Exemplo n.º 1
0
static char *_get_lang_name_from_file(const char *file_name, char *lang_code)
{
   char *line;
   char buf1[256], buf2[256];

   ASSERT(file_name);
   ASSERT(*file_name);
   ASSERT(lang_code);

   lang_code[0] = file_name[0];
   lang_code[1] = file_name[1];
   lang_code[2] = 0;

   get_executable_name(buf1, sizeof(buf1));
   replace_filename(buf2, buf1, file_name, sizeof(buf2));

   push_config_state();
   set_config_file(buf2);

   line = m_strdup(get_config_string(0, "language_name", ""));
   
   pop_config_state();

   if (*line)
      return line;

   free(line);
   return 0;
}
Exemplo n.º 2
0
static void initialize (void)
{
  get_executable_name ();
  setup_regexps ();

  if (target && !detection_mode)
    {
      char fn[STRLEN];
      char *slash;

      fn[0] = '\0';
      if(depfile_name){
          strncpy(fn, depfile_name, STRLEN);
      } else {
          slash = strrchr(target, '/');
          /* copy the path */
          strncat (fn, target, min(STRLEN, slash?slash-target+1:0));
          strncat (fn, ".", STRLEN);
          /* copy the name */
          strncat(fn, slash?slash+1:target, STRLEN);
          strncat (fn, ".d", STRLEN);
      }
      fn[STRLEN-1]=0;

      if((output = fopen (fn, "w"))==0){
        fprintf(stderr, "libgendep.so: cannot open %s for writing\n", fn);
        return;
      }
      write_word (target);
      write_word (":");
    }
}
Exemplo n.º 3
0
void
usage() {
  printf(
    "OpenFlow Switch Manager.\n"
    "Usage: %s [OPTION]... [DESTINATION-RULE]...\n"
    "\n"
    "  -s, --socket=fd             secure channnel socket\n"
    "  -n, --name=SERVICE_NAME     service name\n"
    "  -l, --logging_level=LEVEL   set logging level\n"
    "      --no-flow-cleanup       do not cleanup flows on start\n"
    "  -h, --help                  display this help and exit\n"
    "\n"
    "DESTINATION-RULE:\n"
    "  openflow-message-type::destination-service-name\n"
    "\n"
    "openflow-message-type:\n"
    "  packet_in                   packet-in openflow message type\n"
    "  port_status                 port-status openflow message type\n"
    "  vendor                      vendor openflow message type\n"
    "  state_notify                connection status\n"
    "\n"
    "destination-service-name      destination service name\n"
    , get_executable_name()
  );
}
Exemplo n.º 4
0
void
usage() {
  printf(
    "OpenFlow Switch Manager.\n"
    "Usage: %s [OPTION]... [DESTINATION-RULE]...\n"
    "\n"
    "  -s, --socket=fd                 secure channnel socket\n"
    "  -n, --name=SERVICE_NAME         service name\n"
    "  -l, --logging_level=LEVEL       set logging level\n"
    "  -g, --syslog                    output log messages to syslog\n"
    "  -f, --logging_facility=FACILITY set syslog facility\n"
    "      --no-flow-cleanup           do not cleanup flows on startup\n"
    "      --no-cookie-translation     do not translate cookie values\n"
    "      --no-packet_in              do not allow packet-ins on startup\n"
    "  -h, --help                      display this help and exit\n"
    "\n"
    "DESTINATION-RULE:\n"
    "  openflow-message-type::destination-service-name\n"
    "\n"
    "openflow-message-type:\n"
    "  packet_in                       packet-in openflow message type\n"
    "  port_status                     port-status openflow message type\n"
    "  vendor                          vendor openflow message type\n"
    "  state_notify                    connection status\n"
    "\n"
    "destination-service-name          destination service name\n"
    , get_executable_name()
  );
}
Exemplo n.º 5
0
static void load_pc8x16_font()
{
	char fname[256];
	int n;
	char *p;
	get_executable_name(fname, sizeof(fname));
	n = strlen(fname);
	do n--;
	while (fname[n] !='\\' && fname[n] !='/');
	fname[n] = '\0';
	append_filename(fname, fname, "pc8x16.fnt", sizeof(fname));
	font8x16 = load_font(fname, NULL, NULL);
	if (font8x16)
		return;
	p = getenv("ALLEGRO");
	if (p) {
		strncpy(fname, p, sizeof(fname));
		append_filename(fname, fname, "vitetris", sizeof(fname));
		set_allegro_resource_path(5, fname);
	}
#ifdef UNIX
	set_allegro_resource_path(4, "/usr/share/allegro/vitetris");
	set_allegro_resource_path(3, "/usr/share/allegro");
	set_allegro_resource_path(2, "/usr/local/share/allegro/vitetris");
	set_allegro_resource_path(1, "/usr/local/share/allegro");
#endif
	if (find_allegro_resource(fname, "pc8x16.fnt", 0,0,0,0,0,
							sizeof(fname)) == 0)
		font8x16 = load_font(fname, NULL, NULL);
}
Exemplo n.º 6
0
static char *
add_to_file_dir(const char * prefix, const char * suffix)
{
  char * cur_path;
  char * last;
  char * ret;
  size_t output_len;
  cur_path = get_executable_name();
  if ( cur_path  == NULL ){
    fputs("GetModuleFileName failed\n",stderr);
    exit(2);
  }
  last = strrchr(cur_path, '\\') ;
  if ( last == NULL ){
    fputs("GetModuleFileName failed\n",stderr);
    exit(2);
  }
  *last = '\0';

  output_len = strlen(prefix) + strlen(suffix) + strlen(cur_path) + 1 ;

  ret=xmalloc(output_len);
  snprintf(ret,output_len,"%s%s%s",prefix,cur_path,suffix);
  free(cur_path);
  return ret;
}
Exemplo n.º 7
0
void ResourceFinder::findInBinDir(const char* filename)
{
  char buf[1024], path[1024];

  get_executable_name(path, sizeof(path));
  replace_filename(buf, path, filename, sizeof(buf));

  addPath(buf);
}
Exemplo n.º 8
0
std::string redir(const std::string &filename)
{
  char exe[1024], buf[1024];

  get_executable_name(exe, sizeof(exe));
  replace_filename(buf, exe, filename.c_str(), sizeof(buf));

  return std::string(buf);
}
Exemplo n.º 9
0
void
usage() {
  printf(
    "Set OpenFlow Switch Manager/Daemon event forward entries.\n"
    " Switch Manager: %s -m -t EVENT_TYPE service_name1,service_name2,...\n"
    " Switch Daemon : %s -s SWITCH_DPID -t EVENT_TYPE service_name1,service_name2,...\n"
    "\n"
    " EVENT_TYPE:\n"
    "  -t, --type={vendor,packet_in,port_status,state_notify} Specify event type.\n"
    " TREMA COMMON:\n"
    "  -n, --name=SERVICE_NAME         service name\n"
    "  -d, --daemonize                 run in the background\n"
    "  -l, --logging_level=LEVEL       set logging level\n"
    "  -g, --syslog                    output log messages to syslog\n"
    "  -f, --logging_facility=FACILITY set syslog facility\n"
    "  -h, --help                      display this help and exit\n"
    , get_executable_name()
    , get_executable_name()
  );
}
Exemplo n.º 10
0
/* create_directx_window:
 *  Creates the Allegro window.
 */
static HWND create_directx_window(void)
{
   static int first = 1;
   WNDCLASS wnd_class;
   char fname[1024];
   HWND wnd;

   if (first) {
      /* setup the window class */
      wnd_class.style = CS_HREDRAW | CS_VREDRAW;
      wnd_class.lpfnWndProc = directx_wnd_proc;
      wnd_class.cbClsExtra = 0;
      wnd_class.cbWndExtra = 0;
      wnd_class.hInstance = allegro_inst;
      wnd_class.hIcon = LoadIcon(allegro_inst, "allegro_icon");
      if (!wnd_class.hIcon)
         wnd_class.hIcon = LoadIcon(NULL, IDI_APPLICATION);
      wnd_class.hCursor = LoadCursor(NULL, IDC_ARROW);
      wnd_class.hbrBackground = NULL;
      wnd_class.lpszMenuName = NULL;
      wnd_class.lpszClassName = ALLEGRO_WND_CLASS;

      RegisterClass(&wnd_class);

      /* what are we called? */
      get_executable_name(fname, sizeof(fname));
      ustrlwr(fname);

      usetc(get_extension(fname), 0);
      if (ugetat(fname, -1) == '.')
         usetat(fname, -1, 0);

      do_uconvert(get_filename(fname), U_CURRENT, wnd_title, U_ASCII, WND_TITLE_SIZE);

      first = 0;
   }

   /* create the window now */
   wnd = CreateWindowEx(WS_EX_APPWINDOW, ALLEGRO_WND_CLASS, wnd_title,
                        WS_SYSMENU | WS_CAPTION | WS_MINIMIZEBOX,
                        -100, -100, 0, 0,
                        NULL, NULL, allegro_inst, NULL);
   if (!wnd) {
      _TRACE(PREFIX_E "CreateWindowEx() failed (%s)\n", win_err_str(GetLastError()));
      return NULL;
   }

   ShowWindow(wnd, SW_SHOWNORMAL);
   SetForegroundWindow(wnd);
   UpdateWindow(wnd);

   return wnd;
}
Exemplo n.º 11
0
bool init_gdb_crash_handler()
{
    if (sem_init(&g_sem_started, 0, 1) != 0 ||
        get_executable_name() != 0)
    {
        g_prepared = false;
        return false;
    }

    g_prepared = true;
    return true;
}
Exemplo n.º 12
0
void write_help(std::ostream &out) {
    out << "Usage: " << get_executable_name() << " " << internal::exe_usage
        << std::endl;
    out << internal::exe_description << std::endl;
    out << internal::flags << std::endl;
    if (internal::help_advanced) {
        out << "Advanced options:" << std::endl;
        out << internal::advanced_flags << std::endl;
    }
    out << "This program is part of IMP, the Integrative Modeling Platform,"
        << std::endl;
    out << "which is Copyright 2007-2016 IMP Inventors." << std::endl;
    out << "For additional information about IMP, "
        << "see <http://integrativemodeling.org>." << std::endl;
}
Exemplo n.º 13
0
void
usage() {
  printf(
	 "OpenFlow Switch Manager.\n"
	 "Usage: %s [OPTION]... [-- SWITCH_MANAGER_OPTION]...\n"
	 "\n"
	 "  -s, --switch=PATH           the command path of switch\n"
	 "  -n, --name=SERVICE_NAME     service name\n"
         "  -p, --port=PORT             server listen port (default %u)\n"
	 "  -d, --daemonize             run in the background\n"
	 "  -l, --logging_level=LEVEL   set logging level\n"
	 "  -h, --help                  display this help and exit\n"
	 , get_executable_name(), OFP_TCP_PORT
	 );
}
Exemplo n.º 14
0
void load_options(void)
{
	{
		char ef[256], cf[256];

		get_executable_name(ef, 256);
		replace_filename(cf, ef, "studio.ini", 256);

		set_config_file(cf);
	}

	opt.gfx_w = get_config_int("options", "gfx_w", DEF_GFX_W);
	opt.gfx_h = get_config_int("options", "gfx_h", DEF_GFX_H);

	atexit(&save_options);
}
Exemplo n.º 15
0
extern "C" void be_sys_message(AL_CONST char *msg)
{
    char  filename[MAXPATHLEN];
    char *title;
    char  tmp[ALLEGRO_MESSAGE_SIZE];
    char  tmp2[ALLEGRO_MESSAGE_SIZE];

    get_executable_name(filename, sizeof(filename));
    title = get_filename(filename);

    BAlert *alert = new BAlert(title,
                               uconvert(msg, U_CURRENT, tmp, U_UTF8, ALLEGRO_MESSAGE_SIZE),
                               uconvert(get_config_text("Ok"), U_CURRENT, tmp2, U_UTF8, ALLEGRO_MESSAGE_SIZE));
    alert->SetShortcut(0, B_ESCAPE);
    be_app->ShowCursor();
    alert->Go();
    be_app->HideCursor();
}
Exemplo n.º 16
0
void write_help(std::ostream &out) {
  /* Suppress usage if the caller already handles it
     (e.g. IMP.ArgumentParser Python class) */
  if (internal::exe_usage != "==SUPPRESS==") {
    out << "Usage: " << get_executable_name() << " " << internal::exe_usage
        << std::endl;
  }
  out << internal::exe_description << std::endl;
  out << internal::flags << std::endl;
  if (internal::help_advanced) {
    out << "Advanced options:" << std::endl;
    out << internal::advanced_flags << std::endl;
  }
  out << "This program is part of IMP, the Integrative Modeling Platform,"
      << std::endl;
  out << "which is Copyright 2007-2018 IMP Inventors." << std::endl;
  out << "For additional information about IMP, "
      << "see <https://integrativemodeling.org>." << std::endl;
}
Exemplo n.º 17
0
// Run an NSF, or a MIDI if the NSF is missing somehow.
bool try_zcmusic(char *filename, int track, int midi)
{
    ZCMUSIC *newzcmusic = NULL;
    
    // Try the ZC directory first
    {
        char exepath[2048];
        char musicpath[2048];
        get_executable_name(exepath, 2048);
        replace_filename(musicpath, exepath, filename, 2048);
        newzcmusic=(ZCMUSIC*)zcmusic_load_file(musicpath);
    }
    
    // Not in ZC directory, try the quest directory
    if(newzcmusic==NULL)
    {
        char musicpath[2048];
        replace_filename(musicpath, qstpath, filename, 2048);
        newzcmusic=(ZCMUSIC*)zcmusic_load_file(musicpath);
    }
    
    // Found it
    if(newzcmusic!=NULL)
    {
        zcmusic_stop(zcmusic);
        zcmusic_unload_file(zcmusic);
        stop_midi();
        
        zcmusic=newzcmusic;
        zcmusic_play(zcmusic, emusic_volume);
        
        if(track>0)
            zcmusic_change_track(zcmusic,track);
            
        return true;
    }
    
    // Not found, play MIDI - unless this was called by a script (yay, magic numbers)
    else if(midi>-1000)
        jukebox(midi);
        
    return false;
}
Exemplo n.º 18
0
void
usage() {
  printf(
	 "OpenFlow Packet in dispatcher.\n"
	 "Usage: %s [OPTION]... [PACKETIN-DISPATCH-RULE]...\n"
	 "\n"
	 "  -n, --name=SERVICE_NAME     service name\n"
	 "  -d, --daemonize             run in the background\n"
	 "  -l, --logging_level=LEVEL   set logging level\n"
	 "  -h, --help                  display this help and exit\n"
	 "\n"
	 "PACKETIN-DISPATCH-RULE:\n"
	 "  dispatch-type::destination-service-name\n"
	 "\n"
	 "dispatch-type:\n"
	 "  arp_or_unicast              arp or unicast packets\n"
	 "  broadcast                   broadcast (arp not include)\n"
	 "\n"
	 "destination-service-name      destination service name\n"
	 , get_executable_name()
	 );
}
Exemplo n.º 19
0
// Do whatever is necessary to locate an additional SimCoupe file - The Win32 version looks in the
// same directory as the EXE, but other platforms could use an environment variable, etc.
// If the path is already fully qualified (an OS-specific decision), return the same string
const char* OSD::GetFilePath (const char* pcszFile_/*=""*/)
{
    static char szPath[512], szExePath[MAX_PATH];

    // If the supplied file path looks absolute, use it as-is
    if (*pcszFile_ == PATH_SEPARATOR
#if defined(ALLEGRO_WINDOWS) || defined(ALLEGRO_DOS)
        || strchr(pcszFile_, ':')
#endif
        )
        strncpy(szPath, pcszFile_, sizeof szPath);

    // Form the full path relative to the current EXE file
    else
    {
        // Make sure Allegro is initialised, as get_executable_name() needs it
        if (!fAllegroInit && !szPath[0])
        {
            allegro_init();
            fAllegroInit = true;

            // Get the full path of the running module
            get_executable_name(szExePath, sizeof szExePath);

            // Strip the filename if a full path, otherwise use no path
            char* psz = strrchr(szExePath, PATH_SEPARATOR);
            if (psz)
                psz[1] = '\0';
            else
                szExePath[0] = '\0';
        }

        // Append the supplied file/path
        strcat(strcpy(szPath, szExePath), pcszFile_);
    }

    // Return a pointer to the new path
    return szPath;
}
Exemplo n.º 20
0
void
usage() {
  printf(
	 "OpenFlow Packet in Filter.\n"
	 "Usage: %s [OPTION]... [PACKETIN-FILTER-RULE]...\n"
	 "\n"
	 "  -n, --name=SERVICE_NAME     service name\n"
	 "  -d, --daemonize             run in the background\n"
	 "  -l, --logging_level=LEVEL   set logging level\n"
	 "  -h, --help                  display this help and exit\n"
	 "\n"
	 "PACKETIN-FILTER-RULE:\n"
	 "  match-type::destination-service-name\n"
	 "\n"
	 "match-type:\n"
	 "  lldp                        LLDP ethernet frame type and priority is 0x8000\n"
	 "  packet_in                   any packet and priority is zero\n"
	 "\n"
	 "destination-service-name      destination service name\n"
	 , get_executable_name()
	 );
}
Exemplo n.º 21
0
/**
 * @brief flushes the buffer
 *
 * This is the actual worker function. It opens the log file if it wasn't yet
 * open, composes the addr2line commandline, pipes the buffer through it and
 * writes the output of that - after some formatting - to the real logfile.
 */
void CLogger::FlushBuffer()
{
	char buf1[4096], buf2[4096];
	char* nl;

	// Open logfile if it's not open.

	if (!logfile) {
		assert(filename);
		if (!(logfile = fopen(filename, "a")))
			return;

		time_t t;
		time(&t);
		char* ct = ctime_r(&t, buf1);
		if ((nl = strchr(ct, '\n'))) *nl = 0;
		fprintf(logfile, "\n===> %s <===\n", ct);
	}

	// Get executable name if we didn't have it yet.

	if (exename.empty()) {
		get_executable_name(buf1, sizeof(buf1));
		int len = strlen(buf1);
		strncpy(buf2, buf1, sizeof(buf2));
		buf2[sizeof(buf2)-1] = '\0'; // make sure the string is terminated
		if (len > 4 && buf2[len-4] == '.')
			buf2[len-4] = 0;
		// Note: strncat: 3rd param: maximum number of characters to append
		STRNCAT(buf2, ".dbg", sizeof(buf2) - strlen(buf2) - 1);

		fprintf(logfile, "trying debug symbols file: '%s'\n", buf2);

		struct stat tmp;
		if (stat(buf2, &tmp) == 0) {
			exename = buf2;
		} else {
			exename = buf1;
		}

		if (exename.empty())
			return;
		fprintf(logfile, "executable name: '%s'\n", exename.c_str());
	}

	// Compose addr2line command.

	std::stringstream command;
	std::vector<std::string>::iterator it;
	bool runTheCommand = false;

	command << ADDR2LINE << " \"--exe=" << exename << "\" --functions --demangle --inline";

	for (it = buffer.begin(); it != buffer.end(); ++it) {
		const int open = it->find('{');
		const int close = it->find('}', open + 1);
		if (open != std::string::npos && close != std::string::npos) {
			command << " " << it->substr(open + 1, close - open - 1);
			runTheCommand = true;
		}
	}

	if (runTheCommand) {
		// We got some addresses, so run the addr2line command.
		// (This is usually the branch taken by the host)

		fprintf(logfile, "addr2line command : '%s'\n", command.str().c_str());

		// Open pipe to the addr2line command.

		FILE* p = popen(command.str().c_str(), "r");

		if (!p) {
			fprintf(logfile, "  %s\n", strerror(errno));
			runTheCommand = false;
		} else {
			// Pipe the buffer through the addr2line command.
			for (it = buffer.begin(); it != buffer.end(); ++it) {
				const int open = it->find('{');
				const int close = it->find('}', open + 1);
				if (open != std::string::npos && close != std::string::npos) {
					fgets(buf1, sizeof(buf1), p);
					fgets(buf2, sizeof(buf2), p);
					CppFilt(buf1, sizeof(buf1));
					if ((nl = strchr(buf1, '\n'))) *nl = 0;
					if ((nl = strchr(buf2, '\n'))) *nl = 0;
					fprintf(logfile, "%s%s [%s]%s\n", it->substr(0, open).c_str(), buf1, buf2, it->substr(close + 1).c_str());
				} else {
					fprintf(logfile, "%s\n", it->c_str());
				}
			}

			// Close pipe & clear buffer.
			pclose(p);
		}
	}

	if (!runTheCommand) {
		// Just dump the buffer to the file.
		// (this is usually the branch taken by the clients)
		for (it = buffer.begin(); it != buffer.end(); ++it) {
			fprintf(logfile, "%s\n", it->c_str());
		}
	}

	buffer.clear();
}
Exemplo n.º 22
0
void
usage() {
  topology_service_interface_usage( get_executable_name(), "Sliceable switch.", option_description );
}
Exemplo n.º 23
0
void
usage() {
  printf( "Usage: %s COUNT\n", get_executable_name() );
}
Exemplo n.º 24
0
void
usage() {
  topology_service_interface_usage( get_executable_name(), "list port", NULL );
}
Exemplo n.º 25
0
int eof_add_silence(char * oggfn, unsigned long ms)
{
	char sys_command[1024] = {0};
	char backupfn[1024] = {0};	//The file path of the backup of the target audio file
	char wavfn[1024] = {0};		//The file path of the silent WAV file created
	char soggfn[1024] = {0};	//The file path of the silent OGG file created
	char oggcfn[1024] = {0};	//The file path to the oggCat utility
	char old_wd[1024] = {0};	//Store working directory before changing it so we can get back
	char *rel_oggfn;			//Relative file path to the target audio file
	char *rel_backupfn;			//Relative file path to the backup of the target audio file
	SAMPLE * silence_sample;
	int retval;

	if(!oggfn || (ms == 0) || eof_silence_loaded)
	{
		return 1;	//Return error:  Invalid parameters
	}

 	eof_log("eof_add_silence() entered", 1);

	set_window_title("Adjusting Silence...");

	/* back up original file */
	(void) snprintf(backupfn, sizeof(backupfn) - 1, "%s.backup", oggfn);
	if(!exists(backupfn))
	{
		(void) eof_copy_file(oggfn, backupfn);
	}
	(void) delete_file(oggfn);

	silence_sample = create_silence_sample(ms);
	if(!silence_sample)
	{
		eof_fix_window_title();
		return 2;	//Return error:  Couldn't create silent audio
	}
	(void) replace_filename(wavfn, eof_song_path, "silence.wav", 1024);
	(void) save_wav(wavfn, silence_sample);
	destroy_sample(silence_sample);
	(void) replace_filename(soggfn, eof_song_path, "silence.ogg", 1024);
	#ifdef ALLEGRO_WINDOWS
		(void) uszprintf(sys_command, (int) sizeof(sys_command) - 1, "oggenc2 -o \"%s\" -b %d \"%s\"", soggfn, alogg_get_bitrate_ogg(eof_music_track) / 1000, wavfn);
	#else
		(void) uszprintf(sys_command, (int) sizeof(sys_command) - 1, "oggenc -o \"%s\" -b %d \"%s\"", soggfn, alogg_get_bitrate_ogg(eof_music_track) / 1000, wavfn);
	#endif
	if(eof_system(sys_command))
	{
		eof_fix_window_title();
		return 3;	//Return error:  Could not encode silent audio
	}

	/* stitch the original file to the silence file */
	if(!getcwd(old_wd, 1024))
	{	//If the current working directory could not be obtained
		eof_fix_window_title();
		return 4;	//Return error:  Could not obtain current working directory
	}

	(void) eof_chdir(eof_song_path);	//Change directory to the project's folder, since oggCat does not support paths that have any Unicode/extended ASCII, relative paths will be given
	#ifdef ALLEGRO_WINDOWS
		get_executable_name(oggcfn, 1024);
		(void) replace_filename(oggcfn, oggcfn, "oggCat.exe", 1024);	//Build the full path to oggCat
	#else
		ustrzcpy(oggcfn, 1024, "oggCat");
	#endif
	rel_oggfn = get_filename(oggfn);		//Get the relative path to the target OGG file
	rel_backupfn = get_filename(backupfn);	//Get the relative path to the backup of the target OGG file
	//Call oggCat while the current working directory is the project folder.  This way, if the project folder's path contains any Unicode or extended ASCII, oggCat won't fail
	#ifdef ALLEGRO_WINDOWS
		//For some reason, the Windows build needs extra quotation marks to enclose the entire command if the command begins with a full executable path in quote marks
		(void) uszprintf(sys_command, (int) sizeof(sys_command) - 1, "\"\"%s\" \"%s\" \"silence.ogg\" \"%s\"\"", oggcfn, rel_oggfn, rel_backupfn);
	#else
		(void) uszprintf(sys_command, (int) sizeof(sys_command) - 1, "\"%s\" \"%s\" \"silence.ogg\" \"%s\"", oggcfn, rel_oggfn, rel_backupfn);	//Use oggCat to overwrite the target OGG file with the silent audio concatenated with the backup of the target OGG file
	#endif
	retval = eof_system(sys_command);

	/* change back to the program folder */
	if(eof_chdir(old_wd))
	{
		allegro_message("Could not change directory to EOF's program folder!\n%s", backupfn);
		return 5;	//Return error:  Could not set working directory
	}

	if(retval)
	{	//If the command failed
		(void) snprintf(eof_log_string, sizeof(eof_log_string) - 1, "\tError issuing command \"%s\" from path \"%s\"", sys_command, eof_song_path);
		eof_log(eof_log_string, 1);
		(void) eof_copy_file(backupfn, oggfn);	//Restore the original OGG file
		eof_fix_window_title();
		return 6;	//Return error:  oggCat failed
	}

	/* clean up */
	(void) delete_file(wavfn);	//Delete silence.wav
	(void) delete_file(soggfn);	//Delete silence.ogg
	if(eof_load_ogg(oggfn, 0))
	{	//If the combined audio was loaded
		eof_fix_waveform_graph();
		eof_fix_spectrogram();
		eof_fix_window_title();
		eof_chart_length = eof_music_length;
		return 0;	//Return success
	}
	eof_fix_window_title();

	//If this part of the function is reached, the OGG failed to load
	if(exists(oggfn))
		return 7;	//Return error:  Could not load new audio, but audio file exists

	return 8;	//Return error:  Could not load new audio, file does not exist
}
Exemplo n.º 26
0
int main(int argc, char *argv[])
{
   int c, w, h;
   char buf[256], buf2[256];
   ANIMATION_TYPE type;

   for (c = 1; c < argc; c++) {
      if (stricmp(argv[c], "-cheat") == 0)
         cheat = TRUE;

      if (stricmp(argv[c], "-jumpstart") == 0)
         jumpstart = TRUE;
   }

   /* The fonts we are using don't contain the full latin1 charset (not to
    * mention Unicode), so in order to display correctly author names in
    * the credits with 8-bit characters, we will convert them down to 7
    * bits with a custom mapping table. Fortunately, Allegro comes with a
    * default custom mapping table which reduces Latin-1 and Extended-A
    * characters to 7 bits. We don't even need to call set_ucodepage()!
    */
   set_uformat(U_ASCII_CP);
   
   srand(time(NULL));
   if (allegro_init() != 0)
      return 1;
   install_keyboard();
   install_timer();
   install_mouse();

   if (install_sound(DIGI_AUTODETECT, MIDI_AUTODETECT, NULL) != 0) {
      allegro_message("Error initialising sound\n%s\n", allegro_error);
      install_sound(DIGI_NONE, MIDI_NONE, NULL);
   }

   if (install_joystick(JOY_TYPE_AUTODETECT) != 0) {
      allegro_message("Error initialising joystick\n%s\n", allegro_error);
      install_joystick(JOY_TYPE_NONE);
   }

   if (set_gfx_mode(GFX_AUTODETECT, 320, 200, 0, 0) != 0) {
      if (set_gfx_mode(GFX_SAFE, 320, 200, 0, 0) != 0) {
         set_gfx_mode(GFX_TEXT, 0, 0, 0, 0);
         allegro_message("Unable to set any graphic mode\n%s\n",
                         allegro_error);
         return 1;
      }
   }

   get_executable_name(buf, sizeof(buf));
   replace_filename(buf2, buf, "demo.dat", sizeof(buf2));
   set_color_conversion(COLORCONV_NONE);
   data = load_datafile(buf2);
   if (!data) {
      set_gfx_mode(GFX_TEXT, 0, 0, 0, 0);
      allegro_message("Error loading %s\n", buf2);
      exit(1);
   }

   if (!jumpstart) {
      intro_screen();
   }

   clear_bitmap(screen);
   set_gui_colors();
   set_mouse_sprite(NULL);

   if (!gfx_mode_select(&c, &w, &h))
      exit(1);

   if (pick_animation_type(&type) < 0)
      exit(1);

   init_display(c, w, h, type);

   generate_explosions();

   //stop_sample(data[INTRO_SPL].dat);

   clear_bitmap(screen);

   while (title_screen())
      play_game();

   destroy_display();

   destroy_explosions();

   stop_midi();

   set_gfx_mode(GFX_TEXT, 0, 0, 0, 0);

   end_title();

   unload_datafile(data);

   allegro_exit();

   return 0;
}
Exemplo n.º 27
0
void initpc()
{
    char *p;
//        allegro_init();
    get_executable_name(pcempath,511);
    pclog("executable_name = %s\n", pcempath);
    p=get_filename(pcempath);
    *p=0;
    pclog("path = %s\n", pcempath);

    fdd_init();
    keyboard_init();
    mouse_init();
    joystick_init();
    midi_init();

    loadconfig(NULL);
    pclog("Config loaded\n");

    loadfont("mda.rom", 0, cga_fontdat, cga_fontdatm);
    loadfont("roms/pc1512/40078.ic127", 0, pc1512_fontdat, pc1512_fontdatm);
    loadfont("roms/pc200/40109.bin", 0, pc200_fontdat, pc200_fontdatm);

    codegen_init();

    cpuspeed2=(AT)?2:1;
//        cpuspeed2=cpuspeed;
    atfullspeed=0;

    device_init();

    initvideo();
    mem_init();
    loadbios();
    mem_add_bios();

    timer_reset();
    sound_reset();
    fdc_init();
// #ifdef USE_NETWORKING
    vlan_reset();	//NETWORK
    network_card_init(network_card_current);
// #endif

    loaddisc(0,discfns[0]);
    loaddisc(1,discfns[1]);

    //loadfont();
    loadnvr();
    sound_init();
    resetide();
#if __unix
    if (cdrom_drive == -1)
        cdrom_null_open(cdrom_drive);
    else
#endif
        ioctl_open(cdrom_drive);

    pit_reset();
    /*        if (romset==ROM_AMI386 || romset==ROM_AMI486) */fullspeed();
    ali1429_reset();
//        CPUID=(is486 && (cpuspeed==7 || cpuspeed>=9));
//        pclog("Init - CPUID %i %i\n",CPUID,cpuspeed);
    shadowbios=0;

#if __unix
    if (cdrom_drive == -1)
        cdrom_null_reset();
    else
#endif
        ioctl_reset();
}
Exemplo n.º 28
0
void play_DmapMusic()
{
    static char tfile[2048];
    static int ttrack=0;
    bool domidi=false;
    
    // Seems like this ought to call try_zcmusic()...
    
    if(DMaps[currdmap].tmusic[0]!=0)
    {
        if(zcmusic==NULL ||
           strcmp(zcmusic->filename,DMaps[currdmap].tmusic)!=0 ||
           (zcmusic->type==ZCMF_GME && zcmusic->track != DMaps[currdmap].tmusictrack))
        {
            if(zcmusic != NULL)
            {
                zcmusic_stop(zcmusic);
                zcmusic_unload_file(zcmusic);
                zcmusic = NULL;
            }
            
            // Try the ZC directory first
            {
                char exepath[2048];
                char musicpath[2048];
                get_executable_name(exepath, 2048);
                replace_filename(musicpath, exepath, DMaps[currdmap].tmusic, 2048);
                zcmusic=(ZCMUSIC*)zcmusic_load_file(musicpath);
            }
            
            // Not in ZC directory, try the quest directory
            if(zcmusic==NULL)
            {
                char musicpath[2048];
                replace_filename(musicpath, qstpath, DMaps[currdmap].tmusic, 2048);
                zcmusic=(ZCMUSIC*)zcmusic_load_file(musicpath);
            }
            
            if(zcmusic!=NULL)
            {
                stop_midi();
                strcpy(tfile,DMaps[currdmap].tmusic);
                zcmusic_play(zcmusic, emusic_volume);
                int temptracks=0;
                temptracks=zcmusic_get_tracks(zcmusic);
                temptracks=(temptracks<2)?1:temptracks;
                ttrack = vbound(DMaps[currdmap].tmusictrack,0,temptracks-1);
                zcmusic_change_track(zcmusic,ttrack);
            }
            else
            {
                tfile[0] = 0;
                domidi=true;
            }
        }
    }
    else
    {
        domidi=true;
    }
    
    if(domidi)
    {
        int m=DMaps[currdmap].midi;
        
        switch(m)
        {
        case 1:
            jukebox(ZC_MIDI_OVERWORLD);
            break;
            
        case 2:
            jukebox(ZC_MIDI_DUNGEON);
            break;
            
        case 3:
            jukebox(ZC_MIDI_LEVEL9);
            break;
            
        default:
            if(m>=4 && m<4+MAXCUSTOMMIDIS)
                jukebox(m-4+ZC_MIDI_COUNT);
            else
                music_stop();
        }
    }
}
Exemplo n.º 29
0
Arquivo: win.c Projeto: hoglet67/b-em
int WINAPI WinMain (HINSTANCE hThisInstance,
                    HINSTANCE hPrevInstance,
                    LPSTR lpszArgument,
                    int nFunsterStil)

{
        HWND hwnd;               /* This is the handle for our window */
        MSG messages;            /* Here messages to the application are saved */
        WNDCLASSEX wincl;        /* Data structure for the windowclass */
        int c;
        int oldf = 0;
        char *p;

        for (c = 0; c < 128; c++) keylookup[c] = c;

        processcommandline();

        hinstance = hThisInstance;
        /* The Window structure */
        wincl.hInstance = hThisInstance;
        wincl.lpszClassName = szClassName;
        wincl.lpfnWndProc = WindowProcedure;      /* This function is called by windows */
        wincl.style = CS_DBLCLKS;                 /* Catch double-clicks */
        wincl.cbSize = sizeof (WNDCLASSEX);

        /* Use default icon and mouse-pointer */
        wincl.hIcon = LoadIcon(hThisInstance, "allegro_icon");
        wincl.hIconSm = LoadIcon(hThisInstance, "allegro_icon");
        wincl.hCursor = LoadCursor (NULL, IDC_ARROW);
        wincl.lpszMenuName = NULL;                 /* No menu */
        wincl.cbClsExtra = 0;                      /* No extra bytes after the window class */
        wincl.cbWndExtra = 0;                      /* structure or the window instance */
        /* Use Windows's default color as the background of the window */
        wincl.hbrBackground = (HBRUSH) COLOR_BACKGROUND;

        /* Register the window class, and if it fails quit the program */
        if (!RegisterClassEx (&wincl))
           return 0;

        /* The class is registered, let's create the program*/
        hwnd = CreateWindowEx (
           0,                   /* Extended possibilites for variation */
           szClassName,         /* Classname */
           VERSION_STR,         /* Title Text */
           WS_OVERLAPPEDWINDOW/*&~WS_SIZEBOX&~WS_THICKFRAME&~WS_MAXIMIZEBOX*/, /* default window */
           CW_USEDEFAULT,       /* Windows decides the position */
           CW_USEDEFAULT,       /* where the window ends up on the screen */
           640 + (GetSystemMetrics(SM_CXFIXEDFRAME) * 2),                 /* The programs width */
           480 + (GetSystemMetrics(SM_CYFIXEDFRAME) * 2) + GetSystemMetrics(SM_CYMENUSIZE) + GetSystemMetrics(SM_CYCAPTION) + 1,                 /* and height in pixels */
           HWND_DESKTOP,        /* The window is a child-window to desktop */
           LoadMenu(hThisInstance, TEXT("MainMenu")),                /* No menu */
           hThisInstance,       /* Program Instance handler */
           NULL                 /* No Window Creation data */
           );

        ghwnd = hwnd;

        win_set_window(hwnd);

        allegro_init();

        get_executable_name(exedir, 511);
        p = get_filename(exedir);
        p[0] = 0;

        config_load();

        InitializeCriticalSection(&cs);

        /* Make the window visible on the screen */
        ShowWindow (hwnd, nFunsterStil);

        initmenu();

        mainthread = (HANDLE)_beginthread(_mainthread, 0, NULL);

        updatewindowtitle();


        /* Run the message loop. It will run until GetMessage() returns 0 */
        while (!quited)
        {
//                runbbc();
                if (PeekMessage(&messages, NULL, 0, 0, PM_REMOVE))
                {
                        if (messages.message == WM_QUIT)
                        {
                                quited=1;
                        }
                        TranslateMessage(&messages);
                        DispatchMessage(&messages);
                }
                else
                   Sleep(10);
                if ((key[KEY_LCONTROL] || key[KEY_RCONTROL]) && key[KEY_END] && mousecapture)
                {
                        ClipCursor(&oldclip);
                        mousecapture = 0;
                        updatewindowtitle();
                }
                if (key[KEY_ALT] && key[KEY_ENTER] && fullscreen && !oldf)
                {
                        EnterCriticalSection(&cs);
                        fullscreen = 0;
                        video_leavefullscreen();
                        LeaveCriticalSection(&cs);
                }
                else if (key[KEY_ALT] && key[KEY_ENTER] && !fullscreen && !oldf)
                {
                        EnterCriticalSection(&cs);
                        fullscreen = 1;
                        video_enterfullscreen();
                        LeaveCriticalSection(&cs);
                }
                oldf = key[KEY_ALT] && key[KEY_ENTER];
        }

        EnterCriticalSection(&cs);
        TerminateThread(mainthread, 0);
        main_close();
        DeleteCriticalSection(&cs);

        return messages.wParam;
}
Exemplo n.º 30
0
/**
 * Prepares command line arguments
 */
int parseargs(int* out_argc, char*** out_args) {

	// get argument line from system
	char* unparsedCommandLine = (char*) malloc(G_CLIARGS_BUFFER_LENGTH);
	if (unparsedCommandLine == NULL) {
		return -1;
	}
	g_cli_args_release(unparsedCommandLine);

	// count arguments
	char* pos = unparsedCommandLine;
	int argc = 1;
	while (*pos) {
		SKIP_WHITESPACE(pos);
		SKIP_ARGUMENT(pos);
		++argc;
	}

	// create argument array
	char** argv = (char**) malloc(sizeof(char*) * (argc + 1));
	if (argv == NULL) {
		return -1;
	}

	// put executable path as first argument
	argv[0] = get_executable_name();

	pos = unparsedCommandLine;
	int argpp = 1;
	while (*pos) {
		SKIP_WHITESPACE(pos);
		argv[argpp++] = pos;
		SKIP_ARGUMENT(pos);
		if (*pos == 0) {
			break;
		}
		*pos++ = 0;
	}

	argv[argpp] = 0;

	// clean up arguments
	for (int i = 1; i < argc; i++) {
		char* arg = argv[i];
		size_t arglen = strlen(arg);

		bool esc = false;
		for (int p = 0; p < arglen; p++) {

			if (!esc && arg[p] == '\\') {
				for (int x = p; x < arglen; x++) {
					arg[x] = arg[x + 1];
				}
				arglen--;
				--p; // repeat on same position
				esc = true;

			} else if (!esc && arg[p] == '"') {
				for (int x = p; x < arglen; x++) {
					arg[x] = arg[x + 1];
				}
				arglen--;
				--p; // repeat on same position
				esc = false;

			} else {
				esc = false;
			}
		}
	}

	// write out parameters
	*out_argc = argc;
	*out_args = argv;

	return 0;
}