void inputGinputFetcher(RadInputConfig* config, RadInputState* state)
{
if (state->is_enabled == 1) {
// Initialization
ginputGetMouse(0);
state->is_enabled = 2;
state->encoder.last_time = chTimeNow();
}
ginputGetMouseStatus(0, &config->ginput.event);
uint8_t is_down = (config->ginput.event.current_buttons & config->ginput.button_mask) ? 1 : 0;
state->encoder.value = config->ginput.event.x / 2;
if (abs((int)state->encoder.value - state->encoder.last_value) > 50)
state->encoder.last_value = state->encoder.value;
// Modifying the state of the next channel: button channel
RadInputState* state_button = state + 1;
if (is_down)
{
if (!state_button->button.is_down) {
state_button->button.is_down = 1;
state_button->button.times++;
}
} else {
state_button->button.is_down = 0;
}
}
void _gwidgetInit(void)
{
geventListenerInit(&gl);
geventRegisterCallback(&gl, gwidgetEvent, 0);
geventAttachSource(&gl, ginputGetMouse(GMOUSE_ALL_INSTANCES), GLISTEN_MOUSEMETA|GLISTEN_MOUSEDOWNMOVES);
#if GINPUT_NEED_KEYBOARD
geventAttachSource(&gl, ginputGetKeyboard(GKEYBOARD_ALL_INSTANCES), GLISTEN_KEYUP);
#endif
}
static DECLARE_THREAD_FUNCTION(NetThread, param) {
GEventMouse *pem;
uint16_t cmd[2];
uint16_t lbuttons;
coord_t lx, ly;
(void) param;
// Initialize the mouse and the listener.
geventListenerInit(&gl);
geventAttachSource(&gl, ginputGetMouse(0), GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
lbuttons = 0;
lx = ly = -1;
while(1) {
// Get a (mouse) event
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
if (pem->type != GEVENT_MOUSE && pem->type != GEVENT_TOUCH)
continue;
// Nothing to do if the socket is not open
if (netfd == (SOCKET)-1)
continue;
// Nothing to do if the mouse data has not changed
if (lx == pem->x && ly == pem->y && lbuttons == pem->current_buttons)
continue;
// Transfer mouse data that has changed
if (lx != pem->x) {
lx = pem->x;
cmd[0] = GNETCODE_MOUSE_X;
cmd[1] = lx;
sendpkt(cmd, 2);
}
if (ly != pem->y) {
ly = pem->y;
cmd[0] = GNETCODE_MOUSE_Y;
cmd[1] = ly;
sendpkt(cmd, 2);
}
// We always send the buttons as it also acts as a mouse sync signal
lbuttons = pem->current_buttons;
cmd[0] = GNETCODE_MOUSE_B;
cmd[1] = lbuttons;
sendpkt(cmd, 2);
}
return 0;
}
int main(void) {
color_t color = Black;
uint16_t pen = 0;
halInit();
chSysInit();
gdispInit();
ginputGetMouse(0);
gdispSetOrientation(GDISP_ROTATE_90);
drawScreen();
while (TRUE) {
ginputGetMouseStatus(0, &ev);
if (!(ev.current_buttons & GINPUT_MOUSE_BTN_LEFT))
continue;
/* inside color box ? */
if(ev.y >= OFFSET && ev.y <= COLOR_SIZE) {
if(GET_COLOR(0)) color = Black;
else if(GET_COLOR(1)) color = Red;
else if(GET_COLOR(2)) color = Yellow;
else if(GET_COLOR(3)) color = Green;
else if(GET_COLOR(4)) color = Blue;
else if(GET_COLOR(5)) color = White;
/* inside pen box ? */
} else if(ev.x >= OFFSET && ev.x <= PEN_SIZE) {
if(GET_PEN(1)) pen = 0;
else if(GET_PEN(2)) pen = 1;
else if(GET_PEN(3)) pen = 2;
else if(GET_PEN(4)) pen = 3;
else if(GET_PEN(5)) pen = 4;
/* inside drawing area ? */
} else if(DRAW_AREA(ev.x, ev.y)) {
if(pen == 0)
gdispDrawPixel(ev.x, ev.y, color);
else
gdispFillCircle(ev.x, ev.y, pen, color);
}
}
}
void I_InitGraphics(void)
{
screens[0] = gfxAlloc(SCREENWIDTH*SCREENHEIGHT);
multiply = 1;
if (M_CheckParm("-2") || (gdispGetWidth() >= SCREENWIDTH*2 && gdispGetHeight() >= SCREENHEIGHT*2))
multiply = 2;
w = gdispGetWidth()/multiply;
if (w > SCREENWIDTH) w = SCREENWIDTH;
ldiff = SCREENWIDTH - w;
h = gdispGetHeight()/multiply;
if (h > SCREENHEIGHT) h = SCREENHEIGHT;
#if GFX_USE_GINPUT && GINPUT_NEED_MOUSE
ginputGetMouse(0);
#endif
}
int main(void)
{
GEventMouse ev;
#if !JG10_SHOW_SPLASH
font_t font;
#endif
gfxInit();
ginputGetMouse(0);
jg10Init();
#if JG10_SHOW_SPLASH
jg10ShowSplash();
#else
font = gdispOpenFont("DejaVuSans16_aa");
gdispDrawString((gdispGetWidth()/2)-(gdispGetStringWidth("Touch to start!", font)/2), gdispGetHeight()/2, "Touch to start!", font, White);
gdispCloseFont(font);
#endif
while (TRUE) {
ginputGetMouseStatus(0, &ev);
if (ev.buttons & GINPUT_MOUSE_BTN_LEFT) {
while (ev.buttons & GINPUT_MOUSE_BTN_LEFT) { // Wait until release
ginputGetMouseStatus(0, &ev);
}
#if !JG10_SHOW_SPLASH
font = gdispOpenFont("DejaVuSans16");
gdispFillArea((gdispGetWidth()/2)-(gdispGetStringWidth("Touch to start!", font)/2), gdispGetHeight()/2, gdispGetWidth()/2, 17, Black);
gdispCloseFont(font);
#endif
jg10Start();
}
}
}
/*------------------------------------------------------------------------*
* GINPUT Touch Driver Calibrator. *
*------------------------------------------------------------------------*/
int main(void) {
GSourceHandle gs, gsNext, gsPrev;
GEvent *pe;
GEventMouse *pem;
GEventGWinButton *peb;
coord_t swidth, sheight;
GHandle ghc, ghNext, ghPrev;
BaseSequentialStream *gp;
GEventType deviceType;
font_t font;
halInit(); // Initialise the Hardware
chSysInit(); // Initialize the OS
gdispInit(); // Initialize the display
// Get the display dimensions
swidth = gdispGetWidth();
sheight = gdispGetHeight();
ghNext = ghPrev = 0;
// Create our title
font = gdispOpenFont("UI2");
gdispFillStringBox(0, 0, swidth, 20, "Touch Calibration", font, Red, White, justifyLeft);
// Create our main display window
ghc = gwinCreateConsole(&gc, 0, 20, swidth, sheight-20, font);
gwinClear(ghc);
gp = gwinGetConsoleStream(ghc);
// Initialize the mouse in our special no calibration mode.
geventListenerInit(&gl);
gs = ginputGetMouse(9999);
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
/*
* Test: Device Type
*/
StepDeviceType:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
chprintf(gp, "\n1. DEVICE TYPE\n\n");
pem = (GEventMouse *)&gl.event;
ginputGetMouseStatus(0, pem);
deviceType = pem->type;
gwinSetColor(ghc, White);
chprintf(gp, "This is detected as a %s device\n\n",
deviceType == GEVENT_MOUSE ? "MOUSE" : (pem->type == GEVENT_TOUCH ? "TOUCH" : "UNKNOWN"));
if (ghNext)
chprintf(gp, "Press Next or Back to continue.\n");
else if (deviceType == GEVENT_MOUSE)
chprintf(gp, "Click the mouse button to move on to the next test.\n");
else
chprintf(gp, "Press and release your finger to move on to the next test.\n");
while(1) {
pe = geventEventWait(&gl, TIME_INFINITE);
if (pe->type == GEVENT_GWIN_BUTTON) {
peb = (GEventGWinButton *)pe;
if (peb->button == ghPrev)
goto StepClickJitter;
if (peb->button == ghNext)
break;
}
if (pe->type == GEVENT_MOUSE || pe->type == GEVENT_TOUCH) {
pem = (GEventMouse *)pe;
if (!ghNext && (pem->meta & GMETA_MOUSE_UP))
break;
}
}
/*
* Test: Mouse raw reading jitter
*/
StepRawJitter:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
chprintf(gp, "\n2. GINPUT_MOUSE_READ_CYCLES\n\n");
gwinSetColor(ghc, White);
if (deviceType == GEVENT_MOUSE)
chprintf(gp, "Press and hold the mouse button.\n\n");
else
chprintf(gp, "Press and hold on the surface.\n\n");
chprintf(gp, "Numbers will display in this window.\n"
"Ensure that values don't jump around very much when your finger is stationary.\n\n"
"Increasing GINPUT_MOUSE_READ_CYCLES helps reduce jitter but increases CPU usage.\n\n");
if (ghNext)
chprintf(gp, "Press Next or Back to continue.\n");
else if (deviceType == GEVENT_MOUSE)
chprintf(gp, "Release the mouse button to move on to the next test.\n");
else
chprintf(gp, "Release your finger to move on to the next test.\n");
// For this test turn on ALL mouse movement events
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA|GLISTEN_MOUSENOFILTER);
while(1) {
pe = geventEventWait(&gl, TIME_INFINITE);
if (pe->type == GEVENT_GWIN_BUTTON) {
peb = (GEventGWinButton *)pe;
if (peb->button == ghPrev)
goto StepDeviceType;
if (peb->button == ghNext)
break;
}
if (pe->type == GEVENT_MOUSE || pe->type == GEVENT_TOUCH) {
pem = (GEventMouse *)pe;
if ((pem->current_buttons & GINPUT_MOUSE_BTN_LEFT))
chprintf(gp, "%u:%u\n", pem->x, pem->y);
if (!ghNext && (pem->meta & GMETA_MOUSE_UP))
break;
}
}
// Reset to just changed movements.
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
/*
* Test: Calibration
*/
StepCalibrate:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
chprintf(gp, "\n3. GINPUT_MOUSE_CALIBRATION_ERROR\n\n");
gwinSetColor(ghc, Gray);
chprintf(gp, "Ensure GINPUT_MOUSE_NEED_CALIBRATION = TRUE and GINPUT_MOUSE_CALIBRATION_ERROR is >= 0\n\n");
gwinSetColor(ghc, White);
chprintf(gp, "You will be presented with a number of points to touch.\nPress them in turn.\n\n"
"If the calibration repeatedly fails, increase GINPUT_MOUSE_CALIBRATION_ERROR and try again.\n\n");
if (ghNext)
chprintf(gp, "Press Next to start the calibration.\n");
else if (deviceType == GEVENT_MOUSE)
chprintf(gp, "Click the mouse button to start the calibration.\n");
else
chprintf(gp, "Press and release your finger to start the calibration.\n");
while(1) {
pe = geventEventWait(&gl, TIME_INFINITE);
if (pe->type == GEVENT_GWIN_BUTTON) {
peb = (GEventGWinButton *)pe;
if (peb->button == ghPrev)
goto StepRawJitter;
if (peb->button == ghNext)
break;
}
if (pe->type == GEVENT_MOUSE || pe->type == GEVENT_TOUCH) {
pem = (GEventMouse *)pe;
if (!ghNext && (pem->meta & GMETA_MOUSE_UP))
break;
}
}
// Calibrate
ginputCalibrateMouse(0);
/* From now on we can use Next and Previous Buttons */
if (!ghNext) {
ghNext = gwinCreateButton(&gNext, swidth-50, 0, 50, 20, font, GBTN_NORMAL);
gwinSetButtonText(ghNext, "Next", FALSE);
gsNext = gwinGetButtonSource(ghNext);
geventAttachSource(&gl, gsNext, 0);
gwinAttachButtonMouseSource(ghNext, gs);
ghPrev = gwinCreateButton(&gPrev, swidth-100, 0, 50, 20, font, GBTN_NORMAL);
gwinSetButtonText(ghPrev, "Back", FALSE);
gsPrev = gwinGetButtonSource(ghPrev);
geventAttachSource(&gl, gsPrev, 0);
gwinAttachButtonMouseSource(ghPrev, gs);
#if 0
{
GSourceHandle gsButton1, gsButton2;
// Attach a couple of hardware toggle buttons to our Next and Back buttons as well.
// We can always use the mouse to trigger the buttons if you don't want to use hardware toggles.
// This code depends on your hardware. Turn it on only if you have
// defined a board definition for your toggle driver. Then change
// the next two lines to be correct for your hardware. The values
// below are correct for the Win32 toggle driver.
gsButton1 = ginputGetToggle(GINPUT_TOGGLE_MOMENTARY1);
gsButton2 = ginputGetToggle(GINPUT_TOGGLE_MOMENTARY2);
gwinAttachButtonToggleSource(ghNext, gsButton2);
gwinAttachButtonToggleSource(ghPrev, gsButton1);
}
#endif
}
// Calibration used the whole screen - re-establish our title
gdispFillStringBox(0, 0, swidth, 20, "Touch Calibration", font, Green, White, justifyLeft);
gwinButtonDraw(ghNext);
gwinButtonDraw(ghPrev);
/*
* Test: Mouse movement jitter
*/
StepJitter:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
chprintf(gp, "\n4. GINPUT_MOUSE_MOVE_JITTER\n\n");
gwinSetColor(ghc, White);
if (deviceType == GEVENT_MOUSE)
chprintf(gp, "Press and hold the mouse button and move around as if to draw.\n\n");
else
chprintf(gp, "Press firmly on the surface and move around as if to draw.\n\n");
chprintf(gp, "Dots will display in this window. Ensure that when you stop moving your finger that "
"new dots stop displaying.\nNew dots should only display when your finger is moving.\n\n"
"Adjust GINPUT_MOUSE_MOVE_JITTER to the smallest value that this reliably works for.\n\n");
chprintf(gp, "Press Next or Back to continue.\n\n");
while(1) {
pe = geventEventWait(&gl, TIME_INFINITE);
if (pe->type == GEVENT_GWIN_BUTTON) {
peb = (GEventGWinButton *)pe;
if (peb->button == ghPrev)
goto StepCalibrate;
if (peb->button == ghNext)
break;
}
if (pe->type == GEVENT_MOUSE || pe->type == GEVENT_TOUCH) {
pem = (GEventMouse *)pe;
if ((pem->current_buttons & GINPUT_MOUSE_BTN_LEFT))
chprintf(gp, ".");
}
}
/*
* Test: Polling frequency
*/
StepPolling:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
chprintf(gp, "\n5. GINPUT_MOUSE_POLL_PERIOD\n\n");
gwinSetColor(ghc, White);
chprintf(gp, "Press firmly on the surface (or press and hold the mouse button) and move around as if to draw.\n\n");
chprintf(gp, "A green line will follow your finger.\n"
"Adjust GINPUT_MOUSE_POLL_PERIOD to the highest value that provides a line without "
"gaps that are too big.\nDecreasing the value increases CPU usage.\n"
"About 25 (millisecs) normally produces good results."
"This test can be ignored for interrupt driven drivers.\n\n");
chprintf(gp, "Press Next or Back to continue.\n\n");
while(1) {
pe = geventEventWait(&gl, TIME_INFINITE);
if (pe->type == GEVENT_GWIN_BUTTON) {
peb = (GEventGWinButton *)pe;
if (peb->button == ghPrev)
goto StepJitter;
if (peb->button == ghNext)
break;
}
if (pe->type == GEVENT_MOUSE || pe->type == GEVENT_TOUCH) {
pem = (GEventMouse *)pe;
if ((pem->current_buttons & GINPUT_MOUSE_BTN_LEFT))
gdispDrawPixel(pem->x, pem->y, Green);
}
}
/*
* Test: Click Jitter
*/
StepClickJitter:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
chprintf(gp, "\n6. GINPUT_MOUSE_MAX_CLICK_JITTER\n\n");
gwinSetColor(ghc, White);
chprintf(gp, "Press and release the touch surface to \"click\".\nTry both short and long presses.\n");
chprintf(gp, "For a mouse click with the left and right buttons.\n\n");
chprintf(gp, "Dots will display in this window. A yellow dash is a left (or short) click. "
"A red x is a right (or long) click.\n\n"
"Adjust GINPUT_MOUSE_CLICK_JITTER to the smallest value that this reliably works for.\n"
"Adjust GINPUT_MOUSE_CLICK_TIME to adjust distinguishing short vs long presses.\n"
"TIME_INFINITE means there are no long presses (although a right mouse button will still work).\n\n"
"Note: moving your finger (mouse) during a click cancels it.\n\n");
chprintf(gp, "This is the last test but you can press Next or Back to continue.\n\n");
while(1) {
pe = geventEventWait(&gl, TIME_INFINITE);
if (pe->type == GEVENT_GWIN_BUTTON) {
peb = (GEventGWinButton *)pe;
if (peb->button == ghPrev)
goto StepPolling;
if (peb->button == ghNext)
break;
}
if (pe->type == GEVENT_MOUSE || pe->type == GEVENT_TOUCH) {
pem = (GEventMouse *)pe;
if ((pem->meta & GMETA_MOUSE_CLICK)) {
gwinSetColor(ghc, Yellow);
chprintf(gp, "-");
}
if ((pem->meta & GMETA_MOUSE_CXTCLICK)) {
gwinSetColor(ghc, Red);
chprintf(gp, "x");
}
}
}
// Can't let this really exit
goto StepDeviceType;
}
/*------------------------------------------------------------------------*
* GINPUT Touch Driver Calibrator. *
*------------------------------------------------------------------------*/
int main(void) {
GSourceHandle gs;
GEventMouse *pem;
bool_t isFirstTime;
bool_t isCalibrated;
bool_t isTouch;
bool_t isFinger;
const char * isFingerText;
const char * deviceText;
GMouse * m;
GMouseVMT * vmt;
GMouseJitter * pjit;
uint32_t calerr;
gfxInit(); // Initialize the display
// Get the display dimensions
swidth = gdispGetWidth();
sheight = gdispGetHeight();
// Create our title
font = gdispOpenFont("UI2");
gwinSetDefaultFont(font);
bWidth = gdispGetStringWidth("Next", font);
bHeight = gdispGetStringWidth("Prev", font);
if (bHeight > bWidth) bWidth = bHeight;
bWidth += 4;
bWidth2 = gdispGetStringWidth("+", font)*2;
bHeight = gdispGetStringWidth("-", font)*2;
if (bHeight > bWidth2) bWidth2 = bHeight;
bWidth2 += 4;
bHeight = gdispGetFontMetric(font, fontHeight)*2+2;
// Create our main display window
{
GWindowInit wi;
gwinClearInit(&wi);
wi.show = TRUE; wi.x = 0; wi.y = bHeight; wi.width = swidth; wi.height = sheight-bHeight;
ghc = gwinConsoleCreate(&gc, &wi);
}
// Initialize the listener
geventListenerInit(&gl);
// Copy the current mouse's VMT so we can play with it.
m = (GMouse *)gdriverGetInstance(GDRIVER_TYPE_MOUSE, 0);
if (!m) gfxHalt("No mouse instance 0");
vmt = gfxAlloc(sizeof(GMouseVMT));
if (!vmt) gfxHalt("Could not allocate memory for mouse VMT");
memcpy(vmt, m->d.vmt, sizeof(GMouseVMT));
// Swap VMT's on the current mouse to our RAM copy
m->d.vmt = (const GDriverVMT *)vmt;
// Listen for events
gs = ginputGetMouse(0);
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
// Get initial display settings for buttons
isFirstTime = TRUE;
isCalibrated = (vmt->d.flags & GMOUSE_VFLG_CALIBRATE) ? FALSE : TRUE;
calerr = 0;
/*
* Test: Device Type
*/
StepDeviceType:
DrawHeader("1. Device Type", isCalibrated, isCalibrated && !isFirstTime, isCalibrated);
// Get the type of device and the current mode
isTouch = (vmt->d.flags & GMOUSE_VFLG_TOUCH) ? TRUE : FALSE;
isFinger = (m->flags & GMOUSE_FLG_FINGERMODE) ? TRUE : FALSE;
pjit = isFinger ? &vmt->finger_jitter : &vmt->pen_jitter;
isFingerText = isFinger ? "finger" : "pen";
deviceText = isTouch ? isFingerText : "mouse";
gwinPrintf(ghc, "This is detected as a %s device\n\n", isTouch ? "TOUCH" : "MOUSE");
gwinPrintf(ghc, "It is currently in %s mode\n\n", isFinger ? "FINGER" : "PEN");
if (!isCalibrated)
gwinPrintf(ghc, "Press and release your %s to move on to the next test.\n", deviceText);
else {
gwinPrintf(ghc, "Press + for pen or - for finger.\n");
if (isFirstTime)
gwinPrintf(ghc, "Press Next to continue.\n");
else
gwinPrintf(ghc, "Press Next or Back to continue.\n");
}
while(1) {
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
if (isCalibrated) {
switch (CheckButtons(pem)) {
case BTN_NEXT:
break;
case BTN_PREV:
if (!isFirstTime)
goto StepDrawing;
continue;
case BTN_PLUS:
m->flags &= ~GMOUSE_FLG_FINGERMODE;
goto StepDeviceType;
case BTN_MINUS:
m->flags |= GMOUSE_FLG_FINGERMODE;
goto StepDeviceType;
default:
continue;
}
break;
}
if ((pem->buttons & GMETA_MOUSE_UP))
break;
}
/*
* Test: Mouse raw reading
*/
StepRawReading:
DrawHeader("2. Raw Mouse Output", FALSE, FALSE, FALSE);
if (isTouch)
gwinPrintf(ghc, "Press and hold on the surface.\n\n");
else
gwinPrintf(ghc, "Press and hold the mouse button.\n\n");
gwinPrintf(ghc, "The raw values coming from your mouse driver will display.\n\n");
gwinPrintf(ghc, "Make sure the x and y values change as you move.\n\n");
gwinPrintf(ghc, "Release your %s to move on to the next test.\n", deviceText);
// Make sure we are in uncalibrated mode
m->flags &= ~(GMOUSE_FLG_CALIBRATE|GMOUSE_FLG_CLIP);
// For this test turn on ALL mouse movement events
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEUPMOVES|GLISTEN_MOUSEMETA|GLISTEN_MOUSENOFILTER);
while(1) {
// Always sleep a bit first to enable other events. We actually don't
// mind missing events for this test.
gfxSleepMilliseconds(100);
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
gwinPrintf(ghc, "%u, %u z=%u b=0x%04x\n", pem->x, pem->y, pem->z, pem->buttons & ~GINPUT_MISSED_MOUSE_EVENT);
if ((pem->buttons & GMETA_MOUSE_UP))
break;
}
// Reset to calibrated condition
if (isCalibrated) {
m->flags |= GMOUSE_FLG_CLIP;
if ((vmt->d.flags & GMOUSE_VFLG_CALIBRATE))
m->flags |= GMOUSE_FLG_CALIBRATE;
}
// Reset to just changed movements.
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
/*
* Test: Calibration
*/
StepCalibrate:
DrawHeader("3. Calibration Jitter", isCalibrated, isCalibrated, isCalibrated);
if ((vmt->d.flags & GMOUSE_VFLG_CALIBRATE)) {
gwinPrintf(ghc, "You will be presented with a number of points to touch.\nPress them in turn.\n\n"
"If the calibration repeatedly fails, increase the jitter for %s calibration and try again.\n\n", isFingerText);
gwinPrintf(ghc, "Pressing the surface for longer gives more accurate results.\n\n");
if (calerr)
gwinPrintf(ghc, "Last calibration error ^ 2 = %u\n", calerr);
gwinPrintf(ghc, "Calibration jitter (%s) = %u\n", isFingerText, pjit->calibrate);
if (isCalibrated)
gwinPrintf(ghc, "Press + or - to adjust.\n");
} else {
gwinPrintf(ghc, "This device does not need calibration.\n\n");
}
if (isCalibrated)
gwinPrintf(ghc, "Press Next or Back to continue.\n");
else
gwinPrintf(ghc, "Press and release your %s to move on to start calibration.\n", deviceText);
while(1) {
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
if (isCalibrated) {
switch (CheckButtons(pem)) {
case BTN_NEXT:
break;
case BTN_PREV:
goto StepRawReading;
case BTN_PLUS:
gwinPrintf(ghc, "Calibration jitter (%s) = %u", isFingerText, ++pjit->calibrate);
continue;
case BTN_MINUS:
gwinPrintf(ghc, "Calibration jitter (%s) = %u", isFingerText, --pjit->calibrate);
continue;
default:
continue;
}
break;
}
if ((pem->buttons & GMETA_MOUSE_UP))
break;
}
// Calibrate
if ((vmt->d.flags & GMOUSE_VFLG_CALIBRATE)) {
calerr = ginputCalibrateMouse(0);
if (calerr)
goto StepCalibrate;
isCalibrated = TRUE;
}
/*
* Test: Mouse coords
*/
StepMouseCoords:
DrawHeader("4. Show Mouse Coordinates", TRUE, TRUE, TRUE);
if (isTouch)
gwinPrintf(ghc, "Press and hold on the surface.\n\n");
else
gwinPrintf(ghc, "Press and hold the mouse button.\n\n");
gwinPrintf(ghc, "Check the coordinates against where it should be on the screen.\n\n");
gwinPrintf(ghc, "X should be 0 to %u\nY should be 0 to %u\n\n", swidth-1, sheight-1);
gwinPrintf(ghc, "Press + to retry using extremes or - for normal calibration.\n");
gwinPrintf(ghc, "Press Next or Back to continue.\n");
// For this test normal mouse movement events
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
while(1) {
// Always sleep a bit first to enable other events. We actually don't
// mind missing events for this test.
gfxSleepMilliseconds(100);
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
switch (CheckButtons(pem)) {
case BTN_NEXT:
break;
case BTN_PREV:
goto StepCalibrate;
case BTN_PLUS:
vmt->d.flags |= GMOUSE_VFLG_CAL_EXTREMES;
goto StepCalibrate;
case BTN_MINUS:
vmt->d.flags &= ~GMOUSE_VFLG_CAL_EXTREMES;
goto StepCalibrate;
default:
gwinPrintf(ghc, "%u, %u\n", pem->x, pem->y);
continue;
}
break;
}
// Reset to just changed movements.
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
/*
* Test: Mouse movement jitter
*/
StepMovementJitter:
DrawHeader("5. Movement Jitter", TRUE, TRUE, TRUE);
if (isTouch)
gwinPrintf(ghc, "Press firmly on the surface and move around as if to draw.\n\n");
else
gwinPrintf(ghc, "Press and hold the mouse button and move around as if to draw.\n\n");
gwinPrintf(ghc, "Dots will display in this window. Ensure that when you stop moving your %s that "
"new dots stop displaying.\nNew dots should only display when your %s is moving.\n\n"
"Adjust %s movement jitter to the smallest value that this reliably works for.\n\n", deviceText, deviceText, isFingerText);
gwinPrintf(ghc, "Movement jitter (%s) = %u\n", isFingerText, pjit->move);
gwinPrintf(ghc, "Press + or - to adjust.\n");
gwinPrintf(ghc, "Press Next or Back to continue.\n\n");
while(1) {
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
switch (CheckButtons(pem)) {
case BTN_NEXT:
break;
case BTN_PREV:
goto StepMouseCoords;
case BTN_PLUS:
gwinPrintf(ghc, "Movement jitter (%s) = %u", isFingerText, ++pjit->move);
continue;
case BTN_MINUS:
gwinPrintf(ghc, "Movement jitter (%s) = %u", isFingerText, --pjit->move);
continue;
default:
if ((pem->buttons & GINPUT_MOUSE_BTN_LEFT))
gwinPrintf(ghc, ".");
continue;
}
break;
}
/*
* Test: Click Jitter
*/
StepClickJitter:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
gwinPrintf(ghc, "\n6. Click Jitter\n\n");
gwinSetColor(ghc, White);
if (isTouch)
gwinPrintf(ghc, "Press and release the touch surface to \"click\".\nTry both short and long presses.\n");
else
gwinPrintf(ghc, "Click the mouse with the left and right buttons.\n\n");
gwinPrintf(ghc, "A yellow dash is a left (or short) click.\n"
"A red x is a right (or long) click.\n\n"
"Adjust %s click jitter to the smallest value that this reliably works for.\n"
"Note: moving your %s during a click cancels it.\n\n", isFingerText, deviceText);
gwinPrintf(ghc, "Click jitter (%s) = %u\n", isFingerText, pjit->click);
gwinPrintf(ghc, "Press + or - to adjust.\n");
gwinPrintf(ghc, "Press Next or Back to continue.\n\n");
while(1) {
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
switch (CheckButtons(pem)) {
case BTN_NEXT:
break;
case BTN_PREV:
goto StepMovementJitter;
case BTN_PLUS:
gwinPrintf(ghc, "Click jitter (%s) = %u", isFingerText, ++pjit->click);
continue;
case BTN_MINUS:
gwinPrintf(ghc, "Click jitter (%s) = %u", isFingerText, --pjit->click);
continue;
default:
if ((pem->buttons & GMETA_MOUSE_CLICK)) {
gwinSetColor(ghc, Yellow);
gwinPrintf(ghc, "-");
}
if ((pem->buttons & GMETA_MOUSE_CXTCLICK)) {
gwinSetColor(ghc, uRed);
gwinPrintf(ghc, "x");
}
continue;
}
break;
}
/*
* Test: Polling frequency
*/
StepDrawing:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
gwinPrintf(ghc, "\n7. Drawing\n\n");
gwinSetColor(ghc, White);
gwinPrintf(ghc, "Press firmly on the surface (or press and hold the mouse button) and move around as if to draw.\n\n");
gwinPrintf(ghc, "A green line will follow your %s.\n\n", deviceText);
gwinPrintf(ghc, "Pressing Next will start the tests again but with the option of changing pen/finger mode.\n\n");
gwinPrintf(ghc, "Press Next or Back to continue.\n\n");
while(1) {
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
if (pem->y < bHeight && pem->x >= swidth-2*bWidth) {
if ((pem->buttons & GMETA_MOUSE_UP)) {
if (pem->x >= swidth-bWidth)
break;
goto StepClickJitter;
}
}
gdispDrawPixel(pem->x, pem->y, uGreen);
}
// Can't let this really exit
isFirstTime = FALSE;
goto StepDeviceType;
}
/*------------------------------------------------------------------------*
* GINPUT Touch Driver Calibrator. *
*------------------------------------------------------------------------*/
int main(void) {
GSourceHandle gs;
GEventMouse *pem;
GMouse * m;
GMouseVMT * vmt;
gfxInit(); // Initialize the display
// Get the display dimensions
swidth = gdispGetWidth();
sheight = gdispGetHeight();
// Create our title
font = gdispOpenFont("UI2");
gwinSetDefaultFont(font);
bHeight = gdispGetFontMetric(font, fontHeight)+4;
gdispFillStringBox(0, 0, swidth, bHeight, "Raw Touch Readings", font, Red, White, justifyCenter);
// Create our main display writing window
{
GWindowInit wi;
gwinClearInit(&wi);
wi.show = TRUE; wi.x = 0; wi.y = bHeight; wi.width = swidth; wi.height = sheight-bHeight;
ghc = gwinConsoleCreate(&gc, &wi);
}
// Initialize the listener
geventListenerInit(&gl);
// Copy the current mouse's VMT so we can play with it.
m = (GMouse *)gdriverGetInstance(GDRIVER_TYPE_MOUSE, 0);
if (!m) gfxHalt("No mouse instance 0");
vmt = gfxAlloc(sizeof(GMouseVMT));
if (!vmt) gfxHalt("Could not allocate memory for mouse VMT");
memcpy(vmt, m->d.vmt, sizeof(GMouseVMT));
// Swap VMT's on the current mouse to our RAM copy
m->d.vmt = (const GDriverVMT *)vmt;
// Listen for events
gs = ginputGetMouse(0);
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
// Make sure we are in uncalibrated pen mode
m->flags &= ~(GMOUSE_FLG_CALIBRATE|GMOUSE_FLG_CLIP|GMOUSE_FLG_FINGERMODE);
// Pretend we are a mouse, turn off all touch processing, turn off move and click filtering
vmt->d.flags &= ~(GMOUSE_VFLG_TOUCH | GMOUSE_VFLG_ONLY_DOWN | GMOUSE_VFLG_POORUPDOWN);
vmt->pen_jitter.move = 0;
vmt->pen_jitter.click = 0;
// For this test turn on ALL mouse movement events
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEUPMOVES|GLISTEN_MOUSEMETA|GLISTEN_MOUSENOFILTER);
while(1) {
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
gwinPrintf(ghc, "%u, %u z=%u b=0x%04x\n", pem->x, pem->y, pem->z, pem->buttons & ~GINPUT_MISSED_MOUSE_EVENT);
// Always sleep a bit first to enable other events. We actually don't mind missing events.
gfxSleepMilliseconds(100);
}
}
static msg_t notepadThread(void *param) {
GEventMouse *pem;
GEventGWinButton *peb;
GHandle ghc;
(void)param;
/* Get the display dimensions */
swidth = gdispGetWidth();
sheight = gdispGetHeight();
font = gdispOpenFont("UI2");
/* Initialize the mouse */
geventListenerInit(&gl);
ginputGetMouse(0);
initButtons();
/* Configure the GIF decoder with the toolbar Icon images */
gdispImageSetMemoryReader(&toolbarImageFilmstrip, toolbarIcons);
gdispImageOpen(&toolbarImageFilmstrip);
/* Set clip to the entire screen */
gdispSetClip(0, 0, swidth, sheight);
/* Clear the screen with the window background
* Also, draw the title bars */
gdispClear(nCurColorScheme.winBgColor);
gdispDrawBox(0, 0, swidth, sheight, nCurColorScheme.titleBarColor);
gdispFillArea(0, 0, swidth, NPAD_TITLEBAR_HEIGHT, nCurColorScheme.titleBarColor);
gdispDrawStringBox(NPAD_TITLETEXT_START_X,
NPAD_TITLETEXT_START_Y,
swidth,
NPAD_TITLEBAR_HEIGHT,
NPAD_TITLETEXT_STR,
font,
nCurColorScheme.titleTextColor,
justifyLeft);
/* Create the drawing window, draw its border */
gdispDrawBox(NPAD_DRAWING_AREA_START_X - 1,
NPAD_DRAWING_AREA_START_Y - 1,
NPAD_DRAWING_AREA_WIDTH + 2,
NPAD_DRAWING_AREA_HEIGHT + 2,
nCurColorScheme.drawingWinBorder);
nDrawingArea = gwinCreateWindow(NULL,
NPAD_DRAWING_AREA_START_X,
NPAD_DRAWING_AREA_START_Y,
NPAD_DRAWING_AREA_WIDTH,
NPAD_DRAWING_AREA_HEIGHT);
/* Create the bottom status bar console */
ghc = gwinCreateConsole(NULL,
NPAD_STATUSBAR_START_X,
NPAD_STATUSBAR_START_Y,
NPAD_STATUSBAR_WIDTH,
NPAD_STATUSBAR_HEIGHT,
font);
gdispImageDraw(&toolbarImageFilmstrip,
NPAD_STATUSBAR_ICON_START_X,
NPAD_STATUSBAR_ICON_START_Y,
NPAD_ICON_WIDTH,
NPAD_ICON_HEIGHT,
NPAD_ICON_START(12),
0);
gwinSetBgColor(ghc, nCurColorScheme.winBgColor);
gwinSetColor(ghc, Black);
gstatusConsole = gwinGetConsoleStream(ghc);
/* draw the buttons */
gwinSetColor(nDrawingArea, Black);
gwinSetBgColor(nDrawingArea, White);
gwinClear(nDrawingArea);
gwinClear(ghc);
drawButtons();
drawVButtons();
chprintf(gstatusConsole, "Welcome to ChibiOS/GFX Notepad demo.");
ncoreSpawnDrawThread(nDrawingArea, gstatusConsole);
while(TRUE) {
pem = (GEventMouse *) geventEventWait(&gl, TIME_INFINITE);
/* button pressed... */
if (pem->type == GEVENT_GWIN_BUTTON) {
peb = (GEventGWinButton *)pem;
if (peb->button == H(btnNew)) {
// Reset all the settings
selColorIndex = 0;
selPenWidth = 0;
ncoreSetMode(NCORE_MODE_DRAW);
gwinSetColor(nDrawingArea, Black);
gwinSetBgColor(nDrawingArea, White);
// Refresh the buttons
drawButtons();
drawVButtons();
gwinClear(nDrawingArea);
chprintf(gstatusConsole, "\nScreen Cleared.");
}
else if (peb->button == H(btnOpen)) {
chprintf(gstatusConsole, "\nFile Open not implemented.");
}
else if (peb->button == H(btnSave)) {
chprintf(gstatusConsole, "\nFile Save not implemented.");
}
else if (peb->button == H(btnPencil)) {
ncoreSetMode(NCORE_MODE_DRAW);
drawVButtons();
chprintf(gstatusConsole, "\nPencil Tool Selected.");
}
else if (peb->button == H(btnEraser)) {
ncoreSetMode(NCORE_MODE_ERASE);
drawVButtons();
chprintf(gstatusConsole, "\nEraser Tool Selected.");
}
else if (peb->button == H(btnFill)) {
ncoreSetMode(NCORE_MODE_FILL);
drawVButtons();
chprintf(gstatusConsole, "\nFill Tool Selected.");
}
else if (peb->button == H(btnClose)) {
break;
}
}
}
gwinDestroyWindow(ghc);
// No need to destroy the buttons as they are statically allocated
gdispCloseFont(font);
ncoreTerminateDrawThread();
gdispImageClose(&toolbarImageFilmstrip);
return 0;
}
/*------------------------------------------------------------------------*
* GINPUT Touch Driver Calibrator. *
*------------------------------------------------------------------------*/
int main(void) {
GSourceHandle gs;
GEventMouse *pem;
coord_t swidth, sheight;
GHandle ghc;
GEventType deviceType;
bool_t calibrated;
coord_t bWidth, bHeight;
gfxInit(); // Initialize the display
// Get the display dimensions
swidth = gdispGetWidth();
sheight = gdispGetHeight();
calibrated = FALSE;
// Create our title
font = gdispOpenFont("UI2");
gwinSetDefaultFont(font);
bWidth = gdispGetStringWidth("Next", font);
bHeight = gdispGetStringWidth("Prev", font);
if (bHeight > bWidth) bWidth = bHeight;
bWidth += 4;
bHeight = gdispGetFontMetric(font, fontHeight)+2;
gdispFillStringBox(0, 0, swidth, bHeight, "Touch Calibration", font, Red, White, justifyLeft);
// Create our main display window
{
GWindowInit wi;
gwinClearInit(&wi);
wi.show = TRUE; wi.x = 0; wi.y = bHeight; wi.width = swidth; wi.height = sheight-bHeight;
ghc = gwinConsoleCreate(&gc, &wi);
}
gwinClear(ghc);
// Initialize the mouse in our special no calibration mode.
geventListenerInit(&gl);
gs = ginputGetMouse(9999);
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
/*
* Test: Device Type
*/
StepDeviceType:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
gwinPrintf(ghc, "\n1. DEVICE TYPE\n\n");
pem = (GEventMouse *)&gl.event;
ginputGetMouseStatus(0, pem);
deviceType = pem->type;
gwinSetColor(ghc, White);
gwinPrintf(ghc, "This is detected as a %s device\n\n",
deviceType == GEVENT_MOUSE ? "MOUSE" : (pem->type == GEVENT_TOUCH ? "TOUCH" : "UNKNOWN"));
if (calibrated)
gwinPrintf(ghc, "Press Next or Back to continue.\n");
else if (deviceType == GEVENT_MOUSE)
gwinPrintf(ghc, "Click the mouse button to move on to the next test.\n");
else
gwinPrintf(ghc, "Press and release your finger to move on to the next test.\n");
while(1) {
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
if (calibrated) {
if (pem->y < bHeight && pem->x >= swidth-2*bWidth) {
if ((pem->meta & GMETA_MOUSE_UP)) {
if (pem->x >= swidth-bWidth)
break;
goto StepClickJitter;
}
}
} else if ((pem->meta & GMETA_MOUSE_UP))
break;
}
/*
* Test: Mouse raw reading jitter
*/
StepRawJitter:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
gwinPrintf(ghc, "\n2. GINPUT_MOUSE_READ_CYCLES\n\n");
gwinSetColor(ghc, White);
if (deviceType == GEVENT_MOUSE)
gwinPrintf(ghc, "Press and hold the mouse button.\n\n");
else
gwinPrintf(ghc, "Press and hold on the surface.\n\n");
gwinPrintf(ghc, "Numbers will display in this window.\n"
"Ensure that values don't jump around very much when your finger is stationary.\n\n"
"Increasing GINPUT_MOUSE_READ_CYCLES helps reduce jitter but increases CPU usage.\n\n");
if (calibrated)
gwinPrintf(ghc, "Press Next or Back to continue.\n");
else if (deviceType == GEVENT_MOUSE)
gwinPrintf(ghc, "Release the mouse button to move on to the next test.\n");
else
gwinPrintf(ghc, "Release your finger to move on to the next test.\n");
// For this test turn on ALL mouse movement events
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEUPMOVES|GLISTEN_MOUSEMETA|GLISTEN_MOUSENOFILTER);
while(1) {
// Always sleep a bit first to enable other events. We actually don't
// mind missing events for this test.
gfxSleepMilliseconds(100);
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
if (calibrated) {
if (pem->y < bHeight && pem->x >= swidth-2*bWidth) {
if ((pem->meta & GMETA_MOUSE_UP)) {
if (pem->x >= swidth-bWidth)
break;
goto StepDeviceType;
}
}
} else if ((pem->meta & GMETA_MOUSE_UP))
break;
gwinPrintf(ghc, "%u:%u z=%u b=0x%04x m=%04x\n", pem->x, pem->y, pem->z, pem->current_buttons, pem->meta);
}
// Reset to just changed movements.
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
/*
* Test: Calibration
*/
StepCalibrate:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
gwinPrintf(ghc, "\n3. GINPUT_MOUSE_CALIBRATION_ERROR\n\n");
gwinSetColor(ghc, Gray);
gwinPrintf(ghc, "Ensure GINPUT_MOUSE_NEED_CALIBRATION = TRUE and GINPUT_MOUSE_CALIBRATION_ERROR is >= 0\n\n");
gwinSetColor(ghc, White);
gwinPrintf(ghc, "You will be presented with a number of points to touch.\nPress them in turn.\n\n"
"If the calibration repeatedly fails, increase GINPUT_MOUSE_CALIBRATION_ERROR and try again.\n\n");
if (calibrated)
gwinPrintf(ghc, "Press Next to start the calibration.\n");
else if (deviceType == GEVENT_MOUSE)
gwinPrintf(ghc, "Click the mouse button to start the calibration.\n");
else
gwinPrintf(ghc, "Press and release your finger to start the calibration.\n");
while(1) {
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
if (calibrated) {
if (pem->y < bHeight && pem->x >= swidth-2*bWidth) {
if ((pem->meta & GMETA_MOUSE_UP)) {
if (pem->x >= swidth-bWidth)
break;
goto StepRawJitter;
}
}
} else if ((pem->meta & GMETA_MOUSE_UP))
break;
}
// Calibrate
ginputCalibrateMouse(0);
calibrated = TRUE;
// Calibration used the whole screen - re-establish our title and Next and Previous Buttons
gdispFillStringBox(0, 0, swidth, bHeight, "Touch Calibration", font, Green, White, justifyLeft);
gdispFillStringBox(swidth-2*bWidth, 0, bWidth-1, bHeight, "Prev", font, Black, Gray, justifyCenter);
gdispFillStringBox(swidth-1*bWidth, 0, bWidth , bHeight, "Next", font, Black, Gray, justifyCenter);
/*
* Test: Mouse coords
*/
StepMouseCoords:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
gwinPrintf(ghc, "\n4. Show Mouse Coordinates\n\n");
gwinSetColor(ghc, White);
if (deviceType == GEVENT_MOUSE)
gwinPrintf(ghc, "Press and hold the mouse button.\n\n");
else
gwinPrintf(ghc, "Press and hold on the surface.\n\n");
gwinPrintf(ghc, "Numbers will display in this window.\n"
"Check the coordinates against where it should be on the screen.\n\n");
gwinPrintf(ghc, "Press Next or Back to continue.\n");
// For this test normal mouse movement events
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
while(1) {
// Always sleep a bit first to enable other events. We actually don't
// mind missing events for this test.
gfxSleepMilliseconds(100);
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
if (pem->y < bHeight && pem->x >= swidth-2*bWidth) {
if ((pem->meta & GMETA_MOUSE_UP)) {
if (pem->x >= swidth-bWidth)
break;
goto StepCalibrate;
}
}
if ((pem->current_buttons & GINPUT_MOUSE_BTN_LEFT))
gwinPrintf(ghc, "%u:%u z=%u\n", pem->x, pem->y, pem->z);
}
// Reset to just changed movements.
geventAttachSource(&gl, gs, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
/*
* Test: Mouse movement jitter
*/
StepJitter:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
gwinPrintf(ghc, "\n4. GINPUT_MOUSE_MOVE_JITTER\n\n");
gwinSetColor(ghc, White);
if (deviceType == GEVENT_MOUSE)
gwinPrintf(ghc, "Press and hold the mouse button and move around as if to draw.\n\n");
else
gwinPrintf(ghc, "Press firmly on the surface and move around as if to draw.\n\n");
gwinPrintf(ghc, "Dots will display in this window. Ensure that when you stop moving your finger that "
"new dots stop displaying.\nNew dots should only display when your finger is moving.\n\n"
"Adjust GINPUT_MOUSE_MOVE_JITTER to the smallest value that this reliably works for.\n\n");
gwinPrintf(ghc, "Press Next or Back to continue.\n\n");
while(1) {
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
if (pem->y < bHeight && pem->x >= swidth-2*bWidth) {
if ((pem->meta & GMETA_MOUSE_UP)) {
if (pem->x >= swidth-bWidth)
break;
goto StepMouseCoords;
}
}
if ((pem->current_buttons & GINPUT_MOUSE_BTN_LEFT))
gwinPrintf(ghc, ".");
}
/*
* Test: Polling frequency
*/
StepPolling:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
gwinPrintf(ghc, "\n5. GINPUT_MOUSE_POLL_PERIOD\n\n");
gwinSetColor(ghc, White);
gwinPrintf(ghc, "Press firmly on the surface (or press and hold the mouse button) and move around as if to draw.\n\n");
gwinPrintf(ghc, "A green line will follow your finger.\n"
"Adjust GINPUT_MOUSE_POLL_PERIOD to the highest value that provides a line without "
"gaps that are too big.\nDecreasing the value increases CPU usage.\n"
"About 25 (millisecs) normally produces good results."
"This test can be ignored for interrupt driven drivers.\n\n");
gwinPrintf(ghc, "Press Next or Back to continue.\n\n");
while(1) {
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
if (pem->y < bHeight && pem->x >= swidth-2*bWidth) {
if ((pem->meta & GMETA_MOUSE_UP)) {
if (pem->x >= swidth-bWidth)
break;
goto StepJitter;
}
}
if ((pem->current_buttons & GINPUT_MOUSE_BTN_LEFT))
gdispDrawPixel(pem->x, pem->y, Green);
}
/*
* Test: Click Jitter
*/
StepClickJitter:
gwinClear(ghc);
gwinSetColor(ghc, Yellow);
gwinPrintf(ghc, "\n6. GINPUT_MOUSE_MAX_CLICK_JITTER\n\n");
gwinSetColor(ghc, White);
gwinPrintf(ghc, "Press and release the touch surface to \"click\".\nTry both short and long presses.\n");
gwinPrintf(ghc, "For a mouse click with the left and right buttons.\n\n");
gwinPrintf(ghc, "Dots will display in this window. A yellow dash is a left (or short) click. "
"A red x is a right (or long) click.\n\n"
"Adjust GINPUT_MOUSE_CLICK_JITTER to the smallest value that this reliably works for.\n"
"Adjust GINPUT_MOUSE_CLICK_TIME to adjust distinguishing short vs long presses.\n"
"TIME_INFINITE means there are no long presses (although a right mouse button will still work).\n\n"
"Note: moving your finger (mouse) during a click cancels it.\n\n");
gwinPrintf(ghc, "This is the last test but you can press Next or Back to continue.\n\n");
while(1) {
pem = (GEventMouse *)geventEventWait(&gl, TIME_INFINITE);
if (pem->y < bHeight && pem->x >= swidth-2*bWidth) {
if ((pem->meta & GMETA_MOUSE_UP)) {
if (pem->x >= swidth-bWidth)
break;
goto StepPolling;
}
}
if ((pem->meta & GMETA_MOUSE_CLICK)) {
gwinSetColor(ghc, Yellow);
gwinPrintf(ghc, "-");
}
if ((pem->meta & GMETA_MOUSE_CXTCLICK)) {
gwinSetColor(ghc, Red);
gwinPrintf(ghc, "x");
}
}
// Can't let this really exit
goto StepDeviceType;
}
/*
* Application entry point.
*/
int main(void) {
color_t color = Black;
uint16_t pen = 0;
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
gdispInit();
ginputGetMouse(0);
gdispSetOrientation(GDISP_ROTATE_90);
drawScreen();
palSetPadMode(GPIOC, 7, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOC, 8, PAL_MODE_OUTPUT_PUSHPULL);
palSetPadMode(GPIOC, 9, PAL_MODE_OUTPUT_PUSHPULL);
/*
* Creates the blinker thread.
*/
(void)chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
while (TRUE) {
ginputGetMouseStatus(0, &ev);
if (!(ev.current_buttons & GINPUT_MOUSE_BTN_LEFT))
{
chThdSleepMicroseconds(500); // Senza questo sleep l'USB non parte
continue;
}
/* inside color box ? */
if(ev.y >= OFFSET && ev.y <= COLOR_SIZE) {
if(GET_COLOR(0)) color = Black;
else if(GET_COLOR(1)) color = Red;
else if(GET_COLOR(2)) color = Yellow;
else if(GET_COLOR(3)) color = Green;
else if(GET_COLOR(4)) color = Blue;
else if(GET_COLOR(5)) color = White;
/* inside pen box ? */
} else if(ev.x >= OFFSET && ev.x <= PEN_SIZE) {
if(GET_PEN(1)) pen = 0;
else if(GET_PEN(2)) pen = 1;
else if(GET_PEN(3)) pen = 2;
else if(GET_PEN(4)) pen = 3;
else if(GET_PEN(5)) pen = 4;
/* inside drawing area ? */
} else if(DRAW_AREA(ev.x, ev.y)) {
if(pen == 0)
gdispDrawPixel(ev.x, ev.y, color);
else
gdispFillCircle(ev.x, ev.y, pen, color);
}
}
}
/*
* Application entry point.
*/
int main(void) {
color_t color = Black;
uint16_t pen = 0;
Thread *shelltp = NULL;
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
gdispInit();
ginputGetMouse(0);
gdispSetOrientation(GDISP_ROTATE_90);
drawScreen();
/*
* Initializes a serial-over-USB CDC driver.
*/
sduObjectInit(&SDU1);
sduStart(&SDU1, &serusbcfg);
/*
* Activates the USB driver and then the USB bus pull-up on D+.
* Note, a delay is inserted in order to not have to disconnect the cable
* after a reset.
*/
usbDisconnectBus(serusbcfg.usbp);
chThdSleepMilliseconds(1000);
usbStart(serusbcfg.usbp, &usbcfg);
usbConnectBus(serusbcfg.usbp);
/*
* Shell manager initialization.
*/
shellInit();
/*
* Creates the blinker thread.
*/
chThdCreateStatic(waThread1, sizeof(waThread1), NORMALPRIO, Thread1, NULL);
/*
* Normal main() thread activity, in this demo it does nothing except
* sleeping in a loop and check the button state.
*/
while (TRUE) {
if (!shelltp && (SDU1.config->usbp->state == USB_ACTIVE))
shelltp = shellCreate(&shell_cfg1, SHELL_WA_SIZE, NORMALPRIO);
else if (chThdTerminated(shelltp)) {
chThdRelease(shelltp); /* Recovers memory of the previous shell. */
shelltp = NULL; /* Triggers spawning of a new shell. */
}
ginputGetMouseStatus(0, &ev);
if (!(ev.current_buttons & GINPUT_MOUSE_BTN_LEFT))
{
chThdSleepMicroseconds(500); // Senza questo sleep l'USB non parte
continue;
}
/* inside color box ? */
if(ev.y >= OFFSET && ev.y <= COLOR_SIZE) {
if(GET_COLOR(0)) color = Black;
else if(GET_COLOR(1)) color = Red;
else if(GET_COLOR(2)) color = Yellow;
else if(GET_COLOR(3)) color = Green;
else if(GET_COLOR(4)) color = Blue;
else if(GET_COLOR(5)) color = White;
/* inside pen box ? */
} else if(ev.x >= OFFSET && ev.x <= PEN_SIZE) {
if(GET_PEN(1)) pen = 0;
else if(GET_PEN(2)) pen = 1;
else if(GET_PEN(3)) pen = 2;
else if(GET_PEN(4)) pen = 3;
else if(GET_PEN(5)) pen = 4;
/* inside drawing area ? */
} else if(DRAW_AREA(ev.x, ev.y)) {
if(pen == 0)
gdispDrawPixel(ev.x, ev.y, color);
else
gdispFillCircle(ev.x, ev.y, pen, color);
}
}
}
/*
* Application entry point.
*/
int main(void) {
/*
* System initializations.
* - HAL initialization, this also initializes the configured device drivers
* and performs the board-specific initializations.
* - Kernel initialization, the main() function becomes a thread and the
* RTOS is active.
*/
halInit();
chSysInit();
ADC2status = 0;
//write_to_backup_sram(0, 0, 0);
startBlinker();
/* initialize and clear the display */
gfxInit();
ginputGetMouse(0);
//ginputSetMouseCalibrationRoutines(0, mysave, myload, FALSE);
//ginputGetMouse(0);
// new ugfx do not need this gwinAttachMouse(0);
geventListenerInit(&gl);
gwinAttachListener(&gl);
//geventAttachSource(&gl, mouse, GLISTEN_MOUSEDOWNMOVES|GLISTEN_MOUSEMETA);
//mouse = ginputGetMouse(0);
//get screen size
width = gdispGetWidth();
height = gdispGetHeight();
swidth = gdispGetWidth();
sheight = gdispGetHeight();
font = gdispOpenFont("UI2");
//startBlinker();
myADCinit();
ICUinit();
/*
* Activates the serial driver 1 using the driver default configuration.
* PA2(TX) and PA3(RX) are routed to USART2.
*/
sdStart(&SD2, NULL);
palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(7));
palSetPadMode(GPIOA, 3, PAL_MODE_ALTERNATE(7));
chThdCreateStatic(waThread2, sizeof(waThread2), NORMALPRIO, Thread2, NULL);
//mouse = ginputGetMouse(0);
font = gdispOpenFont("UI2");
gwinSetDefaultFont(font);
gwinSetDefaultBgColor(Black);
gwinSetDefaultColor(White);
bHeight = gdispGetFontMetric(font, fontHeight)+2;
#if BOOTSCREEN
bootScreen();
#endif
#ifdef LOGO
gdispClear(Black);
CreateLogo();
#endif
// create main screen
createWidgets();
chprintf( (BaseSequentialStream *)&SD2, "Main loop\r\n", NULL );
while (TRUE)
{
//get an event
pe = geventEventWait(&gl, TIME_INFINITE);
switch(pe->type) {
case GEVENT_TOUCH:
{
pem = (GEventMouse *)pe;
if ((pem->type & GMETA_MOUSE_CLICK)) {
//gwinSetColor(ghc, Yellow);
chprintf((BaseSequentialStream *)&SD2, "\r\n-touch-click");
}
}
case GEVENT_GWIN_BUTTON:
if (((GEventGWinButton*)pe)->button == ghConsole)
{
gwinSetText(ghStatus2, "Console", TRUE);
chprintf( (BaseSequentialStream *)&SD2, "\r\nConsole button", NULL );
};
break;
case GEVENT_GWIN_SLIDER:
if (((GEventGWinSlider*)pe)->slider == ghBrightness)
{
gdispSetBacklight(((GEventGWinSlider *)pe)->position);
chprintf((BaseSequentialStream *)&SD2,"Slider %s = %d\r\n", gwinGetText(((GEventGWinSlider *)pe)->slider),
((GEventGWinSlider *)pe)->position);
}
break;
default:
break ;
}
}
}
