter the samples
inFilterL.processSamples(pfSample[0], numSamples);
//========================================================================
while (--samplesLeft >= 0)
{
// distort
*pfSample[0] *= fInGain;
// shape (using the limit of tanh is 1 so no cliping required)
*pfSample[0] = tanh(*pfSample[0] * fColour);
// apply output gain
*pfSample[0] *= fOutGain;
// incriment sample pointers
pfSample[0]++;
}
//========================================================================
// output filter the samples
outFilterL.processSamples(buffer.getSampleData(0), numSamples);
}
// clear any output channels that didn't contain input data
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
buffer.clear (i, 0, buffer.getNumSamples());
}
void Ambix_converterAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
// do the audio processing....
// defines are until 10th order 3d (121 channels)!
// resize output buffer if necessare
int NumSamples = buffer.getNumSamples();
output_buffer.setSize(std::max(getNumOutputChannels(), getNumInputChannels()), NumSamples);
output_buffer.clear(); // in case of 2d where we might throw away some channels
// std::cout << "NumInputChannels: " << getNumInputChannels() << " Buffersize: " << buffer.getNumChannels() << std::endl;
for (int i = 0; i < getNumInputChannels(); i++) // iterate over acn channel numbering
{
int l = 0; // sometimes called n
int m = 0; // -l...l
ACNtoLM(i, l, m);
int _in_ch_seq = in_ch_seq[i];
int _out_ch_seq = out_ch_seq[i];
if (in_2d)
{
_in_ch_seq = in_2d_ch_seq[ACN3DtoACN2D(i)];
if (_in_ch_seq > getNumInputChannels())
_in_ch_seq = -1;
}
if (out_2d)
{
_out_ch_seq = out_2d_ch_seq[ACN3DtoACN2D(i)];
if (_out_ch_seq > getNumOutputChannels())
_out_ch_seq = -1;
}
// std::cout << "InputCh: " << i << " IN_CHANNEL: " << _in_ch_seq << " OUT_CHANNEL: " << _out_ch_seq << std::endl;
if (_in_ch_seq != -1 && _out_ch_seq != -1 && _in_ch_seq < getNumInputChannels())
{
// copy input channels to output channels!
output_buffer.copyFrom(_out_ch_seq, 0, buffer, _in_ch_seq, 0, NumSamples);
// apply normalization conversion gain if different input/output scheme
if (!ch_norm_flat) {
output_buffer.applyGain(_out_ch_seq, 0, NumSamples, in_ch_norm[i]);
}
// do the inversions...
if (flip_cs_phase || flip_param || flop_param || flap_param)
{
signed int flip, flop, flap, total;
flip = flop = flap = total = 1;
// taken from paper Symmetries of Spherical Harmonics by Michael Chapman (Ambi Symp 2009),
// mirror left right
if ( flip_param && (m < 0) ) // m < 0 -> invert
flip = -1;
// mirror front back
if ( flop_param && ( ((m < 0) && !(m % 2)) || ((m >= 0) && (m % 2)) ) ) // m < 0 and even || m >= 0 and odd
flop = -1;
// mirror top bottom
if ( flap_param && ( (l + m) % 2 ) ) // l+m odd ( (odd, even) or (even, odd) )
flap = -1;
// compute total multiplicator
if (flip_cs_phase)
total = acn_cs[i] * flip * flop * flap;
else
total = flip * flop * flap;
output_buffer.applyGain(_out_ch_seq, 0, NumSamples, (float)total);
}
} // index not -1
} // iterate over all input channels
// In case we have more outputs than inputs, we'll clear any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
/*
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
{
output_buffer.clear (i, 0, buffer.getNumSamples());
}
*/
buffer = output_buffer;
}
void AdmvAudioProcessor::processBlock(AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
double cp[2];
int channelCount = 0;
size_t sampleRate = getSampleRate();
for (int channel = 0; channel < (getNumInputChannels() - 1); channel += 2)
{
// No need to process signal if editor is closed
if (getActiveEditor() == NULL)
{
break;
}
// TODO: investigate how to get number of input channels really connected to the plugin ATM.
// It seems that getNumInputChannels() will always return max possible defined by JucePlugin_MaxNumInputChannels
// This solution is bad, because it iterates through all input buffers.
if (!isBlockInformative(buffer, channel / 2))
{
mGonioSegments[channel / 2] = GonioPoints<double>();
mSpectroSegments[channel / 2] = tomatl::dsp::SpectrumBlock();
continue;
}
channelCount += 2;
float* l = buffer.getWritePointer(channel + 0);
float* r = buffer.getWritePointer(channel + 1);
for (int i = 0; i < buffer.getNumSamples(); ++i)
{
std::pair<double, double>* res = mGonioCalcs[channel / 2]->handlePoint(l[i], r[i], sampleRate);
cp[0] = l[i];
cp[1] = r[i];
mSpectroCalcs[channel / 2]->checkSampleRate(getSampleRate());
tomatl::dsp::SpectrumBlock spectroResult = mSpectroCalcs[channel / 2]->process((double*)&cp);
if (res != NULL)
{
mGonioSegments[channel / 2] = GonioPoints<double>(res, mGonioCalcs[channel / 2]->getSegmentLength(), channel / 2, sampleRate);
mLastGonioScale = mGonioCalcs[channel / 2]->getCurrentScaleValue();
}
if (spectroResult.mLength > 0)
{
mSpectroSegments[channel / 2] = spectroResult;
}
}
}
mCurrentInputCount = channelCount;
if (getState().mOutputMode == AdmvPluginState::outputMute)
{
buffer.clear();
}
else
{
// In case we have more outputs than inputs, we'll clear any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
{
buffer.clear(i, 0, buffer.getNumSamples());
}
}
}
void LowhighpassAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& midiMessages)
{
checkFilters();
// std::cout << "Processing channels: " << getNumInputChannels() << std::endl;
// std::cout << "Buffer channels: " << buffer.getNumChannels() << std::endl;
int numSamples = buffer.getNumSamples();
for (int channel = 0; channel < getNumInputChannels(); channel++)
{
// LOW CUT
if (_lc_on_param > 0.5f) {
_LC_IIR_1.getUnchecked(channel)->processSamples(buffer.getWritePointer(channel), numSamples);
// second stage -> 4th order butterworth
if (_lc_order_param > 0.5f)
_LC_IIR_2.getUnchecked(channel)->processSamples(buffer.getWritePointer(channel), numSamples);
}
// HIGH CUT
if (_hc_on_param > 0.5f) {
_HC_IIR_1.getUnchecked(channel)->processSamples(buffer.getWritePointer(channel), numSamples);
// second stage -> 4th order butterworth
if (_hc_order_param > 0.5f)
_HC_IIR_2.getUnchecked(channel)->processSamples(buffer.getWritePointer(channel), numSamples);
}
// PF1
if (_pf1_gain_param != 0.5f) {
_PF_IIR_1.getUnchecked(channel)->processSamples(buffer.getWritePointer(channel), numSamples);
}
// PF2
if (_pf2_gain_param != 0.5f) {
_PF_IIR_2.getUnchecked(channel)->processSamples(buffer.getWritePointer(channel), numSamples);
}
// LS
if (_ls_gain_param != 0.5f) {
_LS_IIR.getUnchecked(channel)->processSamples(buffer.getWritePointer(channel), numSamples);
}
// HS
if (_hs_gain_param != 0.5f) {
_HS_IIR.getUnchecked(channel)->processSamples(buffer.getWritePointer(channel), numSamples);
}
}
// In case we have more outputs than inputs, we'll clear any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
{
buffer.clear (i, 0, buffer.getNumSamples());
}
}
void PitchedDelayAudioProcessor::processBlock (AudioSampleBuffer& buffer, MidiBuffer& /*midiMessages*/)
{
ScopedSSECSR csr;
const int numSamples = buffer.getNumSamples();
float* chL = buffer.getSampleData(0);
float* chR = buffer.getSampleData(buffer.getNumChannels()-1);
float* dspProcL = osBufferL[0];
float* dspProcR = osBufferR[0];
{
for (int i=0; i< numSamples; ++i)
{
dspProcL[i] = chL[i];
dspProcR[i] = chR[i];
}
int blockSize = numSamples;
for (int i=0; i<downSamplers.size(); ++i)
{
blockSize /= 2;
DownSampler2x* down = downSamplers[i];
jassert(down != nullptr);
down->processBlock(dspProcL, dspProcR, osBufferL[i+1], osBufferR[i+1], blockSize);
dspProcL = osBufferL[i+1];
dspProcR = osBufferR[i+1];
}
for (int i=0; i<NUMDELAYTABS; ++i)
{
DelayTabDsp* dsp = delays[i];
dsp->processBlock(dspProcL, dspProcR, blockSize);
}
for (int n=0; n<blockSize; ++n)
{
dspProcL[n] = 0;
dspProcR[n] = 0;
}
for (int i=0; i<NUMDELAYTABS; ++i)
{
DelayTabDsp* dsp = delays[i];
if (! dsp->isEnabled())
continue;
const float* procL = dsp->getLeftData();
const float* procR = dsp->getRightData();
for (int n=0; n<blockSize; ++n)
{
dspProcL[n] += procL[n];
dspProcR[n] += procR[n];
}
}
for (int i=upSamplers.size()-1; i >= 0; --i)
{
UpSampler2x* up = upSamplers[i];
jassert(up != nullptr);
up->processBlock(dspProcL, dspProcR, osBufferL[i], osBufferR[i], blockSize);
blockSize *= 2;
dspProcL = osBufferL[i];
dspProcR = osBufferR[i];
}
}
for (int i=0; i<numSamples; ++i)
{
chL[i] *= params[kDryVolume] * 3.981f; // params[kDryVolume] == 1 -> +12 dB
chR[i] *= params[kDryVolume] * 3.981f; // params[kDryVolume] == 1 -> +12 dB
}
latencyCompensation.processBlock(chL, chR, numSamples);
for (int i=0; i<numSamples; ++i)
{
chL[i] = (chL[i] + dspProcL[i]) * params[kMasterVolume] * 3.981f; // params[kMasterVolume] == 1 -> +12 dB
chR[i] = (chR[i] + dspProcR[i]) * params[kMasterVolume] * 3.981f; // params[kMasterVolume] == 1 -> +12 dB
}
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
{
buffer.clear (i, 0, buffer.getNumSamples());
}
}
bool isOutputChannelStereoPair (int index) const { return isPositiveAndBelow (index, getNumInputChannels()); }
void DRowAudioFilter::processBlock (AudioSampleBuffer& buffer,
MidiBuffer& midiMessages)
{
waveformDisplayPre->processBlock(buffer.getSampleData(0), buffer.getNumSamples());
smoothParameters();
const int numInputChannels = getNumInputChannels();
const float oneOverNumInputChannels = 1.0f / numInputChannels;
int numSamples = buffer.getNumSamples();
// create parameters to use
float fThresh = params[THRESH].getNormalisedValue();
float fClosedLevel = params[REDUCTION].getSmoothedNormalisedValue();
float fAttack = params[ATTACK].getSmoothedValue();
float fHold = params[HOLD].getSmoothedValue();
float fRelease = params[RELEASE].getSmoothedValue();
float fMonitor = params[MONITOR].getNormalisedValue();
float fFilter = params[FILTER].getNormalisedValue();
// stereo
if (numInputChannels == 2)
{
// set up array of pointers to samples
float* pfSample[2];
pfSample[0] = buffer.getSampleData(0);
pfSample[1] = buffer.getSampleData(1);
// set-up mixed mono buffer
AudioSampleBuffer mixedBuffer(1, buffer.getNumSamples());
float* pfMixedSample = mixedBuffer.getSampleData(0);
// fill mono mixed buffer
for(int i = 0; i < mixedBuffer.getNumSamples(); i++) {
*pfMixedSample = 0.0;
pfMixedSample++;
}
pfMixedSample = mixedBuffer.getSampleData(0);
for(int i = 0; i < mixedBuffer.getNumSamples(); i++)
{
*pfMixedSample += oneOverNumInputChannels * (*pfSample[0]);
pfSample[0]++;
*pfMixedSample += oneOverNumInputChannels * (*pfSample[1]);
pfSample[1]++;
pfMixedSample++;
}
// filter mixed buffer
if(fFilter > 0.5f)
bandpassFilter.processSamples(mixedBuffer.getSampleData(0), mixedBuffer.getNumSamples());
// reset buffer pointers
pfSample[0] = buffer.getSampleData(0);
pfSample[1] = buffer.getSampleData(1);
pfMixedSample = mixedBuffer.getSampleData(0);
//========================================================================
while (--numSamples >= 0)
{
float fMix = *pfMixedSample;
float fAbsMix = fabsf(fMix);
pfMixedSample++;
if (fAbsMix > fMax)
fMax = fAbsMix;
if (iMeasuredItems >= iMeasureLength)
{
if ( (fMax >= fThresh) && (currentState != attack) ) // opening gate
{
DBG("Attack");
currentState = attack;
noStageSamples = fAttack * currentSampleRate * 0.001;
fOutMultIncriment = (1.0 - fOutMultCurrent) / noStageSamples;
currentStageSample = 0;
changingState = true;
}
else if ( (fMax < fThresh) && ((currentState == attack) || (currentState == open)) ) // closing gate, hold
{
DBG("Hold");
currentState = hold;
noStageSamples = fHold * currentSampleRate * 0.001;
fOutMultIncriment = 0;
currentStageSample = 0;
changingState = true;
}
fMax = 0;
iMeasuredItems = 0;
}
iMeasuredItems++;
// apply appropriate gains to output
if (fMonitor > 0.5f) {
*pfSample[0] = fMix;
*pfSample[1] = fMix;
}
else {
*pfSample[0] *= fOutMultCurrent;
*pfSample[1] *= fOutMultCurrent;
}
// incriment sample pointers
pfSample[0]++;
pfSample[1]++;
fOutMultCurrent += fOutMultIncriment;
currentStageSample++;
if ( (currentStageSample == noStageSamples) && changingState)
{
DBG("Stage finished");
fOutMultIncriment = 0.0;
currentStageSample = 1;
noStageSamples = 0;
// if ended hold do release stage
if (currentState == hold)
{
DBG("Release");
currentState = release;
noStageSamples = fRelease * currentSampleRate * 0.001;
fOutMultIncriment = -((fOutMultCurrent - fClosedLevel) / noStageSamples);
currentStageSample = 0;
changingState = true;
}
else if (currentState == release) {
DBG("Closed");
currentState = closed;
changingState = false;
}
else if (currentState == attack) {
DBG("Open");
currentState = open;
changingState = false;
}
}
}
//========================================================================
// update the sample to use in the meter display
// RMSLeft = buffer.getRMSLevel(0, 0, buffer.getNumSamples());
// peakLeft = buffer.getMagnitude(0, 0, buffer.getNumSamples());
// RMSRight = buffer.getRMSLevel(1 & (numInputChannels-1), 0, buffer.getNumSamples());
// peakRight = buffer.getMagnitude(1 & (numInputChannels-1), 0, buffer.getNumSamples());
waveformDisplayPost->processBlock(buffer.getSampleData(0), buffer.getNumSamples());
RMSLeft = fOutMultIncriment;
RMSRight = fOutMultCurrent;
}
// in case we have more outputs than inputs, we'll clear any output
// channels that didn't contain input data, (because these aren't
// guaranteed to be empty - they may contain garbage).
for (int i = getNumInputChannels(); i < getNumOutputChannels(); ++i)
{
buffer.clear (i, 0, buffer.getNumSamples());
}
}
