bounding_box_t draw_char(unsigned char c, unsigned char x, unsigned char y, ROM unsigned char *font) {
unsigned int16 pos;
unsigned char width;
bounding_box_t ret;
ret.x1 = x;
ret.y1 = y;
ret.x2 = x;
ret.y2 = y;
// Read first byte, should be 0x01 for proportional
if (font[FONT_HEADER_TYPE] != FONT_TYPE_PROPORTIONAL) return ret;
// Check second byte, should be 0x02 for "vertical ceiling"
if (font[FONT_HEADER_ORIENTATION] != FONT_ORIENTATION_VERTICAL_CEILING) return ret;
// Check that font start + number of bitmaps contains c
if (!(c >= font[FONT_HEADER_START] && c <= font[FONT_HEADER_START] + font[FONT_HEADER_LETTERS])) return ret;
// Adjust for start position of font vs. the char passed
c -= font[FONT_HEADER_START];
// Work out where in the array the character is
pos = font[c * FONT_HEADER_START + 5];
pos <<= 8;
pos |= font[c * FONT_HEADER_START + 6];
// Read first byte from this position, this gives letter width
width = font[pos];
// Draw left to right
unsigned char i;
for (i = 0; i < width; i++) {
// Draw top to bottom
for (unsigned char j = 0; j < font[FONT_HEADER_HEIGHT]; j++) {
// Increment one data byte every 8 bits, or
// at the start of a new column HiTech optimizes
// the modulo, so no need to try and avoid it.
if (j % 8 == 0) pos++;
if (font[pos] & 1 << (j % 8)) {
glcd_pixel(x + i, y + j, 1);
} else {
glcd_pixel(x + i, y + j, 0);
}
}
}
ret.x2 = ret.x1 + width - 1;
// TODO: Return the actual height drawn, rather than the height of the
// font.
// TODO: Bugreport schreiben für https://github.com/edeca/Electronics; folgende Zeile ist bei dem nicht auskommentiert
//ret.y2 = ret.y1 + height;
ret.y2 = ret.y1 + font[FONT_HEADER_HEIGHT];
return ret;
}
// Purpose: Draw a circle on a graphic LCD
// Inputs: (x,y) - the center of the circle
// radius - the radius of the circle
// fill - YES or NO
// color - ON or OFF
void glcd_circle(int x, int y, int radius, int1 fill, int1 color)
{
signed int a, b, P;
a = 0;
b = radius;
P = 1 - radius;
do
{
if(fill)
{
glcd_line(x-a, y+b, x+a, y+b, color);
glcd_line(x-a, y-b, x+a, y-b, color);
glcd_line(x-b, y+a, x+b, y+a, color);
glcd_line(x-b, y-a, x+b, y-a, color);
}
else
{
glcd_pixel(a+x, b+y, color);
glcd_pixel(b+x, a+y, color);
glcd_pixel(x-a, b+y, color);
glcd_pixel(x-b, a+y, color);
glcd_pixel(b+x, y-a, color);
glcd_pixel(a+x, y-b, color);
glcd_pixel(x-a, y-b, color);
glcd_pixel(x-b, y-a, color);
}
if(P < 0)
P+= 3 + 2*a++;
else
P+= 5 + 2*(a++ - b--);
} while(a <= b);
}
void draw_circle(char centre_x, char centre_y, char radius, char colour) {
signed int x = 0;
signed int y = radius;
signed int p = 1 - radius;
if (!radius) return;
for (x = 0; x < y; x++) {
if (p < 0) {
p += x * 2 + 3;
} else {
p += x * 2 - y * 2 + 5;
y--;
}
glcd_pixel(centre_x - x, centre_y - y, colour);
glcd_pixel(centre_x - y, centre_y - x, colour);
glcd_pixel(centre_x + y, centre_y - x, colour);
glcd_pixel(centre_x + x, centre_y - y, colour);
glcd_pixel(centre_x - x, centre_y + y, colour);
glcd_pixel(centre_x - y, centre_y + x, colour);
glcd_pixel(centre_x + y, centre_y + x, colour);
glcd_pixel(centre_x + x, centre_y + y, colour);
}
}
void glcd_line(unsigned int x0, unsigned int y0, unsigned int x1, unsigned int y1, unsigned int color)
{
int x = x1-x0;
int y = y1-y0;
int dx = abs(x), sx = x0<x1 ? 1 : -1;
int dy = -abs(y), sy = y0<y1 ? 1 : -1;
int err = dx+dy, e2; // error value e_xy
for (;;)
{
glcd_pixel(x0,y0,color);
e2 = 2*err;
if (e2 >= dy) // e_xy+e_x > 0
{
if (x0 == x1)
break;
err += dy;
x0 += sx;
}
if (e2 <= dx) // e_xy+e_y < 0
{
if (y0 == y1) break;
err += dx;
y0 += sy;
}
}
}
void draw_line(unsigned int x1, unsigned int y1, unsigned int x2, unsigned int y2, char colour) {
unsigned int xinc1, yinc1, den, num, numadd, numpixels, curpixel, xinc2, yinc2;
unsigned int deltax = abs(x2 - x1); // The difference between the x's
unsigned int deltay = abs(y2 - y1); // The difference between the y's
unsigned int x = x1; // Start x off at the first pixel
unsigned int y = y1; // Start y off at the first pixel
if (x2 >= x1) { // The x-values are increasing
xinc1 = 1;
xinc2 = 1;
} else { // The x-values are decreasing
xinc1 = -1;
xinc2 = -1;
}
if (y2 >= y1) // The y-values are increasing
{
yinc1 = 1;
yinc2 = 1;
} else // The y-values are decreasing
{
yinc1 = -1;
yinc2 = -1;
}
if (deltax >= deltay) // There is at least one x-value for every y-value
{
xinc1 = 0; // Don't change the x when numerator >= denominator
yinc2 = 0; // Don't change the y for every iteration
den = deltax;
num = deltax / 2;
numadd = deltay;
numpixels = deltax; // There are more x-values than y-values
} else // There is at least one y-value for every x-value
{
xinc2 = 0; // Don't change the x for every iteration
yinc1 = 0; // Don't change the y when numerator >= denominator
den = deltay;
num = deltay / 2;
numadd = deltax;
numpixels = deltay; // There are more y-values than x-values
}
for (curpixel = 0; curpixel <= numpixels; curpixel++) {
glcd_pixel(x, y, colour); // Draw the current pixel
num += numadd; // Increase the numerator by the top of the fraction
if (num >= den) // Check if numerator >= denominator
{
num -= den; // Calculate the new numerator value
x += xinc1; // Change the x as appropriate
y += yinc1; // Change the y as appropriate
}
x += xinc2; // Change the x as appropriate
y += yinc2; // Change the y as appropriate
}
}
void glcd_circle(int x0, int y0, int r, unsigned int color)
{
int x = -r, y = 0, err = 2-2*r, e2;
do
{
glcd_pixel(x0-x, y0+y,color);
glcd_pixel(x0+x, y0+y,color);
glcd_pixel(x0+x, y0-y,color);
glcd_pixel(x0-x, y0-y,color);
e2 = err;
if (e2 <= y)
{
err += ++y*2+1;
if (-x == y && e2 <= x)
e2 = 0;
}
if (e2 > x)
err += ++x*2+1;
} while (x <= 0);
}
//****************************************************************************//
// Purpose: Draw a 3D box on a graphic LCD (Ex: to make a 3D Button) //
// Inputs: (x, y) - the start point //
// (width, height) - size of the box //
// depth - 3D depth effect ratio of the box (2 or 3 is fine) //
// color - ON or OFF //
// Dependencies: glcd_pixel() //
//****************************************************************************//
void glcd_3Dbox(int x,int y,int width, int height, int depth, int color)
{
int i,j;
for(i=x;i<=x+width;i++)
{
glcd_pixel(i,y,1);
glcd_pixel(i,y+height,1);
}
for(i=y;i<=y+height;i++)
{
glcd_pixel(x,i,1);
glcd_pixel(x+width,i,1);
}
for(j=1;j<=depth;j++)
{
for(i=y+j;i<=y+height+j;i++)
{
glcd_pixel(x-j,i,1);
}
}
for(j=1;j<=depth;j++)
{
for(i=x-j;i<=(x-j+width);i++)
{
glcd_pixel(i,y+height+j,color);
}
}
}
//****************************************************************************//
// Purpose: Draw a segment of a circle on a graphic LCD //
// Inputs: (x,y) - The center of the circle //
// radius - The radius of the circle //
// angle_start - Start point angle of segment of circle //
// angle_end - End point angle of segment of circle //
// //
// Example: (angle_start = 0 & angle_end = 360 draws a normal circle) //
// (angle_start = 0 & angle_end = 180 draws half circle (arc) )//
// //
// color - ON or OFF //
// Dependencies: glcd_pixel(), <math.h> //
//****************************************************************************//
void glcd_circle_seg(int x, int y, int radius, int angle_start, int angle_end, int color)
{
int x_round, y_round;
float angle;
#define DEGREE 2*3.14159265/360
for (angle = (float)angle_start; angle <= angle_end; angle += .9)
{
x_round = (sin (angle * DEGREE) * radius);
y_round = (cos (angle * DEGREE) * radius);
glcd_pixel(x + x_round, y + y_round, color);
}
}
void glcd_text57(int8 x, int8 y, char* textptr, int8 size, int1 color)
#endif
{
int8 j, k, l, m; // Loop counters
int8 pixelData[5]; // Stores character data
for(; *textptr != '\0'; ++textptr, ++x)// Loop through the passed string
{
if(*textptr < 'S') // Checks if the letter is in the first font array
memcpy(pixelData, FONT[*textptr - ' '], 5);
else if(*textptr <= '~') // Check if the letter is in the second font array
memcpy(pixelData, FONT2[*textptr - 'S'], 5);
else
memcpy(pixelData, FONT[0], 5); // Default to space
// Handles newline and carriage returns
switch(*textptr)
{
case '\n':
y += 7*size + 1;
continue;
case '\r':
x = 0;
continue;
}
if(x+5*size >= GLCD_WIDTH) // Performs character wrapping
{
x = 0; // Set x at far left position
y += 7*size + 1; // Set y at next position down
}
for(j=0; j<5; ++j, x+=size) // Loop through character byte data
{
for(k=0; k < 7; ++k) // Loop through the vertical pixels
{
if(bit_test(pixelData[j], k)) // Check if the pixel should be set
{
for(l=0; l < size; ++l) // These two loops change the
{ // character's size
for(m=0; m < size; ++m)
{
glcd_pixel(x+m, y+k*size+l, color); // Draws the pixel
}
}
}
}
}
}
}
//****************************************************************************//
// Purpose: Write text on a graphic LCD //
// Inputs: (x,y) - The upper left coordinate of the first letter //
// textptr - A pointer to an array of text to display //
// size - The size of the text: 1 = 5x7, 2 = 10x14, ... //
// color - ON or OFF //
// Dependencies: glcd_pixel() //
//****************************************************************************//
void glcd_text57(int x, int y, char* textptr, int size, int color)
{
int j, k, l, m; // Contadores de bucle
uint8 pixelData[5]; // Datos a imprimir
for(; *textptr != '\0'; ++textptr, ++x) // Bucle sobre las letras a escribir
{
if(*textptr < 'S') // Compruebo si estoy en el primer vector de letras
memcpy(pixelData, FONT[*textptr - ' '],5);
else if(*textptr <= '~') // Compruebo si salte al segundo vector de letras
memcpy(pixelData, FONT2[*textptr - 'S'],5);
else
memcpy(pixelData, FONT[0], 5); // Definido para el espacio
// cambio de linea y retorno de carro
switch(*textptr)
{
case '\n':
y += 7*size + 1;
continue;
case '\r':
x = 0;
continue;
}
if(x+5*size >= GLCD_WIDTH) // Performs character wrapping
{
x = 0; // Set x at far left position
y += 7*size + 1; // Set y at next position down
}
for(j=0; j<5; ++j, x+=size) // Loop through character byte data
{
for(k=0; k < 7; ++k) // Loop through the vertical pixels
{
if(((pixelData[j] & (1<<k)) != 0)) // Check if the pixel should be set
{
for(l=0; l < size; ++l) // These two loops change the
{ // character's size
for(m=0; m < size; ++m)
{
glcd_pixel(x+m, y+k*size+l, color); // Draws the pixel
}
}
}
}
}
}
}
void glcd_rect(int8 x1, int8 y1, int8 x2, int8 y2, int1 fill, int1 color)
#endif
{
if(fill)
{
#ifdef LARGE_LCD
int16 i, xmin, xmax, ymin, ymax;
#else
int8 i, xmin, xmax, ymin, ymax;
#endif
if(x1 < x2) // Find x min and max
{
xmin = x1;
xmax = x2;
}
else
{
xmin = x2;
xmax = x1;
}
if(y1 < y2) // Find the y min and max
{
ymin = y1;
ymax = y2;
}
else
{
ymin = y2;
ymax = y1;
}
for(; xmin <= xmax; ++xmin)
{
for(i=ymin; i<=ymax; ++i)
{
glcd_pixel(xmin, i, color);
}
}
}
else
{
glcd_line(x1, y1, x2, y1, color); // Draw the 4 sides
glcd_line(x1, y2, x2, y2, color);
glcd_line(x1, y1, x1, y2, color);
glcd_line(x2, y1, x2, y2, color);
}
}
void glcd_circle(int8 x, int8 y, int8 radius, int1 fill, int1 color)
#endif
{
#ifdef LARGE_LCD
signed int16 a, b, P;
#else
signed int8 a, b, P;
#endif
a = 0;
b = radius;
P = 1 - radius;
do
{
if(fill)
{
glcd_line(x-a, y+b, x+a, y+b, color);
glcd_line(x-a, y-b, x+a, y-b, color);
glcd_line(x-b, y+a, x+b, y+a, color);
glcd_line(x-b, y-a, x+b, y-a, color);
}
else
{
glcd_pixel(a+x, b+y, color);
glcd_pixel(b+x, a+y, color);
glcd_pixel(x-a, b+y, color);
glcd_pixel(x-b, a+y, color);
glcd_pixel(b+x, y-a, color);
glcd_pixel(a+x, y-b, color);
glcd_pixel(x-a, y-b, color);
glcd_pixel(x-b, y-a, color);
}
if(P < 0)
P += 3 + 2 * a++;
else
P += 5 + 2 * (a++ - b--);
} while(a <= b);
}
// Purpose: Write text on a graphic LCD
// Inputs: (x,y) - The upper left coordinate of the first letter
// textptr - A pointer to an array of text to display
// size - The size of the text: 1 = 5x7, 2 = 10x14, ...
// color - ON or OFF
void glcd_text57(int x, int y, char* textptr, int size, int1 color)
{
int i, j, k, l, m; // Loop counters
BYTE pixelData[5]; // Stores character data
for(i=0; textptr[i] != '\0'; ++i, ++x) // Loop through the passed string
{
if(textptr[i] < 'S') // Checks if the letter is in the first text array
memcpy(pixelData, TEXT[textptr[i]-' '], 5);
else if(textptr[i] <= '~') // Check if the letter is in the second array
memcpy(pixelData, TEXT2[textptr[i]-'S'], 5);
else
memcpy(pixelData, TEXT[0], 5); // Default to space
if(x+5*size >= GLCD_WIDTH) // Performs character wrapping
{
x = 0; // Set x at far left position
y += 7*size + 1; // Set y at next position down
}
for(j=0; j<5; ++j, x+=size) // Loop through character byte data
{
for(k=0; k<7*size; ++k) // Loop through the vertical pixels
{
if(bit_test(pixelData[j], k)) // Check if the pixel should be set
{
for(l=0; l<size; ++l) // The next two loops change the
{ // character's size
for(m=0; m<size; ++m)
{
glcd_pixel(x+m, y+k*size+l, color); // Draws the pixel
}
}
}
}
}
}
}
void glcd_line(int8 x1, int8 y1, int8 x2, int8 y2, int1 color)
#endif
{
int16 dy, dx;
signed int8 addx=1, addy=1;
signed int16 P, diff;
#ifdef LARGE_LCD
int16 i=0;
dx = abs((signed int16)(x2 - x1));
dy = abs((signed int16)(y2 - y1));
#else
int8 i=0;
dx = abs((signed int8)(x2 - x1));
dy = abs((signed int8)(y2 - y1));
#endif
if(x1 > x2)
addx = -1;
if(y1 > y2)
addy = -1;
if(dx >= dy)
{
dy *= 2;
P = dy - dx;
diff = P - dx;
for(; i<=dx; ++i)
{
glcd_pixel(x1, y1, color);
if(P < 0)
{
P += dy;
x1 += addx;
}
else
{
P += diff;
x1 += addx;
y1 += addy;
}
}
}
else
{
dx *= 2;
P = dx - dy;
diff = P - dy;
for(; i<=dy; ++i)
{
glcd_pixel(x1, y1, color);
if(P < 0)
{
P += dx;
y1 += addy;
}
else
{
P += diff;
x1 += addx;
y1 += addy;
}
}
}
}
// Purpose: Draw a line on a graphic LCD using Bresenham's
// line drawing algorithm
// Inputs: (x1, y1) - the start coordinate
// (x2, y2) - the end coordinate
// color - ON or OFF
// Dependencies: glcd_pixel()
void glcd_line(int x1, int y1, int x2, int y2, int1 color)
{
signed int x, y, addx, addy, dx, dy;
signed long P;
int i;
dx = abs((signed int)(x2 - x1));
dy = abs((signed int)(y2 - y1));
x = x1;
y = y1;
if(x1 > x2)
addx = -1;
else
addx = 1;
if(y1 > y2)
addy = -1;
else
addy = 1;
if(dx >= dy)
{
P = 2*dy - dx;
for(i=0; i<=dx; ++i)
{
glcd_pixel(x, y, color);
if(P < 0)
{
P += 2*dy;
x += addx;
}
else
{
P += 2*dy - 2*dx;
x += addx;
y += addy;
}
}
}
else
{
P = 2*dx - dy;
for(i=0; i<=dy; ++i)
{
glcd_pixel(x, y, color);
if(P < 0)
{
P += 2*dx;
y += addy;
}
else
{
P += 2*dx - 2*dy;
x += addx;
y += addy;
}
}
}
}
// Purpose: Draw a bar (wide line) on a graphic LCD
// Inputs: (x1, y1) - the start coordinate
// (x2, y2) - the end coordinate
// width - The number of pixels wide
// color - ON or OFF
void glcd_bar(int x1, int y1, int x2, int y2, int width, int1 color)
{
signed int x, y, addx, addy, j;
signed long P, dx, dy, c1, c2;
int i;
dx = abs((signed int)(x2 - x1));
dy = abs((signed int)(y2 - y1));
x = x1;
y = y1;
c1 = -dx*x1 - dy*y1;
c2 = -dx*x2 - dy*y2;
if(x1 > x2)
{
addx = -1;
c1 = -dx*x2 - dy*y2;
c2 = -dx*x1 - dy*y1;
}
else
addx = 1;
if(y1 > y2)
{
addy = -1;
c1 = -dx*x2 - dy*y2;
c2 = -dx*x1 - dy*y1;
}
else
addy = 1;
if(dx >= dy)
{
P = 2*dy - dx;
for(i=0; i<=dx; ++i)
{
for(j=-(width/2); j<width/2+width%2; ++j)
{
if(dx*x+dy*(y+j)+c1 >= 0 && dx*x+dy*(y+j)+c2 <=0)
glcd_pixel(x, y+j, color);
}
if(P < 0)
{
P += 2*dy;
x += addx;
}
else
{
P += 2*dy - 2*dx;
x += addx;
y += addy;
}
}
}
else
{
P = 2*dx - dy;
for(i=0; i<=dy; ++i)
{
if(P < 0)
{
P += 2*dx;
y += addy;
}
else
{
P += 2*dx - 2*dy;
x += addx;
y += addy;
}
for(j=-(width/2); j<width/2+width%2; ++j)
{
if(dx*x+dy*(y+j)+c1 >= 0 && dx*x+dy*(y+j)+c2 <=0)
glcd_pixel(x+j, y, color);
}
}
}
}
void glcd_bar(int8 x1, int8 y1, int8 x2, int8 y2, int8 width, int1 color)
#endif
{
int8 half_width;
signed int16 dy, dx;
signed int8 addx=1, addy=1, j;
signed int16 P, diff, c1, c2;
#ifdef LARGE_LCD
int16 i=0;
dx = abs((signed int16)(x2 - x1));
dy = abs((signed int16)(y2 - y1));
#else
int8 i=0;
dx = abs((signed int8)(x2 - x1));
dy = abs((signed int8)(y2 - y1));
#endif
half_width = width/2;
c1 = -(dx*x1 + dy*y1);
c2 = -(dx*x2 + dy*y2);
if(x1 > x2)
{
signed int16 temp;
temp = c1;
c1 = c2;
c2 = temp;
addx = -1;
}
if(y1 > y2)
{
signed int16 temp;
temp = c1;
c1 = c2;
c2 = temp;
addy = -1;
}
if(dx >= dy)
{
P = 2*dy - dx;
diff = P - dx;
for(i=0; i<=dx; ++i)
{
for(j=-half_width; j<half_width+width%2; ++j)
{
#ifdef LARGE_LCD
int16 temp;
#else
int8 temp;
#endif
temp = dx*x1+dy*(y1+j); // Use more RAM to increase speed
if(temp+c1 >= 0 && temp+c2 <=0)
glcd_pixel(x1, y1+j, color);
}
if(P < 0)
{
P += 2*dy;
x1 += addx;
}
else
{
P += diff;
x1 += addx;
y1 += addy;
}
}
}
else
{
P = 2*dx - dy;
diff = P - dy;
for(i=0; i<=dy; ++i)
{
if(P < 0)
{
P += 2*dx;
y1 += addy;
}
else
{
P += diff;
x1 += addx;
y1 += addy;
}
for(j=-half_width; j<half_width+width%2; ++j)
{
#ifdef LARGE_LCD
int16 temp;
#else
int8 temp;
#endif
temp = dx*x1+dy*(y1+j); // Use more RAM to increase speed
if(temp+c1 >= 0 && temp+c2 <=0)
glcd_pixel(x1+j, y1, color);
}
}
}
}
